mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-06 02:24:14 +08:00
f212ec4b7b
This patch adds a new configuration option, which adds support for a new early_param which gets checked in arch/x86/kernel/setup_{32,64}.c:setup_arch() to decide wether OHCI-1394 FireWire controllers should be initialized and enabled for physical DMA access to allow remote debugging of early problems like issues ACPI or other subsystems which are executed very early. If the config option is not enabled, no code is changed, and if the boot paramenter is not given, no new code is executed, and independent of that, all new code is freed after boot, so the config option can be even enabled in standard, non-debug kernels. With specialized tools, it is then possible to get debugging information from machines which have no serial ports (notebooks) such as the printk buffer contents, or any data which can be referenced from global pointers, if it is stored below the 4GB limit and even memory dumps of of the physical RAM region below the 4GB limit can be taken without any cooperation from the CPU of the host, so the machine can be crashed early, it does not matter. In the extreme, even kernel debuggers can be accessed in this way. I wrote a small kgdb module and an accompanying gdb stub for FireWire which allows to gdb to talk to kgdb using remote remory reads and writes over FireWire. An version of the gdb stub fore FireWire is able to read all global data from a system which is running a a normal kernel without any kernel debugger, without any interruption or support of the system's CPU. That way, e.g. the task struct and so on can be read and even manipulated when the physical DMA access is granted. A HOWTO is included in this patch, in Documentation/debugging-via-ohci1394.txt and I've put a copy online at ftp://ftp.suse.de/private/bk/firewire/docs/debugging-via-ohci1394.txt It also has links to all the tools which are available to make use of it another copy of it is online at: ftp://ftp.suse.de/private/bk/firewire/kernel/ohci1394_dma_early-v2.diff Signed-Off-By: Bernhard Kaindl <bk@suse.de> Tested-By: Thomas Renninger <trenn@suse.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
286 lines
9.2 KiB
C
286 lines
9.2 KiB
C
/*
|
|
* init_ohci1394_dma.c - Initializes physical DMA on all OHCI 1394 controllers
|
|
*
|
|
* Copyright (C) 2006-2007 Bernhard Kaindl <bk@suse.de>
|
|
*
|
|
* Derived from drivers/ieee1394/ohci1394.c and arch/x86/kernel/early-quirks.c
|
|
* this file has functions to:
|
|
* - scan the PCI very early on boot for all OHCI 1394-compliant controllers
|
|
* - reset and initialize them and make them join the IEEE1394 bus and
|
|
* - enable physical DMA on them to allow remote debugging
|
|
*
|
|
* All code and data is marked as __init and __initdata, respective as
|
|
* during boot, all OHCI1394 controllers may be claimed by the firewire
|
|
* stack and at this point, this code should not touch them anymore.
|
|
*
|
|
* To use physical DMA after the initialization of the firewire stack,
|
|
* be sure that the stack enables it and (re-)attach after the bus reset
|
|
* which may be caused by the firewire stack initialization.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include <linux/interrupt.h> /* for ohci1394.h */
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h> /* for PCI defines */
|
|
#include <linux/init_ohci1394_dma.h>
|
|
#include <asm/pci-direct.h> /* for direct PCI config space access */
|
|
#include <asm/fixmap.h>
|
|
|
|
#include "ieee1394_types.h"
|
|
#include "ohci1394.h"
|
|
|
|
int __initdata init_ohci1394_dma_early;
|
|
|
|
/* Reads a PHY register of an OHCI-1394 controller */
|
|
static inline u8 __init get_phy_reg(struct ti_ohci *ohci, u8 addr)
|
|
{
|
|
int i;
|
|
quadlet_t r;
|
|
|
|
reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000);
|
|
|
|
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
|
|
if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000)
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
r = reg_read(ohci, OHCI1394_PhyControl);
