linux/drivers/acpi/cppc_acpi.c
Linus Torvalds 9434467959 ACPI updates for 6.9-rc1
- Rearrange Device Check and Bus Check notification handling in the
    ACPI device hotplug code to make it get the "enabled" _STA bit into
    account (Rafael Wysocki).
 
  - Modify acpi_processor_add() to skip processors with the "enabled"
    _STA bit clear, as per the specification (Rafael Wysocki).
 
  - Stop failing Device Check notification handling without a valid
    reason (Rafael Wysocki).
 
  - Defer enumeration of devices that depend on a device with an ACPI
    device ID equalt to INTC10CF to address probe ordering issues on
    some platforms (Wentong Wu).
 
  - Constify acpi_bus_type (Ricardo Marliere).
 
  - Make the ACPI-specific suspend-to-idle code take the Low-Power S0
    Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki).
 
  - Add ACPI IRQ override quirks for some new platforms (Sergey
    Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
    Nicolas Haye).
 
  - Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
    Shevchenko).
 
  - Fix a memory leak in acpi_processor_power_exit() (Armin Wolf).
 
  - Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
    properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus).
 
  - Prevent false-positive static checker warnings from triggering by
    intializing some variables in the ACPI thermal code to zero (Colin
    Ian King).
 
  - Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
    make that function generic (Hans de Goede).
 
  - Make the ACPI backlight code handle fetching EDID that is longer than
    256 bytes (Mario Limonciello).
 
  - Skip initialization of GHES_ASSIST structures for Machine Check
    Architecture in APEI (Avadhut Naik).
 
  - Convert several plaform drivers in the ACPI subsystem to using a
    remove callback that returns void (Uwe Kleine-König).
 
  - Drop the long-deprecated custom_method debugfs interface that is
    problematic from the security standpoint (Rafael Wysocki).
 
  - Use %pe in a couple of places in the ACPI code for easier error
    decoding (Onkarnath).
 
  - Fix register width information handling during system memory
    accesses in the ACPI CPPC library (Jarred White).
 
  - Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
    library (Perry Yuan).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmXvJFISHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxtWMP/0IySac8M0jkQJrlJeIqXHhV/akwpe5H
 kWtuT8bZ8iiQmB+orDW+hpLhdATc2vv1XPRApnkkd9QtrLEVBBIoLrDxzUJy/tzv
 0qgj2s0A1pc6gRpX1y3Wc94U3PnTzOodVpjZq6L9rGQ3enBkIU7H3CWs2LIq3VfB
 lUSY1dmVB2rv1MHfsoxTM6eiRYEZSAc3v8b0jpIjfaHsxdUPsqZLMPXTVzgGWfu4
 ePCN1oDKX9xQkVV9/hnxBYwTSO+ySBq1jgtG2PaqRmJXIaZR/24A1tHTr2UQvTss
 x39WnjWIrKOwO6TfwoX8KlsdBaJeQo0biH42QQV08UIYUWfQmoUVVffZMPGrlGvV
 F3vPMLZADMROJhtfoD4hXIcj+Asa/uqi6lKN1mctb0akozOGlHbX4yNXq4MZS9Hj
 sXO9gMXgWjh5cnC/NSekcdVbLbARj2g7JWdpq1dZmgh9eaXP07/D6DcrVbcdZSHs
 ySb6DNNAEXPL0PgSU+cLiwRRH43C+ilVz/OMrdHxb4jSuAVDluD4hwi1IwwB4feG
 k0s9i0OQKAkC/9UXcJrlTFs1fE4ftZ0gYVZDiSeDDy9FUo1ZYCRhOP7yfrjoCHhH
 Wc7sllUKHsy1TPi3Wh3ANxUaZhviNn59rL3JPAKeX1Qjx2LB+qHS6j08/v/F3m6W
 Srp8VJsItb/D
 =Yngi
 -----END PGP SIGNATURE-----

Merge tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI updates from Rafael Wysocki:
 "These modify the ACPI device events and processor enumeration code to
  take the 'enabled' _STA bit into account as mandated by the ACPI
  specification, convert several platform drivers to using a remove
  callback that returns void, add some new quirks for ACPI IRQ override
  and other things, address assorted issues and clean up code.

  Specifics:

   - Rearrange Device Check and Bus Check notification handling in the
     ACPI device hotplug code to make it get the "enabled" _STA bit into
     account (Rafael Wysocki)

   - Modify acpi_processor_add() to skip processors with the "enabled"
     _STA bit clear, as per the specification (Rafael Wysocki)

   - Stop failing Device Check notification handling without a valid
     reason (Rafael Wysocki)

   - Defer enumeration of devices that depend on a device with an ACPI
     device ID equalt to INTC10CF to address probe ordering issues on
     some platforms (Wentong Wu)

   - Constify acpi_bus_type (Ricardo Marliere)

   - Make the ACPI-specific suspend-to-idle code take the Low-Power S0
     Idle MSFT UUID into account on non-AMD systems (Rafael Wysocki)

   - Add ACPI IRQ override quirks for some new platforms (Sergey
     Kalinichev, Maxim Kudinov, Alexey Froloff, Sviatoslav Harasymchuk,
     Nicolas Haye)

   - Make the NFIT parsing code use acpi_evaluate_dsm_typed() (Andy
     Shevchenko)

   - Fix a memory leak in acpi_processor_power_exit() (Armin Wolf)

   - Make it possible to quirk the CSI-2 and MIPI DisCo for Imaging
     properties parsing and add a quirk for Dell XPS 9315 (Sakari Ailus)

   - Prevent false-positive static checker warnings from triggering by
     intializing some variables in the ACPI thermal code to zero (Colin
     Ian King)

   - Add DELL0501 handling to acpi_quirk_skip_serdev_enumeration() and
     make that function generic (Hans de Goede)

   - Make the ACPI backlight code handle fetching EDID that is longer
     than 256 bytes (Mario Limonciello)

   - Skip initialization of GHES_ASSIST structures for Machine Check
     Architecture in APEI (Avadhut Naik)

   - Convert several plaform drivers in the ACPI subsystem to using a
     remove callback that returns void (Uwe Kleine-König)

   - Drop the long-deprecated custom_method debugfs interface that is
     problematic from the security standpoint (Rafael Wysocki)

   - Use %pe in a couple of places in the ACPI code for easier error
     decoding (Onkarnath)

   - Fix register width information handling during system memory
     accesses in the ACPI CPPC library (Jarred White)

   - Add AMD CPPC V2 support for family 17h processors to the ACPI CPPC
     library (Perry Yuan)"

* tag 'acpi-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits)
  ACPI: resource: Use IRQ override on Maibenben X565
  ACPI: CPPC: Use access_width over bit_width for system memory accesses
  ACPI: CPPC: enable AMD CPPC V2 support for family 17h processors
  ACPI: APEI: Skip initialization of GHES_ASSIST structures for Machine Check Architecture
  ACPI: scan: Consolidate Device Check and Bus Check notification handling
  ACPI: scan: Rework Device Check and Bus Check notification handling
  ACPI: scan: Make acpi_processor_add() check the device enabled bit
  ACPI: scan: Relocate acpi_bus_trim_one()
  ACPI: scan: Fix device check notification handling
  ACPI: resource: Add MAIBENBEN X577 to irq1_edge_low_force_override
  ACPI: pfr_update: Convert to platform remove callback returning void
  ACPI: pfr_telemetry: Convert to platform remove callback returning void
  ACPI: fan: Convert to platform remove callback returning void
  ACPI: GED: Convert to platform remove callback returning void
  ACPI: DPTF: Convert to platform remove callback returning void
  ACPI: AGDI: Convert to platform remove callback returning void
  ACPI: TAD: Convert to platform remove callback returning void
  ACPI: APEI: GHES: Convert to platform remove callback returning void
  ACPI: property: Polish ignoring bad data nodes
  ACPI: thermal_lib: Initialize temp_decik to zero
  ...
2024-03-13 11:54:05 -07:00

