mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 06:55:13 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
1818 lines
43 KiB
C
1818 lines
43 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for the OV7251 camera sensor.
|
|
*
|
|
* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2017-2018, Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
#define OV7251_SC_MODE_SELECT 0x0100
|
|
#define OV7251_SC_MODE_SELECT_SW_STANDBY 0x0
|
|
#define OV7251_SC_MODE_SELECT_STREAMING 0x1
|
|
|
|
#define OV7251_CHIP_ID_HIGH 0x300a
|
|
#define OV7251_CHIP_ID_HIGH_BYTE 0x77
|
|
#define OV7251_CHIP_ID_LOW 0x300b
|
|
#define OV7251_CHIP_ID_LOW_BYTE 0x50
|
|
#define OV7251_SC_GP_IO_IN1 0x3029
|
|
#define OV7251_AEC_EXPO_0 0x3500
|
|
#define OV7251_AEC_EXPO_1 0x3501
|
|
#define OV7251_AEC_EXPO_2 0x3502
|
|
#define OV7251_AEC_AGC_ADJ_0 0x350a
|
|
#define OV7251_AEC_AGC_ADJ_1 0x350b
|
|
#define OV7251_TIMING_FORMAT1 0x3820
|
|
#define OV7251_TIMING_FORMAT1_VFLIP BIT(2)
|
|
#define OV7251_TIMING_FORMAT2 0x3821
|
|
#define OV7251_TIMING_FORMAT2_MIRROR BIT(2)
|
|
#define OV7251_PRE_ISP_00 0x5e00
|
|
#define OV7251_PRE_ISP_00_TEST_PATTERN BIT(7)
|
|
#define OV7251_PLL1_PRE_DIV_REG 0x30b4
|
|
#define OV7251_PLL1_MULT_REG 0x30b3
|
|
#define OV7251_PLL1_DIVIDER_REG 0x30b1
|
|
#define OV7251_PLL1_PIX_DIV_REG 0x30b0
|
|
#define OV7251_PLL1_MIPI_DIV_REG 0x30b5
|
|
#define OV7251_PLL2_PRE_DIV_REG 0x3098
|
|
#define OV7251_PLL2_MULT_REG 0x3099
|
|
#define OV7251_PLL2_DIVIDER_REG 0x309d
|
|
#define OV7251_PLL2_SYS_DIV_REG 0x309a
|
|
#define OV7251_PLL2_ADC_DIV_REG 0x309b
|
|
|
|
#define OV7251_NATIVE_WIDTH 656
|
|
#define OV7251_NATIVE_HEIGHT 496
|
|
#define OV7251_ACTIVE_START_LEFT 4
|
|
#define OV7251_ACTIVE_START_TOP 4
|
|
#define OV7251_ACTIVE_WIDTH 648
|
|
#define OV7251_ACTIVE_HEIGHT 488
|
|
|
|
#define OV7251_FIXED_PPL 928
|
|
#define OV7251_TIMING_VTS_REG 0x380e
|
|
#define OV7251_TIMING_MIN_VTS 1
|
|
#define OV7251_TIMING_MAX_VTS 0xffff
|
|
#define OV7251_INTEGRATION_MARGIN 20
|
|
|
|
struct reg_value {
|
|
u16 reg;
|
|
u8 val;
|
|
};
|
|
|
|
struct ov7251_mode_info {
|
|
u32 width;
|
|
u32 height;
|
|
u32 vts;
|
|
const struct reg_value *data;
|
|
u32 data_size;
|
|
u32 pixel_clock;
|
|
u32 link_freq;
|
|
u16 exposure_max;
|
|
u16 exposure_def;
|
|
struct v4l2_fract timeperframe;
|
|
};
|
|
|
|
struct ov7251_pll1_cfg {
|
|
unsigned int pre_div;
|
|
unsigned int mult;
|
|
unsigned int div;
|
|
unsigned int pix_div;
|
|
unsigned int mipi_div;
|
|
};
|
|
|
|
struct ov7251_pll2_cfg {
|
|
unsigned int pre_div;
|
|
unsigned int mult;
|
|
unsigned int div;
|
|
unsigned int sys_div;
|
|
unsigned int adc_div;
|
|
};
|
|
|
|
/*
|
|
* Rubbish ordering, but only PLL1 needs to have a separate configuration per
|
|
* link frequency and the array member needs to be last.
|
|
*/
|
|
struct ov7251_pll_cfgs {
|
|
const struct ov7251_pll2_cfg *pll2;
|
|
const struct ov7251_pll1_cfg *pll1[];
|
|
};
|
|
|
|
enum xclk_rate {
|
|
OV7251_19_2_MHZ,
|
|
OV7251_24_MHZ,
|
|
OV7251_NUM_SUPPORTED_RATES
|
|
};
|
|
|
|
enum supported_link_freqs {
|
|
OV7251_LINK_FREQ_240_MHZ,
|
|
OV7251_LINK_FREQ_319_2_MHZ,
|
|
OV7251_NUM_SUPPORTED_LINK_FREQS
|
|
};
|
|
|
|
struct ov7251 {
|
|
struct i2c_client *i2c_client;
|
|
struct device *dev;
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_fwnode_endpoint ep;
|
|
struct v4l2_mbus_framefmt fmt;
|
|
struct v4l2_rect crop;
|
|
struct clk *xclk;
|
|
u32 xclk_freq;
|
|
|
|
struct regulator *io_regulator;
|
|
struct regulator *core_regulator;
|
|
struct regulator *analog_regulator;
|
|
|
|
const struct ov7251_pll_cfgs *pll_cfgs;
|
|
enum supported_link_freqs link_freq_idx;
|
|
const struct ov7251_mode_info *current_mode;
|
|
|
|
struct v4l2_ctrl_handler ctrls;
|
|
struct v4l2_ctrl *pixel_clock;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *gain;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *vblank;
|
|
|
|
/* Cached register values */
|
|
u8 aec_pk_manual;
|
|
u8 pre_isp_00;
|
|
u8 timing_format1;
|
|
u8 timing_format2;
|
|
|
|
struct mutex lock; /* lock to protect power state, ctrls and mode */
|
|
bool power_on;
|
|
|
|
struct gpio_desc *enable_gpio;
|
|
};
|
|
|
|
static inline struct ov7251 *to_ov7251(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct ov7251, sd);
|
|
}
|
|
|
|
static const struct ov7251_pll1_cfg ov7251_pll1_cfg_19_2_mhz_240_mhz = {
|
|
.pre_div = 0x03,
|
|
.mult = 0x4b,
|
|
.div = 0x01,
|
|
.pix_div = 0x0a,
|
|
.mipi_div = 0x05,
|
|
};
|
|
|
|
static const struct ov7251_pll1_cfg ov7251_pll1_cfg_19_2_mhz_319_2_mhz = {
|
|
.pre_div = 0x01,
|
|
.mult = 0x85,
|
|
.div = 0x04,
|
|
.pix_div = 0x0a,
|
|
.mipi_div = 0x05,
|
|
};
|
|
|
|
static const struct ov7251_pll1_cfg ov7251_pll1_cfg_24_mhz_240_mhz = {
|
|
.pre_div = 0x03,
|
|
.mult = 0x64,
|
|
.div = 0x01,
|
|
.pix_div = 0x0a,
|
|
.mipi_div = 0x05,
|
|
};
|
|
|
|
static const struct ov7251_pll1_cfg ov7251_pll1_cfg_24_mhz_319_2_mhz = {
|
|
.pre_div = 0x05,
|
|
.mult = 0x85,
|
|
.div = 0x02,
|
|
.pix_div = 0x0a,
|
|
.mipi_div = 0x05,
|
|
};
|
|
|
|
static const struct ov7251_pll2_cfg ov7251_pll2_cfg_19_2_mhz = {
|
|
.pre_div = 0x04,
|
|
.mult = 0x32,
|
|
.div = 0x00,
|
|
.sys_div = 0x05,
|
|
.adc_div = 0x04,
|
|
};
|
|
|
|
static const struct ov7251_pll2_cfg ov7251_pll2_cfg_24_mhz = {
|
|
.pre_div = 0x04,
|
|
.mult = 0x28,
|
|
.div = 0x00,
|
|
.sys_div = 0x05,
|
|
.adc_div = 0x04,
|
|
};
|
|
|
|
static const struct ov7251_pll_cfgs ov7251_pll_cfgs_19_2_mhz = {
|
|
.pll2 = &ov7251_pll2_cfg_19_2_mhz,
|
|
.pll1 = {
|
|
[OV7251_LINK_FREQ_240_MHZ] = &ov7251_pll1_cfg_19_2_mhz_240_mhz,
|
|
[OV7251_LINK_FREQ_319_2_MHZ] = &ov7251_pll1_cfg_19_2_mhz_319_2_mhz,
|
|
},
|
|
};
|
|
|
|
static const struct ov7251_pll_cfgs ov7251_pll_cfgs_24_mhz = {
|
|
.pll2 = &ov7251_pll2_cfg_24_mhz,
|
|
.pll1 = {
|
|
