korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-26 13:44:15 +08:00
Code Issues Packages Projects Releases Wiki Activity
a58183138c
linux/arch/powerpc/kernel/entry_64.S
Michael Ellerman ee13cb249f powerpc/64s: Add support for software count cache flush 
Some CPU revisions support a mode where the count cache needs to be
flushed by software on context switch. Additionally some revisions may
have a hardware accelerated flush, in which case the software flush
sequence can be shortened.

If we detect the appropriate flag from firmware we patch a branch
into _switch() which takes us to a count cache flush sequence.

That sequence in turn may be patched to return early if we detect that
the CPU supports accelerating the flush sequence in hardware.

Add debugfs support for reporting the state of the flush, as well as
runtime disabling it.

And modify the spectre_v2 sysfs file to report the state of the
software flush.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-08-08 00:32:26 +10:00

1326 lines
31 KiB
ArmAsm
Raw Blame History

/*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
* Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
* Adapted for Power Macintosh by Paul Mackerras.
* Low-level exception handlers and MMU support
* rewritten by Paul Mackerras.
* Copyright (C) 1996 Paul Mackerras.
* MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
*
* This file contains the system call entry code, context switch
* code, and exception/interrupt return code for PowerPC.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/errno.h>
#include <linux/err.h>
#include <asm/unistd.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/thread_info.h>
#include <asm/code-patching-asm.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/firmware.h>
#include <asm/bug.h>
#include <asm/ptrace.h>
#include <asm/irqflags.h>
#include <asm/hw_irq.h>
#include <asm/context_tracking.h>
#include <asm/tm.h>
#include <asm/ppc-opcode.h>
#include <asm/barrier.h>
#include <asm/export.h>
#include <asm/asm-compat.h>
#ifdef CONFIG_PPC_BOOK3S
#include <asm/exception-64s.h>
#else
#include <asm/exception-64e.h>
#endif
#include <asm/feature-fixups.h>
/*
* System calls.
*/
.section ".toc","aw"
SYS_CALL_TABLE:
.tc sys_call_table[TC],sys_call_table
/* This value is used to mark exception frames on the stack. */
exception_marker:
.tc ID_EXC_MARKER[TC],STACK_FRAME_REGS_MARKER
.section ".text"
.align 7
.globl system_call_common
system_call_common:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BEGIN_FTR_SECTION
extrdi. r10, r12, 1, (63-MSR_TS_T_LG) /* transaction active? */
bne .Ltabort_syscall
END_FTR_SECTION_IFSET(CPU_FTR_TM)
#endif
andi. r10,r12,MSR_PR
mr r10,r1
addi r1,r1,-INT_FRAME_SIZE
beq- 1f
ld r1,PACAKSAVE(r13)
1: std r10,0(r1)
std r11,_NIP(r1)
std r12,_MSR(r1)
std r0,GPR0(r1)
std r10,GPR1(r1)
beq 2f /* if from kernel mode */
ACCOUNT_CPU_USER_ENTRY(r13, r10, r11)
2: std r2,GPR2(r1)
std r3,GPR3(r1)
mfcr r2
std r4,GPR4(r1)
std r5,GPR5(r1)
std r6,GPR6(r1)
std r7,GPR7(r1)
std r8,GPR8(r1)
li r11,0
std r11,GPR9(r1)
std r11,GPR10(r1)
std r11,GPR11(r1)
std r11,GPR12(r1)
std r11,_XER(r1)
std r11,_CTR(r1)
std r9,GPR13(r1)
mflr r10
/*
* This clears CR0.SO (bit 28), which is the error indication on
* return from this system call.
*/
rldimi r2,r11,28,(63-28)
li r11,0xc01
std r10,_LINK(r1)
std r11,_TRAP(r1)
std r3,ORIG_GPR3(r1)
std r2,_CCR(r1)
ld r2,PACATOC(r13)
addi r9,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
#if defined(CONFIG_VIRT_CPU_ACCOUNTING_NATIVE) && defined(CONFIG_PPC_SPLPAR)
BEGIN_FW_FTR_SECTION
beq 33f
/* if from user, see if there are any DTL entries to process */
ld r10,PACALPPACAPTR(r13) /* get ptr to VPA */
ld r11,PACA_DTL_RIDX(r13) /* get log read index */
addi r10,r10,LPPACA_DTLIDX
LDX_BE r10,0,r10 /* get log write index */
cmpd cr1,r11,r10
beq+ cr1,33f
bl accumulate_stolen_time
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
addi r9,r1,STACK_FRAME_OVERHEAD
33:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
#endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE && CONFIG_PPC_SPLPAR */
/*
* A syscall should always be called with interrupts enabled
* so we just unconditionally hard-enable here. When some kind
* of irq tracing is used, we additionally check that condition
* is correct
*/
#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
lbz r10,PACAIRQSOFTMASK(r13)
1: tdnei r10,IRQS_ENABLED
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
#ifdef CONFIG_PPC_BOOK3E
wrteei 1
#else
li r11,MSR_RI
ori r11,r11,MSR_EE
mtmsrd r11,1
#endif /* CONFIG_PPC_BOOK3E */
system_call: /* label this so stack traces look sane */
/* We do need to set SOFTE in the stack frame or the return
* from interrupt will be painful
*/
li r10,IRQS_ENABLED
std r10,SOFTE(r1)
CURRENT_THREAD_INFO(r11, r1)
ld r10,TI_FLAGS(r11)
andi. r11,r10,_TIF_SYSCALL_DOTRACE
bne .Lsyscall_dotrace /* does not return */
cmpldi 0,r0,NR_syscalls
bge- .Lsyscall_enosys
.Lsyscall:
/*
* Need to vector to 32 Bit or default sys_call_table here,
* based on caller's run-mode / personality.