1901 lines
54 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* CPPC (Collaborative Processor Performance Control) methods used by CPUfreq drivers.
*
* (C) Copyright 2014, 2015 Linaro Ltd.
* Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
*
* CPPC describes a few methods for controlling CPU performance using
* information from a per CPU table called CPC. This table is described in
* the ACPI v5.0+ specification. The table consists of a list of
* registers which may be memory mapped or hardware registers and also may
* include some static integer values.
*
* CPU performance is on an abstract continuous scale as against a discretized
* P-state scale which is tied to CPU frequency only. In brief, the basic
* operation involves:
*
* - OS makes a CPU performance request. (Can provide min and max bounds)
*
* - Platform (such as BMC) is free to optimize request within requested bounds
* depending on power/thermal budgets etc.
*
* - Platform conveys its decision back to OS
*
* The communication between OS and platform occurs through another medium
* called (PCC) Platform Communication Channel. This is a generic mailbox like
* mechanism which includes doorbell semantics to indicate register updates.
* See drivers/mailbox/pcc.c for details on PCC.
*
* Finer details about the PCC and CPPC spec are available in the ACPI v5.1 and
* above specifications.
*/
#define pr_fmt(fmt) "ACPI CPPC: " fmt
#include <linux/delay.h>
#include <linux/iopoll.h>
#include <linux/ktime.h>
#include <linux/rwsem.h>
#include <linux/wait.h>
#include <linux/topology.h>
#include <linux/dmi.h>
#include <linux/units.h>
#include <asm/unaligned.h>
#include <acpi/cppc_acpi.h>
struct cppc_pcc_data {
struct pcc_mbox_chan *pcc_channel;
void __iomem *pcc_comm_addr;
bool pcc_channel_acquired;
unsigned int deadline_us;
unsigned int pcc_mpar, pcc_mrtt, pcc_nominal;
bool pending_pcc_write_cmd; /* Any pending/batched PCC write cmds? */
bool platform_owns_pcc; /* Ownership of PCC subspace */
unsigned int pcc_write_cnt; /* Running count of PCC write commands */
/*
* Lock to provide controlled access to the PCC channel.
*
* For performance critical usecases(currently cppc_set_perf)
* We need to take read_lock and check if channel belongs to OSPM
* before reading or writing to PCC subspace
* We need to take write_lock before transferring the channel
* ownership to the platform via a Doorbell
* This allows us to batch a number of CPPC requests if they happen
* to originate in about the same time
*
* For non-performance critical usecases(init)
* Take write_lock for all purposes which gives exclusive access
*/
struct rw_semaphore pcc_lock;
/* Wait queue for CPUs whose requests were batched */
wait_queue_head_t pcc_write_wait_q;
ktime_t last_cmd_cmpl_time;
ktime_t last_mpar_reset;
int mpar_count;
int refcount;
};
/* Array to represent the PCC channel per subspace ID */
static struct cppc_pcc_data *pcc_data[MAX_PCC_SUBSPACES];
/* The cpu_pcc_subspace_idx contains per CPU subspace ID */
static DEFINE_PER_CPU(int, cpu_pcc_subspace_idx);
/*
* The cpc_desc structure contains the ACPI register details
* as described in the per CPU _CPC tables. The details
* include the type of register (e.g. PCC, System IO, FFH etc.)
* and destination addresses which lets us READ/WRITE CPU performance
* information using the appropriate I/O methods.
*/
static DEFINE_PER_CPU(struct cpc_desc *, cpc_desc_ptr);
/* pcc mapped address + header size + offset within PCC subspace */
#define GET_PCC_VADDR(offs, pcc_ss_id) (pcc_data[pcc_ss_id]->pcc_comm_addr + \
0x8 + (offs))
/* Check if a CPC register is in PCC */
#define CPC_IN_PCC(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
(cpc)->cpc_entry.reg.space_id == \
ACPI_ADR_SPACE_PLATFORM_COMM)
/* Check if a CPC register is in SystemMemory */
#define CPC_IN_SYSTEM_MEMORY(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
(cpc)->cpc_entry.reg.space_id == \
ACPI_ADR_SPACE_SYSTEM_MEMORY)
/* Check if a CPC register is in SystemIo */
#define CPC_IN_SYSTEM_IO(cpc) ((cpc)->type == ACPI_TYPE_BUFFER && \
(cpc)->cpc_entry.reg.space_id == \
ACPI_ADR_SPACE_SYSTEM_IO)
/* Evaluates to True if reg is a NULL register descriptor */
#define IS_NULL_REG(reg) ((reg)->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY && \
(reg)->address == 0 && \
(reg)->bit_width == 0 && \
(reg)->bit_offset == 0 && \
(reg)->access_width == 0)
/* Evaluates to True if an optional cpc field is supported */
#define CPC_SUPPORTED(cpc) ((cpc)->type == ACPI_TYPE_INTEGER ? \
!!(cpc)->cpc_entry.int_value : \
!IS_NULL_REG(&(cpc)->cpc_entry.reg))
/*
* Arbitrary Retries in case the remote processor is slow to respond
* to PCC commands. Keeping it high enough to cover emulators where
* the processors run painfully slow.
*/
#define NUM_RETRIES 500ULL
#define OVER_16BTS_MASK ~0xFFFFULL
#define define_one_cppc_ro(_name) \
static struct kobj_attribute _name = \
__ATTR(_name, 0444, show_##_name, NULL)
#define to_cpc_desc(a) container_of(a, struct cpc_desc, kobj)
#define show_cppc_data(access_fn, struct_name, member_name) \
static ssize_t show_##member_name(struct kobject *kobj, \
struct kobj_attribute *attr, char *buf) \
{ \
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj); \
struct struct_name st_name = {0}; \
int ret; \
\
ret = access_fn(cpc_ptr->cpu_id, &st_name); \
if (ret) \
return ret; \
\
return sysfs_emit(buf, "%llu\n", \
(u64)st_name.member_name); \
} \
define_one_cppc_ro(member_name)
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, highest_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_nonlinear_perf);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, lowest_freq);
show_cppc_data(cppc_get_perf_caps, cppc_perf_caps, nominal_freq);
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, reference_perf);
show_cppc_data(cppc_get_perf_ctrs, cppc_perf_fb_ctrs, wraparound_time);
/* Check for valid access_width, otherwise, fallback to using bit_width */
#define GET_BIT_WIDTH(reg) ((reg)->access_width ? (8 << ((reg)->access_width - 1)) : (reg)->bit_width)
/* Shift and apply the mask for CPC reads/writes */
#define MASK_VAL(reg, val) ((val) >> ((reg)->bit_offset & \
GENMASK(((reg)->bit_width), 0)))
static ssize_t show_feedback_ctrs(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
struct cpc_desc *cpc_ptr = to_cpc_desc(kobj);
struct cppc_perf_fb_ctrs fb_ctrs = {0};
int ret;
ret = cppc_get_perf_ctrs(cpc_ptr->cpu_id, &fb_ctrs);
if (ret)
return ret;
return sysfs_emit(buf, "ref:%llu del:%llu\n",
fb_ctrs.reference, fb_ctrs.delivered);
}
define_one_cppc_ro(feedback_ctrs);
static struct attribute *cppc_attrs[] = {
&feedback_ctrs.attr,
&reference_perf.attr,
&wraparound_time.attr,
&highest_perf.attr,
&lowest_perf.attr,
&lowest_nonlinear_perf.attr,
&nominal_perf.attr,
&nominal_freq.attr,
&lowest_freq.attr,
NULL
};
ATTRIBUTE_GROUPS(cppc);
static const struct kobj_type cppc_ktype = {
.sysfs_ops = &kobj_sysfs_ops,
.default_groups = cppc_groups,
};
static int check_pcc_chan(int pcc_ss_id, bool chk_err_bit)
{
int ret, status;
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
pcc_ss_data->pcc_comm_addr;
if (!pcc_ss_data->platform_owns_pcc)
return 0;
/*
* Poll PCC status register every 3us(delay_us) for maximum of
* deadline_us(timeout_us) until PCC command complete bit is set(cond)
*/
ret = readw_relaxed_poll_timeout(&generic_comm_base->status, status,
status & PCC_CMD_COMPLETE_MASK, 3,
