mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 18:14:48 +08:00
2c810ccdba
Currently, the broadcast station is managed along with the interface type, rather than always being present. That leads to a bug with injection -- it is currently not possible to inject frames when the only virtual interface is a monitor, because in that the required broadcast station is missing. Additionally, allocating and deallocating the broadcast station's LQ all the time is wasteful, and the code to support this is fairly complex. So this changes completely the way we manage the broadcast station. Rather than manage it along with any interface, we now allocate it when we bring the device up, and remove it again when we bring the device down. When we bring the device up, we don't immediately program the broadcast station into it, instead we just mark it active and rely on the next restore cycle to upload it to the device. This works because an unassociated RXON is always required at least once to set up device parameters, which implies a reprogramming of stations into the device. As we now manage all stations properly, there no longer is a need for forcing a clearing of them via iwl_clear_ucode_stations(), which can become a lot simpler. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
670 lines
22 KiB
C
670 lines
22 KiB
C
/******************************************************************************
|
|
*
|
|
* Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of version 2 of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
|
|
*
|
|
* The full GNU General Public License is included in this distribution in the
|
|
* file called LICENSE.
|
|
*
|
|
* Contact Information:
|
|
* Intel Linux Wireless <ilw@linux.intel.com>
|
|
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
|
|
*
|
|
*****************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/wireless.h>
|
|
#include <net/mac80211.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "iwl-eeprom.h"
|
|
#include "iwl-dev.h"
|
|
#include "iwl-core.h"
|
|
#include "iwl-io.h"
|
|
#include "iwl-sta.h"
|
|
#include "iwl-agn.h"
|
|
#include "iwl-helpers.h"
|
|
#include "iwl-agn-hw.h"
|
|
#include "iwl-6000-hw.h"
|
|
#include "iwl-agn-led.h"
|
|
#include "iwl-agn-debugfs.h"
|
|
|
|
/* Highest firmware API version supported */
|
|
#define IWL6000_UCODE_API_MAX 4
|
|
#define IWL6050_UCODE_API_MAX 4
|
|
#define IWL6000G2_UCODE_API_MAX 4
|
|
|
|
/* Lowest firmware API version supported */
|
|
#define IWL6000_UCODE_API_MIN 4
|
|
#define IWL6050_UCODE_API_MIN 4
|
|
#define IWL6000G2_UCODE_API_MIN 4
|
|
|
|
#define IWL6000_FW_PRE "iwlwifi-6000-"
|
|
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
|
|
#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
|
|
|
|
#define IWL6050_FW_PRE "iwlwifi-6050-"
|
|
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
|
|
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
|
|
|
|
#define IWL6000G2A_FW_PRE "iwlwifi-6000g2a-"
|
|
#define _IWL6000G2A_MODULE_FIRMWARE(api) IWL6000G2A_FW_PRE #api ".ucode"
|
|
#define IWL6000G2A_MODULE_FIRMWARE(api) _IWL6000G2A_MODULE_FIRMWARE(api)
|
|
|
|
|
|
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
|
|
{
|
|
/* want Celsius */
|
|
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
|
|
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
|
|
}
|
|
|
|
/* Indicate calibration version to uCode. */
|
|
static void iwl6050_set_calib_version(struct iwl_priv *priv)
|
|
{
|
|
if (priv->cfg->ops->lib->eeprom_ops.calib_version(priv) >= 6)
|
|
iwl_set_bit(priv, CSR_GP_DRIVER_REG,
|
|
CSR_GP_DRIVER_REG_BIT_CALIB_VERSION6);
|
|
}
|
|
|
|
/* NIC configuration for 6000 series */
|
|
static void iwl6000_nic_config(struct iwl_priv *priv)
|
|
{
|
|
u16 radio_cfg;
