mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 06:24:53 +08:00
b079922ba2
This is a preparation patch for the removal of the DSA switch methods ->port_bridge_tx_fwd_offload() and ->port_bridge_tx_fwd_unoffload(). The plan is for the switch to report whether it offloads TX forwarding directly as a response to the ->port_bridge_join() method. This change deals with the noisy portion of converting all existing function prototypes to take this new boolean pointer argument. The bool is placed in the cross-chip notifier structure for bridge join, and a reference to it is provided to drivers. In the next change, DSA will then actually look at this value instead of calling ->port_bridge_tx_fwd_offload(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2617 lines
65 KiB
C
2617 lines
65 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
|
|
* Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved.
|
|
* Copyright (c) 2016 John Crispin <john@phrozen.org>
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/regmap.h>
|
|
#include <net/dsa.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/phylink.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include "qca8k.h"
|
|
|
|
#define MIB_DESC(_s, _o, _n) \
|
|
{ \
|
|
.size = (_s), \
|
|
.offset = (_o), \
|
|
.name = (_n), \
|
|
}
|
|
|
|
static const struct qca8k_mib_desc ar8327_mib[] = {
|
|
MIB_DESC(1, 0x00, "RxBroad"),
|
|
MIB_DESC(1, 0x04, "RxPause"),
|
|
MIB_DESC(1, 0x08, "RxMulti"),
|
|
MIB_DESC(1, 0x0c, "RxFcsErr"),
|
|
MIB_DESC(1, 0x10, "RxAlignErr"),
|
|
MIB_DESC(1, 0x14, "RxRunt"),
|
|
MIB_DESC(1, 0x18, "RxFragment"),
|
|
MIB_DESC(1, 0x1c, "Rx64Byte"),
|
|
MIB_DESC(1, 0x20, "Rx128Byte"),
|
|
MIB_DESC(1, 0x24, "Rx256Byte"),
|
|
MIB_DESC(1, 0x28, "Rx512Byte"),
|
|
MIB_DESC(1, 0x2c, "Rx1024Byte"),
|
|
MIB_DESC(1, 0x30, "Rx1518Byte"),
|
|
MIB_DESC(1, 0x34, "RxMaxByte"),
|
|
MIB_DESC(1, 0x38, "RxTooLong"),
|
|
MIB_DESC(2, 0x3c, "RxGoodByte"),
|
|
MIB_DESC(2, 0x44, "RxBadByte"),
|
|
MIB_DESC(1, 0x4c, "RxOverFlow"),
|
|
MIB_DESC(1, 0x50, "Filtered"),
|
|
MIB_DESC(1, 0x54, "TxBroad"),
|
|
MIB_DESC(1, 0x58, "TxPause"),
|
|
MIB_DESC(1, 0x5c, "TxMulti"),
|
|
MIB_DESC(1, 0x60, "TxUnderRun"),
|
|
MIB_DESC(1, 0x64, "Tx64Byte"),
|
|
MIB_DESC(1, 0x68, "Tx128Byte"),
|
|
MIB_DESC(1, 0x6c, "Tx256Byte"),
|
|
MIB_DESC(1, 0x70, "Tx512Byte"),
|
|
MIB_DESC(1, 0x74, "Tx1024Byte"),
|
|
MIB_DESC(1, 0x78, "Tx1518Byte"),
|
|
MIB_DESC(1, 0x7c, "TxMaxByte"),
|
|
MIB_DESC(1, 0x80, "TxOverSize"),
|
|
MIB_DESC(2, 0x84, "TxByte"),
|
|
MIB_DESC(1, 0x8c, "TxCollision"),
|
|
MIB_DESC(1, 0x90, "TxAbortCol"),
|
|
MIB_DESC(1, 0x94, "TxMultiCol"),
|
|
MIB_DESC(1, 0x98, "TxSingleCol"),
|
|
MIB_DESC(1, 0x9c, "TxExcDefer"),
|
|
MIB_DESC(1, 0xa0, "TxDefer"),
|
|
MIB_DESC(1, 0xa4, "TxLateCol"),
|
|
MIB_DESC(1, 0xa8, "RXUnicast"),
|
|
MIB_DESC(1, 0xac, "TXUnicast"),
|
|
};
|
|
|
|
/* The 32bit switch registers are accessed indirectly. To achieve this we need
|
|
* to set the page of the register. Track the last page that was set to reduce
|
|
* mdio writes
|
|
*/
|
|
static u16 qca8k_current_page = 0xffff;
|
|
|
|
static void
|
|
qca8k_split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page)
|
|
{
|
|
regaddr >>= 1;
|
|
*r1 = regaddr & 0x1e;
|
|
|
|
regaddr >>= 5;
|
|
*r2 = regaddr & 0x7;
|
|
|
|
regaddr >>= 3;
|
|
*page = regaddr & 0x3ff;
|
|
}
|
|
|
|
static int
|
|
qca8k_mii_read32(struct mii_bus *bus, int phy_id, u32 regnum, u32 *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = bus->read(bus, phy_id, regnum);
|
|
if (ret >= 0) {
|
|
*val = ret;
|
|
ret = bus->read(bus, phy_id, regnum + 1);
|
|
*val |= ret << 16;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
dev_err_ratelimited(&bus->dev,
|
|
"failed to read qca8k 32bit register\n");
|
|
*val = 0;
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_mii_write32(struct mii_bus *bus, int phy_id, u32 regnum, u32 val)
|
|
{
|
|
u16 lo, hi;
|
|
int ret;
|
|
|
|
lo = val & 0xffff;
|
|
hi = (u16)(val >> 16);
|
|
|
|
ret = bus->write(bus, phy_id, regnum, lo);
|
|
if (ret >= 0)
|
|
ret = bus->write(bus, phy_id, regnum + 1, hi);
|
|
if (ret < 0)
|
|
dev_err_ratelimited(&bus->dev,
|
|
"failed to write qca8k 32bit register\n");
|
|
}
|
|
|
|
static int
|
|
qca8k_set_page(struct mii_bus *bus, u16 page)
|
|
{
|
|
int ret;
|
|
|
|
if (page == qca8k_current_page)
|
|
return 0;
|
|
|
|
ret = bus->write(bus, 0x18, 0, page);
|
|
if (ret < 0) {
|
|
dev_err_ratelimited(&bus->dev,
|
|
"failed to set qca8k page\n");
|
|
return ret;
|
|
}
|
|
|
|
qca8k_current_page = page;
|
|
usleep_range(1000, 2000);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val)
|
|
{
|
|
return regmap_read(priv->regmap, reg, val);
|
|
}
|
|
|
|
static int
|
|
qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val)
|
|
{
|
|
return regmap_write(priv->regmap, reg, val);
|
|
}
|
|
|
|
static int
|
|
qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val)
|
|
{
|
|
return regmap_update_bits(priv->regmap, reg, mask, write_val);
|
|
}
|
|
|
|
static int
|
|
qca8k_regmap_read(void *ctx, uint32_t reg, uint32_t *val)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
|
|
struct mii_bus *bus = priv->bus;
|
|
u16 r1, r2, page;
|
|
int ret;
|
|
|
|
qca8k_split_addr(reg, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
ret = qca8k_set_page(bus, page);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = qca8k_mii_read32(bus, 0x10 | r2, r1, val);
|
|
|
|
exit:
|
|
mutex_unlock(&bus->mdio_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_regmap_write(void *ctx, uint32_t reg, uint32_t val)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
|
|
struct mii_bus *bus = priv->bus;
|
|
u16 r1, r2, page;
|
|
int ret;
|
|
|
|
qca8k_split_addr(reg, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
ret = qca8k_set_page(bus, page);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
|
|
|
|
exit:
|
|
mutex_unlock(&bus->mdio_lock);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_regmap_update_bits(void *ctx, uint32_t reg, uint32_t mask, uint32_t write_val)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ctx;
|
|
struct mii_bus *bus = priv->bus;
|
|
u16 r1, r2, page;
|
|
u32 val;
|
|
int ret;
|
|
|
|
qca8k_split_addr(reg, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
ret = qca8k_set_page(bus, page);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
val &= ~mask;
|
|
val |= write_val;
|
|
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
|
|
|
|
exit:
|
|
mutex_unlock(&bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct regmap_range qca8k_readable_ranges[] = {
|
|
regmap_reg_range(0x0000, 0x00e4), /* Global control */
|
|
regmap_reg_range(0x0100, 0x0168), /* EEE control */
|
|
regmap_reg_range(0x0200, 0x0270), /* Parser control */
|
|
regmap_reg_range(0x0400, 0x0454), /* ACL */
|
|
regmap_reg_range(0x0600, 0x0718), /* Lookup */
|
|
regmap_reg_range(0x0800, 0x0b70), /* QM */
|
|
regmap_reg_range(0x0c00, 0x0c80), /* PKT */
|
|
regmap_reg_range(0x0e00, 0x0e98), /* L3 */
|
|
regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */
|
|
regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */
|
|
regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */
|
|
regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */
|
|
regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */
|
|
regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */
|
|
regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */
|
|
|
|
};
|
|
|
|
static const struct regmap_access_table qca8k_readable_table = {
|
|
.yes_ranges = qca8k_readable_ranges,
|
|
.n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges),
|
|
};
|
|
|
|
static struct regmap_config qca8k_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = 0x16ac, /* end MIB - Port6 range */
|
|
.reg_read = qca8k_regmap_read,
|
|
.reg_write = qca8k_regmap_write,
|
|
.reg_update_bits = qca8k_regmap_update_bits,
|
|
.rd_table = &qca8k_readable_table,
|
|
.disable_locking = true, /* Locking is handled by qca8k read/write */
|
|
.cache_type = REGCACHE_NONE, /* Explicitly disable CACHE */
|
|
};
|
|
|
|
static int
|
|
qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask)
|
|
