mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
abe60a3a7a
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.
The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
389 lines
11 KiB
Plaintext
389 lines
11 KiB
Plaintext
/*
|
|
* Device Tree Source for the Axis ARTPEC-6 SoC
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively,
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use,
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/dma/nbpfaxi.h>
|
|
#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "axis,artpec6";
|
|
interrupt-parent = <&intc>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0>;
|
|
next-level-cache = <&pl310>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <1>;
|
|
next-level-cache = <&pl310>;
|
|
};
|
|
};
|
|
|
|
syscon: syscon@f8000000 {
|
|
compatible = "axis,artpec6-syscon", "syscon";
|
|
reg = <0xf8000000 0x48>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2", "arm,psci";
|
|
method = "smc";
|
|
psci_version = <0x84000000>;
|
|
cpu_on = <0x84000003>;
|
|
system_reset = <0x84000009>;
|
|
};
|
|
|
|
scu@faf00000 {
|
|
compatible = "arm,cortex-a9-scu";
|
|
reg = <0xfaf00000 0x58>;
|
|
};
|
|
|
|
/* Main external clock driving CPU and peripherals */
|
|
ext_clk: ext_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <50000000>;
|
|
};
|
|
|
|
eth_phy_ref_clk: eth_phy_ref_clk {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <125000000>;
|
|
};
|
|
|
|
clkctrl: clkctrl@f8000000 {
|
|
#clock-cells = <1>;
|
|
compatible = "axis,artpec6-clkctrl";
|
|
reg = <0xf8000000 0x48>;
|
|
clocks = <&ext_clk>;
|
|
clock-names = "sys_refclk";
|
|
};
|
|
|
|
gtimer@faf00200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0xfaf00200 0x20>;
|
|
interrupts = <GIC_PPI 11 0xf01>;
|
|
clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
|
|
};
|
|
|
|
timer@faf00600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xfaf00600 0x20>;
|
|
interrupts = <GIC_PPI 13 0xf04>;
|
|
clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
intc: interrupt-controller@faf01000 {
|
|
interrupt-controller;
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
|
|
};
|
|
|
|
pl310: cache-controller@faf10000 {
|
|
compatible = "arm,pl310-cache";
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
reg = <0xfaf10000 0x1000>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
arm,data-latency = <1 1 1>;
|
|
arm,tag-latency = <1 1 1>;
|
|
arm,filter-ranges = <0x0 0x80000000>;
|
|
arm,double-linefill = <1>;
|
|
arm,double-linefill-incr = <0>;
|
|
arm,double-linefill-wrap = <0>;
|
|
prefetch-data = <1>;
|
|
prefetch-instr = <1>;
|
|
arm,prefetch-offset = <0>;
|
|
arm,prefetch-drop = <1>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
};
|
|
|
|
/*
|
|
* Both pci nodes cannot be enabled at the same time,
|
|
* leave the unwanted node as disabled.
|
|
*/
|
|
pcie: pcie@f8050000 {
|
|
compatible = "axis,artpec6-pcie", "snps,dw-pcie";
|
|
reg = <0xf8050000 0x2000
|
|
0xf8040000 0x1000
|
|
0xc0000000 0x2000>;
|
|
reg-names = "dbi", "phy", "config";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
/* downstream I/O */
|
|
ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
|
|
/* non-prefetchable memory */
|
|
0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
|
|
num-lanes = <2>;
|
|
bus-range = <0x00 0xff>;
|
|
interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
|
|
axis,syscon-pcie = <&syscon>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie_ep: pcie_ep@f8050000 {
|
|
compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
|
|
reg = <0xf8050000 0x2000
|
|
0xf8051000 0x2000
|
|
0xf8040000 0x1000
|
|
0xc0000000 0x20000000>;
|
|
reg-names = "dbi", "dbi2", "phy", "addr_space";
|
|
num-ib-windows = <6>;
|
|
num-ob-windows = <2>;
|
|
num-lanes = <2>;
|
|
axis,syscon-pcie = <&syscon>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pinctrl@f801d000 {
|
|
compatible = "axis,artpec6-pinctrl";
|
|
reg = <0xf801d000 0x400>;
|
|
|
|
pinctrl_uart0: uart0grp {
|
