linux/drivers/mmc/omap.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

1224 lines
30 KiB
C

/*
* linux/drivers/media/mmc/omap.c
*
* Copyright (C) 2004 Nokia Corporation
* Written by Tuukka Tikkanen and Juha Yrjölä<juha.yrjola@nokia.com>
* Misc hacks here and there by Tony Lindgren <tony@atomide.com>
* Other hacks (DMA, SD, etc) by David Brownell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
#include <linux/mmc/card.h>
#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/scatterlist.h>
#include <asm/mach-types.h>
#include <asm/arch/board.h>
#include <asm/arch/gpio.h>
#include <asm/arch/dma.h>
#include <asm/arch/mux.h>
#include <asm/arch/fpga.h>
#include <asm/arch/tps65010.h>
#include "omap.h"
#define DRIVER_NAME "mmci-omap"
#define RSP_TYPE(x) ((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
/* Specifies how often in millisecs to poll for card status changes
* when the cover switch is open */
#define OMAP_MMC_SWITCH_POLL_DELAY 500
static int mmc_omap_enable_poll = 1;
struct mmc_omap_host {
int initialized;
int suspended;
struct mmc_request * mrq;
struct mmc_command * cmd;
struct mmc_data * data;
struct mmc_host * mmc;
struct device * dev;
unsigned char id; /* 16xx chips have 2 MMC blocks */
struct clk * iclk;
struct clk * fclk;
struct resource *res;
void __iomem *base;
int irq;
unsigned char bus_mode;
unsigned char hw_bus_mode;
unsigned int sg_len;
int sg_idx;
u16 * buffer;
u32 buffer_bytes_left;
u32 total_bytes_left;
unsigned use_dma:1;
unsigned brs_received:1, dma_done:1;
unsigned dma_is_read:1;
unsigned dma_in_use:1;
int dma_ch;
spinlock_t dma_lock;
struct timer_list dma_timer;
unsigned dma_len;
short power_pin;
short wp_pin;
int switch_pin;
struct work_struct switch_work;
struct timer_list switch_timer;
int switch_last_state;
};
static inline int
mmc_omap_cover_is_open(struct mmc_omap_host *host)
{
if (host->switch_pin < 0)
return 0;
return omap_get_gpio_datain(host->switch_pin);
}
static ssize_t
mmc_omap_show_cover_switch(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct mmc_omap_host *host = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", mmc_omap_cover_is_open(host) ? "open" :
"closed");
}
static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL);
static ssize_t
mmc_omap_show_enable_poll(struct device *dev,
struct device_attribute *attr, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n", mmc_omap_enable_poll);
}
static ssize_t
mmc_omap_store_enable_poll(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t size)
{
int enable_poll;
if (sscanf(buf, "%10d", &enable_poll) != 1)
return -EINVAL;
if (enable_poll != mmc_omap_enable_poll) {
struct mmc_omap_host *host = dev_get_drvdata(dev);
mmc_omap_enable_poll = enable_poll;
if (enable_poll && host->switch_pin >= 0)
schedule_work(&host->switch_work);
}
return size;
}
static DEVICE_ATTR(enable_poll, 0664,
mmc_omap_show_enable_poll, mmc_omap_store_enable_poll);
static void
mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd)
{
u32 cmdreg;
u32 resptype;
u32 cmdtype;
host->cmd = cmd;
resptype = 0;
cmdtype = 0;
/* Our hardware needs to know exact type */
switch (RSP_TYPE(mmc_resp_type(cmd))) {
case RSP_TYPE(MMC_RSP_R1):
/* resp 1, resp 1b */
resptype = 1;
break;
case RSP_TYPE(MMC_RSP_R2):
resptype = 2;
break;
case RSP_TYPE(MMC_RSP_R3):
resptype = 3;
break;
