mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-20 10:44:23 +08:00
abe60a3a7a
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.
The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
463 lines
10 KiB
Plaintext
463 lines
10 KiB
Plaintext
/*
|
|
* Copyright 2016 Linaro Ltd
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "arm,realview-eb";
|
|
|
|
chosen { };
|
|
|
|
aliases {
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
serial2 = &serial2;
|
|
serial3 = &serial3;
|
|
i2c0 = &i2c;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
/* 128 MiB memory @ 0x0 */
|
|
reg = <0x00000000 0x08000000>;
|
|
};
|
|
|
|
/* The voltage to the MMC card is hardwired at 3.3V */
|
|
vmmc: fixedregulator@0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vmmc";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
xtal24mhz: xtal24mhz@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
timclk: timclk@1M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <24>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
mclk: mclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
kmiclk: kmiclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
sspclk: sspclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
uartclk: uartclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
wdogclk: wdogclk@24M {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-factor-clock";
|
|
clock-div = <1>;
|
|
clock-mult = <1>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
|
|
/* FIXME: this actually hangs off the PLL clocks */
|
|
pclk: pclk@0 {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
flash0@40000000 {
|
|
/* 2 * 32MiB NOR Flash memory */
|
|
compatible = "arm,versatile-flash", "cfi-flash";
|
|
reg = <0x40000000 0x04000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
flash1@44000000 {
|
|
/* 2 * 32MiB NOR Flash memory */
|
|
compatible = "arm,versatile-flash", "cfi-flash";
|
|
reg = <0x44000000 0x04000000>;
|
|
bank-width = <4>;
|
|
};
|
|
|
|
/* SMSC LAN91C111 ethernet with PHY and EEPROM */
|
|
ethernet: ethernet@4e000000 {
|
|
compatible = "smsc,lan91c111";
|
|
reg = <0x4e000000 0x10000>;
|
|
/*
|
|
* This means the adapter can be accessed with 8, 16 or
|
|
* 32 bit reads/writes.
|
|
*/
|
|
reg-io-width = <7>;
|
|
};
|
|
|
|
usb: usb@4f000000 {
|
|
compatible = "nxp,usb-isp1761";
|
|
reg = <0x4f000000 0x20000>;
|
|
port1-otg;
|
|
};
|
|
|
|
bridge {
|
|
compatible = "ti,ths8134a", "ti,ths8134";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
vga_bridge_in: endpoint {
|
|
remote-endpoint = <&clcd_pads>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
vga_bridge_out: endpoint {
|
|
remote-endpoint = <&vga_con_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vga {
|
|
compatible = "vga-connector";
|
|
|
|
port {
|
|
vga_con_in: endpoint {
|
|
remote-endpoint = <&vga_bridge_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* These peripherals are inside the FPGA */
|
|
fpga {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
|
|
syscon: syscon@10000000 {
|
|
compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
|
|
reg = <0x10000000 0x1000>;
|
|
|
|
led@08.0 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x01>;
|
|
label = "versatile:0";
|
|
linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
led@08.1 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x02>;
|
|
label = "versatile:1";
|
|
linux,default-trigger = "mmc0";
|
|
default-state = "off";
|
|
};
|
|
led@08.2 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x04>;
|
|
label = "versatile:2";
|
|
linux,default-trigger = "cpu0";
|
|
default-state = "off";
|
|
};
|
|
led@08.3 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x08>;
|
|
label = "versatile:3";
|
|
default-state = "off";
|
|
};
|
|
led@08.4 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x10>;
|
|
label = "versatile:4";
|
|
default-state = "off";
|
|
};
|
|
led@08.5 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x20>;
|
|
label = "versatile:5";
|
|
default-state = "off";
|
|
};
|
|
led@08.6 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x40>;
|
|
label = "versatile:6";
|
|
default-state = "off";
|
|
};
|
|
led@08.7 {
|
|
compatible = "register-bit-led";
|
|
offset = <0x08>;
|
|
mask = <0x80>;
|
|
label = "versatile:7";
|
|
default-state = "off";
|
|
};
|
|
oscclk0: osc0@0c {
|
|
compatible = "arm,syscon-icst307";
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x0C>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk1: osc1@10 {
