korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2025-01-10 15:54:39 +08:00
Code Issues Packages Projects Releases Wiki Activity
a8b659e7ff
linux/net/dsa/dsa_priv.h
Vladimir Oltean a8b659e7ff net: dsa: act as passthrough for bridge port flags 
There are multiple ways in which a PORT_BRIDGE_FLAGS attribute can be
expressed by the bridge through switchdev, and not all of them can be
emulated by DSA mid-layer API at the same time.

One possible configuration is when the bridge offloads the port flags
using a mask that has a single bit set - therefore only one feature
should change. However, DSA currently groups together unicast and
multicast flooding in the .port_egress_floods method, which limits our
options when we try to add support for turning off broadcast flooding:
do we extend .port_egress_floods with a third parameter which b53 and
mv88e6xxx will ignore? But that means that the DSA layer, which
currently implements the PRE_BRIDGE_FLAGS attribute all by itself, will
see that .port_egress_floods is implemented, and will report that all 3
types of flooding are supported - not necessarily true.

Another configuration is when the user specifies more than one flag at
the same time, in the same netlink message. If we were to create one
individual function per offloadable bridge port flag, we would limit the
expressiveness of the switch driver of refusing certain combinations of
flag values. For example, a switch may not have an explicit knob for
flooding of unknown multicast, just for flooding in general. In that
case, the only correct thing to do is to allow changes to BR_FLOOD and
BR_MCAST_FLOOD in tandem, and never allow mismatched values. But having
a separate .port_set_unicast_flood and .port_set_multicast_flood would
not allow the driver to possibly reject that.

Also, DSA doesn't consider it necessary to inform the driver that a
SWITCHDEV_ATTR_ID_BRIDGE_MROUTER attribute was offloaded, because it
just calls .port_egress_floods for the CPU port. When we'll add support
for the plain SWITCHDEV_ATTR_ID_PORT_MROUTER, that will become a real
problem because the flood settings will need to be held statefully in
the DSA middle layer, otherwise changing the mrouter port attribute will
impact the flooding attribute. And that's _assuming_ that the underlying
hardware doesn't have anything else to do when a multicast router
attaches to a port than flood unknown traffic to it.  If it does, there
will need to be a dedicated .port_set_mrouter anyway.

So we need to let the DSA drivers see the exact form that the bridge
passes this switchdev attribute in, otherwise we are standing in the
way. Therefore we also need to use this form of language when
communicating to the driver that it needs to configure its initial
(before bridge join) and final (after bridge leave) port flags.

The b53 and mv88e6xxx drivers are converted to the passthrough API and
their implementation of .port_egress_floods is split into two: a
function that configures unicast flooding and another for multicast.
The mv88e6xxx implementation is quite hairy, and it turns out that
the implementations of unknown unicast flooding are actually the same
for 6185 and for 6352:

behind the confusing names actually lie two individual bits:
NO_UNKNOWN_MC -> FLOOD_UC = 0x4 = BIT(2)
NO_UNKNOWN_UC -> FLOOD_MC = 0x8 = BIT(3)

so there was no reason to entangle them in the first place.

Whereas the 6185 writes to MV88E6185_PORT_CTL0_FORWARD_UNKNOWN of
PORT_CTL0, which has the exact same bit index. I have left the
implementations separate though, for the only reason that the names are
different enough to confuse me, since I am not able to double-check with
a user manual. The multicast flooding setting for 6185 is in a different
register than for 6352 though.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12 17:08:04 -08:00