pcc_ss_data->deadline_us);
if (likely(!ret)) {
pcc_ss_data->platform_owns_pcc = false;
if (chk_err_bit && (status & PCC_ERROR_MASK))
ret = -EIO;
}
if (unlikely(ret))
pr_err("PCC check channel failed for ss: %d. ret=%d\n",
pcc_ss_id, ret);
return ret;
}
/*
* This function transfers the ownership of the PCC to the platform
* So it must be called while holding write_lock(pcc_lock)
*/
static int send_pcc_cmd(int pcc_ss_id, u16 cmd)
{
int ret = -EIO, i;
struct cppc_pcc_data *pcc_ss_data = pcc_data[pcc_ss_id];
struct acpi_pcct_shared_memory __iomem *generic_comm_base =
pcc_ss_data->pcc_comm_addr;
unsigned int time_delta;
/*
* For CMD_WRITE we know for a fact the caller should have checked
* the channel before writing to PCC space
*/
if (cmd == CMD_READ) {
/*
* If there are pending cpc_writes, then we stole the channel
* before write completion, so first send a WRITE command to
* platform
*/
if (pcc_ss_data->pending_pcc_write_cmd)
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
ret = check_pcc_chan(pcc_ss_id, false);
if (ret)
goto end;
} else /* CMD_WRITE */
pcc_ss_data->pending_pcc_write_cmd = FALSE;
/*
* Handle the Minimum Request Turnaround Time(MRTT)
* "The minimum amount of time that OSPM must wait after the completion
* of a command before issuing the next command, in microseconds"
*/
if (pcc_ss_data->pcc_mrtt) {
time_delta = ktime_us_delta(ktime_get(),
pcc_ss_data->last_cmd_cmpl_time);
if (pcc_ss_data->pcc_mrtt > time_delta)
udelay(pcc_ss_data->pcc_mrtt - time_delta);
}
/*
* Handle the non-zero Maximum Periodic Access Rate(MPAR)
* "The maximum number of periodic requests that the subspace channel can
* support, reported in commands per minute. 0 indicates no limitation."
*
* This parameter should be ideally zero or large enough so that it can
* handle maximum number of requests that all the cores in the system can
* collectively generate. If it is not, we will follow the spec and just
* not send the request to the platform after hitting the MPAR limit in
* any 60s window
*/
if (pcc_ss_data->pcc_mpar) {
if (pcc_ss_data->mpar_count == 0) {
time_delta = ktime_ms_delta(ktime_get(),
pcc_ss_data->last_mpar_reset);
if ((time_delta < 60 * MSEC_PER_SEC) && pcc_ss_data->last_mpar_reset) {
pr_debug("PCC cmd for subspace %d not sent due to MPAR limit",
pcc_ss_id);
ret = -EIO;
goto end;
}
pcc_ss_data->last_mpar_reset = ktime_get();
pcc_ss_data->mpar_count = pcc_ss_data->pcc_mpar;
}
pcc_ss_data->mpar_count--;
}
/* Write to the shared comm region. */
writew_relaxed(cmd, &generic_comm_base->command);
/* Flip CMD COMPLETE bit */
writew_relaxed(0, &generic_comm_base->status);
pcc_ss_data->platform_owns_pcc = true;
/* Ring doorbell */
ret = mbox_send_message(pcc_ss_data->pcc_channel->mchan, &cmd);
if (ret < 0) {
pr_err("Err sending PCC mbox message. ss: %d cmd:%d, ret:%d\n",
pcc_ss_id, cmd, ret);
goto end;
}
/* wait for completion and check for PCC error bit */
ret = check_pcc_chan(pcc_ss_id, true);
if (pcc_ss_data->pcc_mrtt)
pcc_ss_data->last_cmd_cmpl_time = ktime_get();
if (pcc_ss_data->pcc_channel->mchan->mbox->txdone_irq)
mbox_chan_txdone(pcc_ss_data->pcc_channel->mchan, ret);
else
mbox_client_txdone(pcc_ss_data->pcc_channel->mchan, ret);
end:
if (cmd == CMD_WRITE) {
if (unlikely(ret)) {
for_each_possible_cpu(i) {
struct cpc_desc *desc = per_cpu(cpc_desc_ptr, i);
if (!desc)
continue;
if (desc->write_cmd_id == pcc_ss_data->pcc_write_cnt)
desc->write_cmd_status = ret;
}
}
pcc_ss_data->pcc_write_cnt++;
wake_up_all(&pcc_ss_data->pcc_write_wait_q);
}
return ret;
}
static void cppc_chan_tx_done(struct mbox_client *cl, void *msg, int ret)
{
if (ret < 0)
pr_debug("TX did not complete: CMD sent:%x, ret:%d\n",
*(u16 *)msg, ret);
else
pr_debug("TX completed. CMD sent:%x, ret:%d\n",
*(u16 *)msg, ret);
}
static struct mbox_client cppc_mbox_cl = {
.tx_done = cppc_chan_tx_done,
.knows_txdone = true,
};
static int acpi_get_psd(struct cpc_desc *cpc_ptr, acpi_handle handle)
{
int result = -EFAULT;
acpi_status status = AE_OK;
struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
struct acpi_buffer format = {sizeof("NNNNN"), "NNNNN"};
struct acpi_buffer state = {0, NULL};
union acpi_object *psd = NULL;
struct acpi_psd_package *pdomain;
status = acpi_evaluate_object_typed(handle, "_PSD", NULL,
&buffer, ACPI_TYPE_PACKAGE);
if (status == AE_NOT_FOUND) /* _PSD is optional */
return 0;
if (ACPI_FAILURE(status))
return -ENODEV;
psd = buffer.pointer;
if (!psd || psd->package.count != 1) {
pr_debug("Invalid _PSD data\n");
goto end;
}
pdomain = &(cpc_ptr->domain_info);
state.length = sizeof(struct acpi_psd_package);
state.pointer = pdomain;
status = acpi_extract_package(&(psd->package.elements[0]),
&format, &state);
if (ACPI_FAILURE(status)) {
pr_debug("Invalid _PSD data for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->num_entries != ACPI_PSD_REV0_ENTRIES) {
pr_debug("Unknown _PSD:num_entries for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->revision != ACPI_PSD_REV0_REVISION) {
pr_debug("Unknown _PSD:revision for CPU: %d\n", cpc_ptr->cpu_id);
goto end;
}
if (pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ALL &&
pdomain->coord_type != DOMAIN_COORD_TYPE_SW_ANY &&
pdomain->coord_type != DOMAIN_COORD_TYPE_HW_ALL) {
pr_debug("Invalid _PSD:coord_type for CPU:%d\n", cpc_ptr->cpu_id);
goto end;
}
result = 0;
end:
kfree(buffer.pointer);
return result;
}
bool acpi_cpc_valid(void)
{
struct cpc_desc *cpc_ptr;
int cpu;
if (acpi_disabled)
return false;
for_each_present_cpu(cpu) {
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
if (!cpc_ptr)
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(acpi_cpc_valid);
bool cppc_allow_fast_switch(void)
{
struct cpc_register_resource *desired_reg;
struct cpc_desc *cpc_ptr;
int cpu;
for_each_possible_cpu(cpu) {
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
desired_reg = &cpc_ptr->cpc_regs[DESIRED_PERF];
if (!CPC_IN_SYSTEM_MEMORY(desired_reg) &&
!CPC_IN_SYSTEM_IO(desired_reg))
return false;
}
return true;
}
EXPORT_SYMBOL_GPL(cppc_allow_fast_switch);
/**
* acpi_get_psd_map - Map the CPUs in the freq domain of a given cpu
* @cpu: Find all CPUs that share a domain with cpu.
* @cpu_data: Pointer to CPU specific CPPC data including PSD info.
*
* Return: 0 for success or negative value for err.
*/
int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data)
{
struct cpc_desc *cpc_ptr, *match_cpc_ptr;
struct acpi_psd_package *match_pdomain;
struct acpi_psd_package *pdomain;
int count_target, i;
/*
* Now that we have _PSD data from all CPUs, let's setup P-state
* domain info.
*/
cpc_ptr = per_cpu(cpc_desc_ptr, cpu);
if (!cpc_ptr)
return -EFAULT;
pdomain = &(cpc_ptr->domain_info);
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
if (pdomain->num_processors <= 1)
return 0;
/* Validate the Domain info */
count_target = pdomain->num_processors;
if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ALL)
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ALL;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_HW_ALL)
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_HW;
else if (pdomain->coord_type == DOMAIN_COORD_TYPE_SW_ANY)
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_ANY;
for_each_possible_cpu(i) {
if (i == cpu)
continue;
match_cpc_ptr = per_cpu(cpc_desc_ptr, i);
if (!match_cpc_ptr)
goto err_fault;
match_pdomain = &(match_cpc_ptr->domain_info);
