mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
952a11ca32
We have bool so use it consistently in all the drivers. The following Coccinelle script was used: @@ identifier T; type t = { char, int }; @@ struct T { ... - t valid; + bool valid; ... } @@ identifier v; @@ ( - v->valid = 0 + v->valid = false | - v->valid = 1 + v->valid = true ) followed by sed to fixup the comments: sed '/bool valid;/{s/!=0/true/;s/zero/false/}' Few whitespace changes were fixed manually. All modified drivers were compile-tested. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Link: https://lore.kernel.org/r/20210924195202.27917-1-fercerpav@gmail.com [groeck: Fixed up 'u8 valid' to 'boool valid' in atxp1.c] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
396 lines
11 KiB
C
396 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* ds1621.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring
|
|
* Christian W. Zuckschwerdt <zany@triq.net> 2000-11-23
|
|
* based on lm75.c by Frodo Looijaard <frodol@dds.nl>
|
|
* Ported to Linux 2.6 by Aurelien Jarno <aurelien@aurel32.net> with
|
|
* the help of Jean Delvare <jdelvare@suse.de>
|
|
*
|
|
* The DS1621 device is a digital temperature/thermometer with 9-bit
|
|
* resolution, a thermal alarm output (Tout), and user-defined minimum
|
|
* and maximum temperature thresholds (TH and TL).
|
|
*
|
|
* The DS1625, DS1631, DS1721, and DS1731 are pin compatible with the DS1621
|
|
* and similar in operation, with slight variations as noted in the device
|
|
* datasheets (please refer to www.maximintegrated.com for specific
|
|
* device information).
|
|
*
|
|
* Since the DS1621 was the first chipset supported by this driver,
|
|
* most comments will refer to this chipset, but are actually general
|
|
* and concern all supported chipsets, unless mentioned otherwise.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/kernel.h>
|
|
|
|
/* Supported devices */
|
|
enum chips { ds1621, ds1625, ds1631, ds1721, ds1731 };
|
|
|
|
/* Insmod parameters */
|
|
static int polarity = -1;
|
|
module_param(polarity, int, 0);
|
|
MODULE_PARM_DESC(polarity, "Output's polarity: 0 = active high, 1 = active low");
|
|
|
|
/*
|
|
* The Configuration/Status register
|
|
*
|
|
* - DS1621:
|
|
* 7 6 5 4 3 2 1 0
|
|
* |Done|THF |TLF |NVB | X | X |POL |1SHOT|
|
|
*
|
|
* - DS1625:
|
|
* 7 6 5 4 3 2 1 0
|
|
* |Done|THF |TLF |NVB | 1 | 0 |POL |1SHOT|
|
|
*
|
|
* - DS1631, DS1731:
|
|
* 7 6 5 4 3 2 1 0
|
|
* |Done|THF |TLF |NVB | R1 | R0 |POL |1SHOT|
|
|
*
|
|
* - DS1721:
|
|
* 7 6 5 4 3 2 1 0
|
|
* |Done| X | X | U | R1 | R0 |POL |1SHOT|
|
|
*
|
|
* Where:
|
|
* - 'X' is Reserved
|
|
* - 'U' is Undefined
|
|
*/
|
|
#define DS1621_REG_CONFIG_NVB 0x10
|
|
#define DS1621_REG_CONFIG_RESOL 0x0C
|
|
#define DS1621_REG_CONFIG_POLARITY 0x02
|
|
#define DS1621_REG_CONFIG_1SHOT 0x01
|
|
#define DS1621_REG_CONFIG_DONE 0x80
|
|
|
|
#define DS1621_REG_CONFIG_RESOL_SHIFT 2
|
|
|
|
/* ds1721 conversion rates: {C/LSB, time(ms), resolution bit setting} */
|
|
static const unsigned short ds1721_convrates[] = {
|
|
94, /* 9-bits (0.5, 93.75, RES[0..1] = 0 */
|
|
188, /* 10-bits (0.25, 187.5, RES[0..1] = 1 */
|
|
375, /* 11-bits (0.125, 375, RES[0..1] = 2 */
|
|
750, /* 12-bits (0.0625, 750, RES[0..1] = 3 */
|
|
};
|
|
|
|
#define DS1621_CONVERSION_MAX 750
|
|
#define DS1625_CONVERSION_MAX 500
|
|
|
|
#define DS1621_TEMP_MAX 125000
|
|
#define DS1621_TEMP_MIN (-55000)
|
|
|
|
/* The DS1621 temperature registers */
|
|
static const u8 DS1621_REG_TEMP[3] = {
|
|
0xAA, /* input, word, RO */
|
|
0xA2, /* min, word, RW */
|
|
0xA1, /* max, word, RW */
|
|
};
|
|
#define DS1621_REG_CONF 0xAC /* byte, RW */
|
|
#define DS1621_COM_START 0xEE /* no data */
|
|
#define DS1721_COM_START 0x51 /* no data */
|
|
#define DS1621_COM_STOP 0x22 /* no data */
|
|
|
|
/* The DS1621 configuration register */
|
|
#define DS1621_ALARM_TEMP_HIGH 0x40
|
|