{
|
|
u32 val;
|
|
|
|
return regmap_read_poll_timeout(priv->regmap, reg, val, !(val & mask), 0,
|
|
QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC);
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb)
|
|
{
|
|
u32 reg[4], val;
|
|
int i, ret;
|
|
|
|
/* load the ARL table into an array */
|
|
for (i = 0; i < 4; i++) {
|
|
ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
reg[i] = val;
|
|
}
|
|
|
|
/* vid - 83:72 */
|
|
fdb->vid = FIELD_GET(QCA8K_ATU_VID_MASK, reg[2]);
|
|
/* aging - 67:64 */
|
|
fdb->aging = FIELD_GET(QCA8K_ATU_STATUS_MASK, reg[2]);
|
|
/* portmask - 54:48 */
|
|
fdb->port_mask = FIELD_GET(QCA8K_ATU_PORT_MASK, reg[1]);
|
|
/* mac - 47:0 */
|
|
fdb->mac[0] = FIELD_GET(QCA8K_ATU_ADDR0_MASK, reg[1]);
|
|
fdb->mac[1] = FIELD_GET(QCA8K_ATU_ADDR1_MASK, reg[1]);
|
|
fdb->mac[2] = FIELD_GET(QCA8K_ATU_ADDR2_MASK, reg[0]);
|
|
fdb->mac[3] = FIELD_GET(QCA8K_ATU_ADDR3_MASK, reg[0]);
|
|
fdb->mac[4] = FIELD_GET(QCA8K_ATU_ADDR4_MASK, reg[0]);
|
|
fdb->mac[5] = FIELD_GET(QCA8K_ATU_ADDR5_MASK, reg[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac,
|
|
u8 aging)
|
|
{
|
|
u32 reg[3] = { 0 };
|
|
int i;
|
|
|
|
/* vid - 83:72 */
|
|
reg[2] = FIELD_PREP(QCA8K_ATU_VID_MASK, vid);
|
|
/* aging - 67:64 */
|
|
reg[2] |= FIELD_PREP(QCA8K_ATU_STATUS_MASK, aging);
|
|
/* portmask - 54:48 */
|
|
reg[1] = FIELD_PREP(QCA8K_ATU_PORT_MASK, port_mask);
|
|
/* mac - 47:0 */
|
|
reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR0_MASK, mac[0]);
|
|
reg[1] |= FIELD_PREP(QCA8K_ATU_ADDR1_MASK, mac[1]);
|
|
reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR2_MASK, mac[2]);
|
|
reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR3_MASK, mac[3]);
|
|
reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR4_MASK, mac[4]);
|
|
reg[0] |= FIELD_PREP(QCA8K_ATU_ADDR5_MASK, mac[5]);
|
|
|
|
/* load the array into the ARL table */
|
|
for (i = 0; i < 3; i++)
|
|
qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]);
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port)
|
|
{
|
|
u32 reg;
|
|
int ret;
|
|
|
|
/* Set the command and FDB index */
|
|
reg = QCA8K_ATU_FUNC_BUSY;
|
|
reg |= cmd;
|
|
if (port >= 0) {
|
|
reg |= QCA8K_ATU_FUNC_PORT_EN;
|
|
reg |= FIELD_PREP(QCA8K_ATU_FUNC_PORT_MASK, port);
|
|
}
|
|
|
|
/* Write the function register triggering the table access */
|
|
ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* wait for completion */
|
|
ret = qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check for table full violation when adding an entry */
|
|
if (cmd == QCA8K_FDB_LOAD) {
|
|
ret = qca8k_read(priv, QCA8K_REG_ATU_FUNC, ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (reg & QCA8K_ATU_FUNC_FULL)
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb, int port)
|
|
{
|
|
int ret;
|
|
|
|
qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return qca8k_fdb_read(priv, fdb);
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac, u16 port_mask,
|
|
u16 vid, u8 aging)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_fdb_write(priv, vid, port_mask, mac, aging);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, u16 vid)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_fdb_write(priv, vid, port_mask, mac, 0);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
qca8k_fdb_flush(struct qca8k_priv *priv)
|
|
{
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_search_and_insert(struct qca8k_priv *priv, u8 port_mask,
|
|
const u8 *mac, u16 vid)
|
|
{
|
|
struct qca8k_fdb fdb = { 0 };
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
qca8k_fdb_write(priv, vid, 0, mac, 0);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
ret = qca8k_fdb_read(priv, &fdb);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
/* Rule exist. Delete first */
|
|
if (!fdb.aging) {
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
|
|
/* Add port to fdb portmask */
|
|
fdb.port_mask |= port_mask;
|
|
|
|
qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
|
|
|
|
exit:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_fdb_search_and_del(struct qca8k_priv *priv, u8 port_mask,
|
|
const u8 *mac, u16 vid)
|
|
{
|
|
struct qca8k_fdb fdb = { 0 };
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
qca8k_fdb_write(priv, vid, 0, mac, 0);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_SEARCH, -1);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
/* Rule doesn't exist. Why delete? */
|
|
if (!fdb.aging) {
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
/* Only port in the rule is this port. Don't re insert */
|
|
if (fdb.port_mask == port_mask)
|
|
goto exit;
|
|
|
|
/* Remove port from port mask */
|
|
fdb.port_mask &= ~port_mask;
|
|
|
|
qca8k_fdb_write(priv, vid, fdb.port_mask, mac, fdb.aging);
|
|
ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1);
|
|
|
|
exit:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid)
|
|
{
|
|
u32 reg;
|
|
int ret;
|
|
|
|
/* Set the command and VLAN index */
|
|
reg = QCA8K_VTU_FUNC1_BUSY;
|
|
reg |= cmd;
|
|
reg |= FIELD_PREP(QCA8K_VTU_FUNC1_VID_MASK, vid);
|
|
|
|
/* Write the function register triggering the table access */
|
|
ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* wait for completion */
|
|
ret = qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Check for table full violation when adding an entry */
|
|
if (cmd == QCA8K_VLAN_LOAD) {
|
|
ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC1, ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (reg & QCA8K_VTU_FUNC1_FULL)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid, bool untagged)
|
|
{
|
|
u32 reg;
|
|
int ret;
|
|
|
|
/*
|
|
We do the right thing with VLAN 0 and treat it as untagged while
|
|
preserving the tag on egress.
|
|
*/
|
|
if (vid == 0)
|
|
return 0;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®);
|
|
if (ret < 0)
|
|
goto out;
|
|
reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN;
|
|
reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port);
|
|
if (untagged)
|
|
reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_UNTAG(port);
|
|
else
|
|
reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_TAG(port);
|
|
|
|
ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
|
|
if (ret)
|
|
goto out;
|
|
ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
|
|
|
|
out:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid)
|
|
{
|
|
u32 reg, mask;
|
|
int ret, i;
|
|
bool del;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®);
|
|
if (ret < 0)
|
|
goto out;
|
|
reg &= ~QCA8K_VTU_FUNC0_EG_MODE_PORT_MASK(port);
|
|
reg |= QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(port);
|
|
|
|
/* Check if we're the last member to be removed */
|
|
del = true;
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
mask = QCA8K_VTU_FUNC0_EG_MODE_PORT_NOT(i);
|
|
|
|
if ((reg & mask) != mask) {
|
|
del = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (del) {
|
|
ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid);
|
|
} else {
|
|
ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg);
|
|
if (ret)
|
|
goto out;
|
|
ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid);
|
|
}
|
|
|
|
out:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_mib_init(struct qca8k_priv *priv)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = regmap_set_bits(priv->regmap, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB);
|
|
|
|
exit:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable)
|
|
{
|
|
u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
|
|
|
|
/* Port 0 and 6 have no internal PHY */
|
|
if (port > 0 && port < 6)
|
|
mask |= QCA8K_PORT_STATUS_LINK_AUTO;
|
|
|
|
if (enable)
|
|
regmap_set_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask);
|
|
else
|
|
regmap_clear_bits(priv->regmap, QCA8K_REG_PORT_STATUS(port), mask);
|
|
}
|
|
|
|
static u32
|
|
qca8k_port_to_phy(int port)
|
|
{
|
|
/* From Andrew Lunn:
|
|
* Port 0 has no internal phy.
|
|
* Port 1 has an internal PHY at MDIO address 0.
|
|
* Port 2 has an internal PHY at MDIO address 1.
|
|
* ...
|
|
* Port 5 has an internal PHY at MDIO address 4.
|
|
* Port 6 has no internal PHY.
