mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 19:45:06 +08:00
a8a93c6f99
Remove all .owner fields from platform drivers
2477 lines
63 KiB
C
2477 lines
63 KiB
C
/*
|
|
* smc91x.c
|
|
* This is a driver for SMSC's 91C9x/91C1xx single-chip Ethernet devices.
|
|
*
|
|
* Copyright (C) 1996 by Erik Stahlman
|
|
* Copyright (C) 2001 Standard Microsystems Corporation
|
|
* Developed by Simple Network Magic Corporation
|
|
* Copyright (C) 2003 Monta Vista Software, Inc.
|
|
* Unified SMC91x driver by Nicolas Pitre
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
* Arguments:
|
|
* io = for the base address
|
|
* irq = for the IRQ
|
|
* nowait = 0 for normal wait states, 1 eliminates additional wait states
|
|
*
|
|
* original author:
|
|
* Erik Stahlman <erik@vt.edu>
|
|
*
|
|
* hardware multicast code:
|
|
* Peter Cammaert <pc@denkart.be>
|
|
*
|
|
* contributors:
|
|
* Daris A Nevil <dnevil@snmc.com>
|
|
* Nicolas Pitre <nico@fluxnic.net>
|
|
* Russell King <rmk@arm.linux.org.uk>
|
|
*
|
|
* History:
|
|
* 08/20/00 Arnaldo Melo fix kfree(skb) in smc_hardware_send_packet
|
|
* 12/15/00 Christian Jullien fix "Warning: kfree_skb on hard IRQ"
|
|
* 03/16/01 Daris A Nevil modified smc9194.c for use with LAN91C111
|
|
* 08/22/01 Scott Anderson merge changes from smc9194 to smc91111
|
|
* 08/21/01 Pramod B Bhardwaj added support for RevB of LAN91C111
|
|
* 12/20/01 Jeff Sutherland initial port to Xscale PXA with DMA support
|
|
* 04/07/03 Nicolas Pitre unified SMC91x driver, killed irq races,
|
|
* more bus abstraction, big cleanup, etc.
|
|
* 29/09/03 Russell King - add driver model support
|
|
* - ethtool support
|
|
* - convert to use generic MII interface
|
|
* - add link up/down notification
|
|
* - don't try to handle full negotiation in
|
|
* smc_phy_configure
|
|
* - clean up (and fix stack overrun) in PHY
|
|
* MII read/write functions
|
|
* 22/09/04 Nicolas Pitre big update (see commit log for details)
|
|
*/
|
|
static const char version[] =
|
|
"smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <nico@fluxnic.net>";
|
|
|
|
/* Debugging level */
|
|
#ifndef SMC_DEBUG
|
|
#define SMC_DEBUG 0
|
|
#endif
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include "smc91x.h"
|
|
|
|
#ifndef SMC_NOWAIT
|
|
# define SMC_NOWAIT 0
|
|
#endif
|
|
static int nowait = SMC_NOWAIT;
|
|
module_param(nowait, int, 0400);
|
|
MODULE_PARM_DESC(nowait, "set to 1 for no wait state");
|
|
|
|
/*
|
|
* Transmit timeout, default 5 seconds.
|
|
*/
|
|
static int watchdog = 1000;
|
|
module_param(watchdog, int, 0400);
|
|
MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:smc91x");
|
|
|
|
/*
|
|
* The internal workings of the driver. If you are changing anything
|
|
* here with the SMC stuff, you should have the datasheet and know
|
|
* what you are doing.
|
|
*/
|
|
#define CARDNAME "smc91x"
|
|
|
|
/*
|
|
* Use power-down feature of the chip
|
|
*/
|
|
#define POWER_DOWN 1
|
|
|
|
/*
|
|
* Wait time for memory to be free. This probably shouldn't be
|
|
* tuned that much, as waiting for this means nothing else happens
|
|
* in the system
|
|
*/
|
|
#define MEMORY_WAIT_TIME 16
|
|
|
|
/*
|
|
* The maximum number of processing loops allowed for each call to the
|
|
* IRQ handler.
|
|
*/
|
|
#define MAX_IRQ_LOOPS 8
|
|
|
|
/*
|
|
* This selects whether TX packets are sent one by one to the SMC91x internal
|
|
* memory and throttled until transmission completes. This may prevent
|
|
* RX overruns a litle by keeping much of the memory free for RX packets
|
|
* but to the expense of reduced TX throughput and increased IRQ overhead.
|
|
* Note this is not a cure for a too slow data bus or too high IRQ latency.
|
|
*/
|
|
#define THROTTLE_TX_PKTS 0
|
|
|
|
/*
|
|
* The MII clock high/low times. 2x this number gives the MII clock period
|
|
* in microseconds. (was 50, but this gives 6.4ms for each MII transaction!)
|
|
*/
|
|
#define MII_DELAY 1
|
|
|
|
#define DBG(n, dev, fmt, ...) \
|
|
do { \
|
|
if (SMC_DEBUG >= (n)) \
|
|
netdev_dbg(dev, fmt, ##__VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#define PRINTK(dev, fmt, ...) \
|
|
do { \
|
|
if (SMC_DEBUG > 0) \
|
|
netdev_info(dev, fmt, ##__VA_ARGS__); \
|
|
else \
|
|
netdev_dbg(dev, fmt, ##__VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#if SMC_DEBUG > 3
|
|
static void PRINT_PKT(u_char *buf, int length)
|
|
{
|
|
int i;
|
|
int remainder;
|
|
int lines;
|
|
|
|
lines = length / 16;
|
|
remainder = length % 16;
|
|
|
|
for (i = 0; i < lines ; i ++) {
|
|
int cur;
|
|
printk(KERN_DEBUG);
|
|
for (cur = 0; cur < 8; cur++) {
|
|
u_char a, b;
|
|
a = *buf++;
|
|
b = *buf++;
|
|
pr_cont("%02x%02x ", a, b);
|
|
}
|
|
pr_cont("\n");
|
|
}
|
|
printk(KERN_DEBUG);
|
|
for (i = 0; i < remainder/2 ; i++) {
|
|
u_char a, b;
|
|
a = *buf++;
|
|
b = *buf++;
|
|
pr_cont("%02x%02x ", a, b);
|
|
}
|
|
pr_cont("\n");
|
|
}
|
|
#else
|
|
static inline void PRINT_PKT(u_char *buf, int length) { }
|
|
#endif
|
|
|
|
|
|
/* this enables an interrupt in the interrupt mask register */
|
|
#define SMC_ENABLE_INT(lp, x) do { \
|
|
unsigned char mask; \
|
|
unsigned long smc_enable_flags; \
|
|
spin_lock_irqsave(&lp->lock, smc_enable_flags); \
|
|
mask = SMC_GET_INT_MASK(lp); \
|
|
mask |= (x); \
|
|
SMC_SET_INT_MASK(lp, mask); \
|
|
spin_unlock_irqrestore(&lp->lock, smc_enable_flags); \
|
|
} while (0)
|
|
|
|
/* this disables an interrupt from the interrupt mask register */
|
|
#define SMC_DISABLE_INT(lp, x) do { \
|
|
unsigned char mask; \
|
|
unsigned long smc_disable_flags; \
|
|
spin_lock_irqsave(&lp->lock, smc_disable_flags); \
|
|
mask = SMC_GET_INT_MASK(lp); \
|
|
mask &= ~(x); \
|
|
SMC_SET_INT_MASK(lp, mask); \
|
|
spin_unlock_irqrestore(&lp->lock, smc_disable_flags); \
|
|
} while (0)
|
|
|
|
/*
|
|
* Wait while MMU is busy. This is usually in the order of a few nanosecs
|
|
* if at all, but let's avoid deadlocking the system if the hardware
|
|
* decides to go south.
|
|
*/
|
|
#define SMC_WAIT_MMU_BUSY(lp) do { \
|
|
if (unlikely(SMC_GET_MMU_CMD(lp) & MC_BUSY)) { \
|
|
unsigned long timeout = jiffies + 2; \
|
|
while (SMC_GET_MMU_CMD(lp) & MC_BUSY) { \
|
|
if (time_after(jiffies, timeout)) { \
|
|
netdev_dbg(dev, "timeout %s line %d\n", \
|
|
__FILE__, __LINE__); \
|
|
break; \
|
|
} \
|
|
cpu_relax(); \
|
|
} \
|
|
} \
|
|
} while (0)
|
|
|
|
|
|
/*
|
|
* this does a soft reset on the device
|
|
*/
|
|
static void smc_reset(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int ctl, cfg;
|
|
struct sk_buff *pending_skb;
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
/* Disable all interrupts, block TX tasklet */
|
|
spin_lock_irq(&lp->lock);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
SMC_SET_INT_MASK(lp, 0);
|
|
pending_skb = lp->pending_tx_skb;
|
|
lp->pending_tx_skb = NULL;
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
/* free any pending tx skb */
|
|
if (pending_skb) {
|
|
dev_kfree_skb(pending_skb);
|
|
dev->stats.tx_errors++;
|
|
dev->stats.tx_aborted_errors++;
|
|
}
|
|
|
|
/*
|
|
* This resets the registers mostly to defaults, but doesn't
|
|
* affect EEPROM. That seems unnecessary
|
|
*/
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_RCR(lp, RCR_SOFTRST);
|
|
|
|
/*
|
|
* Setup the Configuration Register
|
|
* This is necessary because the CONFIG_REG is not affected
|
|
* by a soft reset
|
|
*/
|
|
SMC_SELECT_BANK(lp, 1);
|
|
|
|
cfg = CONFIG_DEFAULT;
|
|
|
|
/*
|
|
* Setup for fast accesses if requested. If the card/system
|
|
* can't handle it then there will be no recovery except for
|
|
* a hard reset or power cycle
|
|
*/
|
|
if (lp->cfg.flags & SMC91X_NOWAIT)
|
|
cfg |= CONFIG_NO_WAIT;
|
|
|
|
/*
|
|
* Release from possible power-down state
|
|
* Configuration register is not affected by Soft Reset
|
|
*/
|
|
cfg |= CONFIG_EPH_POWER_EN;
|
|
|
|
SMC_SET_CONFIG(lp, cfg);
|
|
|
|
/* this should pause enough for the chip to be happy */
|
|
/*
|
|
* elaborate? What does the chip _need_? --jgarzik
|
|
*
|
|
* This seems to be undocumented, but something the original
|
|
* driver(s) have always done. Suspect undocumented timing
|
|
* info/determined empirically. --rmk
|
|
*/
|
|
udelay(1);
|
|
|
|
/* Disable transmit and receive functionality */
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_RCR(lp, RCR_CLEAR);
|
|
SMC_SET_TCR(lp, TCR_CLEAR);
|
|
|
|
SMC_SELECT_BANK(lp, 1);
|
|
ctl = SMC_GET_CTL(lp) | CTL_LE_ENABLE;
|
|
|
|
/*
|
|
* Set the control register to automatically release successfully
|
|
* transmitted packets, to make the best use out of our limited
|
|
* memory
|
|
*/
|
|
if(!THROTTLE_TX_PKTS)
|
|
ctl |= CTL_AUTO_RELEASE;
|
|
else
|
|
ctl &= ~CTL_AUTO_RELEASE;
|
|
SMC_SET_CTL(lp, ctl);
|
|
|
|
/* Reset the MMU */
|
|
SMC_SELECT_BANK(lp, 2);
|
|
SMC_SET_MMU_CMD(lp, MC_RESET);
|
|
SMC_WAIT_MMU_BUSY(lp);
|
|
}
|
|
|
|
/*
|
|
* Enable Interrupts, Receive, and Transmit
|
|
*/
|
|
static void smc_enable(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
int mask;
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
/* see the header file for options in TCR/RCR DEFAULT */
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_TCR(lp, lp->tcr_cur_mode);
|
|
SMC_SET_RCR(lp, lp->rcr_cur_mode);
|
|
|
|
SMC_SELECT_BANK(lp, 1);
|
|
SMC_SET_MAC_ADDR(lp, dev->dev_addr);
|
|
|
|
/* now, enable interrupts */
|
|
mask = IM_EPH_INT|IM_RX_OVRN_INT|IM_RCV_INT;
|
|
if (lp->version >= (CHIP_91100 << 4))
|
|
mask |= IM_MDINT;
|
|
SMC_SELECT_BANK(lp, 2);
|
|
SMC_SET_INT_MASK(lp, mask);
|
|
|
|
/*
|
|
* From this point the register bank must _NOT_ be switched away
|
|
* to something else than bank 2 without proper locking against
|
|
* races with any tasklet or interrupt handlers until smc_shutdown()
|
|
* or smc_reset() is called.