344 lines
9.6 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* net/dsa/dsa_priv.h - Hardware switch handling
* Copyright (c) 2008-2009 Marvell Semiconductor
*/
#ifndef __DSA_PRIV_H
#define __DSA_PRIV_H
#include <linux/if_bridge.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
#include <linux/netpoll.h>
#include <net/dsa.h>
#include <net/gro_cells.h>
enum {
DSA_NOTIFIER_AGEING_TIME,
DSA_NOTIFIER_BRIDGE_JOIN,
DSA_NOTIFIER_BRIDGE_LEAVE,
DSA_NOTIFIER_FDB_ADD,
DSA_NOTIFIER_FDB_DEL,
DSA_NOTIFIER_HSR_JOIN,
DSA_NOTIFIER_HSR_LEAVE,
DSA_NOTIFIER_LAG_CHANGE,
DSA_NOTIFIER_LAG_JOIN,
DSA_NOTIFIER_LAG_LEAVE,
DSA_NOTIFIER_MDB_ADD,
DSA_NOTIFIER_MDB_DEL,
DSA_NOTIFIER_VLAN_ADD,
DSA_NOTIFIER_VLAN_DEL,
DSA_NOTIFIER_MTU,
DSA_NOTIFIER_TAG_PROTO,
};
/* DSA_NOTIFIER_AGEING_TIME */
struct dsa_notifier_ageing_time_info {
unsigned int ageing_time;
};
/* DSA_NOTIFIER_BRIDGE_* */
struct dsa_notifier_bridge_info {
struct net_device *br;
int tree_index;
int sw_index;
int port;
};
/* DSA_NOTIFIER_FDB_* */
struct dsa_notifier_fdb_info {
int sw_index;
int port;
const unsigned char *addr;
u16 vid;
};
/* DSA_NOTIFIER_MDB_* */
struct dsa_notifier_mdb_info {
const struct switchdev_obj_port_mdb *mdb;
int sw_index;
int port;
};
/* DSA_NOTIFIER_LAG_* */
struct dsa_notifier_lag_info {
struct net_device *lag;
int sw_index;
int port;
struct netdev_lag_upper_info *info;
};
/* DSA_NOTIFIER_VLAN_* */
struct dsa_notifier_vlan_info {
const struct switchdev_obj_port_vlan *vlan;
int sw_index;
int port;
};
/* DSA_NOTIFIER_MTU */
struct dsa_notifier_mtu_info {
bool propagate_upstream;
int sw_index;
int port;
int mtu;
};
/* DSA_NOTIFIER_TAG_PROTO_* */
struct dsa_notifier_tag_proto_info {
const struct dsa_device_ops *tag_ops;
};
struct dsa_switchdev_event_work {
struct dsa_switch *ds;
int port;
struct work_struct work;
unsigned long event;
/* Specific for SWITCHDEV_FDB_ADD_TO_DEVICE and
* SWITCHDEV_FDB_DEL_TO_DEVICE
*/
unsigned char addr[ETH_ALEN];
u16 vid;
};
/* DSA_NOTIFIER_HSR_* */
struct dsa_notifier_hsr_info {
struct net_device *hsr;
int sw_index;
int port;
};
struct dsa_slave_priv {
/* Copy of CPU port xmit for faster access in slave transmit hot path */
struct sk_buff * (*xmit)(struct sk_buff *skb,
struct net_device *dev);
struct gro_cells gcells;
/* DSA port data, such as switch, port index, etc. */
struct dsa_port *dp;
#ifdef CONFIG_NET_POLL_CONTROLLER
struct netpoll *netpoll;
#endif
/* TC context */
struct list_head mall_tc_list;
};
/* dsa.c */
const struct dsa_device_ops *dsa_tag_driver_get(int tag_protocol);
void dsa_tag_driver_put(const struct dsa_device_ops *ops);
const struct dsa_device_ops *dsa_find_tagger_by_name(const char *buf);
bool dsa_schedule_work(struct work_struct *work);
const char *dsa_tag_protocol_to_str(const struct dsa_device_ops *ops);
/* master.c */
int dsa_master_setup(struct net_device *dev, struct dsa_port *cpu_dp);
void dsa_master_teardown(struct net_device *dev);
static inline struct net_device *dsa_master_find_slave(struct net_device *dev,
int device, int port)
{
struct dsa_port *cpu_dp = dev->dsa_ptr;
struct dsa_switch_tree *dst = cpu_dp->dst;
struct dsa_port *dp;
list_for_each_entry(dp, &dst->ports, list)
if (dp->ds->index == device && dp->index == port &&
dp->type == DSA_PORT_TYPE_USER)
return dp->slave;
return NULL;
}
/* port.c */
void dsa_port_set_tag_protocol(struct dsa_port *cpu_dp,
const struct dsa_device_ops *tag_ops);
int dsa_port_set_state(struct dsa_port *dp, u8 state);
int dsa_port_enable_rt(struct dsa_port *dp, struct phy_device *phy);
int dsa_port_enable(struct dsa_port *dp, struct phy_device *phy);
void dsa_port_disable_rt(struct dsa_port *dp);
void dsa_port_disable(struct dsa_port *dp);
int dsa_port_bridge_join(struct dsa_port *dp, struct net_device *br);
void dsa_port_bridge_leave(struct dsa_port *dp, struct net_device *br);
int dsa_port_lag_change(struct dsa_port *dp,
struct netdev_lag_lower_state_info *linfo);
int dsa_port_lag_join(struct dsa_port *dp, struct net_device *lag_dev,
struct netdev_lag_upper_info *uinfo);
void dsa_port_lag_leave(struct dsa_port *dp, struct net_device *lag_dev);
int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering);
bool dsa_port_skip_vlan_configuration(struct dsa_port *dp);
int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock);
int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
bool propagate_upstream);
int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
u16 vid);
int dsa_port_fdb_del(struct dsa_port *dp, const unsigned char *addr,
u16 vid);
int dsa_port_fdb_dump(struct dsa_port *dp, dsa_fdb_dump_cb_t *cb, void *data);
int dsa_port_mdb_add(const struct dsa_port *dp,
const struct switchdev_obj_port_mdb *mdb);
int dsa_port_mdb_del(const struct dsa_port *dp,
