mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-05 01:54:09 +08:00
2c57d26505
Add support to STM LSM6DSOP (acc + gyro) Mems sensor https://www.st.com/resource/en/datasheet/lsm6dsop.pdf Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/d3c459ad945ccd1a256f4a217128be214b0c024e.1606642528.git.lorenzo@kernel.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
760 lines
20 KiB
C
760 lines
20 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* STMicroelectronics st_lsm6dsx FIFO buffer library driver
|
|
*
|
|
* LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
|
|
* The FIFO buffer can be configured to store data from gyroscope and
|
|
* accelerometer. Samples are queued without any tag according to a
|
|
* specific pattern based on 'FIFO data sets' (6 bytes each):
|
|
* - 1st data set is reserved for gyroscope data
|
|
* - 2nd data set is reserved for accelerometer data
|
|
* The FIFO pattern changes depending on the ODRs and decimation factors
|
|
* assigned to the FIFO data sets. The first sequence of data stored in FIFO
|
|
* buffer contains the data of all the enabled FIFO data sets
|
|
* (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
|
|
* value of the decimation factor and ODR set for each FIFO data set.
|
|
*
|
|
* LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/LSM6DSRX/ISM330DHCX/LSM6DST/LSM6DSOP:
|
|
* The FIFO buffer can be configured to store data from gyroscope and
|
|
* accelerometer. Each sample is queued with a tag (1B) indicating data
|
|
* source (gyroscope, accelerometer, hw timer).
|
|
*
|
|
* FIFO supported modes:
|
|
* - BYPASS: FIFO disabled
|
|
* - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index
|
|
* restarts from the beginning and the oldest sample is overwritten
|
|
*
|
|
* Copyright 2016 STMicroelectronics Inc.
|
|
*
|
|
* Lorenzo Bianconi <lorenzo.bianconi@st.com>
|
|
* Denis Ciocca <denis.ciocca@st.com>
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/iio/kfifo_buf.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
#include <linux/platform_data/st_sensors_pdata.h>
|
|
|
|
#include "st_lsm6dsx.h"
|
|
|
|
#define ST_LSM6DSX_REG_FIFO_MODE_ADDR 0x0a
|
|
#define ST_LSM6DSX_FIFO_MODE_MASK GENMASK(2, 0)
|
|
#define ST_LSM6DSX_FIFO_ODR_MASK GENMASK(6, 3)
|
|
#define ST_LSM6DSX_FIFO_EMPTY_MASK BIT(12)
|
|
#define ST_LSM6DSX_REG_FIFO_OUTL_ADDR 0x3e
|
|
#define ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR 0x78
|
|
#define ST_LSM6DSX_REG_TS_RESET_ADDR 0x42
|
|
|
|
#define ST_LSM6DSX_MAX_FIFO_ODR_VAL 0x08
|
|
|
|
#define ST_LSM6DSX_TS_RESET_VAL 0xaa
|
|
|
|
struct st_lsm6dsx_decimator_entry {
|
|
u8 decimator;
|
|
u8 val;
|
|
};
|
|
|
|
enum st_lsm6dsx_fifo_tag {
|
|
ST_LSM6DSX_GYRO_TAG = 0x01,
|
|
ST_LSM6DSX_ACC_TAG = 0x02,
|
|
ST_LSM6DSX_TS_TAG = 0x04,
|
|
ST_LSM6DSX_EXT0_TAG = 0x0f,
|
|
ST_LSM6DSX_EXT1_TAG = 0x10,
|
|
ST_LSM6DSX_EXT2_TAG = 0x11,
|
|
};
|
|
|
|
static const
|
|
struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
|
|
{ 0, 0x0 },
|
|
{ 1, 0x1 },
|
|
{ 2, 0x2 },
|
|
{ 3, 0x3 },
|
|
{ 4, 0x4 },
|
|
{ 8, 0x5 },
