mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-15 15:04:27 +08:00
ed5c2f5fd1
The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
1217 lines
27 KiB
C
1217 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
// Copyright (c) 2019 Intel Corporation.
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
|
|
#define HI556_REG_VALUE_08BIT 1
|
|
#define HI556_REG_VALUE_16BIT 2
|
|
#define HI556_REG_VALUE_24BIT 3
|
|
|
|
#define HI556_LINK_FREQ_437MHZ 437000000ULL
|
|
#define HI556_MCLK 19200000
|
|
#define HI556_DATA_LANES 2
|
|
#define HI556_RGB_DEPTH 10
|
|
|
|
#define HI556_REG_CHIP_ID 0x0f16
|
|
#define HI556_CHIP_ID 0x0556
|
|
|
|
#define HI556_REG_MODE_SELECT 0x0a00
|
|
#define HI556_MODE_STANDBY 0x0000
|
|
#define HI556_MODE_STREAMING 0x0100
|
|
|
|
/* vertical-timings from sensor */
|
|
#define HI556_REG_FLL 0x0006
|
|
#define HI556_FLL_30FPS 0x0814
|
|
#define HI556_FLL_30FPS_MIN 0x0814
|
|
#define HI556_FLL_MAX 0x7fff
|
|
|
|
/* horizontal-timings from sensor */
|
|
#define HI556_REG_LLP 0x0008
|
|
|
|
/* Exposure controls from sensor */
|
|
#define HI556_REG_EXPOSURE 0x0074
|
|
#define HI556_EXPOSURE_MIN 6
|
|
#define HI556_EXPOSURE_MAX_MARGIN 2
|
|
#define HI556_EXPOSURE_STEP 1
|
|
|
|
/* Analog gain controls from sensor */
|
|
#define HI556_REG_ANALOG_GAIN 0x0077
|
|
#define HI556_ANAL_GAIN_MIN 0
|
|
#define HI556_ANAL_GAIN_MAX 240
|
|
#define HI556_ANAL_GAIN_STEP 1
|
|
|
|
/* Digital gain controls from sensor */
|
|
#define HI556_REG_MWB_GR_GAIN 0x0078
|
|
#define HI556_REG_MWB_GB_GAIN 0x007a
|
|
#define HI556_REG_MWB_R_GAIN 0x007c
|
|
#define HI556_REG_MWB_B_GAIN 0x007e
|
|
#define HI556_DGTL_GAIN_MIN 0
|
|
#define HI556_DGTL_GAIN_MAX 2048
|
|
#define HI556_DGTL_GAIN_STEP 1
|
|
#define HI556_DGTL_GAIN_DEFAULT 256
|
|
|
|
/* Test Pattern Control */
|
|
#define HI556_REG_ISP 0X0a05
|
|
#define HI556_REG_ISP_TPG_EN 0x01
|
|
#define HI556_REG_TEST_PATTERN 0x0201
|
|
|
|
enum {
|
|
HI556_LINK_FREQ_437MHZ_INDEX,
|
|
};
|
|
|
|
struct hi556_reg {
|
|
u16 address;
|
|
u16 val;
|
|
};
|
|
|
|
struct hi556_reg_list {
|
|
u32 num_of_regs;
|
|
const struct hi556_reg *regs;
|
|
};
|
|
|
|
struct hi556_link_freq_config {
|
|
const struct hi556_reg_list reg_list;
|
|
};
|
|
|
|
struct hi556_mode {
|
|
/* Frame width in pixels */
|
|
u32 width;
|
|
|
|
/* Frame height in pixels */
|
|
u32 height;
|
|
|
|
/* Horizontal timining size */
|
|
u32 llp;
|
|
|
|
/* Default vertical timining size */
|
|
u32 fll_def;
|
|
|
|
/* Min vertical timining size */
|
|
u32 fll_min;
|
|
|
|
/* Link frequency needed for this resolution */
|
|
u32 link_freq_index;
|
|
|
|
/* Sensor register settings for this resolution */
|
|
const struct hi556_reg_list reg_list;
|
|
};
|
|
|
|
#define to_hi556(_sd) container_of(_sd, struct hi556, sd)
|
|
|
|
//SENSOR_INITIALIZATION
|
|
static const struct hi556_reg mipi_data_rate_874mbps[] = {
|
|
{0x0e00, 0x0102},
|
|
{0x0e02, 0x0102},
|
|
{0x0e0c, 0x0100},
|
|
{0x2000, 0x7400},
|
|
{0x2002, 0x001c},
|
|
{0x2004, 0x0242},
|
|
{0x2006, 0x0942},
|
|
{0x2008, 0x7007},
|
|
{0x200a, 0x0fd9},
|
|
{0x200c, 0x0259},
|
|
{0x200e, 0x7008},
|
|
{0x2010, 0x160e},
|
|
{0x2012, 0x0047},
|
|
{0x2014, 0x2118},
|
|
{0x2016, 0x0041},
|
|
{0x2018, 0x00d8},
|
|
{0x201a, 0x0145},
|
|
{0x201c, 0x0006},
|
|
{0x201e, 0x0181},
|
|
{0x2020, 0x13cc},
|
|
{0x2022, 0x2057},
|
|
{0x2024, 0x7001},
|
|
{0x2026, 0x0fca},
|
|
{0x2028, 0x00cb},
|
|
{0x202a, 0x009f},
|
|
{0x202c, 0x7002},
|
|
{0x202e, 0x13cc},
|
|
{0x2030, 0x019b},
|
|
{0x2032, 0x014d},
|
|
{0x2034, 0x2987},
|
|
{0x2036, 0x2766},
|
|
{0x2038, 0x0020},
|
|
{0x203a, 0x2060},
|
|
{0x203c, 0x0e5d},
|
|
{0x203e, 0x181d},
|
|
{0x2040, 0x2066},
|
|
{0x2042, 0x20c4},