|
|
compatible = "arm,syscon-icst307";
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x10>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk2: osc2@14 {
|
|
compatible = "arm,syscon-icst307";
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x14>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk3: osc3@18 {
|
|
compatible = "arm,syscon-icst307";
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x18>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
oscclk4: osc4@1c {
|
|
compatible = "arm,syscon-icst307";
|
|
#clock-cells = <0>;
|
|
lock-offset = <0x20>;
|
|
vco-offset = <0x1c>;
|
|
clocks = <&xtal24mhz>;
|
|
};
|
|
};
|
|
|
|
i2c: i2c@10002000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "arm,versatile-i2c";
|
|
reg = <0x10002000 0x1000>;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1338";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
aaci: aaci@10004000 {
|
|
compatible = "arm,pl041", "arm,primecell";
|
|
reg = <0x10004000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
mmc: mmcsd@10005000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
reg = <0x10005000 0x1000>;
|
|
|
|
/* Due to frequent FIFO overruns, use just 500 kHz */
|
|
max-frequency = <500000>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
clocks = <&mclk>, <&pclk>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
vmmc-supply = <&vmmc>;
|
|
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
|
wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
kmi0: kmi@10006000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x10006000 0x1000>;
|
|
clocks = <&kmiclk>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
kmi1: kmi@10007000 {
|
|
compatible = "arm,pl050", "arm,primecell";
|
|
reg = <0x10007000 0x1000>;
|
|
clocks = <&kmiclk>, <&pclk>;
|
|
clock-names = "KMIREFCLK", "apb_pclk";
|
|
};
|
|
|
|
charlcd: fpga_charlcd: charlcd@10008000 {
|
|
compatible = "arm,versatile-lcd";
|
|
reg = <0x10008000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
serial0: serial@10009000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x10009000 0x1000>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
serial1: serial@1000a000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x1000a000 0x1000>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
serial2: serial@1000b000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x1000b000 0x1000>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
serial3: serial@1000c000 {
|
|
compatible = "arm,pl011", "arm,primecell";
|
|
reg = <0x1000c000 0x1000>;
|
|
clocks = <&uartclk>, <&pclk>;
|
|
clock-names = "uartclk", "apb_pclk";
|
|
};
|
|
|
|
ssp: spi@1000d000 {
|
|
compatible = "arm,pl022", "arm,primecell";
|
|
reg = <0x1000d000 0x1000>;
|
|
clocks = <&sspclk>, <&pclk>;
|
|
clock-names = "SSPCLK", "apb_pclk";
|
|
};
|
|
|
|
wdog: watchdog@10010000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0x10010000 0x1000>;
|
|
clocks = <&wdogclk>, <&pclk>;
|
|
clock-names = "wdogclk", "apb_pclk";
|
|
status = "disabled";
|
|
};
|
|
|
|
timer01: timer@10011000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x10011000 0x1000>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
};
|
|
|
|
timer23: timer@10012000 {
|
|
compatible = "arm,sp804", "arm,primecell";
|
|
reg = <0x10012000 0x1000>;
|
|
clocks = <&timclk>, <&timclk>, <&pclk>;
|
|
clock-names = "timer1", "timer2", "apb_pclk";
|
|
};
|
|
|
|
gpio0: gpio@10013000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x10013000 0x1000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gpio1: gpio@10014000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x10014000 0x1000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
gpio2: gpio@10015000 {
|
|
compatible = "arm,pl061", "arm,primecell";
|
|
reg = <0x10015000 0x1000>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
rtc: rtc@10017000 {
|
|
compatible = "arm,pl031", "arm,primecell";
|
|
reg = <0x10017000 0x1000>;
|
|
clocks = <&pclk>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
clcd: clcd@10020000 {
|
|
compatible = "arm,pl111", "arm,primecell";
|
|
reg = <0x10020000 0x1000>;
|
|
interrupt-names = "combined";
|
|
clocks = <&oscclk0>, <&pclk>;
|
|
clock-names = "clcdclk", "apb_pclk";
|
|
/* 1024x768 16bpp @65MHz works fine */
|
|
max-memory-bandwidth = <95000000>;
|
|
|
|
port {
|
|
clcd_pads: endpoint {
|
|
remote-endpoint = <&vga_bridge_in>;
|
|
arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|