mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2025-01-01 11:24:25 +08:00
a33e9da347
When running fib_nexthop_multiprefix test I saw all IPv6 test failed.
e.g.
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL]
With -v it shows
COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1
PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes
From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300
--- 2001:db8:101::1 ping statistics ---
1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms
Route get
2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium
Searching for:
2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300
The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will
not put RTA_SRC info. After fix:
]# ./fib_nexthop_multiprefix.sh
TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ]
TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ]
Fixes:
|
||
---|---|---|
.. | ||
accounting | ||
arch | ||
bootconfig | ||
bpf | ||
build | ||
certs | ||
cgroup | ||
counter | ||
crypto/ccp | ||
debugging | ||
edid | ||
firewire | ||
firmware | ||
gpio | ||
hv | ||
iio | ||
include | ||
kvm/kvm_stat | ||
laptop | ||
leds | ||
lib | ||
memory-model | ||
mm | ||
net/ynl | ||
objtool | ||
pci | ||
pcmcia | ||
perf | ||
power | ||
rcu | ||
scripts | ||
spi | ||
testing | ||
thermal | ||
time | ||
tracing | ||
usb | ||
verification | ||
virtio | ||
wmi | ||
workqueue | ||
Makefile |