default:
break;
}
if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) {
cmdtype = OMAP_MMC_CMDTYPE_ADTC;
} else if (mmc_cmd_type(cmd) == MMC_CMD_BC) {
cmdtype = OMAP_MMC_CMDTYPE_BC;
} else if (mmc_cmd_type(cmd) == MMC_CMD_BCR) {
cmdtype = OMAP_MMC_CMDTYPE_BCR;
} else {
cmdtype = OMAP_MMC_CMDTYPE_AC;
}
cmdreg = cmd->opcode | (resptype << 8) | (cmdtype << 12);
if (host->bus_mode == MMC_BUSMODE_OPENDRAIN)
cmdreg |= 1 << 6;
if (cmd->flags & MMC_RSP_BUSY)
cmdreg |= 1 << 11;
if (host->data && !(host->data->flags & MMC_DATA_WRITE))
cmdreg |= 1 << 15;
clk_enable(host->fclk);
OMAP_MMC_WRITE(host->base, CTO, 200);
OMAP_MMC_WRITE(host->base, ARGL, cmd->arg & 0xffff);
OMAP_MMC_WRITE(host->base, ARGH, cmd->arg >> 16);
OMAP_MMC_WRITE(host->base, IE,
OMAP_MMC_STAT_A_EMPTY | OMAP_MMC_STAT_A_FULL |
OMAP_MMC_STAT_CMD_CRC | OMAP_MMC_STAT_CMD_TOUT |
OMAP_MMC_STAT_DATA_CRC | OMAP_MMC_STAT_DATA_TOUT |
OMAP_MMC_STAT_END_OF_CMD | OMAP_MMC_STAT_CARD_ERR |
OMAP_MMC_STAT_END_OF_DATA);
OMAP_MMC_WRITE(host->base, CMD, cmdreg);
}
static void
mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data)
{
if (host->dma_in_use) {
enum dma_data_direction dma_data_dir;
BUG_ON(host->dma_ch < 0);
if (data->error != MMC_ERR_NONE)
omap_stop_dma(host->dma_ch);
/* Release DMA channel lazily */
mod_timer(&host->dma_timer, jiffies + HZ);
if (data->flags & MMC_DATA_WRITE)
dma_data_dir = DMA_TO_DEVICE;
else
dma_data_dir = DMA_FROM_DEVICE;
dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->sg_len,
dma_data_dir);
}
host->data = NULL;
host->sg_len = 0;
clk_disable(host->fclk);
/* NOTE: MMC layer will sometimes poll-wait CMD13 next, issuing
* dozens of requests until the card finishes writing data.
* It'd be cheaper to just wait till an EOFB interrupt arrives...
*/
if (!data->stop) {
host->mrq = NULL;
mmc_request_done(host->mmc, data->mrq);
return;
}
mmc_omap_start_command(host, data->stop);
}
static void
mmc_omap_end_of_data(struct mmc_omap_host *host, struct mmc_data *data)
{
unsigned long flags;
int done;
if (!host->dma_in_use) {
mmc_omap_xfer_done(host, data);
return;
}
done = 0;
spin_lock_irqsave(&host->dma_lock, flags);
if (host->dma_done)
done = 1;
else
host->brs_received = 1;
spin_unlock_irqrestore(&host->dma_lock, flags);
if (done)
mmc_omap_xfer_done(host, data);
}
static void
mmc_omap_dma_timer(unsigned long data)
{
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
BUG_ON(host->dma_ch < 0);
omap_free_dma(host->dma_ch);
host->dma_ch = -1;
}
static void
mmc_omap_dma_done(struct mmc_omap_host *host, struct mmc_data *data)
{
unsigned long flags;
int done;
done = 0;
spin_lock_irqsave(&host->dma_lock, flags);
if (host->brs_received)
done = 1;
else
host->dma_done = 1;
spin_unlock_irqrestore(&host->dma_lock, flags);
if (done)
mmc_omap_xfer_done(host, data);
}
static void
mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd)
{
host->cmd = NULL;
if (cmd->flags & MMC_RSP_PRESENT) {
if (cmd->flags & MMC_RSP_136) {
/* response type 2 */
cmd->resp[3] =
OMAP_MMC_READ(host->base, RSP0) |
(OMAP_MMC_READ(host->base, RSP1) << 16);
cmd->resp[2] =
OMAP_MMC_READ(host->base, RSP2) |
(OMAP_MMC_READ(host->base, RSP3) << 16);
cmd->resp[1] =
OMAP_MMC_READ(host->base, RSP4) |
(OMAP_MMC_READ(host->base, RSP5) << 16);
cmd->resp[0] =
OMAP_MMC_READ(host->base, RSP6) |
(OMAP_MMC_READ(host->base, RSP7) << 16);