|
|
|
|
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
|
|
|
|
/* write radio config values to register */
|
|
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
|
|
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
|
|
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
|
|
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
|
|
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
|
|
|
|
/* set CSR_HW_CONFIG_REG for uCode use */
|
|
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
|
|
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
|
|
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
|
|
|
|
/* no locking required for register write */
|
|
if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
|
|
/* 2x2 IPA phy type */
|
|
iwl_write32(priv, CSR_GP_DRIVER_REG,
|
|
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
|
|
}
|
|
/* else do nothing, uCode configured */
|
|
if (priv->cfg->ops->lib->temp_ops.set_calib_version)
|
|
priv->cfg->ops->lib->temp_ops.set_calib_version(priv);
|
|
}
|
|
|
|
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
|
|
.min_nrg_cck = 97,
|
|
.max_nrg_cck = 0, /* not used, set to 0 */
|
|
.auto_corr_min_ofdm = 80,
|
|
.auto_corr_min_ofdm_mrc = 128,
|
|
.auto_corr_min_ofdm_x1 = 105,
|
|
.auto_corr_min_ofdm_mrc_x1 = 192,
|
|
|
|
.auto_corr_max_ofdm = 145,
|
|
.auto_corr_max_ofdm_mrc = 232,
|
|
.auto_corr_max_ofdm_x1 = 110,
|
|
.auto_corr_max_ofdm_mrc_x1 = 232,
|
|
|
|
.auto_corr_min_cck = 125,
|
|
.auto_corr_max_cck = 175,
|
|
.auto_corr_min_cck_mrc = 160,
|
|
.auto_corr_max_cck_mrc = 310,
|
|
.nrg_th_cck = 97,
|
|
.nrg_th_ofdm = 100,
|
|
|
|
.barker_corr_th_min = 190,
|
|
.barker_corr_th_min_mrc = 390,
|
|
.nrg_th_cca = 62,
|
|
};
|
|
|
|
static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
|
|
{
|
|
if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
|
|
priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
|
|
priv->cfg->num_of_queues =
|
|
priv->cfg->mod_params->num_of_queues;
|
|
|
|
priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
|
|
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
|
|
priv->hw_params.scd_bc_tbls_size =
|
|
priv->cfg->num_of_queues *
|
|
sizeof(struct iwlagn_scd_bc_tbl);
|
|
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
|
|
priv->hw_params.max_stations = IWL5000_STATION_COUNT;
|
|
priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
|
|
|
|
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
|
|
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
|
|
|
|
priv->hw_params.max_bsm_size = 0;
|
|
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
|
|
BIT(IEEE80211_BAND_5GHZ);
|
|
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
|
|
|
|
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
|
|
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
|
|
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
|
|
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
|
|
|
|
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
|
|
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
|
|
|
|
/* Set initial sensitivity parameters */
|
|
/* Set initial calibration set */
|
|
priv->hw_params.sens = &iwl6000_sensitivity;
|
|
priv->hw_params.calib_init_cfg =
|
|
BIT(IWL_CALIB_XTAL) |
|
|
BIT(IWL_CALIB_LO) |
|
|
BIT(IWL_CALIB_TX_IQ) |
|
|
BIT(IWL_CALIB_BASE_BAND);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl6050_hw_set_hw_params(struct iwl_priv *priv)
|
|
{
|
|
if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
|
|
priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES)
|
|
priv->cfg->num_of_queues =
|
|
priv->cfg->mod_params->num_of_queues;
|
|
|
|
priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
|
|