#define DS1621_ALARM_TEMP_LOW 0x20
|
|
|
|
/* Conversions */
|
|
#define ALARMS_FROM_REG(val) ((val) & \
|
|
(DS1621_ALARM_TEMP_HIGH | DS1621_ALARM_TEMP_LOW))
|
|
|
|
/* Each client has this additional data */
|
|
struct ds1621_data {
|
|
struct i2c_client *client;
|
|
struct mutex update_lock;
|
|
bool valid; /* true if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
enum chips kind; /* device type */
|
|
|
|
u16 temp[3]; /* Register values, word */
|
|
u8 conf; /* Register encoding, combined */
|
|
u8 zbits; /* Resolution encoded as number of
|
|
* zero bits */
|
|
u16 update_interval; /* Conversion rate in milliseconds */
|
|
};
|
|
|
|
static inline int DS1621_TEMP_FROM_REG(u16 reg)
|
|
{
|
|
return DIV_ROUND_CLOSEST(((s16)reg / 16) * 625, 10);
|
|
}
|
|
|
|
/*
|
|
* TEMP: 0.001C/bit (-55C to +125C)
|
|
* REG:
|
|
* - 1621, 1625: 0.5C/bit, 7 zero-bits
|
|
* - 1631, 1721, 1731: 0.0625C/bit, 4 zero-bits
|
|
*/
|
|
static inline u16 DS1621_TEMP_TO_REG(long temp, u8 zbits)
|
|
{
|
|
temp = clamp_val(temp, DS1621_TEMP_MIN, DS1621_TEMP_MAX);
|
|
temp = DIV_ROUND_CLOSEST(temp * (1 << (8 - zbits)), 1000) << zbits;
|
|
return temp;
|
|
}
|
|
|
|
static void ds1621_init_client(struct ds1621_data *data,
|
|
struct i2c_client *client)
|
|
{
|
|
u8 conf, new_conf, sreg, resol;
|
|
|
|
new_conf = conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
|
|
/* switch to continuous conversion mode */
|
|
new_conf &= ~DS1621_REG_CONFIG_1SHOT;
|
|
|
|
/* setup output polarity */
|
|
if (polarity == 0)
|
|
new_conf &= ~DS1621_REG_CONFIG_POLARITY;
|
|
else if (polarity == 1)
|
|
new_conf |= DS1621_REG_CONFIG_POLARITY;
|
|
|
|
if (conf != new_conf)
|
|
i2c_smbus_write_byte_data(client, DS1621_REG_CONF, new_conf);
|
|
|
|
switch (data->kind) {
|
|
case ds1625:
|
|
data->update_interval = DS1625_CONVERSION_MAX;
|
|
data->zbits = 7;
|
|
sreg = DS1621_COM_START;
|
|
break;
|
|
case ds1631:
|
|
case ds1721:
|
|
case ds1731:
|
|
resol = (new_conf & DS1621_REG_CONFIG_RESOL) >>
|
|
DS1621_REG_CONFIG_RESOL_SHIFT;
|
|
data->update_interval = ds1721_convrates[resol];
|
|
data->zbits = 7 - resol;
|
|
sreg = DS1721_COM_START;
|
|
break;
|
|
default:
|
|
data->update_interval = DS1621_CONVERSION_MAX;
|
|
data->zbits = 7;
|
|
sreg = DS1621_COM_START;
|
|
break;
|
|
}
|
|
|
|
/* start conversion */
|
|
i2c_smbus_write_byte(client, sreg);
|
|
}
|
|
|
|
static struct ds1621_data *ds1621_update_client(struct device *dev)
|
|
{
|
|
struct ds1621_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
u8 new_conf;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + data->update_interval) ||
|
|
!data->valid) {
|
|
int i;
|
|
|
|
dev_dbg(&client->dev, "Starting ds1621 update\n");
|
|
|
|
data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(data->temp); i++)
|
|
data->temp[i] = i2c_smbus_read_word_swapped(client,
|
|
DS1621_REG_TEMP[i]);
|
|
|
|
/* reset alarms if necessary */
|
|
new_conf = data->conf;
|
|
if (data->temp[0] > data->temp[1]) /* input > min */
|
|
new_conf &= ~DS1621_ALARM_TEMP_LOW;
|
|
if (data->temp[0] < data->temp[2]) /* input < max */
|
|
new_conf &= ~DS1621_ALARM_TEMP_HIGH;
|
|
if (data->conf != new_conf)
|
|
i2c_smbus_write_byte_data(client, DS1621_REG_CONF,
|
|
new_conf);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
static ssize_t temp_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ds1621_data *data = ds1621_update_client(dev);
|
|
return sprintf(buf, "%d\n",
|
|
DS1621_TEMP_FROM_REG(data->temp[attr->index]));
|
|
}
|
|
|
|
static ssize_t temp_store(struct device *dev, struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ds1621_data *data = dev_get_drvdata(dev);
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp[attr->index] = DS1621_TEMP_TO_REG(val, data->zbits);
|
|
i2c_smbus_write_word_swapped(data->client, DS1621_REG_TEMP[attr->index],
|
|