|
|
{0x2044, 0x5000},
|
|
{0x2046, 0x0005},
|
|
{0x2048, 0x0000},
|
|
{0x204a, 0x01db},
|
|
{0x204c, 0x025a},
|
|
{0x204e, 0x00c0},
|
|
{0x2050, 0x0005},
|
|
{0x2052, 0x0006},
|
|
{0x2054, 0x0ad9},
|
|
{0x2056, 0x0259},
|
|
{0x2058, 0x0618},
|
|
{0x205a, 0x0258},
|
|
{0x205c, 0x2266},
|
|
{0x205e, 0x20c8},
|
|
{0x2060, 0x2060},
|
|
{0x2062, 0x707b},
|
|
{0x2064, 0x0fdd},
|
|
{0x2066, 0x81b8},
|
|
{0x2068, 0x5040},
|
|
{0x206a, 0x0020},
|
|
{0x206c, 0x5060},
|
|
{0x206e, 0x3143},
|
|
{0x2070, 0x5081},
|
|
{0x2072, 0x025c},
|
|
{0x2074, 0x7800},
|
|
{0x2076, 0x7400},
|
|
{0x2078, 0x001c},
|
|
{0x207a, 0x0242},
|
|
{0x207c, 0x0942},
|
|
{0x207e, 0x0bd9},
|
|
{0x2080, 0x0259},
|
|
{0x2082, 0x7008},
|
|
{0x2084, 0x160e},
|
|
{0x2086, 0x0047},
|
|
{0x2088, 0x2118},
|
|
{0x208a, 0x0041},
|
|
{0x208c, 0x00d8},
|
|
{0x208e, 0x0145},
|
|
{0x2090, 0x0006},
|
|
{0x2092, 0x0181},
|
|
{0x2094, 0x13cc},
|
|
{0x2096, 0x2057},
|
|
{0x2098, 0x7001},
|
|
{0x209a, 0x0fca},
|
|
{0x209c, 0x00cb},
|
|
{0x209e, 0x009f},
|
|
{0x20a0, 0x7002},
|
|
{0x20a2, 0x13cc},
|
|
{0x20a4, 0x019b},
|
|
{0x20a6, 0x014d},
|
|
{0x20a8, 0x2987},
|
|
{0x20aa, 0x2766},
|
|
{0x20ac, 0x0020},
|
|
{0x20ae, 0x2060},
|
|
{0x20b0, 0x0e5d},
|
|
{0x20b2, 0x181d},
|
|
{0x20b4, 0x2066},
|
|
{0x20b6, 0x20c4},
|
|
{0x20b8, 0x50a0},
|
|
{0x20ba, 0x0005},
|
|
{0x20bc, 0x0000},
|
|
{0x20be, 0x01db},
|
|
{0x20c0, 0x025a},
|
|
{0x20c2, 0x00c0},
|
|
{0x20c4, 0x0005},
|
|
{0x20c6, 0x0006},
|
|
{0x20c8, 0x0ad9},
|
|
{0x20ca, 0x0259},
|
|
{0x20cc, 0x0618},
|
|
{0x20ce, 0x0258},
|
|
{0x20d0, 0x2266},
|
|
{0x20d2, 0x20c8},
|
|
{0x20d4, 0x2060},
|
|
{0x20d6, 0x707b},
|
|
{0x20d8, 0x0fdd},
|
|
{0x20da, 0x86b8},
|
|
{0x20dc, 0x50e0},
|
|
{0x20de, 0x0020},
|
|
{0x20e0, 0x5100},
|
|
{0x20e2, 0x3143},
|
|
{0x20e4, 0x5121},
|
|
{0x20e6, 0x7800},
|
|
{0x20e8, 0x3140},
|
|
{0x20ea, 0x01c4},
|
|
{0x20ec, 0x01c1},
|
|
{0x20ee, 0x01c0},
|
|
{0x20f0, 0x01c4},
|
|
{0x20f2, 0x2700},
|
|
{0x20f4, 0x3d40},
|
|
{0x20f6, 0x7800},
|
|
{0x20f8, 0xffff},
|
|
{0x27fe, 0xe000},
|
|
{0x3000, 0x60f8},
|
|
{0x3002, 0x187f},
|
|
{0x3004, 0x7060},
|
|
{0x3006, 0x0114},
|
|
{0x3008, 0x60b0},
|
|
{0x300a, 0x1473},
|
|
{0x300c, 0x0013},
|
|
{0x300e, 0x140f},
|
|
{0x3010, 0x0040},
|
|
{0x3012, 0x100f},
|
|
{0x3014, 0x60f8},
|
|
{0x3016, 0x187f},
|
|
{0x3018, 0x7060},
|
|
{0x301a, 0x0114},
|
|
{0x301c, 0x60b0},
|
|
{0x301e, 0x1473},
|
|
{0x3020, 0x0013},
|
|
{0x3022, 0x140f},
|
|
{0x3024, 0x0040},
|
|
{0x3026, 0x000f},
|
|
|
|
{0x0b00, 0x0000},
|
|
{0x0b02, 0x0045},
|
|
{0x0b04, 0xb405},
|
|
{0x0b06, 0xc403},
|
|
{0x0b08, 0x0081},
|
|
{0x0b0a, 0x8252},
|
|
{0x0b0c, 0xf814},
|
|
{0x0b0e, 0xc618},
|
|
{0x0b10, 0xa828},
|
|
{0x0b12, 0x004c},
|
|
{0x0b14, 0x4068},
|
|
{0x0b16, 0x0000},
|
|
{0x0f30, 0x5b15},
|
|
{0x0f32, 0x7067},
|
|
{0x0954, 0x0009},
|
|
{0x0956, 0x0000},
|
|
{0x0958, 0xbb80},
|
|
{0x095a, 0x5140},
|
|
{0x0c00, 0x1110},
|
|
{0x0c02, 0x0011},
|
|
{0x0c04, 0x0000},
|
|
{0x0c06, 0x0200},
|
|
{0x0c10, 0x0040},
|
|
{0x0c12, 0x0040},
|
|
{0x0c14, 0x0040},
|
|
{0x0c16, 0x0040},
|
|
{0x0a10, 0x4000},
|
|
{0x3068, 0xf800},
|
|
{0x306a, 0xf876},
|
|
{0x006c, 0x0000},
|
|
{0x005e, 0x0200},
|
|
{0x000e, 0x0100},
|
|
{0x0e0a, 0x0001},
|
|
{0x004a, 0x0100},
|
|
{0x004c, 0x0000},
|
|
{0x004e, 0x0100},
|
|
{0x000c, 0x0022},
|
|
{0x0008, 0x0b00},
|
|
{0x005a, 0x0202},
|
|
{0x0012, 0x000e},
|
|
{0x0018, 0x0a33},
|
|
{0x0022, 0x0008},
|
|
{0x0028, 0x0017},
|
|
{0x0024, 0x0028},
|
|
{0x002a, 0x002d},
|
|
{0x0026, 0x0030},
|
|
{0x002c, 0x07c9},
|
|
{0x002e, 0x1111},
|
|
{0x0030, 0x1111},
|
|
{0x0032, 0x1111},
|
|
{0x0006, 0x07bc},
|
|
{0x0a22, 0x0000},
|
|
{0x0a12, 0x0a20},
|
|
{0x0a14, 0x0798},
|
|