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* this puts the device in an inactive state
|
|
*/
|
|
static void smc_shutdown(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
struct sk_buff *pending_skb;
|
|
|
|
DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
|
|
|
|
/* no more interrupts for me */
|
|
spin_lock_irq(&lp->lock);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
SMC_SET_INT_MASK(lp, 0);
|
|
pending_skb = lp->pending_tx_skb;
|
|
lp->pending_tx_skb = NULL;
|
|
spin_unlock_irq(&lp->lock);
|
|
if (pending_skb)
|
|
dev_kfree_skb(pending_skb);
|
|
|
|
/* and tell the card to stay away from that nasty outside world */
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_RCR(lp, RCR_CLEAR);
|
|
SMC_SET_TCR(lp, TCR_CLEAR);
|
|
|
|
#ifdef POWER_DOWN
|
|
/* finally, shut the chip down */
|
|
SMC_SELECT_BANK(lp, 1);
|
|
SMC_SET_CONFIG(lp, SMC_GET_CONFIG(lp) & ~CONFIG_EPH_POWER_EN);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* This is the procedure to handle the receipt of a packet.
|
|
*/
|
|
static inline void smc_rcv(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int packet_number, status, packet_len;
|
|
|
|
DBG(3, dev, "%s\n", __func__);
|
|
|
|
packet_number = SMC_GET_RXFIFO(lp);
|
|
if (unlikely(packet_number & RXFIFO_REMPTY)) {
|
|
PRINTK(dev, "smc_rcv with nothing on FIFO.\n");
|
|
return;
|
|
}
|
|
|
|
/* read from start of packet */
|
|
SMC_SET_PTR(lp, PTR_READ | PTR_RCV | PTR_AUTOINC);
|
|
|
|
/* First two words are status and packet length */
|
|
SMC_GET_PKT_HDR(lp, status, packet_len);
|
|
packet_len &= 0x07ff; /* mask off top bits */
|
|
DBG(2, dev, "RX PNR 0x%x STATUS 0x%04x LENGTH 0x%04x (%d)\n",
|
|
packet_number, status, packet_len, packet_len);
|
|
|
|
back:
|
|
if (unlikely(packet_len < 6 || status & RS_ERRORS)) {
|
|
if (status & RS_TOOLONG && packet_len <= (1514 + 4 + 6)) {
|
|
/* accept VLAN packets */
|
|
status &= ~RS_TOOLONG;
|
|
goto back;
|
|
}
|
|
if (packet_len < 6) {
|
|
/* bloody hardware */
|
|
netdev_err(dev, "fubar (rxlen %u status %x\n",
|
|
packet_len, status);
|
|
status |= RS_TOOSHORT;
|
|
}
|
|
SMC_WAIT_MMU_BUSY(lp);
|
|
SMC_SET_MMU_CMD(lp, MC_RELEASE);
|
|
dev->stats.rx_errors++;
|
|
if (status & RS_ALGNERR)
|
|
dev->stats.rx_frame_errors++;
|
|
if (status & (RS_TOOSHORT | RS_TOOLONG))
|
|
dev->stats.rx_length_errors++;
|
|
if (status & RS_BADCRC)
|
|
dev->stats.rx_crc_errors++;
|
|
} else {
|
|
struct sk_buff *skb;
|
|
unsigned char *data;
|
|
unsigned int data_len;
|
|
|
|
/* set multicast stats */
|
|
if (status & RS_MULTICAST)
|
|
dev->stats.multicast++;
|
|
|
|
/*
|
|
* Actual payload is packet_len - 6 (or 5 if odd byte).
|
|
* We want skb_reserve(2) and the final ctrl word
|
|
* (2 bytes, possibly containing the payload odd byte).
|
|
* Furthermore, we add 2 bytes to allow rounding up to
|
|
* multiple of 4 bytes on 32 bit buses.
|
|
* Hence packet_len - 6 + 2 + 2 + 2.
|
|
*/
|
|
skb = netdev_alloc_skb(dev, packet_len);
|
|
if (unlikely(skb == NULL)) {
|
|
SMC_WAIT_MMU_BUSY(lp);
|
|
SMC_SET_MMU_CMD(lp, MC_RELEASE);
|
|
dev->stats.rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
/* Align IP header to 32 bits */
|
|
skb_reserve(skb, 2);
|
|
|
|
/* BUG: the LAN91C111 rev A never sets this bit. Force it. */
|
|
if (lp->version == 0x90)
|
|
status |= RS_ODDFRAME;
|
|
|
|
/*
|
|
* If odd length: packet_len - 5,
|
|
* otherwise packet_len - 6.
|
|
* With the trailing ctrl byte it's packet_len - 4.
|
|
*/
|
|
data_len = packet_len - ((status & RS_ODDFRAME) ? 5 : 6);
|
|
data = skb_put(skb, data_len);
|
|
SMC_PULL_DATA(lp, data, packet_len - 4);
|
|
|
|
SMC_WAIT_MMU_BUSY(lp);
|
|
SMC_SET_MMU_CMD(lp, MC_RELEASE);
|
|
|
|
PRINT_PKT(data, packet_len - 4);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += data_len;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SMP
|
|
/*
|
|
* On SMP we have the following problem:
|
|
*
|
|
* A = smc_hardware_send_pkt()
|
|
* B = smc_hard_start_xmit()
|
|
* C = smc_interrupt()
|
|
*
|
|
* A and B can never be executed simultaneously. However, at least on UP,
|
|
* it is possible (and even desirable) for C to interrupt execution of
|
|
* A or B in order to have better RX reliability and avoid overruns.
|
|
* C, just like A and B, must have exclusive access to the chip and
|
|
* each of them must lock against any other concurrent access.
|
|
* Unfortunately this is not possible to have C suspend execution of A or
|
|
* B taking place on another CPU. On UP this is no an issue since A and B
|
|
* are run from softirq context and C from hard IRQ context, and there is
|
|
* no other CPU where concurrent access can happen.
|
|
* If ever there is a way to force at least B and C to always be executed
|
|
* on the same CPU then we could use read/write locks to protect against
|
|
* any other concurrent access and C would always interrupt B. But life
|
|
* isn't that easy in a SMP world...
|
|
*/
|
|
#define smc_special_trylock(lock, flags) \
|
|
({ \
|
|
int __ret; \
|
|
local_irq_save(flags); \
|
|
__ret = spin_trylock(lock); \
|
|
if (!__ret) \
|
|
local_irq_restore(flags); \
|
|
__ret; \
|
|
})
|
|
#define smc_special_lock(lock, flags) spin_lock_irqsave(lock, flags)
|
|
#define smc_special_unlock(lock, flags) spin_unlock_irqrestore(lock, flags)
|
|
#else
|
|
#define smc_special_trylock(lock, flags) (flags == flags)
|
|
#define smc_special_lock(lock, flags) do { flags = 0; } while (0)
|
|
#define smc_special_unlock(lock, flags) do { flags = 0; } while (0)
|
|
#endif
|
|
|
|
/*
|
|
* This is called to actually send a packet to the chip.
|
|
*/
|
|
static void smc_hardware_send_pkt(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
struct sk_buff *skb;
|
|
unsigned int packet_no, len;
|
|
unsigned char *buf;
|
|
unsigned long flags;
|
|
|
|
DBG(3, dev, "%s\n", __func__);
|
|
|
|
if (!smc_special_trylock(&lp->lock, flags)) {
|
|
netif_stop_queue(dev);
|
|
tasklet_schedule(&lp->tx_task);
|
|
return;
|
|
}
|
|
|
|
skb = lp->pending_tx_skb;
|
|
if (unlikely(!skb)) {
|
|
smc_special_unlock(&lp->lock, flags);
|
|
return;
|
|
}
|
|
lp->pending_tx_skb = NULL;
|
|
|
|
packet_no = SMC_GET_AR(lp);
|
|
if (unlikely(packet_no & AR_FAILED)) {
|
|
netdev_err(dev, "Memory allocation failed.\n");
|
|
dev->stats.tx_errors++;
|
|
dev->stats.tx_fifo_errors++;
|
|
smc_special_unlock(&lp->lock, flags);
|
|
goto done;
|
|
}
|
|
|
|
/* point to the beginning of the packet */
|
|
SMC_SET_PN(lp, packet_no);
|
|
SMC_SET_PTR(lp, PTR_AUTOINC);
|
|
|
|
buf = skb->data;
|
|
len = skb->len;
|
|
DBG(2, dev, "TX PNR 0x%x LENGTH 0x%04x (%d) BUF 0x%p\n",
|
|
packet_no, len, len, buf);
|
|
PRINT_PKT(buf, len);
|
|
|
|
/*
|
|
* Send the packet length (+6 for status words, length, and ctl.
|
|
* The card will pad to 64 bytes with zeroes if packet is too small.
|
|
*/
|
|
SMC_PUT_PKT_HDR(lp, 0, len + 6);
|
|
|
|
/* send the actual data */
|
|
SMC_PUSH_DATA(lp, buf, len & ~1);
|
|
|
|
/* Send final ctl word with the last byte if there is one */
|
|
SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG(lp));
|
|
|
|
/*
|
|
* If THROTTLE_TX_PKTS is set, we stop the queue here. This will
|
|
* have the effect of having at most one packet queued for TX
|
|
* in the chip's memory at all time.
