linux/block/blk-core.c
Shaohua Li 56ebdaf2fa block: simplify force plug flush code a little bit
Cleaning up the code a little bit. attempt_plug_merge() traverses the plug
list anyway, we can do the request counting there, so stack size is reduced
a little bit.
The motivation here is I suspect if we should count the requests for each
queue (task could handle multiple disks in the meantime), but my test doesn't
show it's worthy doing. If somebody proves we should do it, below change
will make that more easier.

Signed-off-by: Shaohua Li <shli@kernel.org>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-24 16:04:34 +02:00

2799 lines
74 KiB
C

/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1994, Karl Keyte: Added support for disk statistics
* Elevator latency, (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
* Queue request tables / lock, selectable elevator, Jens Axboe <axboe@suse.de>
* kernel-doc documentation started by NeilBrown <neilb@cse.unsw.edu.au>
* - July2000
* bio rewrite, highmem i/o, etc, Jens Axboe <axboe@suse.de> - may 2001
*/
/*
* This handles all read/write requests to block devices
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/backing-dev.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/highmem.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/fault-inject.h>
#include <linux/list_sort.h>
#define CREATE_TRACE_POINTS
#include <trace/events/block.h>
#include "blk.h"
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
static int __make_request(struct request_queue *q, struct bio *bio);
/*
* For the allocated request tables
*/
static struct kmem_cache *request_cachep;
/*
* For queue allocation
*/
struct kmem_cache *blk_requestq_cachep;
/*
* Controlling structure to kblockd
*/
static struct workqueue_struct *kblockd_workqueue;
static void drive_stat_acct(struct request *rq, int new_io)
{
struct hd_struct *part;
int rw = rq_data_dir(rq);
int cpu;
if (!blk_do_io_stat(rq))
return;
cpu = part_stat_lock();
if (!new_io) {
part = rq->part;
part_stat_inc(cpu, part, merges[rw]);
} else {
part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq));
if (!hd_struct_try_get(part)) {
/*
* The partition is already being removed,
* the request will be accounted on the disk only
*
* We take a reference on disk->part0 although that
* partition will never be deleted, so we can treat
* it as any other partition.
*/
part = &rq->rq_disk->part0;
hd_struct_get(part);
}
part_round_stats(cpu, part);
part_inc_in_flight(part, rw);
rq->part = part;
}
part_stat_unlock();
}
void blk_queue_congestion_threshold(struct request_queue *q)
{
int nr;
nr = q->nr_requests - (q->nr_requests / 8) + 1;
if (nr > q->nr_requests)
nr = q->nr_requests;
q->nr_congestion_on = nr;
nr = q->nr_requests - (q->nr_requests / 8) - (q->nr_requests / 16) - 1;
if (nr < 1)
nr = 1;
q->nr_congestion_off = nr;
}
/**
* blk_get_backing_dev_info - get the address of a queue's backing_dev_info
* @bdev: device
*
* Locates the passed device's request queue and returns the address of its
* backing_dev_info
*
* Will return NULL if the request queue cannot be located.
*/
struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev)
{
struct backing_dev_info *ret = NULL;
struct request_queue *q = bdev_get_queue(bdev);
if (q)
ret = &q->backing_dev_info;
return ret;
}
EXPORT_SYMBOL(blk_get_backing_dev_info);
void blk_rq_init(struct request_queue *q, struct request *rq)
{
memset(rq, 0, sizeof(*rq));
INIT_LIST_HEAD(&rq->queuelist);
INIT_LIST_HEAD(&rq->timeout_list);
rq->cpu = -1;
rq->q = q;
rq->__sector = (sector_t) -1;
INIT_HLIST_NODE(&rq->hash);
RB_CLEAR_NODE(&rq->rb_node);
rq->cmd = rq->__cmd;
rq->cmd_len = BLK_MAX_CDB;
rq->tag = -1;
rq->ref_count = 1;
rq->start_time = jiffies;
set_start_time_ns(rq);
rq->part = NULL;
}
EXPORT_SYMBOL(blk_rq_init);
static void req_bio_endio(struct request *rq, struct bio *bio,
unsigned int nbytes, int error)
{
if (error)
clear_bit(BIO_UPTODATE, &bio->bi_flags);
else if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
error = -EIO;
if (unlikely(nbytes > bio->bi_size)) {
printk(KERN_ERR "%s: want %u bytes done, %u left\n",
__func__, nbytes, bio->bi_size);
nbytes = bio->bi_size;
}
if (unlikely(rq->cmd_flags & REQ_QUIET))
set_bit(BIO_QUIET, &bio->bi_flags);