*/
ld r11,SYS_CALL_TABLE@toc(2)
andi. r10,r10,_TIF_32BIT
beq 15f
addi r11,r11,8 /* use 32-bit syscall entries */
clrldi r3,r3,32
clrldi r4,r4,32
clrldi r5,r5,32
clrldi r6,r6,32
clrldi r7,r7,32
clrldi r8,r8,32
15:
slwi r0,r0,4
barrier_nospec_asm
/*
* Prevent the load of the handler below (based on the user-passed
* system call number) being speculatively executed until the test
* against NR_syscalls and branch to .Lsyscall_enosys above has
* committed.
*/
ldx r12,r11,r0 /* Fetch system call handler [ptr] */
mtctr r12
bctrl /* Call handler */
.Lsyscall_exit:
std r3,RESULT(r1)
#ifdef CONFIG_DEBUG_RSEQ
/* Check whether the syscall is issued inside a restartable sequence */
addi r3,r1,STACK_FRAME_OVERHEAD
bl rseq_syscall
ld r3,RESULT(r1)
#endif
CURRENT_THREAD_INFO(r12, r1)
ld r8,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3S
/* No MSR:RI on BookE */
andi. r10,r8,MSR_RI
beq- .Lunrecov_restore
#endif
/*
* This is a few instructions into the actual syscall exit path (which actually
* starts at .Lsyscall_exit) to cater to kprobe blacklisting and to reduce the
* number of visible symbols for profiling purposes.
*
* We can probe from system_call until this point as MSR_RI is set. But once it
* is cleared below, we won't be able to take a trap.
*
* This is blacklisted from kprobes further below with _ASM_NOKPROBE_SYMBOL().
*/
system_call_exit:
/*
* Disable interrupts so current_thread_info()->flags can't change,
* and so that we don't get interrupted after loading SRR0/1.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
/*
* For performance reasons we clear RI the same time that we
* clear EE. We only need to clear RI just before we restore r13
* below, but batching it with EE saves us one expensive mtmsrd call.
* We have to be careful to restore RI if we branch anywhere from
* here (eg syscall_exit_work).
*/
li r11,0
mtmsrd r11,1
#endif /* CONFIG_PPC_BOOK3E */
ld r9,TI_FLAGS(r12)
li r11,-MAX_ERRNO
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP|_TIF_USER_WORK_MASK|_TIF_PERSYSCALL_MASK)
bne- .Lsyscall_exit_work
andi. r0,r8,MSR_FP
beq 2f
#ifdef CONFIG_ALTIVEC
andis. r0,r8,MSR_VEC@h
bne 3f
#endif
2: addi r3,r1,STACK_FRAME_OVERHEAD
#ifdef CONFIG_PPC_BOOK3S
li r10,MSR_RI
mtmsrd r10,1 /* Restore RI */
#endif
bl restore_math
#ifdef CONFIG_PPC_BOOK3S
li r11,0
mtmsrd r11,1
#endif
ld r8,_MSR(r1)
ld r3,RESULT(r1)
li r11,-MAX_ERRNO
3: cmpld r3,r11
ld r5,_CCR(r1)
bge- .Lsyscall_error
.Lsyscall_error_cont:
ld r7,_NIP(r1)
BEGIN_FTR_SECTION
stdcx. r0,0,r1 /* to clear the reservation */
END_FTR_SECTION_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
andi. r6,r8,MSR_PR
ld r4,_LINK(r1)
beq- 1f
ACCOUNT_CPU_USER_EXIT(r13, r11, r12)
BEGIN_FTR_SECTION
HMT_MEDIUM_LOW
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ld r13,GPR13(r1) /* only restore r13 if returning to usermode */
ld r2,GPR2(r1)
ld r1,GPR1(r1)
mtlr r4
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
RFI_TO_USER
b . /* prevent speculative execution */
/* exit to kernel */
1: ld r2,GPR2(r1)
ld r1,GPR1(r1)
mtlr r4
mtcr r5
mtspr SPRN_SRR0,r7
mtspr SPRN_SRR1,r8
RFI_TO_KERNEL
b . /* prevent speculative execution */
.Lsyscall_error:
oris r5,r5,0x1000 /* Set SO bit in CR */
neg r3,r3
std r5,_CCR(r1)
b .Lsyscall_error_cont
/* Traced system call support */
.Lsyscall_dotrace:
bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_enter
/*
* We use the return value of do_syscall_trace_enter() as the syscall
* number. If the syscall was rejected for any reason do_syscall_trace_enter()
* returns an invalid syscall number and the test below against
* NR_syscalls will fail.