|
|
*
|
|
* If THROTTLE_TX_PKTS is not set then the queue is stopped only
|
|
* when memory allocation (MC_ALLOC) does not succeed right away.
|
|
*/
|
|
if (THROTTLE_TX_PKTS)
|
|
netif_stop_queue(dev);
|
|
|
|
/* queue the packet for TX */
|
|
SMC_SET_MMU_CMD(lp, MC_ENQUEUE);
|
|
smc_special_unlock(&lp->lock, flags);
|
|
|
|
dev->trans_start = jiffies;
|
|
dev->stats.tx_packets++;
|
|
dev->stats.tx_bytes += len;
|
|
|
|
SMC_ENABLE_INT(lp, IM_TX_INT | IM_TX_EMPTY_INT);
|
|
|
|
done: if (!THROTTLE_TX_PKTS)
|
|
netif_wake_queue(dev);
|
|
|
|
dev_consume_skb_any(skb);
|
|
}
|
|
|
|
/*
|
|
* Since I am not sure if I will have enough room in the chip's ram
|
|
* to store the packet, I call this routine which either sends it
|
|
* now, or set the card to generates an interrupt when ready
|
|
* for the packet.
|
|
*/
|
|
static int smc_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int numPages, poll_count, status;
|
|
unsigned long flags;
|
|
|
|
DBG(3, dev, "%s\n", __func__);
|
|
|
|
BUG_ON(lp->pending_tx_skb != NULL);
|
|
|
|
/*
|
|
* The MMU wants the number of pages to be the number of 256 bytes
|
|
* 'pages', minus 1 (since a packet can't ever have 0 pages :))
|
|
*
|
|
* The 91C111 ignores the size bits, but earlier models don't.
|
|
*
|
|
* Pkt size for allocating is data length +6 (for additional status
|
|
* words, length and ctl)
|
|
*
|
|
* If odd size then last byte is included in ctl word.
|
|
*/
|
|
numPages = ((skb->len & ~1) + (6 - 1)) >> 8;
|
|
if (unlikely(numPages > 7)) {
|
|
netdev_warn(dev, "Far too big packet error.\n");
|
|
dev->stats.tx_errors++;
|
|
dev->stats.tx_dropped++;
|
|
dev_kfree_skb_any(skb);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
smc_special_lock(&lp->lock, flags);
|
|
|
|
/* now, try to allocate the memory */
|
|
SMC_SET_MMU_CMD(lp, MC_ALLOC | numPages);
|
|
|
|
/*
|
|
* Poll the chip for a short amount of time in case the
|
|
* allocation succeeds quickly.
|
|
*/
|
|
poll_count = MEMORY_WAIT_TIME;
|
|
do {
|
|
status = SMC_GET_INT(lp);
|
|
if (status & IM_ALLOC_INT) {
|
|
SMC_ACK_INT(lp, IM_ALLOC_INT);
|
|
break;
|
|
}
|
|
} while (--poll_count);
|
|
|
|
smc_special_unlock(&lp->lock, flags);
|
|
|
|
lp->pending_tx_skb = skb;
|
|
if (!poll_count) {
|
|
/* oh well, wait until the chip finds memory later */
|
|
netif_stop_queue(dev);
|
|
DBG(2, dev, "TX memory allocation deferred.\n");
|
|
SMC_ENABLE_INT(lp, IM_ALLOC_INT);
|
|
} else {
|
|
/*
|
|
* Allocation succeeded: push packet to the chip's own memory
|
|
* immediately.
|
|
*/
|
|
smc_hardware_send_pkt((unsigned long)dev);
|
|
}
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/*
|
|
* This handles a TX interrupt, which is only called when:
|
|
* - a TX error occurred, or
|
|
* - CTL_AUTO_RELEASE is not set and TX of a packet completed.
|
|
*/
|
|
static void smc_tx(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int saved_packet, packet_no, tx_status, pkt_len;
|
|
|
|
DBG(3, dev, "%s\n", __func__);
|
|
|
|
/* If the TX FIFO is empty then nothing to do */
|
|
packet_no = SMC_GET_TXFIFO(lp);
|
|
if (unlikely(packet_no & TXFIFO_TEMPTY)) {
|
|
PRINTK(dev, "smc_tx with nothing on FIFO.\n");
|
|
return;
|
|
}
|
|
|
|
/* select packet to read from */
|
|
saved_packet = SMC_GET_PN(lp);
|
|
SMC_SET_PN(lp, packet_no);
|
|
|
|
/* read the first word (status word) from this packet */
|
|
SMC_SET_PTR(lp, PTR_AUTOINC | PTR_READ);
|
|
SMC_GET_PKT_HDR(lp, tx_status, pkt_len);
|
|
DBG(2, dev, "TX STATUS 0x%04x PNR 0x%02x\n",
|
|
tx_status, packet_no);
|
|
|
|
if (!(tx_status & ES_TX_SUC))
|
|
dev->stats.tx_errors++;
|
|
|
|
if (tx_status & ES_LOSTCARR)
|
|
dev->stats.tx_carrier_errors++;
|
|
|
|
if (tx_status & (ES_LATCOL | ES_16COL)) {
|
|
PRINTK(dev, "%s occurred on last xmit\n",
|
|
(tx_status & ES_LATCOL) ?
|
|
"late collision" : "too many collisions");
|
|
dev->stats.tx_window_errors++;
|
|
if (!(dev->stats.tx_window_errors & 63) && net_ratelimit()) {
|
|
netdev_info(dev, "unexpectedly large number of bad collisions. Please check duplex setting.\n");
|
|
}
|
|
}
|
|
|
|
/* kill the packet */
|
|
SMC_WAIT_MMU_BUSY(lp);
|
|
SMC_SET_MMU_CMD(lp, MC_FREEPKT);
|
|
|
|
/* Don't restore Packet Number Reg until busy bit is cleared */
|
|
SMC_WAIT_MMU_BUSY(lp);
|
|
SMC_SET_PN(lp, saved_packet);
|
|
|
|
/* re-enable transmit */
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_TCR(lp, lp->tcr_cur_mode);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
}
|
|
|
|
|
|
/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/
|
|
|
|
static void smc_mii_out(struct net_device *dev, unsigned int val, int bits)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int mii_reg, mask;
|
|
|
|
mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
|
|
mii_reg |= MII_MDOE;
|
|
|
|
for (mask = 1 << (bits - 1); mask; mask >>= 1) {
|
|
if (val & mask)
|
|
mii_reg |= MII_MDO;
|
|
else
|
|
mii_reg &= ~MII_MDO;
|
|
|
|
SMC_SET_MII(lp, mii_reg);
|
|
udelay(MII_DELAY);
|
|
SMC_SET_MII(lp, mii_reg | MII_MCLK);
|
|
udelay(MII_DELAY);
|
|
}
|
|
}
|
|
|
|
static unsigned int smc_mii_in(struct net_device *dev, int bits)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int mii_reg, mask, val;
|
|
|
|
mii_reg = SMC_GET_MII(lp) & ~(MII_MCLK | MII_MDOE | MII_MDO);
|
|
SMC_SET_MII(lp, mii_reg);
|
|
|
|
for (mask = 1 << (bits - 1), val = 0; mask; mask >>= 1) {
|
|
if (SMC_GET_MII(lp) & MII_MDI)
|
|
val |= mask;
|
|
|
|
SMC_SET_MII(lp, mii_reg);
|
|
udelay(MII_DELAY);
|
|
SMC_SET_MII(lp, mii_reg | MII_MCLK);
|
|
udelay(MII_DELAY);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* Reads a register from the MII Management serial interface
|
|
*/
|
|
static int smc_phy_read(struct net_device *dev, int phyaddr, int phyreg)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int phydata;
|
|
|
|
SMC_SELECT_BANK(lp, 3);
|
|
|
|
/* Idle - 32 ones */
|
|
smc_mii_out(dev, 0xffffffff, 32);
|
|
|
|
/* Start code (01) + read (10) + phyaddr + phyreg */
|
|
smc_mii_out(dev, 6 << 10 | phyaddr << 5 | phyreg, 14);
|
|
|
|
/* Turnaround (2bits) + phydata */
|
|
phydata = smc_mii_in(dev, 18);
|
|
|
|
/* Return to idle state */
|
|
SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
|
|
|
|
DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
|
|
__func__, phyaddr, phyreg, phydata);
|
|
|
|
SMC_SELECT_BANK(lp, 2);
|
|
return phydata;
|
|
}
|
|
|
|
/*
|
|
* Writes a register to the MII Management serial interface
|
|
*/
|
|
static void smc_phy_write(struct net_device *dev, int phyaddr, int phyreg,
|
|
int phydata)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
|
|
SMC_SELECT_BANK(lp, 3);
|
|
|
|
/* Idle - 32 ones */
|
|
smc_mii_out(dev, 0xffffffff, 32);
|
|
|
|
/* Start code (01) + write (01) + phyaddr + phyreg + turnaround + phydata */
|
|
smc_mii_out(dev, 5 << 28 | phyaddr << 23 | phyreg << 18 | 2 << 16 | phydata, 32);
|
|
|
|
/* Return to idle state */
|
|
SMC_SET_MII(lp, SMC_GET_MII(lp) & ~(MII_MCLK|MII_MDOE|MII_MDO));
|
|
|
|
DBG(3, dev, "%s: phyaddr=0x%x, phyreg=0x%x, phydata=0x%x\n",
|
|
__func__, phyaddr, phyreg, phydata);
|
|
|
|
SMC_SELECT_BANK(lp, 2);
|
|
}
|
|
|
|
/*
|
|
* Finds and reports the PHY address
|
|
*/
|
|
static void smc_phy_detect(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
int phyaddr;
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
lp->phy_type = 0;
|
|
|
|
/*
|
|
* Scan all 32 PHY addresses if necessary, starting at
|
|
* PHY#1 to PHY#31, and then PHY#0 last.
