mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-25 20:14:25 +08:00
109eee2f2a
This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
211 lines
6.0 KiB
C
211 lines
6.0 KiB
C
/*
|
|
* Copyright 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* Freescale DCU drm device driver
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_atomic.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/drm_crtc.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
|
|
#include "fsl_dcu_drm_crtc.h"
|
|
#include "fsl_dcu_drm_drv.h"
|
|
#include "fsl_dcu_drm_plane.h"
|
|
|
|
static void fsl_dcu_drm_crtc_atomic_begin(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
}
|
|
|
|
static int fsl_dcu_drm_crtc_atomic_check(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *state)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc,
|
|
struct drm_crtc_state *old_crtc_state)
|
|
{
|
|
}
|
|
|
|
static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
|
|
DCU_MODE_DCU_MODE_MASK,
|
|
DCU_MODE_DCU_MODE(DCU_MODE_OFF));
|
|
if (ret)
|
|
dev_err(fsl_dev->dev, "Disable CRTC failed\n");
|
|
ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
|
|
DCU_UPDATE_MODE_READREG);
|
|
if (ret)
|
|
dev_err(fsl_dev->dev, "Enable CRTC failed\n");
|
|
}
|
|
|
|
static void fsl_dcu_drm_crtc_enable(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
|
|
int ret;
|
|
|
|
ret = regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
|
|
DCU_MODE_DCU_MODE_MASK,
|
|
DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
|
|
if (ret)
|
|
dev_err(fsl_dev->dev, "Enable CRTC failed\n");
|
|
ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
|
|
DCU_UPDATE_MODE_READREG);
|
|
if (ret)
|
|
dev_err(fsl_dev->dev, "Enable CRTC failed\n");
|
|
}
|
|
|
|
static bool fsl_dcu_drm_crtc_mode_fixup(struct drm_crtc *crtc,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
return true;
|
|
}
|
|
|
|
static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->dev;
|
|
struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
|
|
struct drm_display_mode *mode = &crtc->state->mode;
|
|
unsigned int hbp, hfp, hsw, vbp, vfp, vsw, div, index;
|
|
unsigned long dcuclk;
|
|
int ret;
|
|
|
|
index = drm_crtc_index(crtc);
|
|
dcuclk = clk_get_rate(fsl_dev->clk);
|
|
div = dcuclk / mode->clock / 1000;
|
|
|
|
/* Configure timings: */
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
|
|
ret = regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
|
|
DCU_HSYN_PARA_BP(hbp) |
|
|
DCU_HSYN_PARA_PW(hsw) |
|
|
DCU_HSYN_PARA_FP(hfp));
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
|
|
DCU_VSYN_PARA_BP(vbp) |
|
|
DCU_VSYN_PARA_PW(vsw) |
|
|
DCU_VSYN_PARA_FP(vfp));
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
|
|
DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
|
|
DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_SYN_POL,
|
|
DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
|
|
DCU_BGND_G(0) | DCU_BGND_B(0));
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
|
|
DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN);
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_THRESHOLD,
|
|
DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
|
|
DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
|
|
DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
|
|
if (ret)
|
|
goto set_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
|
|
DCU_UPDATE_MODE_READREG);
|
|
if (ret)
|
|
goto set_failed;
|
|
return;
|
|
set_failed:
|
|
dev_err(dev->dev, "set DCU register failed\n");
|
|
}
|
|
|
|
static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs = {
|
|
.atomic_begin = fsl_dcu_drm_crtc_atomic_begin,
|
|
.atomic_check = fsl_dcu_drm_crtc_atomic_check,
|
|
.atomic_flush = fsl_dcu_drm_crtc_atomic_flush,
|
|
.disable = fsl_dcu_drm_disable_crtc,
|
|
.enable = fsl_dcu_drm_crtc_enable,
|
|
.mode_fixup = fsl_dcu_drm_crtc_mode_fixup,
|
|
.mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb,
|
|
};
|
|
|
|
static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
|
|
.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
|
|
.destroy = drm_crtc_cleanup,
|
|
.page_flip = drm_atomic_helper_page_flip,
|
|
.reset = drm_atomic_helper_crtc_reset,
|
|
.set_config = drm_atomic_helper_set_config,
|
|
};
|
|
|
|
int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev)
|
|
{
|
|
struct drm_plane *primary;
|
|
struct drm_crtc *crtc = &fsl_dev->crtc;
|
|
unsigned int i, j, reg_num;
|
|
int ret;
|
|
|
|
primary = fsl_dcu_drm_primary_create_plane(fsl_dev->drm);
|
|
ret = drm_crtc_init_with_planes(fsl_dev->drm, crtc, primary, NULL,
|
|
&fsl_dcu_drm_crtc_funcs);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs);
|
|
|
|
if (!strcmp(fsl_dev->soc->name, "ls1021a"))
|
|
reg_num = LS1021A_LAYER_REG_NUM;
|
|
else
|
|
reg_num = VF610_LAYER_REG_NUM;
|
|
for (i = 0; i <= fsl_dev->soc->total_layer; i++) {
|
|
for (j = 0; j < reg_num; j++) {
|
|
ret = regmap_write(fsl_dev->regmap,
|
|
DCU_CTRLDESCLN(i, j), 0);
|
|
if (ret)
|
|
goto init_failed;
|
|
}
|
|
}
|
|
ret = regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
|
|
DCU_MODE_DCU_MODE_MASK,
|
|
DCU_MODE_DCU_MODE(DCU_MODE_OFF));
|
|
if (ret)
|
|
goto init_failed;
|
|
ret = regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
|
|
DCU_UPDATE_MODE_READREG);
|
|
if (ret)
|
|
goto init_failed;
|
|
|
|
return 0;
|
|
init_failed:
|
|
dev_err(fsl_dev->dev, "init DCU register failed\n");
|
|
return ret;
|
|
}
|