*/
mr r0,r3
/* Restore argument registers just clobbered and/or possibly changed. */
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r5,GPR5(r1)
ld r6,GPR6(r1)
ld r7,GPR7(r1)
ld r8,GPR8(r1)
/* Repopulate r9 and r10 for the syscall path */
addi r9,r1,STACK_FRAME_OVERHEAD
CURRENT_THREAD_INFO(r10, r1)
ld r10,TI_FLAGS(r10)
cmpldi r0,NR_syscalls
blt+ .Lsyscall
/* Return code is already in r3 thanks to do_syscall_trace_enter() */
b .Lsyscall_exit
.Lsyscall_enosys:
li r3,-ENOSYS
b .Lsyscall_exit
.Lsyscall_exit_work:
#ifdef CONFIG_PPC_BOOK3S
li r10,MSR_RI
mtmsrd r10,1 /* Restore RI */
#endif
/* If TIF_RESTOREALL is set, don't scribble on either r3 or ccr.
If TIF_NOERROR is set, just save r3 as it is. */
andi. r0,r9,_TIF_RESTOREALL
beq+ 0f
REST_NVGPRS(r1)
b 2f
0: cmpld r3,r11 /* r11 is -MAX_ERRNO */
blt+ 1f
andi. r0,r9,_TIF_NOERROR
bne- 1f
ld r5,_CCR(r1)
neg r3,r3
oris r5,r5,0x1000 /* Set SO bit in CR */
std r5,_CCR(r1)
1: std r3,GPR3(r1)
2: andi. r0,r9,(_TIF_PERSYSCALL_MASK)
beq 4f
/* Clear per-syscall TIF flags if any are set. */
li r11,_TIF_PERSYSCALL_MASK
addi r12,r12,TI_FLAGS
3: ldarx r10,0,r12
andc r10,r10,r11
stdcx. r10,0,r12
bne- 3b
subi r12,r12,TI_FLAGS
4: /* Anything else left to do? */
BEGIN_FTR_SECTION
lis r3,INIT_PPR@highest /* Set thread.ppr = 3 */
ld r10,PACACURRENT(r13)
sldi r3,r3,32 /* bits 11-13 are used for ppr */
std r3,TASKTHREADPPR(r10)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
andi. r0,r9,(_TIF_SYSCALL_DOTRACE|_TIF_SINGLESTEP)
beq ret_from_except_lite
/* Re-enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
wrteei 1
#else
li r10,MSR_RI
ori r10,r10,MSR_EE
mtmsrd r10,1
#endif /* CONFIG_PPC_BOOK3E */
bl save_nvgprs
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_syscall_trace_leave
b ret_from_except
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
.Ltabort_syscall:
/* Firstly we need to enable TM in the kernel */
mfmsr r10
li r9, 1
rldimi r10, r9, MSR_TM_LG, 63-MSR_TM_LG
mtmsrd r10, 0
/* tabort, this dooms the transaction, nothing else */
li r9, (TM_CAUSE_SYSCALL|TM_CAUSE_PERSISTENT)
TABORT(R9)
/*
* Return directly to userspace. We have corrupted user register state,
* but userspace will never see that register state. Execution will
* resume after the tbegin of the aborted transaction with the
* checkpointed register state.
*/
li r9, MSR_RI
andc r10, r10, r9
mtmsrd r10, 1
mtspr SPRN_SRR0, r11
mtspr SPRN_SRR1, r12
RFI_TO_USER
b . /* prevent speculative execution */
#endif
_ASM_NOKPROBE_SYMBOL(system_call_common);
_ASM_NOKPROBE_SYMBOL(system_call_exit);
/* Save non-volatile GPRs, if not already saved. */
_GLOBAL(save_nvgprs)
ld r11,_TRAP(r1)
andi. r0,r11,1
beqlr-
SAVE_NVGPRS(r1)
clrrdi r0,r11,1
std r0,_TRAP(r1)
blr
_ASM_NOKPROBE_SYMBOL(save_nvgprs);
/*
* The sigsuspend and rt_sigsuspend system calls can call do_signal
* and thus put the process into the stopped state where we might
* want to examine its user state with ptrace. Therefore we need
* to save all the nonvolatile registers (r14 - r31) before calling
* the C code. Similarly, fork, vfork and clone need the full
* register state on the stack so that it can be copied to the child.