|
|
*/
|
|
for (phyaddr = 1; phyaddr < 33; ++phyaddr) {
|
|
unsigned int id1, id2;
|
|
|
|
/* Read the PHY identifiers */
|
|
id1 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID1);
|
|
id2 = smc_phy_read(dev, phyaddr & 31, MII_PHYSID2);
|
|
|
|
DBG(3, dev, "phy_id1=0x%x, phy_id2=0x%x\n",
|
|
id1, id2);
|
|
|
|
/* Make sure it is a valid identifier */
|
|
if (id1 != 0x0000 && id1 != 0xffff && id1 != 0x8000 &&
|
|
id2 != 0x0000 && id2 != 0xffff && id2 != 0x8000) {
|
|
/* Save the PHY's address */
|
|
lp->mii.phy_id = phyaddr & 31;
|
|
lp->phy_type = id1 << 16 | id2;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Sets the PHY to a configuration as determined by the user
|
|
*/
|
|
static int smc_phy_fixed(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
int phyaddr = lp->mii.phy_id;
|
|
int bmcr, cfg1;
|
|
|
|
DBG(3, dev, "%s\n", __func__);
|
|
|
|
/* Enter Link Disable state */
|
|
cfg1 = smc_phy_read(dev, phyaddr, PHY_CFG1_REG);
|
|
cfg1 |= PHY_CFG1_LNKDIS;
|
|
smc_phy_write(dev, phyaddr, PHY_CFG1_REG, cfg1);
|
|
|
|
/*
|
|
* Set our fixed capabilities
|
|
* Disable auto-negotiation
|
|
*/
|
|
bmcr = 0;
|
|
|
|
if (lp->ctl_rfduplx)
|
|
bmcr |= BMCR_FULLDPLX;
|
|
|
|
if (lp->ctl_rspeed == 100)
|
|
bmcr |= BMCR_SPEED100;
|
|
|
|
/* Write our capabilities to the phy control register */
|
|
smc_phy_write(dev, phyaddr, MII_BMCR, bmcr);
|
|
|
|
/* Re-Configure the Receive/Phy Control register */
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_RPC(lp, lp->rpc_cur_mode);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* smc_phy_reset - reset the phy
|
|
* @dev: net device
|
|
* @phy: phy address
|
|
*
|
|
* Issue a software reset for the specified PHY and
|
|
* wait up to 100ms for the reset to complete. We should
|
|
* not access the PHY for 50ms after issuing the reset.
|
|
*
|
|
* The time to wait appears to be dependent on the PHY.
|
|
*
|
|
* Must be called with lp->lock locked.
|
|
*/
|
|
static int smc_phy_reset(struct net_device *dev, int phy)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
unsigned int bmcr;
|
|
int timeout;
|
|
|
|
smc_phy_write(dev, phy, MII_BMCR, BMCR_RESET);
|
|
|
|
for (timeout = 2; timeout; timeout--) {
|
|
spin_unlock_irq(&lp->lock);
|
|
msleep(50);
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
bmcr = smc_phy_read(dev, phy, MII_BMCR);
|
|
if (!(bmcr & BMCR_RESET))
|
|
break;
|
|
}
|
|
|
|
return bmcr & BMCR_RESET;
|
|
}
|
|
|
|
/**
|
|
* smc_phy_powerdown - powerdown phy
|
|
* @dev: net device
|
|
*
|
|
* Power down the specified PHY
|
|
*/
|
|
static void smc_phy_powerdown(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
unsigned int bmcr;
|
|
int phy = lp->mii.phy_id;
|
|
|
|
if (lp->phy_type == 0)
|
|
return;
|
|
|
|
/* We need to ensure that no calls to smc_phy_configure are
|
|
pending.
|
|
*/
|
|
cancel_work_sync(&lp->phy_configure);
|
|
|
|
bmcr = smc_phy_read(dev, phy, MII_BMCR);
|
|
smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
|
|
}
|
|
|
|
/**
|
|
* smc_phy_check_media - check the media status and adjust TCR
|
|
* @dev: net device
|
|
* @init: set true for initialisation
|
|
*
|
|
* Select duplex mode depending on negotiation state. This
|
|
* also updates our carrier state.
|
|
*/
|
|
static void smc_phy_check_media(struct net_device *dev, int init)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
|
|
if (mii_check_media(&lp->mii, netif_msg_link(lp), init)) {
|
|
/* duplex state has changed */
|
|
if (lp->mii.full_duplex) {
|
|
lp->tcr_cur_mode |= TCR_SWFDUP;
|
|
} else {
|
|
lp->tcr_cur_mode &= ~TCR_SWFDUP;
|
|
}
|
|
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_TCR(lp, lp->tcr_cur_mode);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Configures the specified PHY through the MII management interface
|
|
* using Autonegotiation.
|
|
* Calls smc_phy_fixed() if the user has requested a certain config.
|
|
* If RPC ANEG bit is set, the media selection is dependent purely on
|
|
* the selection by the MII (either in the MII BMCR reg or the result
|
|
* of autonegotiation.) If the RPC ANEG bit is cleared, the selection
|
|
* is controlled by the RPC SPEED and RPC DPLX bits.
|
|
*/
|
|
static void smc_phy_configure(struct work_struct *work)
|
|
{
|
|
struct smc_local *lp =
|
|
container_of(work, struct smc_local, phy_configure);
|
|
struct net_device *dev = lp->dev;
|
|
void __iomem *ioaddr = lp->base;
|
|
int phyaddr = lp->mii.phy_id;
|
|
int my_phy_caps; /* My PHY capabilities */
|
|
int my_ad_caps; /* My Advertised capabilities */
|
|
int status;
|
|
|
|
DBG(3, dev, "smc_program_phy()\n");
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
/*
|
|
* We should not be called if phy_type is zero.
|
|
*/
|
|
if (lp->phy_type == 0)
|
|
goto smc_phy_configure_exit;
|
|
|
|
if (smc_phy_reset(dev, phyaddr)) {
|
|
netdev_info(dev, "PHY reset timed out\n");
|
|
goto smc_phy_configure_exit;
|
|
}
|
|
|
|
/*
|
|
* Enable PHY Interrupts (for register 18)
|
|
* Interrupts listed here are disabled
|
|
*/
|
|
smc_phy_write(dev, phyaddr, PHY_MASK_REG,
|
|
PHY_INT_LOSSSYNC | PHY_INT_CWRD | PHY_INT_SSD |
|
|
PHY_INT_ESD | PHY_INT_RPOL | PHY_INT_JAB |
|
|
PHY_INT_SPDDET | PHY_INT_DPLXDET);
|
|
|
|
/* Configure the Receive/Phy Control register */
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_RPC(lp, lp->rpc_cur_mode);
|
|
|
|
/* If the user requested no auto neg, then go set his request */
|
|
if (lp->mii.force_media) {
|
|
smc_phy_fixed(dev);
|
|
goto smc_phy_configure_exit;
|
|
}
|
|
|
|
/* Copy our capabilities from MII_BMSR to MII_ADVERTISE */
|
|
my_phy_caps = smc_phy_read(dev, phyaddr, MII_BMSR);
|
|
|
|
if (!(my_phy_caps & BMSR_ANEGCAPABLE)) {
|
|
netdev_info(dev, "Auto negotiation NOT supported\n");
|
|
smc_phy_fixed(dev);
|
|
goto smc_phy_configure_exit;
|
|
}
|
|
|
|
my_ad_caps = ADVERTISE_CSMA; /* I am CSMA capable */
|
|
|
|
if (my_phy_caps & BMSR_100BASE4)
|
|
my_ad_caps |= ADVERTISE_100BASE4;
|
|
if (my_phy_caps & BMSR_100FULL)
|
|
my_ad_caps |= ADVERTISE_100FULL;
|
|
if (my_phy_caps & BMSR_100HALF)
|
|
my_ad_caps |= ADVERTISE_100HALF;
|
|
if (my_phy_caps & BMSR_10FULL)
|
|
my_ad_caps |= ADVERTISE_10FULL;
|
|
if (my_phy_caps & BMSR_10HALF)
|
|
my_ad_caps |= ADVERTISE_10HALF;
|
|
|
|
/* Disable capabilities not selected by our user */
|
|
if (lp->ctl_rspeed != 100)
|
|
my_ad_caps &= ~(ADVERTISE_100BASE4|ADVERTISE_100FULL|ADVERTISE_100HALF);
|
|
|
|
if (!lp->ctl_rfduplx)
|
|
my_ad_caps &= ~(ADVERTISE_100FULL|ADVERTISE_10FULL);
|
|
|
|
/* Update our Auto-Neg Advertisement Register */
|
|
smc_phy_write(dev, phyaddr, MII_ADVERTISE, my_ad_caps);
|
|
lp->mii.advertising = my_ad_caps;
|
|
|
|
/*
|
|
* Read the register back. Without this, it appears that when
|
|
* auto-negotiation is restarted, sometimes it isn't ready and
|
|
* the link does not come up.
|
|
*/
|
|
status = smc_phy_read(dev, phyaddr, MII_ADVERTISE);
|
|
|
|
DBG(2, dev, "phy caps=%x\n", my_phy_caps);
|
|
DBG(2, dev, "phy advertised caps=%x\n", my_ad_caps);
|
|
|
|
/* Restart auto-negotiation process in order to advertise my caps */
|
|
smc_phy_write(dev, phyaddr, MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART);
|
|
|
|
smc_phy_check_media(dev, 1);
|
|
|
|
smc_phy_configure_exit:
|
|
SMC_SELECT_BANK(lp, 2);
|
|
spin_unlock_irq(&lp->lock);
|
|
}
|
|
|
|
/*
|
|
* smc_phy_interrupt
|
|
*
|
|
* Purpose: Handle interrupts relating to PHY register 18. This is
|
|
* called from the "hard" interrupt handler under our private spinlock.
|
|
*/
|
|
static void smc_phy_interrupt(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
int phyaddr = lp->mii.phy_id;
|
|
int phy18;
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
if (lp->phy_type == 0)
|
|
return;
|
|
|
|
for(;;) {
|
|
smc_phy_check_media(dev, 0);
|
|
|
|
/* Read PHY Register 18, Status Output */
|
|
phy18 = smc_phy_read(dev, phyaddr, PHY_INT_REG);
|
|
if ((phy18 & PHY_INT_INT) == 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*--- END PHY CONTROL AND CONFIGURATION-------------------------------------*/
|
|
|
|
static void smc_10bt_check_media(struct net_device *dev, int init)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int old_carrier, new_carrier;
|
|
|
|
old_carrier = netif_carrier_ok(dev) ? 1 : 0;
|
|
|
|
SMC_SELECT_BANK(lp, 0);
|
|
new_carrier = (SMC_GET_EPH_STATUS(lp) & ES_LINK_OK) ? 1 : 0;
|
|
SMC_SELECT_BANK(lp, 2);
|
|
|
|
if (init || (old_carrier != new_carrier)) {
|
|
if (!new_carrier) {
|
|
netif_carrier_off(dev);
|
|
} else {
|
|
netif_carrier_on(dev);
|
|
}
|
|
if (netif_msg_link(lp))
|
|
netdev_info(dev, "link %s\n",
|
|
new_carrier ? "up" : "down");
|
|
}
|
|
}
|
|
|
|
static void smc_eph_interrupt(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned int ctl;
|
|
|
|
smc_10bt_check_media(dev, 0);
|
|
|
|
SMC_SELECT_BANK(lp, 1);
|
|
ctl = SMC_GET_CTL(lp);
|
|
SMC_SET_CTL(lp, ctl & ~CTL_LE_ENABLE);
|
|
SMC_SET_CTL(lp, ctl);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
}
|
|
|
|
/*
|
|
* This is the main routine of the driver, to handle the device when
|
|
* it needs some attention.