bio->bi_size -= nbytes;
bio->bi_sector += (nbytes >> 9);
if (bio_integrity(bio))
bio_integrity_advance(bio, nbytes);
/* don't actually finish bio if it's part of flush sequence */
if (bio->bi_size == 0 && !(rq->cmd_flags & REQ_FLUSH_SEQ))
bio_endio(bio, error);
}
void blk_dump_rq_flags(struct request *rq, char *msg)
{
int bit;
printk(KERN_INFO "%s: dev %s: type=%x, flags=%x\n", msg,
rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->cmd_type,
rq->cmd_flags);
printk(KERN_INFO " sector %llu, nr/cnr %u/%u\n",
(unsigned long long)blk_rq_pos(rq),
blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
printk(KERN_INFO " cdb: ");
for (bit = 0; bit < BLK_MAX_CDB; bit++)
printk("%02x ", rq->cmd[bit]);
printk("\n");
}
}
EXPORT_SYMBOL(blk_dump_rq_flags);
static void blk_delay_work(struct work_struct *work)
{
struct request_queue *q;
q = container_of(work, struct request_queue, delay_work.work);
spin_lock_irq(q->queue_lock);
__blk_run_queue(q);
spin_unlock_irq(q->queue_lock);
}
/**
* blk_delay_queue - restart queueing after defined interval
* @q: The &struct request_queue in question
* @msecs: Delay in msecs
*
* Description:
* Sometimes queueing needs to be postponed for a little while, to allow
* resources to come back. This function will make sure that queueing is
* restarted around the specified time.
*/
void blk_delay_queue(struct request_queue *q, unsigned long msecs)
{
queue_delayed_work(kblockd_workqueue, &q->delay_work,
msecs_to_jiffies(msecs));
}
EXPORT_SYMBOL(blk_delay_queue);
/**
* blk_start_queue - restart a previously stopped queue
* @q: The &struct request_queue in question
*
* Description:
* blk_start_queue() will clear the stop flag on the queue, and call
* the request_fn for the queue if it was in a stopped state when
* entered. Also see blk_stop_queue(). Queue lock must be held.
**/
void blk_start_queue(struct request_queue *q)
{
WARN_ON(!irqs_disabled());
queue_flag_clear(QUEUE_FLAG_STOPPED, q);
__blk_run_queue(q);
}
EXPORT_SYMBOL(blk_start_queue);
/**
* blk_stop_queue - stop a queue
* @q: The &struct request_queue in question
*
* Description:
* The Linux block layer assumes that a block driver will consume all
* entries on the request queue when the request_fn strategy is called.
* Often this will not happen, because of hardware limitations (queue
* depth settings). If a device driver gets a 'queue full' response,
* or if it simply chooses not to queue more I/O at one point, it can
* call this function to prevent the request_fn from being called until
* the driver has signalled it's ready to go again. This happens by calling
* blk_start_queue() to restart queue operations. Queue lock must be held.
**/
void blk_stop_queue(struct request_queue *q)
{
__cancel_delayed_work(&q->delay_work);
queue_flag_set(QUEUE_FLAG_STOPPED, q);
}
EXPORT_SYMBOL(blk_stop_queue);
/**
* blk_sync_queue - cancel any pending callbacks on a queue
* @q: the queue
*
* Description:
* The block layer may perform asynchronous callback activity
* on a queue, such as calling the unplug function after a timeout.
* A block device may call blk_sync_queue to ensure that any
* such activity is cancelled, thus allowing it to release resources
* that the callbacks might use. The caller must already have made sure
* that its ->make_request_fn will not re-add plugging prior to calling
* this function.
*
* This function does not cancel any asynchronous activity arising
* out of elevator or throttling code. That would require elevaotor_exit()
* and blk_throtl_exit() to be called with queue lock initialized.
*
*/
void blk_sync_queue(struct request_queue *q)
{
del_timer_sync(&q->timeout);
cancel_delayed_work_sync(&q->delay_work);
}
EXPORT_SYMBOL(blk_sync_queue);
/**
* __blk_run_queue - run a single device queue
* @q: The queue to run
*
* Description:
* See @blk_run_queue. This variant must be called with the queue lock
* held and interrupts disabled.
*/
void __blk_run_queue(struct request_queue *q)
{
if (unlikely(blk_queue_stopped(q)))
return;
q->request_fn(q);
}
EXPORT_SYMBOL(__blk_run_queue);
/**
* blk_run_queue_async - run a single device queue in workqueue context
* @q: The queue to run
*
* Description:
* Tells kblockd to perform the equivalent of @blk_run_queue on behalf
* of us.
