linux/arch/arm/mach-omap2/sr_device.c
Tony Lindgren 7045112787 ARM: OMAP2+: Remove hwmod .rev data and use local SoC checks instead
We can just check for omap2 and 3 for i2c and smartreflex locally.
The rest of the .rev data is already unused.

Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-03-26 11:26:26 -07:00

179 lines
4.5 KiB
C

/*
* OMAP3/OMAP4 smartreflex device file
*
* Author: Thara Gopinath <thara@ti.com>
*
* Based originally on code from smartreflex.c
* Copyright (C) 2010 Texas Instruments, Inc.
* Thara Gopinath <thara@ti.com>
*
* Copyright (C) 2008 Nokia Corporation
* Kalle Jokiniemi
*
* Copyright (C) 2007 Texas Instruments, Inc.
* Lesly A M <x0080970@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/power/smartreflex.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/io.h>
#include "soc.h"
#include "omap_device.h"
#include "voltage.h"
#include "control.h"
#include "pm.h"
static bool sr_enable_on_init;
/* Read EFUSE values from control registers for OMAP3430 */
static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
struct omap_sr_data *sr_data)
{
struct omap_sr_nvalue_table *nvalue_table;
int i, j, count = 0;
sr_data->nvalue_count = 0;
sr_data->nvalue_table = NULL;
while (volt_data[count].volt_nominal)
count++;
nvalue_table = kcalloc(count, sizeof(*nvalue_table), GFP_KERNEL);
if (!nvalue_table)
return;
for (i = 0, j = 0; i < count; i++) {
u32 v;
/*
* In OMAP4 the efuse registers are 24 bit aligned.
* A readl_relaxed will fail for non-32 bit aligned address
* and hence the 8-bit read and shift.
*/
if (cpu_is_omap44xx()) {
u16 offset = volt_data[i].sr_efuse_offs;
v = omap_ctrl_readb(offset) |
omap_ctrl_readb(offset + 1) << 8 |
omap_ctrl_readb(offset + 2) << 16;
} else {
v = omap_ctrl_readl(volt_data[i].sr_efuse_offs);
}
/*
* Many OMAP SoCs don't have the eFuse values set.
* For example, pretty much all OMAP3xxx before
* ES3.something.
*
* XXX There needs to be some way for board files or
* userspace to add these in.
*/
if (v == 0)
continue;
nvalue_table[j].nvalue = v;
nvalue_table[j].efuse_offs = volt_data[i].sr_efuse_offs;
nvalue_table[j].errminlimit = volt_data[i].sr_errminlimit;
nvalue_table[j].volt_nominal = volt_data[i].volt_nominal;
j++;
}
sr_data->nvalue_table = nvalue_table;
sr_data->nvalue_count = j;
}
extern struct omap_sr_data omap_sr_pdata[];
static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
{
struct omap_sr_data *sr_data = NULL;
struct omap_volt_data *volt_data;
struct omap_smartreflex_dev_attr *sr_dev_attr;
static int i;
if (!strncmp(oh->name, "smartreflex_mpu_iva", 20) ||
!strncmp(oh->name, "smartreflex_mpu", 16))
sr_data = &omap_sr_pdata[OMAP_SR_MPU];
else if (!strncmp(oh->name, "smartreflex_core", 17))
sr_data = &omap_sr_pdata[OMAP_SR_CORE];
else if (!strncmp(oh->name, "smartreflex_iva", 16))
sr_data = &omap_sr_pdata[OMAP_SR_IVA];
if (!sr_data) {
pr_err("%s: Unknown instance %s\n", __func__, oh->name);
return -EINVAL;
}
sr_dev_attr = (struct omap_smartreflex_dev_attr *)oh->dev_attr;
if (!sr_dev_attr || !sr_dev_attr->sensor_voltdm_name) {
pr_err("%s: No voltage domain specified for %s. Cannot initialize\n",
__func__, oh->name);
goto exit;
}
sr_data->name = oh->name;
if (cpu_is_omap343x())
sr_data->ip_type = 1;
else
sr_data->ip_type = 2;
sr_data->senn_mod = 0x1;
sr_data->senp_mod = 0x1;
if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sr_data->err_weight = OMAP3430_SR_ERRWEIGHT;
sr_data->err_maxlimit = OMAP3430_SR_ERRMAXLIMIT;
sr_data->accum_data = OMAP3430_SR_ACCUMDATA;
if (!(strcmp(sr_data->name, "smartreflex_mpu"))) {
sr_data->senn_avgweight = OMAP3430_SR1_SENNAVGWEIGHT;
sr_data->senp_avgweight = OMAP3430_SR1_SENPAVGWEIGHT;
} else {
sr_data->senn_avgweight = OMAP3430_SR2_SENNAVGWEIGHT;
sr_data->senp_avgweight = OMAP3430_SR2_SENPAVGWEIGHT;
}
}
sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name);
if (!sr_data->voltdm) {
pr_err("%s: Unable to get voltage domain pointer for VDD %s\n",
__func__, sr_dev_attr->sensor_voltdm_name);
goto exit;
}
omap_voltage_get_volttable(sr_data->voltdm, &volt_data);
if (!volt_data) {
pr_err("%s: No Voltage table registered for VDD%d\n",
__func__, i + 1);
goto exit;
}
sr_set_nvalues(volt_data, sr_data);
sr_data->enable_on_init = sr_enable_on_init;
exit:
i++;
return 0;
}
/*
* API to be called from board files to enable smartreflex
* autocompensation at init.
*/
void __init omap_enable_smartreflex_on_init(void)
{
sr_enable_on_init = true;
}
int __init omap_devinit_smartreflex(void)
{
return omap_hwmod_for_each_by_class("smartreflex", sr_dev_init, NULL);
}