[OV7251_LINK_FREQ_240_MHZ] = &ov7251_pll1_cfg_24_mhz_240_mhz,
|
|
[OV7251_LINK_FREQ_319_2_MHZ] = &ov7251_pll1_cfg_24_mhz_319_2_mhz,
|
|
},
|
|
};
|
|
|
|
static const struct ov7251_pll_cfgs *ov7251_pll_cfgs[] = {
|
|
[OV7251_19_2_MHZ] = &ov7251_pll_cfgs_19_2_mhz,
|
|
[OV7251_24_MHZ] = &ov7251_pll_cfgs_24_mhz,
|
|
};
|
|
|
|
static const struct reg_value ov7251_global_init_setting[] = {
|
|
{ 0x0103, 0x01 },
|
|
{ 0x303b, 0x02 },
|
|
};
|
|
|
|
static const struct reg_value ov7251_setting_vga_30fps[] = {
|
|
{ 0x3005, 0x00 },
|
|
{ 0x3012, 0xc0 },
|
|
{ 0x3013, 0xd2 },
|
|
{ 0x3014, 0x04 },
|
|
{ 0x3016, 0xf0 },
|
|
{ 0x3017, 0xf0 },
|
|
{ 0x3018, 0xf0 },
|
|
{ 0x301a, 0xf0 },
|
|
{ 0x301b, 0xf0 },
|
|
{ 0x301c, 0xf0 },
|
|
{ 0x3023, 0x05 },
|
|
{ 0x3037, 0xf0 },
|
|
{ 0x3106, 0xda },
|
|
{ 0x3503, 0x07 },
|
|
{ 0x3509, 0x10 },
|
|
{ 0x3600, 0x1c },
|
|
{ 0x3602, 0x62 },
|
|
{ 0x3620, 0xb7 },
|
|
{ 0x3622, 0x04 },
|
|
{ 0x3626, 0x21 },
|
|
{ 0x3627, 0x30 },
|
|
{ 0x3630, 0x44 },
|
|
{ 0x3631, 0x35 },
|
|
{ 0x3634, 0x60 },
|
|
{ 0x3636, 0x00 },
|
|
{ 0x3662, 0x01 },
|
|
{ 0x3663, 0x70 },
|
|
{ 0x3664, 0x50 },
|
|
{ 0x3666, 0x0a },
|
|
{ 0x3669, 0x1a },
|
|
{ 0x366a, 0x00 },
|
|
{ 0x366b, 0x50 },
|
|
{ 0x3673, 0x01 },
|
|
{ 0x3674, 0xff },
|
|
{ 0x3675, 0x03 },
|
|
{ 0x3705, 0xc1 },
|
|
{ 0x3709, 0x40 },
|
|
{ 0x373c, 0x08 },
|
|
{ 0x3742, 0x00 },
|
|
{ 0x3757, 0xb3 },
|
|
{ 0x3788, 0x00 },
|
|
{ 0x37a8, 0x01 },
|
|
{ 0x37a9, 0xc0 },
|
|
{ 0x3800, 0x00 },
|
|
{ 0x3801, 0x04 },
|
|
{ 0x3802, 0x00 },
|
|
{ 0x3803, 0x04 },
|
|
{ 0x3804, 0x02 },
|
|
{ 0x3805, 0x8b },
|
|
{ 0x3806, 0x01 },
|
|
{ 0x3807, 0xeb },
|
|
{ 0x3808, 0x02 }, /* width high */
|
|
{ 0x3809, 0x80 }, /* width low */
|
|
{ 0x380a, 0x01 }, /* height high */
|
|
{ 0x380b, 0xe0 }, /* height low */
|
|
{ 0x380c, 0x03 }, /* total horiz timing high */
|
|
{ 0x380d, 0xa0 }, /* total horiz timing low */
|
|
{ 0x380e, 0x06 }, /* total vertical timing high */
|
|
{ 0x380f, 0xbc }, /* total vertical timing low */
|
|
{ 0x3810, 0x00 },
|
|
{ 0x3811, 0x04 },
|
|
{ 0x3812, 0x00 },
|
|
{ 0x3813, 0x05 },
|
|
{ 0x3814, 0x11 },
|
|
{ 0x3815, 0x11 },
|
|
{ 0x3820, 0x40 },
|
|
{ 0x3821, 0x00 },
|
|
{ 0x382f, 0x0e },
|
|
{ 0x3832, 0x00 },
|
|
{ 0x3833, 0x05 },
|
|
{ 0x3834, 0x00 },
|
|
{ 0x3835, 0x0c },
|
|
{ 0x3837, 0x00 },
|
|
{ 0x3b80, 0x00 },
|
|
{ 0x3b81, 0xa5 },
|
|
{ 0x3b82, 0x10 },
|
|
{ 0x3b83, 0x00 },
|
|
{ 0x3b84, 0x08 },
|
|
{ 0x3b85, 0x00 },
|
|
{ 0x3b86, 0x01 },
|
|
{ 0x3b87, 0x00 },
|
|
{ 0x3b88, 0x00 },
|
|
{ 0x3b89, 0x00 },
|
|
{ 0x3b8a, 0x00 },
|
|
{ 0x3b8b, 0x05 },
|
|
{ 0x3b8c, 0x00 },
|
|
{ 0x3b8d, 0x00 },
|
|
{ 0x3b8e, 0x00 },
|
|
{ 0x3b8f, 0x1a },
|
|
{ 0x3b94, 0x05 },
|
|
{ 0x3b95, 0xf2 },
|
|
{ 0x3b96, 0x40 },
|
|
{ 0x3c00, 0x89 },
|
|
{ 0x3c01, 0x63 },
|
|
{ 0x3c02, 0x01 },
|
|
{ 0x3c03, 0x00 },
|
|
{ 0x3c04, 0x00 },
|
|
{ 0x3c05, 0x03 },
|
|
{ 0x3c06, 0x00 },
|
|
{ 0x3c07, 0x06 },
|
|
{ 0x3c0c, 0x01 },
|
|
{ 0x3c0d, 0xd0 },
|
|
{ 0x3c0e, 0x02 },
|
|
{ 0x3c0f, 0x0a },
|
|
{ 0x4001, 0x42 },
|
|
{ 0x4004, 0x04 },
|
|
{ 0x4005, 0x00 },
|
|
{ 0x404e, 0x01 },
|
|
{ 0x4300, 0xff },
|
|
{ 0x4301, 0x00 },
|
|
{ 0x4315, 0x00 },
|
|
{ 0x4501, 0x48 },
|
|
{ 0x4600, 0x00 },
|
|
{ 0x4601, 0x4e },
|
|
{ 0x4801, 0x0f },
|
|
{ 0x4806, 0x0f },
|
|
{ 0x4819, 0xaa },
|
|
{ 0x4823, 0x3e },
|
|
{ 0x4837, 0x19 },
|
|
{ 0x4a0d, 0x00 },
|
|
{ 0x4a47, 0x7f },
|
|
{ 0x4a49, 0xf0 },
|
|
{ 0x4a4b, 0x30 },
|
|
{ 0x5000, 0x85 },
|
|
{ 0x5001, 0x80 },
|
|
};
|
|
|
|
static const struct reg_value ov7251_setting_vga_60fps[] = {
|
|
{ 0x3005, 0x00 },
|
|
{ 0x3012, 0xc0 },
|
|
{ 0x3013, 0xd2 },
|
|
{ 0x3014, 0x04 },
|
|
{ 0x3016, 0x10 },
|
|
{ 0x3017, 0x00 },
|
|
{ 0x3018, 0x00 },
|
|
{ 0x301a, 0x00 },
|
|
{ 0x301b, 0x00 },
|
|
{ 0x301c, 0x00 },
|
|
{ 0x3023, 0x05 },
|
|
{ 0x3037, 0xf0 },
|
|
{ 0x3106, 0xda },
|
|
{ 0x3503, 0x07 },
|
|
{ 0x3509, 0x10 },
|
|
{ 0x3600, 0x1c },
|
|
{ 0x3602, 0x62 },
|
|
{ 0x3620, 0xb7 },
|
|
{ 0x3622, 0x04 },
|
|
{ 0x3626, 0x21 },
|
|
{ 0x3627, 0x30 },
|
|
{ 0x3630, 0x44 },
|
|
{ 0x3631, 0x35 },
|
|
{ 0x3634, 0x60 },
|
|
{ 0x3636, 0x00 },
|
|
{ 0x3662, 0x01 },
|
|
{ 0x3663, 0x70 },
|
|
{ 0x3664, 0x50 },
|
|
{ 0x3666, 0x0a },
|
|
{ 0x3669, 0x1a },
|
|
{ 0x366a, 0x00 },
|
|
{ 0x366b, 0x50 },
|
|
{ 0x3673, 0x01 },
|
|
{ 0x3674, 0xff },
|
|
{ 0x3675, 0x03 },
|
|
{ 0x3705, 0xc1 },
|
|
{ 0x3709, 0x40 },
|
|
{ 0x373c, 0x08 },
|
|
{ 0x3742, 0x00 },
|
|
{ 0x3757, 0xb3 },
|
|
{ 0x3788, 0x00 },
|
|
{ 0x37a8, 0x01 },
|
|
{ 0x37a9, 0xc0 },
|
|
{ 0x3800, 0x00 },
|
|
{ 0x3801, 0x04 },
|
|
{ 0x3802, 0x00 },
|
|
{ 0x3803, 0x04 },
|
|
{ 0x3804, 0x02 },
|
|
{ 0x3805, 0x8b },
|
|
{ 0x3806, 0x01 },
|
|
{ 0x3807, 0xeb },
|
|
{ 0x3808, 0x02 }, /* width high */
|
|
{ 0x3809, 0x80 }, /* width low */
|
|
{ 0x380a, 0x01 }, /* height high */
|
|
{ 0x380b, 0xe0 }, /* height low */
|
|
{ 0x380c, 0x03 }, /* total horiz timing high */
|
|
{ 0x380d, 0xa0 }, /* total horiz timing low */
|
|
{ 0x380e, 0x03 }, /* total vertical timing high */
|
|
{ 0x380f, 0x5c }, /* total vertical timing low */
|
|
{ 0x3810, 0x00 },
|
|
{ 0x3811, 0x04 },
|
|
{ 0x3812, 0x00 },
|
|
{ 0x3813, 0x05 },
|
|
{ 0x3814, 0x11 },
|
|
{ 0x3815, 0x11 },
|
|
{ 0x3820, 0x40 },
|
|
{ 0x3821, 0x00 },
|
|
{ 0x382f, 0x0e },
|
|
{ 0x3832, 0x00 },
|
|
{ 0x3833, 0x05 },
|
|
{ 0x3834, 0x00 },
|
|
{ 0x3835, 0x0c },
|
|
{ 0x3837, 0x00 },
|
|
{ 0x3b80, 0x00 },
|
|
{ 0x3b81, 0xa5 },
|
|
{ 0x3b82, 0x10 },
|
|
{ 0x3b83, 0x00 },
|
|
{ 0x3b84, 0x08 },
|
|
{ 0x3b85, 0x00 },
|
|
{ 0x3b86, 0x01 },
|
|
{ 0x3b87, 0x00 },
|
|
{ 0x3b88, 0x00 },
|
|
{ 0x3b89, 0x00 },
|
|
{ 0x3b8a, 0x00 },
|
|
{ 0x3b8b, 0x05 },
|
|
{ 0x3b8c, 0x00 },
|
|
{ 0x3b8d, 0x00 },
|
|
{ 0x3b8e, 0x00 },
|
|
{ 0x3b8f, 0x1a },
|
|
{ 0x3b94, 0x05 },
|
|
{ 0x3b95, 0xf2 },
|
|
{ 0x3b96, 0x40 },
|
|
{ 0x3c00, 0x89 },
|
|
{ 0x3c01, 0x63 },
|
|