|
function = "uart0";
|
|
groups = "uart0grp2";
|
|
bias-pull-up;
|
|
};
|
|
pinctrl_uart1: uart1grp {
|
|
function = "uart1";
|
|
groups = "uart1grp0";
|
|
bias-pull-up;
|
|
};
|
|
pinctrl_uart2: uart2grp {
|
|
function = "uart2";
|
|
groups = "uart2grp1";
|
|
bias-pull-up;
|
|
};
|
|
pinctrl_uart3: uart3grp {
|
|
function = "uart3";
|
|
groups = "uart3grp0";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
amba@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <0x1>;
|
|
#size-cells = <0x1>;
|
|
ranges;
|
|
dma-ranges;
|
|
|
|
crypto@f4264000 {
|
|
compatible = "axis,artpec6-crypto";
|
|
reg = <0xf4264000 0x4000>;
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
dma0: dma@f8019000 {
|
|
compatible = "renesas,nbpfaxi64dmac8b16";
|
|
reg = <0xf8019000 0x400>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
|
|
<GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch12",
|
|
"ch12", "ch13", "ch14", "ch15";
|
|
clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
|
|
#dma-cells = <2>;
|
|
dma-channels = <8>;
|
|
dma-requests = <8>;
|
|
};
|
|
dma1: dma@f8019400 {
|
|
compatible = "renesas,nbpfaxi64dmac8b16";
|
|
reg = <0xf8019400 0x400>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
|
|
<GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch12",
|
|
"ch12", "ch13", "ch14", "ch15";
|
|
clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
|
|
#dma-cells = <2>;
|
|
dma-channels = <8>;
|
|
dma-requests = <8>;
|
|
};
|
|
|
|
ethernet: ethernet@f8010000 {
|
|
clock-names = "stmmaceth", "ptp_ref";
|
|
clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
|
|
<&clkctrl ARTPEC6_CLK_PTP_REF>;
|
|
compatible = "snps,dwmac-4.10a", "snps,dwmac";
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "macirq", "eth_lpi";
|
|
reg = <0xf8010000 0x4000>;
|
|
|
|
snps,axi-config = <&stmmac_axi_setup>;
|
|
snps,mtl-rx-config = <&mtl_rx_setup>;
|
|
snps,mtl-tx-config = <&mtl_tx_setup>;
|
|
|
|
snps,txpbl = <8>;
|
|
snps,rxpbl = <2>;
|
|
snps,aal;
|
|
snps,tso;
|
|
|
|
status = "disabled";
|
|
|
|
stmmac_axi_setup: stmmac-axi-config {
|
|
snps,wr_osr_lmt = <1>;
|
|
snps,rd_osr_lmt = <15>;
|
|
/* If FB is disabled, the AXI master chooses
|
|
* a burst length of any value less than the
|
|
* maximum enabled burst length
|
|
* (all lesser burst length enables are redundant).
|
|
*/
|
|
snps,blen = <0 0 0 0 16 0 0>;
|
|
};
|
|
|
|
mtl_rx_setup: rx-queues-config {
|
|
snps,rx-queues-to-use = <1>;
|
|
queue0 {};
|
|
};
|
|
|
|
mtl_tx_setup: tx-queues-config {
|
|
snps,tx-queues-to-use = <2>;
|
|
queue0 {};
|
|
queue1 {};
|
|
};
|
|
};
|
|
|
|
uart0: serial@f8036000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0xf8036000 0x1000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
|
|
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
|
|
clock-names = "uart_clk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
|
|
<&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
uart1: serial@f8037000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0xf8037000 0x1000>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
|
|
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
|
|
clock-names = "uart_clk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
|
|
<&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
uart2: serial@f8038000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0xf8038000 0x1000>;
|
|
interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
|
|
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
|
|
clock-names = "uart_clk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
|
|
<&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
uart3: serial@f8039000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0xf8039000 0x1000>;
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
|
|
<&clkctrl ARTPEC6_CLK_UART_PCLK>;
|
|
clock-names = "uart_clk", "apb_pclk";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
|
|
<&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|