mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-16 15:34:48 +08:00
cd4a05f9df
This allows us to have more mapping functions for more than one i.MX architecture in the kernel. As this is the earliest board specific hook we have, also use it to set the cpu type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
253 lines
6.4 KiB
C
253 lines
6.4 KiB
C
/*
|
|
* Copyright (C) 2009 Sascha Hauer, Pengutronix
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/mtd/plat-ram.h>
|
|
#include <linux/memory.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/smc911x.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/at24.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/common.h>
|
|
#include <mach/imx-uart.h>
|
|
#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
|
|
#include <mach/i2c.h>
|
|
#endif
|
|
#include <mach/iomux-mx35.h>
|
|
#include <mach/ipu.h>
|
|
#include <mach/mx3fb.h>
|
|
|
|
#include "devices.h"
|
|
|
|
static const struct fb_videomode fb_modedb[] = {
|
|
{
|
|
/* 240x320 @ 60 Hz */
|
|
.name = "Sharp-LQ035Q7",
|
|
.refresh = 60,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.pixclock = 185925,
|
|
.left_margin = 9,
|
|
.right_margin = 16,
|
|
.upper_margin = 7,
|
|
.lower_margin = 9,
|
|
.hsync_len = 1,
|
|
.vsync_len = 1,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
.flag = 0,
|
|
}, {
|
|
/* 240x320 @ 60 Hz */
|
|
.name = "TX090",
|
|
.refresh = 60,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.pixclock = 38255,
|
|
.left_margin = 144,
|
|
.right_margin = 0,
|
|
.upper_margin = 7,
|
|
.lower_margin = 40,
|
|
.hsync_len = 96,
|
|
.vsync_len = 1,
|
|
.sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
|
|
.vmode = FB_VMODE_NONINTERLACED,
|
|
.flag = 0,
|
|
},
|
|
};
|
|
|
|
static struct ipu_platform_data mx3_ipu_data = {
|
|
.irq_base = MXC_IPU_IRQ_START,
|
|
};
|
|
|
|
static struct mx3fb_platform_data mx3fb_pdata = {
|
|
.dma_dev = &mx3_ipu.dev,
|
|
.name = "Sharp-LQ035Q7",
|
|
.mode = fb_modedb,
|
|
.num_modes = ARRAY_SIZE(fb_modedb),
|
|
};
|
|
|
|
static struct physmap_flash_data pcm043_flash_data = {
|
|
.width = 2,
|
|
};
|
|
|
|
static struct resource pcm043_flash_resource = {
|
|
.start = 0xa0000000,
|
|
.end = 0xa1ffffff,
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device pcm043_flash = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &pcm043_flash_data,
|
|
},
|
|
.resource = &pcm043_flash_resource,
|
|
.num_resources = 1,
|
|
};
|
|
|
|
static struct imxuart_platform_data uart_pdata = {
|
|
.flags = IMXUART_HAVE_RTSCTS,
|
|
};
|
|
|
|
#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
|
|
static struct imxi2c_platform_data pcm043_i2c_1_data = {
|
|
.bitrate = 50000,
|
|
};
|
|
|
|
static struct at24_platform_data board_eeprom = {
|
|
.byte_len = 4096,
|
|
.page_size = 32,
|
|
.flags = AT24_FLAG_ADDR16,
|
|
};
|
|
|
|
static struct i2c_board_info pcm043_i2c_devices[] = {
|
|
{
|
|
I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
|
|
.platform_data = &board_eeprom,
|
|
}, {
|
|
I2C_BOARD_INFO("rtc-pcf8563", 0x51),
|
|
.type = "pcf8563",
|
|
}
|
|
};
|
|
#endif
|
|
|
|
static struct platform_device *devices[] __initdata = {
|
|
&pcm043_flash,
|
|
&mxc_fec_device,
|
|
};
|
|
|
|
static struct pad_desc pcm043_pads[] = {
|
|
/* UART1 */
|
|
MX35_PAD_CTS1__UART1_CTS,
|
|
MX35_PAD_RTS1__UART1_RTS,
|
|
MX35_PAD_TXD1__UART1_TXD_MUX,
|
|
MX35_PAD_RXD1__UART1_RXD_MUX,
|
|
/* UART2 */
|
|
MX35_PAD_CTS2__UART2_CTS,