{ 0x3c02, 0x01 },
|
|
{ 0x3c03, 0x00 },
|
|
{ 0x3c04, 0x00 },
|
|
{ 0x3c05, 0x03 },
|
|
{ 0x3c06, 0x00 },
|
|
{ 0x3c07, 0x06 },
|
|
{ 0x3c0c, 0x01 },
|
|
{ 0x3c0d, 0xd0 },
|
|
{ 0x3c0e, 0x02 },
|
|
{ 0x3c0f, 0x0a },
|
|
{ 0x4001, 0x42 },
|
|
{ 0x4004, 0x04 },
|
|
{ 0x4005, 0x00 },
|
|
{ 0x404e, 0x01 },
|
|
{ 0x4300, 0xff },
|
|
{ 0x4301, 0x00 },
|
|
{ 0x4315, 0x00 },
|
|
{ 0x4501, 0x48 },
|
|
{ 0x4600, 0x00 },
|
|
{ 0x4601, 0x4e },
|
|
{ 0x4801, 0x0f },
|
|
{ 0x4806, 0x0f },
|
|
{ 0x4819, 0xaa },
|
|
{ 0x4823, 0x3e },
|
|
{ 0x4837, 0x19 },
|
|
{ 0x4a0d, 0x00 },
|
|
{ 0x4a47, 0x7f },
|
|
{ 0x4a49, 0xf0 },
|
|
{ 0x4a4b, 0x30 },
|
|
{ 0x5000, 0x85 },
|
|
{ 0x5001, 0x80 },
|
|
};
|
|
|
|
static const struct reg_value ov7251_setting_vga_90fps[] = {
|
|
{ 0x3005, 0x00 },
|
|
{ 0x3012, 0xc0 },
|
|
{ 0x3013, 0xd2 },
|
|
{ 0x3014, 0x04 },
|
|
{ 0x3016, 0x10 },
|
|
{ 0x3017, 0x00 },
|
|
{ 0x3018, 0x00 },
|
|
{ 0x301a, 0x00 },
|
|
{ 0x301b, 0x00 },
|
|
{ 0x301c, 0x00 },
|
|
{ 0x3023, 0x05 },
|
|
{ 0x3037, 0xf0 },
|
|
{ 0x3106, 0xda },
|
|
{ 0x3503, 0x07 },
|
|
{ 0x3509, 0x10 },
|
|
{ 0x3600, 0x1c },
|
|
{ 0x3602, 0x62 },
|
|
{ 0x3620, 0xb7 },
|
|
{ 0x3622, 0x04 },
|
|
{ 0x3626, 0x21 },
|
|
{ 0x3627, 0x30 },
|
|
{ 0x3630, 0x44 },
|
|
{ 0x3631, 0x35 },
|
|
{ 0x3634, 0x60 },
|
|
{ 0x3636, 0x00 },
|
|
{ 0x3662, 0x01 },
|
|
{ 0x3663, 0x70 },
|
|
{ 0x3664, 0x50 },
|
|
{ 0x3666, 0x0a },
|
|
{ 0x3669, 0x1a },
|
|
{ 0x366a, 0x00 },
|
|
{ 0x366b, 0x50 },
|
|
{ 0x3673, 0x01 },
|
|
{ 0x3674, 0xff },
|
|
{ 0x3675, 0x03 },
|
|
{ 0x3705, 0xc1 },
|
|
{ 0x3709, 0x40 },
|
|
{ 0x373c, 0x08 },
|
|
{ 0x3742, 0x00 },
|
|
{ 0x3757, 0xb3 },
|
|
{ 0x3788, 0x00 },
|
|
{ 0x37a8, 0x01 },
|
|
{ 0x37a9, 0xc0 },
|
|
{ 0x3800, 0x00 },
|
|
{ 0x3801, 0x04 },
|
|
{ 0x3802, 0x00 },
|
|
{ 0x3803, 0x04 },
|
|
{ 0x3804, 0x02 },
|
|
{ 0x3805, 0x8b },
|
|
{ 0x3806, 0x01 },
|
|
{ 0x3807, 0xeb },
|
|
{ 0x3808, 0x02 }, /* width high */
|
|
{ 0x3809, 0x80 }, /* width low */
|
|
{ 0x380a, 0x01 }, /* height high */
|
|
{ 0x380b, 0xe0 }, /* height low */
|
|
{ 0x380c, 0x03 }, /* total horiz timing high */
|
|
{ 0x380d, 0xa0 }, /* total horiz timing low */
|
|
{ 0x380e, 0x02 }, /* total vertical timing high */
|
|
{ 0x380f, 0x3c }, /* total vertical timing low */
|
|
{ 0x3810, 0x00 },
|
|
{ 0x3811, 0x04 },
|
|
{ 0x3812, 0x00 },
|
|
{ 0x3813, 0x05 },
|
|
{ 0x3814, 0x11 },
|
|
{ 0x3815, 0x11 },
|
|
{ 0x3820, 0x40 },
|
|
{ 0x3821, 0x00 },
|
|
{ 0x382f, 0x0e },
|
|
{ 0x3832, 0x00 },
|
|
{ 0x3833, 0x05 },
|
|
{ 0x3834, 0x00 },
|
|
{ 0x3835, 0x0c },
|
|
{ 0x3837, 0x00 },
|
|
{ 0x3b80, 0x00 },
|
|
{ 0x3b81, 0xa5 },
|
|
{ 0x3b82, 0x10 },
|
|
{ 0x3b83, 0x00 },
|
|
{ 0x3b84, 0x08 },
|
|
{ 0x3b85, 0x00 },
|
|
{ 0x3b86, 0x01 },
|
|
{ 0x3b87, 0x00 },
|
|
{ 0x3b88, 0x00 },
|
|
{ 0x3b89, 0x00 },
|
|
{ 0x3b8a, 0x00 },
|
|
{ 0x3b8b, 0x05 },
|
|
{ 0x3b8c, 0x00 },
|
|
{ 0x3b8d, 0x00 },
|
|
{ 0x3b8e, 0x00 },
|
|
{ 0x3b8f, 0x1a },
|
|
{ 0x3b94, 0x05 },
|
|
{ 0x3b95, 0xf2 },
|
|
{ 0x3b96, 0x40 },
|
|
{ 0x3c00, 0x89 },
|
|
{ 0x3c01, 0x63 },
|
|
{ 0x3c02, 0x01 },
|
|
{ 0x3c03, 0x00 },
|
|
{ 0x3c04, 0x00 },
|
|
{ 0x3c05, 0x03 },
|
|
{ 0x3c06, 0x00 },
|
|
{ 0x3c07, 0x06 },
|
|
{ 0x3c0c, 0x01 },
|
|
{ 0x3c0d, 0xd0 },
|
|
{ 0x3c0e, 0x02 },
|
|
{ 0x3c0f, 0x0a },
|
|
{ 0x4001, 0x42 },
|
|
{ 0x4004, 0x04 },
|
|
{ 0x4005, 0x00 },
|
|
{ 0x404e, 0x01 },
|
|
{ 0x4300, 0xff },
|
|
{ 0x4301, 0x00 },
|
|
{ 0x4315, 0x00 },
|
|
{ 0x4501, 0x48 },
|
|
{ 0x4600, 0x00 },
|
|
{ 0x4601, 0x4e },
|
|
{ 0x4801, 0x0f },
|
|
{ 0x4806, 0x0f },
|
|
{ 0x4819, 0xaa },
|
|
{ 0x4823, 0x3e },
|
|
{ 0x4837, 0x19 },
|
|
{ 0x4a0d, 0x00 },
|
|
{ 0x4a47, 0x7f },
|
|
{ 0x4a49, 0xf0 },
|
|
{ 0x4a4b, 0x30 },
|
|
{ 0x5000, 0x85 },
|
|
{ 0x5001, 0x80 },
|
|
};
|
|
|
|
static const unsigned long supported_xclk_rates[] = {
|
|
[OV7251_19_2_MHZ] = 19200000,
|
|
[OV7251_24_MHZ] = 24000000,
|
|
};
|
|
|
|
static const s64 link_freq[] = {
|
|
[OV7251_LINK_FREQ_240_MHZ] = 240000000,
|
|
[OV7251_LINK_FREQ_319_2_MHZ] = 319200000,
|
|
};
|
|
|
|
static const s64 pixel_rates[] = {
|
|
[OV7251_LINK_FREQ_240_MHZ] = 48000000,
|
|
[OV7251_LINK_FREQ_319_2_MHZ] = 63840000,
|
|
};
|
|
|
|
static const struct ov7251_mode_info ov7251_mode_info_data[] = {
|
|
{
|
|
.width = 640,
|
|
.height = 480,
|
|
.vts = 1724,
|
|
.data = ov7251_setting_vga_30fps,
|
|
.data_size = ARRAY_SIZE(ov7251_setting_vga_30fps),
|
|
.exposure_max = 1704,
|
|
.exposure_def = 504,
|
|
.timeperframe = {
|
|
.numerator = 100,
|
|
.denominator = 3000
|
|
}
|
|
},
|
|
{
|
|
.width = 640,
|
|
.height = 480,
|
|
.vts = 860,
|
|
.data = ov7251_setting_vga_60fps,
|
|
.data_size = ARRAY_SIZE(ov7251_setting_vga_60fps),
|
|
.exposure_max = 840,
|
|
.exposure_def = 504,
|
|
.timeperframe = {
|
|
.numerator = 100,
|
|
.denominator = 6014
|
|
}
|
|
},
|
|
{
|
|
.width = 640,
|
|
.height = 480,
|
|
.vts = 572,
|
|
.data = ov7251_setting_vga_90fps,
|
|
.data_size = ARRAY_SIZE(ov7251_setting_vga_90fps),
|
|
.exposure_max = 552,
|
|
.exposure_def = 504,
|
|
.timeperframe = {
|
|
.numerator = 100,
|
|
.denominator = 9043
|
|
}
|
|
},
|
|
};
|
|
|
|
static int ov7251_regulators_enable(struct ov7251 *ov7251)
|
|
{
|
|
int ret;
|
|
|
|
/* OV7251 power up sequence requires core regulator
|
|
* to be enabled not earlier than io regulator
|
|
*/
|
|
|
|
ret = regulator_enable(ov7251->io_regulator);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "set io voltage failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_enable(ov7251->analog_regulator);
|
|
if (ret) {
|
|
dev_err(ov7251->dev, "set analog voltage failed\n");
|
|
goto err_disable_io;
|
|
}
|
|
|
|
ret = regulator_enable(ov7251->core_regulator);
|
|
if (ret) {
|
|
dev_err(ov7251->dev, "set core voltage failed\n");
|
|
goto err_disable_analog;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_disable_analog:
|
|