*/
void blk_run_queue_async(struct request_queue *q)
{
if (likely(!blk_queue_stopped(q))) {
__cancel_delayed_work(&q->delay_work);
queue_delayed_work(kblockd_workqueue, &q->delay_work, 0);
}
}
EXPORT_SYMBOL(blk_run_queue_async);
/**
* blk_run_queue - run a single device queue
* @q: The queue to run
*
* Description:
* Invoke request handling on this queue, if it has pending work to do.
* May be used to restart queueing when a request has completed.
*/
void blk_run_queue(struct request_queue *q)
{
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
__blk_run_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_run_queue);
void blk_put_queue(struct request_queue *q)
{
kobject_put(&q->kobj);
}
EXPORT_SYMBOL(blk_put_queue);
/*
* Note: If a driver supplied the queue lock, it should not zap that lock
* unexpectedly as some queue cleanup components like elevator_exit() and
* blk_throtl_exit() need queue lock.
*/
void blk_cleanup_queue(struct request_queue *q)
{
/*
* We know we have process context here, so we can be a little
* cautious and ensure that pending block actions on this device
* are done before moving on. Going into this function, we should
* not have processes doing IO to this device.
*/
blk_sync_queue(q);
del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
mutex_lock(&q->sysfs_lock);
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
mutex_unlock(&q->sysfs_lock);
if (q->elevator)
elevator_exit(q->elevator);
blk_throtl_exit(q);
blk_put_queue(q);
}
EXPORT_SYMBOL(blk_cleanup_queue);
static int blk_init_free_list(struct request_queue *q)
{
struct request_list *rl = &q->rq;
if (unlikely(rl->rq_pool))
return 0;
rl->count[BLK_RW_SYNC] = rl->count[BLK_RW_ASYNC] = 0;
rl->starved[BLK_RW_SYNC] = rl->starved[BLK_RW_ASYNC] = 0;
rl->elvpriv = 0;
init_waitqueue_head(&rl->wait[BLK_RW_SYNC]);
init_waitqueue_head(&rl->wait[BLK_RW_ASYNC]);
rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab,
mempool_free_slab, request_cachep, q->node);
if (!rl->rq_pool)
return -ENOMEM;
return 0;
}
struct request_queue *blk_alloc_queue(gfp_t gfp_mask)
{
return blk_alloc_queue_node(gfp_mask, -1);
}
EXPORT_SYMBOL(blk_alloc_queue);
struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
{
struct request_queue *q;
int err;
q = kmem_cache_alloc_node(blk_requestq_cachep,
gfp_mask | __GFP_ZERO, node_id);
if (!q)
return NULL;
q->backing_dev_info.ra_pages =
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
q->backing_dev_info.state = 0;
q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
q->backing_dev_info.name = "block";
err = bdi_init(&q->backing_dev_info);
if (err) {
kmem_cache_free(blk_requestq_cachep, q);
return NULL;
}
if (blk_throtl_init(q)) {
kmem_cache_free(blk_requestq_cachep, q);
return NULL;
}
setup_timer(&q->backing_dev_info.laptop_mode_wb_timer,
laptop_mode_timer_fn, (unsigned long) q);
setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q);
INIT_LIST_HEAD(&q->timeout_list);
INIT_LIST_HEAD(&q->flush_queue[0]);
INIT_LIST_HEAD(&q->flush_queue[1]);
INIT_LIST_HEAD(&q->flush_data_in_flight);
INIT_DELAYED_WORK(&q->delay_work, blk_delay_work);
kobject_init(&q->kobj, &blk_queue_ktype);
mutex_init(&q->sysfs_lock);
spin_lock_init(&q->__queue_lock);
/*
* By default initialize queue_lock to internal lock and driver can
* override it later if need be.
*/
q->queue_lock = &q->__queue_lock;
return q;
}
EXPORT_SYMBOL(blk_alloc_queue_node);
/**
* blk_init_queue - prepare a request queue for use with a block device
* @rfn: The function to be called to process requests that have been
* placed on the queue.
* @lock: Request queue spin lock
*
* Description:
* If a block device wishes to use the standard request handling procedures,
* which sorts requests and coalesces adjacent requests, then it must
* call blk_init_queue(). The function @rfn will be called when there
* are requests on the queue that need to be processed. If the device
* supports plugging, then @rfn may not be called immediately when requests
* are available on the queue, but may be called at some time later instead.
* Plugged queues are generally unplugged when a buffer belonging to one
* of the requests on the queue is needed, or due to memory pressure.
*
* @rfn is not required, or even expected, to remove all requests off the
* queue, but only as many as it can handle at a time. If it does leave
* requests on the queue, it is responsible for arranging that the requests
* get dealt with eventually.