if (match_pdomain->domain != pdomain->domain)
continue;
/* Here i and cpu are in the same domain */
if (match_pdomain->num_processors != count_target)
goto err_fault;
if (pdomain->coord_type != match_pdomain->coord_type)
goto err_fault;
cpumask_set_cpu(i, cpu_data->shared_cpu_map);
}
return 0;
err_fault:
/* Assume no coordination on any error parsing domain info */
cpumask_clear(cpu_data->shared_cpu_map);
cpumask_set_cpu(cpu, cpu_data->shared_cpu_map);
cpu_data->shared_type = CPUFREQ_SHARED_TYPE_NONE;
return -EFAULT;
}
EXPORT_SYMBOL_GPL(acpi_get_psd_map);
static int register_pcc_channel(int pcc_ss_idx)
{
struct pcc_mbox_chan *pcc_chan;
u64 usecs_lat;
if (pcc_ss_idx >= 0) {
pcc_chan = pcc_mbox_request_channel(&cppc_mbox_cl, pcc_ss_idx);
if (IS_ERR(pcc_chan)) {
pr_err("Failed to find PCC channel for subspace %d\n",
pcc_ss_idx);
return -ENODEV;
}
pcc_data[pcc_ss_idx]->pcc_channel = pcc_chan;
/*
* cppc_ss->latency is just a Nominal value. In reality
* the remote processor could be much slower to reply.
* So add an arbitrary amount of wait on top of Nominal.
*/
usecs_lat = NUM_RETRIES * pcc_chan->latency;
pcc_data[pcc_ss_idx]->deadline_us = usecs_lat;
pcc_data[pcc_ss_idx]->pcc_mrtt = pcc_chan->min_turnaround_time;
pcc_data[pcc_ss_idx]->pcc_mpar = pcc_chan->max_access_rate;
pcc_data[pcc_ss_idx]->pcc_nominal = pcc_chan->latency;
pcc_data[pcc_ss_idx]->pcc_comm_addr =
acpi_os_ioremap(pcc_chan->shmem_base_addr,
pcc_chan->shmem_size);
if (!pcc_data[pcc_ss_idx]->pcc_comm_addr) {
pr_err("Failed to ioremap PCC comm region mem for %d\n",
pcc_ss_idx);
return -ENOMEM;
}
/* Set flag so that we don't come here for each CPU. */
pcc_data[pcc_ss_idx]->pcc_channel_acquired = true;
}
return 0;
}
/**
* cpc_ffh_supported() - check if FFH reading supported
*
* Check if the architecture has support for functional fixed hardware
* read/write capability.
*
* Return: true for supported, false for not supported
*/
bool __weak cpc_ffh_supported(void)
{
return false;
}
/**
* cpc_supported_by_cpu() - check if CPPC is supported by CPU
*
* Check if the architectural support for CPPC is present even
* if the _OSC hasn't prescribed it
*
* Return: true for supported, false for not supported
*/
bool __weak cpc_supported_by_cpu(void)
{
return false;
}
/**
* pcc_data_alloc() - Allocate the pcc_data memory for pcc subspace
* @pcc_ss_id: PCC Subspace index as in the PCC client ACPI package.
*
* Check and allocate the cppc_pcc_data memory.
* In some processor configurations it is possible that same subspace
* is shared between multiple CPUs. This is seen especially in CPUs
* with hardware multi-threading support.
*
* Return: 0 for success, errno for failure
*/
static int pcc_data_alloc(int pcc_ss_id)
{
if (pcc_ss_id < 0 || pcc_ss_id >= MAX_PCC_SUBSPACES)
return -EINVAL;
if (pcc_data[pcc_ss_id]) {
pcc_data[pcc_ss_id]->refcount++;
} else {
pcc_data[pcc_ss_id] = kzalloc(sizeof(struct cppc_pcc_data),
GFP_KERNEL);
if (!pcc_data[pcc_ss_id])
return -ENOMEM;
pcc_data[pcc_ss_id]->refcount++;
}
return 0;
}
/*
* An example CPC table looks like the following.
*
* Name (_CPC, Package() {
* 17, // NumEntries
* 1, // Revision
* ResourceTemplate() {Register(PCC, 32, 0, 0x120, 2)}, // Highest Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x124, 2)}, // Nominal Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x128, 2)}, // Lowest Nonlinear Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x12C, 2)}, // Lowest Performance
* ResourceTemplate() {Register(PCC, 32, 0, 0x130, 2)}, // Guaranteed Performance Register
* ResourceTemplate() {Register(PCC, 32, 0, 0x110, 2)}, // Desired Performance Register
* ResourceTemplate() {Register(SystemMemory, 0, 0, 0, 0)},
* ...
* ...
* ...
* }
* Each Register() encodes how to access that specific register.
* e.g. a sample PCC entry has the following encoding:
*
* Register (
* PCC, // AddressSpaceKeyword
* 8, // RegisterBitWidth
* 8, // RegisterBitOffset
* 0x30, // RegisterAddress
* 9, // AccessSize (subspace ID)
* )
*/
#ifndef arch_init_invariance_cppc
static inline void arch_init_invariance_cppc(void) { }
#endif
/**
* acpi_cppc_processor_probe - Search for per CPU _CPC objects.
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
*
* Return: 0 for success or negative value for err.
*/
int acpi_cppc_processor_probe(struct acpi_processor *pr)
{
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *out_obj, *cpc_obj;
struct cpc_desc *cpc_ptr;
struct cpc_reg *gas_t;
struct device *cpu_dev;
acpi_handle handle = pr->handle;
unsigned int num_ent, i, cpc_rev;
int pcc_subspace_id = -1;
acpi_status status;
int ret = -ENODATA;
if (!osc_sb_cppc2_support_acked) {
pr_debug("CPPC v2 _OSC not acked\n");
if (!cpc_supported_by_cpu())
return -ENODEV;
}
/* Parse the ACPI _CPC table for this CPU. */
status = acpi_evaluate_object_typed(handle, "_CPC", NULL, &output,
ACPI_TYPE_PACKAGE);
if (ACPI_FAILURE(status)) {
ret = -ENODEV;
goto out_buf_free;
}
out_obj = (union acpi_object *) output.pointer;
cpc_ptr = kzalloc(sizeof(struct cpc_desc), GFP_KERNEL);
if (!cpc_ptr) {
ret = -ENOMEM;
goto out_buf_free;
}
/* First entry is NumEntries. */
cpc_obj = &out_obj->package.elements[0];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
num_ent = cpc_obj->integer.value;
if (num_ent <= 1) {
pr_debug("Unexpected _CPC NumEntries value (%d) for CPU:%d\n",
num_ent, pr->id);
goto out_free;
}
} else {
pr_debug("Unexpected _CPC NumEntries entry type (%d) for CPU:%d\n",
cpc_obj->type, pr->id);
goto out_free;
}
/* Second entry should be revision. */
cpc_obj = &out_obj->package.elements[1];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
cpc_rev = cpc_obj->integer.value;
} else {
pr_debug("Unexpected _CPC Revision entry type (%d) for CPU:%d\n",
cpc_obj->type, pr->id);
goto out_free;
}
if (cpc_rev < CPPC_V2_REV) {
pr_debug("Unsupported _CPC Revision (%d) for CPU:%d\n", cpc_rev,
pr->id);
goto out_free;
}
/*
* Disregard _CPC if the number of entries in the return pachage is not
* as expected, but support future revisions being proper supersets of
* the v3 and only causing more entries to be returned by _CPC.
*/
if ((cpc_rev == CPPC_V2_REV && num_ent != CPPC_V2_NUM_ENT) ||
(cpc_rev == CPPC_V3_REV && num_ent != CPPC_V3_NUM_ENT) ||
(cpc_rev > CPPC_V3_REV && num_ent <= CPPC_V3_NUM_ENT)) {
pr_debug("Unexpected number of _CPC return package entries (%d) for CPU:%d\n",
num_ent, pr->id);
goto out_free;
}
if (cpc_rev > CPPC_V3_REV) {
num_ent = CPPC_V3_NUM_ENT;
cpc_rev = CPPC_V3_REV;
}
cpc_ptr->num_entries = num_ent;
cpc_ptr->version = cpc_rev;
/* Iterate through remaining entries in _CPC */
for (i = 2; i < num_ent; i++) {
cpc_obj = &out_obj->package.elements[i];
if (cpc_obj->type == ACPI_TYPE_INTEGER) {
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_INTEGER;
cpc_ptr->cpc_regs[i-2].cpc_entry.int_value = cpc_obj->integer.value;
} else if (cpc_obj->type == ACPI_TYPE_BUFFER) {
gas_t = (struct cpc_reg *)
cpc_obj->buffer.pointer;
/*
* The PCC Subspace index is encoded inside
* the CPC table entries. The same PCC index
* will be used for all the PCC entries,
* so extract it only once.
*/
if (gas_t->space_id == ACPI_ADR_SPACE_PLATFORM_COMM) {
if (pcc_subspace_id < 0) {
pcc_subspace_id = gas_t->access_width;
if (pcc_data_alloc(pcc_subspace_id))
goto out_free;
} else if (pcc_subspace_id != gas_t->access_width) {
pr_debug("Mismatched PCC ids in _CPC for CPU:%d\n",
pr->id);
goto out_free;
}