regulator_disable(ov7251->analog_regulator);
|
|
|
|
err_disable_io:
|
|
regulator_disable(ov7251->io_regulator);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ov7251_regulators_disable(struct ov7251 *ov7251)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_disable(ov7251->core_regulator);
|
|
if (ret < 0)
|
|
dev_err(ov7251->dev, "core regulator disable failed\n");
|
|
|
|
ret = regulator_disable(ov7251->analog_regulator);
|
|
if (ret < 0)
|
|
dev_err(ov7251->dev, "analog regulator disable failed\n");
|
|
|
|
ret = regulator_disable(ov7251->io_regulator);
|
|
if (ret < 0)
|
|
dev_err(ov7251->dev, "io regulator disable failed\n");
|
|
}
|
|
|
|
static int ov7251_write_reg(struct ov7251 *ov7251, u16 reg, u8 val)
|
|
{
|
|
u8 regbuf[3];
|
|
int ret;
|
|
|
|
regbuf[0] = reg >> 8;
|
|
regbuf[1] = reg & 0xff;
|
|
regbuf[2] = val;
|
|
|
|
ret = i2c_master_send(ov7251->i2c_client, regbuf, 3);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "%s: write reg error %d: reg=%x, val=%x\n",
|
|
__func__, ret, reg, val);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_write_seq_regs(struct ov7251 *ov7251, u16 reg, u8 *val,
|
|
u8 num)
|
|
{
|
|
u8 regbuf[5];
|
|
u8 nregbuf = sizeof(reg) + num * sizeof(*val);
|
|
int ret = 0;
|
|
|
|
if (nregbuf > sizeof(regbuf))
|
|
return -EINVAL;
|
|
|
|
regbuf[0] = reg >> 8;
|
|
regbuf[1] = reg & 0xff;
|
|
|
|
memcpy(regbuf + 2, val, num);
|
|
|
|
ret = i2c_master_send(ov7251->i2c_client, regbuf, nregbuf);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev,
|
|
"%s: write seq regs error %d: first reg=%x\n",
|
|
__func__, ret, reg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_read_reg(struct ov7251 *ov7251, u16 reg, u8 *val)
|
|
{
|
|
u8 regbuf[2];
|
|
int ret;
|
|
|
|
regbuf[0] = reg >> 8;
|
|
regbuf[1] = reg & 0xff;
|
|
|
|
ret = i2c_master_send(ov7251->i2c_client, regbuf, 2);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "%s: write reg error %d: reg=%x\n",
|
|
__func__, ret, reg);
|
|
return ret;
|
|
}
|
|
|
|
ret = i2c_master_recv(ov7251->i2c_client, val, 1);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "%s: read reg error %d: reg=%x\n",
|
|
__func__, ret, reg);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_pll_configure(struct ov7251 *ov7251)
|
|
{
|
|
const struct ov7251_pll_cfgs *configs;
|
|
int ret;
|
|
|
|
configs = ov7251->pll_cfgs;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL1_PRE_DIV_REG,
|
|
configs->pll1[ov7251->link_freq_idx]->pre_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL1_MULT_REG,
|
|
configs->pll1[ov7251->link_freq_idx]->mult);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL1_DIVIDER_REG,
|
|
configs->pll1[ov7251->link_freq_idx]->div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL1_PIX_DIV_REG,
|
|
configs->pll1[ov7251->link_freq_idx]->pix_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL1_MIPI_DIV_REG,
|
|
configs->pll1[ov7251->link_freq_idx]->mipi_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL2_PRE_DIV_REG,
|
|
configs->pll2->pre_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL2_MULT_REG,
|
|
configs->pll2->mult);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL2_DIVIDER_REG,
|
|
configs->pll2->div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL2_SYS_DIV_REG,
|
|
configs->pll2->sys_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PLL2_ADC_DIV_REG,
|
|
configs->pll2->adc_div);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_set_exposure(struct ov7251 *ov7251, s32 exposure)
|
|
{
|
|
u16 reg;
|
|
u8 val[3];
|
|
|
|
reg = OV7251_AEC_EXPO_0;
|
|
val[0] = (exposure & 0xf000) >> 12; /* goes to OV7251_AEC_EXPO_0 */
|
|
val[1] = (exposure & 0x0ff0) >> 4; /* goes to OV7251_AEC_EXPO_1 */
|
|
val[2] = (exposure & 0x000f) << 4; /* goes to OV7251_AEC_EXPO_2 */
|
|
|
|
return ov7251_write_seq_regs(ov7251, reg, val, 3);
|
|
}
|
|
|
|
static int ov7251_set_gain(struct ov7251 *ov7251, s32 gain)
|
|
{
|
|
u16 reg;
|
|
u8 val[2];
|
|
|
|
reg = OV7251_AEC_AGC_ADJ_0;
|
|
val[0] = (gain & 0x0300) >> 8; /* goes to OV7251_AEC_AGC_ADJ_0 */
|
|
val[1] = gain & 0xff; /* goes to OV7251_AEC_AGC_ADJ_1 */
|
|
|
|
return ov7251_write_seq_regs(ov7251, reg, val, 2);
|
|
}
|
|
|
|
static int ov7251_set_register_array(struct ov7251 *ov7251,
|
|
const struct reg_value *settings,
|
|
unsigned int num_settings)
|
|
{
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < num_settings; ++i, ++settings) {
|
|
ret = ov7251_write_reg(ov7251, settings->reg, settings->val);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_set_power_on(struct device *dev)
|
|
{
|
|
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
int ret;
|
|
u32 wait_us;
|
|
|
|
ret = ov7251_regulators_enable(ov7251);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(ov7251->xclk);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "clk prepare enable failed\n");
|
|
ov7251_regulators_disable(ov7251);
|
|
return ret;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(ov7251->enable_gpio, 1);
|
|
|
|
/* wait at least 65536 external clock cycles */
|
|
wait_us = DIV_ROUND_UP(65536 * 1000,
|
|
DIV_ROUND_UP(ov7251->xclk_freq, 1000));
|
|
usleep_range(wait_us, wait_us + 1000);
|
|
|
|
ret = ov7251_set_register_array(ov7251,
|
|
ov7251_global_init_setting,
|
|
ARRAY_SIZE(ov7251_global_init_setting));
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "error during global init\n");
|
|
gpiod_set_value_cansleep(ov7251->enable_gpio, 0);
|
|
clk_disable_unprepare(ov7251->xclk);
|
|
ov7251_regulators_disable(ov7251);
|
|
return ret;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_set_power_off(struct device *dev)
|
|
{
|
|
struct i2c_client *client = container_of(dev, struct i2c_client, dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
|
|
clk_disable_unprepare(ov7251->xclk);
|
|
