mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 00:34:20 +08:00
9e4db1c3ee
Pull ARM platform updates from Russell King: "This covers platform stuff for platforms I have a direct interest in (iow, I have the hardware). Essentially: - as we no longer support any other Acorn platforms other than RiscPC anymore, we can collect all that code into mach-rpc. - convert Acorn expansion card stuff to use IRQ allocation functions, and get rid of NO_IRQ from there. - cleanups to the ebsa110 platform to move some private stuff out of its header files. - large amount of SA11x0 updates: - conversion of private DMA implementation to DMA engine support (this actually gives us greater flexibility in drivers over the old API.) - re-worked ucb1x00 updates - convert to genirq, remove sa11x0 dependencies, fix various minor issues - move platform specific sa11x0 framebuffer data into platform files in arch/arm instead of keeping this in the driver itself - update sa11x0 IrDA driver for DMA engine, and allow it to use DMA for SIR transmissions as well as FIR - rework sa1111 support for genirq, and irq allocation - fix sa1111 IRQ support so it works again - use sparse IRQ support After this, I have one more pull request remaining from my current set, which I think is going to be the most problematical as it generates 8 conflicts." Fixed up the trivial conflict in arch/arm/mach-rpc/Makefile as per Russell. * 'platforms' of git://git.linaro.org/people/rmk/linux-arm: (125 commits) ARM: 7343/1: sa11x0: convert to sparse IRQ ARM: 7342/2: sa1100: prepare for sparse irq conversion ARM: 7341/1: input: prepare jornada720 keyboard and ts for sa11x0 sparse irq ARM: 7340/1: rtc: sa1100: include mach/irqs.h instead of asm/irq.h ARM: sa11x0: remove unused DMA controller definitions ARM: sa11x0: remove old SoC private DMA driver USB: sa1111: add hcd .reset method USB: sa1111: add OHCI shutdown methods USB: sa1111: reorganize ohci-sa1111.c USB: sa1111: get rid of nasty printk(KERN_DEBUG "%s: ...", __FILE__) USB: sa1111: sparse and checkpatch cleanups ARM: sa11x0: don't static map sa1111 ARM: sa1111: use dev_err() rather than printk() ARM: sa1111: cleanup sub-device registration and unregistration ARM: sa1111: only setup DMA for DMA capable devices ARM: sa1111: register sa1111 devices with dmabounce in bus notifier ARM: sa1111: move USB interface register definitions to ohci-sa1111.c ARM: sa1111: move PCMCIA interface register definitions to sa1111_generic.c ARM: sa1111: move PS/2 interface register definitions to sa1111p2.c ARM: sa1111: delete unused physical GPIO register definitions ...
255 lines
6.3 KiB
C
255 lines
6.3 KiB
C
/*
|
|
* linux/drivers/pcmcia/sa1111_generic.c
|
|
*
|
|
* We implement the generic parts of a SA1111 PCMCIA driver. This
|
|
* basically means we handle everything except controlling the
|
|
* power. Power is machine specific...
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <pcmcia/ss.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/hardware/sa1111.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include "sa1111_generic.h"
|
|
|
|
/*
|
|
* These are offsets from the above base.