|
|
{ 16, 0x6 },
|
|
{ 32, 0x7 },
|
|
};
|
|
|
|
static int
|
|
st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
|
|
{
|
|
const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
|
|
u32 decimator = max_odr / sensor->odr;
|
|
int i;
|
|
|
|
if (decimator > 1)
|
|
decimator = round_down(decimator, 2);
|
|
|
|
for (i = 0; i < max_size; i++) {
|
|
if (st_lsm6dsx_decimator_table[i].decimator == decimator)
|
|
break;
|
|
}
|
|
|
|
sensor->decimator = decimator;
|
|
return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
|
|
}
|
|
|
|
static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
|
|
u32 *max_odr, u32 *min_odr)
|
|
{
|
|
struct st_lsm6dsx_sensor *sensor;
|
|
int i;
|
|
|
|
*max_odr = 0, *min_odr = ~0;
|
|
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
|
|
if (!hw->iio_devs[i])
|
|
continue;
|
|
|
|
sensor = iio_priv(hw->iio_devs[i]);
|
|
|
|
if (!(hw->enable_mask & BIT(sensor->id)))
|
|
continue;
|
|
|
|
*max_odr = max_t(u32, *max_odr, sensor->odr);
|
|
*min_odr = min_t(u32, *min_odr, sensor->odr);
|
|
}
|
|
}
|
|
|
|
static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
|
|
{
|
|
u8 sip = sensor->odr / min_odr;
|
|
|
|
return sip > 1 ? round_down(sip, 2) : sip;
|
|
}
|
|
|
|
static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
|
|
{
|
|
const struct st_lsm6dsx_reg *ts_dec_reg;
|
|
struct st_lsm6dsx_sensor *sensor;
|
|
u16 sip = 0, ts_sip = 0;
|
|
u32 max_odr, min_odr;
|
|
int err = 0, i;
|
|
u8 data;
|
|
|
|
st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr);
|
|
|
|
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
|
|
const struct st_lsm6dsx_reg *dec_reg;
|
|
|
|
if (!hw->iio_devs[i])
|
|
continue;
|
|
|
|
sensor = iio_priv(hw->iio_devs[i]);
|
|
/* update fifo decimators and sample in pattern */
|
|
if (hw->enable_mask & BIT(sensor->id)) {
|
|
sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr);
|
|
data = st_lsm6dsx_get_decimator_val(sensor, max_odr);
|
|
} else {
|
|
sensor->sip = 0;
|
|
data = 0;
|
|
}
|
|
ts_sip = max_t(u16, ts_sip, sensor->sip);
|
|
|
|
dec_reg = &hw->settings->decimator[sensor->id];
|
|
if (dec_reg->addr) {
|
|
int val = ST_LSM6DSX_SHIFT_VAL(data, dec_reg->mask);
|
|
|
|
err = st_lsm6dsx_update_bits_locked(hw, dec_reg->addr,
|
|
dec_reg->mask,
|
|
val);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
sip += sensor->sip;
|
|
}
|
|
hw->sip = sip + ts_sip;
|
|
hw->ts_sip = ts_sip;
|
|
|
|
/*
|
|
* update hw ts decimator if necessary. Decimator for hw timestamp
|
|
* is always 1 or 0 in order to have a ts sample for each data
|
|
* sample in FIFO
|
|
*/
|
|
ts_dec_reg = &hw->settings->ts_settings.decimator;
|
|
if (ts_dec_reg->addr) {
|
|
int val, ts_dec = !!hw->ts_sip;
|
|
|
|
val = ST_LSM6DSX_SHIFT_VAL(ts_dec, ts_dec_reg->mask);
|
|
err = st_lsm6dsx_update_bits_locked(hw, ts_dec_reg->addr,
|
|
ts_dec_reg->mask, val);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
|
|
enum st_lsm6dsx_fifo_mode fifo_mode)
|
|
{
|
|
unsigned int data;
|
|
|
|
data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
|
|