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
if (gas_t->address) {
void __iomem *addr;
size_t access_width;
if (!osc_cpc_flexible_adr_space_confirmed) {
pr_debug("Flexible address space capability not supported\n");
if (!cpc_supported_by_cpu())
goto out_free;
}
access_width = GET_BIT_WIDTH(gas_t) / 8;
addr = ioremap(gas_t->address, access_width);
if (!addr)
goto out_free;
cpc_ptr->cpc_regs[i-2].sys_mem_vaddr = addr;
}
} else if (gas_t->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
if (gas_t->access_width < 1 || gas_t->access_width > 3) {
/*
* 1 = 8-bit, 2 = 16-bit, and 3 = 32-bit.
* SystemIO doesn't implement 64-bit
* registers.
*/
pr_debug("Invalid access width %d for SystemIO register in _CPC\n",
gas_t->access_width);
goto out_free;
}
if (gas_t->address & OVER_16BTS_MASK) {
/* SystemIO registers use 16-bit integer addresses */
pr_debug("Invalid IO port %llu for SystemIO register in _CPC\n",
gas_t->address);
goto out_free;
}
if (!osc_cpc_flexible_adr_space_confirmed) {
pr_debug("Flexible address space capability not supported\n");
if (!cpc_supported_by_cpu())
goto out_free;
}
} else {
if (gas_t->space_id != ACPI_ADR_SPACE_FIXED_HARDWARE || !cpc_ffh_supported()) {
/* Support only PCC, SystemMemory, SystemIO, and FFH type regs. */
pr_debug("Unsupported register type (%d) in _CPC\n",
gas_t->space_id);
goto out_free;
}
}
cpc_ptr->cpc_regs[i-2].type = ACPI_TYPE_BUFFER;
memcpy(&cpc_ptr->cpc_regs[i-2].cpc_entry.reg, gas_t, sizeof(*gas_t));
} else {
pr_debug("Invalid entry type (%d) in _CPC for CPU:%d\n",
i, pr->id);
goto out_free;
}
}
per_cpu(cpu_pcc_subspace_idx, pr->id) = pcc_subspace_id;
/*
* Initialize the remaining cpc_regs as unsupported.
* Example: In case FW exposes CPPC v2, the below loop will initialize
* LOWEST_FREQ and NOMINAL_FREQ regs as unsupported
*/
for (i = num_ent - 2; i < MAX_CPC_REG_ENT; i++) {
cpc_ptr->cpc_regs[i].type = ACPI_TYPE_INTEGER;
cpc_ptr->cpc_regs[i].cpc_entry.int_value = 0;
}
/* Store CPU Logical ID */
cpc_ptr->cpu_id = pr->id;
/* Parse PSD data for this CPU */
ret = acpi_get_psd(cpc_ptr, handle);
if (ret)
goto out_free;
/* Register PCC channel once for all PCC subspace ID. */
if (pcc_subspace_id >= 0 && !pcc_data[pcc_subspace_id]->pcc_channel_acquired) {
ret = register_pcc_channel(pcc_subspace_id);
if (ret)
goto out_free;
init_rwsem(&pcc_data[pcc_subspace_id]->pcc_lock);
init_waitqueue_head(&pcc_data[pcc_subspace_id]->pcc_write_wait_q);
}
/* Everything looks okay */
pr_debug("Parsed CPC struct for CPU: %d\n", pr->id);
/* Add per logical CPU nodes for reading its feedback counters. */
cpu_dev = get_cpu_device(pr->id);
if (!cpu_dev) {
ret = -EINVAL;
goto out_free;
}
/* Plug PSD data into this CPU's CPC descriptor. */
per_cpu(cpc_desc_ptr, pr->id) = cpc_ptr;
ret = kobject_init_and_add(&cpc_ptr->kobj, &cppc_ktype, &cpu_dev->kobj,
"acpi_cppc");
if (ret) {
per_cpu(cpc_desc_ptr, pr->id) = NULL;
kobject_put(&cpc_ptr->kobj);
goto out_free;
}
arch_init_invariance_cppc();
kfree(output.pointer);
return 0;
out_free:
/* Free all the mapped sys mem areas for this CPU */
for (i = 2; i < cpc_ptr->num_entries; i++) {
void __iomem *addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
if (addr)
iounmap(addr);
}
kfree(cpc_ptr);
out_buf_free:
kfree(output.pointer);
return ret;
}
EXPORT_SYMBOL_GPL(acpi_cppc_processor_probe);
/**
* acpi_cppc_processor_exit - Cleanup CPC structs.
* @pr: Ptr to acpi_processor containing this CPU's logical ID.
*
* Return: Void
*/
void acpi_cppc_processor_exit(struct acpi_processor *pr)
{
struct cpc_desc *cpc_ptr;
unsigned int i;
void __iomem *addr;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, pr->id);
if (pcc_ss_id >= 0 && pcc_data[pcc_ss_id]) {
if (pcc_data[pcc_ss_id]->pcc_channel_acquired) {
pcc_data[pcc_ss_id]->refcount--;
if (!pcc_data[pcc_ss_id]->refcount) {
pcc_mbox_free_channel(pcc_data[pcc_ss_id]->pcc_channel);
kfree(pcc_data[pcc_ss_id]);
pcc_data[pcc_ss_id] = NULL;
}
}
}
cpc_ptr = per_cpu(cpc_desc_ptr, pr->id);
if (!cpc_ptr)
return;
/* Free all the mapped sys mem areas for this CPU */
for (i = 2; i < cpc_ptr->num_entries; i++) {
addr = cpc_ptr->cpc_regs[i-2].sys_mem_vaddr;
if (addr)
iounmap(addr);
}
kobject_put(&cpc_ptr->kobj);
kfree(cpc_ptr);
}
EXPORT_SYMBOL_GPL(acpi_cppc_processor_exit);
/**
* cpc_read_ffh() - Read FFH register
* @cpunum: CPU number to read
* @reg: cppc register information
* @val: place holder for return value
*
* Read bit_width bits from a specified address and bit_offset
*
* Return: 0 for success and error code
*/
int __weak cpc_read_ffh(int cpunum, struct cpc_reg *reg, u64 *val)
{
return -ENOTSUPP;
}
/**
* cpc_write_ffh() - Write FFH register
* @cpunum: CPU number to write
* @reg: cppc register information
* @val: value to write
*
* Write value of bit_width bits to a specified address and bit_offset
*
* Return: 0 for success and error code
*/
int __weak cpc_write_ffh(int cpunum, struct cpc_reg *reg, u64 val)
{
return -ENOTSUPP;
}
/*
* Since cpc_read and cpc_write are called while holding pcc_lock, it should be
* as fast as possible. We have already mapped the PCC subspace during init, so
* we can directly write to it.
*/
static int cpc_read(int cpu, struct cpc_register_resource *reg_res, u64 *val)
{
void __iomem *vaddr = NULL;
int size;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_reg *reg = &reg_res->cpc_entry.reg;
if (reg_res->type == ACPI_TYPE_INTEGER) {
*val = reg_res->cpc_entry.int_value;
return 0;
}
*val = 0;
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
u32 width = GET_BIT_WIDTH(reg);
u32 val_u32;
acpi_status status;
status = acpi_os_read_port((acpi_io_address)reg->address,
&val_u32, width);
if (ACPI_FAILURE(status)) {
pr_debug("Error: Failed to read SystemIO port %llx\n",
reg->address);
return -EFAULT;
}
*val = val_u32;
return 0;
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
vaddr = reg_res->sys_mem_vaddr;
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
return cpc_read_ffh(cpu, reg, val);
else
return acpi_os_read_memory((acpi_physical_address)reg->address,
val, reg->bit_width);
size = GET_BIT_WIDTH(reg);
switch (size) {
case 8:
*val = readb_relaxed(vaddr);
break;
case 16:
*val = readw_relaxed(vaddr);
break;
case 32:
*val = readl_relaxed(vaddr);
break;
case 64:
*val = readq_relaxed(vaddr);
break;
default:
pr_debug("Error: Cannot read %u bit width from PCC for ss: %d\n",
reg->bit_width, pcc_ss_id);
return -EFAULT;
}
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
*val = MASK_VAL(reg, *val);
return 0;
}
static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
{
int ret_val = 0;
int size;
void __iomem *vaddr = NULL;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_reg *reg = &reg_res->cpc_entry.reg;
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
u32 width = GET_BIT_WIDTH(reg);
acpi_status status;
status = acpi_os_write_port((acpi_io_address)reg->address,
(u32)val, width);
if (ACPI_FAILURE(status)) {
pr_debug("Error: Failed to write SystemIO port %llx\n",
reg->address);
return -EFAULT;
}
return 0;
} else if (reg->space_id == ACPI_ADR_SPACE_PLATFORM_COMM && pcc_ss_id >= 0)
vaddr = GET_PCC_VADDR(reg->address, pcc_ss_id);
else if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
vaddr = reg_res->sys_mem_vaddr;
else if (reg->space_id == ACPI_ADR_SPACE_FIXED_HARDWARE)
return cpc_write_ffh(cpu, reg, val);
else
return acpi_os_write_memory((acpi_physical_address)reg->address,