gpiod_set_value_cansleep(ov7251->enable_gpio, 0);
|
|
ov7251_regulators_disable(ov7251);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_set_hflip(struct ov7251 *ov7251, s32 value)
|
|
{
|
|
u8 val = ov7251->timing_format2;
|
|
int ret;
|
|
|
|
if (value)
|
|
val |= OV7251_TIMING_FORMAT2_MIRROR;
|
|
else
|
|
val &= ~OV7251_TIMING_FORMAT2_MIRROR;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_TIMING_FORMAT2, val);
|
|
if (!ret)
|
|
ov7251->timing_format2 = val;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_set_vflip(struct ov7251 *ov7251, s32 value)
|
|
{
|
|
u8 val = ov7251->timing_format1;
|
|
int ret;
|
|
|
|
if (value)
|
|
val |= OV7251_TIMING_FORMAT1_VFLIP;
|
|
else
|
|
val &= ~OV7251_TIMING_FORMAT1_VFLIP;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_TIMING_FORMAT1, val);
|
|
if (!ret)
|
|
ov7251->timing_format1 = val;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_set_test_pattern(struct ov7251 *ov7251, s32 value)
|
|
{
|
|
u8 val = ov7251->pre_isp_00;
|
|
int ret;
|
|
|
|
if (value)
|
|
val |= OV7251_PRE_ISP_00_TEST_PATTERN;
|
|
else
|
|
val &= ~OV7251_PRE_ISP_00_TEST_PATTERN;
|
|
|
|
ret = ov7251_write_reg(ov7251, OV7251_PRE_ISP_00, val);
|
|
if (!ret)
|
|
ov7251->pre_isp_00 = val;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const char * const ov7251_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Vertical Pattern Bars",
|
|
};
|
|
|
|
static int ov7251_vts_configure(struct ov7251 *ov7251, s32 vblank)
|
|
{
|
|
u8 vts[2];
|
|
|
|
vts[0] = ((ov7251->current_mode->height + vblank) & 0xff00) >> 8;
|
|
vts[1] = ((ov7251->current_mode->height + vblank) & 0x00ff);
|
|
|
|
return ov7251_write_seq_regs(ov7251, OV7251_TIMING_VTS_REG, vts, 2);
|
|
}
|
|
|
|
static int ov7251_s_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct ov7251 *ov7251 = container_of(ctrl->handler,
|
|
struct ov7251, ctrls);
|
|
int ret;
|
|
|
|
/* If VBLANK is altered we need to update exposure to compensate */
|
|
if (ctrl->id == V4L2_CID_VBLANK) {
|
|
int exposure_max;
|
|
|
|
exposure_max = ov7251->current_mode->height + ctrl->val -
|
|
OV7251_INTEGRATION_MARGIN;
|
|
__v4l2_ctrl_modify_range(ov7251->exposure,
|
|
ov7251->exposure->minimum,
|
|
exposure_max,
|
|
ov7251->exposure->step,
|
|
min(ov7251->exposure->val,
|
|
exposure_max));
|
|
}
|
|
|
|
/* v4l2_ctrl_lock() locks our mutex */
|
|
|
|
if (!pm_runtime_get_if_in_use(ov7251->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = ov7251_set_exposure(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_GAIN:
|
|
ret = ov7251_set_gain(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = ov7251_set_test_pattern(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_HFLIP:
|
|
ret = ov7251_set_hflip(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_VFLIP:
|
|
ret = ov7251_set_vflip(ov7251, ctrl->val);
|
|
break;
|
|
case V4L2_CID_VBLANK:
|
|
ret = ov7251_vts_configure(ov7251, ctrl->val);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(ov7251->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops ov7251_ctrl_ops = {
|
|
.s_ctrl = ov7251_s_ctrl,
|
|
};
|
|
|
|
static int ov7251_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_Y10_1X10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_enum_frame_size(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->code != MEDIA_BUS_FMT_Y10_1X10)
|
|
return -EINVAL;
|
|
|
|
if (fse->index >= ARRAY_SIZE(ov7251_mode_info_data))
|
|
return -EINVAL;
|
|
|
|
fse->min_width = ov7251_mode_info_data[fse->index].width;
|
|
fse->max_width = ov7251_mode_info_data[fse->index].width;
|
|
fse->min_height = ov7251_mode_info_data[fse->index].height;
|
|
fse->max_height = ov7251_mode_info_data[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_enum_frame_ival(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
unsigned int index = fie->index;
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ov7251_mode_info_data); i++) {
|
|
if (fie->width != ov7251_mode_info_data[i].width ||
|
|
fie->height != ov7251_mode_info_data[i].height)
|
|
continue;
|
|
|
|
if (index-- == 0) {
|
|
fie->interval = ov7251_mode_info_data[i].timeperframe;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
__ov7251_get_pad_format(struct ov7251 *ov7251,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad,
|
|
enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_format(&ov7251->sd, sd_state, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &ov7251->fmt;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static int ov7251_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
format->format = *__ov7251_get_pad_format(ov7251, sd_state,
|
|
format->pad,
|
|
format->which);
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct v4l2_rect *
|
|
__ov7251_get_pad_crop(struct ov7251 *ov7251,
|
|
struct v4l2_subdev_state *sd_state,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_crop(&ov7251->sd, sd_state, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &ov7251->crop;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static inline u32 avg_fps(const struct v4l2_fract *t)
|
|
{
|
|
return (t->denominator + (t->numerator >> 1)) / t->numerator;
|
|
}
|
|
|
|
static const struct ov7251_mode_info *
|
|
ov7251_find_mode_by_ival(struct ov7251 *ov7251, struct v4l2_fract *timeperframe)
|
|
{
|
|
const struct ov7251_mode_info *mode = ov7251->current_mode;
|
|
unsigned int fps_req = avg_fps(timeperframe);
|
|
unsigned int max_dist_match = (unsigned int) -1;
|
|
unsigned int i, n = 0;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ov7251_mode_info_data); i++) {
|
|
unsigned int dist;
|
|
unsigned int fps_tmp;
|
|
|
|
if (mode->width != ov7251_mode_info_data[i].width ||
|
|
mode->height != ov7251_mode_info_data[i].height)
|
|
continue;
|
|
|
|
fps_tmp = avg_fps(&ov7251_mode_info_data[i].timeperframe);
