mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-19 00:54:41 +08:00
d3be83244c
This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
567 lines
13 KiB
C
567 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* zopt2201.c - Support for IDT ZOPT2201 ambient light and UV B sensor
|
|
*
|
|
* Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
|
|
*
|
|
* Datasheet: https://www.idt.com/document/dst/zopt2201-datasheet
|
|
* 7-bit I2C slave addresses 0x53 (default) or 0x52 (programmed)
|
|
*
|
|
* TODO: interrupt support, ALS/UVB raw mode
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/err.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#define ZOPT2201_DRV_NAME "zopt2201"
|
|
|
|
/* Registers */
|
|
#define ZOPT2201_MAIN_CTRL 0x00
|
|
#define ZOPT2201_LS_MEAS_RATE 0x04
|
|
#define ZOPT2201_LS_GAIN 0x05
|
|
#define ZOPT2201_PART_ID 0x06
|
|
#define ZOPT2201_MAIN_STATUS 0x07
|
|
#define ZOPT2201_ALS_DATA 0x0d /* LSB first, 13 to 20 bits */
|
|
#define ZOPT2201_UVB_DATA 0x10 /* LSB first, 13 to 20 bits */
|
|
#define ZOPT2201_UV_COMP_DATA 0x13 /* LSB first, 13 to 20 bits */
|
|
#define ZOPT2201_COMP_DATA 0x16 /* LSB first, 13 to 20 bits */
|
|
#define ZOPT2201_INT_CFG 0x19
|
|
#define ZOPT2201_INT_PST 0x1a
|
|
|
|
#define ZOPT2201_MAIN_CTRL_LS_MODE BIT(3) /* 0 .. ALS, 1 .. UV B */
|
|
#define ZOPT2201_MAIN_CTRL_LS_EN BIT(1)
|
|
|
|
/* Values for ZOPT2201_LS_MEAS_RATE resolution / bit width */
|
|
#define ZOPT2201_MEAS_RES_20BIT 0 /* takes 400 ms */
|
|
#define ZOPT2201_MEAS_RES_19BIT 1 /* takes 200 ms */
|
|
#define ZOPT2201_MEAS_RES_18BIT 2 /* takes 100 ms, default */
|
|
#define ZOPT2201_MEAS_RES_17BIT 3 /* takes 50 ms */
|
|
#define ZOPT2201_MEAS_RES_16BIT 4 /* takes 25 ms */
|
|
#define ZOPT2201_MEAS_RES_13BIT 5 /* takes 3.125 ms */
|
|
#define ZOPT2201_MEAS_RES_SHIFT 4
|
|
|
|
/* Values for ZOPT2201_LS_MEAS_RATE measurement rate */
|
|
#define ZOPT2201_MEAS_FREQ_25MS 0
|
|
#define ZOPT2201_MEAS_FREQ_50MS 1
|
|
#define ZOPT2201_MEAS_FREQ_100MS 2 /* default */
|
|
#define ZOPT2201_MEAS_FREQ_200MS 3
|
|
#define ZOPT2201_MEAS_FREQ_500MS 4
|
|
#define ZOPT2201_MEAS_FREQ_1000MS 5
|
|
#define ZOPT2201_MEAS_FREQ_2000MS 6
|
|
|
|
/* Values for ZOPT2201_LS_GAIN */
|
|
#define ZOPT2201_LS_GAIN_1 0
|
|
#define ZOPT2201_LS_GAIN_3 1
|
|
#define ZOPT2201_LS_GAIN_6 2
|
|
#define ZOPT2201_LS_GAIN_9 3
|
|
#define ZOPT2201_LS_GAIN_18 4
|
|
|
|
/* Values for ZOPT2201_MAIN_STATUS */
|
|
#define ZOPT2201_MAIN_STATUS_POWERON BIT(5)
|
|
#define ZOPT2201_MAIN_STATUS_INT BIT(4)
|
|
#define ZOPT2201_MAIN_STATUS_DRDY BIT(3)
|
|
|
|
#define ZOPT2201_PART_NUMBER 0xb2
|
|
|
|
struct zopt2201_data {
|
|
struct i2c_client *client;
|
|
struct mutex lock;
|
|
u8 gain;
|
|
u8 res;
|
|
u8 rate;
|
|
};
|
|
|
|
static const struct {
|
|
unsigned int gain; /* gain factor */
|
|
unsigned int scale; /* micro lux per count */
|
|
} zopt2201_gain_als[] = {
|
|
{ 1, 19200000 },
|
|
{ 3, 6400000 },
|
|
{ 6, 3200000 },
|
|
{ 9, 2133333 },
|
|
{ 18, 1066666 },
|
|
};
|
|
|
|
static const struct {
|
|
unsigned int gain; /* gain factor */
|
|
unsigned int scale; /* micro W/m2 per count */
|
|
} zopt2201_gain_uvb[] = {
|
|
{ 1, 460800 },
|
|
{ 3, 153600 },
|
|
{ 6, 76800 },
|
|
{ 9, 51200 },
|
|
{ 18, 25600 },
|
|
};
|
|
|
|
static const struct {
|
|
unsigned int bits; /* sensor resolution in bits */
|
|
unsigned long us; /* measurement time in micro seconds */
|
|
} zopt2201_resolution[] = {
|
|
{ 20, 400000 },
|
|
{ 19, 200000 },
|
|
{ 18, 100000 },
|
|
{ 17, 50000 },
|
|
{ 16, 25000 },
|
|
{ 13, 3125 },
|
|
};
|
|
|
|
static const struct {
|
|