val, reg->bit_width);
size = GET_BIT_WIDTH(reg);
if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
val = MASK_VAL(reg, val);
switch (size) {
case 8:
writeb_relaxed(val, vaddr);
break;
case 16:
writew_relaxed(val, vaddr);
break;
case 32:
writel_relaxed(val, vaddr);
break;
case 64:
writeq_relaxed(val, vaddr);
break;
default:
pr_debug("Error: Cannot write %u bit width to PCC for ss: %d\n",
reg->bit_width, pcc_ss_id);
ret_val = -EFAULT;
break;
}
return ret_val;
}
static int cppc_get_perf(int cpunum, enum cppc_regs reg_idx, u64 *perf)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *reg;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
reg = &cpc_desc->cpc_regs[reg_idx];
if (CPC_IN_PCC(reg)) {
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = 0;
if (pcc_ss_id < 0)
return -EIO;
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0)
cpc_read(cpunum, reg, perf);
else
ret = -EIO;
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
cpc_read(cpunum, reg, perf);
return 0;
}
/**
* cppc_get_desired_perf - Get the desired performance register value.
* @cpunum: CPU from which to get desired performance.
* @desired_perf: Return address.
*
* Return: 0 for success, -EIO otherwise.
*/
int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
{
return cppc_get_perf(cpunum, DESIRED_PERF, desired_perf);
}
EXPORT_SYMBOL_GPL(cppc_get_desired_perf);
/**
* cppc_get_nominal_perf - Get the nominal performance register value.
* @cpunum: CPU from which to get nominal performance.
* @nominal_perf: Return address.
*
* Return: 0 for success, -EIO otherwise.
*/
int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
{
return cppc_get_perf(cpunum, NOMINAL_PERF, nominal_perf);
}
/**
* cppc_get_highest_perf - Get the highest performance register value.
* @cpunum: CPU from which to get highest performance.
* @highest_perf: Return address.
*
* Return: 0 for success, -EIO otherwise.
*/
int cppc_get_highest_perf(int cpunum, u64 *highest_perf)
{
return cppc_get_perf(cpunum, HIGHEST_PERF, highest_perf);
}
EXPORT_SYMBOL_GPL(cppc_get_highest_perf);
/**
* cppc_get_epp_perf - Get the epp register value.
* @cpunum: CPU from which to get epp preference value.
* @epp_perf: Return address.
*
* Return: 0 for success, -EIO otherwise.
*/
int cppc_get_epp_perf(int cpunum, u64 *epp_perf)
{
return cppc_get_perf(cpunum, ENERGY_PERF, epp_perf);
}
EXPORT_SYMBOL_GPL(cppc_get_epp_perf);
/**
* cppc_get_perf_caps - Get a CPU's performance capabilities.
* @cpunum: CPU from which to get capabilities info.
* @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h
*
* Return: 0 for success with perf_caps populated else -ERRNO.
*/
int cppc_get_perf_caps(int cpunum, struct cppc_perf_caps *perf_caps)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *highest_reg, *lowest_reg,
*lowest_non_linear_reg, *nominal_reg, *guaranteed_reg,
*low_freq_reg = NULL, *nom_freq_reg = NULL;
u64 high, low, guaranteed, nom, min_nonlinear, low_f = 0, nom_f = 0;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = 0, regs_in_pcc = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
highest_reg = &cpc_desc->cpc_regs[HIGHEST_PERF];
lowest_reg = &cpc_desc->cpc_regs[LOWEST_PERF];
lowest_non_linear_reg = &cpc_desc->cpc_regs[LOW_NON_LINEAR_PERF];
nominal_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
low_freq_reg = &cpc_desc->cpc_regs[LOWEST_FREQ];
nom_freq_reg = &cpc_desc->cpc_regs[NOMINAL_FREQ];
guaranteed_reg = &cpc_desc->cpc_regs[GUARANTEED_PERF];
/* Are any of the regs PCC ?*/
if (CPC_IN_PCC(highest_reg) || CPC_IN_PCC(lowest_reg) ||
CPC_IN_PCC(lowest_non_linear_reg) || CPC_IN_PCC(nominal_reg) ||
CPC_IN_PCC(low_freq_reg) || CPC_IN_PCC(nom_freq_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id\n");
return -ENODEV;
}
pcc_ss_data = pcc_data[pcc_ss_id];
regs_in_pcc = 1;
down_write(&pcc_ss_data->pcc_lock);
/* Ring doorbell once to update PCC subspace */
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
ret = -EIO;
goto out_err;
}
}
cpc_read(cpunum, highest_reg, &high);
perf_caps->highest_perf = high;
cpc_read(cpunum, lowest_reg, &low);
perf_caps->lowest_perf = low;
cpc_read(cpunum, nominal_reg, &nom);
perf_caps->nominal_perf = nom;
if (guaranteed_reg->type != ACPI_TYPE_BUFFER ||
IS_NULL_REG(&guaranteed_reg->cpc_entry.reg)) {
perf_caps->guaranteed_perf = 0;
} else {
cpc_read(cpunum, guaranteed_reg, &guaranteed);
perf_caps->guaranteed_perf = guaranteed;
}
cpc_read(cpunum, lowest_non_linear_reg, &min_nonlinear);
perf_caps->lowest_nonlinear_perf = min_nonlinear;
if (!high || !low || !nom || !min_nonlinear)
ret = -EFAULT;
/* Read optional lowest and nominal frequencies if present */
if (CPC_SUPPORTED(low_freq_reg))
cpc_read(cpunum, low_freq_reg, &low_f);
if (CPC_SUPPORTED(nom_freq_reg))
cpc_read(cpunum, nom_freq_reg, &nom_f);
perf_caps->lowest_freq = low_f;
perf_caps->nominal_freq = nom_f;
out_err:
if (regs_in_pcc)
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_caps);
/**
* cppc_perf_ctrs_in_pcc - Check if any perf counters are in a PCC region.
*
* CPPC has flexibility about how CPU performance counters are accessed.
* One of the choices is PCC regions, which can have a high access latency. This
* routine allows callers of cppc_get_perf_ctrs() to know this ahead of time.
*
* Return: true if any of the counters are in PCC regions, false otherwise
*/
bool cppc_perf_ctrs_in_pcc(void)
{
int cpu;
for_each_present_cpu(cpu) {
struct cpc_register_resource *ref_perf_reg;
struct cpc_desc *cpc_desc;
cpc_desc = per_cpu(cpc_desc_ptr, cpu);
if (CPC_IN_PCC(&cpc_desc->cpc_regs[DELIVERED_CTR]) ||
CPC_IN_PCC(&cpc_desc->cpc_regs[REFERENCE_CTR]) ||
CPC_IN_PCC(&cpc_desc->cpc_regs[CTR_WRAP_TIME]))
return true;
ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
/*
* If reference perf register is not supported then we should
* use the nominal perf value
*/
if (!CPC_SUPPORTED(ref_perf_reg))
ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
if (CPC_IN_PCC(ref_perf_reg))
return true;
}
return false;
}
EXPORT_SYMBOL_GPL(cppc_perf_ctrs_in_pcc);
/**
* cppc_get_perf_ctrs - Read a CPU's performance feedback counters.
* @cpunum: CPU from which to read counters.
* @perf_fb_ctrs: ptr to cppc_perf_fb_ctrs. See cppc_acpi.h
*
* Return: 0 for success with perf_fb_ctrs populated else -ERRNO.
*/
int cppc_get_perf_ctrs(int cpunum, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *delivered_reg, *reference_reg,
*ref_perf_reg, *ctr_wrap_reg;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
struct cppc_pcc_data *pcc_ss_data = NULL;
u64 delivered, reference, ref_perf, ctr_wrap_time;
int ret = 0, regs_in_pcc = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
delivered_reg = &cpc_desc->cpc_regs[DELIVERED_CTR];
reference_reg = &cpc_desc->cpc_regs[REFERENCE_CTR];
ref_perf_reg = &cpc_desc->cpc_regs[REFERENCE_PERF];
ctr_wrap_reg = &cpc_desc->cpc_regs[CTR_WRAP_TIME];
/*
* If reference perf register is not supported then we should
* use the nominal perf value
*/
if (!CPC_SUPPORTED(ref_perf_reg))
ref_perf_reg = &cpc_desc->cpc_regs[NOMINAL_PERF];
/* Are any of the regs PCC ?*/
if (CPC_IN_PCC(delivered_reg) || CPC_IN_PCC(reference_reg) ||
CPC_IN_PCC(ctr_wrap_reg) || CPC_IN_PCC(ref_perf_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id\n");
return -ENODEV;
}
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
regs_in_pcc = 1;
/* Ring doorbell once to update PCC subspace */