{0x003e, 0x0000},
|
|
{0x0074, 0x080e},
|
|
{0x0070, 0x0407},
|
|
{0x0002, 0x0000},
|
|
{0x0a02, 0x0100},
|
|
{0x0a24, 0x0100},
|
|
{0x0046, 0x0000},
|
|
{0x0076, 0x0000},
|
|
{0x0060, 0x0000},
|
|
{0x0062, 0x0530},
|
|
{0x0064, 0x0500},
|
|
{0x0066, 0x0530},
|
|
{0x0068, 0x0500},
|
|
{0x0122, 0x0300},
|
|
{0x015a, 0xff08},
|
|
{0x0804, 0x0300},
|
|
{0x0806, 0x0100},
|
|
{0x005c, 0x0102},
|
|
{0x0a1a, 0x0800},
|
|
};
|
|
|
|
static const struct hi556_reg mode_2592x1944_regs[] = {
|
|
{0x0a00, 0x0000},
|
|
{0x0b0a, 0x8252},
|
|
{0x0f30, 0x5b15},
|
|
{0x0f32, 0x7067},
|
|
{0x004a, 0x0100},
|
|
{0x004c, 0x0000},
|
|
{0x004e, 0x0100},
|
|
{0x000c, 0x0022},
|
|
{0x0008, 0x0b00},
|
|
{0x005a, 0x0202},
|
|
{0x0012, 0x000e},
|
|
{0x0018, 0x0a33},
|
|
{0x0022, 0x0008},
|
|
{0x0028, 0x0017},
|
|
{0x0024, 0x0028},
|
|
{0x002a, 0x002d},
|
|
{0x0026, 0x0030},
|
|
{0x002c, 0x07c9},
|
|
{0x002e, 0x1111},
|
|
{0x0030, 0x1111},
|
|
{0x0032, 0x1111},
|
|
{0x0006, 0x0814},
|
|
{0x0a22, 0x0000},
|
|
{0x0a12, 0x0a20},
|
|
{0x0a14, 0x0798},
|
|
{0x003e, 0x0000},
|
|
{0x0074, 0x0812},
|
|
{0x0070, 0x0409},
|
|
{0x0804, 0x0300},
|
|
{0x0806, 0x0100},
|
|
{0x0a04, 0x014a},
|
|
{0x090c, 0x0fdc},
|
|
{0x090e, 0x002d},
|
|
|
|
{0x0902, 0x4319},
|
|
{0x0914, 0xc10a},
|
|
{0x0916, 0x071f},
|
|
{0x0918, 0x0408},
|
|
{0x091a, 0x0c0d},
|
|
{0x091c, 0x0f09},
|
|
{0x091e, 0x0a00},
|
|
{0x0958, 0xbb80},
|
|
};
|
|
|
|
static const struct hi556_reg mode_1296x972_regs[] = {
|
|
{0x0a00, 0x0000},
|
|
{0x0b0a, 0x8259},
|
|
{0x0f30, 0x5b15},
|
|
{0x0f32, 0x7167},
|
|
{0x004a, 0x0100},
|
|
{0x004c, 0x0000},
|
|
{0x004e, 0x0100},
|
|
{0x000c, 0x0122},
|
|
{0x0008, 0x0b00},
|
|
{0x005a, 0x0404},
|
|
{0x0012, 0x000c},
|
|
{0x0018, 0x0a33},
|
|
{0x0022, 0x0008},
|
|
{0x0028, 0x0017},
|
|
{0x0024, 0x0022},
|
|
{0x002a, 0x002b},
|
|
{0x0026, 0x0030},
|
|
{0x002c, 0x07c9},
|
|
{0x002e, 0x3311},
|
|
{0x0030, 0x3311},
|
|
{0x0032, 0x3311},
|
|
{0x0006, 0x0814},
|
|
{0x0a22, 0x0000},
|
|
{0x0a12, 0x0510},
|
|
{0x0a14, 0x03cc},
|
|
{0x003e, 0x0000},
|
|
{0x0074, 0x0812},
|
|
{0x0070, 0x0409},
|
|
{0x0804, 0x0308},
|
|
{0x0806, 0x0100},
|
|
{0x0a04, 0x016a},
|
|
{0x090e, 0x0010},
|
|
{0x090c, 0x09c0},
|
|
|
|
{0x0902, 0x4319},
|
|
{0x0914, 0xc106},
|
|
{0x0916, 0x040e},
|
|
{0x0918, 0x0304},
|
|
{0x091a, 0x0708},
|
|
{0x091c, 0x0e06},
|
|
{0x091e, 0x0300},
|
|
{0x0958, 0xbb80},
|
|
};
|
|
|
|
static const char * const hi556_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Solid Colour",
|
|
"100% Colour Bars",
|
|
"Fade To Grey Colour Bars",
|
|
"PN9",
|
|
"Gradient Horizontal",
|
|
"Gradient Vertical",
|
|
"Check Board",
|
|
"Slant Pattern",
|
|
};
|
|
|
|
static const s64 link_freq_menu_items[] = {
|
|
HI556_LINK_FREQ_437MHZ,
|
|
};
|
|
|
|
static const struct hi556_link_freq_config link_freq_configs[] = {
|
|
[HI556_LINK_FREQ_437MHZ_INDEX] = {
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mipi_data_rate_874mbps),
|
|
.regs = mipi_data_rate_874mbps,
|
|
}
|
|
}
|
|
};
|
|
|
|
static const struct hi556_mode supported_modes[] = {
|
|
{
|
|
.width = 2592,
|
|
.height = 1944,
|
|
.fll_def = HI556_FLL_30FPS,
|
|
.fll_min = HI556_FLL_30FPS_MIN,
|
|
.llp = 0x0b00,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_2592x1944_regs),
|
|
.regs = mode_2592x1944_regs,
|
|
},
|
|
.link_freq_index = HI556_LINK_FREQ_437MHZ_INDEX,
|
|
},
|
|
{
|
|
.width = 1296,
|
|
.height = 972,
|
|
.fll_def = HI556_FLL_30FPS,
|
|
.fll_min = HI556_FLL_30FPS_MIN,
|
|
.llp = 0x0b00,
|
|
.reg_list = {
|
|
.num_of_regs = ARRAY_SIZE(mode_1296x972_regs),
|
|
.regs = mode_1296x972_regs,
|
|
},
|
|
.link_freq_index = HI556_LINK_FREQ_437MHZ_INDEX,
|
|
}
|
|
};
|
|
|
|
struct hi556 {