} else {
/* response types 1, 1b, 3, 4, 5, 6 */
cmd->resp[0] =
OMAP_MMC_READ(host->base, RSP6) |
(OMAP_MMC_READ(host->base, RSP7) << 16);
}
}
if (host->data == NULL || cmd->error != MMC_ERR_NONE) {
host->mrq = NULL;
clk_disable(host->fclk);
mmc_request_done(host->mmc, cmd->mrq);
}
}
/* PIO only */
static void
mmc_omap_sg_to_buf(struct mmc_omap_host *host)
{
struct scatterlist *sg;
sg = host->data->sg + host->sg_idx;
host->buffer_bytes_left = sg->length;
host->buffer = page_address(sg->page) + sg->offset;
if (host->buffer_bytes_left > host->total_bytes_left)
host->buffer_bytes_left = host->total_bytes_left;
}
/* PIO only */
static void
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
{
int n;
if (host->buffer_bytes_left == 0) {
host->sg_idx++;
BUG_ON(host->sg_idx == host->sg_len);
mmc_omap_sg_to_buf(host);
}
n = 64;
if (n > host->buffer_bytes_left)
n = host->buffer_bytes_left;
host->buffer_bytes_left -= n;
host->total_bytes_left -= n;
host->data->bytes_xfered += n;
if (write) {
__raw_writesw(host->base + OMAP_MMC_REG_DATA, host->buffer, n);
} else {
__raw_readsw(host->base + OMAP_MMC_REG_DATA, host->buffer, n);
}
}
static inline void mmc_omap_report_irq(u16 status)
{
static const char *mmc_omap_status_bits[] = {
"EOC", "CD", "CB", "BRS", "EOFB", "DTO", "DCRC", "CTO",
"CCRC", "CRW", "AF", "AE", "OCRB", "CIRQ", "CERR"
};
int i, c = 0;
for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++)
if (status & (1 << i)) {
if (c)
printk(" ");
printk("%s", mmc_omap_status_bits[i]);
c++;
}
}
static irqreturn_t mmc_omap_irq(int irq, void *dev_id)
{
struct mmc_omap_host * host = (struct mmc_omap_host *)dev_id;
u16 status;
int end_command;
int end_transfer;
int transfer_error;
if (host->cmd == NULL && host->data == NULL) {
status = OMAP_MMC_READ(host->base, STAT);
dev_info(mmc_dev(host->mmc),"spurious irq 0x%04x\n", status);
if (status != 0) {
OMAP_MMC_WRITE(host->base, STAT, status);
OMAP_MMC_WRITE(host->base, IE, 0);
}
return IRQ_HANDLED;
}
end_command = 0;
end_transfer = 0;
transfer_error = 0;
while ((status = OMAP_MMC_READ(host->base, STAT)) != 0) {
OMAP_MMC_WRITE(host->base, STAT, status);
#ifdef CONFIG_MMC_DEBUG
dev_dbg(mmc_dev(host->mmc), "MMC IRQ %04x (CMD %d): ",
status, host->cmd != NULL ? host->cmd->opcode : -1);
mmc_omap_report_irq(status);
printk("\n");
#endif
if (host->total_bytes_left) {
if ((status & OMAP_MMC_STAT_A_FULL) ||
(status & OMAP_MMC_STAT_END_OF_DATA))
mmc_omap_xfer_data(host, 0);
if (status & OMAP_MMC_STAT_A_EMPTY)
mmc_omap_xfer_data(host, 1);
}
if (status & OMAP_MMC_STAT_END_OF_DATA) {
end_transfer = 1;
}
if (status & OMAP_MMC_STAT_DATA_TOUT) {
dev_dbg(mmc_dev(host->mmc), "data timeout\n");
if (host->data) {
host->data->error |= MMC_ERR_TIMEOUT;
transfer_error = 1;
}
}
if (status & OMAP_MMC_STAT_DATA_CRC) {
if (host->data) {
host->data->error |= MMC_ERR_BADCRC;
dev_dbg(mmc_dev(host->mmc),
"data CRC error, bytes left %d\n",
host->total_bytes_left);
transfer_error = 1;
} else {
dev_dbg(mmc_dev(host->mmc), "data CRC error\n");
}
}
if (status & OMAP_MMC_STAT_CMD_TOUT) {
/* Timeouts are routine with some commands */
if (host->cmd) {
if (host->cmd->opcode != MMC_ALL_SEND_CID &&
host->cmd->opcode !=
MMC_SEND_OP_COND &&
host->cmd->opcode !=
MMC_APP_CMD &&
!mmc_omap_cover_is_open(host))
dev_err(mmc_dev(host->mmc),
"command timeout, CMD %d\n",