|
|
|
|
return (r & 0x00ff0000) >> 16;
|
|
}
|
|
|
|
/* Writes to a PHY register of an OHCI-1394 controller */
|
|
static inline void __init set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data)
|
|
{
|
|
int i;
|
|
|
|
reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000);
|
|
|
|
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
|
|
u32 r = reg_read(ohci, OHCI1394_PhyControl);
|
|
if (!(r & 0x00004000))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
}
|
|
|
|
/* Resets an OHCI-1394 controller (for sane state before initialization) */
|
|
static inline void __init init_ohci1394_soft_reset(struct ti_ohci *ohci) {
|
|
int i;
|
|
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset);
|
|
|
|
for (i = 0; i < OHCI_LOOP_COUNT; i++) {
|
|
if (!(reg_read(ohci, OHCI1394_HCControlSet)
|
|
& OHCI1394_HCControl_softReset))
|
|
break;
|
|
mdelay(1);
|
|
}
|
|
}
|
|
|
|
/* Basic OHCI-1394 register and port inititalization */
|
|
static inline void __init init_ohci1394_initialize(struct ti_ohci *ohci)
|
|
{
|
|
quadlet_t bus_options;
|
|
int num_ports, i;
|
|
|
|
/* Put some defaults to these undefined bus options */
|
|
bus_options = reg_read(ohci, OHCI1394_BusOptions);
|
|
bus_options |= 0x60000000; /* Enable CMC and ISC */
|
|
bus_options &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */
|
|
bus_options &= ~0x18000000; /* Disable PMC and BMC */
|
|
reg_write(ohci, OHCI1394_BusOptions, bus_options);
|
|
|
|
/* Set the bus number */
|
|
reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0);
|
|
|
|
/* Enable posted writes */
|
|
reg_write(ohci, OHCI1394_HCControlSet,
|
|
OHCI1394_HCControl_postedWriteEnable);
|
|
|
|
/* Clear link control register */
|
|
reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff);
|
|
|
|
/* enable phys */
|
|
reg_write(ohci, OHCI1394_LinkControlSet,
|
|
OHCI1394_LinkControl_RcvPhyPkt);
|
|
|
|
/* Don't accept phy packets into AR request context */
|
|
reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400);
|
|
|
|
/* Clear the Isochonouys interrupt masks */
|
|
reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff);
|
|
|
|
/* Accept asyncronous transfer requests from all nodes for now */
|
|
reg_write(ohci,OHCI1394_AsReqFilterHiSet, 0x80000000);
|
|
|
|
/* Specify asyncronous transfer retries */
|
|
reg_write(ohci, OHCI1394_ATRetries,
|
|
OHCI1394_MAX_AT_REQ_RETRIES |
|
|
(OHCI1394_MAX_AT_RESP_RETRIES<<4) |
|
|
(OHCI1394_MAX_PHYS_RESP_RETRIES<<8));
|
|
|
|
/* We don't want hardware swapping */
|
|
reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap);
|
|
|
|
/* Enable link */
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable);
|
|
|
|
/* If anything is connected to a port, make sure it is enabled */
|
|
num_ports = get_phy_reg(ohci, 2) & 0xf;
|
|
for (i = 0; i < num_ports; i++) {
|
|
unsigned int status;
|
|
|
|
set_phy_reg(ohci, 7, i);
|
|
status = get_phy_reg(ohci, 8);
|
|
|
|
if (status & 0x20)
|
|
set_phy_reg(ohci, 8, status & ~1);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* init_ohci1394_wait_for_busresets - wait until bus resets are completed
|
|
*
|
|
* OHCI1394 initialization itself and any device going on- or offline
|
|
* and any cable issue cause a IEEE1394 bus reset. The OHCI1394 spec
|
|
* specifies that physical DMA is disabled on each bus reset and it
|
|
* has to be enabled after each bus reset when needed. We resort
|
|
* to polling here because on early boot, we have no interrupts.
|
|
*/
|
|
static inline void __init init_ohci1394_wait_for_busresets(struct ti_ohci *ohci)
|
|
{
|
|
int i, events;
|
|
|
|
for (i=0; i < 9; i++) {
|
|
mdelay(200);
|
|
events = reg_read(ohci, OHCI1394_IntEventSet);
|
|
if (events & OHCI1394_busReset)
|
|
reg_write(ohci, OHCI1394_IntEventClear,
|
|
OHCI1394_busReset);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* init_ohci1394_enable_physical_dma - Enable physical DMA for remote debugging
|
|
* This enables remote DMA access over IEEE1394 from every host for the low
|
|
* 4GB of address space. DMA accesses above 4GB are not available currently.