|
|
|
|
dist = abs(fps_req - fps_tmp);
|
|
|
|
if (dist < max_dist_match) {
|
|
n = i;
|
|
max_dist_match = dist;
|
|
}
|
|
}
|
|
|
|
return &ov7251_mode_info_data[n];
|
|
}
|
|
|
|
static int ov7251_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
struct v4l2_mbus_framefmt *__format;
|
|
int vblank_max, vblank_def;
|
|
struct v4l2_rect *__crop;
|
|
const struct ov7251_mode_info *new_mode;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
|
|
__crop = __ov7251_get_pad_crop(ov7251, sd_state, format->pad,
|
|
format->which);
|
|
|
|
new_mode = v4l2_find_nearest_size(ov7251_mode_info_data,
|
|
ARRAY_SIZE(ov7251_mode_info_data),
|
|
width, height,
|
|
format->format.width, format->format.height);
|
|
|
|
__crop->width = new_mode->width;
|
|
__crop->height = new_mode->height;
|
|
|
|
if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
|
|
ret = __v4l2_ctrl_modify_range(ov7251->exposure,
|
|
1, new_mode->exposure_max,
|
|
1, new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->exposure,
|
|
new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->gain, 16);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
vblank_max = OV7251_TIMING_MAX_VTS - new_mode->height;
|
|
vblank_def = new_mode->vts - new_mode->height;
|
|
ret = __v4l2_ctrl_modify_range(ov7251->vblank,
|
|
OV7251_TIMING_MIN_VTS,
|
|
vblank_max, 1, vblank_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ov7251->current_mode = new_mode;
|
|
}
|
|
|
|
__format = __ov7251_get_pad_format(ov7251, sd_state, format->pad,
|
|
format->which);
|
|
__format->width = __crop->width;
|
|
__format->height = __crop->height;
|
|
__format->code = MEDIA_BUS_FMT_Y10_1X10;
|
|
__format->field = V4L2_FIELD_NONE;
|
|
__format->colorspace = V4L2_COLORSPACE_SRGB;
|
|
__format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
|
|
__format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
__format->colorspace, __format->ycbcr_enc);
|
|
__format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
|
|
|
|
format->format = *__format;
|
|
|
|
exit:
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_entity_init_cfg(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_state *sd_state)
|
|
{
|
|
struct v4l2_subdev_format fmt = {
|
|
.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY
|
|
: V4L2_SUBDEV_FORMAT_ACTIVE,
|
|
.format = {
|
|
.width = 640,
|
|
.height = 480
|
|
}
|
|
};
|
|
|
|
ov7251_set_format(subdev, sd_state, &fmt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
|
|
switch (sel->target) {
|
|
case V4L2_SEL_TGT_CROP_DEFAULT:
|
|
case V4L2_SEL_TGT_CROP:
|
|
mutex_lock(&ov7251->lock);
|
|
sel->r = *__ov7251_get_pad_crop(ov7251, sd_state, sel->pad,
|
|
sel->which);
|
|
mutex_unlock(&ov7251->lock);
|
|
break;
|
|
case V4L2_SEL_TGT_NATIVE_SIZE:
|
|
sel->r.top = 0;
|
|
sel->r.left = 0;
|
|
sel->r.width = OV7251_NATIVE_WIDTH;
|
|
sel->r.height = OV7251_NATIVE_HEIGHT;
|
|
break;
|
|
case V4L2_SEL_TGT_CROP_BOUNDS:
|
|
sel->r.top = OV7251_ACTIVE_START_TOP;
|
|
sel->r.left = OV7251_ACTIVE_START_LEFT;
|
|
sel->r.width = OV7251_ACTIVE_WIDTH;
|
|
sel->r.height = OV7251_ACTIVE_HEIGHT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_s_stream(struct v4l2_subdev *subdev, int enable)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(subdev);
|
|
int ret;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
|
|
if (enable) {
|
|
ret = pm_runtime_get_sync(ov7251->dev);
|
|
if (ret < 0)
|
|
goto err_power_down;
|
|
|
|
ret = ov7251_pll_configure(ov7251);
|
|
if (ret) {
|
|
dev_err(ov7251->dev, "error configuring PLLs\n");
|
|
goto err_power_down;
|
|
}
|
|
|
|
ret = ov7251_set_register_array(ov7251,
|
|
ov7251->current_mode->data,
|
|
ov7251->current_mode->data_size);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "could not set mode %dx%d\n",
|
|
ov7251->current_mode->width,
|
|
ov7251->current_mode->height);
|
|
goto err_power_down;
|
|
}
|
|
ret = __v4l2_ctrl_handler_setup(&ov7251->ctrls);
|
|
if (ret < 0) {
|
|
dev_err(ov7251->dev, "could not sync v4l2 controls\n");
|
|
goto err_power_down;
|
|
}
|
|
ret = ov7251_write_reg(ov7251, OV7251_SC_MODE_SELECT,
|
|
OV7251_SC_MODE_SELECT_STREAMING);
|
|
if (ret)
|
|
goto err_power_down;
|
|
} else {
|
|
ret = ov7251_write_reg(ov7251, OV7251_SC_MODE_SELECT,
|
|
OV7251_SC_MODE_SELECT_SW_STANDBY);
|
|
pm_runtime_put(ov7251->dev);
|
|
}
|
|
|
|
mutex_unlock(&ov7251->lock);
|
|
return ret;
|
|
|
|
err_power_down:
|
|
pm_runtime_put(ov7251->dev);
|
|
mutex_unlock(&ov7251->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_get_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(subdev);
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
fi->interval = ov7251->current_mode->timeperframe;
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_set_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_frame_interval *fi)
|
|
{
|
|
struct ov7251 *ov7251 = to_ov7251(subdev);
|
|
const struct ov7251_mode_info *new_mode;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&ov7251->lock);
|
|
new_mode = ov7251_find_mode_by_ival(ov7251, &fi->interval);
|
|
|
|
if (new_mode != ov7251->current_mode) {
|
|
ret = __v4l2_ctrl_modify_range(ov7251->exposure,
|
|
1, new_mode->exposure_max,
|
|
1, new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->exposure,
|
|
new_mode->exposure_def);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = __v4l2_ctrl_s_ctrl(ov7251->gain, 16);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ov7251->current_mode = new_mode;
|
|
}
|
|
|
|
fi->interval = ov7251->current_mode->timeperframe;
|
|
|
|
exit:
|
|
mutex_unlock(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops ov7251_video_ops = {
|
|
.s_stream = ov7251_s_stream,
|
|
.g_frame_interval = ov7251_get_frame_interval,
|
|