*/
_GLOBAL(ppc_fork)
bl save_nvgprs
bl sys_fork
b .Lsyscall_exit
_GLOBAL(ppc_vfork)
bl save_nvgprs
bl sys_vfork
b .Lsyscall_exit
_GLOBAL(ppc_clone)
bl save_nvgprs
bl sys_clone
b .Lsyscall_exit
_GLOBAL(ppc32_swapcontext)
bl save_nvgprs
bl compat_sys_swapcontext
b .Lsyscall_exit
_GLOBAL(ppc64_swapcontext)
bl save_nvgprs
bl sys_swapcontext
b .Lsyscall_exit
_GLOBAL(ppc_switch_endian)
bl save_nvgprs
bl sys_switch_endian
b .Lsyscall_exit
_GLOBAL(ret_from_fork)
bl schedule_tail
REST_NVGPRS(r1)
li r3,0
b .Lsyscall_exit
_GLOBAL(ret_from_kernel_thread)
bl schedule_tail
REST_NVGPRS(r1)
mtlr r14
mr r3,r15
#ifdef PPC64_ELF_ABI_v2
mr r12,r14
#endif
blrl
li r3,0
b .Lsyscall_exit
#ifdef CONFIG_PPC_BOOK3S_64
#define FLUSH_COUNT_CACHE \
1: nop; \
patch_site 1b, patch__call_flush_count_cache
#define BCCTR_FLUSH .long 0x4c400420
.macro nops number
.rept \number
nop
.endr
.endm
.balign 32
.global flush_count_cache
flush_count_cache:
/* Save LR into r9 */
mflr r9
.rept 64
bl .+4
.endr
b 1f
nops 6
.balign 32
/* Restore LR */
1: mtlr r9
li r9,0x7fff
mtctr r9
BCCTR_FLUSH
2: nop
patch_site 2b patch__flush_count_cache_return
nops 3
.rept 278
.balign 32
BCCTR_FLUSH
nops 7
.endr
blr
#else
#define FLUSH_COUNT_CACHE
#endif /* CONFIG_PPC_BOOK3S_64 */
/*
* This routine switches between two different tasks. The process
* state of one is saved on its kernel stack. Then the state
* of the other is restored from its kernel stack. The memory
* management hardware is updated to the second process's state.
* Finally, we can return to the second process, via ret_from_except.
* On entry, r3 points to the THREAD for the current task, r4
* points to the THREAD for the new task.
*
* Note: there are two ways to get to the "going out" portion
* of this code; either by coming in via the entry (_switch)
* or via "fork" which must set up an environment equivalent
* to the "_switch" path. If you change this you'll have to change
* the fork code also.
*
* The code which creates the new task context is in 'copy_thread'
* in arch/powerpc/kernel/process.c
*/
.align 7
_GLOBAL(_switch)
mflr r0
std r0,16(r1)
stdu r1,-SWITCH_FRAME_SIZE(r1)
/* r3-r13 are caller saved -- Cort */
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
std r0,_NIP(r1) /* Return to switch caller */
mfcr r23
std r23,_CCR(r1)
std r1,KSP(r3) /* Set old stack pointer */
FLUSH_COUNT_CACHE
/*
* On SMP kernels, care must be taken because a task may be
* scheduled off CPUx and on to CPUy. Memory ordering must be
* considered.
*
* Cacheable stores on CPUx will be visible when the task is
* scheduled on CPUy by virtue of the core scheduler barriers
* (see "Notes on Program-Order guarantees on SMP systems." in
* kernel/sched/core.c).
*
* Uncacheable stores in the case of involuntary preemption must
* be taken care of. The smp_mb__before_spin_lock() in __schedule()
* is implemented as hwsync on powerpc, which orders MMIO too. So
* long as there is an hwsync in the context switch path, it will
* be executed on the source CPU after the task has performed
* all MMIO ops on that CPU, and on the destination CPU before the
* task performs any MMIO ops there.
*/
/*
* The kernel context switch path must contain a spin_lock,
* which contains larx/stcx, which will clear any reservation
* of the task being switched.
*/
#ifdef CONFIG_PPC_BOOK3S
/* Cancel all explict user streams as they will have no use after context
* switch and will stop the HW from creating streams itself
*/
DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r6)
#endif
addi r6,r4,-THREAD /* Convert THREAD to 'current' */
std r6,PACACURRENT(r13) /* Set new 'current' */
ld r8,KSP(r4) /* new stack pointer */
#ifdef CONFIG_PPC_BOOK3S_64
BEGIN_MMU_FTR_SECTION
b 2f
END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_RADIX)
BEGIN_FTR_SECTION
clrrdi r6,r8,28 /* get its ESID */
clrrdi r9,r1,28 /* get current sp ESID */
FTR_SECTION_ELSE
clrrdi r6,r8,40 /* get its 1T ESID */
clrrdi r9,r1,40 /* get current sp 1T ESID */
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_1T_SEGMENT)
clrldi. r0,r6,2 /* is new ESID c00000000? */
cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */
cror eq,4*cr1+eq,eq
beq 2f /* if yes, don't slbie it */
/* Bolt in the new stack SLB entry */
ld r7,KSP_VSID(r4) /* Get new stack's VSID */
oris r0,r6,(SLB_ESID_V)@h
ori r0,r0,(SLB_NUM_BOLTED-1)@l
BEGIN_FTR_SECTION
li r9,MMU_SEGSIZE_1T /* insert B field */
oris r6,r6,(MMU_SEGSIZE_1T << SLBIE_SSIZE_SHIFT)@h
rldimi r7,r9,SLB_VSID_SSIZE_SHIFT,0
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
/* Update the last bolted SLB. No write barriers are needed
* here, provided we only update the current CPU's SLB shadow
* buffer.