if (send_pcc_cmd(pcc_ss_id, CMD_READ) < 0) {
ret = -EIO;
goto out_err;
}
}
cpc_read(cpunum, delivered_reg, &delivered);
cpc_read(cpunum, reference_reg, &reference);
cpc_read(cpunum, ref_perf_reg, &ref_perf);
/*
* Per spec, if ctr_wrap_time optional register is unsupported, then the
* performance counters are assumed to never wrap during the lifetime of
* platform
*/
ctr_wrap_time = (u64)(~((u64)0));
if (CPC_SUPPORTED(ctr_wrap_reg))
cpc_read(cpunum, ctr_wrap_reg, &ctr_wrap_time);
if (!delivered || !reference || !ref_perf) {
ret = -EFAULT;
goto out_err;
}
perf_fb_ctrs->delivered = delivered;
perf_fb_ctrs->reference = reference;
perf_fb_ctrs->reference_perf = ref_perf;
perf_fb_ctrs->wraparound_time = ctr_wrap_time;
out_err:
if (regs_in_pcc)
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
EXPORT_SYMBOL_GPL(cppc_get_perf_ctrs);
/*
* Set Energy Performance Preference Register value through
* Performance Controls Interface
*/
int cppc_set_epp_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls, bool enable)
{
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_register_resource *epp_set_reg;
struct cpc_register_resource *auto_sel_reg;
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
return -ENODEV;
}
auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
epp_set_reg = &cpc_desc->cpc_regs[ENERGY_PERF];
if (CPC_IN_PCC(epp_set_reg) || CPC_IN_PCC(auto_sel_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id for CPU:%d\n", cpu);
return -ENODEV;
}
if (CPC_SUPPORTED(auto_sel_reg)) {
ret = cpc_write(cpu, auto_sel_reg, enable);
if (ret)
return ret;
}
if (CPC_SUPPORTED(epp_set_reg)) {
ret = cpc_write(cpu, epp_set_reg, perf_ctrls->energy_perf);
if (ret)
return ret;
}
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
/* after writing CPC, transfer the ownership of PCC to platform */
ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
up_write(&pcc_ss_data->pcc_lock);
} else {
ret = -ENOTSUPP;
pr_debug("_CPC in PCC is not supported\n");
}
return ret;
}
EXPORT_SYMBOL_GPL(cppc_set_epp_perf);
/**
* cppc_get_auto_sel_caps - Read autonomous selection register.
* @cpunum : CPU from which to read register.
* @perf_caps : struct where autonomous selection register value is updated.
*/
int cppc_get_auto_sel_caps(int cpunum, struct cppc_perf_caps *perf_caps)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
struct cpc_register_resource *auto_sel_reg;
u64 auto_sel;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpunum);
return -ENODEV;
}
auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
if (!CPC_SUPPORTED(auto_sel_reg))
pr_warn_once("Autonomous mode is not unsupported!\n");
if (CPC_IN_PCC(auto_sel_reg)) {
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = 0;
if (pcc_ss_id < 0)
return -ENODEV;
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0) {
cpc_read(cpunum, auto_sel_reg, &auto_sel);
perf_caps->auto_sel = (bool)auto_sel;
} else {
ret = -EIO;
}
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
return 0;
}
EXPORT_SYMBOL_GPL(cppc_get_auto_sel_caps);
/**
* cppc_set_auto_sel - Write autonomous selection register.
* @cpu : CPU to which to write register.
* @enable : the desired value of autonomous selection resiter to be updated.
*/
int cppc_set_auto_sel(int cpu, bool enable)
{
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_register_resource *auto_sel_reg;
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = -EINVAL;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
return -ENODEV;
}
auto_sel_reg = &cpc_desc->cpc_regs[AUTO_SEL_ENABLE];
if (CPC_IN_PCC(auto_sel_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id\n");
return -ENODEV;
}
if (CPC_SUPPORTED(auto_sel_reg)) {
ret = cpc_write(cpu, auto_sel_reg, enable);
if (ret)
return ret;
}
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
/* after writing CPC, transfer the ownership of PCC to platform */
ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
up_write(&pcc_ss_data->pcc_lock);
} else {
ret = -ENOTSUPP;
pr_debug("_CPC in PCC is not supported\n");
}
return ret;
}
EXPORT_SYMBOL_GPL(cppc_set_auto_sel);
/**
* cppc_set_enable - Set to enable CPPC on the processor by writing the
* Continuous Performance Control package EnableRegister field.
* @cpu: CPU for which to enable CPPC register.
* @enable: 0 - disable, 1 - enable CPPC feature on the processor.
*
* Return: 0 for success, -ERRNO or -EIO otherwise.
*/
int cppc_set_enable(int cpu, bool enable)
{
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cpc_register_resource *enable_reg;
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = -EINVAL;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
return -EINVAL;
}
enable_reg = &cpc_desc->cpc_regs[ENABLE];
if (CPC_IN_PCC(enable_reg)) {
if (pcc_ss_id < 0)
return -EIO;
ret = cpc_write(cpu, enable_reg, enable);
if (ret)
return ret;
pcc_ss_data = pcc_data[pcc_ss_id];
down_write(&pcc_ss_data->pcc_lock);
/* after writing CPC, transfer the ownership of PCC to platfrom */
ret = send_pcc_cmd(pcc_ss_id, CMD_WRITE);
up_write(&pcc_ss_data->pcc_lock);
return ret;
}
return cpc_write(cpu, enable_reg, enable);
}
EXPORT_SYMBOL_GPL(cppc_set_enable);
/**
* cppc_set_perf - Set a CPU's performance controls.
* @cpu: CPU for which to set performance controls.
* @perf_ctrls: ptr to cppc_perf_ctrls. See cppc_acpi.h
*
* Return: 0 for success, -ERRNO otherwise.
*/
int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls)
{
struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpu);
struct cpc_register_resource *desired_reg, *min_perf_reg, *max_perf_reg;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu);
struct cppc_pcc_data *pcc_ss_data = NULL;
int ret = 0;
if (!cpc_desc) {
pr_debug("No CPC descriptor for CPU:%d\n", cpu);
return -ENODEV;
}
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
min_perf_reg = &cpc_desc->cpc_regs[MIN_PERF];
max_perf_reg = &cpc_desc->cpc_regs[MAX_PERF];
/*
* This is Phase-I where we want to write to CPC registers
* -> We want all CPUs to be able to execute this phase in parallel
*
* Since read_lock can be acquired by multiple CPUs simultaneously we
* achieve that goal here
*/
if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) {
if (pcc_ss_id < 0) {
pr_debug("Invalid pcc_ss_id\n");
return -ENODEV;
}
pcc_ss_data = pcc_data[pcc_ss_id];
down_read(&pcc_ss_data->pcc_lock); /* BEGIN Phase-I */
if (pcc_ss_data->platform_owns_pcc) {
ret = check_pcc_chan(pcc_ss_id, false);
if (ret) {
up_read(&pcc_ss_data->pcc_lock);
return ret;
}
}
/*
* Update the pending_write to make sure a PCC CMD_READ will not
* arrive and steal the channel during the switch to write lock
*/
pcc_ss_data->pending_pcc_write_cmd = true;
cpc_desc->write_cmd_id = pcc_ss_data->pcc_write_cnt;
cpc_desc->write_cmd_status = 0;
}
cpc_write(cpu, desired_reg, perf_ctrls->desired_perf);
/*
* Only write if min_perf and max_perf not zero. Some drivers pass zero
* value to min and max perf, but they don't mean to set the zero value,
* they just don't want to write to those registers.
*/
if (perf_ctrls->min_perf)
cpc_write(cpu, min_perf_reg, perf_ctrls->min_perf);
if (perf_ctrls->max_perf)
cpc_write(cpu, max_perf_reg, perf_ctrls->max_perf);
if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg))
up_read(&pcc_ss_data->pcc_lock); /* END Phase-I */
/*
* This is Phase-II where we transfer the ownership of PCC to Platform
*
* Short Summary: Basically if we think of a group of cppc_set_perf
