mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-14 06:24:53 +08:00
ad68bb9f7a
This is important because on PXA3xx, the physical mapping of SMEMC registers differs from the one on PXA2xx. In order to get PCMCIA working on both PXA2xx and PXA320, the PCMCIA driver was adjusted accordingly as well. Also, various places in the kernel had to be patched to use __raw_read/__raw_write. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
516 lines
12 KiB
C
516 lines
12 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/lpd270.c
|
|
*
|
|
* Support for the LogicPD PXA270 Card Engine.
|
|
* Derived from the mainstone code, which carries these notices:
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: Nov 05, 2002
|
|
* Copyright: MontaVista Software Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/pwm_backlight.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/sizes.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/flash.h>
|
|
|
|
#include <mach/pxa27x.h>
|
|
#include <mach/gpio.h>
|
|
#include <mach/lpd270.h>
|
|
#include <mach/audio.h>
|
|
#include <mach/pxafb.h>
|
|
#include <mach/mmc.h>
|
|
#include <mach/irda.h>
|
|
#include <mach/ohci.h>
|
|
#include <mach/smemc.h>
|
|
|
|
#include "generic.h"
|
|
#include "devices.h"
|
|
|
|
static unsigned long lpd270_pin_config[] __initdata = {
|
|
/* Chip Selects */
|
|
GPIO15_nCS_1, /* Mainboard Flash */
|
|
GPIO78_nCS_2, /* CPLD + Ethernet */
|
|
|
|
/* LCD - 16bpp Active TFT */
|
|
GPIO58_LCD_LDD_0,
|
|
GPIO59_LCD_LDD_1,
|
|
GPIO60_LCD_LDD_2,
|
|
GPIO61_LCD_LDD_3,
|
|
GPIO62_LCD_LDD_4,
|
|
GPIO63_LCD_LDD_5,
|
|
GPIO64_LCD_LDD_6,
|
|
GPIO65_LCD_LDD_7,
|
|
GPIO66_LCD_LDD_8,
|
|
GPIO67_LCD_LDD_9,
|
|
GPIO68_LCD_LDD_10,
|
|
GPIO69_LCD_LDD_11,
|
|
GPIO70_LCD_LDD_12,
|
|
GPIO71_LCD_LDD_13,
|
|
GPIO72_LCD_LDD_14,
|
|
GPIO73_LCD_LDD_15,
|
|
GPIO74_LCD_FCLK,
|
|
GPIO75_LCD_LCLK,
|
|
GPIO76_LCD_PCLK,
|
|
GPIO77_LCD_BIAS,
|
|
GPIO16_PWM0_OUT, /* Backlight */
|
|
|
|
/* USB Host */
|
|
GPIO88_USBH1_PWR,
|
|
GPIO89_USBH1_PEN,
|
|
|
|
/* AC97 */
|
|
GPIO28_AC97_BITCLK,
|
|
GPIO29_AC97_SDATA_IN_0,
|
|
GPIO30_AC97_SDATA_OUT,
|
|
GPIO31_AC97_SYNC,
|
|
GPIO45_AC97_SYSCLK,
|
|
|
|
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
|
};
|
|
|
|
static unsigned int lpd270_irq_enabled;
|
|
|
|
static void lpd270_mask_irq(unsigned int irq)
|
|
{
|
|
int lpd270_irq = irq - LPD270_IRQ(0);
|
|
|
|
__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
|
|
|
|
lpd270_irq_enabled &= ~(1 << lpd270_irq);
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
}
|
|
|
|
static void lpd270_unmask_irq(unsigned int irq)
|
|
{
|
|
int lpd270_irq = irq - LPD270_IRQ(0);
|
|
|
|
lpd270_irq_enabled |= 1 << lpd270_irq;
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
}
|
|
|
|
static struct irq_chip lpd270_irq_chip = {
|
|
.name = "CPLD",
|
|
.ack = lpd270_mask_irq,
|
|
.mask = lpd270_mask_irq,
|
|
.unmask = lpd270_unmask_irq,
|
|
};
|
|
|
|
static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
unsigned long pending;
|
|
|
|
pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
|
|
do {
|
|
desc->chip->ack(irq); /* clear useless edge notification */
|
|
if (likely(pending)) {
|
|
irq = LPD270_IRQ(0) + __ffs(pending);
|
|
generic_handle_irq(irq);
|
|
|
|
pending = __raw_readw(LPD270_INT_STATUS) &
|
|
lpd270_irq_enabled;
|
|
}
|
|
} while (pending);
|
|
}
|
|
|
|
static void __init lpd270_init_irq(void)
|
|
{
|
|
int irq;
|
|
|
|
pxa27x_init_irq();
|
|
|
|
__raw_writew(0, LPD270_INT_MASK);
|
|
__raw_writew(0, LPD270_INT_STATUS);
|
|
|
|
/* setup extra LogicPD PXA270 irqs */
|
|
for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
|
|
set_irq_chip(irq, &lpd270_irq_chip);
|
|
set_irq_handler(irq, handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
|
|
set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
static int lpd270_irq_resume(struct sys_device *dev)
|
|
{
|
|
__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
|
|
return 0;
|
|
}
|
|
|
|
static struct sysdev_class lpd270_irq_sysclass = {
|
|
.name = "cpld_irq",
|
|
.resume = lpd270_irq_resume,
|
|
};
|
|
|
|
static struct sys_device lpd270_irq_device = {
|
|
.cls = &lpd270_irq_sysclass,
|
|
};
|
|
|
|
static int __init lpd270_irq_device_init(void)
|
|
{
|
|
int ret = -ENODEV;
|
|
if (machine_is_logicpd_pxa270()) {
|
|
ret = sysdev_class_register(&lpd270_irq_sysclass);
|
|
if (ret == 0)
|
|
ret = sysdev_register(&lpd270_irq_device);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
device_initcall(lpd270_irq_device_init);
|
|
#endif
|
|
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = LPD270_ETH_PHYS,
|
|
.end = (LPD270_ETH_PHYS + 0xfffff),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = LPD270_ETHERNET_IRQ,
|
|
.end = LPD270_ETHERNET_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
static struct resource lpd270_flash_resources[] = {
|
|
[0] = {
|
|
.start = PXA_CS0_PHYS,
|
|
.end = PXA_CS0_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = PXA_CS1_PHYS,
|
|
.end = PXA_CS1_PHYS + SZ_64M - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct mtd_partition lpd270_flash0_partitions[] = {
|
|
{
|
|
.name = "Bootloader",
|
|
.size = 0x00040000,
|
|
.offset = 0,
|
|
.mask_flags = MTD_WRITEABLE /* force read-only */
|
|
}, {
|
|
.name = "Kernel",
|
|
.size = 0x00400000,
|
|
.offset = 0x00040000,
|
|
}, {
|
|
.name = "Filesystem",
|
|
.size = MTDPART_SIZ_FULL,
|
|
.offset = 0x00440000
|
|
},
|
|
};
|
|
|
|
static struct flash_platform_data lpd270_flash_data[2] = {
|
|
{
|
|
.name = "processor-flash",
|
|
.map_name = "cfi_probe",
|
|
.parts = lpd270_flash0_partitions,
|
|
.nr_parts = ARRAY_SIZE(lpd270_flash0_partitions),
|
|
}, {
|
|
.name = "mainboard-flash",
|
|
.map_name = "cfi_probe",
|
|
.parts = NULL,
|
|
.nr_parts = 0,
|
|
}
|
|
};
|
|
|
|
static struct platform_device lpd270_flash_device[2] = {
|
|
{
|
|
.name = "pxa2xx-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &lpd270_flash_data[0],
|
|
},
|
|
.resource = &lpd270_flash_resources[0],
|
|
.num_resources = 1,
|
|
}, {
|
|
.name = "pxa2xx-flash",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &lpd270_flash_data[1],