return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
|
|
ST_LSM6DSX_FIFO_MODE_MASK, data);
|
|
}
|
|
|
|
static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
|
|
bool enable)
|
|
{
|
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
|
const struct st_lsm6dsx_reg *batch_reg;
|
|
u8 data;
|
|
|
|
batch_reg = &hw->settings->batch[sensor->id];
|
|
if (batch_reg->addr) {
|
|
int val;
|
|
|
|
if (enable) {
|
|
int err;
|
|
|
|
err = st_lsm6dsx_check_odr(sensor, sensor->odr,
|
|
&data);
|
|
if (err < 0)
|
|
return err;
|
|
} else {
|
|
data = 0;
|
|
}
|
|
val = ST_LSM6DSX_SHIFT_VAL(data, batch_reg->mask);
|
|
return st_lsm6dsx_update_bits_locked(hw, batch_reg->addr,
|
|
batch_reg->mask, val);
|
|
} else {
|
|
data = hw->enable_mask ? ST_LSM6DSX_MAX_FIFO_ODR_VAL : 0;
|
|
return st_lsm6dsx_update_bits_locked(hw,
|
|
ST_LSM6DSX_REG_FIFO_MODE_ADDR,
|
|
ST_LSM6DSX_FIFO_ODR_MASK,
|
|
FIELD_PREP(ST_LSM6DSX_FIFO_ODR_MASK,
|
|
data));
|
|
}
|
|
}
|
|
|
|
int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
|
|
{
|
|
u16 fifo_watermark = ~0, cur_watermark, fifo_th_mask;
|
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
|
struct st_lsm6dsx_sensor *cur_sensor;
|
|
int i, err, data;
|
|
__le16 wdata;
|
|
|
|
if (!hw->sip)
|
|
return 0;
|
|
|
|
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
|
|
if (!hw->iio_devs[i])
|
|
continue;
|
|
|
|
cur_sensor = iio_priv(hw->iio_devs[i]);
|
|
|
|
if (!(hw->enable_mask & BIT(cur_sensor->id)))
|
|
continue;
|
|
|
|
cur_watermark = (cur_sensor == sensor) ? watermark
|
|
: cur_sensor->watermark;
|
|
|
|
fifo_watermark = min_t(u16, fifo_watermark, cur_watermark);
|
|
}
|
|
|
|
fifo_watermark = max_t(u16, fifo_watermark, hw->sip);
|
|
fifo_watermark = (fifo_watermark / hw->sip) * hw->sip;
|
|
fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl;
|
|
|
|
mutex_lock(&hw->page_lock);
|
|
err = regmap_read(hw->regmap, hw->settings->fifo_ops.fifo_th.addr + 1,
|
|
&data);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
fifo_th_mask = hw->settings->fifo_ops.fifo_th.mask;
|
|
fifo_watermark = ((data << 8) & ~fifo_th_mask) |
|
|
(fifo_watermark & fifo_th_mask);
|
|
|
|
wdata = cpu_to_le16(fifo_watermark);
|
|
err = regmap_bulk_write(hw->regmap,
|
|
hw->settings->fifo_ops.fifo_th.addr,
|
|
&wdata, sizeof(wdata));
|
|
out:
|
|
mutex_unlock(&hw->page_lock);
|
|
return err;
|
|
}
|
|
|
|
static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
|
|
{
|
|
struct st_lsm6dsx_sensor *sensor;
|
|
int i, err;
|
|
|
|
/* reset hw ts counter */
|
|
err = st_lsm6dsx_write_locked(hw, ST_LSM6DSX_REG_TS_RESET_ADDR,
|
|
ST_LSM6DSX_TS_RESET_VAL);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
|
|
if (!hw->iio_devs[i])
|
|
continue;
|
|
|
|
sensor = iio_priv(hw->iio_devs[i]);
|
|
/*
|
|
* store enable buffer timestamp as reference for
|
|
* hw timestamp
|
|
*/
|
|
sensor->ts_ref = iio_get_time_ns(hw->iio_devs[i]);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int st_lsm6dsx_resume_fifo(struct st_lsm6dsx_hw *hw)
|
|
{
|
|
int err;
|
|
|
|
/* reset hw ts counter */
|
|