|
|
*/
|
|
static irqreturn_t smc_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
int status, mask, timeout, card_stats;
|
|
int saved_pointer;
|
|
|
|
DBG(3, dev, "%s\n", __func__);
|
|
|
|
spin_lock(&lp->lock);
|
|
|
|
/* A preamble may be used when there is a potential race
|
|
* between the interruptible transmit functions and this
|
|
* ISR. */
|
|
SMC_INTERRUPT_PREAMBLE;
|
|
|
|
saved_pointer = SMC_GET_PTR(lp);
|
|
mask = SMC_GET_INT_MASK(lp);
|
|
SMC_SET_INT_MASK(lp, 0);
|
|
|
|
/* set a timeout value, so I don't stay here forever */
|
|
timeout = MAX_IRQ_LOOPS;
|
|
|
|
do {
|
|
status = SMC_GET_INT(lp);
|
|
|
|
DBG(2, dev, "INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n",
|
|
status, mask,
|
|
({ int meminfo; SMC_SELECT_BANK(lp, 0);
|
|
meminfo = SMC_GET_MIR(lp);
|
|
SMC_SELECT_BANK(lp, 2); meminfo; }),
|
|
SMC_GET_FIFO(lp));
|
|
|
|
status &= mask;
|
|
if (!status)
|
|
break;
|
|
|
|
if (status & IM_TX_INT) {
|
|
/* do this before RX as it will free memory quickly */
|
|
DBG(3, dev, "TX int\n");
|
|
smc_tx(dev);
|
|
SMC_ACK_INT(lp, IM_TX_INT);
|
|
if (THROTTLE_TX_PKTS)
|
|
netif_wake_queue(dev);
|
|
} else if (status & IM_RCV_INT) {
|
|
DBG(3, dev, "RX irq\n");
|
|
smc_rcv(dev);
|
|
} else if (status & IM_ALLOC_INT) {
|
|
DBG(3, dev, "Allocation irq\n");
|
|
tasklet_hi_schedule(&lp->tx_task);
|
|
mask &= ~IM_ALLOC_INT;
|
|
} else if (status & IM_TX_EMPTY_INT) {
|
|
DBG(3, dev, "TX empty\n");
|
|
mask &= ~IM_TX_EMPTY_INT;
|
|
|
|
/* update stats */
|
|
SMC_SELECT_BANK(lp, 0);
|
|
card_stats = SMC_GET_COUNTER(lp);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
|
|
/* single collisions */
|
|
dev->stats.collisions += card_stats & 0xF;
|
|
card_stats >>= 4;
|
|
|
|
/* multiple collisions */
|
|
dev->stats.collisions += card_stats & 0xF;
|
|
} else if (status & IM_RX_OVRN_INT) {
|
|
DBG(1, dev, "RX overrun (EPH_ST 0x%04x)\n",
|
|
({ int eph_st; SMC_SELECT_BANK(lp, 0);
|
|
eph_st = SMC_GET_EPH_STATUS(lp);
|
|
SMC_SELECT_BANK(lp, 2); eph_st; }));
|
|
SMC_ACK_INT(lp, IM_RX_OVRN_INT);
|
|
dev->stats.rx_errors++;
|
|
dev->stats.rx_fifo_errors++;
|
|
} else if (status & IM_EPH_INT) {
|
|
smc_eph_interrupt(dev);
|
|
} else if (status & IM_MDINT) {
|
|
SMC_ACK_INT(lp, IM_MDINT);
|
|
smc_phy_interrupt(dev);
|
|
} else if (status & IM_ERCV_INT) {
|
|
SMC_ACK_INT(lp, IM_ERCV_INT);
|
|
PRINTK(dev, "UNSUPPORTED: ERCV INTERRUPT\n");
|
|
}
|
|
} while (--timeout);
|
|
|
|
/* restore register states */
|
|
SMC_SET_PTR(lp, saved_pointer);
|
|
SMC_SET_INT_MASK(lp, mask);
|
|
spin_unlock(&lp->lock);
|
|
|
|
#ifndef CONFIG_NET_POLL_CONTROLLER
|
|
if (timeout == MAX_IRQ_LOOPS)
|
|
PRINTK(dev, "spurious interrupt (mask = 0x%02x)\n",
|
|
mask);
|
|
#endif
|
|
DBG(3, dev, "Interrupt done (%d loops)\n",
|
|
MAX_IRQ_LOOPS - timeout);
|
|
|
|
/*
|
|
* We return IRQ_HANDLED unconditionally here even if there was
|
|
* nothing to do. There is a possibility that a packet might
|
|
* get enqueued into the chip right after TX_EMPTY_INT is raised
|
|
* but just before the CPU acknowledges the IRQ.
|
|
* Better take an unneeded IRQ in some occasions than complexifying
|
|
* the code for all cases.
|
|
*/
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
/*
|
|
* Polling receive - used by netconsole and other diagnostic tools
|
|
* to allow network i/o with interrupts disabled.
|
|
*/
|
|
static void smc_poll_controller(struct net_device *dev)
|
|
{
|
|
disable_irq(dev->irq);
|
|
smc_interrupt(dev->irq, dev);
|
|
enable_irq(dev->irq);
|
|
}
|
|
#endif
|
|
|
|
/* Our watchdog timed out. Called by the networking layer */
|
|
static void smc_timeout(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
int status, mask, eph_st, meminfo, fifo;
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
status = SMC_GET_INT(lp);
|
|
mask = SMC_GET_INT_MASK(lp);
|
|
fifo = SMC_GET_FIFO(lp);
|
|
SMC_SELECT_BANK(lp, 0);
|
|
eph_st = SMC_GET_EPH_STATUS(lp);
|
|
meminfo = SMC_GET_MIR(lp);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
spin_unlock_irq(&lp->lock);
|
|
PRINTK(dev, "TX timeout (INT 0x%02x INTMASK 0x%02x MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n",
|
|
status, mask, meminfo, fifo, eph_st);
|
|
|
|
smc_reset(dev);
|
|
smc_enable(dev);
|
|
|
|
/*
|
|
* Reconfiguring the PHY doesn't seem like a bad idea here, but
|
|
* smc_phy_configure() calls msleep() which calls schedule_timeout()
|
|
* which calls schedule(). Hence we use a work queue.
|
|
*/
|
|
if (lp->phy_type != 0)
|
|
schedule_work(&lp->phy_configure);
|
|
|
|
/* We can accept TX packets again */
|
|
dev->trans_start = jiffies; /* prevent tx timeout */
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/*
|
|
* This routine will, depending on the values passed to it,
|
|
* either make it accept multicast packets, go into
|
|
* promiscuous mode (for TCPDUMP and cousins) or accept
|
|
* a select set of multicast packets
|
|
*/
|
|
static void smc_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
unsigned char multicast_table[8];
|
|
int update_multicast = 0;
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
DBG(2, dev, "RCR_PRMS\n");
|
|
lp->rcr_cur_mode |= RCR_PRMS;
|
|
}
|
|
|
|
/* BUG? I never disable promiscuous mode if multicasting was turned on.
|
|
Now, I turn off promiscuous mode, but I don't do anything to multicasting
|
|
when promiscuous mode is turned on.
|
|
*/
|
|
|
|
/*
|
|
* Here, I am setting this to accept all multicast packets.
|
|
* I don't need to zero the multicast table, because the flag is
|
|
* checked before the table is
|
|
*/
|
|
else if (dev->flags & IFF_ALLMULTI || netdev_mc_count(dev) > 16) {
|
|
DBG(2, dev, "RCR_ALMUL\n");
|
|
lp->rcr_cur_mode |= RCR_ALMUL;
|
|
}
|
|
|
|
/*
|
|
* This sets the internal hardware table to filter out unwanted
|
|
* multicast packets before they take up memory.
|
|
*
|
|
* The SMC chip uses a hash table where the high 6 bits of the CRC of
|
|
* address are the offset into the table. If that bit is 1, then the
|
|
* multicast packet is accepted. Otherwise, it's dropped silently.
|
|
*
|
|
* To use the 6 bits as an offset into the table, the high 3 bits are
|
|
* the number of the 8 bit register, while the low 3 bits are the bit
|
|
* within that register.
|
|
*/
|
|
else if (!netdev_mc_empty(dev)) {
|
|
struct netdev_hw_addr *ha;
|
|
|
|
/* table for flipping the order of 3 bits */
|
|
static const unsigned char invert3[] = {0, 4, 2, 6, 1, 5, 3, 7};
|
|
|
|
/* start with a table of all zeros: reject all */
|
|
memset(multicast_table, 0, sizeof(multicast_table));
|
|
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
int position;
|
|
|
|
/* only use the low order bits */
|
|
position = crc32_le(~0, ha->addr, 6) & 0x3f;
|
|
|
|
/* do some messy swapping to put the bit in the right spot */
|
|
multicast_table[invert3[position&7]] |=
|
|
(1<<invert3[(position>>3)&7]);
|
|
}
|
|
|
|
/* be sure I get rid of flags I might have set */
|
|
lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
|
|
|
|
/* now, the table can be loaded into the chipset */
|
|
update_multicast = 1;
|
|
} else {
|
|
DBG(2, dev, "~(RCR_PRMS|RCR_ALMUL)\n");
|
|
lp->rcr_cur_mode &= ~(RCR_PRMS | RCR_ALMUL);
|
|
|
|
/*
|
|
* since I'm disabling all multicast entirely, I need to
|
|
* clear the multicast list
|
|
*/
|
|
memset(multicast_table, 0, sizeof(multicast_table));
|
|
update_multicast = 1;
|
|
}
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
SMC_SELECT_BANK(lp, 0);
|
|
SMC_SET_RCR(lp, lp->rcr_cur_mode);
|
|
if (update_multicast) {
|
|
SMC_SELECT_BANK(lp, 3);
|
|
SMC_SET_MCAST(lp, multicast_table);
|
|
}
|
|
SMC_SELECT_BANK(lp, 2);
|
|
spin_unlock_irq(&lp->lock);
|
|
}
|
|
|
|
|
|
/*
|
|
* Open and Initialize the board
|
|
*
|
|
* Set up everything, reset the card, etc..
|
|
*/
|
|
static int
|
|
smc_open(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
/* Setup the default Register Modes */
|
|
lp->tcr_cur_mode = TCR_DEFAULT;
|
|
lp->rcr_cur_mode = RCR_DEFAULT;
|
|
lp->rpc_cur_mode = RPC_DEFAULT |
|
|
lp->cfg.leda << RPC_LSXA_SHFT |
|
|
lp->cfg.ledb << RPC_LSXB_SHFT;
|
|
|
|
/*
|
|
* If we are not using a MII interface, we need to
|
|
* monitor our own carrier signal to detect faults.