|
|
*/
|
|
|
|
return port - 1;
|
|
}
|
|
|
|
static int
|
|
qca8k_mdio_busy_wait(struct mii_bus *bus, u32 reg, u32 mask)
|
|
{
|
|
u16 r1, r2, page;
|
|
u32 val;
|
|
int ret, ret1;
|
|
|
|
qca8k_split_addr(reg, &r1, &r2, &page);
|
|
|
|
ret = read_poll_timeout(qca8k_mii_read32, ret1, !(val & mask), 0,
|
|
QCA8K_BUSY_WAIT_TIMEOUT * USEC_PER_MSEC, false,
|
|
bus, 0x10 | r2, r1, &val);
|
|
|
|
/* Check if qca8k_read has failed for a different reason
|
|
* before returnting -ETIMEDOUT
|
|
*/
|
|
if (ret < 0 && ret1 < 0)
|
|
return ret1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_mdio_write(struct mii_bus *bus, int phy, int regnum, u16 data)
|
|
{
|
|
u16 r1, r2, page;
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
|
|
return -EINVAL;
|
|
|
|
val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
|
|
QCA8K_MDIO_MASTER_WRITE | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
|
|
QCA8K_MDIO_MASTER_REG_ADDR(regnum) |
|
|
QCA8K_MDIO_MASTER_DATA(data);
|
|
|
|
qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
ret = qca8k_set_page(bus, page);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
|
|
|
|
ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
|
|
QCA8K_MDIO_MASTER_BUSY);
|
|
|
|
exit:
|
|
/* even if the busy_wait timeouts try to clear the MASTER_EN */
|
|
qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
|
|
|
|
mutex_unlock(&bus->mdio_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_mdio_read(struct mii_bus *bus, int phy, int regnum)
|
|
{
|
|
u16 r1, r2, page;
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (regnum >= QCA8K_MDIO_MASTER_MAX_REG)
|
|
return -EINVAL;
|
|
|
|
val = QCA8K_MDIO_MASTER_BUSY | QCA8K_MDIO_MASTER_EN |
|
|
QCA8K_MDIO_MASTER_READ | QCA8K_MDIO_MASTER_PHY_ADDR(phy) |
|
|
QCA8K_MDIO_MASTER_REG_ADDR(regnum);
|
|
|
|
qca8k_split_addr(QCA8K_MDIO_MASTER_CTRL, &r1, &r2, &page);
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
ret = qca8k_set_page(bus, page);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
qca8k_mii_write32(bus, 0x10 | r2, r1, val);
|
|
|
|
ret = qca8k_mdio_busy_wait(bus, QCA8K_MDIO_MASTER_CTRL,
|
|
QCA8K_MDIO_MASTER_BUSY);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = qca8k_mii_read32(bus, 0x10 | r2, r1, &val);
|
|
|
|
exit:
|
|
/* even if the busy_wait timeouts try to clear the MASTER_EN */
|
|
qca8k_mii_write32(bus, 0x10 | r2, r1, 0);
|
|
|
|
mutex_unlock(&bus->mdio_lock);
|
|
|
|
if (ret >= 0)
|
|
ret = val & QCA8K_MDIO_MASTER_DATA_MASK;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_internal_mdio_write(struct mii_bus *slave_bus, int phy, int regnum, u16 data)
|
|
{
|
|
struct qca8k_priv *priv = slave_bus->priv;
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
return qca8k_mdio_write(bus, phy, regnum, data);
|
|
}
|
|
|
|
static int
|
|
qca8k_internal_mdio_read(struct mii_bus *slave_bus, int phy, int regnum)
|
|
{
|
|
struct qca8k_priv *priv = slave_bus->priv;
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
return qca8k_mdio_read(bus, phy, regnum);
|
|
}
|
|
|
|
static int
|
|
qca8k_phy_write(struct dsa_switch *ds, int port, int regnum, u16 data)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
|
|
/* Check if the legacy mapping should be used and the
|
|
* port is not correctly mapped to the right PHY in the
|
|
* devicetree
|
|
*/
|
|
if (priv->legacy_phy_port_mapping)
|
|
port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
|
|
|
|
return qca8k_mdio_write(priv->bus, port, regnum, data);
|
|
}
|
|
|
|
static int
|
|
qca8k_phy_read(struct dsa_switch *ds, int port, int regnum)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int ret;
|
|
|
|
/* Check if the legacy mapping should be used and the
|
|
* port is not correctly mapped to the right PHY in the
|
|
* devicetree
|
|
*/
|
|
if (priv->legacy_phy_port_mapping)
|
|
port = qca8k_port_to_phy(port) % PHY_MAX_ADDR;
|
|
|
|
ret = qca8k_mdio_read(priv->bus, port, regnum);
|
|
|
|
if (ret < 0)
|
|
return 0xffff;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_mdio_register(struct qca8k_priv *priv, struct device_node *mdio)
|
|
{
|
|
struct dsa_switch *ds = priv->ds;
|
|
struct mii_bus *bus;
|
|
|
|
bus = devm_mdiobus_alloc(ds->dev);
|
|
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
|
|
bus->priv = (void *)priv;
|
|
bus->name = "qca8k slave mii";
|
|
bus->read = qca8k_internal_mdio_read;
|
|
bus->write = qca8k_internal_mdio_write;
|
|
snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d",
|
|
ds->index);
|
|
|
|
bus->parent = ds->dev;
|
|
bus->phy_mask = ~ds->phys_mii_mask;
|
|
|
|
ds->slave_mii_bus = bus;
|
|
|
|
return devm_of_mdiobus_register(priv->dev, bus, mdio);
|
|
}
|
|
|
|
static int
|
|
qca8k_setup_mdio_bus(struct qca8k_priv *priv)
|
|
{
|
|
u32 internal_mdio_mask = 0, external_mdio_mask = 0, reg;
|
|
struct device_node *ports, *port, *mdio;
|
|
phy_interface_t mode;
|
|
int err;
|
|
|
|
ports = of_get_child_by_name(priv->dev->of_node, "ports");
|
|
if (!ports)
|
|
ports = of_get_child_by_name(priv->dev->of_node, "ethernet-ports");
|
|
|
|
if (!ports)
|
|
return -EINVAL;
|
|
|
|
for_each_available_child_of_node(ports, port) {
|
|
err = of_property_read_u32(port, "reg", ®);
|
|
if (err) {
|
|
of_node_put(port);
|
|
of_node_put(ports);
|
|
return err;
|
|
}
|
|
|
|
if (!dsa_is_user_port(priv->ds, reg))
|
|
continue;
|
|
|
|
of_get_phy_mode(port, &mode);
|
|
|
|
if (of_property_read_bool(port, "phy-handle") &&
|
|
mode != PHY_INTERFACE_MODE_INTERNAL)
|
|
external_mdio_mask |= BIT(reg);
|
|
else
|
|
internal_mdio_mask |= BIT(reg);
|
|
}
|
|
|
|
of_node_put(ports);
|
|
if (!external_mdio_mask && !internal_mdio_mask) {
|
|
dev_err(priv->dev, "no PHYs are defined.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The QCA8K_MDIO_MASTER_EN Bit, which grants access to PHYs through
|
|
* the MDIO_MASTER register also _disconnects_ the external MDC
|
|
* passthrough to the internal PHYs. It's not possible to use both
|
|
* configurations at the same time!
|
|
*
|
|
* Because this came up during the review process:
|
|
* If the external mdio-bus driver is capable magically disabling
|
|
* the QCA8K_MDIO_MASTER_EN and mutex/spin-locking out the qca8k's
|
|
* accessors for the time being, it would be possible to pull this
|
|
* off.
|
|
*/
|
|
if (!!external_mdio_mask && !!internal_mdio_mask) {
|
|
dev_err(priv->dev, "either internal or external mdio bus configuration is supported.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (external_mdio_mask) {
|
|
/* Make sure to disable the internal mdio bus in cases
|
|
* a dt-overlay and driver reload changed the configuration
|
|
*/
|
|
|
|
return regmap_clear_bits(priv->regmap, QCA8K_MDIO_MASTER_CTRL,
|
|
QCA8K_MDIO_MASTER_EN);
|
|
}
|
|
|
|
/* Check if the devicetree declare the port:phy mapping */
|
|
mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
|
|
if (of_device_is_available(mdio)) {
|
|
err = qca8k_mdio_register(priv, mdio);
|
|
if (err)
|
|
of_node_put(mdio);
|
|
|
|
return err;
|
|
}
|
|
|
|
/* If a mapping can't be found the legacy mapping is used,
|
|
* using the qca8k_port_to_phy function
|
|
*/
|
|
priv->legacy_phy_port_mapping = true;
|
|
priv->ops.phy_read = qca8k_phy_read;
|
|
priv->ops.phy_write = qca8k_phy_write;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv)
|
|
{
|
|
u32 mask = 0;
|
|
int ret = 0;
|
|
|
|
/* SoC specific settings for ipq8064.
|
|
* If more device require this consider adding
|
|
* a dedicated binding.
|
|
*/
|
|
if (of_machine_is_compatible("qcom,ipq8064"))
|
|
mask |= QCA8K_MAC_PWR_RGMII0_1_8V;
|
|
|
|
/* SoC specific settings for ipq8065 */
|
|
if (of_machine_is_compatible("qcom,ipq8065"))
|
|
mask |= QCA8K_MAC_PWR_RGMII1_1_8V;
|
|
|
|
if (mask) {
|
|
ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL,
|
|
QCA8K_MAC_PWR_RGMII0_1_8V |
|
|
QCA8K_MAC_PWR_RGMII1_1_8V,
|
|
mask);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int qca8k_find_cpu_port(struct dsa_switch *ds)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
|
|
/* Find the connected cpu port. Valid port are 0 or 6 */
|
|
if (dsa_is_cpu_port(ds, 0))
|
|
return 0;
|
|
|
|
dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6");
|
|
|
|
if (dsa_is_cpu_port(ds, 6))
|
|
return 6;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int
|
|
qca8k_setup_of_pws_reg(struct qca8k_priv *priv)
|
|
{
|
|
struct device_node *node = priv->dev->of_node;
|
|
const struct qca8k_match_data *data;
|
|
u32 val = 0;
|
|
int ret;
|
|
|
|
/* QCA8327 require to set to the correct mode.
