mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 06:24:53 +08:00
ad68bb9f7a
This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well. Also, various places in the kernel had to be patched to use __raw_read/__raw_write. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
372 lines
9.3 KiB
ArmAsm
372 lines
9.3 KiB
ArmAsm
/*
|
|
* Low-level PXA250/210 sleep/wakeUp support
|
|
*
|
|
* Initial SA1110 code:
|
|
* Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
|
|
*
|
|
* Adapted for PXA by Nicolas Pitre:
|
|
* Copyright (c) 2002 Monta Vista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <mach/hardware.h>
|
|
#include <mach/smemc.h>
|
|
#include <mach/pxa2xx-regs.h>
|
|
|
|
#define MDREFR_KDIV 0x200a4000 // all banks
|
|
#define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0
|
|
|
|
.text
|
|
|
|
pxa_cpu_save_cp:
|
|
@ get coprocessor registers
|
|
mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
|
|
mrc p15, 0, r4, c15, c1, 0 @ CP access reg
|
|
mrc p15, 0, r5, c13, c0, 0 @ PID
|
|
mrc p15, 0, r6, c3, c0, 0 @ domain ID
|
|
mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
|
|
mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
|
|
mrc p15, 0, r9, c1, c0, 0 @ control reg
|
|
|
|
bic r3, r3, #2 @ clear frequency change bit
|
|
|
|
@ store them plus current virtual stack ptr on stack
|
|
mov r10, sp
|
|
stmfd sp!, {r3 - r10}
|
|
|
|
mov pc, lr
|
|
|
|
pxa_cpu_save_sp:
|
|
@ preserve phys address of stack
|
|
mov r0, sp
|
|
str lr, [sp, #-4]!
|
|
bl sleep_phys_sp
|
|
ldr r1, =sleep_save_sp
|
|
str r0, [r1]
|
|
ldr pc, [sp], #4
|
|
|
|
#ifdef CONFIG_PXA3xx
|
|
/*
|
|
* pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
|
|
*
|
|
* NOTE: unfortunately, pxa_cpu_save_cp can not be reused here since
|
|
* the auxiliary control register address is different between pxa3xx
|
|
* and pxa{25x,27x}
|
|
*/
|
|
|
|
ENTRY(pxa3xx_cpu_suspend)
|
|
|
|
#ifndef CONFIG_IWMMXT
|
|
mra r2, r3, acc0
|
|
#endif
|
|
stmfd sp!, {r2 - r12, lr} @ save registers on stack
|
|
|
|
mrc p14, 0, r3, c6, c0, 0 @ clock configuration, for turbo mode
|
|
mrc p15, 0, r4, c15, c1, 0 @ CP access reg
|
|
mrc p15, 0, r5, c13, c0, 0 @ PID
|
|
mrc p15, 0, r6, c3, c0, 0 @ domain ID
|
|
mrc p15, 0, r7, c2, c0, 0 @ translation table base addr
|
|
mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
|
|
mrc p15, 0, r9, c1, c0, 0 @ control reg
|
|
|
|
bic r3, r3, #2 @ clear frequency change bit
|
|
|
|
@ store them plus current virtual stack ptr on stack
|
|
mov r10, sp
|
|
stmfd sp!, {r3 - r10}
|
|
|
|
@ store physical address of stack pointer
|
|
mov r0, sp
|
|
bl sleep_phys_sp
|
|
ldr r1, =sleep_save_sp
|
|
str r0, [r1]
|
|
|
|
@ clean data cache
|
|
bl xsc3_flush_kern_cache_all
|
|
|
|
mov r0, #0x06 @ S2D3C4 mode
|
|
mcr p14, 0, r0, c7, c0, 0 @ enter sleep
|
|
|
|
20: b 20b @ waiting for sleep
|
|
|
|
.data
|
|
.align 5
|
|
/*
|
|
* pxa3xx_cpu_resume
|
|
*/
|
|
|
|
ENTRY(pxa3xx_cpu_resume)
|
|
|
|
mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
|
|
msr cpsr_c, r0
|
|
|
|
ldr r0, sleep_save_sp @ stack phys addr
|
|
ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
|
|
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
|
|
mcr p15, 0, r1, c7, c10, 4 @ drain write (&fill) buffer
|
|
mcr p15, 0, r1, c7, c5, 4 @ flush prefetch buffer
|
|
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
|
|
|
|
mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
|
|
mcr p15, 0, r4, c15, c1, 0 @ CP access reg
|
|
mcr p15, 0, r5, c13, c0, 0 @ PID
|
|
mcr p15, 0, r6, c3, c0, 0 @ domain ID
|
|
mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
|
|
mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
|
|
|
|
@ temporarily map resume_turn_on_mmu into the page table,
|
|
@ otherwise prefetch abort occurs after MMU is turned on
|
|
mov r1, r7
|
|
bic r1, r1, #0x00ff
|
|
bic r1, r1, #0x3f00
|
|
ldr r2, =0x542e
|
|
|
|
adr r3, resume_turn_on_mmu
|
|
mov r3, r3, lsr #20
|
|
orr r4, r2, r3, lsl #20
|
|
ldr r5, [r1, r3, lsl #2]
|
|
str r4, [r1, r3, lsl #2]
|
|
|
|
@ Mapping page table address in the page table
|
|
mov r6, r1, lsr #20
|
|
orr r7, r2, r6, lsl #20
|
|
ldr r8, [r1, r6, lsl #2]
|
|
str r7, [r1, r6, lsl #2]
|
|
|
|
ldr r2, =pxa3xx_resume_after_mmu @ absolute virtual address
|
|
b resume_turn_on_mmu @ cache align execution
|
|
|
|
.text
|
|
pxa3xx_resume_after_mmu:
|
|
/* restore the temporary mapping */
|
|
str r5, [r1, r3, lsl #2]
|
|
str r8, [r1, r6, lsl #2]
|
|
b resume_after_mmu
|
|
|
|
#endif /* CONFIG_PXA3xx */
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
/*
|
|
* pxa27x_cpu_suspend()
|
|
*
|
|
* Forces CPU into sleep state.