*
* The queue spin lock must be held while manipulating the requests on the
* request queue; this lock will be taken also from interrupt context, so irq
* disabling is needed for it.
*
* Function returns a pointer to the initialized request queue, or %NULL if
* it didn't succeed.
*
* Note:
* blk_init_queue() must be paired with a blk_cleanup_queue() call
* when the block device is deactivated (such as at module unload).
**/
struct request_queue *blk_init_queue(request_fn_proc *rfn, spinlock_t *lock)
{
return blk_init_queue_node(rfn, lock, -1);
}
EXPORT_SYMBOL(blk_init_queue);
struct request_queue *
blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
{
struct request_queue *uninit_q, *q;
uninit_q = blk_alloc_queue_node(GFP_KERNEL, node_id);
if (!uninit_q)
return NULL;
q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id);
if (!q)
blk_cleanup_queue(uninit_q);
return q;
}
EXPORT_SYMBOL(blk_init_queue_node);
struct request_queue *
blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
spinlock_t *lock)
{
return blk_init_allocated_queue_node(q, rfn, lock, -1);
}
EXPORT_SYMBOL(blk_init_allocated_queue);
struct request_queue *
blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
spinlock_t *lock, int node_id)
{
if (!q)
return NULL;
q->node = node_id;
if (blk_init_free_list(q))
return NULL;
q->request_fn = rfn;
q->prep_rq_fn = NULL;
q->unprep_rq_fn = NULL;
q->queue_flags = QUEUE_FLAG_DEFAULT;
/* Override internal queue lock with supplied lock pointer */
if (lock)
q->queue_lock = lock;
/*
* This also sets hw/phys segments, boundary and size
*/
blk_queue_make_request(q, __make_request);
q->sg_reserved_size = INT_MAX;
/*
* all done
*/
if (!elevator_init(q, NULL)) {
blk_queue_congestion_threshold(q);
return q;
}
return NULL;
}
EXPORT_SYMBOL(blk_init_allocated_queue_node);
int blk_get_queue(struct request_queue *q)
{
if (likely(!test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) {
kobject_get(&q->kobj);
return 0;
}
return 1;
}
EXPORT_SYMBOL(blk_get_queue);
static inline void blk_free_request(struct request_queue *q, struct request *rq)
{
if (rq->cmd_flags & REQ_ELVPRIV)
elv_put_request(q, rq);
mempool_free(rq, q->rq.rq_pool);
}
static struct request *
blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
{
struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
if (!rq)
return NULL;
blk_rq_init(q, rq);
rq->cmd_flags = flags | REQ_ALLOCED;
if (priv) {
if (unlikely(elv_set_request(q, rq, gfp_mask))) {
mempool_free(rq, q->rq.rq_pool);
return NULL;
}
rq->cmd_flags |= REQ_ELVPRIV;
}
return rq;
}
/*
* ioc_batching returns true if the ioc is a valid batching request and
* should be given priority access to a request.
*/
static inline int ioc_batching(struct request_queue *q, struct io_context *ioc)
{
if (!ioc)
return 0;
/*
* Make sure the process is able to allocate at least 1 request
* even if the batch times out, otherwise we could theoretically
* lose wakeups.
*/
return ioc->nr_batch_requests == q->nr_batching ||
(ioc->nr_batch_requests > 0
&& time_before(jiffies, ioc->last_waited + BLK_BATCH_TIME));
}
/*
* ioc_set_batching sets ioc to be a new "batcher" if it is not one. This
* will cause the process to be a "batcher" on all queues in the system. This
* is the behaviour we want though - once it gets a wakeup it should be given
* a nice run.
*/
static void ioc_set_batching(struct request_queue *q, struct io_context *ioc)
{
if (!ioc || ioc_batching(q, ioc))
return;
ioc->nr_batch_requests = q->nr_batching;
ioc->last_waited = jiffies;
}
static void __freed_request(struct request_queue *q, int sync)
{
struct request_list *rl = &q->rq;
if (rl->count[sync] < queue_congestion_off_threshold(q))
blk_clear_queue_congested(q, sync);
if (rl->count[sync] + 1 <= q->nr_requests) {
if (waitqueue_active(&rl->wait[sync]))
wake_up(&rl->wait[sync]);
blk_clear_queue_full(q, sync);
}
}
/*
* A request has just been released. Account for it, update the full and
* congestion status, wake up any waiters. Called under q->queue_lock.