host->cmd->opcode);
host->cmd->error = MMC_ERR_TIMEOUT;
end_command = 1;
}
}
if (status & OMAP_MMC_STAT_CMD_CRC) {
if (host->cmd) {
dev_err(mmc_dev(host->mmc),
"command CRC error (CMD%d, arg 0x%08x)\n",
host->cmd->opcode, host->cmd->arg);
host->cmd->error = MMC_ERR_BADCRC;
end_command = 1;
} else
dev_err(mmc_dev(host->mmc),
"command CRC error without cmd?\n");
}
if (status & OMAP_MMC_STAT_CARD_ERR) {
if (host->cmd && host->cmd->opcode == MMC_STOP_TRANSMISSION) {
u32 response = OMAP_MMC_READ(host->base, RSP6)
| (OMAP_MMC_READ(host->base, RSP7) << 16);
/* STOP sometimes sets must-ignore bits */
if (!(response & (R1_CC_ERROR
| R1_ILLEGAL_COMMAND
| R1_COM_CRC_ERROR))) {
end_command = 1;
continue;
}
}
dev_dbg(mmc_dev(host->mmc), "card status error (CMD%d)\n",
host->cmd->opcode);
if (host->cmd) {
host->cmd->error = MMC_ERR_FAILED;
end_command = 1;
}
if (host->data) {
host->data->error = MMC_ERR_FAILED;
transfer_error = 1;
}
}
/*
* NOTE: On 1610 the END_OF_CMD may come too early when
* starting a write
*/
if ((status & OMAP_MMC_STAT_END_OF_CMD) &&
(!(status & OMAP_MMC_STAT_A_EMPTY))) {
end_command = 1;
}
}
if (end_command) {
mmc_omap_cmd_done(host, host->cmd);
}
if (transfer_error)
mmc_omap_xfer_done(host, host->data);
else if (end_transfer)
mmc_omap_end_of_data(host, host->data);
return IRQ_HANDLED;
}
static irqreturn_t mmc_omap_switch_irq(int irq, void *dev_id)
{
struct mmc_omap_host *host = (struct mmc_omap_host *) dev_id;
schedule_work(&host->switch_work);
return IRQ_HANDLED;
}
static void mmc_omap_switch_timer(unsigned long arg)
{
struct mmc_omap_host *host = (struct mmc_omap_host *) arg;
schedule_work(&host->switch_work);
}
/* FIXME: Handle card insertion and removal properly. Maybe use a mask
* for MMC state? */
static void mmc_omap_switch_callback(unsigned long data, u8 mmc_mask)
{
}
static void mmc_omap_switch_handler(void *data)
{
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
struct mmc_card *card;
static int complained = 0;
int cards = 0, cover_open;
if (host->switch_pin == -1)
return;
cover_open = mmc_omap_cover_is_open(host);
if (cover_open != host->switch_last_state) {
kobject_uevent(&host->dev->kobj, KOBJ_CHANGE);
host->switch_last_state = cover_open;
}
mmc_detect_change(host->mmc, 0);
list_for_each_entry(card, &host->mmc->cards, node) {
if (mmc_card_present(card))
cards++;
}
if (mmc_omap_cover_is_open(host)) {
if (!complained) {
dev_info(mmc_dev(host->mmc), "cover is open");
complained = 1;
}
if (mmc_omap_enable_poll)
mod_timer(&host->switch_timer, jiffies +
msecs_to_jiffies(OMAP_MMC_SWITCH_POLL_DELAY));
} else {
complained = 0;
}
}
/* Prepare to transfer the next segment of a scatterlist */
static void
mmc_omap_prepare_dma(struct mmc_omap_host *host, struct mmc_data *data)
{
int dma_ch = host->dma_ch;
unsigned long data_addr;
u16 buf, frame;
u32 count;
struct scatterlist *sg = &data->sg[host->sg_idx];
int src_port = 0;
int dst_port = 0;
int sync_dev = 0;
data_addr = io_v2p((u32) host->base) + OMAP_MMC_REG_DATA;
frame = data->blksz;
count = sg_dma_len(sg);
if ((data->blocks == 1) && (count > data->blksz))
count = frame;
host->dma_len = count;
/* FIFO is 16x2 bytes on 15xx, and 32x2 bytes on 16xx and 24xx.
* Use 16 or 32 word frames when the blocksize is at least that large.
* Blocksize is usually 512 bytes; but not for some SD reads.