unsigned int scale, uscale; /* scale factor as integer + micro */
|
|
u8 gain; /* gain register value */
|
|
u8 res; /* resolution register value */
|
|
} zopt2201_scale_als[] = {
|
|
{ 19, 200000, 0, 5 },
|
|
{ 6, 400000, 1, 5 },
|
|
{ 3, 200000, 2, 5 },
|
|
{ 2, 400000, 0, 4 },
|
|
{ 2, 133333, 3, 5 },
|
|
{ 1, 200000, 0, 3 },
|
|
{ 1, 66666, 4, 5 },
|
|
{ 0, 800000, 1, 4 },
|
|
{ 0, 600000, 0, 2 },
|
|
{ 0, 400000, 2, 4 },
|
|
{ 0, 300000, 0, 1 },
|
|
{ 0, 266666, 3, 4 },
|
|
{ 0, 200000, 2, 3 },
|
|
{ 0, 150000, 0, 0 },
|
|
{ 0, 133333, 4, 4 },
|
|
{ 0, 100000, 2, 2 },
|
|
{ 0, 66666, 4, 3 },
|
|
{ 0, 50000, 2, 1 },
|
|
{ 0, 33333, 4, 2 },
|
|
{ 0, 25000, 2, 0 },
|
|
{ 0, 16666, 4, 1 },
|
|
{ 0, 8333, 4, 0 },
|
|
};
|
|
|
|
static const struct {
|
|
unsigned int scale, uscale; /* scale factor as integer + micro */
|
|
u8 gain; /* gain register value */
|
|
u8 res; /* resolution register value */
|
|
} zopt2201_scale_uvb[] = {
|
|
{ 0, 460800, 0, 5 },
|
|
{ 0, 153600, 1, 5 },
|
|
{ 0, 76800, 2, 5 },
|
|
{ 0, 57600, 0, 4 },
|
|
{ 0, 51200, 3, 5 },
|
|
{ 0, 28800, 0, 3 },
|
|
{ 0, 25600, 4, 5 },
|
|
{ 0, 19200, 1, 4 },
|
|
{ 0, 14400, 0, 2 },
|
|
{ 0, 9600, 2, 4 },
|
|
{ 0, 7200, 0, 1 },
|
|
{ 0, 6400, 3, 4 },
|
|
{ 0, 4800, 2, 3 },
|
|
{ 0, 3600, 0, 0 },
|
|
{ 0, 3200, 4, 4 },
|
|
{ 0, 2400, 2, 2 },
|
|
{ 0, 1600, 4, 3 },
|
|
{ 0, 1200, 2, 1 },
|
|
{ 0, 800, 4, 2 },
|
|
{ 0, 600, 2, 0 },
|
|
{ 0, 400, 4, 1 },
|
|
{ 0, 200, 4, 0 },
|
|
};
|
|
|
|
static int zopt2201_enable_mode(struct zopt2201_data *data, bool uvb_mode)
|
|
{
|
|
u8 out = ZOPT2201_MAIN_CTRL_LS_EN;
|
|
|
|
if (uvb_mode)
|
|
out |= ZOPT2201_MAIN_CTRL_LS_MODE;
|
|
|
|
return i2c_smbus_write_byte_data(data->client, ZOPT2201_MAIN_CTRL, out);
|
|
}
|
|
|
|
static int zopt2201_read(struct zopt2201_data *data, u8 reg)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int tries = 10;
|
|
u8 buf[3];
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = zopt2201_enable_mode(data, reg == ZOPT2201_UVB_DATA);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
while (tries--) {
|
|
unsigned long t = zopt2201_resolution[data->res].us;
|
|
|
|
if (t <= 20000)
|
|
usleep_range(t, t + 1000);
|
|
else
|
|
msleep(t / 1000);
|
|
ret = i2c_smbus_read_byte_data(client, ZOPT2201_MAIN_STATUS);
|
|
if (ret < 0)
|
|
goto fail;
|
|
if (ret & ZOPT2201_MAIN_STATUS_DRDY)
|
|
break;
|
|
}
|
|
|
|
if (tries < 0) {
|
|
ret = -ETIMEDOUT;
|
|
goto fail;
|
|
}
|
|
|
|
ret = i2c_smbus_read_i2c_block_data(client, reg, sizeof(buf), buf);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
ret = i2c_smbus_write_byte_data(client, ZOPT2201_MAIN_CTRL, 0x00);
|
|
if (ret < 0)
|
|
goto fail;
|
|
mutex_unlock(&data->lock);
|
|
|
|
return get_unaligned_le24(&buf[0]);
|
|
|
|
fail:
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_chan_spec zopt2201_channels[] = {
|
|
{
|
|
.type = IIO_LIGHT,
|
|
.address = ZOPT2201_ALS_DATA,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
|
|
},
|
|
{
|
|
.type = IIO_INTENSITY,
|
|
.modified = 1,
|
|
.channel2 = IIO_MOD_LIGHT_UV,
|
|
.address = ZOPT2201_UVB_DATA,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
|
BIT(IIO_CHAN_INFO_SCALE),
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME),
|
|
},
|
|
{
|
|
.type = IIO_UVINDEX,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
|
|
},
|
|
};
|
|
|
|
static int zopt2201_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct zopt2201_data *data = iio_priv(indio_dev);
|
|
u64 tmp;
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
ret = zopt2201_read(data, chan->address);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_PROCESSED:
|
|
ret = zopt2201_read(data, ZOPT2201_UVB_DATA);
|
|
if (ret < 0)
|
|
return ret;
|
|
*val = ret * 18 *
|
|
(1 << (20 - zopt2201_resolution[data->res].bits)) /
|
|
zopt2201_gain_uvb[data->gain].gain;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->address) {
|
|
case ZOPT2201_ALS_DATA:
|
|
*val = zopt2201_gain_als[data->gain].scale;
|
|
break;
|
|
case ZOPT2201_UVB_DATA:
|
|
*val = zopt2201_gain_uvb[data->gain].scale;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*val2 = 1000000;
|
|
*val2 *= (1 << (zopt2201_resolution[data->res].bits - 13));
|
|
tmp = div_s64(*val * 1000000ULL, *val2);
|
|
*val = div_s64_rem(tmp, 1000000, val2);
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
*val = 0;
|
|
*val2 = zopt2201_resolution[data->res].us;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int zopt2201_set_resolution(struct zopt2201_data *data, u8 res)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, ZOPT2201_LS_MEAS_RATE,
|
|
(res << ZOPT2201_MEAS_RES_SHIFT) |
|
|
data->rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->res = res;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zopt2201_write_resolution(struct zopt2201_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i, ret;
|
|
|
|
if (val != 0)
|
|
return -EINVAL;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zopt2201_resolution); i++)
|
|
if (val2 == zopt2201_resolution[i].us) {
|
|
mutex_lock(&data->lock);
|
|
ret = zopt2201_set_resolution(data, i);
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int zopt2201_set_gain(struct zopt2201_data *data, u8 gain)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_smbus_write_byte_data(data->client, ZOPT2201_LS_GAIN, gain);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->gain = gain;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zopt2201_write_scale_als_by_idx(struct zopt2201_data *data, int idx)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = zopt2201_set_resolution(data, zopt2201_scale_als[idx].res);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
ret = zopt2201_set_gain(data, zopt2201_scale_als[idx].gain);
|
|
|
|
unlock:
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int zopt2201_write_scale_als(struct zopt2201_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zopt2201_scale_als); i++)
|
|
if (val == zopt2201_scale_als[i].scale &&
|
|
val2 == zopt2201_scale_als[i].uscale) {
|
|
return zopt2201_write_scale_als_by_idx(data, i);
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int zopt2201_write_scale_uvb_by_idx(struct zopt2201_data *data, int idx)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = zopt2201_set_resolution(data, zopt2201_scale_als[idx].res);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
ret = zopt2201_set_gain(data, zopt2201_scale_als[idx].gain);
|
|
|
|
unlock:
|
|
mutex_unlock(&data->lock);
|
|
return ret;
|
|
}
|
|
|
|
static int zopt2201_write_scale_uvb(struct zopt2201_data *data,
|
|
int val, int val2)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zopt2201_scale_uvb); i++)
|
|
if (val == zopt2201_scale_uvb[i].scale &&
|
|
val2 == zopt2201_scale_uvb[i].uscale)
|
|
return zopt2201_write_scale_uvb_by_idx(data, i);
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int zopt2201_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val, int val2, long mask)
|
|
{
|
|
struct zopt2201_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
return zopt2201_write_resolution(data, val, val2);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->address) {
|
|
case ZOPT2201_ALS_DATA:
|