|
|
* His bigger brother QCA8328 have the 172 pin layout.
|
|
* Should be applied by default but we set this just to make sure.
|
|
*/
|
|
if (priv->switch_id == QCA8K_ID_QCA8327) {
|
|
data = of_device_get_match_data(priv->dev);
|
|
|
|
/* Set the correct package of 148 pin for QCA8327 */
|
|
if (data->reduced_package)
|
|
val |= QCA8327_PWS_PACKAGE148_EN;
|
|
|
|
ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN,
|
|
val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
if (of_property_read_bool(node, "qca,ignore-power-on-sel"))
|
|
val |= QCA8K_PWS_POWER_ON_SEL;
|
|
|
|
if (of_property_read_bool(node, "qca,led-open-drain")) {
|
|
if (!(val & QCA8K_PWS_POWER_ON_SEL)) {
|
|
dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set.");
|
|
return -EINVAL;
|
|
}
|
|
|
|
val |= QCA8K_PWS_LED_OPEN_EN_CSR;
|
|
}
|
|
|
|
return qca8k_rmw(priv, QCA8K_REG_PWS,
|
|
QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL,
|
|
val);
|
|
}
|
|
|
|
static int
|
|
qca8k_parse_port_config(struct qca8k_priv *priv)
|
|
{
|
|
int port, cpu_port_index = -1, ret;
|
|
struct device_node *port_dn;
|
|
phy_interface_t mode;
|
|
struct dsa_port *dp;
|
|
u32 delay;
|
|
|
|
/* We have 2 CPU port. Check them */
|
|
for (port = 0; port < QCA8K_NUM_PORTS; port++) {
|
|
/* Skip every other port */
|
|
if (port != 0 && port != 6)
|
|
continue;
|
|
|
|
dp = dsa_to_port(priv->ds, port);
|
|
port_dn = dp->dn;
|
|
cpu_port_index++;
|
|
|
|
if (!of_device_is_available(port_dn))
|
|
continue;
|
|
|
|
ret = of_get_phy_mode(port_dn, &mode);
|
|
if (ret)
|
|
continue;
|
|
|
|
switch (mode) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
delay = 0;
|
|
|
|
if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay))
|
|
/* Switch regs accept value in ns, convert ps to ns */
|
|
delay = delay / 1000;
|
|
else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
mode == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
delay = 1;
|
|
|
|
if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK, delay)) {
|
|
dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value");
|
|
delay = 3;
|
|
}
|
|
|
|
priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay;
|
|
|
|
delay = 0;
|
|
|
|
if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay))
|
|
/* Switch regs accept value in ns, convert ps to ns */
|
|
delay = delay / 1000;
|
|
else if (mode == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
mode == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
delay = 2;
|
|
|
|
if (!FIELD_FIT(QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK, delay)) {
|
|
dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value");
|
|
delay = 3;
|
|
}
|
|
|
|
priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay;
|
|
|
|
/* Skip sgmii parsing for rgmii* mode */
|
|
if (mode == PHY_INTERFACE_MODE_RGMII ||
|
|
mode == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
mode == PHY_INTERFACE_MODE_RGMII_TXID ||
|
|
mode == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
break;
|
|
|
|
if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge"))
|
|
priv->ports_config.sgmii_tx_clk_falling_edge = true;
|
|
|
|
if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge"))
|
|
priv->ports_config.sgmii_rx_clk_falling_edge = true;
|
|
|
|
if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) {
|
|
priv->ports_config.sgmii_enable_pll = true;
|
|
|
|
if (priv->switch_id == QCA8K_ID_QCA8327) {
|
|
dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling");
|
|
priv->ports_config.sgmii_enable_pll = false;
|
|
}
|
|
|
|
if (priv->switch_revision < 2)
|
|
dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more.");
|
|
}
|
|
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_setup(struct dsa_switch *ds)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
int cpu_port, ret, i;
|
|
u32 mask;
|
|
|
|
cpu_port = qca8k_find_cpu_port(ds);
|
|
if (cpu_port < 0) {
|
|
dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
|
|
return cpu_port;
|
|
}
|
|
|
|
/* Parse CPU port config to be later used in phy_link mac_config */
|
|
ret = qca8k_parse_port_config(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qca8k_setup_mdio_bus(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qca8k_setup_of_pws_reg(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qca8k_setup_mac_pwr_sel(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Make sure MAC06 is disabled */
|
|
ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL,
|
|
QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
|
|
if (ret) {
|
|
dev_err(priv->dev, "failed disabling MAC06 exchange");
|
|
return ret;
|
|
}
|
|
|
|
/* Enable CPU Port */
|
|
ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
|
|
QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
|
|
if (ret) {
|
|
dev_err(priv->dev, "failed enabling CPU port");
|
|
return ret;
|
|
}
|
|
|
|
/* Enable MIB counters */
|
|
ret = qca8k_mib_init(priv);
|
|
if (ret)
|
|
dev_warn(priv->dev, "mib init failed");
|
|
|
|
/* Initial setup of all ports */
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
/* Disable forwarding by default on all ports */
|
|
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
|
|
QCA8K_PORT_LOOKUP_MEMBER, 0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable QCA header mode on all cpu ports */
|
|
if (dsa_is_cpu_port(ds, i)) {
|
|
ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
|
|
FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
|
|
FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
|
|
if (ret) {
|
|
dev_err(priv->dev, "failed enabling QCA header mode");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* Disable MAC by default on all user ports */
|
|
if (dsa_is_user_port(ds, i))
|
|
qca8k_port_set_status(priv, i, 0);
|
|
}
|
|
|
|
/* Forward all unknown frames to CPU port for Linux processing
|
|
* Notice that in multi-cpu config only one port should be set
|
|
* for igmp, unknown, multicast and broadcast packet
|
|
*/
|
|
ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
|
|
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
|
|
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
|
|
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
|
|
FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Setup connection between CPU port & user ports
|
|
* Configure specific switch configuration for ports
|
|
*/
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
/* CPU port gets connected to all user ports of the switch */
|
|
if (dsa_is_cpu_port(ds, i)) {
|
|
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
|
|
QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* Individual user ports get connected to CPU port only */
|
|
if (dsa_is_user_port(ds, i)) {
|
|
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
|
|
QCA8K_PORT_LOOKUP_MEMBER,
|
|
BIT(cpu_port));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Enable ARP Auto-learning by default */
|
|
ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
|
|
QCA8K_PORT_LOOKUP_LEARN);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* For port based vlans to work we need to set the
|
|
* default egress vid
|
|
*/
|
|
ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
|
|
QCA8K_EGREES_VLAN_PORT_MASK(i),
|
|
QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
|
|
QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
|
|
QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/* The port 5 of the qca8337 have some problem in flood condition. The
|
|
* original legacy driver had some specific buffer and priority settings
|
|
* for the different port suggested by the QCA switch team. Add this
|
|
* missing settings to improve switch stability under load condition.
|
|
* This problem is limited to qca8337 and other qca8k switch are not affected.
|
|
*/
|
|
if (priv->switch_id == QCA8K_ID_QCA8337) {
|
|
switch (i) {
|
|
/* The 2 CPU port and port 5 requires some different
|
|
* priority than any other ports.
|
|
*/
|
|
case 0:
|
|
case 5:
|
|
case 6:
|
|
mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
|
|
break;
|
|
default:
|
|
mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
|
|
QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
|
|
}
|
|
qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
|
|
|
|
mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
|
|
QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
|
|
QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
|
|
QCA8K_PORT_HOL_CTRL1_WRED_EN;
|
|
qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
|
|
QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
|
|
QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
|
|
QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
|
|
QCA8K_PORT_HOL_CTRL1_WRED_EN,
|
|
mask);
|
|
}
|
|
|
|
/* Set initial MTU for every port.
|
|
* We have only have a general MTU setting. So track
|
|
* every port and set the max across all port.
|
|
* Set per port MTU to 1500 as the MTU change function
|
|
* will add the overhead and if its set to 1518 then it
|
|
* will apply the overhead again and we will end up with
|
|
* MTU of 1536 instead of 1518
|
|
*/
|
|
priv->port_mtu[i] = ETH_DATA_LEN;
|
|
}
|
|
|
|
/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
|
|
if (priv->switch_id == QCA8K_ID_QCA8327) {
|
|
mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
|
|
QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
|
|
qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
|
|
QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK |
|
|
QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK,
|
|
mask);
|
|
}
|
|
|
|
/* Setup our port MTUs to match power on defaults */
|
|
ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
|
|
if (ret)
|
|
dev_warn(priv->dev, "failed setting MTU settings");
|
|
|
|
/* Flush the FDB table */
|
|
qca8k_fdb_flush(priv);
|
|
|
|
/* We don't have interrupts for link changes, so we need to poll */
|
|
ds->pcs_poll = true;
|
|
|
|
/* Set min a max ageing value supported */
|
|
ds->ageing_time_min = 7000;
|
|
ds->ageing_time_max = 458745000;
|
|
|
|
/* Set max number of LAGs supported */
|
|
ds->num_lag_ids = QCA8K_NUM_LAGS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
|
|
u32 reg)
|
|
{
|
|
u32 delay, val = 0;
|
|
int ret;
|
|
|
|
/* Delay can be declared in 3 different way.
|
|
* Mode to rgmii and internal-delay standard binding defined
|
|
* rgmii-id or rgmii-tx/rx phy mode set.