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_ctrl_handler ctrl_handler;
|
|
|
|
/* V4L2 Controls */
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *exposure;
|
|
|
|
/* Current mode */
|
|
const struct hi556_mode *cur_mode;
|
|
|
|
/* To serialize asynchronus callbacks */
|
|
struct mutex mutex;
|
|
|
|
/* Streaming on/off */
|
|
bool streaming;
|
|
|
|
/* True if the device has been identified */
|
|
bool identified;
|
|
};
|
|
|
|
static u64 to_pixel_rate(u32 f_index)
|
|
{
|
|
u64 pixel_rate = link_freq_menu_items[f_index] * 2 * HI556_DATA_LANES;
|
|
|
|
do_div(pixel_rate, HI556_RGB_DEPTH);
|
|
|
|
return pixel_rate;
|
|
}
|
|
|
|
static int hi556_read_reg(struct hi556 *hi556, u16 reg, u16 len, u32 *val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd);
|
|
struct i2c_msg msgs[2];
|
|
u8 addr_buf[2];
|
|
u8 data_buf[4] = {0};
|
|
int ret;
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, addr_buf);
|
|
msgs[0].addr = client->addr;
|
|
msgs[0].flags = 0;
|
|
msgs[0].len = sizeof(addr_buf);
|
|
msgs[0].buf = addr_buf;
|
|
msgs[1].addr = client->addr;
|
|
msgs[1].flags = I2C_M_RD;
|
|
msgs[1].len = len;
|
|
msgs[1].buf = &data_buf[4 - len];
|
|
|
|
ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
|
|
if (ret != ARRAY_SIZE(msgs))
|
|
return -EIO;
|
|
|
|
*val = get_unaligned_be32(data_buf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_write_reg(struct hi556 *hi556, u16 reg, u16 len, u32 val)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd);
|
|
u8 buf[6];
|
|
|
|
if (len > 4)
|
|
return -EINVAL;
|
|
|
|
put_unaligned_be16(reg, buf);
|
|
put_unaligned_be32(val << 8 * (4 - len), buf + 2);
|
|
if (i2c_master_send(client, buf, len + 2) != len + 2)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_write_reg_list(struct hi556 *hi556,
|
|
const struct hi556_reg_list *r_list)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd);
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
for (i = 0; i < r_list->num_of_regs; i++) {
|
|
ret = hi556_write_reg(hi556, r_list->regs[i].address,
|
|
HI556_REG_VALUE_16BIT,
|
|
r_list->regs[i].val);
|
|
if (ret) {
|
|
dev_err_ratelimited(&client->dev,
|
|
"failed to write reg 0x%4.4x. error = %d",
|
|
r_list->regs[i].address, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_update_digital_gain(struct hi556 *hi556, u32 d_gain)
|
|
{
|
|
int ret;
|
|
|
|
ret = hi556_write_reg(hi556, HI556_REG_MWB_GR_GAIN,
|
|
HI556_REG_VALUE_16BIT, d_gain);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hi556_write_reg(hi556, HI556_REG_MWB_GB_GAIN,
|
|
HI556_REG_VALUE_16BIT, d_gain);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hi556_write_reg(hi556, HI556_REG_MWB_R_GAIN,
|
|
HI556_REG_VALUE_16BIT, d_gain);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return hi556_write_reg(hi556, HI556_REG_MWB_B_GAIN,
|
|
HI556_REG_VALUE_16BIT, d_gain);
|
|
}
|
|
|
|
static int hi556_test_pattern(struct hi556 *hi556, u32 pattern)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (pattern) {
|
|
ret = hi556_read_reg(hi556, HI556_REG_ISP,
|
|
HI556_REG_VALUE_08BIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hi556_write_reg(hi556, HI556_REG_ISP,
|
|
HI556_REG_VALUE_08BIT,
|
|
val | HI556_REG_ISP_TPG_EN);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return hi556_write_reg(hi556, HI556_REG_TEST_PATTERN,
|
|
HI556_REG_VALUE_08BIT, pattern);
|
|
}
|
|
|
|
static int hi556_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct hi556 *hi556 = container_of(ctrl->handler,
|
|
struct hi556, ctrl_handler);
|
|
struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd);
|
|
s64 exposure_max;
|
|
int ret = 0;
|
|
|
|