|
|
*/
|
|
if (lp->phy_type == 0)
|
|
lp->tcr_cur_mode |= TCR_MON_CSN;
|
|
|
|
/* reset the hardware */
|
|
smc_reset(dev);
|
|
smc_enable(dev);
|
|
|
|
/* Configure the PHY, initialize the link state */
|
|
if (lp->phy_type != 0)
|
|
smc_phy_configure(&lp->phy_configure);
|
|
else {
|
|
spin_lock_irq(&lp->lock);
|
|
smc_10bt_check_media(dev, 1);
|
|
spin_unlock_irq(&lp->lock);
|
|
}
|
|
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* smc_close
|
|
*
|
|
* this makes the board clean up everything that it can
|
|
* and not talk to the outside world. Caused by
|
|
* an 'ifconfig ethX down'
|
|
*/
|
|
static int smc_close(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
|
|
DBG(2, dev, "%s\n", __func__);
|
|
|
|
netif_stop_queue(dev);
|
|
netif_carrier_off(dev);
|
|
|
|
/* clear everything */
|
|
smc_shutdown(dev);
|
|
tasklet_kill(&lp->tx_task);
|
|
smc_phy_powerdown(dev);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Ethtool support
|
|
*/
|
|
static int
|
|
smc_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
int ret;
|
|
|
|
cmd->maxtxpkt = 1;
|
|
cmd->maxrxpkt = 1;
|
|
|
|
if (lp->phy_type != 0) {
|
|
spin_lock_irq(&lp->lock);
|
|
ret = mii_ethtool_gset(&lp->mii, cmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
} else {
|
|
cmd->supported = SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_TP | SUPPORTED_AUI;
|
|
|
|
if (lp->ctl_rspeed == 10)
|
|
ethtool_cmd_speed_set(cmd, SPEED_10);
|
|
else if (lp->ctl_rspeed == 100)
|
|
ethtool_cmd_speed_set(cmd, SPEED_100);
|
|
|
|
cmd->autoneg = AUTONEG_DISABLE;
|
|
cmd->transceiver = XCVR_INTERNAL;
|
|
cmd->port = 0;
|
|
cmd->duplex = lp->tcr_cur_mode & TCR_SWFDUP ? DUPLEX_FULL : DUPLEX_HALF;
|
|
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
smc_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
int ret;
|
|
|
|
if (lp->phy_type != 0) {
|
|
spin_lock_irq(&lp->lock);
|
|
ret = mii_ethtool_sset(&lp->mii, cmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
} else {
|
|
if (cmd->autoneg != AUTONEG_DISABLE ||
|
|
cmd->speed != SPEED_10 ||
|
|
(cmd->duplex != DUPLEX_HALF && cmd->duplex != DUPLEX_FULL) ||
|
|
(cmd->port != PORT_TP && cmd->port != PORT_AUI))
|
|
return -EINVAL;
|
|
|
|
// lp->port = cmd->port;
|
|
lp->ctl_rfduplx = cmd->duplex == DUPLEX_FULL;
|
|
|
|
// if (netif_running(dev))
|
|
// smc_set_port(dev);
|
|
|
|
ret = 0;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
smc_ethtool_getdrvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
strlcpy(info->driver, CARDNAME, sizeof(info->driver));
|
|
strlcpy(info->version, version, sizeof(info->version));
|
|
strlcpy(info->bus_info, dev_name(dev->dev.parent),
|
|
sizeof(info->bus_info));
|
|
}
|
|
|
|
static int smc_ethtool_nwayreset(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
int ret = -EINVAL;
|
|
|
|
if (lp->phy_type != 0) {
|
|
spin_lock_irq(&lp->lock);
|
|
ret = mii_nway_restart(&lp->mii);
|
|
spin_unlock_irq(&lp->lock);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u32 smc_ethtool_getmsglevel(struct net_device *dev)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
return lp->msg_enable;
|
|
}
|
|
|
|
static void smc_ethtool_setmsglevel(struct net_device *dev, u32 level)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
lp->msg_enable = level;
|
|
}
|
|
|
|
static int smc_write_eeprom_word(struct net_device *dev, u16 addr, u16 word)
|
|
{
|
|
u16 ctl;
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
/* load word into GP register */
|
|
SMC_SELECT_BANK(lp, 1);
|
|
SMC_SET_GP(lp, word);
|
|
/* set the address to put the data in EEPROM */
|
|
SMC_SELECT_BANK(lp, 2);
|
|
SMC_SET_PTR(lp, addr);
|
|
/* tell it to write */
|
|
SMC_SELECT_BANK(lp, 1);
|
|
ctl = SMC_GET_CTL(lp);
|
|
SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_STORE));
|
|
/* wait for it to finish */
|
|
do {
|
|
udelay(1);
|
|
} while (SMC_GET_CTL(lp) & CTL_STORE);
|
|
/* clean up */
|
|
SMC_SET_CTL(lp, ctl);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
spin_unlock_irq(&lp->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int smc_read_eeprom_word(struct net_device *dev, u16 addr, u16 *word)
|
|
{
|
|
u16 ctl;
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
void __iomem *ioaddr = lp->base;
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
/* set the EEPROM address to get the data from */
|
|
SMC_SELECT_BANK(lp, 2);
|
|
SMC_SET_PTR(lp, addr | PTR_READ);
|
|
/* tell it to load */
|
|
SMC_SELECT_BANK(lp, 1);
|
|
SMC_SET_GP(lp, 0xffff); /* init to known */
|
|
ctl = SMC_GET_CTL(lp);
|
|
SMC_SET_CTL(lp, ctl | (CTL_EEPROM_SELECT | CTL_RELOAD));
|
|
/* wait for it to finish */
|
|
do {
|
|
udelay(1);
|
|
} while (SMC_GET_CTL(lp) & CTL_RELOAD);
|
|
/* read word from GP register */
|
|
*word = SMC_GET_GP(lp);
|
|
/* clean up */
|
|
SMC_SET_CTL(lp, ctl);
|
|
SMC_SELECT_BANK(lp, 2);
|
|
spin_unlock_irq(&lp->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int smc_ethtool_geteeprom_len(struct net_device *dev)
|
|
{
|
|
return 0x23 * 2;
|
|
}
|
|
|
|
static int smc_ethtool_geteeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
int i;
|
|
int imax;
|
|
|
|
DBG(1, dev, "Reading %d bytes at %d(0x%x)\n",
|
|
eeprom->len, eeprom->offset, eeprom->offset);
|
|
imax = smc_ethtool_geteeprom_len(dev);
|
|
for (i = 0; i < eeprom->len; i += 2) {
|
|
int ret;
|
|
u16 wbuf;
|
|
int offset = i + eeprom->offset;
|
|
if (offset > imax)
|
|
break;
|
|
ret = smc_read_eeprom_word(dev, offset >> 1, &wbuf);
|
|
if (ret != 0)
|
|
return ret;
|
|
DBG(2, dev, "Read 0x%x from 0x%x\n", wbuf, offset >> 1);
|
|
data[i] = (wbuf >> 8) & 0xff;
|
|
data[i+1] = wbuf & 0xff;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int smc_ethtool_seteeprom(struct net_device *dev,
|
|
struct ethtool_eeprom *eeprom, u8 *data)
|
|
{
|
|
int i;
|
|
int imax;
|
|
|
|
DBG(1, dev, "Writing %d bytes to %d(0x%x)\n",
|
|
eeprom->len, eeprom->offset, eeprom->offset);
|
|
imax = smc_ethtool_geteeprom_len(dev);
|
|
for (i = 0; i < eeprom->len; i += 2) {
|
|
int ret;
|
|
u16 wbuf;
|
|
int offset = i + eeprom->offset;
|
|
if (offset > imax)
|
|
break;
|
|
wbuf = (data[i] << 8) | data[i + 1];
|
|
DBG(2, dev, "Writing 0x%x to 0x%x\n", wbuf, offset >> 1);
|
|
ret = smc_write_eeprom_word(dev, offset >> 1, wbuf);
|
|
if (ret != 0)
|
|
return ret;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static const struct ethtool_ops smc_ethtool_ops = {
|
|
.get_settings = smc_ethtool_getsettings,
|
|
.set_settings = smc_ethtool_setsettings,
|
|
.get_drvinfo = smc_ethtool_getdrvinfo,
|
|
|
|
.get_msglevel = smc_ethtool_getmsglevel,
|
|
.set_msglevel = smc_ethtool_setmsglevel,
|
|
.nway_reset = smc_ethtool_nwayreset,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_eeprom_len = smc_ethtool_geteeprom_len,
|
|
.get_eeprom = smc_ethtool_geteeprom,
|
|
.set_eeprom = smc_ethtool_seteeprom,
|
|
};
|
|
|
|
static const struct net_device_ops smc_netdev_ops = {
|
|
.ndo_open = smc_open,
|
|
.ndo_stop = smc_close,
|
|
.ndo_start_xmit = smc_hard_start_xmit,
|
|
.ndo_tx_timeout = smc_timeout,
|
|
.ndo_set_rx_mode = smc_set_multicast_list,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = eth_mac_addr,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = smc_poll_controller,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* smc_findirq
|
|
*
|
|
* This routine has a simple purpose -- make the SMC chip generate an
|
|
* interrupt, so an auto-detect routine can detect it, and find the IRQ,
|
|
*/
|
|
/*
|
|
* does this still work?
|
|
*
|
|
* I just deleted auto_irq.c, since it was never built...
|
|
* --jgarzik
|
|
*/
|
|
static int smc_findirq(struct smc_local *lp)
|
|
{
|
|
void __iomem *ioaddr = lp->base;
|
|
int timeout = 20;
|
|
unsigned long cookie;
|
|
|
|
DBG(2, lp->dev, "%s: %s\n", CARDNAME, __func__);
|
|
|
|
cookie = probe_irq_on();
|
|
|
|
/*
|
|
* What I try to do here is trigger an ALLOC_INT. This is done
|
|
* by allocating a small chunk of memory, which will give an interrupt
|
|
* when done.
|
|
*/
|
|
/* enable ALLOCation interrupts ONLY */
|
|
SMC_SELECT_BANK(lp, 2);
|
|
SMC_SET_INT_MASK(lp, IM_ALLOC_INT);
|
|
|
|
/*
|
|
* Allocate 512 bytes of memory. Note that the chip was just
|
|
* reset so all the memory is available
|
|
*/
|
|
SMC_SET_MMU_CMD(lp, MC_ALLOC | 1);
|
|
|
|
/*
|
|
* Wait until positive that the interrupt has been generated
|
|
*/
|
|
do {
|
|
int int_status;
|
|
udelay(10);
|
|
int_status = SMC_GET_INT(lp);
|
|
if (int_status & IM_ALLOC_INT)
|
|
break; /* got the interrupt */
|
|
} while (--timeout);
|
|
|
|
/*
|
|
* there is really nothing that I can do here if timeout fails,
|
|
* as autoirq_report will return a 0 anyway, which is what I
|
|
* want in this case. Plus, the clean up is needed in both
|
|
* cases.