.s_frame_interval = ov7251_set_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops ov7251_subdev_pad_ops = {
|
|
.init_cfg = ov7251_entity_init_cfg,
|
|
.enum_mbus_code = ov7251_enum_mbus_code,
|
|
.enum_frame_size = ov7251_enum_frame_size,
|
|
.enum_frame_interval = ov7251_enum_frame_ival,
|
|
.get_fmt = ov7251_get_format,
|
|
.set_fmt = ov7251_set_format,
|
|
.get_selection = ov7251_get_selection,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops ov7251_subdev_ops = {
|
|
.video = &ov7251_video_ops,
|
|
.pad = &ov7251_subdev_pad_ops,
|
|
};
|
|
|
|
static int ov7251_check_hwcfg(struct ov7251 *ov7251)
|
|
{
|
|
struct fwnode_handle *fwnode = dev_fwnode(ov7251->dev);
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY,
|
|
};
|
|
struct fwnode_handle *endpoint;
|
|
unsigned int i, j;
|
|
int ret;
|
|
|
|
endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL);
|
|
if (!endpoint)
|
|
return -EPROBE_DEFER; /* could be provided by cio2-bridge */
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
|
|
fwnode_handle_put(endpoint);
|
|
if (ret)
|
|
return dev_err_probe(ov7251->dev, ret,
|
|
"parsing endpoint node failed\n");
|
|
|
|
if (!bus_cfg.nr_of_link_frequencies) {
|
|
ret = dev_err_probe(ov7251->dev, -EINVAL,
|
|
"no link frequencies defined\n");
|
|
goto out_free_bus_cfg;
|
|
}
|
|
|
|
for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) {
|
|
for (j = 0; j < ARRAY_SIZE(link_freq); j++)
|
|
if (bus_cfg.link_frequencies[i] == link_freq[j])
|
|
break;
|
|
|
|
if (j < ARRAY_SIZE(link_freq))
|
|
break;
|
|
}
|
|
|
|
if (i == bus_cfg.nr_of_link_frequencies) {
|
|
ret = dev_err_probe(ov7251->dev, -EINVAL,
|
|
"no supported link freq found\n");
|
|
goto out_free_bus_cfg;
|
|
}
|
|
|
|
ov7251->link_freq_idx = i;
|
|
|
|
out_free_bus_cfg:
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ov7251_detect_chip(struct ov7251 *ov7251)
|
|
{
|
|
u8 chip_id_high, chip_id_low, chip_rev;
|
|
int ret;
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_HIGH, &chip_id_high);
|
|
if (ret < 0 || chip_id_high != OV7251_CHIP_ID_HIGH_BYTE)
|
|
return dev_err_probe(ov7251->dev, -ENODEV,
|
|
"could not read ID high\n");
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_CHIP_ID_LOW, &chip_id_low);
|
|
if (ret < 0 || chip_id_low != OV7251_CHIP_ID_LOW_BYTE)
|
|
return dev_err_probe(ov7251->dev, -ENODEV,
|
|
"could not read ID low\n");
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_SC_GP_IO_IN1, &chip_rev);
|
|
if (ret < 0)
|
|
return dev_err_probe(ov7251->dev, -ENODEV,
|
|
"could not read revision\n");
|
|
chip_rev >>= 4;
|
|
|
|
dev_info(ov7251->dev,
|
|
"OV7251 revision %x (%s) detected at address 0x%02x\n",
|
|
chip_rev,
|
|
chip_rev == 0x4 ? "1A / 1B" :
|
|
chip_rev == 0x5 ? "1C / 1D" :
|
|
chip_rev == 0x6 ? "1E" :
|
|
chip_rev == 0x7 ? "1F" : "unknown",
|
|
ov7251->i2c_client->addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_init_ctrls(struct ov7251 *ov7251)
|
|
{
|
|
int vblank_max, vblank_def;
|
|
s64 pixel_rate;
|
|
int hblank;
|
|
|
|
v4l2_ctrl_handler_init(&ov7251->ctrls, 7);
|
|
ov7251->ctrls.lock = &ov7251->lock;
|
|
|
|
v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_HFLIP, 0, 1, 1, 0);
|
|
v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_VFLIP, 0, 1, 1, 0);
|
|
ov7251->exposure = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_EXPOSURE, 1, 32, 1, 32);
|
|
ov7251->gain = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_GAIN, 16, 1023, 1, 16);
|
|
v4l2_ctrl_new_std_menu_items(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(ov7251_test_pattern_menu) - 1,
|
|
0, 0, ov7251_test_pattern_menu);
|
|
|
|
pixel_rate = pixel_rates[ov7251->link_freq_idx];
|
|
ov7251->pixel_clock = v4l2_ctrl_new_std(&ov7251->ctrls,
|
|
&ov7251_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE,
|
|
pixel_rate, INT_MAX,
|
|
pixel_rate, pixel_rate);
|
|
ov7251->link_freq = v4l2_ctrl_new_int_menu(&ov7251->ctrls,
|
|
&ov7251_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE(link_freq) - 1,
|
|
ov7251->link_freq_idx,
|
|
link_freq);
|
|
if (ov7251->link_freq)
|
|
ov7251->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
if (ov7251->pixel_clock)
|
|
ov7251->pixel_clock->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
hblank = OV7251_FIXED_PPL - ov7251->current_mode->width;
|
|
ov7251->hblank = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_HBLANK, hblank, hblank, 1,
|
|
hblank);
|
|
if (ov7251->hblank)
|
|
ov7251->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
vblank_max = OV7251_TIMING_MAX_VTS - ov7251->current_mode->height;
|
|
vblank_def = ov7251->current_mode->vts - ov7251->current_mode->height;
|
|
ov7251->vblank = v4l2_ctrl_new_std(&ov7251->ctrls, &ov7251_ctrl_ops,
|
|
V4L2_CID_VBLANK,
|
|
OV7251_TIMING_MIN_VTS, vblank_max, 1,
|
|
vblank_def);
|
|
|
|
ov7251->sd.ctrl_handler = &ov7251->ctrls;
|
|
|
|
if (ov7251->ctrls.error) {
|
|
v4l2_ctrl_handler_free(&ov7251->ctrls);
|
|
return ov7251->ctrls.error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ov7251_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct ov7251 *ov7251;
|
|
unsigned int rate = 0, clk_rate = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
ov7251 = devm_kzalloc(dev, sizeof(struct ov7251), GFP_KERNEL);
|
|
if (!ov7251)
|
|
return -ENOMEM;
|
|
|
|
ov7251->i2c_client = client;
|
|
ov7251->dev = dev;
|
|
|
|
ret = ov7251_check_hwcfg(ov7251);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* get system clock (xclk) */
|
|
ov7251->xclk = devm_clk_get_optional(dev, NULL);
|
|
if (IS_ERR(ov7251->xclk))
|
|
return dev_err_probe(dev, PTR_ERR(ov7251->xclk),
|
|
"could not get xclk");
|
|
|
|
/*
|
|
* We could have either a 24MHz or 19.2MHz clock rate from either DT or
|
|
* ACPI. We also need to support the IPU3 case which will have both an
|
|
* external clock AND a clock-frequency property.