|
|
},
|
|
.resource = &lpd270_flash_resources[1],
|
|
.num_resources = 1,
|
|
},
|
|
};
|
|
|
|
static struct platform_pwm_backlight_data lpd270_backlight_data = {
|
|
.pwm_id = 0,
|
|
.max_brightness = 1,
|
|
.dft_brightness = 1,
|
|
.pwm_period_ns = 78770,
|
|
};
|
|
|
|
static struct platform_device lpd270_backlight_device = {
|
|
.name = "pwm-backlight",
|
|
.dev = {
|
|
.parent = &pxa27x_device_pwm0.dev,
|
|
.platform_data = &lpd270_backlight_data,
|
|
},
|
|
};
|
|
|
|
/* 5.7" TFT QVGA (LoLo display number 1) */
|
|
static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
|
|
.pixclock = 150000,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.bpp = 16,
|
|
.hsync_len = 0x14,
|
|
.left_margin = 0x28,
|
|
.right_margin = 0x0a,
|
|
.vsync_len = 0x02,
|
|
.upper_margin = 0x08,
|
|
.lower_margin = 0x14,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq057q3dc02 = {
|
|
.modes = &sharp_lq057q3dc02_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 12.1" TFT SVGA (LoLo display number 2) */
|
|
static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
|
|
.pixclock = 50000,
|
|
.xres = 800,
|
|
.yres = 600,
|
|
.bpp = 16,
|
|
.hsync_len = 0x05,
|
|
.left_margin = 0x52,
|
|
.right_margin = 0x05,
|
|
.vsync_len = 0x04,
|
|
.upper_margin = 0x14,
|
|
.lower_margin = 0x0a,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq121s1dg31 = {
|
|
.modes = &sharp_lq121s1dg31_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 3.6" TFT QVGA (LoLo display number 3) */
|
|
static struct pxafb_mode_info sharp_lq036q1da01_mode = {
|
|
.pixclock = 150000,
|
|
.xres = 320,
|
|
.yres = 240,
|
|
.bpp = 16,
|
|
.hsync_len = 0x0e,
|
|
.left_margin = 0x04,
|
|
.right_margin = 0x0a,
|
|
.vsync_len = 0x03,
|
|
.upper_margin = 0x03,
|
|
.lower_margin = 0x03,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq036q1da01 = {
|
|
.modes = &sharp_lq036q1da01_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 6.4" TFT VGA (LoLo display number 5) */
|
|
static struct pxafb_mode_info sharp_lq64d343_mode = {
|
|
.pixclock = 25000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 0x31,
|
|
.left_margin = 0x89,
|
|
.right_margin = 0x19,
|
|
.vsync_len = 0x12,
|
|
.upper_margin = 0x22,
|
|
.lower_margin = 0x00,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq64d343 = {
|
|
.modes = &sharp_lq64d343_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 10.4" TFT VGA (LoLo display number 7) */
|
|
static struct pxafb_mode_info sharp_lq10d368_mode = {
|
|
.pixclock = 25000,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.bpp = 16,
|
|
.hsync_len = 0x31,
|
|
.left_margin = 0x89,
|
|
.right_margin = 0x19,
|
|
.vsync_len = 0x12,
|
|
.upper_margin = 0x22,
|
|
.lower_margin = 0x00,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq10d368 = {
|
|
.modes = &sharp_lq10d368_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
/* 3.5" TFT QVGA (LoLo display number 8) */
|
|
static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
|
|