|
|
* The parse logic set a delay different than 0 only when one
|
|
* of the 3 different way is used. In all other case delay is
|
|
* not enabled. With ID or TX/RXID delay is enabled and set
|
|
* to the default and recommended value.
|
|
*/
|
|
if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) {
|
|
delay = priv->ports_config.rgmii_tx_delay[cpu_port_index];
|
|
|
|
val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) |
|
|
QCA8K_PORT_PAD_RGMII_TX_DELAY_EN;
|
|
}
|
|
|
|
if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) {
|
|
delay = priv->ports_config.rgmii_rx_delay[cpu_port_index];
|
|
|
|
val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) |
|
|
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN;
|
|
}
|
|
|
|
/* Set RGMII delay based on the selected values */
|
|
ret = qca8k_rmw(priv, reg,
|
|
QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK |
|
|
QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK |
|
|
QCA8K_PORT_PAD_RGMII_TX_DELAY_EN |
|
|
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN,
|
|
val);
|
|
if (ret)
|
|
dev_err(priv->dev, "Failed to set internal delay for CPU port%d",
|
|
cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6);
|
|
}
|
|
|
|
static void
|
|
qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
|
|
const struct phylink_link_state *state)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int cpu_port_index, ret;
|
|
u32 reg, val;
|
|
|
|
switch (port) {
|
|
case 0: /* 1st CPU port */
|
|
if (state->interface != PHY_INTERFACE_MODE_RGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
|
|
state->interface != PHY_INTERFACE_MODE_SGMII)
|
|
return;
|
|
|
|
reg = QCA8K_REG_PORT0_PAD_CTRL;
|
|
cpu_port_index = QCA8K_CPU_PORT0;
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
/* Internal PHY, nothing to do */
|
|
return;
|
|
case 6: /* 2nd CPU port / external PHY */
|
|
if (state->interface != PHY_INTERFACE_MODE_RGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
|
|
state->interface != PHY_INTERFACE_MODE_SGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_1000BASEX)
|
|
return;
|
|
|
|
reg = QCA8K_REG_PORT6_PAD_CTRL;
|
|
cpu_port_index = QCA8K_CPU_PORT6;
|
|
break;
|
|
default:
|
|
dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port);
|
|
return;
|
|
}
|
|
|
|
if (port != 6 && phylink_autoneg_inband(mode)) {
|
|
dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
|
|
__func__);
|
|
return;
|
|
}
|
|
|
|
switch (state->interface) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN);
|
|
|
|
/* Configure rgmii delay */
|
|
qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
|
|
|
|
/* QCA8337 requires to set rgmii rx delay for all ports.
|
|
* This is enabled through PORT5_PAD_CTRL for all ports,
|
|
* rather than individual port registers.
|
|
*/
|
|
if (priv->switch_id == QCA8K_ID_QCA8337)
|
|
qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL,
|
|
QCA8K_PORT_PAD_RGMII_RX_DELAY_EN);
|
|
break;
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
case PHY_INTERFACE_MODE_1000BASEX:
|
|
/* Enable SGMII on the port */
|
|
qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN);
|
|
|
|
/* Enable/disable SerDes auto-negotiation as necessary */
|
|
ret = qca8k_read(priv, QCA8K_REG_PWS, &val);
|
|
if (ret)
|
|
return;
|
|
if (phylink_autoneg_inband(mode))
|
|
val &= ~QCA8K_PWS_SERDES_AEN_DIS;
|
|
else
|
|
val |= QCA8K_PWS_SERDES_AEN_DIS;
|
|
qca8k_write(priv, QCA8K_REG_PWS, val);
|
|
|
|
/* Configure the SGMII parameters */
|
|
ret = qca8k_read(priv, QCA8K_REG_SGMII_CTRL, &val);
|
|
if (ret)
|
|
return;
|
|
|
|
val |= QCA8K_SGMII_EN_SD;
|
|
|
|
if (priv->ports_config.sgmii_enable_pll)
|
|
val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX |
|
|
QCA8K_SGMII_EN_TX;
|
|
|
|
if (dsa_is_cpu_port(ds, port)) {
|
|
/* CPU port, we're talking to the CPU MAC, be a PHY */
|
|
val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
|
|
val |= QCA8K_SGMII_MODE_CTRL_PHY;
|
|
} else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
|
|
val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
|
|
val |= QCA8K_SGMII_MODE_CTRL_MAC;
|
|
} else if (state->interface == PHY_INTERFACE_MODE_1000BASEX) {
|
|
val &= ~QCA8K_SGMII_MODE_CTRL_MASK;
|
|
val |= QCA8K_SGMII_MODE_CTRL_BASEX;
|
|
}
|
|
|
|
qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
|
|
|
|
/* From original code is reported port instability as SGMII also
|
|
* require delay set. Apply advised values here or take them from DT.
|
|
*/
|
|
if (state->interface == PHY_INTERFACE_MODE_SGMII)
|
|
qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
|
|
|
|
/* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
|
|
* falling edge is set writing in the PORT0 PAD reg
|
|
*/
|
|
if (priv->switch_id == QCA8K_ID_QCA8327 ||
|
|
priv->switch_id == QCA8K_ID_QCA8337)
|
|
reg = QCA8K_REG_PORT0_PAD_CTRL;
|
|
|
|
val = 0;
|
|
|
|
/* SGMII Clock phase configuration */
|
|
if (priv->ports_config.sgmii_rx_clk_falling_edge)
|
|
val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE;
|
|
|
|
if (priv->ports_config.sgmii_tx_clk_falling_edge)
|
|
val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE;
|
|
|
|
if (val)
|
|
ret = qca8k_rmw(priv, reg,
|
|
QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE |
|
|
QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
|
|
val);
|
|
|
|
break;
|
|
default:
|
|
dev_err(ds->dev, "xMII mode %s not supported for port %d\n",
|
|
phy_modes(state->interface), port);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
qca8k_phylink_validate(struct dsa_switch *ds, int port,
|
|
unsigned long *supported,
|
|
struct phylink_link_state *state)
|
|
{
|
|
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
|
|
|
|
switch (port) {
|
|
case 0: /* 1st CPU port */
|
|
if (state->interface != PHY_INTERFACE_MODE_NA &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
|
|
state->interface != PHY_INTERFACE_MODE_SGMII)
|
|
goto unsupported;
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
/* Internal PHY */
|
|
if (state->interface != PHY_INTERFACE_MODE_NA &&
|
|
state->interface != PHY_INTERFACE_MODE_GMII &&
|
|
state->interface != PHY_INTERFACE_MODE_INTERNAL)
|
|
goto unsupported;
|
|
break;
|
|
case 6: /* 2nd CPU port / external PHY */
|
|
if (state->interface != PHY_INTERFACE_MODE_NA &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_ID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_TXID &&
|
|
state->interface != PHY_INTERFACE_MODE_RGMII_RXID &&
|
|
state->interface != PHY_INTERFACE_MODE_SGMII &&
|
|
state->interface != PHY_INTERFACE_MODE_1000BASEX)
|
|
goto unsupported;
|
|
break;
|
|
default:
|
|
unsupported:
|
|
linkmode_zero(supported);
|
|
return;
|
|
}
|
|
|
|
phylink_set_port_modes(mask);
|
|
phylink_set(mask, Autoneg);
|
|
|
|
phylink_set(mask, 1000baseT_Full);
|
|
phylink_set(mask, 10baseT_Half);
|
|
phylink_set(mask, 10baseT_Full);
|
|
phylink_set(mask, 100baseT_Half);
|
|
phylink_set(mask, 100baseT_Full);
|
|
|
|
if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
|
|
phylink_set(mask, 1000baseX_Full);
|
|
|
|
phylink_set(mask, Pause);
|
|
phylink_set(mask, Asym_Pause);
|
|
|
|
linkmode_and(supported, supported, mask);
|
|
linkmode_and(state->advertising, state->advertising, mask);
|
|
}
|
|
|
|
static int
|
|
qca8k_phylink_mac_link_state(struct dsa_switch *ds, int port,
|
|
struct phylink_link_state *state)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
u32 reg;
|
|
int ret;
|
|
|
|
ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP);
|
|
state->an_complete = state->link;
|
|
state->an_enabled = !!(reg & QCA8K_PORT_STATUS_LINK_AUTO);
|
|
state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL :
|
|
DUPLEX_HALF;
|
|
|
|
switch (reg & QCA8K_PORT_STATUS_SPEED) {
|
|
case QCA8K_PORT_STATUS_SPEED_10:
|
|
state->speed = SPEED_10;
|
|
break;
|
|
case QCA8K_PORT_STATUS_SPEED_100:
|
|
state->speed = SPEED_100;
|
|
break;
|
|
case QCA8K_PORT_STATUS_SPEED_1000:
|
|
state->speed = SPEED_1000;
|
|
break;
|
|
default:
|
|
state->speed = SPEED_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
state->pause = MLO_PAUSE_NONE;
|
|
if (reg & QCA8K_PORT_STATUS_RXFLOW)
|
|
state->pause |= MLO_PAUSE_RX;
|
|
if (reg & QCA8K_PORT_STATUS_TXFLOW)
|
|
state->pause |= MLO_PAUSE_TX;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
|
|
phy_interface_t interface)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
|
|
qca8k_port_set_status(priv, port, 0);
|
|
}
|
|
|
|
static void
|
|
qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
|
|
phy_interface_t interface, struct phy_device *phydev,
|
|
int speed, int duplex, bool tx_pause, bool rx_pause)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
u32 reg;
|
|
|
|
if (phylink_autoneg_inband(mode)) {
|
|
reg = QCA8K_PORT_STATUS_LINK_AUTO;
|
|
} else {
|
|
switch (speed) {
|
|
case SPEED_10:
|
