mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
0426370b58
- The n810 uses tlv320aic33 codec. - GPIO118 is used as reset GPIO for the codec, which was missing. - The MCLK of the codec is connected to the SYS_CLKOUT2 of omap2420. The SYS_CLKOUT2 needs to be running at 12MHz. - Add the pinctrl entries to configure the pins for GPIO118 and SYS_CLKOUT2 - Set DMIC clk mode for GPIO1 - Set DMIC data in for GPIO2 - Select 2V for the DMIC bias - Add fixed regulators for the codec Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
76 lines
1.8 KiB
Plaintext
76 lines
1.8 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include "omap2420-n8x0-common.dtsi"
|
|
|
|
/ {
|
|
model = "Nokia N810";
|
|
compatible = "nokia,n810", "nokia,n8x0", "ti,omap2420", "ti,omap2";
|
|
|
|
vio_ape: vio_ape {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vio_ape";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
v28_aic: v28_aic {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "v28_aic";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
};
|
|
|
|
&omap2420_pmx {
|
|
mcbsp2_pins: mcbsp2_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP2420_CORE_IOPAD(0x0124, PIN_INPUT | MUX_MODE1) /* eac_ac_sclk.mcbsp2_clkx */
|
|
OMAP2420_CORE_IOPAD(0x0125, PIN_INPUT | MUX_MODE1) /* eac_ac_fs.mcbsp2_fsx */
|
|
OMAP2420_CORE_IOPAD(0x0126, PIN_INPUT | MUX_MODE1) /* eac_ac_din.mcbsp2_dr */
|
|
OMAP2420_CORE_IOPAD(0x0127, PIN_OUTPUT | MUX_MODE1) /* eac_ac_dout.mcbsp2_dx */
|
|
>;
|
|
};
|
|
|
|
aic33_pins: aic33_pins {
|
|
pinctrl-single,pins = <
|
|
OMAP2420_CORE_IOPAD(0x0129, PIN_OUTPUT | MUX_MODE3) /* eac_ac_rst.gpio118 */
|
|
OMAP2420_CORE_IOPAD(0x00e8, PIN_OUTPUT | MUX_MODE2) /* vlynq_tx1.sys_clkout2 */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
aic33@18 {
|
|
compatible = "ti,tlv320aic33";
|
|
reg = <0x18>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&aic33_pins>;
|
|
|
|
gpio-reset = <&gpio4 22 GPIO_ACTIVE_LOW>; /* gpio118 */
|
|
|
|
ai3x-gpio-func = <
|
|
10 /* AIC3X_GPIO1_FUNC_DIGITAL_MIC_MODCLK */
|
|
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
|
|
>;
|
|
ai3x-micbias-vg = <1>; /* 2V */
|
|
|
|
AVDD-supply = <&v28_aic>;
|
|
DRVDD-supply = <&v28_aic>;
|
|
IOVDD-supply = <&vio_ape>;
|
|
DVDD-supply = <&vio_ape>;
|
|
|
|
assigned-clocks = <&sys_clkout2_src>, <&sys_clkout2>;
|
|
assigned-clock-parents = <&func_96m_ck>;
|
|
assigned-clock-rates = <0>, <12000000>;
|
|
};
|
|
};
|
|
|
|
&mcbsp2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcbsp2_pins>;
|
|
|
|
status = "okay";
|
|
};
|