*/
static void freed_request(struct request_queue *q, int sync, int priv)
{
struct request_list *rl = &q->rq;
rl->count[sync]--;
if (priv)
rl->elvpriv--;
__freed_request(q, sync);
if (unlikely(rl->starved[sync ^ 1]))
__freed_request(q, sync ^ 1);
}
/*
* Determine if elevator data should be initialized when allocating the
* request associated with @bio.
*/
static bool blk_rq_should_init_elevator(struct bio *bio)
{
if (!bio)
return true;
/*
* Flush requests do not use the elevator so skip initialization.
* This allows a request to share the flush and elevator data.
*/
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA))
return false;
return true;
}
/*
* Get a free request, queue_lock must be held.
* Returns NULL on failure, with queue_lock held.
* Returns !NULL on success, with queue_lock *not held*.
*/
static struct request *get_request(struct request_queue *q, int rw_flags,
struct bio *bio, gfp_t gfp_mask)
{
struct request *rq = NULL;
struct request_list *rl = &q->rq;
struct io_context *ioc = NULL;
const bool is_sync = rw_is_sync(rw_flags) != 0;
int may_queue, priv = 0;
may_queue = elv_may_queue(q, rw_flags);
if (may_queue == ELV_MQUEUE_NO)
goto rq_starved;
if (rl->count[is_sync]+1 >= queue_congestion_on_threshold(q)) {
if (rl->count[is_sync]+1 >= q->nr_requests) {
ioc = current_io_context(GFP_ATOMIC, q->node);
/*
* The queue will fill after this allocation, so set
* it as full, and mark this process as "batching".
* This process will be allowed to complete a batch of
* requests, others will be blocked.
*/
if (!blk_queue_full(q, is_sync)) {
ioc_set_batching(q, ioc);
blk_set_queue_full(q, is_sync);
} else {
if (may_queue != ELV_MQUEUE_MUST
&& !ioc_batching(q, ioc)) {
/*
* The queue is full and the allocating
* process is not a "batcher", and not
* exempted by the IO scheduler
*/
goto out;
}
}
}
blk_set_queue_congested(q, is_sync);
}
/*
* Only allow batching queuers to allocate up to 50% over the defined
* limit of requests, otherwise we could have thousands of requests
* allocated with any setting of ->nr_requests
*/
if (rl->count[is_sync] >= (3 * q->nr_requests / 2))
goto out;
rl->count[is_sync]++;
rl->starved[is_sync] = 0;
if (blk_rq_should_init_elevator(bio)) {
priv = !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
if (priv)
rl->elvpriv++;
}
if (blk_queue_io_stat(q))
rw_flags |= REQ_IO_STAT;
spin_unlock_irq(q->queue_lock);
rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
if (unlikely(!rq)) {
/*
* Allocation failed presumably due to memory. Undo anything
* we might have messed up.
*
* Allocating task should really be put onto the front of the
* wait queue, but this is pretty rare.
*/
spin_lock_irq(q->queue_lock);
freed_request(q, is_sync, priv);
/*
* in the very unlikely event that allocation failed and no
* requests for this direction was pending, mark us starved
* so that freeing of a request in the other direction will
* notice us. another possible fix would be to split the
* rq mempool into READ and WRITE
*/
rq_starved:
if (unlikely(rl->count[is_sync] == 0))
rl->starved[is_sync] = 1;
goto out;
}
/*
* ioc may be NULL here, and ioc_batching will be false. That's
* OK, if the queue is under the request limit then requests need
* not count toward the nr_batch_requests limit. There will always
* be some limit enforced by BLK_BATCH_TIME.
*/
if (ioc_batching(q, ioc))
ioc->nr_batch_requests--;
trace_block_getrq(q, bio, rw_flags & 1);
out:
return rq;
}
/*
* No available requests for this queue, wait for some requests to become
* available.
*
* Called with q->queue_lock held, and returns with it unlocked.
*/
static struct request *get_request_wait(struct request_queue *q, int rw_flags,
struct bio *bio)
{
const bool is_sync = rw_is_sync(rw_flags) != 0;
struct request *rq;
rq = get_request(q, rw_flags, bio, GFP_NOIO);
while (!rq) {
DEFINE_WAIT(wait);
struct io_context *ioc;
struct request_list *rl = &q->rq;
prepare_to_wait_exclusive(&rl->wait[is_sync], &wait,
TASK_UNINTERRUPTIBLE);
trace_block_sleeprq(q, bio, rw_flags & 1);
spin_unlock_irq(q->queue_lock);
io_schedule();
/*
* After sleeping, we become a "batching" process and
* will be able to allocate at least one request, and
* up to a big batch of them for a small period time.