|
reg = QCA8K_PORT_STATUS_SPEED_10;
|
|
break;
|
|
case SPEED_100:
|
|
reg = QCA8K_PORT_STATUS_SPEED_100;
|
|
break;
|
|
case SPEED_1000:
|
|
reg = QCA8K_PORT_STATUS_SPEED_1000;
|
|
break;
|
|
default:
|
|
reg = QCA8K_PORT_STATUS_LINK_AUTO;
|
|
break;
|
|
}
|
|
|
|
if (duplex == DUPLEX_FULL)
|
|
reg |= QCA8K_PORT_STATUS_DUPLEX;
|
|
|
|
if (rx_pause || dsa_is_cpu_port(ds, port))
|
|
reg |= QCA8K_PORT_STATUS_RXFLOW;
|
|
|
|
if (tx_pause || dsa_is_cpu_port(ds, port))
|
|
reg |= QCA8K_PORT_STATUS_TXFLOW;
|
|
}
|
|
|
|
reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC;
|
|
|
|
qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg);
|
|
}
|
|
|
|
static void
|
|
qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data)
|
|
{
|
|
const struct qca8k_match_data *match_data;
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int i;
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
return;
|
|
|
|
match_data = of_device_get_match_data(priv->dev);
|
|
|
|
for (i = 0; i < match_data->mib_count; i++)
|
|
strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
|
|
ETH_GSTRING_LEN);
|
|
}
|
|
|
|
static void
|
|
qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
uint64_t *data)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
const struct qca8k_match_data *match_data;
|
|
const struct qca8k_mib_desc *mib;
|
|
u32 reg, i, val;
|
|
u32 hi = 0;
|
|
int ret;
|
|
|
|
match_data = of_device_get_match_data(priv->dev);
|
|
|
|
for (i = 0; i < match_data->mib_count; i++) {
|
|
mib = &ar8327_mib[i];
|
|
reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset;
|
|
|
|
ret = qca8k_read(priv, reg, &val);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
if (mib->size == 2) {
|
|
ret = qca8k_read(priv, reg + 4, &hi);
|
|
if (ret < 0)
|
|
continue;
|
|
}
|
|
|
|
data[i] = val;
|
|
if (mib->size == 2)
|
|
data[i] |= (u64)hi << 32;
|
|
}
|
|
}
|
|
|
|
static int
|
|
qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
{
|
|
const struct qca8k_match_data *match_data;
|
|
struct qca8k_priv *priv = ds->priv;
|
|
|
|
if (sset != ETH_SS_STATS)
|
|
return 0;
|
|
|
|
match_data = of_device_get_match_data(priv->dev);
|
|
|
|
return match_data->mib_count;
|
|
}
|
|
|
|
static int
|
|
qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port);
|
|
u32 reg;
|
|
int ret;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, ®);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
if (eee->eee_enabled)
|
|
reg |= lpi_en;
|
|
else
|
|
reg &= ~lpi_en;
|
|
ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg);
|
|
|
|
exit:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e)
|
|
{
|
|
/* Nothing to do on the port's MAC */
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u32 stp_state;
|
|
|
|
switch (state) {
|
|
case BR_STATE_DISABLED:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED;
|
|
break;
|
|
case BR_STATE_BLOCKING:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING;
|
|
break;
|
|
case BR_STATE_LISTENING:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING;
|
|
break;
|
|
case BR_STATE_LEARNING:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING;
|
|
break;
|
|
case BR_STATE_FORWARDING:
|
|
default:
|
|
stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD;
|
|
break;
|
|
}
|
|
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_STATE_MASK, stp_state);
|
|
}
|
|
|
|
static int qca8k_port_bridge_join(struct dsa_switch *ds, int port,
|
|
struct dsa_bridge bridge,
|
|
bool *tx_fwd_offload)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
int port_mask, cpu_port;
|
|
int i, ret;
|
|
|
|
cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
|
|
port_mask = BIT(cpu_port);
|
|
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
if (dsa_is_cpu_port(ds, i))
|
|
continue;
|
|
if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
|
|
continue;
|
|
/* Add this port to the portvlan mask of the other ports
|
|
* in the bridge
|
|
*/
|
|
ret = regmap_set_bits(priv->regmap,
|
|
QCA8K_PORT_LOOKUP_CTRL(i),
|
|
BIT(port));
|
|
if (ret)
|
|
return ret;
|
|
if (i != port)
|
|
port_mask |= BIT(i);
|
|
}
|
|
|
|
/* Add all other ports to this ports portvlan mask */
|
|
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_MEMBER, port_mask);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void qca8k_port_bridge_leave(struct dsa_switch *ds, int port,
|
|
struct dsa_bridge bridge)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
int cpu_port, i;
|
|
|
|
cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
|
|
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
if (dsa_is_cpu_port(ds, i))
|
|
continue;
|
|
if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
|
|
continue;
|
|
/* Remove this port to the portvlan mask of the other ports
|
|
* in the bridge
|
|
*/
|
|
regmap_clear_bits(priv->regmap,
|
|
QCA8K_PORT_LOOKUP_CTRL(i),
|
|
BIT(port));
|
|
}
|
|
|
|
/* Set the cpu port to be the only one in the portvlan mask of
|
|
* this port
|
|
*/
|
|
qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port));
|
|
}
|
|
|
|
static void
|
|
qca8k_port_fast_age(struct dsa_switch *ds, int port)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
qca8k_fdb_access(priv, QCA8K_FDB_FLUSH_PORT, port);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static int
|
|
qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
unsigned int secs = msecs / 1000;
|
|
u32 val;
|
|
|
|
/* AGE_TIME reg is set in 7s step */
|
|
val = secs / 7;
|
|
|
|
/* Handle case with 0 as val to NOT disable
|
|
* learning
|
|
*/
|
|
if (!val)
|
|
val = 1;
|
|
|
|
return regmap_update_bits(priv->regmap, QCA8K_REG_ATU_CTRL, QCA8K_ATU_AGE_TIME_MASK,
|
|
QCA8K_ATU_AGE_TIME(val));
|
|
}
|
|
|
|
static int
|
|
qca8k_port_enable(struct dsa_switch *ds, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
|
|
qca8k_port_set_status(priv, port, 1);
|
|
priv->port_sts[port].enabled = 1;
|
|
|
|
if (dsa_is_user_port(ds, port))
|
|
phy_support_asym_pause(phy);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_disable(struct dsa_switch *ds, int port)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
|
|
qca8k_port_set_status(priv, port, 0);
|
|
priv->port_sts[port].enabled = 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int i, mtu = 0;
|
|
|
|
priv->port_mtu[port] = new_mtu;
|
|
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++)
|
|
if (priv->port_mtu[i] > mtu)
|
|
mtu = priv->port_mtu[i];
|
|
|
|
/* Include L2 header / FCS length */
|
|
return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_max_mtu(struct dsa_switch *ds, int port)
|
|
{
|
|
return QCA8K_MAX_MTU;
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr,
|
|
u16 port_mask, u16 vid)
|
|
{
|
|
/* Set the vid to the port vlan id if no vid is set */
|
|
if (!vid)
|
|
vid = QCA8K_PORT_VID_DEF;
|
|
|
|
return qca8k_fdb_add(priv, addr, port_mask, vid,
|
|
QCA8K_ATU_STATUS_STATIC);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_add(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u16 port_mask = BIT(port);
|
|
|
|
return qca8k_port_fdb_insert(priv, addr, port_mask, vid);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_del(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
u16 port_mask = BIT(port);
|
|
|
|
if (!vid)
|
|
vid = QCA8K_PORT_VID_DEF;
|
|
|
|
return qca8k_fdb_del(priv, addr, port_mask, vid);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_fdb_dump(struct dsa_switch *ds, int port,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
|
|
struct qca8k_fdb _fdb = { 0 };
|
|
int cnt = QCA8K_NUM_FDB_RECORDS;
|
|
bool is_static;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) {
|
|
if (!_fdb.aging)
|
|
break;
|
|
is_static = (_fdb.aging == QCA8K_ATU_STATUS_STATIC);
|
|
ret = cb(_fdb.mac, _fdb.vid, is_static, data);
|
|
if (ret)
|
|
break;
|
|
}
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_port_mdb_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
const u8 *addr = mdb->addr;
|
|
u16 vid = mdb->vid;
|
|
|
|
return qca8k_fdb_search_and_insert(priv, BIT(port), addr, vid);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_mdb_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
const u8 *addr = mdb->addr;
|
|
u16 vid = mdb->vid;
|
|
|
|
return qca8k_fdb_search_and_del(priv, BIT(port), addr, vid);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_mirror_add(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror,
|
|
bool ingress)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int monitor_port, ret;
|
|
u32 reg, val;
|
|
|
|
/* Check for existent entry */
|
|
if ((ingress ? priv->mirror_rx : priv->mirror_tx) & BIT(port))
|
|
return -EEXIST;
|
|
|
|
ret = regmap_read(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* QCA83xx can have only one port set to mirror mode.
|
|
* Check that the correct port is requested and return error otherwise.