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
|
|
priv->hw_params.scd_bc_tbls_size =
|
|
priv->cfg->num_of_queues *
|
|
sizeof(struct iwlagn_scd_bc_tbl);
|
|
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
|
|
priv->hw_params.max_stations = IWL5000_STATION_COUNT;
|
|
priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
|
|
|
|
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
|
|
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
|
|
|
|
priv->hw_params.max_bsm_size = 0;
|
|
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
|
|
BIT(IEEE80211_BAND_5GHZ);
|
|
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
|
|
|
|
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
|
|
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
|
|
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
|
|
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
|
|
|
|
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
|
|
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
|
|
|
|
/* Set initial sensitivity parameters */
|
|
/* Set initial calibration set */
|
|
priv->hw_params.sens = &iwl6000_sensitivity;
|
|
priv->hw_params.calib_init_cfg =
|
|
BIT(IWL_CALIB_XTAL) |
|
|
BIT(IWL_CALIB_DC) |
|
|
BIT(IWL_CALIB_LO) |
|
|
BIT(IWL_CALIB_TX_IQ) |
|
|
BIT(IWL_CALIB_BASE_BAND);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
|
|
{
|
|
struct iwl6000_channel_switch_cmd cmd;
|
|
const struct iwl_channel_info *ch_info;
|
|
struct iwl_host_cmd hcmd = {
|
|
.id = REPLY_CHANNEL_SWITCH,
|
|
.len = sizeof(cmd),
|
|
.flags = CMD_SIZE_HUGE,
|
|
.data = &cmd,
|
|
};
|
|
|
|
IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
|
|
priv->active_rxon.channel, channel);
|
|
|
|
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
|
|
cmd.channel = cpu_to_le16(channel);
|
|
cmd.rxon_flags = priv->staging_rxon.flags;
|
|
cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
|
|
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
|
|
ch_info = iwl_get_channel_info(priv, priv->band, channel);
|
|
if (ch_info)
|
|
cmd.expect_beacon = is_channel_radar(ch_info);
|
|
else {
|
|
IWL_ERR(priv, "invalid channel switch from %u to %u\n",
|
|
priv->active_rxon.channel, channel);
|
|
return -EFAULT;
|
|
}
|
|
priv->switch_rxon.channel = cpu_to_le16(channel);
|
|
priv->switch_rxon.switch_in_progress = true;
|
|
|
|
return iwl_send_cmd_sync(priv, &hcmd);
|
|
}
|
|
|
|
static struct iwl_lib_ops iwl6000_lib = {
|
|
.set_hw_params = iwl6000_hw_set_hw_params,
|
|
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
|
|
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
|
|
.txq_set_sched = iwlagn_txq_set_sched,
|
|
.txq_agg_enable = iwlagn_txq_agg_enable,
|
|
.txq_agg_disable = iwlagn_txq_agg_disable,
|
|
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
|
|
.txq_free_tfd = iwl_hw_txq_free_tfd,
|
|
.txq_init = iwl_hw_tx_queue_init,
|
|
.rx_handler_setup = iwlagn_rx_handler_setup,
|
|
.setup_deferred_work = iwlagn_setup_deferred_work,
|
|
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
|
|
.load_ucode = iwlagn_load_ucode,
|
|
.dump_nic_event_log = iwl_dump_nic_event_log,
|
|
.dump_nic_error_log = iwl_dump_nic_error_log,
|
|
.dump_csr = iwl_dump_csr,
|
|
.dump_fh = iwl_dump_fh,
|
|
.init_alive_start = iwlagn_init_alive_start,
|
|
.alive_notify = iwlagn_alive_notify,
|
|
.send_tx_power = iwlagn_send_tx_power,
|
|
.update_chain_flags = iwl_update_chain_flags,
|
|
.set_channel_switch = iwl6000_hw_channel_switch,
|
|
.apm_ops = {
|
|
.init = iwl_apm_init,
|
|
.stop = iwl_apm_stop,
|
|
.config = iwl6000_nic_config,
|
|
.set_pwr_src = iwl_set_pwr_src,
|
|
},
|
|
.eeprom_ops = {
|
|
.regulatory_bands = {
|
|
EEPROM_REG_BAND_1_CHANNELS,
|
|
EEPROM_REG_BAND_2_CHANNELS,
|
|
EEPROM_REG_BAND_3_CHANNELS,
|
|