*/
ld r9,PACA_SLBSHADOWPTR(r13)
li r12,0
std r12,SLBSHADOW_STACKESID(r9) /* Clear ESID */
li r12,SLBSHADOW_STACKVSID
STDX_BE r7,r12,r9 /* Save VSID */
li r12,SLBSHADOW_STACKESID
STDX_BE r0,r12,r9 /* Save ESID */
/* No need to check for MMU_FTR_NO_SLBIE_B here, since when
* we have 1TB segments, the only CPUs known to have the errata
* only support less than 1TB of system memory and we'll never
* actually hit this code path.
*/
isync
slbie r6
slbie r6 /* Workaround POWER5 < DD2.1 issue */
slbmte r7,r0
isync
2:
#endif /* CONFIG_PPC_BOOK3S_64 */
CURRENT_THREAD_INFO(r7, r8) /* base of new stack */
/* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE
because we don't need to leave the 288-byte ABI gap at the
top of the kernel stack. */
addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE
/*
* PMU interrupts in radix may come in here. They will use r1, not
* PACAKSAVE, so this stack switch will not cause a problem. They
* will store to the process stack, which may then be migrated to
* another CPU. However the rq lock release on this CPU paired with
* the rq lock acquire on the new CPU before the stack becomes
* active on the new CPU, will order those stores.
*/
mr r1,r8 /* start using new stack pointer */
std r7,PACAKSAVE(r13)
ld r6,_CCR(r1)
mtcrf 0xFF,r6
/* r3-r13 are destroyed -- Cort */
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
/* convert old thread to its task_struct for return value */
addi r3,r3,-THREAD
ld r7,_NIP(r1) /* Return to _switch caller in new task */
mtlr r7
addi r1,r1,SWITCH_FRAME_SIZE
blr
.align 7
_GLOBAL(ret_from_except)
ld r11,_TRAP(r1)
andi. r0,r11,1
bne ret_from_except_lite
REST_NVGPRS(r1)
_GLOBAL(ret_from_except_lite)
/*
* Disable interrupts so that current_thread_info()->flags
* can't change between when we test it and when we return
* from the interrupt.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
li r10,MSR_RI
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
CURRENT_THREAD_INFO(r9, r1)
ld r3,_MSR(r1)
#ifdef CONFIG_PPC_BOOK3E
ld r10,PACACURRENT(r13)
#endif /* CONFIG_PPC_BOOK3E */
ld r4,TI_FLAGS(r9)
andi. r3,r3,MSR_PR
beq resume_kernel
#ifdef CONFIG_PPC_BOOK3E
lwz r3,(THREAD+THREAD_DBCR0)(r10)
#endif /* CONFIG_PPC_BOOK3E */
/* Check current_thread_info()->flags */
andi. r0,r4,_TIF_USER_WORK_MASK
bne 1f
#ifdef CONFIG_PPC_BOOK3E
/*
* Check to see if the dbcr0 register is set up to debug.
* Use the internal debug mode bit to do this.
*/
andis. r0,r3,DBCR0_IDM@h
beq restore
mfmsr r0
rlwinm r0,r0,0,~MSR_DE /* Clear MSR.DE */
mtmsr r0
mtspr SPRN_DBCR0,r3
li r10, -1
mtspr SPRN_DBSR,r10
b restore
#else
addi r3,r1,STACK_FRAME_OVERHEAD
bl restore_math
b restore
#endif
1: andi. r0,r4,_TIF_NEED_RESCHED
beq 2f
bl restore_interrupts
SCHEDULE_USER
b ret_from_except_lite
2:
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
andi. r0,r4,_TIF_USER_WORK_MASK & ~_TIF_RESTORE_TM
bne 3f /* only restore TM if nothing else to do */
addi r3,r1,STACK_FRAME_OVERHEAD
bl restore_tm_state
b restore
3:
#endif
bl save_nvgprs
/*
* Use a non volatile GPR to save and restore our thread_info flags
* across the call to restore_interrupts.