|
|
* When no mirror port is set, the values is set to 0xF
|
|
*/
|
|
monitor_port = FIELD_GET(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
|
|
if (monitor_port != 0xF && monitor_port != mirror->to_local_port)
|
|
return -EEXIST;
|
|
|
|
/* Set the monitor port */
|
|
val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM,
|
|
mirror->to_local_port);
|
|
ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
|
|
QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (ingress) {
|
|
reg = QCA8K_PORT_LOOKUP_CTRL(port);
|
|
val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
|
|
} else {
|
|
reg = QCA8K_REG_PORT_HOL_CTRL1(port);
|
|
val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
|
|
}
|
|
|
|
ret = regmap_update_bits(priv->regmap, reg, val, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Track mirror port for tx and rx to decide when the
|
|
* mirror port has to be disabled.
|
|
*/
|
|
if (ingress)
|
|
priv->mirror_rx |= BIT(port);
|
|
else
|
|
priv->mirror_tx |= BIT(port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
qca8k_port_mirror_del(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
u32 reg, val;
|
|
int ret;
|
|
|
|
if (mirror->ingress) {
|
|
reg = QCA8K_PORT_LOOKUP_CTRL(port);
|
|
val = QCA8K_PORT_LOOKUP_ING_MIRROR_EN;
|
|
} else {
|
|
reg = QCA8K_REG_PORT_HOL_CTRL1(port);
|
|
val = QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN;
|
|
}
|
|
|
|
ret = regmap_clear_bits(priv->regmap, reg, val);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (mirror->ingress)
|
|
priv->mirror_rx &= ~BIT(port);
|
|
else
|
|
priv->mirror_tx &= ~BIT(port);
|
|
|
|
/* No port set to send packet to mirror port. Disable mirror port */
|
|
if (!priv->mirror_rx && !priv->mirror_tx) {
|
|
val = FIELD_PREP(QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, 0xF);
|
|
ret = regmap_update_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
|
|
QCA8K_GLOBAL_FW_CTRL0_MIRROR_PORT_NUM, val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
err:
|
|
dev_err(priv->dev, "Failed to del mirror port from %d", port);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int ret;
|
|
|
|
if (vlan_filtering) {
|
|
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_VLAN_MODE_MASK,
|
|
QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE);
|
|
} else {
|
|
ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port),
|
|
QCA8K_PORT_LOOKUP_VLAN_MODE_MASK,
|
|
QCA8K_PORT_LOOKUP_VLAN_MODE_NONE);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_port_vlan_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan,
|
|
struct netlink_ext_ack *extack)
|
|
{
|
|
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
|
|
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int ret;
|
|
|
|
ret = qca8k_vlan_add(priv, port, vlan->vid, untagged);
|
|
if (ret) {
|
|
dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret);
|
|
return ret;
|
|
}
|
|
|
|
if (pvid) {
|
|
ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port),
|
|
QCA8K_EGREES_VLAN_PORT_MASK(port),
|
|
QCA8K_EGREES_VLAN_PORT(port, vlan->vid));
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port),
|
|
QCA8K_PORT_VLAN_CVID(vlan->vid) |
|
|
QCA8K_PORT_VLAN_SVID(vlan->vid));
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
qca8k_port_vlan_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int ret;
|
|
|
|
ret = qca8k_vlan_del(priv, port, vlan->vid);
|
|
if (ret)
|
|
dev_err(priv->dev, "Failed to delete VLAN from port %d (%d)", port, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
|
|
/* Communicate to the phy internal driver the switch revision.
|
|
* Based on the switch revision different values needs to be
|
|
* set to the dbg and mmd reg on the phy.
|
|
* The first 2 bit are used to communicate the switch revision
|
|
* to the phy driver.
|
|
*/
|
|
if (port > 0 && port < 6)
|
|
return priv->switch_revision;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dsa_tag_protocol
|
|
qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
|
|
enum dsa_tag_protocol mp)
|
|
{
|
|
return DSA_TAG_PROTO_QCA;
|
|
}
|
|
|
|
static bool
|
|
qca8k_lag_can_offload(struct dsa_switch *ds,
|
|
struct net_device *lag,
|
|
struct netdev_lag_upper_info *info)
|
|
{
|
|
struct dsa_port *dp;
|
|
int id, members = 0;
|
|
|
|
id = dsa_lag_id(ds->dst, lag);
|
|
if (id < 0 || id >= ds->num_lag_ids)
|
|
return false;
|
|
|
|
dsa_lag_foreach_port(dp, ds->dst, lag)
|
|
/* Includes the port joining the LAG */
|
|
members++;
|
|
|
|
if (members > QCA8K_NUM_PORTS_FOR_LAG)
|
|
return false;
|
|
|
|
if (info->tx_type != NETDEV_LAG_TX_TYPE_HASH)
|
|
return false;
|
|
|
|
if (info->hash_type != NETDEV_LAG_HASH_L2 &&
|
|
info->hash_type != NETDEV_LAG_HASH_L23)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int
|
|
qca8k_lag_setup_hash(struct dsa_switch *ds,
|
|
struct net_device *lag,
|
|
struct netdev_lag_upper_info *info)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
bool unique_lag = true;
|
|
u32 hash = 0;
|
|
int i, id;
|
|
|
|
id = dsa_lag_id(ds->dst, lag);
|
|
|
|
switch (info->hash_type) {
|
|
case NETDEV_LAG_HASH_L23:
|
|
hash |= QCA8K_TRUNK_HASH_SIP_EN;
|
|
hash |= QCA8K_TRUNK_HASH_DIP_EN;
|
|
fallthrough;
|
|
case NETDEV_LAG_HASH_L2:
|
|
hash |= QCA8K_TRUNK_HASH_SA_EN;
|
|
hash |= QCA8K_TRUNK_HASH_DA_EN;
|
|
break;
|
|
default: /* We should NEVER reach this */
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* Check if we are the unique configured LAG */
|
|
dsa_lags_foreach_id(i, ds->dst)
|
|
if (i != id && dsa_lag_dev(ds->dst, i)) {
|
|
unique_lag = false;
|
|
break;
|
|
}
|
|
|
|
/* Hash Mode is global. Make sure the same Hash Mode
|
|
* is set to all the 4 possible lag.
|
|
* If we are the unique LAG we can set whatever hash
|
|
* mode we want.
|
|
* To change hash mode it's needed to remove all LAG
|
|
* and change the mode with the latest.
|
|
*/
|
|
if (unique_lag) {
|
|
priv->lag_hash_mode = hash;
|
|
} else if (priv->lag_hash_mode != hash) {
|
|
netdev_err(lag, "Error: Mismatched Hash Mode across different lag is not supported\n");
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return regmap_update_bits(priv->regmap, QCA8K_TRUNK_HASH_EN_CTRL,
|
|
QCA8K_TRUNK_HASH_MASK, hash);
|
|
}
|
|
|
|
static int
|
|
qca8k_lag_refresh_portmap(struct dsa_switch *ds, int port,
|
|
struct net_device *lag, bool delete)
|
|
{
|
|
struct qca8k_priv *priv = ds->priv;
|
|
int ret, id, i;
|
|
u32 val;
|
|
|
|
id = dsa_lag_id(ds->dst, lag);
|
|
|
|
/* Read current port member */
|
|
ret = regmap_read(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL0, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Shift val to the correct trunk */
|
|
val >>= QCA8K_REG_GOL_TRUNK_SHIFT(id);
|
|
val &= QCA8K_REG_GOL_TRUNK_MEMBER_MASK;
|
|
if (delete)
|
|
val &= ~BIT(port);
|
|
else
|
|
val |= BIT(port);
|
|
|
|
/* Update port member. With empty portmap disable trunk */
|
|
ret = regmap_update_bits(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL0,
|
|
QCA8K_REG_GOL_TRUNK_MEMBER(id) |
|
|
QCA8K_REG_GOL_TRUNK_EN(id),
|
|
!val << QCA8K_REG_GOL_TRUNK_SHIFT(id) |
|
|
val << QCA8K_REG_GOL_TRUNK_SHIFT(id));
|
|
|
|
/* Search empty member if adding or port on deleting */
|
|
for (i = 0; i < QCA8K_NUM_PORTS_FOR_LAG; i++) {
|
|
ret = regmap_read(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL(id), &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val >>= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i);
|
|
val &= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_MASK;
|
|
|
|
if (delete) {
|
|
/* If port flagged to be disabled assume this member is
|
|
* empty
|
|
*/
|
|
if (val != QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK)
|
|
continue;
|
|
|
|
val &= QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT_MASK;
|
|
if (val != port)
|
|
continue;
|
|
} else {
|
|