|
|
*/
|
|
#define PCCR 0x0000
|
|
#define PCSSR 0x0004
|
|
#define PCSR 0x0008
|
|
|
|
#define PCSR_S0_READY (1<<0)
|
|
#define PCSR_S1_READY (1<<1)
|
|
#define PCSR_S0_DETECT (1<<2)
|
|
#define PCSR_S1_DETECT (1<<3)
|
|
#define PCSR_S0_VS1 (1<<4)
|
|
#define PCSR_S0_VS2 (1<<5)
|
|
#define PCSR_S1_VS1 (1<<6)
|
|
#define PCSR_S1_VS2 (1<<7)
|
|
#define PCSR_S0_WP (1<<8)
|
|
#define PCSR_S1_WP (1<<9)
|
|
#define PCSR_S0_BVD1 (1<<10)
|
|
#define PCSR_S0_BVD2 (1<<11)
|
|
#define PCSR_S1_BVD1 (1<<12)
|
|
#define PCSR_S1_BVD2 (1<<13)
|
|
|
|
#define PCCR_S0_RST (1<<0)
|
|
#define PCCR_S1_RST (1<<1)
|
|
#define PCCR_S0_FLT (1<<2)
|
|
#define PCCR_S1_FLT (1<<3)
|
|
#define PCCR_S0_PWAITEN (1<<4)
|
|
#define PCCR_S1_PWAITEN (1<<5)
|
|
#define PCCR_S0_PSE (1<<6)
|
|
#define PCCR_S1_PSE (1<<7)
|
|
|
|
#define PCSSR_S0_SLEEP (1<<0)
|
|
#define PCSSR_S1_SLEEP (1<<1)
|
|
|
|
#define IDX_IRQ_S0_READY_NINT (0)
|
|
#define IDX_IRQ_S0_CD_VALID (1)
|
|
#define IDX_IRQ_S0_BVD1_STSCHG (2)
|
|
#define IDX_IRQ_S1_READY_NINT (3)
|
|
#define IDX_IRQ_S1_CD_VALID (4)
|
|
#define IDX_IRQ_S1_BVD1_STSCHG (5)
|
|
|
|
void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
|
|
{
|
|
struct sa1111_pcmcia_socket *s = to_skt(skt);
|
|
unsigned long status = sa1111_readl(s->dev->mapbase + PCSR);
|
|
|
|
switch (skt->nr) {
|
|
case 0:
|
|
state->detect = status & PCSR_S0_DETECT ? 0 : 1;
|
|
state->ready = status & PCSR_S0_READY ? 1 : 0;
|
|
state->bvd1 = status & PCSR_S0_BVD1 ? 1 : 0;
|
|
state->bvd2 = status & PCSR_S0_BVD2 ? 1 : 0;
|
|
state->wrprot = status & PCSR_S0_WP ? 1 : 0;
|
|
state->vs_3v = status & PCSR_S0_VS1 ? 0 : 1;
|
|
state->vs_Xv = status & PCSR_S0_VS2 ? 0 : 1;
|
|
break;
|
|
|
|
case 1:
|
|
state->detect = status & PCSR_S1_DETECT ? 0 : 1;
|
|
state->ready = status & PCSR_S1_READY ? 1 : 0;
|
|
state->bvd1 = status & PCSR_S1_BVD1 ? 1 : 0;
|
|
state->bvd2 = status & PCSR_S1_BVD2 ? 1 : 0;
|
|
state->wrprot = status & PCSR_S1_WP ? 1 : 0;
|
|
state->vs_3v = status & PCSR_S1_VS1 ? 0 : 1;
|
|
state->vs_Xv = status & PCSR_S1_VS2 ? 0 : 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
|
|
{
|
|
struct sa1111_pcmcia_socket *s = to_skt(skt);
|
|
unsigned int pccr_skt_mask, pccr_set_mask, val;
|
|
unsigned long flags;
|
|
|
|
switch (skt->nr) {
|
|
case 0:
|
|
pccr_skt_mask = PCCR_S0_RST|PCCR_S0_FLT|PCCR_S0_PWAITEN|PCCR_S0_PSE;
|
|
break;
|
|
|
|
case 1:
|
|
pccr_skt_mask = PCCR_S1_RST|PCCR_S1_FLT|PCCR_S1_PWAITEN|PCCR_S1_PSE;
|
|
break;
|
|
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
pccr_set_mask = 0;
|
|
|
|
if (state->Vcc != 0)
|
|
pccr_set_mask |= PCCR_S0_PWAITEN|PCCR_S1_PWAITEN;
|
|
if (state->Vcc == 50)
|
|
pccr_set_mask |= PCCR_S0_PSE|PCCR_S1_PSE;
|
|
if (state->flags & SS_RESET)
|
|
pccr_set_mask |= PCCR_S0_RST|PCCR_S1_RST;
|
|
if (state->flags & SS_OUTPUT_ENA)
|
|
pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT;
|
|
|
|
local_irq_save(flags);
|
|
val = sa1111_readl(s->dev->mapbase + PCCR);
|
|
val &= ~pccr_skt_mask;
|
|
val |= pccr_set_mask & pccr_skt_mask;
|
|
sa1111_writel(val, s->dev->mapbase + PCCR);
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops,
|
|