*/
mr r30,r4
bl restore_interrupts
mr r4,r30
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_notify_resume
b ret_from_except
resume_kernel:
/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
andis. r8,r4,_TIF_EMULATE_STACK_STORE@h
beq+ 1f
addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
ld r3,GPR1(r1)
subi r3,r3,INT_FRAME_SIZE /* dst: Allocate a trampoline exception frame */
mr r4,r1 /* src: current exception frame */
mr r1,r3 /* Reroute the trampoline frame to r1 */
/* Copy from the original to the trampoline. */
li r5,INT_FRAME_SIZE/8 /* size: INT_FRAME_SIZE */
li r6,0 /* start offset: 0 */
mtctr r5
2: ldx r0,r6,r4
stdx r0,r6,r3
addi r6,r6,8
bdnz 2b
/* Do real store operation to complete stdu */
ld r5,GPR1(r1)
std r8,0(r5)
/* Clear _TIF_EMULATE_STACK_STORE flag */
lis r11,_TIF_EMULATE_STACK_STORE@h
addi r5,r9,TI_FLAGS
0: ldarx r4,0,r5
andc r4,r4,r11
stdcx. r4,0,r5
bne- 0b
1:
#ifdef CONFIG_PREEMPT
/* Check if we need to preempt */
andi. r0,r4,_TIF_NEED_RESCHED
beq+ restore
/* Check that preempt_count() == 0 and interrupts are enabled */
lwz r8,TI_PREEMPT(r9)
cmpwi cr0,r8,0
bne restore
ld r0,SOFTE(r1)
andi. r0,r0,IRQS_DISABLED
bne restore
/*
* Here we are preempting the current task. We want to make
* sure we are soft-disabled first and reconcile irq state.
*/
RECONCILE_IRQ_STATE(r3,r4)
1: bl preempt_schedule_irq
/* Re-test flags and eventually loop */
CURRENT_THREAD_INFO(r9, r1)
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
/*
* arch_local_irq_restore() from preempt_schedule_irq above may
* enable hard interrupt but we really should disable interrupts
* when we return from the interrupt, and so that we don't get
* interrupted after loading SRR0/1.
*/
#ifdef CONFIG_PPC_BOOK3E
wrteei 0
#else
li r10,MSR_RI
mtmsrd r10,1 /* Update machine state */
#endif /* CONFIG_PPC_BOOK3E */
#endif /* CONFIG_PREEMPT */
.globl fast_exc_return_irq
fast_exc_return_irq:
restore:
/*
* This is the main kernel exit path. First we check if we
* are about to re-enable interrupts
*/
ld r5,SOFTE(r1)
lbz r6,PACAIRQSOFTMASK(r13)
andi. r5,r5,IRQS_DISABLED
bne .Lrestore_irq_off
/* We are enabling, were we already enabled ? Yes, just return */
andi. r6,r6,IRQS_DISABLED
beq cr0,.Ldo_restore
/*
* We are about to soft-enable interrupts (we are hard disabled
* at this point). We check if there's anything that needs to
* be replayed first.
*/
lbz r0,PACAIRQHAPPENED(r13)
cmpwi cr0,r0,0
bne- .Lrestore_check_irq_replay
/*
* Get here when nothing happened while soft-disabled, just
* soft-enable and move-on. We will hard-enable as a side
* effect of rfi
*/
.Lrestore_no_replay:
TRACE_ENABLE_INTS
li r0,IRQS_ENABLED
stb r0,PACAIRQSOFTMASK(r13);
/*
* Final return path. BookE is handled in a different file
*/
.Ldo_restore:
#ifdef CONFIG_PPC_BOOK3E
b exception_return_book3e
#else
/*
* Clear the reservation. If we know the CPU tracks the address of
* the reservation then we can potentially save some cycles and use
* a larx. On POWER6 and POWER7 this is significantly faster.
*/
BEGIN_FTR_SECTION
stdcx. r0,0,r1 /* to clear the reservation */
FTR_SECTION_ELSE
ldarx r4,0,r1
ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
/*
* Some code path such as load_up_fpu or altivec return directly
* here. They run entirely hard disabled and do not alter the
* interrupt state. They also don't use lwarx/stwcx. and thus
* are known not to leave dangling reservations.
*/
.globl fast_exception_return
fast_exception_return:
ld r3,_MSR(r1)
ld r4,_CTR(r1)
ld r0,_LINK(r1)
mtctr r4
mtlr r0
ld r4,_XER(r1)
mtspr SPRN_XER,r4
REST_8GPRS(5, r1)
andi. r0,r3,MSR_RI
beq- .Lunrecov_restore
/* Load PPR from thread struct before we clear MSR:RI */
BEGIN_FTR_SECTION
ld r2,PACACURRENT(r13)
ld r2,TASKTHREADPPR(r2)
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
/*
* Clear RI before restoring r13. If we are returning to
* userspace and we take an exception after restoring r13,
* we end up corrupting the userspace r13 value.
*/
li r4,0
mtmsrd r4,1
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
/* TM debug */
std r3, PACATMSCRATCH(r13) /* Stash returned-to MSR */
#endif
/*
* r13 is our per cpu area, only restore it if we are returning to
* userspace the value stored in the stack frame may belong to
* another CPU.