.pixclock = 150000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 0x0e,
|
|
.left_margin = 0x0a,
|
|
.right_margin = 0x0a,
|
|
.vsync_len = 0x03,
|
|
.upper_margin = 0x05,
|
|
.lower_margin = 0x14,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
};
|
|
|
|
static struct pxafb_mach_info sharp_lq035q7db02_20 = {
|
|
.modes = &sharp_lq035q7db02_20_mode,
|
|
.num_modes = 1,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
|
|
LCD_ALTERNATE_MAPPING,
|
|
};
|
|
|
|
static struct pxafb_mach_info *lpd270_lcd_to_use;
|
|
|
|
static int __init lpd270_set_lcd(char *str)
|
|
{
|
|
if (!strnicmp(str, "lq057q3dc02", 11)) {
|
|
lpd270_lcd_to_use = &sharp_lq057q3dc02;
|
|
} else if (!strnicmp(str, "lq121s1dg31", 11)) {
|
|
lpd270_lcd_to_use = &sharp_lq121s1dg31;
|
|
} else if (!strnicmp(str, "lq036q1da01", 11)) {
|
|
lpd270_lcd_to_use = &sharp_lq036q1da01;
|
|
} else if (!strnicmp(str, "lq64d343", 8)) {
|
|
lpd270_lcd_to_use = &sharp_lq64d343;
|
|
} else if (!strnicmp(str, "lq10d368", 8)) {
|
|
lpd270_lcd_to_use = &sharp_lq10d368;
|
|
} else if (!strnicmp(str, "lq035q7db02-20", 14)) {
|
|
lpd270_lcd_to_use = &sharp_lq035q7db02_20;
|
|
} else {
|
|
printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
__setup("lcd=", lpd270_set_lcd);
|
|
|
|
static struct platform_device *platform_devices[] __initdata = {
|
|
&smc91x_device,
|
|
&lpd270_backlight_device,
|
|
&lpd270_flash_device[0],
|
|
&lpd270_flash_device[1],
|
|
};
|
|
|
|
static struct pxaohci_platform_data lpd270_ohci_platform_data = {
|
|
.port_mode = PMM_PERPORT_MODE,
|
|
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
|
|
};
|
|
|
|
static void __init lpd270_init(void)
|
|
{
|
|
pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
|
|
|
|
pxa_set_ffuart_info(NULL);
|
|
pxa_set_btuart_info(NULL);
|
|
pxa_set_stuart_info(NULL);
|
|
|
|
lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
|
|
lpd270_flash_data[1].width = 4;
|
|
|
|
/*
|
|
* System bus arbiter setting:
|
|
* - Core_Park
|
|
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
|
|
*/
|
|
ARB_CNTRL = ARB_CORE_PARK | 0x234;
|
|
|
|
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
|
|
|
|
pxa_set_ac97_info(NULL);
|
|
|
|
if (lpd270_lcd_to_use != NULL)
|
|
set_pxa_fb_info(lpd270_lcd_to_use);
|
|
|
|
pxa_set_ohci_info(&lpd270_ohci_platform_data);
|
|
}
|
|
|
|
|
|
static struct map_desc lpd270_io_desc[] __initdata = {
|
|
{
|
|
.virtual = LPD270_CPLD_VIRT,
|
|
.pfn = __phys_to_pfn(LPD270_CPLD_PHYS),
|
|
.length = LPD270_CPLD_SIZE,
|
|
.type = MT_DEVICE,
|
|
},
|
|
};
|
|
|
|
static void __init lpd270_map_io(void)
|
|
{
|
|
pxa27x_map_io();
|
|
iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
|
|
|
|
/* for use I SRAM as framebuffer. */
|
|
PSLR |= 0x00000F04;
|
|
PCFR = 0x00000066;
|
|
}
|
|
|
|
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
|
|
/* Maintainer: Peter Barada */
|
|
.boot_params = 0xa0000100,
|
|
.map_io = lpd270_map_io,
|
|
.nr_irqs = LPD270_NR_IRQS,
|
|
.init_irq = lpd270_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = lpd270_init,
|
|
MACHINE_END
|