int (*add)(struct soc_pcmcia_socket *))
|
|
{
|
|
struct sa1111_pcmcia_socket *s;
|
|
int i, ret = 0;
|
|
|
|
ops->socket_state = sa1111_pcmcia_socket_state;
|
|
|
|
for (i = 0; i < ops->nr; i++) {
|
|
s = kzalloc(sizeof(*s), GFP_KERNEL);
|
|
if (!s)
|
|
return -ENOMEM;
|
|
|
|
s->soc.nr = ops->first + i;
|
|
soc_pcmcia_init_one(&s->soc, ops, &dev->dev);
|
|
s->dev = dev;
|
|
if (s->soc.nr) {
|
|
s->soc.socket.pci_irq = dev->irq[IDX_IRQ_S1_READY_NINT];
|
|
s->soc.stat[SOC_STAT_CD].irq = dev->irq[IDX_IRQ_S1_CD_VALID];
|
|
s->soc.stat[SOC_STAT_CD].name = "SA1111 CF card detect";
|
|
s->soc.stat[SOC_STAT_BVD1].irq = dev->irq[IDX_IRQ_S1_BVD1_STSCHG];
|
|
s->soc.stat[SOC_STAT_BVD1].name = "SA1111 CF BVD1";
|
|
} else {
|
|
s->soc.socket.pci_irq = dev->irq[IDX_IRQ_S0_READY_NINT];
|
|
s->soc.stat[SOC_STAT_CD].irq = dev->irq[IDX_IRQ_S0_CD_VALID];
|
|
s->soc.stat[SOC_STAT_CD].name = "SA1111 PCMCIA card detect";
|
|
s->soc.stat[SOC_STAT_BVD1].irq = dev->irq[IDX_IRQ_S0_BVD1_STSCHG];
|
|
s->soc.stat[SOC_STAT_BVD1].name = "SA1111 PCMCIA BVD1";
|
|
}
|
|
|
|
ret = add(&s->soc);
|
|
if (ret == 0) {
|
|
s->next = dev_get_drvdata(&dev->dev);
|
|
dev_set_drvdata(&dev->dev, s);
|
|
} else
|
|
kfree(s);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pcmcia_probe(struct sa1111_dev *dev)
|
|
{
|
|
void __iomem *base;
|
|
int ret;
|
|
|
|
ret = sa1111_enable_device(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_set_drvdata(&dev->dev, NULL);
|
|
|
|
if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) {
|
|
sa1111_disable_device(dev);
|
|
return -EBUSY;
|
|
}
|
|
|
|
base = dev->mapbase;
|
|
|
|
/*
|
|
* Initialise the suspend state.
|
|
*/
|
|
sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR);
|
|
sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR);
|
|
|
|
#ifdef CONFIG_SA1100_BADGE4
|
|
pcmcia_badge4_init(&dev->dev);
|
|
#endif
|
|
#ifdef CONFIG_SA1100_JORNADA720
|
|
pcmcia_jornada720_init(&dev->dev);
|
|
#endif
|
|
#ifdef CONFIG_ARCH_LUBBOCK
|
|
pcmcia_lubbock_init(dev);
|
|
#endif
|
|
#ifdef CONFIG_ASSABET_NEPONSET
|
|
pcmcia_neponset_init(dev);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit pcmcia_remove(struct sa1111_dev *dev)
|
|
{
|
|
struct sa1111_pcmcia_socket *next, *s = dev_get_drvdata(&dev->dev);
|
|
|
|
dev_set_drvdata(&dev->dev, NULL);
|
|
|
|
for (; s; s = next) {
|
|
next = s->next;
|
|
soc_pcmcia_remove_one(&s->soc);
|
|
kfree(s);
|
|
}
|
|
|
|
release_mem_region(dev->res.start, 512);
|
|
sa1111_disable_device(dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct sa1111_driver pcmcia_driver = {
|
|
.drv = {
|
|
.name = "sa1111-pcmcia",
|
|
},
|
|
.devid = SA1111_DEVID_PCMCIA,
|
|
.probe = pcmcia_probe,
|
|
.remove = __devexit_p(pcmcia_remove),
|
|
};
|
|
|
|
static int __init sa1111_drv_pcmcia_init(void)
|
|
{
|
|
return sa1111_driver_register(&pcmcia_driver);
|
|
}
|
|
|
|
static void __exit sa1111_drv_pcmcia_exit(void)
|
|
{
|
|
sa1111_driver_unregister(&pcmcia_driver);
|
|
}
|
|
|
|
fs_initcall(sa1111_drv_pcmcia_init);
|
|
module_exit(sa1111_drv_pcmcia_exit);
|
|
|
|
MODULE_DESCRIPTION("SA1111 PCMCIA card socket driver");
|
|
MODULE_LICENSE("GPL");
|