/* Propagate change of current control to all related controls */
|
|
if (ctrl->id == V4L2_CID_VBLANK) {
|
|
/* Update max exposure while meeting expected vblanking */
|
|
exposure_max = hi556->cur_mode->height + ctrl->val -
|
|
HI556_EXPOSURE_MAX_MARGIN;
|
|
__v4l2_ctrl_modify_range(hi556->exposure,
|
|
hi556->exposure->minimum,
|
|
exposure_max, hi556->exposure->step,
|
|
exposure_max);
|
|
}
|
|
|
|
/* V4L2 controls values will be applied only when power is already up */
|
|
if (!pm_runtime_get_if_in_use(&client->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_ANALOGUE_GAIN:
|
|
ret = hi556_write_reg(hi556, HI556_REG_ANALOG_GAIN,
|
|
HI556_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_DIGITAL_GAIN:
|
|
ret = hi556_update_digital_gain(hi556, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_EXPOSURE:
|
|
ret = hi556_write_reg(hi556, HI556_REG_EXPOSURE,
|
|
HI556_REG_VALUE_16BIT, ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_VBLANK:
|
|
/* Update FLL that meets expected vertical blanking */
|
|
ret = hi556_write_reg(hi556, HI556_REG_FLL,
|
|
HI556_REG_VALUE_16BIT,
|
|
hi556->cur_mode->height + ctrl->val);
|
|
break;
|
|
|
|
case V4L2_CID_TEST_PATTERN:
|
|
ret = hi556_test_pattern(hi556, ctrl->val);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops hi556_ctrl_ops = {
|
|
.s_ctrl = hi556_set_ctrl,
|
|
};
|
|
|
|
static int hi556_init_controls(struct hi556 *hi556)
|
|
{
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
s64 exposure_max, h_blank;
|
|
int ret;
|
|
|
|
ctrl_hdlr = &hi556->ctrl_handler;
|
|
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ctrl_hdlr->lock = &hi556->mutex;
|
|
hi556->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &hi556_ctrl_ops,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE(link_freq_menu_items) - 1,
|
|
0, link_freq_menu_items);
|
|
if (hi556->link_freq)
|
|
hi556->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
hi556->pixel_rate = v4l2_ctrl_new_std
|
|
(ctrl_hdlr, &hi556_ctrl_ops,
|
|
V4L2_CID_PIXEL_RATE, 0,
|
|
to_pixel_rate(HI556_LINK_FREQ_437MHZ_INDEX),
|
|
1,
|
|
to_pixel_rate(HI556_LINK_FREQ_437MHZ_INDEX));
|
|
hi556->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops,
|
|
V4L2_CID_VBLANK,
|
|
hi556->cur_mode->fll_min -
|
|
hi556->cur_mode->height,
|
|
HI556_FLL_MAX -
|
|
hi556->cur_mode->height, 1,
|
|
hi556->cur_mode->fll_def -
|
|
hi556->cur_mode->height);
|
|
|
|
h_blank = hi556->cur_mode->llp - hi556->cur_mode->width;
|
|
|
|
hi556->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops,
|
|
V4L2_CID_HBLANK, h_blank, h_blank, 1,
|
|
h_blank);
|
|
if (hi556->hblank)
|
|
hi556->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
|
|
HI556_ANAL_GAIN_MIN, HI556_ANAL_GAIN_MAX,
|
|
HI556_ANAL_GAIN_STEP, HI556_ANAL_GAIN_MIN);
|
|
v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
|
|
HI556_DGTL_GAIN_MIN, HI556_DGTL_GAIN_MAX,
|
|
HI556_DGTL_GAIN_STEP, HI556_DGTL_GAIN_DEFAULT);
|
|
exposure_max = hi556->cur_mode->fll_def - HI556_EXPOSURE_MAX_MARGIN;
|
|
hi556->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &hi556_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
HI556_EXPOSURE_MIN, exposure_max,
|
|
HI556_EXPOSURE_STEP,
|
|
exposure_max);
|
|
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &hi556_ctrl_ops,
|
|
V4L2_CID_TEST_PATTERN,
|
|
ARRAY_SIZE(hi556_test_pattern_menu) - 1,
|
|
0, 0, hi556_test_pattern_menu);
|
|
if (ctrl_hdlr->error)
|
|
return ctrl_hdlr->error;
|
|
|
|
hi556->sd.ctrl_handler = ctrl_hdlr;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hi556_assign_pad_format(const struct hi556_mode *mode,
|
|
struct v4l2_mbus_framefmt *fmt)
|
|
{
|
|
fmt->width = mode->width;
|
|
fmt->height = mode->height;
|
|
fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
fmt->field = V4L2_FIELD_NONE;
|
|
}
|
|
|
|
static int hi556_identify_module(struct hi556 *hi556)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd);
|
|
int ret;
|
|
u32 val;
|
|
|
|
if (hi556->identified)
|
|
return 0;
|
|
|
|
ret = hi556_read_reg(hi556, HI556_REG_CHIP_ID,
|
|
HI556_REG_VALUE_16BIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val != HI556_CHIP_ID) {
|
|
dev_err(&client->dev, "chip id mismatch: %x!=%x",
|
|
HI556_CHIP_ID, val);
|
|
return -ENXIO;
|
|
}
|
|
|
|
hi556->identified = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_start_streaming(struct hi556 *hi556)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd);
|
|
const struct hi556_reg_list *reg_list;
|
|
int link_freq_index, ret;
|
|
|
|
ret = hi556_identify_module(hi556);
|
|
if (ret)
|
|
return ret;
|
|
|
|
link_freq_index = hi556->cur_mode->link_freq_index;
|
|
reg_list = &link_freq_configs[link_freq_index].reg_list;
|
|
ret = hi556_write_reg_list(hi556, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set plls");
|
|
return ret;
|
|
}
|
|
|
|
reg_list = &hi556->cur_mode->reg_list;
|
|
ret = hi556_write_reg_list(hi556, reg_list);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set mode");
|
|
return ret;
|
|
}
|
|
|
|
ret = __v4l2_ctrl_handler_setup(hi556->sd.ctrl_handler);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = hi556_write_reg(hi556, HI556_REG_MODE_SELECT,
|
|
HI556_REG_VALUE_16BIT, HI556_MODE_STREAMING);
|
|
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to set stream");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hi556_stop_streaming(struct hi556 *hi556)
|
|
{
|
|
struct i2c_client *client = v4l2_get_subdevdata(&hi556->sd);
|
|
|
|
if (hi556_write_reg(hi556, HI556_REG_MODE_SELECT,
|
|
HI556_REG_VALUE_16BIT, HI556_MODE_STANDBY))
|
|
dev_err(&client->dev, "failed to set stream");
|
|
}
|
|
|
|
static int hi556_set_stream(struct v4l2_subdev *sd, int enable)
|
|
{
|
|
struct hi556 *hi556 = to_hi556(sd);
|
|
struct i2c_client *client = v4l2_get_subdevdata(sd);
|
|
int ret = 0;
|
|
|
|
if (hi556->streaming == enable)
|
|
return 0;
|
|
|
|
mutex_lock(&hi556->mutex);
|
|
if (enable) {
|
|
ret = pm_runtime_resume_and_get(&client->dev);
|
|
if (ret < 0) {
|
|
mutex_unlock(&hi556->mutex);
|
|
return ret;
|
|
}
|
|
|
|
ret = hi556_start_streaming(hi556);
|
|
if (ret) {
|
|
enable = 0;
|
|
hi556_stop_streaming(hi556);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
} else {
|
|
hi556_stop_streaming(hi556);
|
|
pm_runtime_put(&client->dev);
|
|
}
|
|
|
|
hi556->streaming = enable;
|
|
mutex_unlock(&hi556->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused hi556_suspend(struct device *dev)
|
|
{
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
|
struct hi556 *hi556 = to_hi556(sd);
|
|
|
|
mutex_lock(&hi556->mutex);
|
|
if (hi556->streaming)
|
|
hi556_stop_streaming(hi556);
|
|
|
|
mutex_unlock(&hi556->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused hi556_resume(struct device *dev)
|
|
{
|
|
struct v4l2_subdev *sd = dev_get_drvdata(dev);
|
|
struct hi556 *hi556 = to_hi556(sd);
|
|
int ret;
|
|
|
|
mutex_lock(&hi556->mutex);
|
|
if (hi556->streaming) {
|
|
ret = hi556_start_streaming(hi556);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
mutex_unlock(&hi556->mutex);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
hi556_stop_streaming(hi556);
|
|
hi556->streaming = 0;
|
|
mutex_unlock(&hi556->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int hi556_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct hi556 *hi556 = to_hi556(sd);
|
|
const struct hi556_mode *mode;
|
|
s32 vblank_def, h_blank;
