linux/sound/firewire/Kconfig
Takashi Sakamoto 76fdb3a9e1 ALSA: fireface: add support for Fireface 400
Fireface 400 is a second model of RME Fireface series, released in 2006.
This commit adds support for this model.

This model supports 8 analog channels, 2 S/PDIF channels and 8 ADAT
channels in both of tx/rx packet. The number of ADAT channels differs
depending on each mode of sampling transmission frequency.

$ python2 linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04107768  bus_info_length 4, crc_length 16, crc 30568 (should be 61311)
404  31333934  bus_name "1394"
408  20009002  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 9 (1024)
40c  000a3501  company_id 000a35     |
410  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

               root directory
               -----------------------------------------------------------------
414  000485ec  directory_length 4, crc 34284
418  03000a35  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  000314c4  directory_length 3, crc 5316
42c  12000a35  specifier id
430  13000002  version
434  17101800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000261a8  leaf_length 2, crc 25000
43c  000a3501  company_id 000a35     |
440  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:54 +02:00

164 lines
4.7 KiB
Plaintext

menuconfig SND_FIREWIRE
bool "FireWire sound devices"
depends on FIREWIRE
default y
help
Support for IEEE-1394/FireWire/iLink sound devices.
if SND_FIREWIRE && FIREWIRE
config SND_FIREWIRE_LIB
tristate
select SND_PCM
select SND_RAWMIDI
config SND_DICE
tristate "DICE-based DACs support"
select SND_HWDEP
select SND_FIREWIRE_LIB
help
Say Y here to include support for many DACs based on the DICE
chip family (DICE-II/Jr/Mini) which TC Applied Technologies produces.
To compile this driver as a module, choose M here: the module
will be called snd-dice.
config SND_OXFW
tristate "Oxford Semiconductor FW970/971 chipset support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based on
Oxford Semiconductor FW970/971 chipset.
* Griffin Firewave
* LaCie Firewire Speakers
* Behringer F-Control Audio 202
* Mackie(Loud) Onyx-i series (former models)
* Mackie(Loud) Onyx 1640i (former model)
* Mackie(Loud) Onyx Satellite
* Mackie(Loud) Tapco Link.Firewire
* Mackie(Loud) d.2 pro/d.4 pro
* Mackie(Loud) U.420/U.420d
* TASCAM FireOne
* Stanton Controllers & Systems 1 Deck/Mixer
To compile this driver as a module, choose M here: the module
will be called snd-oxfw.
config SND_ISIGHT
tristate "Apple iSight microphone"
select SND_FIREWIRE_LIB
help
Say Y here to include support for the front and rear microphones
of the Apple iSight web camera.
To compile this driver as a module, choose M here: the module
will be called snd-isight.
config SND_FIREWORKS
tristate "Echo Fireworks board module support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on Echo Digital Audio Fireworks board:
* Mackie Onyx 400F/1200F
* Echo AudioFire12/8(until 2009 July)
* Echo AudioFire2/4/Pre8/8(since 2009 July)
* Echo Fireworks 8/HDMI
* Gibson Robot Interface Pack/GoldTop
To compile this driver as a module, choose M here: the module
will be called snd-fireworks.
config SND_BEBOB
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for FireWire devices based
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
* Edirol FA-66/FA-101
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
* BridgeCo RDAudio1/Audio5
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
* Mackie d.2 (FireWire Option)
* Stanton FinalScratch 2 (ScratchAmp)
* Tascam IF-FW/DM
* Behringer XENIX UFX 1204/1604
* Behringer Digital Mixer X32 series (X-UF Card)
* Behringer FCA610/1616
* Apogee Rosetta 200/400 (X-FireWire card)
* Apogee DA/AD/DD-16X (X-FireWire card)
* Apogee Ensemble
* ESI QuataFire 610
* AcousticReality eARMasterOne
* CME MatrixKFW
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
* Lynx Aurora 8/16 (LT-FW)
* ICON FireXon
* PrismSound Orpheus/ADA-8XR
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
* TerraTec EWS MIC2/EWS MIC8
* TerraTec Aureon 7.1 FireWire
* Yamaha GO44/GO46
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
* M-Audio FireWire410/AudioPhile/Solo
* M-Audio Ozonic/NRV10/ProfireLightBridge
* M-Audio FireWire 1814/ProjectMix IO
* Digidesign Mbox 2 Pro
To compile this driver as a module, choose M here: the module
will be called snd-bebob.
config SND_FIREWIRE_DIGI00X
tristate "Digidesign Digi 002/003 family support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for Digidesign Digi 002/003 family.
* Digi 002 Console
* Digi 002 Rack
* Digi 003 Console
* Digi 003 Rack
* Digi 003 Rack+
To compile this driver as a module, choose M here: the module
will be called snd-firewire-digi00x.
config SND_FIREWIRE_TASCAM
tristate "TASCAM FireWire series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for TASCAM.
* FW-1884
* FW-1082
* FW-1804
To compile this driver as a module, choose M here: the module
will be called snd-firewire-tascam.
config SND_FIREWIRE_MOTU
tristate "Mark of the unicorn FireWire series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to enable support for FireWire devices which MOTU produced:
* 828mk2
* 828mk3
To compile this driver as a module, choose M here: the module
will be called snd-firewire-motu.
config SND_FIREFACE
tristate "RME Fireface series support"
select SND_FIREWIRE_LIB
select SND_HWDEP
help
Say Y here to include support for RME fireface series.
* Fireface 400
endif # SND_FIREWIRE