err = st_lsm6dsx_reset_hw_ts(hw);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
|
|
}
|
|
|
|
/*
|
|
* Set max bulk read to ST_LSM6DSX_MAX_WORD_LEN/ST_LSM6DSX_MAX_TAGGED_WORD_LEN
|
|
* in order to avoid a kmalloc for each bus access
|
|
*/
|
|
static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
|
|
u8 *data, unsigned int data_len,
|
|
unsigned int max_word_len)
|
|
{
|
|
unsigned int word_len, read_len = 0;
|
|
int err;
|
|
|
|
while (read_len < data_len) {
|
|
word_len = min_t(unsigned int, data_len - read_len,
|
|
max_word_len);
|
|
err = st_lsm6dsx_read_locked(hw, addr, data + read_len,
|
|
word_len);
|
|
if (err < 0)
|
|
return err;
|
|
read_len += word_len;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define ST_LSM6DSX_IIO_BUFF_SIZE (ALIGN(ST_LSM6DSX_SAMPLE_SIZE, \
|
|
sizeof(s64)) + sizeof(s64))
|
|
/**
|
|
* st_lsm6dsx_read_fifo() - hw FIFO read routine
|
|
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
|
|
*
|
|
* Read samples from the hw FIFO and push them to IIO buffers.
|
|
*
|
|
* Return: Number of bytes read from the FIFO
|
|
*/
|
|
int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
|
|
{
|
|
struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
|
|
int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
|
|
u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
|
|
u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
|
|
bool reset_ts = false;
|
|
__le16 fifo_status;
|
|
s64 ts = 0;
|
|
|
|
err = st_lsm6dsx_read_locked(hw,
|
|
hw->settings->fifo_ops.fifo_diff.addr,
|
|
&fifo_status, sizeof(fifo_status));
|
|
if (err < 0) {
|
|
dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK))
|
|
return 0;
|
|
|
|
fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
|
|
ST_LSM6DSX_CHAN_SIZE;
|
|
fifo_len = (fifo_len / pattern_len) * pattern_len;
|
|
|
|
acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
|
|
gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
|
|
if (hw->iio_devs[ST_LSM6DSX_ID_EXT0])
|
|
ext_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_EXT0]);
|
|
|
|
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
|
|
err = st_lsm6dsx_read_block(hw, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
|
|
hw->buff, pattern_len,
|
|
ST_LSM6DSX_MAX_WORD_LEN);
|
|
if (err < 0) {
|
|
dev_err(hw->dev,
|
|
"failed to read pattern from fifo (err=%d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Data are written to the FIFO with a specific pattern
|
|
* depending on the configured ODRs. The first sequence of data
|
|
* stored in FIFO contains the data of all enabled sensors
|
|
* (e.g. Gx, Gy, Gz, Ax, Ay, Az, Ts), then data are repeated
|
|
* depending on the value of the decimation factor set for each
|
|
* sensor.
|
|
*
|
|
* Supposing the FIFO is storing data from gyroscope and
|
|
* accelerometer at different ODRs:
|
|
* - gyroscope ODR = 208Hz, accelerometer ODR = 104Hz
|
|
* Since the gyroscope ODR is twice the accelerometer one, the
|
|
* following pattern is repeated every 9 samples:
|
|
* - Gx, Gy, Gz, Ax, Ay, Az, Ts, Gx, Gy, Gz, Ts, Gx, ..