*/
if (cpu_is_omap15xx() && frame > 32)
frame = 32;
else if (frame > 64)
frame = 64;
count /= frame;
frame >>= 1;
if (!(data->flags & MMC_DATA_WRITE)) {
buf = 0x800f | ((frame - 1) << 8);
if (cpu_class_is_omap1()) {
src_port = OMAP_DMA_PORT_TIPB;
dst_port = OMAP_DMA_PORT_EMIFF;
}
if (cpu_is_omap24xx())
sync_dev = OMAP24XX_DMA_MMC1_RX;
omap_set_dma_src_params(dma_ch, src_port,
OMAP_DMA_AMODE_CONSTANT,
data_addr, 0, 0);
omap_set_dma_dest_params(dma_ch, dst_port,
OMAP_DMA_AMODE_POST_INC,
sg_dma_address(sg), 0, 0);
omap_set_dma_dest_data_pack(dma_ch, 1);
omap_set_dma_dest_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4);
} else {
buf = 0x0f80 | ((frame - 1) << 0);
if (cpu_class_is_omap1()) {
src_port = OMAP_DMA_PORT_EMIFF;
dst_port = OMAP_DMA_PORT_TIPB;
}
if (cpu_is_omap24xx())
sync_dev = OMAP24XX_DMA_MMC1_TX;
omap_set_dma_dest_params(dma_ch, dst_port,
OMAP_DMA_AMODE_CONSTANT,
data_addr, 0, 0);
omap_set_dma_src_params(dma_ch, src_port,
OMAP_DMA_AMODE_POST_INC,
sg_dma_address(sg), 0, 0);
omap_set_dma_src_data_pack(dma_ch, 1);
omap_set_dma_src_burst_mode(dma_ch, OMAP_DMA_DATA_BURST_4);
}
/* Max limit for DMA frame count is 0xffff */
if (unlikely(count > 0xffff))
BUG();
OMAP_MMC_WRITE(host->base, BUF, buf);
omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S16,
frame, count, OMAP_DMA_SYNC_FRAME,
sync_dev, 0);
}
/* A scatterlist segment completed */
static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
{
struct mmc_omap_host *host = (struct mmc_omap_host *) data;
struct mmc_data *mmcdat = host->data;
if (unlikely(host->dma_ch < 0)) {
dev_err(mmc_dev(host->mmc),
"DMA callback while DMA not enabled\n");
return;
}
/* FIXME: We really should do something to _handle_ the errors */
if (ch_status & OMAP1_DMA_TOUT_IRQ) {
dev_err(mmc_dev(host->mmc),"DMA timeout\n");
return;
}
if (ch_status & OMAP_DMA_DROP_IRQ) {
dev_err(mmc_dev(host->mmc), "DMA sync error\n");
return;
}
if (!(ch_status & OMAP_DMA_BLOCK_IRQ)) {
return;
}
mmcdat->bytes_xfered += host->dma_len;
host->sg_idx++;
if (host->sg_idx < host->sg_len) {
mmc_omap_prepare_dma(host, host->data);
omap_start_dma(host->dma_ch);
} else
mmc_omap_dma_done(host, host->data);
}
static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data *data)
{
const char *dev_name;
int sync_dev, dma_ch, is_read, r;
is_read = !(data->flags & MMC_DATA_WRITE);
del_timer_sync(&host->dma_timer);
if (host->dma_ch >= 0) {
if (is_read == host->dma_is_read)
return 0;
omap_free_dma(host->dma_ch);
host->dma_ch = -1;
}
if (is_read) {
if (host->id == 1) {
sync_dev = OMAP_DMA_MMC_RX;
dev_name = "MMC1 read";
} else {
sync_dev = OMAP_DMA_MMC2_RX;
dev_name = "MMC2 read";
}
} else {
if (host->id == 1) {
sync_dev = OMAP_DMA_MMC_TX;
dev_name = "MMC1 write";
} else {
sync_dev = OMAP_DMA_MMC2_TX;
dev_name = "MMC2 write";
}
}
r = omap_request_dma(sync_dev, dev_name, mmc_omap_dma_cb,
host, &dma_ch);
if (r != 0) {
dev_dbg(mmc_dev(host->mmc), "omap_request_dma() failed with %d\n", r);
return r;
}
host->dma_ch = dma_ch;
host->dma_is_read = is_read;
return 0;
}
static inline void set_cmd_timeout(struct mmc_omap_host *host, struct mmc_request *req)
{
u16 reg;
reg = OMAP_MMC_READ(host->base, SDIO);
reg &= ~(1 << 5);
OMAP_MMC_WRITE(host->base, SDIO, reg);
/* Set maximum timeout */
OMAP_MMC_WRITE(host->base, CTO, 0xff);
}
static inline void set_data_timeout(struct mmc_omap_host *host, struct mmc_request *req)
{
int timeout;
u16 reg;
/* Convert ns to clock cycles by assuming 20MHz frequency
* 1 cycle at 20MHz = 500 ns
*/
timeout = req->data->timeout_clks + req->data->timeout_ns / 500;
/* Check if we need to use timeout multiplier register */
reg = OMAP_MMC_READ(host->base, SDIO);
if (timeout > 0xffff) {
reg |= (1 << 5);
timeout /= 1024;
} else
reg &= ~(1 << 5);
OMAP_MMC_WRITE(host->base, SDIO, reg);
OMAP_MMC_WRITE(host->base, DTO, timeout);
}
static void
mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req)
{
struct mmc_data *data = req->data;
int i, use_dma, block_size;
unsigned sg_len;
host->data = data;
if (data == NULL) {
OMAP_MMC_WRITE(host->base, BLEN, 0);
OMAP_MMC_WRITE(host->base, NBLK, 0);
OMAP_MMC_WRITE(host->base, BUF, 0);
host->dma_in_use = 0;
set_cmd_timeout(host, req);
return;
}
block_size = data->blksz;
OMAP_MMC_WRITE(host->base, NBLK, data->blocks - 1);
OMAP_MMC_WRITE(host->base, BLEN, block_size - 1);
set_data_timeout(host, req);
/* cope with calling layer confusion; it issues "single
* block" writes using multi-block scatterlists.