* See ioc_batching, ioc_set_batching
*/
ioc = current_io_context(GFP_NOIO, q->node);
ioc_set_batching(q, ioc);
spin_lock_irq(q->queue_lock);
finish_wait(&rl->wait[is_sync], &wait);
rq = get_request(q, rw_flags, bio, GFP_NOIO);
};
return rq;
}
struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask)
{
struct request *rq;
if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
return NULL;
BUG_ON(rw != READ && rw != WRITE);
spin_lock_irq(q->queue_lock);
if (gfp_mask & __GFP_WAIT) {
rq = get_request_wait(q, rw, NULL);
} else {
rq = get_request(q, rw, NULL, gfp_mask);
if (!rq)
spin_unlock_irq(q->queue_lock);
}
/* q->queue_lock is unlocked at this point */
return rq;
}
EXPORT_SYMBOL(blk_get_request);
/**
* blk_make_request - given a bio, allocate a corresponding struct request.
* @q: target request queue
* @bio: The bio describing the memory mappings that will be submitted for IO.
* It may be a chained-bio properly constructed by block/bio layer.
* @gfp_mask: gfp flags to be used for memory allocation
*
* blk_make_request is the parallel of generic_make_request for BLOCK_PC
* type commands. Where the struct request needs to be farther initialized by
* the caller. It is passed a &struct bio, which describes the memory info of
* the I/O transfer.
*
* The caller of blk_make_request must make sure that bi_io_vec
* are set to describe the memory buffers. That bio_data_dir() will return
* the needed direction of the request. (And all bio's in the passed bio-chain
* are properly set accordingly)
*
* If called under none-sleepable conditions, mapped bio buffers must not
* need bouncing, by calling the appropriate masked or flagged allocator,
* suitable for the target device. Otherwise the call to blk_queue_bounce will
* BUG.
*
* WARNING: When allocating/cloning a bio-chain, careful consideration should be
* given to how you allocate bios. In particular, you cannot use __GFP_WAIT for
* anything but the first bio in the chain. Otherwise you risk waiting for IO
* completion of a bio that hasn't been submitted yet, thus resulting in a
* deadlock. Alternatively bios should be allocated using bio_kmalloc() instead
* of bio_alloc(), as that avoids the mempool deadlock.
* If possible a big IO should be split into smaller parts when allocation
* fails. Partial allocation should not be an error, or you risk a live-lock.
*/
struct request *blk_make_request(struct request_queue *q, struct bio *bio,
gfp_t gfp_mask)
{
struct request *rq = blk_get_request(q, bio_data_dir(bio), gfp_mask);
if (unlikely(!rq))
return ERR_PTR(-ENOMEM);
for_each_bio(bio) {
struct bio *bounce_bio = bio;
int ret;
blk_queue_bounce(q, &bounce_bio);
ret = blk_rq_append_bio(q, rq, bounce_bio);
if (unlikely(ret)) {
blk_put_request(rq);
return ERR_PTR(ret);
}
}
return rq;
}
EXPORT_SYMBOL(blk_make_request);
/**
* blk_requeue_request - put a request back on queue
* @q: request queue where request should be inserted
* @rq: request to be inserted
*
* Description:
* Drivers often keep queueing requests until the hardware cannot accept
* more, when that condition happens we need to put the request back
* on the queue. Must be called with queue lock held.
*/
void blk_requeue_request(struct request_queue *q, struct request *rq)
{
blk_delete_timer(rq);
blk_clear_rq_complete(rq);
trace_block_rq_requeue(q, rq);
if (blk_rq_tagged(rq))
blk_queue_end_tag(q, rq);
BUG_ON(blk_queued_rq(rq));
elv_requeue_request(q, rq);
}
EXPORT_SYMBOL(blk_requeue_request);
static void add_acct_request(struct request_queue *q, struct request *rq,
int where)
{
drive_stat_acct(rq, 1);
__elv_add_request(q, rq, where);
}
/**
* blk_insert_request - insert a special request into a request queue
* @q: request queue where request should be inserted
* @rq: request to be inserted
* @at_head: insert request at head or tail of queue
* @data: private data
*
* Description:
* Many block devices need to execute commands asynchronously, so they don't
* block the whole kernel from preemption during request execution. This is
* accomplished normally by inserting aritficial requests tagged as
* REQ_TYPE_SPECIAL in to the corresponding request queue, and letting them
* be scheduled for actual execution by the request queue.
*
* We have the option of inserting the head or the tail of the queue.
* Typically we use the tail for new ioctls and so forth. We use the head
* of the queue for things like a QUEUE_FULL message from a device, or a
* host that is unable to accept a particular command.