|
|
*/
|
|
ext_sip = ext_sensor ? ext_sensor->sip : 0;
|
|
gyro_sip = gyro_sensor->sip;
|
|
acc_sip = acc_sensor->sip;
|
|
ts_sip = hw->ts_sip;
|
|
offset = 0;
|
|
sip = 0;
|
|
|
|
while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
|
|
if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
|
|
memcpy(hw->scan[ST_LSM6DSX_ID_GYRO].channels,
|
|
&hw->buff[offset],
|
|
sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels));
|
|
offset += sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels);
|
|
}
|
|
if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
|
|
memcpy(hw->scan[ST_LSM6DSX_ID_ACC].channels,
|
|
&hw->buff[offset],
|
|
sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels));
|
|
offset += sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels);
|
|
}
|
|
if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
|
|
memcpy(hw->scan[ST_LSM6DSX_ID_EXT0].channels,
|
|
&hw->buff[offset],
|
|
sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels));
|
|
offset += sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels);
|
|
}
|
|
|
|
if (ts_sip-- > 0) {
|
|
u8 data[ST_LSM6DSX_SAMPLE_SIZE];
|
|
|
|
memcpy(data, &hw->buff[offset], sizeof(data));
|
|
/*
|
|
* hw timestamp is 3B long and it is stored
|
|
* in FIFO using 6B as 4th FIFO data set
|
|
* according to this schema:
|
|
* B0 = ts[15:8], B1 = ts[23:16], B3 = ts[7:0]
|
|
*/
|
|
ts = data[1] << 16 | data[0] << 8 | data[3];
|
|
/*
|
|
* check if hw timestamp engine is going to
|
|
* reset (the sensor generates an interrupt
|
|
* to signal the hw timestamp will reset in
|
|
* 1.638s)
|
|
*/
|
|
if (!reset_ts && ts >= 0xff0000)
|
|
reset_ts = true;
|
|
ts *= hw->ts_gain;
|
|
|
|
offset += ST_LSM6DSX_SAMPLE_SIZE;
|
|
}
|
|
|
|
if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
|
|
iio_push_to_buffers_with_timestamp(
|
|
hw->iio_devs[ST_LSM6DSX_ID_GYRO],
|
|
&hw->scan[ST_LSM6DSX_ID_GYRO],
|
|
gyro_sensor->ts_ref + ts);
|
|
gyro_sip--;
|
|
}
|
|
if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
|
|
iio_push_to_buffers_with_timestamp(
|
|
hw->iio_devs[ST_LSM6DSX_ID_ACC],
|
|
&hw->scan[ST_LSM6DSX_ID_ACC],
|
|
acc_sensor->ts_ref + ts);
|
|
acc_sip--;
|
|
}
|
|
if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
|
|
iio_push_to_buffers_with_timestamp(
|
|
hw->iio_devs[ST_LSM6DSX_ID_EXT0],
|
|
&hw->scan[ST_LSM6DSX_ID_EXT0],
|
|
ext_sensor->ts_ref + ts);
|
|
ext_sip--;
|
|
}
|
|
sip++;
|
|
}
|
|
}
|
|
|
|
if (unlikely(reset_ts)) {
|
|
err = st_lsm6dsx_reset_hw_ts(hw);
|
|
if (err < 0) {
|
|
dev_err(hw->dev, "failed to reset hw ts (err=%d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
}
|
|
return read_len;
|
|
}
|
|
|
|
#define ST_LSM6DSX_INVALID_SAMPLE 0x7ffd
|
|
static int
|
|
st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
|
|
u8 *data, s64 ts)
|
|
{
|
|
s16 val = le16_to_cpu(*(__le16 *)data);
|
|
struct st_lsm6dsx_sensor *sensor;
|
|
struct iio_dev *iio_dev;
|
|
|
|
/* invalid sample during bootstrap phase */
|
|
if (val >= ST_LSM6DSX_INVALID_SAMPLE)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* EXT_TAG are managed in FIFO fashion so ST_LSM6DSX_EXT0_TAG
|
|
* corresponds to the first enabled channel, ST_LSM6DSX_EXT1_TAG
|
|
* to the second one and ST_LSM6DSX_EXT2_TAG to the last enabled
|
|