*/
sg_len = (data->blocks == 1) ? 1 : data->sg_len;
/* Only do DMA for entire blocks */
use_dma = host->use_dma;
if (use_dma) {
for (i = 0; i < sg_len; i++) {
if ((data->sg[i].length % block_size) != 0) {
use_dma = 0;
break;
}
}
}
host->sg_idx = 0;
if (use_dma) {
if (mmc_omap_get_dma_channel(host, data) == 0) {
enum dma_data_direction dma_data_dir;
if (data->flags & MMC_DATA_WRITE)
dma_data_dir = DMA_TO_DEVICE;
else
dma_data_dir = DMA_FROM_DEVICE;
host->sg_len = dma_map_sg(mmc_dev(host->mmc), data->sg,
sg_len, dma_data_dir);
host->total_bytes_left = 0;
mmc_omap_prepare_dma(host, req->data);
host->brs_received = 0;
host->dma_done = 0;
host->dma_in_use = 1;
} else
use_dma = 0;
}
/* Revert to PIO? */
if (!use_dma) {
OMAP_MMC_WRITE(host->base, BUF, 0x1f1f);
host->total_bytes_left = data->blocks * block_size;
host->sg_len = sg_len;
mmc_omap_sg_to_buf(host);
host->dma_in_use = 0;
}
}
static void mmc_omap_request(struct mmc_host *mmc, struct mmc_request *req)
{
struct mmc_omap_host *host = mmc_priv(mmc);
WARN_ON(host->mrq != NULL);
host->mrq = req;
/* only touch fifo AFTER the controller readies it */
mmc_omap_prepare_data(host, req);
mmc_omap_start_command(host, req->cmd);
if (host->dma_in_use)
omap_start_dma(host->dma_ch);
}
static void innovator_fpga_socket_power(int on)
{
#if defined(CONFIG_MACH_OMAP_INNOVATOR) && defined(CONFIG_ARCH_OMAP15XX)
if (on) {
fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
OMAP1510_FPGA_POWER);
} else {
fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
OMAP1510_FPGA_POWER);
}
#endif
}
/*
* Turn the socket power on/off. Innovator uses FPGA, most boards
* probably use GPIO.
*/
static void mmc_omap_power(struct mmc_omap_host *host, int on)
{
if (on) {
if (machine_is_omap_innovator())
innovator_fpga_socket_power(1);
else if (machine_is_omap_h2())
tps65010_set_gpio_out_value(GPIO3, HIGH);
else if (machine_is_omap_h3())
/* GPIO 4 of TPS65010 sends SD_EN signal */
tps65010_set_gpio_out_value(GPIO4, HIGH);
else if (cpu_is_omap24xx()) {
u16 reg = OMAP_MMC_READ(host->base, CON);
OMAP_MMC_WRITE(host->base, CON, reg | (1 << 11));
} else
if (host->power_pin >= 0)
omap_set_gpio_dataout(host->power_pin, 1);
} else {
if (machine_is_omap_innovator())
innovator_fpga_socket_power(0);
else if (machine_is_omap_h2())
tps65010_set_gpio_out_value(GPIO3, LOW);
else if (machine_is_omap_h3())
tps65010_set_gpio_out_value(GPIO4, LOW);
else if (cpu_is_omap24xx()) {
u16 reg = OMAP_MMC_READ(host->base, CON);
OMAP_MMC_WRITE(host->base, CON, reg & ~(1 << 11));
} else
if (host->power_pin >= 0)
omap_set_gpio_dataout(host->power_pin, 0);
}
}
static void mmc_omap_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmc_omap_host *host = mmc_priv(mmc);
int dsor;
int realclock, i;
realclock = ios->clock;
if (ios->clock == 0)
dsor = 0;
else {
int func_clk_rate = clk_get_rate(host->fclk);
dsor = func_clk_rate / realclock;
if (dsor < 1)
dsor = 1;
if (func_clk_rate / dsor > realclock)
dsor++;
if (dsor > 250)
dsor = 250;
dsor++;
if (ios->bus_width == MMC_BUS_WIDTH_4)
dsor |= 1 << 15;
}
switch (ios->power_mode) {
case MMC_POWER_OFF:
mmc_omap_power(host, 0);
break;
case MMC_POWER_UP:
case MMC_POWER_ON:
mmc_omap_power(host, 1);
dsor |= 1<<11;
break;
}
host->bus_mode = ios->bus_mode;
host->hw_bus_mode = host->bus_mode;
clk_enable(host->fclk);
/* On insanely high arm_per frequencies something sometimes
* goes somehow out of sync, and the POW bit is not being set,
* which results in the while loop below getting stuck.