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
ARRAY_SIZE(supported_modes), width,
|
|
height, fmt->format.width,
|
|
fmt->format.height);
|
|
|
|
mutex_lock(&hi556->mutex);
|
|
hi556_assign_pad_format(mode, &fmt->format);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
*v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) = fmt->format;
|
|
} else {
|
|
hi556->cur_mode = mode;
|
|
__v4l2_ctrl_s_ctrl(hi556->link_freq, mode->link_freq_index);
|
|
__v4l2_ctrl_s_ctrl_int64(hi556->pixel_rate,
|
|
to_pixel_rate(mode->link_freq_index));
|
|
|
|
/* Update limits and set FPS to default */
|
|
vblank_def = mode->fll_def - mode->height;
|
|
__v4l2_ctrl_modify_range(hi556->vblank,
|
|
mode->fll_min - mode->height,
|
|
HI556_FLL_MAX - mode->height, 1,
|
|
vblank_def);
|
|
__v4l2_ctrl_s_ctrl(hi556->vblank, vblank_def);
|
|
|
|
h_blank = hi556->cur_mode->llp - hi556->cur_mode->width;
|
|
|
|
__v4l2_ctrl_modify_range(hi556->hblank, h_blank, h_blank, 1,
|
|
h_blank);
|
|
}
|
|
|
|
mutex_unlock(&hi556->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
struct hi556 *hi556 = to_hi556(sd);
|
|
|
|
mutex_lock(&hi556->mutex);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
|
|
fmt->format = *v4l2_subdev_get_try_format(&hi556->sd,
|
|
sd_state,
|
|
fmt->pad);
|
|
else
|
|
hi556_assign_pad_format(hi556->cur_mode, &fmt->format);
|
|
|
|
mutex_unlock(&hi556->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_enum_frame_size(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
fse->max_width = fse->min_width;
|
|
fse->min_height = supported_modes[fse->index].height;
|
|
fse->max_height = fse->min_height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hi556_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
struct hi556 *hi556 = to_hi556(sd);
|
|
|
|
mutex_lock(&hi556->mutex);
|
|
hi556_assign_pad_format(&supported_modes[0],
|
|
v4l2_subdev_get_try_format(sd, fh->state, 0));
|
|
mutex_unlock(&hi556->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops hi556_video_ops = {
|
|
.s_stream = hi556_set_stream,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops hi556_pad_ops = {
|
|
.set_fmt = hi556_set_format,
|
|
.get_fmt = hi556_get_format,
|
|
.enum_mbus_code = hi556_enum_mbus_code,
|
|
.enum_frame_size = hi556_enum_frame_size,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops hi556_subdev_ops = {
|
|
.video = &hi556_video_ops,
|
|
.pad = &hi556_pad_ops,
|
|
};
|
|
|
|
static const struct media_entity_operations hi556_subdev_entity_ops = {
|
|
.link_validate = v4l2_subdev_link_validate,
|
|
};
|
|
|
|
static const struct v4l2_subdev_internal_ops hi556_internal_ops = {
|
|
.open = hi556_open,
|
|
};
|
|
|
|
static int hi556_check_hwcfg(struct device *dev)
|
|
{
|
|
struct fwnode_handle *ep;
|
|
struct fwnode_handle *fwnode = dev_fwnode(dev);
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY
|
|
};
|
|
u32 mclk;
|
|
int ret = 0;
|
|
unsigned int i, j;
|
|
|
|
if (!fwnode)
|
|
return -ENXIO;
|
|
|
|
ret = fwnode_property_read_u32(fwnode, "clock-frequency", &mclk);
|
|
if (ret) {
|
|
dev_err(dev, "can't get clock frequency");
|
|
return ret;
|
|
}
|
|
|
|
if (mclk != HI556_MCLK) {
|
|
dev_err(dev, "external clock %d is not supported", mclk);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
|
|
if (!ep)
|
|
return -ENXIO;
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
|
|
fwnode_handle_put(ep);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2) {
|
|
dev_err(dev, "number of CSI2 data lanes %d is not supported",
|
|
bus_cfg.bus.mipi_csi2.num_data_lanes);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
if (!bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequencies defined");