|
|
*
|
|
* r0 = value for PWRMODE M field for desired sleep state
|
|
*/
|
|
|
|
ENTRY(pxa27x_cpu_suspend)
|
|
|
|
#ifndef CONFIG_IWMMXT
|
|
mra r2, r3, acc0
|
|
#endif
|
|
stmfd sp!, {r2 - r12, lr} @ save registers on stack
|
|
|
|
bl pxa_cpu_save_cp
|
|
|
|
mov r5, r0 @ save sleep mode
|
|
bl pxa_cpu_save_sp
|
|
|
|
@ clean data cache
|
|
bl xscale_flush_kern_cache_all
|
|
|
|
@ Put the processor to sleep
|
|
@ (also workaround for sighting 28071)
|
|
|
|
@ prepare value for sleep mode
|
|
mov r1, r5 @ sleep mode
|
|
|
|
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
|
|
mov r2, #UNCACHED_PHYS_0
|
|
|
|
@ prepare SDRAM refresh settings
|
|
ldr r4, =MDREFR
|
|
ldr r5, [r4]
|
|
|
|
@ enable SDRAM self-refresh mode
|
|
orr r5, r5, #MDREFR_SLFRSH
|
|
|
|
@ set SDCLKx divide-by-2 bits (this is part of a workaround for Errata 50)
|
|
ldr r6, =MDREFR_KDIV
|
|
orr r5, r5, r6
|
|
|
|
@ Intel PXA270 Specification Update notes problems sleeping
|
|
@ with core operating above 91 MHz
|
|
@ (see Errata 50, ...processor does not exit from sleep...)
|
|
|
|
ldr r6, =CCCR
|
|
ldr r8, [r6] @ keep original value for resume
|
|
|
|
ldr r7, =CCCR_SLEEP @ prepare CCCR sleep value
|
|
mov r0, #0x2 @ prepare value for CLKCFG
|
|
|
|
@ align execution to a cache line
|
|
b pxa_cpu_do_suspend
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA25x
|
|
/*
|
|
* pxa25x_cpu_suspend()
|
|
*
|
|
* Forces CPU into sleep state.
|
|
*
|
|
* r0 = value for PWRMODE M field for desired sleep state
|
|
*/
|
|
|
|
ENTRY(pxa25x_cpu_suspend)
|
|
stmfd sp!, {r2 - r12, lr} @ save registers on stack
|
|
|
|
bl pxa_cpu_save_cp
|
|
|
|
mov r5, r0 @ save sleep mode
|
|
bl pxa_cpu_save_sp
|
|
|
|
@ clean data cache
|
|
bl xscale_flush_kern_cache_all
|
|
|
|
@ prepare value for sleep mode
|
|
mov r1, r5 @ sleep mode
|
|
|
|
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
|
|
mov r2, #UNCACHED_PHYS_0
|
|
|
|
@ prepare SDRAM refresh settings
|
|
ldr r4, =MDREFR
|
|
ldr r5, [r4]
|
|
|
|
@ enable SDRAM self-refresh mode
|
|
orr r5, r5, #MDREFR_SLFRSH
|
|
|
|
@ Intel PXA255 Specification Update notes problems
|
|
@ about suspending with PXBus operating above 133MHz
|
|
@ (see Errata 31, GPIO output signals, ... unpredictable in sleep
|
|
@
|
|
@ We keep the change-down close to the actual suspend on SDRAM
|
|
@ as possible to eliminate messing about with the refresh clock
|
|
@ as the system will restore with the original speed settings
|
|
@
|
|
@ Ben Dooks, 13-Sep-2004
|
|
|
|
ldr r6, =CCCR
|
|
ldr r8, [r6] @ keep original value for resume
|
|
|
|
@ ensure x1 for run and turbo mode with memory clock
|
|
bic r7, r8, #CCCR_M_MASK | CCCR_N_MASK
|
|
orr r7, r7, #(1<<5) | (2<<7)
|
|
|
|
@ check that the memory frequency is within limits
|
|
and r14, r7, #CCCR_L_MASK
|
|
teq r14, #1
|
|
bicne r7, r7, #CCCR_L_MASK
|
|
orrne r7, r7, #1 @@ 99.53MHz
|
|
|
|
@ get ready for the change
|
|
|
|
@ note, turbo is not preserved over sleep so there is no
|
|
@ point in preserving it here. we save it on the stack with the
|
|
@ other CP registers instead.