EEPROM_REG_BAND_4_CHANNELS,
|
|
EEPROM_REG_BAND_5_CHANNELS,
|
|
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
|
|
EEPROM_REG_BAND_52_HT40_CHANNELS
|
|
},
|
|
.verify_signature = iwlcore_eeprom_verify_signature,
|
|
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
|
|
.release_semaphore = iwlcore_eeprom_release_semaphore,
|
|
.calib_version = iwlagn_eeprom_calib_version,
|
|
.query_addr = iwlagn_eeprom_query_addr,
|
|
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
|
|
},
|
|
.post_associate = iwl_post_associate,
|
|
.isr = iwl_isr_ict,
|
|
.config_ap = iwl_config_ap,
|
|
.temp_ops = {
|
|
.temperature = iwlagn_temperature,
|
|
.set_ct_kill = iwl6000_set_ct_threshold,
|
|
},
|
|
.manage_ibss_station = iwlagn_manage_ibss_station,
|
|
.debugfs_ops = {
|
|
.rx_stats_read = iwl_ucode_rx_stats_read,
|
|
.tx_stats_read = iwl_ucode_tx_stats_read,
|
|
.general_stats_read = iwl_ucode_general_stats_read,
|
|
},
|
|
.recover_from_tx_stall = iwl_bg_monitor_recover,
|
|
.check_plcp_health = iwl_good_plcp_health,
|
|
.check_ack_health = iwl_good_ack_health,
|
|
};
|
|
|
|
static const struct iwl_ops iwl6000_ops = {
|
|
.lib = &iwl6000_lib,
|
|
.hcmd = &iwlagn_hcmd,
|
|
.utils = &iwlagn_hcmd_utils,
|
|
.led = &iwlagn_led_ops,
|
|
};
|
|
|
|
static struct iwl_lib_ops iwl6050_lib = {
|
|
.set_hw_params = iwl6050_hw_set_hw_params,
|
|
.txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl,
|
|
.txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl,
|
|
.txq_set_sched = iwlagn_txq_set_sched,
|
|
.txq_agg_enable = iwlagn_txq_agg_enable,
|
|
.txq_agg_disable = iwlagn_txq_agg_disable,
|
|
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
|
|
.txq_free_tfd = iwl_hw_txq_free_tfd,
|
|
.txq_init = iwl_hw_tx_queue_init,
|
|
.rx_handler_setup = iwlagn_rx_handler_setup,
|
|
.setup_deferred_work = iwlagn_setup_deferred_work,
|
|
.is_valid_rtc_data_addr = iwlagn_hw_valid_rtc_data_addr,
|
|
.load_ucode = iwlagn_load_ucode,
|
|
.dump_nic_event_log = iwl_dump_nic_event_log,
|
|
.dump_nic_error_log = iwl_dump_nic_error_log,
|
|
.dump_csr = iwl_dump_csr,
|
|
.dump_fh = iwl_dump_fh,
|
|
.init_alive_start = iwlagn_init_alive_start,
|
|
.alive_notify = iwlagn_alive_notify,
|
|
.send_tx_power = iwlagn_send_tx_power,
|
|
.update_chain_flags = iwl_update_chain_flags,
|
|
.set_channel_switch = iwl6000_hw_channel_switch,
|
|
.apm_ops = {
|
|
.init = iwl_apm_init,
|
|
.stop = iwl_apm_stop,
|
|
.config = iwl6000_nic_config,
|
|
.set_pwr_src = iwl_set_pwr_src,
|
|
},
|
|
.eeprom_ops = {
|
|
.regulatory_bands = {
|
|
EEPROM_REG_BAND_1_CHANNELS,
|
|
EEPROM_REG_BAND_2_CHANNELS,
|
|
EEPROM_REG_BAND_3_CHANNELS,
|
|
EEPROM_REG_BAND_4_CHANNELS,
|
|
EEPROM_REG_BAND_5_CHANNELS,
|
|
EEPROM_6000_REG_BAND_24_HT40_CHANNELS,
|
|
EEPROM_REG_BAND_52_HT40_CHANNELS
|
|
},
|
|
.verify_signature = iwlcore_eeprom_verify_signature,
|
|
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
|
|
.release_semaphore = iwlcore_eeprom_release_semaphore,
|
|
.calib_version = iwlagn_eeprom_calib_version,
|
|
.query_addr = iwlagn_eeprom_query_addr,
|
|
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
|
|
},
|
|
.post_associate = iwl_post_associate,
|
|
.isr = iwl_isr_ict,
|
|
.config_ap = iwl_config_ap,
|
|
.temp_ops = {
|
|
.temperature = iwlagn_temperature,
|
|
.set_ct_kill = iwl6000_set_ct_threshold,
|
|
.set_calib_version = iwl6050_set_calib_version,
|
|
},
|
|
.manage_ibss_station = iwlagn_manage_ibss_station,
|
|
.debugfs_ops = {
|
|
.rx_stats_read = iwl_ucode_rx_stats_read,
|
|
.tx_stats_read = iwl_ucode_tx_stats_read,
|
|
.general_stats_read = iwl_ucode_general_stats_read,
|
|
},
|
|
.recover_from_tx_stall = iwl_bg_monitor_recover,
|
|
.check_plcp_health = iwl_good_plcp_health,
|
|
.check_ack_health = iwl_good_ack_health,