const struct switchdev_obj_port_mdb *mdb);
int dsa_port_pre_bridge_flags(const struct dsa_port *dp,
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack);
int dsa_port_bridge_flags(const struct dsa_port *dp,
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack);
int dsa_port_mrouter(struct dsa_port *dp, bool mrouter,
struct netlink_ext_ack *extack);
int dsa_port_vlan_add(struct dsa_port *dp,
const struct switchdev_obj_port_vlan *vlan);
int dsa_port_vlan_del(struct dsa_port *dp,
const struct switchdev_obj_port_vlan *vlan);
int dsa_port_link_register_of(struct dsa_port *dp);
void dsa_port_link_unregister_of(struct dsa_port *dp);
int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr);
void dsa_port_hsr_leave(struct dsa_port *dp, struct net_device *hsr);
extern const struct phylink_mac_ops dsa_port_phylink_mac_ops;
static inline bool dsa_port_offloads_netdev(struct dsa_port *dp,
struct net_device *dev)
{
/* Switchdev offloading can be configured on: */
if (dev == dp->slave)
/* DSA ports directly connected to a bridge, and event
* was emitted for the ports themselves.
*/
return true;
if (dp->bridge_dev == dev)
/* DSA ports connected to a bridge, and event was emitted
* for the bridge.
*/
return true;
if (dp->lag_dev == dev)
/* DSA ports connected to a bridge via a LAG */
return true;
return false;
}
/* Returns true if any port of this tree offloads the given net_device */
static inline bool dsa_tree_offloads_netdev(struct dsa_switch_tree *dst,
struct net_device *dev)
{
struct dsa_port *dp;
list_for_each_entry(dp, &dst->ports, list)
if (dsa_port_offloads_netdev(dp, dev))
return true;
return false;
}
/* slave.c */
extern const struct dsa_device_ops notag_netdev_ops;
void dsa_slave_mii_bus_init(struct dsa_switch *ds);
int dsa_slave_create(struct dsa_port *dp);
void dsa_slave_destroy(struct net_device *slave_dev);
int dsa_slave_suspend(struct net_device *slave_dev);
int dsa_slave_resume(struct net_device *slave_dev);
int dsa_slave_register_notifier(void);
void dsa_slave_unregister_notifier(void);
void dsa_slave_setup_tagger(struct net_device *slave);
int dsa_slave_change_mtu(struct net_device *dev, int new_mtu);
static inline struct dsa_port *dsa_slave_to_port(const struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
return p->dp;
}
static inline struct net_device *
dsa_slave_to_master(const struct net_device *dev)
{
struct dsa_port *dp = dsa_slave_to_port(dev);
return dp->cpu_dp->master;
}
/* If under a bridge with vlan_filtering=0, make sure to send pvid-tagged
* frames as untagged, since the bridge will not untag them.
*/
static inline struct sk_buff *dsa_untag_bridge_pvid(struct sk_buff *skb)
{
struct dsa_port *dp = dsa_slave_to_port(skb->dev);
struct net_device *br = dp->bridge_dev;
struct net_device *dev = skb->dev;
struct net_device *upper_dev;
u16 vid, pvid, proto;
int err;
if (!br || br_vlan_enabled(br))
return skb;
err = br_vlan_get_proto(br, &proto);
if (err)
return skb;
/* Move VLAN tag from data to hwaccel */
if (!skb_vlan_tag_present(skb) && skb->protocol == htons(proto)) {
skb = skb_vlan_untag(skb);
if (!skb)
return NULL;
}
if (!skb_vlan_tag_present(skb))
return skb;
vid = skb_vlan_tag_get_id(skb);
/* We already run under an RCU read-side critical section since
* we are called from netif_receive_skb_list_internal().
*/
err = br_vlan_get_pvid_rcu(dev, &pvid);
if (err)
return skb;
if (vid != pvid)
return skb;
/* The sad part about attempting to untag from DSA is that we
* don't know, unless we check, if the skb will end up in
* the bridge's data path - br_allowed_ingress() - or not.
* For example, there might be an 8021q upper for the
* default_pvid of the bridge, which will steal VLAN-tagged traffic
* from the bridge's data path. This is a configuration that DSA
* supports because vlan_filtering is 0. In that case, we should
* definitely keep the tag, to make sure it keeps working.
*/
upper_dev = __vlan_find_dev_deep_rcu(br, htons(proto), vid);
if (upper_dev)
return skb;
__vlan_hwaccel_clear_tag(skb);
return skb;
}
/* switch.c */
int dsa_switch_register_notifier(struct dsa_switch *ds);
void dsa_switch_unregister_notifier(struct dsa_switch *ds);
/* dsa2.c */
void dsa_lag_map(struct dsa_switch_tree *dst, struct net_device *lag);
void dsa_lag_unmap(struct dsa_switch_tree *dst, struct net_device *lag);
int dsa_tree_notify(struct dsa_switch_tree *dst, unsigned long e, void *v);
int dsa_broadcast(unsigned long e, void *v);
int dsa_tree_change_tag_proto(struct dsa_switch_tree *dst,
struct net_device *master,
const struct dsa_device_ops *tag_ops,
const struct dsa_device_ops *old_tag_ops);
extern struct list_head dsa_tree_list;
#endif
Reference in New Issue View Git Blame Copy Permalink