* channel
|
|
*/
|
|
switch (tag) {
|
|
case ST_LSM6DSX_GYRO_TAG:
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_GYRO];
|
|
break;
|
|
case ST_LSM6DSX_ACC_TAG:
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC];
|
|
break;
|
|
case ST_LSM6DSX_EXT0_TAG:
|
|
if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0))
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT0];
|
|
else if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1))
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
|
|
else
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
|
|
break;
|
|
case ST_LSM6DSX_EXT1_TAG:
|
|
if ((hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0)) &&
|
|
(hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1)))
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
|
|
else
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
|
|
break;
|
|
case ST_LSM6DSX_EXT2_TAG:
|
|
iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
sensor = iio_priv(iio_dev);
|
|
iio_push_to_buffers_with_timestamp(iio_dev, data,
|
|
ts + sensor->ts_ref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* st_lsm6dsx_read_tagged_fifo() - tagged hw FIFO read routine
|
|
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
|
|
*
|
|
* Read samples from the hw FIFO and push them to IIO buffers.
|
|
*
|
|
* Return: Number of bytes read from the FIFO
|
|
*/
|
|
int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
|
|
{
|
|
u16 pattern_len = hw->sip * ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
|
|
u16 fifo_len, fifo_diff_mask;
|
|
/*
|
|
* Alignment needed as this can ultimately be passed to a
|
|
* call to iio_push_to_buffers_with_timestamp() which
|
|
* must be passed a buffer that is aligned to 8 bytes so
|
|
* as to allow insertion of a naturally aligned timestamp.
|
|
*/
|
|
u8 iio_buff[ST_LSM6DSX_IIO_BUFF_SIZE] __aligned(8);
|
|
u8 tag;
|
|
bool reset_ts = false;
|
|
int i, err, read_len;
|
|
__le16 fifo_status;
|
|
s64 ts = 0;
|
|
|
|
err = st_lsm6dsx_read_locked(hw,
|
|
hw->settings->fifo_ops.fifo_diff.addr,
|
|
&fifo_status, sizeof(fifo_status));
|
|
if (err < 0) {
|
|
dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
|
|
fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
|
|
ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
|
|
if (!fifo_len)
|
|
return 0;
|
|
|
|
for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
|
|
err = st_lsm6dsx_read_block(hw,
|
|
ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR,
|
|
hw->buff, pattern_len,
|
|
ST_LSM6DSX_MAX_TAGGED_WORD_LEN);
|
|
if (err < 0) {
|
|
dev_err(hw->dev,
|
|
"failed to read pattern from fifo (err=%d)\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
for (i = 0; i < pattern_len;
|
|
i += ST_LSM6DSX_TAGGED_SAMPLE_SIZE) {
|
|
memcpy(iio_buff, &hw->buff[i + ST_LSM6DSX_TAG_SIZE],
|
|
ST_LSM6DSX_SAMPLE_SIZE);
|
|
|
|
tag = hw->buff[i] >> 3;
|
|
if (tag == ST_LSM6DSX_TS_TAG) {
|
|
/*
|
|
* hw timestamp is 4B long and it is stored
|
|
* in FIFO according to this schema:
|
|
* B0 = ts[7:0], B1 = ts[15:8], B2 = ts[23:16],
|
|
* B3 = ts[31:24]
|
|
*/
|
|
ts = le32_to_cpu(*((__le32 *)iio_buff));
|
|
/*
|
|
* check if hw timestamp engine is going to
|
|
* reset (the sensor generates an interrupt
|
|