|
|
*/
|
|
|
|
/* and disable all interrupts again */
|
|
SMC_SET_INT_MASK(lp, 0);
|
|
|
|
/* and return what I found */
|
|
return probe_irq_off(cookie);
|
|
}
|
|
|
|
/*
|
|
* Function: smc_probe(unsigned long ioaddr)
|
|
*
|
|
* Purpose:
|
|
* Tests to see if a given ioaddr points to an SMC91x chip.
|
|
* Returns a 0 on success
|
|
*
|
|
* Algorithm:
|
|
* (1) see if the high byte of BANK_SELECT is 0x33
|
|
* (2) compare the ioaddr with the base register's address
|
|
* (3) see if I recognize the chip ID in the appropriate register
|
|
*
|
|
* Here I do typical initialization tasks.
|
|
*
|
|
* o Initialize the structure if needed
|
|
* o print out my vanity message if not done so already
|
|
* o print out what type of hardware is detected
|
|
* o print out the ethernet address
|
|
* o find the IRQ
|
|
* o set up my private data
|
|
* o configure the dev structure with my subroutines
|
|
* o actually GRAB the irq.
|
|
* o GRAB the region
|
|
*/
|
|
static int smc_probe(struct net_device *dev, void __iomem *ioaddr,
|
|
unsigned long irq_flags)
|
|
{
|
|
struct smc_local *lp = netdev_priv(dev);
|
|
int retval;
|
|
unsigned int val, revision_register;
|
|
const char *version_string;
|
|
|
|
DBG(2, dev, "%s: %s\n", CARDNAME, __func__);
|
|
|
|
/* First, see if the high byte is 0x33 */
|
|
val = SMC_CURRENT_BANK(lp);
|
|
DBG(2, dev, "%s: bank signature probe returned 0x%04x\n",
|
|
CARDNAME, val);
|
|
if ((val & 0xFF00) != 0x3300) {
|
|
if ((val & 0xFF) == 0x33) {
|
|
netdev_warn(dev,
|
|
"%s: Detected possible byte-swapped interface at IOADDR %p\n",
|
|
CARDNAME, ioaddr);
|
|
}
|
|
retval = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
/*
|
|
* The above MIGHT indicate a device, but I need to write to
|
|
* further test this.
|
|
*/
|
|
SMC_SELECT_BANK(lp, 0);
|
|
val = SMC_CURRENT_BANK(lp);
|
|
if ((val & 0xFF00) != 0x3300) {
|
|
retval = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
/*
|
|
* well, we've already written once, so hopefully another
|
|
* time won't hurt. This time, I need to switch the bank
|
|
* register to bank 1, so I can access the base address
|
|
* register
|
|
*/
|
|
SMC_SELECT_BANK(lp, 1);
|
|
val = SMC_GET_BASE(lp);
|
|
val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT;
|
|
if (((unsigned long)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) {
|
|
netdev_warn(dev, "%s: IOADDR %p doesn't match configuration (%x).\n",
|
|
CARDNAME, ioaddr, val);
|
|
}
|
|
|
|
/*
|
|
* check if the revision register is something that I
|
|
* recognize. These might need to be added to later,
|
|
* as future revisions could be added.
|
|
*/
|
|
SMC_SELECT_BANK(lp, 3);
|
|
revision_register = SMC_GET_REV(lp);
|
|
DBG(2, dev, "%s: revision = 0x%04x\n", CARDNAME, revision_register);
|
|
version_string = chip_ids[ (revision_register >> 4) & 0xF];
|
|
if (!version_string || (revision_register & 0xff00) != 0x3300) {
|
|
/* I don't recognize this chip, so... */
|
|
netdev_warn(dev, "%s: IO %p: Unrecognized revision register 0x%04x, Contact author.\n",
|
|
CARDNAME, ioaddr, revision_register);
|
|
|
|
retval = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
/* At this point I'll assume that the chip is an SMC91x. */
|
|
pr_info_once("%s\n", version);
|
|
|
|
/* fill in some of the fields */
|
|
dev->base_addr = (unsigned long)ioaddr;
|
|
lp->base = ioaddr;
|
|
lp->version = revision_register & 0xff;
|
|
spin_lock_init(&lp->lock);
|
|
|
|
/* Get the MAC address */
|
|
SMC_SELECT_BANK(lp, 1);
|
|
SMC_GET_MAC_ADDR(lp, dev->dev_addr);
|
|
|
|
/* now, reset the chip, and put it into a known state */
|
|
smc_reset(dev);
|
|
|
|
/*
|
|
* If dev->irq is 0, then the device has to be banged on to see
|
|
* what the IRQ is.
|
|
*
|
|
* This banging doesn't always detect the IRQ, for unknown reasons.
|
|
* a workaround is to reset the chip and try again.
|
|
*
|
|
* Interestingly, the DOS packet driver *SETS* the IRQ on the card to
|
|
* be what is requested on the command line. I don't do that, mostly
|
|
* because the card that I have uses a non-standard method of accessing
|
|
* the IRQs, and because this _should_ work in most configurations.
|
|
*
|
|
* Specifying an IRQ is done with the assumption that the user knows
|
|
* what (s)he is doing. No checking is done!!!!
|
|
*/
|
|
if (dev->irq < 1) {
|
|
int trials;
|
|
|
|
trials = 3;
|
|
while (trials--) {
|
|
dev->irq = smc_findirq(lp);
|
|
if (dev->irq)
|
|
break;
|
|
/* kick the card and try again */
|
|
smc_reset(dev);
|
|
}
|
|
}
|
|
if (dev->irq == 0) {
|
|
netdev_warn(dev, "Couldn't autodetect your IRQ. Use irq=xx.\n");
|
|
retval = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
dev->irq = irq_canonicalize(dev->irq);
|
|
|
|
dev->watchdog_timeo = msecs_to_jiffies(watchdog);
|
|
dev->netdev_ops = &smc_netdev_ops;
|
|
dev->ethtool_ops = &smc_ethtool_ops;
|
|
|
|
tasklet_init(&lp->tx_task, smc_hardware_send_pkt, (unsigned long)dev);
|
|
INIT_WORK(&lp->phy_configure, smc_phy_configure);
|
|
lp->dev = dev;
|
|
lp->mii.phy_id_mask = 0x1f;
|
|
lp->mii.reg_num_mask = 0x1f;
|
|
lp->mii.force_media = 0;
|
|
lp->mii.full_duplex = 0;
|
|
lp->mii.dev = dev;
|
|
lp->mii.mdio_read = smc_phy_read;
|
|
lp->mii.mdio_write = smc_phy_write;
|
|
|
|
/*
|
|
* Locate the phy, if any.
|
|
*/
|
|
if (lp->version >= (CHIP_91100 << 4))
|
|
smc_phy_detect(dev);
|
|
|
|
/* then shut everything down to save power */
|
|
smc_shutdown(dev);
|
|
smc_phy_powerdown(dev);
|
|
|
|
/* Set default parameters */
|
|
lp->msg_enable = NETIF_MSG_LINK;
|
|
lp->ctl_rfduplx = 0;
|
|
lp->ctl_rspeed = 10;
|
|
|
|
if (lp->version >= (CHIP_91100 << 4)) {
|
|
lp->ctl_rfduplx = 1;
|
|
lp->ctl_rspeed = 100;
|
|
}
|
|
|
|
/* Grab the IRQ */
|
|
retval = request_irq(dev->irq, smc_interrupt, irq_flags, dev->name, dev);
|
|
if (retval)
|
|
goto err_out;
|
|
|
|
#ifdef CONFIG_ARCH_PXA
|
|
# ifdef SMC_USE_PXA_DMA
|
|
lp->cfg.flags |= SMC91X_USE_DMA;
|
|
# endif
|
|
if (lp->cfg.flags & SMC91X_USE_DMA) {
|
|
int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
|
|
smc_pxa_dma_irq, NULL);
|
|
if (dma >= 0)
|
|
dev->dma = dma;
|
|
}
|
|
#endif
|
|
|
|
retval = register_netdev(dev);
|
|
if (retval == 0) {
|
|
/* now, print out the card info, in a short format.. */
|
|
netdev_info(dev, "%s (rev %d) at %p IRQ %d",
|
|
version_string, revision_register & 0x0f,
|
|
lp->base, dev->irq);
|
|
|
|
if (dev->dma != (unsigned char)-1)
|
|
pr_cont(" DMA %d", dev->dma);
|
|
|
|
pr_cont("%s%s\n",
|
|
lp->cfg.flags & SMC91X_NOWAIT ? " [nowait]" : "",
|
|
THROTTLE_TX_PKTS ? " [throttle_tx]" : "");
|
|
|
|
if (!is_valid_ether_addr(dev->dev_addr)) {
|
|
netdev_warn(dev, "Invalid ethernet MAC address. Please set using ifconfig\n");
|
|
} else {
|
|
/* Print the Ethernet address */
|
|
netdev_info(dev, "Ethernet addr: %pM\n",
|
|
dev->dev_addr);
|
|
}
|
|
|
|
if (lp->phy_type == 0) {
|
|
PRINTK(dev, "No PHY found\n");
|
|
} else if ((lp->phy_type & 0xfffffff0) == 0x0016f840) {
|
|
PRINTK(dev, "PHY LAN83C183 (LAN91C111 Internal)\n");
|
|
} else if ((lp->phy_type & 0xfffffff0) == 0x02821c50) {
|
|
PRINTK(dev, "PHY LAN83C180\n");
|
|
}
|
|
}
|
|
|
|
err_out:
|
|
#ifdef CONFIG_ARCH_PXA
|
|
if (retval && dev->dma != (unsigned char)-1)
|
|
pxa_free_dma(dev->dma);
|
|
#endif
|
|
return retval;
|
|
}
|
|
|
|
static int smc_enable_device(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct smc_local *lp = netdev_priv(ndev);
|
|
unsigned long flags;
|
|
unsigned char ecor, ecsr;
|
|
void __iomem *addr;
|
|
struct resource * res;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
|
|
if (!res)
|
|
return 0;
|
|
|
|
/*
|
|
* Map the attribute space. This is overkill, but clean.
|
|
*/
|
|
addr = ioremap(res->start, ATTRIB_SIZE);
|
|
if (!addr)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Reset the device. We must disable IRQs around this
|
|
* since a reset causes the IRQ line become active.
|
|
*/
|
|
local_irq_save(flags);
|
|
ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
|
|
writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
|
|
readb(addr + (ECOR << SMC_IO_SHIFT));
|
|
|
|
/*
|
|
* Wait 100us for the chip to reset.
|
|
*/
|
|
udelay(100);
|
|
|
|
/*
|
|
* The device will ignore all writes to the enable bit while
|
|
* reset is asserted, even if the reset bit is cleared in the
|
|
* same write. Must clear reset first, then enable the device.
|
|
*/
|
|
writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
|
|
writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
|
|
|
|
/*
|
|
* Set the appropriate byte/word mode.
|
|
*/
|
|
ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
|
|
if (!SMC_16BIT(lp))
|
|
ecsr |= ECSR_IOIS8;
|
|
writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
|
|
local_irq_restore(flags);
|
|
|
|
iounmap(addr);
|
|
|
|
/*
|
|
* Wait for the chip to wake up. We could poll the control
|
|
* register in the main register space, but that isn't mapped
|
|
* yet. We know this is going to take 750us.