* Writing to the CON register twice seems to do the trick. */
for (i = 0; i < 2; i++)
OMAP_MMC_WRITE(host->base, CON, dsor);
if (ios->power_mode == MMC_POWER_UP) {
/* Send clock cycles, poll completion */
OMAP_MMC_WRITE(host->base, IE, 0);
OMAP_MMC_WRITE(host->base, STAT, 0xffff);
OMAP_MMC_WRITE(host->base, CMD, 1<<7);
while (0 == (OMAP_MMC_READ(host->base, STAT) & 1));
OMAP_MMC_WRITE(host->base, STAT, 1);
}
clk_disable(host->fclk);
}
static int mmc_omap_get_ro(struct mmc_host *mmc)
{
struct mmc_omap_host *host = mmc_priv(mmc);
return host->wp_pin && omap_get_gpio_datain(host->wp_pin);
}
static struct mmc_host_ops mmc_omap_ops = {
.request = mmc_omap_request,
.set_ios = mmc_omap_set_ios,
.get_ro = mmc_omap_get_ro,
};
static int __init mmc_omap_probe(struct platform_device *pdev)
{
struct omap_mmc_conf *minfo = pdev->dev.platform_data;
struct mmc_host *mmc;
struct mmc_omap_host *host = NULL;
struct resource *r;
int ret = 0;
int irq;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!r || irq < 0)
return -ENXIO;
r = request_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1,
pdev->name);
if (!r)
return -EBUSY;
mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
goto out;
}
host = mmc_priv(mmc);
host->mmc = mmc;
spin_lock_init(&host->dma_lock);
init_timer(&host->dma_timer);
host->dma_timer.function = mmc_omap_dma_timer;
host->dma_timer.data = (unsigned long) host;
host->id = pdev->id;
host->res = r;
host->irq = irq;
if (cpu_is_omap24xx()) {
host->iclk = clk_get(&pdev->dev, "mmc_ick");
if (IS_ERR(host->iclk))
goto out;
clk_enable(host->iclk);
}
if (!cpu_is_omap24xx())
host->fclk = clk_get(&pdev->dev, "mmc_ck");
else
host->fclk = clk_get(&pdev->dev, "mmc_fck");
if (IS_ERR(host->fclk)) {
ret = PTR_ERR(host->fclk);
goto out;
}
/* REVISIT:
* Also, use minfo->cover to decide how to manage
* the card detect sensing.
*/
host->power_pin = minfo->power_pin;
host->switch_pin = minfo->switch_pin;
host->wp_pin = minfo->wp_pin;
host->use_dma = 1;
host->dma_ch = -1;
host->irq = pdev->resource[1].start;
host->base = (void __iomem*)IO_ADDRESS(r->start);
mmc->ops = &mmc_omap_ops;
mmc->f_min = 400000;
mmc->f_max = 24000000;
mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34;
mmc->caps = MMC_CAP_BYTEBLOCK;
if (minfo->wire4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
/* Use scatterlist DMA to reduce per-transfer costs.
* NOTE max_seg_size assumption that small blocks aren't
* normally used (except e.g. for reading SD registers).