|
return zopt2201_write_scale_als(data, val, val2);
|
|
case ZOPT2201_UVB_DATA:
|
|
return zopt2201_write_scale_uvb(data, val, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static ssize_t zopt2201_show_int_time_available(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
size_t len = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zopt2201_resolution); i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06lu ",
|
|
zopt2201_resolution[i].us);
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEV_ATTR_INT_TIME_AVAIL(zopt2201_show_int_time_available);
|
|
|
|
static ssize_t zopt2201_show_als_scale_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
ssize_t len = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zopt2201_scale_als); i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ",
|
|
zopt2201_scale_als[i].scale,
|
|
zopt2201_scale_als[i].uscale);
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static ssize_t zopt2201_show_uvb_scale_avail(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
ssize_t len = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zopt2201_scale_uvb); i++)
|
|
len += scnprintf(buf + len, PAGE_SIZE - len, "%d.%06u ",
|
|
zopt2201_scale_uvb[i].scale,
|
|
zopt2201_scale_uvb[i].uscale);
|
|
buf[len - 1] = '\n';
|
|
|
|
return len;
|
|
}
|
|
|
|
static IIO_DEVICE_ATTR(in_illuminance_scale_available, 0444,
|
|
zopt2201_show_als_scale_avail, NULL, 0);
|
|
static IIO_DEVICE_ATTR(in_intensity_uv_scale_available, 0444,
|
|
zopt2201_show_uvb_scale_avail, NULL, 0);
|
|
|
|
static struct attribute *zopt2201_attributes[] = {
|
|
&iio_dev_attr_integration_time_available.dev_attr.attr,
|
|
&iio_dev_attr_in_illuminance_scale_available.dev_attr.attr,
|
|
&iio_dev_attr_in_intensity_uv_scale_available.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group zopt2201_attribute_group = {
|
|
.attrs = zopt2201_attributes,
|
|
};
|
|
|
|
static const struct iio_info zopt2201_info = {
|
|
.read_raw = zopt2201_read_raw,
|
|
.write_raw = zopt2201_write_raw,
|
|
.attrs = &zopt2201_attribute_group,
|
|
};
|
|
|
|
static int zopt2201_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct zopt2201_data *data;
|
|
struct iio_dev *indio_dev;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_READ_I2C_BLOCK))
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = i2c_smbus_read_byte_data(client, ZOPT2201_PART_ID);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ret != ZOPT2201_PART_NUMBER)
|
|
return -ENODEV;
|
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
data->client = client;
|
|
mutex_init(&data->lock);
|
|
|
|
indio_dev->info = &zopt2201_info;
|
|
indio_dev->channels = zopt2201_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(zopt2201_channels);
|
|
indio_dev->name = ZOPT2201_DRV_NAME;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
data->rate = ZOPT2201_MEAS_FREQ_100MS;
|
|
ret = zopt2201_set_resolution(data, ZOPT2201_MEAS_RES_18BIT);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = zopt2201_set_gain(data, ZOPT2201_LS_GAIN_3);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id zopt2201_id[] = {
|
|
{ "zopt2201", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, zopt2201_id);
|
|
|
|
static struct i2c_driver zopt2201_driver = {
|
|
.driver = {
|
|
.name = ZOPT2201_DRV_NAME,
|
|
},
|
|
.probe = zopt2201_probe,
|
|
.id_table = zopt2201_id,
|
|
};
|
|
|
|
module_i2c_driver(zopt2201_driver);
|
|
|
|
MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>");
|
|
MODULE_DESCRIPTION("IDT ZOPT2201 ambient light and UV B sensor driver");
|
|
MODULE_LICENSE("GPL");
|