|
|
};
|
|
|
|
static const struct iwl_ops iwl6050_ops = {
|
|
.lib = &iwl6050_lib,
|
|
.hcmd = &iwlagn_hcmd,
|
|
.utils = &iwlagn_hcmd_utils,
|
|
.led = &iwlagn_led_ops,
|
|
};
|
|
|
|
|
|
struct iwl_cfg iwl6000g2a_2agn_cfg = {
|
|
.name = "6000 Series 2x2 AGN Gen2a",
|
|
.fw_name_pre = IWL6000G2A_FW_PRE,
|
|
.ucode_api_max = IWL6000G2_UCODE_API_MAX,
|
|
.ucode_api_min = IWL6000G2_UCODE_API_MIN,
|
|
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
|
|
.ops = &iwl6000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_6000G2_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_6000G2_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_AB,
|
|
.valid_rx_ant = ANT_AB,
|
|
.pll_cfg_val = 0,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.pa_type = IWL_PA_SYSTEM,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
|
|
.shadow_ram_support = true,
|
|
.ht_greenfield_support = true,
|
|
.led_compensation = 51,
|
|
.use_rts_for_ht = true, /* use rts/cts protection */
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.supports_idle = true,
|
|
.adv_thermal_throttle = true,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1000,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 512,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
/*
|
|
* "i": Internal configuration, use internal Power Amplifier
|
|
*/
|
|
struct iwl_cfg iwl6000i_2agn_cfg = {
|
|
.name = "Intel(R) Centrino(R) Advanced-N 6200 AGN",
|
|
.fw_name_pre = IWL6000_FW_PRE,
|
|
.ucode_api_max = IWL6000_UCODE_API_MAX,
|
|
.ucode_api_min = IWL6000_UCODE_API_MIN,
|
|
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
|
|
.ops = &iwl6000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_BC,
|
|
.valid_rx_ant = ANT_BC,
|
|
.pll_cfg_val = 0,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.pa_type = IWL_PA_INTERNAL,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
|
|
.shadow_ram_support = true,
|
|
.ht_greenfield_support = true,
|
|
.led_compensation = 51,
|
|
.use_rts_for_ht = true, /* use rts/cts protection */
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.supports_idle = true,
|
|
.adv_thermal_throttle = true,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1000,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 1024,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
struct iwl_cfg iwl6000i_2abg_cfg = {
|
|
.name = "Intel(R) Centrino(R) Advanced-N 6200 ABG",
|
|
.fw_name_pre = IWL6000_FW_PRE,
|
|
.ucode_api_max = IWL6000_UCODE_API_MAX,
|
|
.ucode_api_min = IWL6000_UCODE_API_MIN,
|
|
.sku = IWL_SKU_A|IWL_SKU_G,
|
|
.ops = &iwl6000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_BC,
|
|
.valid_rx_ant = ANT_BC,
|
|
.pll_cfg_val = 0,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.pa_type = IWL_PA_INTERNAL,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
|
|
.shadow_ram_support = true,
|
|
.led_compensation = 51,
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.supports_idle = true,
|
|
.adv_thermal_throttle = true,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1000,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 1024,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
struct iwl_cfg iwl6000i_2bg_cfg = {
|
|
.name = "Intel(R) Centrino(R) Advanced-N 6200 BG",
|
|
.fw_name_pre = IWL6000_FW_PRE,
|
|
.ucode_api_max = IWL6000_UCODE_API_MAX,
|
|
.ucode_api_min = IWL6000_UCODE_API_MIN,
|
|
.sku = IWL_SKU_G,
|
|
.ops = &iwl6000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_BC,
|
|
.valid_rx_ant = ANT_BC,
|
|
.pll_cfg_val = 0,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.pa_type = IWL_PA_INTERNAL,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
|
|
.shadow_ram_support = true,
|
|
.led_compensation = 51,