*/
mmc->max_phys_segs = 32;
mmc->max_hw_segs = 32;
mmc->max_sectors = 256; /* NBLK max 11-bits, OMAP also limited by DMA */
mmc->max_seg_size = mmc->max_sectors * 512;
if (host->power_pin >= 0) {
if ((ret = omap_request_gpio(host->power_pin)) != 0) {
dev_err(mmc_dev(host->mmc),
"Unable to get GPIO pin for MMC power\n");
goto out;
}
omap_set_gpio_direction(host->power_pin, 0);
}
ret = request_irq(host->irq, mmc_omap_irq, 0, DRIVER_NAME, host);
if (ret)
goto out;
host->dev = &pdev->dev;
platform_set_drvdata(pdev, host);
mmc_add_host(mmc);
if (host->switch_pin >= 0) {
INIT_WORK(&host->switch_work, mmc_omap_switch_handler, host);
init_timer(&host->switch_timer);
host->switch_timer.function = mmc_omap_switch_timer;
host->switch_timer.data = (unsigned long) host;
if (omap_request_gpio(host->switch_pin) != 0) {
dev_warn(mmc_dev(host->mmc), "Unable to get GPIO pin for MMC cover switch\n");
host->switch_pin = -1;
goto no_switch;
}
omap_set_gpio_direction(host->switch_pin, 1);
ret = request_irq(OMAP_GPIO_IRQ(host->switch_pin),
mmc_omap_switch_irq, IRQF_TRIGGER_RISING, DRIVER_NAME, host);
if (ret) {
dev_warn(mmc_dev(host->mmc), "Unable to get IRQ for MMC cover switch\n");
omap_free_gpio(host->switch_pin);
host->switch_pin = -1;
goto no_switch;
}
ret = device_create_file(&pdev->dev, &dev_attr_cover_switch);
if (ret == 0) {
ret = device_create_file(&pdev->dev, &dev_attr_enable_poll);
if (ret != 0)
device_remove_file(&pdev->dev, &dev_attr_cover_switch);
}
if (ret) {
dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
omap_free_gpio(host->switch_pin);
host->switch_pin = -1;
goto no_switch;
}
if (mmc_omap_enable_poll && mmc_omap_cover_is_open(host))
schedule_work(&host->switch_work);
}
no_switch:
return 0;
out:
/* FIXME: Free other resources too. */
if (host) {
if (host->iclk && !IS_ERR(host->iclk))
clk_put(host->iclk);
if (host->fclk && !IS_ERR(host->fclk))
clk_put(host->fclk);
mmc_free_host(host->mmc);
}
return ret;
}
static int mmc_omap_remove(struct platform_device *pdev)
{
struct mmc_omap_host *host = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
if (host) {
mmc_remove_host(host->mmc);
free_irq(host->irq, host);
if (host->power_pin >= 0)
omap_free_gpio(host->power_pin);
if (host->switch_pin >= 0) {
device_remove_file(&pdev->dev, &dev_attr_enable_poll);
device_remove_file(&pdev->dev, &dev_attr_cover_switch);
free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
omap_free_gpio(host->switch_pin);
host->switch_pin = -1;
del_timer_sync(&host->switch_timer);
flush_scheduled_work();
}
if (host->iclk && !IS_ERR(host->iclk))
clk_put(host->iclk);
if (host->fclk && !IS_ERR(host->fclk))
clk_put(host->fclk);
mmc_free_host(host->mmc);
}
release_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1);
return 0;
}
#ifdef CONFIG_PM
static int mmc_omap_suspend(struct platform_device *pdev, pm_message_t mesg)
{
int ret = 0;
struct mmc_omap_host *host = platform_get_drvdata(pdev);
if (host && host->suspended)
return 0;
if (host) {
ret = mmc_suspend_host(host->mmc, mesg);
if (ret == 0)
host->suspended = 1;
}
return ret;
}
static int mmc_omap_resume(struct platform_device *pdev)
{
int ret = 0;
struct mmc_omap_host *host = platform_get_drvdata(pdev);
if (host && !host->suspended)
return 0;
if (host) {
ret = mmc_resume_host(host->mmc);
if (ret == 0)
host->suspended = 0;
}
return ret;
}
#else
#define mmc_omap_suspend NULL
#define mmc_omap_resume NULL
#endif
static struct platform_driver mmc_omap_driver = {
.probe = mmc_omap_probe,
.remove = mmc_omap_remove,
.suspend = mmc_omap_suspend,
.resume = mmc_omap_resume,
.driver = {
.name = DRIVER_NAME,
},
};
static int __init mmc_omap_init(void)
{
return platform_driver_register(&mmc_omap_driver);
}
static void __exit mmc_omap_exit(void)
{
platform_driver_unregister(&mmc_omap_driver);
}
module_init(mmc_omap_init);
module_exit(mmc_omap_exit);
MODULE_DESCRIPTION("OMAP Multimedia Card driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS(DRIVER_NAME);
MODULE_AUTHOR("Juha Yrjölä");