data->temp[attr->index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t alarms_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct ds1621_data *data = ds1621_update_client(dev);
|
|
return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->conf));
|
|
}
|
|
|
|
static ssize_t alarm_show(struct device *dev, struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ds1621_data *data = ds1621_update_client(dev);
|
|
return sprintf(buf, "%d\n", !!(data->conf & attr->index));
|
|
}
|
|
|
|
static ssize_t update_interval_show(struct device *dev,
|
|
struct device_attribute *da, char *buf)
|
|
{
|
|
struct ds1621_data *data = dev_get_drvdata(dev);
|
|
return scnprintf(buf, PAGE_SIZE, "%hu\n", data->update_interval);
|
|
}
|
|
|
|
static ssize_t update_interval_store(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct ds1621_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
unsigned long convrate;
|
|
s32 err;
|
|
int resol = 0;
|
|
|
|
err = kstrtoul(buf, 10, &convrate);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Convert rate into resolution bits */
|
|
while (resol < (ARRAY_SIZE(ds1721_convrates) - 1) &&
|
|
convrate > ds1721_convrates[resol])
|
|
resol++;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->conf = i2c_smbus_read_byte_data(client, DS1621_REG_CONF);
|
|
data->conf &= ~DS1621_REG_CONFIG_RESOL;
|
|
data->conf |= (resol << DS1621_REG_CONFIG_RESOL_SHIFT);
|
|
i2c_smbus_write_byte_data(client, DS1621_REG_CONF, data->conf);
|
|
data->update_interval = ds1721_convrates[resol];
|
|
data->zbits = 7 - resol;
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(alarms);
|
|
static DEVICE_ATTR_RW(update_interval);
|
|
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, 1);
|
|
static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, 2);
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, DS1621_ALARM_TEMP_LOW);
|
|
static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, DS1621_ALARM_TEMP_HIGH);
|
|
|
|
static struct attribute *ds1621_attributes[] = {
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
|
|
&dev_attr_alarms.attr,
|
|
&dev_attr_update_interval.attr,
|
|
NULL
|
|
};
|
|
|
|
static umode_t ds1621_attribute_visible(struct kobject *kobj,
|
|
struct attribute *attr, int index)
|
|
{
|
|
struct device *dev = kobj_to_dev(kobj);
|
|
struct ds1621_data *data = dev_get_drvdata(dev);
|
|
|
|
if (attr == &dev_attr_update_interval.attr)
|
|
if (data->kind == ds1621 || data->kind == ds1625)
|
|
/* shhh, we're hiding update_interval */
|
|
return 0;
|
|
return attr->mode;
|
|
}
|
|
|
|
static const struct attribute_group ds1621_group = {
|
|
.attrs = ds1621_attributes,
|
|
.is_visible = ds1621_attribute_visible
|
|
};
|
|
__ATTRIBUTE_GROUPS(ds1621);
|
|
|
|
static const struct i2c_device_id ds1621_id[];
|
|
|
|
static int ds1621_probe(struct i2c_client *client)
|
|
{
|
|
struct ds1621_data *data;
|
|
struct device *hwmon_dev;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(struct ds1621_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&data->update_lock);
|
|
|
|
data->kind = i2c_match_id(ds1621_id, client)->driver_data;
|
|
data->client = client;
|
|
|
|
/* Initialize the DS1621 chip */
|
|
ds1621_init_client(data, client);
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
|
|
client->name, data,
|
|
ds1621_groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id ds1621_id[] = {
|
|
{ "ds1621", ds1621 },
|
|
{ "ds1625", ds1625 },
|
|
{ "ds1631", ds1631 },
|
|
{ "ds1721", ds1721 },
|
|
{ "ds1731", ds1731 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ds1621_id);
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver ds1621_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "ds1621",
|
|
},
|
|
.probe_new = ds1621_probe,
|
|
.id_table = ds1621_id,
|
|
};
|
|
|
|
module_i2c_driver(ds1621_driver);
|
|
|
|
MODULE_AUTHOR("Christian W. Zuckschwerdt <zany@triq.net>");
|
|
MODULE_DESCRIPTION("DS1621 driver");
|
|
MODULE_LICENSE("GPL");
|