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.supports_idle = true,
|
|
.adv_thermal_throttle = true,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1000,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 1024,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
struct iwl_cfg iwl6050_2agn_cfg = {
|
|
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 AGN",
|
|
.fw_name_pre = IWL6050_FW_PRE,
|
|
.ucode_api_max = IWL6050_UCODE_API_MAX,
|
|
.ucode_api_min = IWL6050_UCODE_API_MIN,
|
|
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
|
|
.ops = &iwl6050_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_AB,
|
|
.valid_rx_ant = ANT_AB,
|
|
.pll_cfg_val = 0,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.pa_type = IWL_PA_SYSTEM,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
|
|
.shadow_ram_support = true,
|
|
.ht_greenfield_support = true,
|
|
.led_compensation = 51,
|
|
.use_rts_for_ht = true, /* use rts/cts protection */
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.supports_idle = true,
|
|
.adv_thermal_throttle = true,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1500,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 1024,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
struct iwl_cfg iwl6050_2abg_cfg = {
|
|
.name = "Intel(R) Centrino(R) Advanced-N + WiMAX 6250 ABG",
|
|
.fw_name_pre = IWL6050_FW_PRE,
|
|
.ucode_api_max = IWL6050_UCODE_API_MAX,
|
|
.ucode_api_min = IWL6050_UCODE_API_MIN,
|
|
.sku = IWL_SKU_A|IWL_SKU_G,
|
|
.ops = &iwl6050_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_6050_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_AB,
|
|
.valid_rx_ant = ANT_AB,
|
|
.pll_cfg_val = 0,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.pa_type = IWL_PA_SYSTEM,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
|
|
.shadow_ram_support = true,
|
|
.led_compensation = 51,
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.supports_idle = true,
|
|
.adv_thermal_throttle = true,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1500,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 1024,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
struct iwl_cfg iwl6000_3agn_cfg = {
|
|
.name = "Intel(R) Centrino(R) Ultimate-N 6300 AGN",
|
|
.fw_name_pre = IWL6000_FW_PRE,
|
|
.ucode_api_max = IWL6000_UCODE_API_MAX,
|
|
.ucode_api_min = IWL6000_UCODE_API_MIN,
|
|
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
|
|
.ops = &iwl6000_ops,
|
|
.eeprom_size = OTP_LOW_IMAGE_SIZE,
|
|
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
|
|
.eeprom_calib_ver = EEPROM_6000_TX_POWER_VERSION,
|
|
.num_of_queues = IWLAGN_NUM_QUEUES,
|
|
.num_of_ampdu_queues = IWLAGN_NUM_AMPDU_QUEUES,
|
|
.mod_params = &iwlagn_mod_params,
|
|
.valid_tx_ant = ANT_ABC,
|
|
.valid_rx_ant = ANT_ABC,
|
|
.pll_cfg_val = 0,
|
|
.set_l0s = true,
|
|
.use_bsm = false,
|
|
.pa_type = IWL_PA_SYSTEM,
|
|
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
|
|
.shadow_ram_support = true,
|
|
.ht_greenfield_support = true,
|
|
.led_compensation = 51,
|
|
.use_rts_for_ht = true, /* use rts/cts protection */
|
|
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
|
|
.supports_idle = true,
|
|
.adv_thermal_throttle = true,
|
|
.support_ct_kill_exit = true,
|
|
.plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF,
|
|
.chain_noise_scale = 1000,
|
|
.monitor_recover_period = IWL_MONITORING_PERIOD,
|
|
.max_event_log_size = 1024,
|
|
.ucode_tracing = true,
|
|
.sensitivity_calib_by_driver = true,
|
|
.chain_noise_calib_by_driver = true,
|
|
};
|
|
|
|
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
|
|
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));
|
|
MODULE_FIRMWARE(IWL6000G2A_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX));
|