|
|
MX35_PAD_RTS2__UART2_RTS,
|
|
MX35_PAD_TXD2__UART2_TXD_MUX,
|
|
MX35_PAD_RXD2__UART2_RXD_MUX,
|
|
/* FEC */
|
|
MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
|
|
MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
|
|
MX35_PAD_FEC_RX_DV__FEC_RX_DV,
|
|
MX35_PAD_FEC_COL__FEC_COL,
|
|
MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
|
|
MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
|
|
MX35_PAD_FEC_TX_EN__FEC_TX_EN,
|
|
MX35_PAD_FEC_MDC__FEC_MDC,
|
|
MX35_PAD_FEC_MDIO__FEC_MDIO,
|
|
MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
|
|
MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
|
|
MX35_PAD_FEC_CRS__FEC_CRS,
|
|
MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
|
|
MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
|
|
MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
|
|
MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
|
|
MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
|
|
MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
|
|
/* I2C1 */
|
|
MX35_PAD_I2C1_CLK__I2C1_SCL,
|
|
MX35_PAD_I2C1_DAT__I2C1_SDA,
|
|
/* Display */
|
|
MX35_PAD_LD0__IPU_DISPB_DAT_0,
|
|
MX35_PAD_LD1__IPU_DISPB_DAT_1,
|
|
MX35_PAD_LD2__IPU_DISPB_DAT_2,
|
|
MX35_PAD_LD3__IPU_DISPB_DAT_3,
|
|
MX35_PAD_LD4__IPU_DISPB_DAT_4,
|
|
MX35_PAD_LD5__IPU_DISPB_DAT_5,
|
|
MX35_PAD_LD6__IPU_DISPB_DAT_6,
|
|
MX35_PAD_LD7__IPU_DISPB_DAT_7,
|
|
MX35_PAD_LD8__IPU_DISPB_DAT_8,
|
|
MX35_PAD_LD9__IPU_DISPB_DAT_9,
|
|
MX35_PAD_LD10__IPU_DISPB_DAT_10,
|
|
MX35_PAD_LD11__IPU_DISPB_DAT_11,
|
|
MX35_PAD_LD12__IPU_DISPB_DAT_12,
|
|
MX35_PAD_LD13__IPU_DISPB_DAT_13,
|
|
MX35_PAD_LD14__IPU_DISPB_DAT_14,
|
|
MX35_PAD_LD15__IPU_DISPB_DAT_15,
|
|
MX35_PAD_LD16__IPU_DISPB_DAT_16,
|
|
MX35_PAD_LD17__IPU_DISPB_DAT_17,
|
|
MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
|
|
MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
|
|
MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
|
|
MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
|
|
MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
|
|
MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
|
|
MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
|
|
MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
|
|
};
|
|
|
|
/*
|
|
* Board specific initialization.
|
|
*/
|
|
static void __init mxc_board_init(void)
|
|
{
|
|
mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
|
|
|
|
platform_add_devices(devices, ARRAY_SIZE(devices));
|
|
|
|
mxc_register_device(&mxc_uart_device0, &uart_pdata);
|
|
|
|
mxc_register_device(&mxc_uart_device1, &uart_pdata);
|
|
|
|
#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
|
|
i2c_register_board_info(0, pcm043_i2c_devices,
|
|
ARRAY_SIZE(pcm043_i2c_devices));
|
|
|
|
mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
|
|
#endif
|
|
|
|
mxc_register_device(&mx3_ipu, &mx3_ipu_data);
|
|
mxc_register_device(&mx3_fb, &mx3fb_pdata);
|
|
}
|
|
|
|
static void __init pcm043_timer_init(void)
|
|
{
|
|
mx35_clocks_init();
|
|
}
|
|
|
|
struct sys_timer pcm043_timer = {
|
|
.init = pcm043_timer_init,
|
|
};
|
|
|
|
MACHINE_START(PCM043, "Phytec Phycore pcm043")
|
|
/* Maintainer: Pengutronix */
|
|
.phys_io = AIPS1_BASE_ADDR,
|
|
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
|
|
.boot_params = PHYS_OFFSET + 0x100,
|
|
.map_io = mx35_map_io,
|
|
.init_irq = mxc_init_irq,
|
|
.init_machine = mxc_board_init,
|
|
.timer = &pcm043_timer,
|
|
MACHINE_END
|
|
|