|
|
mov r0, #0
|
|
mcr p14, 0, r0, c6, c0, 0
|
|
orr r0, r0, #2 @ initiate change bit
|
|
b pxa_cpu_do_suspend
|
|
#endif
|
|
|
|
.ltorg
|
|
.align 5
|
|
pxa_cpu_do_suspend:
|
|
|
|
@ All needed values are now in registers.
|
|
@ These last instructions should be in cache
|
|
|
|
@ initiate the frequency change...
|
|
str r7, [r6]
|
|
mcr p14, 0, r0, c6, c0, 0
|
|
|
|
@ restore the original cpu speed value for resume
|
|
str r8, [r6]
|
|
|
|
@ need 6 13-MHz cycles before changing PWRMODE
|
|
@ just set frequency to 91-MHz... 6*91/13 = 42
|
|
|
|
mov r0, #42
|
|
10: subs r0, r0, #1
|
|
bne 10b
|
|
|
|
@ Do not reorder...
|
|
@ Intel PXA270 Specification Update notes problems performing
|
|
@ external accesses after SDRAM is put in self-refresh mode
|
|
@ (see Errata 39 ...hangs when entering self-refresh mode)
|
|
|
|
@ force address lines low by reading at physical address 0
|
|
ldr r3, [r2]
|
|
|
|
@ put SDRAM into self-refresh
|
|
str r5, [r4]
|
|
|
|
@ enter sleep mode
|
|
mcr p14, 0, r1, c7, c0, 0 @ PWRMODE
|
|
|
|
20: b 20b @ loop waiting for sleep
|
|
|
|
/*
|
|
* pxa_cpu_resume()
|
|
*
|
|
* entry point from bootloader into kernel during resume
|
|
*
|
|
* Note: Yes, part of the following code is located into the .data section.
|
|
* This is to allow sleep_save_sp to be accessed with a relative load
|
|
* while we can't rely on any MMU translation. We could have put
|
|
* sleep_save_sp in the .text section as well, but some setups might
|
|
* insist on it to be truly read-only.
|
|
*/
|
|
|
|
.data
|
|
.align 5
|
|
ENTRY(pxa_cpu_resume)
|
|
mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE @ set SVC, irqs off
|
|
msr cpsr_c, r0
|
|
|
|
ldr r0, sleep_save_sp @ stack phys addr
|
|
ldr r2, =resume_after_mmu @ its absolute virtual address
|
|
ldmfd r0, {r3 - r9, sp} @ CP regs + virt stack ptr
|
|
|
|
mov r1, #0
|
|
mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
|
|
mcr p15, 0, r1, c7, c7, 0 @ invalidate I & D caches, BTB
|
|
|
|
mcr p14, 0, r3, c6, c0, 0 @ clock configuration, turbo mode.
|
|
mcr p15, 0, r4, c15, c1, 0 @ CP access reg
|
|
mcr p15, 0, r5, c13, c0, 0 @ PID
|
|
mcr p15, 0, r6, c3, c0, 0 @ domain ID
|
|
mcr p15, 0, r7, c2, c0, 0 @ translation table base addr
|
|
mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
|
|
b resume_turn_on_mmu @ cache align execution
|
|
|
|
.align 5
|
|
resume_turn_on_mmu:
|
|
mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, caches, etc.
|
|
|
|
@ Let us ensure we jump to resume_after_mmu only when the mcr above
|
|
@ actually took effect. They call it the "cpwait" operation.
|
|
mrc p15, 0, r1, c2, c0, 0 @ queue a dependency on CP15
|
|
sub pc, r2, r1, lsr #32 @ jump to virtual addr
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
sleep_save_sp:
|
|
.word 0 @ preserve stack phys ptr here
|
|
|
|
.text
|
|
resume_after_mmu:
|
|
ldmfd sp!, {r2, r3}
|
|
#ifndef CONFIG_IWMMXT
|
|
mar acc0, r2, r3
|
|
#endif
|
|
ldmfd sp!, {r4 - r12, pc} @ return to caller
|