*/
void blk_insert_request(struct request_queue *q, struct request *rq,
int at_head, void *data)
{
int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
unsigned long flags;
/*
* tell I/O scheduler that this isn't a regular read/write (ie it
* must not attempt merges on this) and that it acts as a soft
* barrier
*/
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->special = data;
spin_lock_irqsave(q->queue_lock, flags);
/*
* If command is tagged, release the tag
*/
if (blk_rq_tagged(rq))
blk_queue_end_tag(q, rq);
add_acct_request(q, rq, where);
__blk_run_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_insert_request);
static void part_round_stats_single(int cpu, struct hd_struct *part,
unsigned long now)
{
if (now == part->stamp)
return;
if (part_in_flight(part)) {
__part_stat_add(cpu, part, time_in_queue,
part_in_flight(part) * (now - part->stamp));
__part_stat_add(cpu, part, io_ticks, (now - part->stamp));
}
part->stamp = now;
}
/**
* part_round_stats() - Round off the performance stats on a struct disk_stats.
* @cpu: cpu number for stats access
* @part: target partition
*
* The average IO queue length and utilisation statistics are maintained
* by observing the current state of the queue length and the amount of
* time it has been in this state for.
*
* Normally, that accounting is done on IO completion, but that can result
* in more than a second's worth of IO being accounted for within any one
* second, leading to >100% utilisation. To deal with that, we call this
* function to do a round-off before returning the results when reading
* /proc/diskstats. This accounts immediately for all queue usage up to
* the current jiffies and restarts the counters again.
*/
void part_round_stats(int cpu, struct hd_struct *part)
{
unsigned long now = jiffies;
if (part->partno)
part_round_stats_single(cpu, &part_to_disk(part)->part0, now);
part_round_stats_single(cpu, part, now);
}
EXPORT_SYMBOL_GPL(part_round_stats);
/*
* queue lock must be held
*/
void __blk_put_request(struct request_queue *q, struct request *req)
{
if (unlikely(!q))
return;
if (unlikely(--req->ref_count))
return;
elv_completed_request(q, req);
/* this is a bio leak */
WARN_ON(req->bio != NULL);
/*
* Request may not have originated from ll_rw_blk. if not,
* it didn't come out of our reserved rq pools
*/
if (req->cmd_flags & REQ_ALLOCED) {
int is_sync = rq_is_sync(req) != 0;
int priv = req->cmd_flags & REQ_ELVPRIV;
BUG_ON(!list_empty(&req->queuelist));
BUG_ON(!hlist_unhashed(&req->hash));
blk_free_request(q, req);
freed_request(q, is_sync, priv);
}
}
EXPORT_SYMBOL_GPL(__blk_put_request);
void blk_put_request(struct request *req)
{
unsigned long flags;
struct request_queue *q = req->q;
spin_lock_irqsave(q->queue_lock, flags);
__blk_put_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_put_request);
/**
* blk_add_request_payload - add a payload to a request
* @rq: request to update
* @page: page backing the payload
* @len: length of the payload.
*
* This allows to later add a payload to an already submitted request by
* a block driver. The driver needs to take care of freeing the payload
* itself.
*
* Note that this is a quite horrible hack and nothing but handling of
* discard requests should ever use it.
*/
void blk_add_request_payload(struct request *rq, struct page *page,
unsigned int len)
{
struct bio *bio = rq->bio;
bio->bi_io_vec->bv_page = page;
bio->bi_io_vec->bv_offset = 0;
bio->bi_io_vec->bv_len = len;
bio->bi_size = len;
bio->bi_vcnt = 1;
bio->bi_phys_segments = 1;
rq->__data_len = rq->resid_len = len;
rq->nr_phys_segments = 1;
rq->buffer = bio_data(bio);
}
EXPORT_SYMBOL_GPL(blk_add_request_payload);
static bool bio_attempt_back_merge(struct request_queue *q, struct request *req,
struct bio *bio)
{
const int ff = bio->bi_rw & REQ_FAILFAST_MASK;
if (!ll_back_merge_fn(q, req, bio))
return false;
trace_block_bio_backmerge(q, bio);
if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
blk_rq_set_mixed_merge(req);
req->biotail->bi_next = bio;
req->biotail = bio;
req->__data_len += bio->bi_size;
req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));
drive_stat_acct(req, 0);
elv_bio_merged(q, req, bio);
return true;
}
static bool bio_attempt_front_merge(struct request_queue *q,
struct request *req, struct bio *bio)
{
const int ff = bio->bi_rw & REQ_FAILFAST_MASK;
if (!ll_front_merge_fn(q, req, bio))
return false;
trace_block_bio_frontmerge(q, bio);
if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
blk_rq_set_mixed_merge(req);
bio->bi_next = req->bio;
req->bio = bio;
/*
* may not be valid. if the low level driver said
* it didn't need a bounce buffer then it better
* not touch req->buffer either...