|
|
*/
|
|
ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
|
|
&rate);
|
|
if (ret && !ov7251->xclk)
|
|
return dev_err_probe(dev, ret, "invalid clock config\n");
|
|
|
|
clk_rate = clk_get_rate(ov7251->xclk);
|
|
ov7251->xclk_freq = clk_rate ? clk_rate : rate;
|
|
|
|
if (ov7251->xclk_freq == 0)
|
|
return dev_err_probe(dev, -EINVAL, "invalid clock frequency\n");
|
|
|
|
if (!ret && ov7251->xclk) {
|
|
ret = clk_set_rate(ov7251->xclk, rate);
|
|
if (ret)
|
|
return dev_err_probe(dev, ret,
|
|
"failed to set clock rate\n");
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(supported_xclk_rates); i++)
|
|
if (ov7251->xclk_freq == supported_xclk_rates[i])
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(supported_xclk_rates))
|
|
return dev_err_probe(dev, -EINVAL,
|
|
"clock rate %u Hz is unsupported\n",
|
|
ov7251->xclk_freq);
|
|
|
|
ov7251->pll_cfgs = ov7251_pll_cfgs[i];
|
|
|
|
ov7251->io_regulator = devm_regulator_get(dev, "vdddo");
|
|
if (IS_ERR(ov7251->io_regulator)) {
|
|
dev_err(dev, "cannot get io regulator\n");
|
|
return PTR_ERR(ov7251->io_regulator);
|
|
}
|
|
|
|
ov7251->core_regulator = devm_regulator_get(dev, "vddd");
|
|
if (IS_ERR(ov7251->core_regulator)) {
|
|
dev_err(dev, "cannot get core regulator\n");
|
|
return PTR_ERR(ov7251->core_regulator);
|
|
}
|
|
|
|
ov7251->analog_regulator = devm_regulator_get(dev, "vdda");
|
|
if (IS_ERR(ov7251->analog_regulator)) {
|
|
dev_err(dev, "cannot get analog regulator\n");
|
|
return PTR_ERR(ov7251->analog_regulator);
|
|
}
|
|
|
|
ov7251->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(ov7251->enable_gpio)) {
|
|
dev_err(dev, "cannot get enable gpio\n");
|
|
return PTR_ERR(ov7251->enable_gpio);
|
|
}
|
|
|
|
mutex_init(&ov7251->lock);
|
|
|
|
ov7251->current_mode = &ov7251_mode_info_data[0];
|
|
ret = ov7251_init_ctrls(ov7251);
|
|
if (ret) {
|
|
dev_err_probe(dev, ret, "error during v4l2 ctrl init\n");
|
|
goto destroy_mutex;
|
|
}
|
|
|
|
v4l2_i2c_subdev_init(&ov7251->sd, client, &ov7251_subdev_ops);
|
|
ov7251->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
ov7251->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
ov7251->sd.dev = &client->dev;
|
|
ov7251->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
ret = media_entity_pads_init(&ov7251->sd.entity, 1, &ov7251->pad);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register media entity\n");
|
|
goto free_ctrl;
|
|
}
|
|
|
|
ret = ov7251_set_power_on(ov7251->dev);
|
|
if (ret)
|
|
goto free_entity;
|
|
|
|
ret = ov7251_detect_chip(ov7251);
|
|
if (ret)
|
|
goto power_down;
|
|
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_get_noresume(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_PRE_ISP_00,
|
|
&ov7251->pre_isp_00);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not read test pattern value\n");
|
|
ret = -ENODEV;
|
|
goto err_pm_runtime;
|
|
}
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_TIMING_FORMAT1,
|
|
&ov7251->timing_format1);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not read vflip value\n");
|
|
ret = -ENODEV;
|
|
goto err_pm_runtime;
|
|
}
|
|
|
|
ret = ov7251_read_reg(ov7251, OV7251_TIMING_FORMAT2,
|
|
&ov7251->timing_format2);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not read hflip value\n");
|
|
ret = -ENODEV;
|
|
goto err_pm_runtime;
|
|
}
|
|
|
|
pm_runtime_set_autosuspend_delay(&client->dev, 1000);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
pm_runtime_put_autosuspend(&client->dev);
|
|
|
|
ret = v4l2_async_register_subdev(&ov7251->sd);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register v4l2 device\n");
|
|
goto free_entity;
|
|
}
|
|
|
|
ov7251_entity_init_cfg(&ov7251->sd, NULL);
|
|
|
|
return 0;
|
|
|
|
err_pm_runtime:
|
|
pm_runtime_disable(ov7251->dev);
|
|
pm_runtime_put_noidle(ov7251->dev);
|
|
power_down:
|
|
ov7251_set_power_off(ov7251->dev);
|
|
free_entity:
|
|
media_entity_cleanup(&ov7251->sd.entity);
|
|
free_ctrl:
|
|
v4l2_ctrl_handler_free(&ov7251->ctrls);
|
|
destroy_mutex:
|
|
mutex_destroy(&ov7251->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ov7251_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct ov7251 *ov7251 = to_ov7251(sd);
|
|
|
|
v4l2_async_unregister_subdev(&ov7251->sd);
|
|
media_entity_cleanup(&ov7251->sd.entity);
|
|
v4l2_ctrl_handler_free(&ov7251->ctrls);
|
|
mutex_destroy(&ov7251->lock);
|
|
|
|
pm_runtime_disable(ov7251->dev);
|
|
if (!pm_runtime_status_suspended(ov7251->dev))
|
|
ov7251_set_power_off(ov7251->dev);
|
|
pm_runtime_set_suspended(ov7251->dev);
|
|
}
|
|
|
|
static const struct dev_pm_ops ov7251_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(ov7251_set_power_off, ov7251_set_power_on, NULL)
|
|
};
|
|
|
|
static const struct of_device_id ov7251_of_match[] = {
|
|
{ .compatible = "ovti,ov7251" },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ov7251_of_match);
|
|
|
|
static const struct acpi_device_id ov7251_acpi_match[] = {
|
|
{ "INT347E" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, ov7251_acpi_match);
|
|
|
|
static struct i2c_driver ov7251_i2c_driver = {
|
|
.driver = {
|
|
.of_match_table = ov7251_of_match,
|
|
.acpi_match_table = ov7251_acpi_match,
|
|
.name = "ov7251",
|
|
.pm = &ov7251_pm_ops,
|
|
},
|
|
.probe_new = ov7251_probe,
|
|
.remove = ov7251_remove,
|
|
};
|
|
|
|
module_i2c_driver(ov7251_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Omnivision OV7251 Camera Driver");
|
|
MODULE_AUTHOR("Todor Tomov <todor.tomov@linaro.org>");
|
|
MODULE_LICENSE("GPL v2");
|