|
|
*/
|
|
static inline void __init init_ohci1394_enable_physical_dma(struct ti_ohci *hci)
|
|
{
|
|
reg_write(hci, OHCI1394_PhyReqFilterHiSet, 0xffffffff);
|
|
reg_write(hci, OHCI1394_PhyReqFilterLoSet, 0xffffffff);
|
|
reg_write(hci, OHCI1394_PhyUpperBound, 0xffff0000);
|
|
}
|
|
|
|
/**
|
|
* init_ohci1394_reset_and_init_dma - init controller and enable DMA
|
|
* This initializes the given controller and enables physical DMA engine in it.
|
|
*/
|
|
static inline void __init init_ohci1394_reset_and_init_dma(struct ti_ohci *ohci)
|
|
{
|
|
/* Start off with a soft reset, clears everything to a sane state. */
|
|
init_ohci1394_soft_reset(ohci);
|
|
|
|
/* Accessing some registers without LPS enabled may cause lock up */
|
|
reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS);
|
|
|
|
/* Disable and clear interrupts */
|
|
reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff);
|
|
reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff);
|
|
|
|
mdelay(50); /* Wait 50msec to make sure we have full link enabled */
|
|
|
|
init_ohci1394_initialize(ohci);
|
|
/*
|
|
* The initialization causes at least one IEEE1394 bus reset. Enabling
|
|
* physical DMA only works *after* *all* bus resets have calmed down:
|
|
*/
|
|
init_ohci1394_wait_for_busresets(ohci);
|
|
|
|
/* We had to wait and do this now if we want to debug early problems */
|
|
init_ohci1394_enable_physical_dma(ohci);
|
|
}
|
|
|
|
/**
|
|
* init_ohci1394_controller - Map the registers of the controller and init DMA
|
|
* This maps the registers of the specified controller and initializes it
|
|
*/
|
|
static inline void __init init_ohci1394_controller(int num, int slot, int func)
|
|
{
|
|
unsigned long ohci_base;
|
|
struct ti_ohci ohci;
|
|
|
|
printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394"
|
|
" at %02x:%02x.%x\n", num, slot, func);
|
|
|
|
ohci_base = read_pci_config(num, slot, func, PCI_BASE_ADDRESS_0+(0<<2))
|
|
& PCI_BASE_ADDRESS_MEM_MASK;
|
|
|
|
set_fixmap_nocache(FIX_OHCI1394_BASE, ohci_base);
|
|
|
|
ohci.registers = (void *)fix_to_virt(FIX_OHCI1394_BASE);
|
|
|
|
init_ohci1394_reset_and_init_dma(&ohci);
|
|
}
|
|
|
|
/**
|
|
* debug_init_ohci1394_dma - scan for OHCI1394 controllers and init DMA on them
|
|
* Scans the whole PCI space for OHCI1394 controllers and inits DMA on them
|
|
*/
|
|
void __init init_ohci1394_dma_on_all_controllers(void)
|
|
{
|
|
int num, slot, func;
|
|
|
|
if (!early_pci_allowed())
|
|
return;
|
|
|
|
/* Poor man's PCI discovery, the only thing we can do at early boot */
|
|
for (num = 0; num < 32; num++) {
|
|
for (slot = 0; slot < 32; slot++) {
|
|
for (func = 0; func < 8; func++) {
|
|
u32 class = read_pci_config(num,slot,func,
|
|
PCI_CLASS_REVISION);
|
|
if ((class == 0xffffffff))
|
|
continue; /* No device at this func */
|
|
|
|
if (class>>8 != PCI_CLASS_SERIAL_FIREWIRE_OHCI)
|
|
continue; /* Not an OHCI-1394 device */
|
|
|
|
init_ohci1394_controller(num, slot, func);
|
|
break; /* Assume one controller per device */
|
|
}
|
|
}
|
|
}
|
|
printk(KERN_INFO "init_ohci1394_dma: finished initializing OHCI DMA\n");
|
|
}
|
|
|
|
/**
|
|
* setup_init_ohci1394_early - enables early OHCI1394 DMA initialization
|
|
*/
|
|
static int __init setup_ohci1394_dma(char *opt)
|
|
{
|
|
if (!strcmp(opt, "early"))
|
|
init_ohci1394_dma_early = 1;
|
|
return 0;
|
|
}
|
|
|
|
/* passing ohci1394_dma=early on boot causes early OHCI1394 DMA initialization */
|
|
early_param("ohci1394_dma", setup_ohci1394_dma);
|