* to signal the hw timestamp will reset in
|
|
* 1.638s)
|
|
*/
|
|
if (!reset_ts && ts >= 0xffff0000)
|
|
reset_ts = true;
|
|
ts *= hw->ts_gain;
|
|
} else {
|
|
st_lsm6dsx_push_tagged_data(hw, tag, iio_buff,
|
|
ts);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (unlikely(reset_ts)) {
|
|
err = st_lsm6dsx_reset_hw_ts(hw);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
return read_len;
|
|
}
|
|
|
|
int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
|
|
{
|
|
int err;
|
|
|
|
if (!hw->settings->fifo_ops.read_fifo)
|
|
return -ENOTSUPP;
|
|
|
|
mutex_lock(&hw->fifo_lock);
|
|
|
|
hw->settings->fifo_ops.read_fifo(hw);
|
|
err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS);
|
|
|
|
mutex_unlock(&hw->fifo_lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
|
|
{
|
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
|
u8 fifo_mask;
|
|
int err;
|
|
|
|
mutex_lock(&hw->conf_lock);
|
|
|
|
if (enable)
|
|
fifo_mask = hw->fifo_mask | BIT(sensor->id);
|
|
else
|
|
fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
|
|
|
|
if (hw->fifo_mask) {
|
|
err = st_lsm6dsx_flush_fifo(hw);
|
|
if (err < 0)
|
|
goto out;
|
|
}
|
|
|
|
if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
|
|
sensor->id == ST_LSM6DSX_ID_EXT1 ||
|
|
sensor->id == ST_LSM6DSX_ID_EXT2) {
|
|
err = st_lsm6dsx_shub_set_enable(sensor, enable);
|
|
if (err < 0)
|
|
goto out;
|
|
} else {
|
|
err = st_lsm6dsx_sensor_set_enable(sensor, enable);
|
|
if (err < 0)
|
|
goto out;
|
|
}
|
|
|
|
err = st_lsm6dsx_set_fifo_odr(sensor, enable);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
err = st_lsm6dsx_update_decimators(hw);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
err = st_lsm6dsx_update_watermark(sensor, sensor->watermark);
|
|
if (err < 0)
|
|
goto out;
|
|
|
|
if (fifo_mask) {
|
|
err = st_lsm6dsx_resume_fifo(hw);
|
|
if (err < 0)
|
|
goto out;
|
|
}
|
|
|
|
hw->fifo_mask = fifo_mask;
|
|
|
|
out:
|
|
mutex_unlock(&hw->conf_lock);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
|
|
{
|
|
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
|
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
|
|
|
if (!hw->settings->fifo_ops.update_fifo)
|
|
return -ENOTSUPP;
|
|
|
|
return hw->settings->fifo_ops.update_fifo(sensor, true);
|
|
}
|
|
|
|
static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev)
|
|
{
|
|
struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
|
|
struct st_lsm6dsx_hw *hw = sensor->hw;
|
|
|
|
if (!hw->settings->fifo_ops.update_fifo)
|
|
return -ENOTSUPP;
|
|
|
|
return hw->settings->fifo_ops.update_fifo(sensor, false);
|
|
}
|
|
|
|
static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
|
|
.preenable = st_lsm6dsx_buffer_preenable,
|
|
.postdisable = st_lsm6dsx_buffer_postdisable,
|
|
};
|
|
|
|
int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
|
|
{
|
|
struct iio_buffer *buffer;
|
|
int i;
|
|
|
|
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
|
|
if (!hw->iio_devs[i])
|
|
continue;
|
|
|
|
buffer = devm_iio_kfifo_allocate(hw->dev);
|
|
if (!buffer)
|
|
return -ENOMEM;
|
|
|
|
iio_device_attach_buffer(hw->iio_devs[i], buffer);
|
|
hw->iio_devs[i]->modes |= INDIO_BUFFER_SOFTWARE;
|
|
hw->iio_devs[i]->setup_ops = &st_lsm6dsx_buffer_ops;
|
|
}
|
|
|
|
return 0;
|
|
}
|