*/
andi. r0,r3,MSR_PR
beq 1f
BEGIN_FTR_SECTION
mtspr SPRN_PPR,r2 /* Restore PPR */
END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
ACCOUNT_CPU_USER_EXIT(r13, r2, r4)
REST_GPR(13, r1)
mtspr SPRN_SRR1,r3
ld r2,_CCR(r1)
mtcrf 0xFF,r2
ld r2,_NIP(r1)
mtspr SPRN_SRR0,r2
ld r0,GPR0(r1)
ld r2,GPR2(r1)
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r1,GPR1(r1)
RFI_TO_USER
b . /* prevent speculative execution */
1: mtspr SPRN_SRR1,r3
ld r2,_CCR(r1)
mtcrf 0xFF,r2
ld r2,_NIP(r1)
mtspr SPRN_SRR0,r2
ld r0,GPR0(r1)
ld r2,GPR2(r1)
ld r3,GPR3(r1)
ld r4,GPR4(r1)
ld r1,GPR1(r1)
RFI_TO_KERNEL
b . /* prevent speculative execution */
#endif /* CONFIG_PPC_BOOK3E */
/*
* We are returning to a context with interrupts soft disabled.
*
* However, we may also about to hard enable, so we need to
* make sure that in this case, we also clear PACA_IRQ_HARD_DIS
* or that bit can get out of sync and bad things will happen
*/
.Lrestore_irq_off:
ld r3,_MSR(r1)
lbz r7,PACAIRQHAPPENED(r13)
andi. r0,r3,MSR_EE
beq 1f
rlwinm r7,r7,0,~PACA_IRQ_HARD_DIS
stb r7,PACAIRQHAPPENED(r13)
1:
#if defined(CONFIG_PPC_IRQ_SOFT_MASK_DEBUG) && defined(CONFIG_BUG)
/* The interrupt should not have soft enabled. */
lbz r7,PACAIRQSOFTMASK(r13)
1: tdeqi r7,IRQS_ENABLED
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
b .Ldo_restore
/*
* Something did happen, check if a re-emit is needed
* (this also clears paca->irq_happened)
*/
.Lrestore_check_irq_replay:
/* XXX: We could implement a fast path here where we check
* for irq_happened being just 0x01, in which case we can
* clear it and return. That means that we would potentially
* miss a decrementer having wrapped all the way around.
*
* Still, this might be useful for things like hash_page
*/
bl __check_irq_replay
cmpwi cr0,r3,0
beq .Lrestore_no_replay
/*
* We need to re-emit an interrupt. We do so by re-using our
* existing exception frame. We first change the trap value,
* but we need to ensure we preserve the low nibble of it
*/
ld r4,_TRAP(r1)
clrldi r4,r4,60
or r4,r4,r3
std r4,_TRAP(r1)
/*
* PACA_IRQ_HARD_DIS won't always be set here, so set it now
* to reconcile the IRQ state. Tracing is already accounted for.
*/
lbz r4,PACAIRQHAPPENED(r13)
ori r4,r4,PACA_IRQ_HARD_DIS
stb r4,PACAIRQHAPPENED(r13)
/*
* Then find the right handler and call it. Interrupts are
* still soft-disabled and we keep them that way.
*/
cmpwi cr0,r3,0x500
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl do_IRQ
b ret_from_except
1: cmpwi cr0,r3,0xf00
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl performance_monitor_exception
b ret_from_except
1: cmpwi cr0,r3,0xe60
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl handle_hmi_exception
b ret_from_except
1: cmpwi cr0,r3,0x900
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl timer_interrupt
b ret_from_except
#ifdef CONFIG_PPC_DOORBELL
1:
#ifdef CONFIG_PPC_BOOK3E
cmpwi cr0,r3,0x280
#else
cmpwi cr0,r3,0xa00
#endif /* CONFIG_PPC_BOOK3E */
bne 1f
addi r3,r1,STACK_FRAME_OVERHEAD;
bl doorbell_exception
#endif /* CONFIG_PPC_DOORBELL */
1: b ret_from_except /* What else to do here ? */
.Lunrecov_restore:
addi r3,r1,STACK_FRAME_OVERHEAD
bl unrecoverable_exception
b .Lunrecov_restore
_ASM_NOKPROBE_SYMBOL(ret_from_except);
_ASM_NOKPROBE_SYMBOL(ret_from_except_lite);
_ASM_NOKPROBE_SYMBOL(resume_kernel);
_ASM_NOKPROBE_SYMBOL(fast_exc_return_irq);
_ASM_NOKPROBE_SYMBOL(restore);
_ASM_NOKPROBE_SYMBOL(fast_exception_return);
#ifdef CONFIG_PPC_RTAS
/*
* On CHRP, the Run-Time Abstraction Services (RTAS) have to be
* called with the MMU off.
*
* In addition, we need to be in 32b mode, at least for now.
*
* Note: r3 is an input parameter to rtas, so don't trash it...
*/
_GLOBAL(enter_rtas)
mflr r0
std r0,16(r1)
stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */
/* Because RTAS is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* RTAS might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_GPR(2, r1) /* Save the TOC */
SAVE_GPR(13, r1) /* Save paca */
SAVE_8GPRS(14, r1) /* Save the non-volatiles */
SAVE_10GPRS(22, r1) /* ditto */
mfcr r4
std r4,_CCR(r1)
mfctr r5
std r5,_CTR(r1)
mfspr r6,SPRN_XER
std r6,_XER(r1)
mfdar r7
std r7,_DAR(r1)
mfdsisr r8
std r8,_DSISR(r1)
/* Temporary workaround to clear CR until RTAS can be modified to
* ignore all bits.