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(link_freq_menu_items); i++) {
|
|
for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
|
|
if (link_freq_menu_items[i] ==
|
|
bus_cfg.link_frequencies[j])
|
|
break;
|
|
}
|
|
|
|
if (j == bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "no link frequency %lld supported",
|
|
link_freq_menu_items[i]);
|
|
ret = -EINVAL;
|
|
goto check_hwcfg_error;
|
|
}
|
|
}
|
|
|
|
check_hwcfg_error:
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void hi556_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct hi556 *hi556 = to_hi556(sd);
|
|
|
|
v4l2_async_unregister_subdev(sd);
|
|
media_entity_cleanup(&sd->entity);
|
|
v4l2_ctrl_handler_free(sd->ctrl_handler);
|
|
pm_runtime_disable(&client->dev);
|
|
mutex_destroy(&hi556->mutex);
|
|
}
|
|
|
|
static int hi556_probe(struct i2c_client *client)
|
|
{
|
|
struct hi556 *hi556;
|
|
bool full_power;
|
|
int ret;
|
|
|
|
ret = hi556_check_hwcfg(&client->dev);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to check HW configuration: %d",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
hi556 = devm_kzalloc(&client->dev, sizeof(*hi556), GFP_KERNEL);
|
|
if (!hi556)
|
|
return -ENOMEM;
|
|
|
|
v4l2_i2c_subdev_init(&hi556->sd, client, &hi556_subdev_ops);
|
|
|
|
full_power = acpi_dev_state_d0(&client->dev);
|
|
if (full_power) {
|
|
ret = hi556_identify_module(hi556);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to find sensor: %d", ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
mutex_init(&hi556->mutex);
|
|
hi556->cur_mode = &supported_modes[0];
|
|
ret = hi556_init_controls(hi556);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init controls: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
hi556->sd.internal_ops = &hi556_internal_ops;
|
|
hi556->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
hi556->sd.entity.ops = &hi556_subdev_entity_ops;
|
|
hi556->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
hi556->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
ret = media_entity_pads_init(&hi556->sd.entity, 1, &hi556->pad);
|
|
if (ret) {
|
|
dev_err(&client->dev, "failed to init entity pads: %d", ret);
|
|
goto probe_error_v4l2_ctrl_handler_free;
|
|
}
|
|
|
|
ret = v4l2_async_register_subdev_sensor(&hi556->sd);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "failed to register V4L2 subdev: %d",
|
|
ret);
|
|
goto probe_error_media_entity_cleanup;
|
|
}
|
|
|
|
/* Set the device's state to active if it's in D0 state. */
|
|
if (full_power)
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
pm_runtime_idle(&client->dev);
|
|
|
|
return 0;
|
|
|
|
probe_error_media_entity_cleanup:
|
|
media_entity_cleanup(&hi556->sd.entity);
|
|
|
|
probe_error_v4l2_ctrl_handler_free:
|
|
v4l2_ctrl_handler_free(hi556->sd.ctrl_handler);
|
|
mutex_destroy(&hi556->mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops hi556_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(hi556_suspend, hi556_resume)
|
|
};
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id hi556_acpi_ids[] = {
|
|
{"INT3537"},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, hi556_acpi_ids);
|
|
#endif
|
|
|
|
static struct i2c_driver hi556_i2c_driver = {
|
|
.driver = {
|
|
.name = "hi556",
|
|
.pm = &hi556_pm_ops,
|
|
.acpi_match_table = ACPI_PTR(hi556_acpi_ids),
|
|
},
|
|
.probe_new = hi556_probe,
|
|
.remove = hi556_remove,
|
|
.flags = I2C_DRV_ACPI_WAIVE_D0_PROBE,
|
|
};
|
|
|
|
module_i2c_driver(hi556_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Shawn Tu <shawnx.tu@intel.com>");
|
|
MODULE_DESCRIPTION("Hynix HI556 sensor driver");
|
|
MODULE_LICENSE("GPL v2");
|