|
|
*/
|
|
msleep(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smc_request_attrib(struct platform_device *pdev,
|
|
struct net_device *ndev)
|
|
{
|
|
struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
|
|
struct smc_local *lp __maybe_unused = netdev_priv(ndev);
|
|
|
|
if (!res)
|
|
return 0;
|
|
|
|
if (!request_mem_region(res->start, ATTRIB_SIZE, CARDNAME))
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void smc_release_attrib(struct platform_device *pdev,
|
|
struct net_device *ndev)
|
|
{
|
|
struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-attrib");
|
|
struct smc_local *lp __maybe_unused = netdev_priv(ndev);
|
|
|
|
if (res)
|
|
release_mem_region(res->start, ATTRIB_SIZE);
|
|
}
|
|
|
|
static inline void smc_request_datacs(struct platform_device *pdev, struct net_device *ndev)
|
|
{
|
|
if (SMC_CAN_USE_DATACS) {
|
|
struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32");
|
|
struct smc_local *lp = netdev_priv(ndev);
|
|
|
|
if (!res)
|
|
return;
|
|
|
|
if(!request_mem_region(res->start, SMC_DATA_EXTENT, CARDNAME)) {
|
|
netdev_info(ndev, "%s: failed to request datacs memory region.\n",
|
|
CARDNAME);
|
|
return;
|
|
}
|
|
|
|
lp->datacs = ioremap(res->start, SMC_DATA_EXTENT);
|
|
}
|
|
}
|
|
|
|
static void smc_release_datacs(struct platform_device *pdev, struct net_device *ndev)
|
|
{
|
|
if (SMC_CAN_USE_DATACS) {
|
|
struct smc_local *lp = netdev_priv(ndev);
|
|
struct resource * res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-data32");
|
|
|
|
if (lp->datacs)
|
|
iounmap(lp->datacs);
|
|
|
|
lp->datacs = NULL;
|
|
|
|
if (res)
|
|
release_mem_region(res->start, SMC_DATA_EXTENT);
|
|
}
|
|
}
|
|
|
|
#if IS_BUILTIN(CONFIG_OF)
|
|
static const struct of_device_id smc91x_match[] = {
|
|
{ .compatible = "smsc,lan91c94", },
|
|
{ .compatible = "smsc,lan91c111", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, smc91x_match);
|
|
|
|
/**
|
|
* of_try_set_control_gpio - configure a gpio if it exists
|
|
*/
|
|
static int try_toggle_control_gpio(struct device *dev,
|
|
struct gpio_desc **desc,
|
|
const char *name, int index,
|
|
int value, unsigned int nsdelay)
|
|
{
|
|
struct gpio_desc *gpio = *desc;
|
|
int res;
|
|
|
|
gpio = devm_gpiod_get_index(dev, name, index);
|
|
if (IS_ERR(gpio)) {
|
|
if (PTR_ERR(gpio) == -ENOENT) {
|
|
*desc = NULL;
|
|
return 0;
|
|
}
|
|
|
|
return PTR_ERR(gpio);
|
|
}
|
|
res = gpiod_direction_output(gpio, !value);
|
|
if (res) {
|
|
dev_err(dev, "unable to toggle gpio %s: %i\n", name, res);
|
|
devm_gpiod_put(dev, gpio);
|
|
gpio = NULL;
|
|
return res;
|
|
}
|
|
if (nsdelay)
|
|
usleep_range(nsdelay, 2 * nsdelay);
|
|
gpiod_set_value_cansleep(gpio, value);
|
|
*desc = gpio;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* smc_init(void)
|
|
* Input parameters:
|
|
* dev->base_addr == 0, try to find all possible locations
|
|
* dev->base_addr > 0x1ff, this is the address to check
|
|
* dev->base_addr == <anything else>, return failure code
|
|
*
|
|
* Output:
|
|
* 0 --> there is a device
|
|
* anything else, error
|
|
*/
|
|
static int smc_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev);
|
|
const struct of_device_id *match = NULL;
|
|
struct smc_local *lp;
|
|
struct net_device *ndev;
|
|
struct resource *res, *ires;
|
|
unsigned int __iomem *addr;
|
|
unsigned long irq_flags = SMC_IRQ_FLAGS;
|
|
int ret;
|
|
|
|
ndev = alloc_etherdev(sizeof(struct smc_local));
|
|
if (!ndev) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
SET_NETDEV_DEV(ndev, &pdev->dev);
|
|
|
|
/* get configuration from platform data, only allow use of
|
|
* bus width if both SMC_CAN_USE_xxx and SMC91X_USE_xxx are set.
|
|
*/
|
|
|
|
lp = netdev_priv(ndev);
|
|
lp->cfg.flags = 0;
|
|
|
|
if (pd) {
|
|
memcpy(&lp->cfg, pd, sizeof(lp->cfg));
|
|
lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags);
|
|
}
|
|
|
|
#if IS_BUILTIN(CONFIG_OF)
|
|
match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev);
|
|
if (match) {
|
|
struct device_node *np = pdev->dev.of_node;
|
|
u32 val;
|
|
|
|
/* Optional pwrdwn GPIO configured? */
|
|
ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio,
|
|
"power", 0, 0, 100);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Optional reset GPIO configured? Minimum 100 ns reset needed
|
|
* according to LAN91C96 datasheet page 14.
|
|
*/
|
|
ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio,
|
|
"reset", 0, 0, 100);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Need to wait for optional EEPROM to load, max 750 us according
|
|
* to LAN91C96 datasheet page 55.
|
|
*/
|
|
if (lp->reset_gpio)
|
|
usleep_range(750, 1000);
|
|
|
|
/* Combination of IO widths supported, default to 16-bit */
|
|
if (!of_property_read_u32(np, "reg-io-width", &val)) {
|
|
if (val & 1)
|
|
lp->cfg.flags |= SMC91X_USE_8BIT;
|
|
if ((val == 0) || (val & 2))
|
|
lp->cfg.flags |= SMC91X_USE_16BIT;
|
|
if (val & 4)
|
|
lp->cfg.flags |= SMC91X_USE_32BIT;
|
|
} else {
|
|
lp->cfg.flags |= SMC91X_USE_16BIT;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
if (!pd && !match) {
|
|
lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0;
|
|
lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0;
|
|
lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0;
|
|
lp->cfg.flags |= (nowait) ? SMC91X_NOWAIT : 0;
|
|
}
|
|
|
|
if (!lp->cfg.leda && !lp->cfg.ledb) {
|
|
lp->cfg.leda = RPC_LSA_DEFAULT;
|
|
lp->cfg.ledb = RPC_LSB_DEFAULT;
|
|
}
|
|
|
|
ndev->dma = (unsigned char)-1;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
|
|
if (!res)
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
ret = -ENODEV;
|
|
goto out_free_netdev;
|
|
}
|
|
|
|
|
|
if (!request_mem_region(res->start, SMC_IO_EXTENT, CARDNAME)) {
|
|
ret = -EBUSY;
|
|
goto out_free_netdev;
|
|
}
|
|
|
|
ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!ires) {
|
|
ret = -ENODEV;
|
|
goto out_release_io;
|
|
}
|
|
|
|
ndev->irq = ires->start;
|
|
|
|
if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK)
|
|
irq_flags = ires->flags & IRQF_TRIGGER_MASK;
|
|
|
|
ret = smc_request_attrib(pdev, ndev);
|
|
if (ret)
|
|
goto out_release_io;
|
|
#if defined(CONFIG_SA1100_ASSABET)
|
|
neponset_ncr_set(NCR_ENET_OSC_EN);
|
|
#endif
|
|
platform_set_drvdata(pdev, ndev);
|
|
ret = smc_enable_device(pdev);
|
|
if (ret)
|
|
goto out_release_attrib;
|
|
|
|
addr = ioremap(res->start, SMC_IO_EXTENT);
|
|
if (!addr) {
|
|
ret = -ENOMEM;
|
|
goto out_release_attrib;
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_PXA
|
|
{
|
|
struct smc_local *lp = netdev_priv(ndev);
|
|
lp->device = &pdev->dev;
|
|
lp->physaddr = res->start;
|
|
}
|
|
#endif
|
|
|
|
ret = smc_probe(ndev, addr, irq_flags);
|
|
if (ret != 0)
|
|
goto out_iounmap;
|
|
|
|
smc_request_datacs(pdev, ndev);
|
|
|
|
return 0;
|
|
|
|
out_iounmap:
|
|
iounmap(addr);
|
|
out_release_attrib:
|
|
smc_release_attrib(pdev, ndev);
|
|
out_release_io:
|
|
release_mem_region(res->start, SMC_IO_EXTENT);
|
|
out_free_netdev:
|
|
free_netdev(ndev);
|
|
out:
|
|
pr_info("%s: not found (%d).\n", CARDNAME, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int smc_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
struct smc_local *lp = netdev_priv(ndev);
|
|
struct resource *res;
|
|
|
|
unregister_netdev(ndev);
|
|
|
|
free_irq(ndev->irq, ndev);
|
|
|
|
#ifdef CONFIG_ARCH_PXA
|
|
if (ndev->dma != (unsigned char)-1)
|
|
pxa_free_dma(ndev->dma);
|
|
#endif
|
|
iounmap(lp->base);
|
|
|
|
smc_release_datacs(pdev,ndev);
|
|
smc_release_attrib(pdev,ndev);
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "smc91x-regs");
|
|
if (!res)
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(res->start, SMC_IO_EXTENT);
|
|
|
|
free_netdev(ndev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smc_drv_suspend(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
|
|
if (ndev) {
|
|
if (netif_running(ndev)) {
|
|
netif_device_detach(ndev);
|
|
smc_shutdown(ndev);
|
|
smc_phy_powerdown(ndev);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int smc_drv_resume(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct net_device *ndev = platform_get_drvdata(pdev);
|
|
|
|
if (ndev) {
|
|
struct smc_local *lp = netdev_priv(ndev);
|
|
smc_enable_device(pdev);
|
|
if (netif_running(ndev)) {
|
|
smc_reset(ndev);
|
|
smc_enable(ndev);
|
|
if (lp->phy_type != 0)
|
|
smc_phy_configure(&lp->phy_configure);
|
|
netif_device_attach(ndev);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct dev_pm_ops smc_drv_pm_ops = {
|
|
.suspend = smc_drv_suspend,
|
|
.resume = smc_drv_resume,
|
|
};
|
|
|
|
static struct platform_driver smc_driver = {
|
|
.probe = smc_drv_probe,
|
|
.remove = smc_drv_remove,
|
|
.driver = {
|
|
.name = CARDNAME,
|
|
.pm = &smc_drv_pm_ops,
|
|
.of_match_table = of_match_ptr(smc91x_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(smc_driver);
|