*/
li r0,0
mtcr r0
#ifdef CONFIG_BUG
/* There is no way it is acceptable to get here with interrupts enabled,
* check it with the asm equivalent of WARN_ON
*/
lbz r0,PACAIRQSOFTMASK(r13)
1: tdeqi r0,IRQS_ENABLED
EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING
#endif
/* Hard-disable interrupts */
mfmsr r6
rldicl r7,r6,48,1
rotldi r7,r7,16
mtmsrd r7,1
/* Unfortunately, the stack pointer and the MSR are also clobbered,
* so they are saved in the PACA which allows us to restore
* our original state after RTAS returns.
*/
std r1,PACAR1(r13)
std r6,PACASAVEDMSR(r13)
/* Setup our real return addr */
LOAD_REG_ADDR(r4,rtas_return_loc)
clrldi r4,r4,2 /* convert to realmode address */
mtlr r4
li r0,0
ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI
andc r0,r6,r0
li r9,1
rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG)
ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI|MSR_LE
andc r6,r0,r9
__enter_rtas:
sync /* disable interrupts so SRR0/1 */
mtmsrd r0 /* don't get trashed */
LOAD_REG_ADDR(r4, rtas)
ld r5,RTASENTRY(r4) /* get the rtas->entry value */
ld r4,RTASBASE(r4) /* get the rtas->base value */
mtspr SPRN_SRR0,r5
mtspr SPRN_SRR1,r6
RFI_TO_KERNEL
b . /* prevent speculative execution */
rtas_return_loc:
FIXUP_ENDIAN
/*
* Clear RI and set SF before anything.
*/
mfmsr r6
li r0,MSR_RI
andc r6,r6,r0
sldi r0,r0,(MSR_SF_LG - MSR_RI_LG)
or r6,r6,r0
sync
mtmsrd r6
/* relocation is off at this point */
GET_PACA(r4)
clrldi r4,r4,2 /* convert to realmode address */
bcl 20,31,$+4
0: mflr r3
ld r3,(1f-0b)(r3) /* get &rtas_restore_regs */
ld r1,PACAR1(r4) /* Restore our SP */
ld r4,PACASAVEDMSR(r4) /* Restore our MSR */
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
RFI_TO_KERNEL
b . /* prevent speculative execution */
_ASM_NOKPROBE_SYMBOL(__enter_rtas)
_ASM_NOKPROBE_SYMBOL(rtas_return_loc)
.align 3
1: .8byte rtas_restore_regs
rtas_restore_regs:
/* relocation is on at this point */
REST_GPR(2, r1) /* Restore the TOC */
REST_GPR(13, r1) /* Restore paca */
REST_8GPRS(14, r1) /* Restore the non-volatiles */
REST_10GPRS(22, r1) /* ditto */
GET_PACA(r13)
ld r4,_CCR(r1)
mtcr r4
ld r5,_CTR(r1)
mtctr r5
ld r6,_XER(r1)
mtspr SPRN_XER,r6
ld r7,_DAR(r1)
mtdar r7
ld r8,_DSISR(r1)
mtdsisr r8
addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */
ld r0,16(r1) /* get return address */
mtlr r0
blr /* return to caller */
#endif /* CONFIG_PPC_RTAS */
_GLOBAL(enter_prom)
mflr r0
std r0,16(r1)
stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
/* Because PROM is running in 32b mode, it clobbers the high order half
* of all registers that it saves. We therefore save those registers
* PROM might touch to the stack. (r0, r3-r13 are caller saved)
*/
SAVE_GPR(2, r1)
SAVE_GPR(13, r1)
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
mfcr r10
mfmsr r11
std r10,_CCR(r1)
std r11,_MSR(r1)
/* Put PROM address in SRR0 */
mtsrr0 r4
/* Setup our trampoline return addr in LR */
bcl 20,31,$+4
0: mflr r4
addi r4,r4,(1f - 0b)
mtlr r4
/* Prepare a 32-bit mode big endian MSR
*/
#ifdef CONFIG_PPC_BOOK3E
rlwinm r11,r11,0,1,31
mtsrr1 r11
rfi
#else /* CONFIG_PPC_BOOK3E */
LOAD_REG_IMMEDIATE(r12, MSR_SF | MSR_ISF | MSR_LE)
andc r11,r11,r12
mtsrr1 r11
RFI_TO_KERNEL
#endif /* CONFIG_PPC_BOOK3E */
1: /* Return from OF */
FIXUP_ENDIAN
/* Just make sure that r1 top 32 bits didn't get
* corrupt by OF
*/
rldicl r1,r1,0,32
/* Restore the MSR (back to 64 bits) */
ld r0,_MSR(r1)
MTMSRD(r0)
isync
/* Restore other registers */
REST_GPR(2, r1)
REST_GPR(13, r1)
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
ld r4,_CCR(r1)
mtcr r4
addi r1,r1,PROM_FRAME_SIZE
ld r0,16(r1)
mtlr r0
blr
Reference in New Issue View Git Blame Copy Permalink