* requests that happened in short overlapping interval. The last CPU to
* come out of Phase-I will enter Phase-II and ring the doorbell.
*
* We have the following requirements for Phase-II:
* 1. We want to execute Phase-II only when there are no CPUs
* currently executing in Phase-I
* 2. Once we start Phase-II we want to avoid all other CPUs from
* entering Phase-I.
* 3. We want only one CPU among all those who went through Phase-I
* to run phase-II
*
* If write_trylock fails to get the lock and doesn't transfer the
* PCC ownership to the platform, then one of the following will be TRUE
* 1. There is at-least one CPU in Phase-I which will later execute
* write_trylock, so the CPUs in Phase-I will be responsible for
* executing the Phase-II.
* 2. Some other CPU has beaten this CPU to successfully execute the
* write_trylock and has already acquired the write_lock. We know for a
* fact it (other CPU acquiring the write_lock) couldn't have happened
* before this CPU's Phase-I as we held the read_lock.
* 3. Some other CPU executing pcc CMD_READ has stolen the
* down_write, in which case, send_pcc_cmd will check for pending
* CMD_WRITE commands by checking the pending_pcc_write_cmd.
* So this CPU can be certain that its request will be delivered
* So in all cases, this CPU knows that its request will be delivered
* by another CPU and can return
*
* After getting the down_write we still need to check for
* pending_pcc_write_cmd to take care of the following scenario
* The thread running this code could be scheduled out between
* Phase-I and Phase-II. Before it is scheduled back on, another CPU
* could have delivered the request to Platform by triggering the
* doorbell and transferred the ownership of PCC to platform. So this
* avoids triggering an unnecessary doorbell and more importantly before
* triggering the doorbell it makes sure that the PCC channel ownership
* is still with OSPM.
* pending_pcc_write_cmd can also be cleared by a different CPU, if
* there was a pcc CMD_READ waiting on down_write and it steals the lock
* before the pcc CMD_WRITE is completed. send_pcc_cmd checks for this
* case during a CMD_READ and if there are pending writes it delivers
* the write command before servicing the read command
*/
if (CPC_IN_PCC(desired_reg) || CPC_IN_PCC(min_perf_reg) || CPC_IN_PCC(max_perf_reg)) {
if (down_write_trylock(&pcc_ss_data->pcc_lock)) {/* BEGIN Phase-II */
/* Update only if there are pending write commands */
if (pcc_ss_data->pending_pcc_write_cmd)
send_pcc_cmd(pcc_ss_id, CMD_WRITE);
up_write(&pcc_ss_data->pcc_lock); /* END Phase-II */
} else
/* Wait until pcc_write_cnt is updated by send_pcc_cmd */
wait_event(pcc_ss_data->pcc_write_wait_q,
cpc_desc->write_cmd_id != pcc_ss_data->pcc_write_cnt);
/* send_pcc_cmd updates the status in case of failure */
ret = cpc_desc->write_cmd_status;
}
return ret;
}
EXPORT_SYMBOL_GPL(cppc_set_perf);
/**
* cppc_get_transition_latency - returns frequency transition latency in ns
* @cpu_num: CPU number for per_cpu().
*
* ACPI CPPC does not explicitly specify how a platform can specify the
* transition latency for performance change requests. The closest we have
* is the timing information from the PCCT tables which provides the info
* on the number and frequency of PCC commands the platform can handle.
*
* If desired_reg is in the SystemMemory or SystemIo ACPI address space,
* then assume there is no latency.
*/
unsigned int cppc_get_transition_latency(int cpu_num)
{
/*
* Expected transition latency is based on the PCCT timing values
* Below are definition from ACPI spec:
* pcc_nominal- Expected latency to process a command, in microseconds
* pcc_mpar - The maximum number of periodic requests that the subspace
* channel can support, reported in commands per minute. 0
* indicates no limitation.
* pcc_mrtt - The minimum amount of time that OSPM must wait after the
* completion of a command before issuing the next command,
* in microseconds.
*/
unsigned int latency_ns = 0;
struct cpc_desc *cpc_desc;
struct cpc_register_resource *desired_reg;
int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpu_num);
struct cppc_pcc_data *pcc_ss_data;
cpc_desc = per_cpu(cpc_desc_ptr, cpu_num);
if (!cpc_desc)
return CPUFREQ_ETERNAL;
desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
if (CPC_IN_SYSTEM_MEMORY(desired_reg) || CPC_IN_SYSTEM_IO(desired_reg))
return 0;
else if (!CPC_IN_PCC(desired_reg))
return CPUFREQ_ETERNAL;
if (pcc_ss_id < 0)
return CPUFREQ_ETERNAL;
pcc_ss_data = pcc_data[pcc_ss_id];
if (pcc_ss_data->pcc_mpar)
latency_ns = 60 * (1000 * 1000 * 1000 / pcc_ss_data->pcc_mpar);
latency_ns = max(latency_ns, pcc_ss_data->pcc_nominal * 1000);
latency_ns = max(latency_ns, pcc_ss_data->pcc_mrtt * 1000);
return latency_ns;
}
EXPORT_SYMBOL_GPL(cppc_get_transition_latency);
/* Minimum struct length needed for the DMI processor entry we want */
#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48
/* Offset in the DMI processor structure for the max frequency */
#define DMI_PROCESSOR_MAX_SPEED 0x14
/* Callback function used to retrieve the max frequency from DMI */
static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
{
const u8 *dmi_data = (const u8 *)dm;
u16 *mhz = (u16 *)private;
if (dm->type == DMI_ENTRY_PROCESSOR &&
dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
u16 val = (u16)get_unaligned((const u16 *)
(dmi_data + DMI_PROCESSOR_MAX_SPEED));
*mhz = val > *mhz ? val : *mhz;
}
}
/* Look up the max frequency in DMI */
static u64 cppc_get_dmi_max_khz(void)
{
u16 mhz = 0;
dmi_walk(cppc_find_dmi_mhz, &mhz);
/*
* Real stupid fallback value, just in case there is no
* actual value set.
*/
mhz = mhz ? mhz : 1;
return KHZ_PER_MHZ * mhz;
}
/*
* If CPPC lowest_freq and nominal_freq registers are exposed then we can
* use them to convert perf to freq and vice versa. The conversion is
* extrapolated as an affine function passing by the 2 points:
* - (Low perf, Low freq)
* - (Nominal perf, Nominal freq)
*/
unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf)
{
s64 retval, offset = 0;
static u64 max_khz;
u64 mul, div;
if (caps->lowest_freq && caps->nominal_freq) {
mul = caps->nominal_freq - caps->lowest_freq;
mul *= KHZ_PER_MHZ;
div = caps->nominal_perf - caps->lowest_perf;
offset = caps->nominal_freq * KHZ_PER_MHZ -
div64_u64(caps->nominal_perf * mul, div);
} else {
if (!max_khz)
max_khz = cppc_get_dmi_max_khz();
mul = max_khz;
div = caps->highest_perf;
}
retval = offset + div64_u64(perf * mul, div);
if (retval >= 0)
return retval;
return 0;
}
EXPORT_SYMBOL_GPL(cppc_perf_to_khz);
unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq)
{
s64 retval, offset = 0;
static u64 max_khz;
u64 mul, div;
if (caps->lowest_freq && caps->nominal_freq) {
mul = caps->nominal_perf - caps->lowest_perf;
div = caps->nominal_freq - caps->lowest_freq;
/*
* We don't need to convert to kHz for computing offset and can
* directly use nominal_freq and lowest_freq as the div64_u64
* will remove the frequency unit.
*/
offset = caps->nominal_perf -
div64_u64(caps->nominal_freq * mul, div);
/* But we need it for computing the perf level. */
div *= KHZ_PER_MHZ;
} else {
if (!max_khz)
max_khz = cppc_get_dmi_max_khz();
mul = caps->highest_perf;
div = max_khz;
}
retval = offset + div64_u64(freq * mul, div);
if (retval >= 0)
return retval;
return 0;
}
EXPORT_SYMBOL_GPL(cppc_khz_to_perf);