/* If port flagged to be enabled assume this member is
|
|
* already set
|
|
*/
|
|
if (val == QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN_MASK)
|
|
continue;
|
|
}
|
|
|
|
/* We have found the member to add/remove */
|
|
break;
|
|
}
|
|
|
|
/* Set port in the correct port mask or disable port if in delete mode */
|
|
return regmap_update_bits(priv->regmap, QCA8K_REG_GOL_TRUNK_CTRL(id),
|
|
QCA8K_REG_GOL_TRUNK_ID_MEM_ID_EN(id, i) |
|
|
QCA8K_REG_GOL_TRUNK_ID_MEM_ID_PORT(id, i),
|
|
!delete << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i) |
|
|
port << QCA8K_REG_GOL_TRUNK_ID_MEM_ID_SHIFT(id, i));
|
|
}
|
|
|
|
static int
|
|
qca8k_port_lag_join(struct dsa_switch *ds, int port,
|
|
struct net_device *lag,
|
|
struct netdev_lag_upper_info *info)
|
|
{
|
|
int ret;
|
|
|
|
if (!qca8k_lag_can_offload(ds, lag, info))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = qca8k_lag_setup_hash(ds, lag, info);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return qca8k_lag_refresh_portmap(ds, port, lag, false);
|
|
}
|
|
|
|
static int
|
|
qca8k_port_lag_leave(struct dsa_switch *ds, int port,
|
|
struct net_device *lag)
|
|
{
|
|
return qca8k_lag_refresh_portmap(ds, port, lag, true);
|
|
}
|
|
|
|
static const struct dsa_switch_ops qca8k_switch_ops = {
|
|
.get_tag_protocol = qca8k_get_tag_protocol,
|
|
.setup = qca8k_setup,
|
|
.get_strings = qca8k_get_strings,
|
|
.get_ethtool_stats = qca8k_get_ethtool_stats,
|
|
.get_sset_count = qca8k_get_sset_count,
|
|
.set_ageing_time = qca8k_set_ageing_time,
|
|
.get_mac_eee = qca8k_get_mac_eee,
|
|
.set_mac_eee = qca8k_set_mac_eee,
|
|
.port_enable = qca8k_port_enable,
|
|
.port_disable = qca8k_port_disable,
|
|
.port_change_mtu = qca8k_port_change_mtu,
|
|
.port_max_mtu = qca8k_port_max_mtu,
|
|
.port_stp_state_set = qca8k_port_stp_state_set,
|
|
.port_bridge_join = qca8k_port_bridge_join,
|
|
.port_bridge_leave = qca8k_port_bridge_leave,
|
|
.port_fast_age = qca8k_port_fast_age,
|
|
.port_fdb_add = qca8k_port_fdb_add,
|
|
.port_fdb_del = qca8k_port_fdb_del,
|
|
.port_fdb_dump = qca8k_port_fdb_dump,
|
|
.port_mdb_add = qca8k_port_mdb_add,
|
|
.port_mdb_del = qca8k_port_mdb_del,
|
|
.port_mirror_add = qca8k_port_mirror_add,
|
|
.port_mirror_del = qca8k_port_mirror_del,
|
|
.port_vlan_filtering = qca8k_port_vlan_filtering,
|
|
.port_vlan_add = qca8k_port_vlan_add,
|
|
.port_vlan_del = qca8k_port_vlan_del,
|
|
.phylink_validate = qca8k_phylink_validate,
|
|
.phylink_mac_link_state = qca8k_phylink_mac_link_state,
|
|
.phylink_mac_config = qca8k_phylink_mac_config,
|
|
.phylink_mac_link_down = qca8k_phylink_mac_link_down,
|
|
.phylink_mac_link_up = qca8k_phylink_mac_link_up,
|
|
.get_phy_flags = qca8k_get_phy_flags,
|
|
.port_lag_join = qca8k_port_lag_join,
|
|
.port_lag_leave = qca8k_port_lag_leave,
|
|
};
|
|
|
|
static int qca8k_read_switch_id(struct qca8k_priv *priv)
|
|
{
|
|
const struct qca8k_match_data *data;
|
|
u32 val;
|
|
u8 id;
|
|
int ret;
|
|
|
|
/* get the switches ID from the compatible */
|
|
data = of_device_get_match_data(priv->dev);
|
|
if (!data)
|
|
return -ENODEV;
|
|
|
|
ret = qca8k_read(priv, QCA8K_REG_MASK_CTRL, &val);
|
|
if (ret < 0)
|
|
return -ENODEV;
|
|
|
|
id = QCA8K_MASK_CTRL_DEVICE_ID(val);
|
|
if (id != data->id) {
|
|
dev_err(priv->dev, "Switch id detected %x but expected %x", id, data->id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
priv->switch_id = id;
|
|
|
|
/* Save revision to communicate to the internal PHY driver */
|
|
priv->switch_revision = QCA8K_MASK_CTRL_REV_ID(val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
qca8k_sw_probe(struct mdio_device *mdiodev)
|
|
{
|
|
struct qca8k_priv *priv;
|
|
int ret;
|
|
|
|
/* allocate the private data struct so that we can probe the switches
|
|
* ID register
|
|
*/
|
|
priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->bus = mdiodev->bus;
|
|
priv->dev = &mdiodev->dev;
|
|
|
|
priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
|
|
GPIOD_ASIS);
|
|
if (IS_ERR(priv->reset_gpio))
|
|
return PTR_ERR(priv->reset_gpio);
|
|
|
|
if (priv->reset_gpio) {
|
|
gpiod_set_value_cansleep(priv->reset_gpio, 1);
|
|
/* The active low duration must be greater than 10 ms
|
|
* and checkpatch.pl wants 20 ms.
|
|
*/
|
|
msleep(20);
|
|
gpiod_set_value_cansleep(priv->reset_gpio, 0);
|
|
}
|
|
|
|
/* Start by setting up the register mapping */
|
|
priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv,
|
|
&qca8k_regmap_config);
|
|
if (IS_ERR(priv->regmap)) {
|
|
dev_err(priv->dev, "regmap initialization failed");
|
|
return PTR_ERR(priv->regmap);
|
|
}
|
|
|
|
/* Check the detected switch id */
|
|
ret = qca8k_read_switch_id(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->ds = devm_kzalloc(&mdiodev->dev, sizeof(*priv->ds), GFP_KERNEL);
|
|
if (!priv->ds)
|
|
return -ENOMEM;
|
|
|
|
priv->ds->dev = &mdiodev->dev;
|
|
priv->ds->num_ports = QCA8K_NUM_PORTS;
|
|
priv->ds->priv = priv;
|
|
priv->ops = qca8k_switch_ops;
|
|
priv->ds->ops = &priv->ops;
|
|
mutex_init(&priv->reg_mutex);
|
|
dev_set_drvdata(&mdiodev->dev, priv);
|
|
|
|
return dsa_register_switch(priv->ds);
|
|
}
|
|
|
|
static void
|
|
qca8k_sw_remove(struct mdio_device *mdiodev)
|
|
{
|
|
struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
|
|
int i;
|
|
|
|
if (!priv)
|
|
return;
|
|
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++)
|
|
qca8k_port_set_status(priv, i, 0);
|
|
|
|
dsa_unregister_switch(priv->ds);
|
|
|
|
dev_set_drvdata(&mdiodev->dev, NULL);
|
|
}
|
|
|
|
static void qca8k_sw_shutdown(struct mdio_device *mdiodev)
|
|
{
|
|
struct qca8k_priv *priv = dev_get_drvdata(&mdiodev->dev);
|
|
|
|
if (!priv)
|
|
return;
|
|
|
|
dsa_switch_shutdown(priv->ds);
|
|
|
|
dev_set_drvdata(&mdiodev->dev, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static void
|
|
qca8k_set_pm(struct qca8k_priv *priv, int enable)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < QCA8K_NUM_PORTS; i++) {
|
|
if (!priv->port_sts[i].enabled)
|
|
continue;
|
|
|
|
qca8k_port_set_status(priv, i, enable);
|
|
}
|
|
}
|
|
|
|
static int qca8k_suspend(struct device *dev)
|
|
{
|
|
struct qca8k_priv *priv = dev_get_drvdata(dev);
|
|
|
|
qca8k_set_pm(priv, 0);
|
|
|
|
return dsa_switch_suspend(priv->ds);
|
|
}
|
|
|
|
static int qca8k_resume(struct device *dev)
|
|
{
|
|
struct qca8k_priv *priv = dev_get_drvdata(dev);
|
|
|
|
qca8k_set_pm(priv, 1);
|
|
|
|
return dsa_switch_resume(priv->ds);
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(qca8k_pm_ops,
|
|
qca8k_suspend, qca8k_resume);
|
|
|
|
static const struct qca8k_match_data qca8327 = {
|
|
.id = QCA8K_ID_QCA8327,
|
|
.reduced_package = true,
|
|
.mib_count = QCA8K_QCA832X_MIB_COUNT,
|
|
};
|
|
|
|
static const struct qca8k_match_data qca8328 = {
|
|
.id = QCA8K_ID_QCA8327,
|
|
.mib_count = QCA8K_QCA832X_MIB_COUNT,
|
|
};
|
|
|
|
static const struct qca8k_match_data qca833x = {
|
|
.id = QCA8K_ID_QCA8337,
|
|
.mib_count = QCA8K_QCA833X_MIB_COUNT,
|
|
};
|
|
|
|
static const struct of_device_id qca8k_of_match[] = {
|
|
{ .compatible = "qca,qca8327", .data = &qca8327 },
|
|
{ .compatible = "qca,qca8328", .data = &qca8328 },
|
|
{ .compatible = "qca,qca8334", .data = &qca833x },
|
|
{ .compatible = "qca,qca8337", .data = &qca833x },
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static struct mdio_driver qca8kmdio_driver = {
|
|
.probe = qca8k_sw_probe,
|
|
.remove = qca8k_sw_remove,
|
|
.shutdown = qca8k_sw_shutdown,
|
|
.mdiodrv.driver = {
|
|
.name = "qca8k",
|
|
.of_match_table = qca8k_of_match,
|
|
.pm = &qca8k_pm_ops,
|
|
},
|
|
};
|
|
|
|
mdio_module_driver(qca8kmdio_driver);
|
|
|
|
MODULE_AUTHOR("Mathieu Olivari, John Crispin <john@phrozen.org>");
|
|
MODULE_DESCRIPTION("Driver for QCA8K ethernet switch family");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:qca8k");
|