*/
req->buffer = bio_data(bio);
req->__sector = bio->bi_sector;
req->__data_len += bio->bi_size;
req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));
drive_stat_acct(req, 0);
elv_bio_merged(q, req, bio);
return true;
}
/*
* Attempts to merge with the plugged list in the current process. Returns
* true if merge was successful, otherwise false.
*/
static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
struct bio *bio, unsigned int *request_count)
{
struct blk_plug *plug;
struct request *rq;
bool ret = false;
plug = tsk->plug;
if (!plug)
goto out;
*request_count = 0;
list_for_each_entry_reverse(rq, &plug->list, queuelist) {
int el_ret;
(*request_count)++;
if (rq->q != q)
continue;
el_ret = elv_try_merge(rq, bio);
if (el_ret == ELEVATOR_BACK_MERGE) {
ret = bio_attempt_back_merge(q, rq, bio);
if (ret)
break;
} else if (el_ret == ELEVATOR_FRONT_MERGE) {
ret = bio_attempt_front_merge(q, rq, bio);
if (ret)
break;
}
}
out:
return ret;
}
void init_request_from_bio(struct request *req, struct bio *bio)
{
req->cpu = bio->bi_comp_cpu;
req->cmd_type = REQ_TYPE_FS;
req->cmd_flags |= bio->bi_rw & REQ_COMMON_MASK;
if (bio->bi_rw & REQ_RAHEAD)
req->cmd_flags |= REQ_FAILFAST_MASK;
req->errors = 0;
req->__sector = bio->bi_sector;
req->ioprio = bio_prio(bio);
blk_rq_bio_prep(req->q, req, bio);
}
static int __make_request(struct request_queue *q, struct bio *bio)
{
const bool sync = !!(bio->bi_rw & REQ_SYNC);
struct blk_plug *plug;
int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT;
struct request *req;
unsigned int request_count = 0;
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
* ISA dma in theory)
*/
blk_queue_bounce(q, &bio);
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
spin_lock_irq(q->queue_lock);
where = ELEVATOR_INSERT_FLUSH;
goto get_rq;
}
/*
* Check if we can merge with the plugged list before grabbing
* any locks.
*/
if (attempt_plug_merge(current, q, bio, &request_count))
goto out;
spin_lock_irq(q->queue_lock);
el_ret = elv_merge(q, &req, bio);
if (el_ret == ELEVATOR_BACK_MERGE) {
if (bio_attempt_back_merge(q, req, bio)) {
if (!attempt_back_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out_unlock;
}
} else if (el_ret == ELEVATOR_FRONT_MERGE) {
if (bio_attempt_front_merge(q, req, bio)) {
if (!attempt_front_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out_unlock;
}
}
get_rq:
/*
* This sync check and mask will be re-done in init_request_from_bio(),
* but we need to set it earlier to expose the sync flag to the
* rq allocator and io schedulers.
*/
rw_flags = bio_data_dir(bio);
if (sync)
rw_flags |= REQ_SYNC;
/*
* Grab a free request. This is might sleep but can not fail.
* Returns with the queue unlocked.
*/
req = get_request_wait(q, rw_flags, bio);
/*
* After dropping the lock and possibly sleeping here, our request
* may now be mergeable after it had proven unmergeable (above).
* We don't worry about that case for efficiency. It won't happen
* often, and the elevators are able to handle it.
*/
init_request_from_bio(req, bio);
if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) ||
bio_flagged(bio, BIO_CPU_AFFINE))
req->cpu = raw_smp_processor_id();
plug = current->plug;
if (plug) {
/*
* If this is the first request added after a plug, fire
* of a plug trace. If others have been added before, check
* if we have multiple devices in this plug. If so, make a
* note to sort the list before dispatch.
*/
if (list_empty(&plug->list))
trace_block_plug(q);
else if (!plug->should_sort) {
struct request *__rq;
__rq = list_entry_rq(plug->list.prev);
if (__rq->q != q)
plug->should_sort = 1;
}
if (request_count >= BLK_MAX_REQUEST_COUNT)
blk_flush_plug_list(plug, false);
list_add_tail(&req->queuelist, &plug->list);
drive_stat_acct(req, 1);
} else {
spin_lock_irq(q->queue_lock);
add_acct_request(q, req, where);
__blk_run_queue(q);
out_unlock:
spin_unlock_irq(q->queue_lock);
}
out:
return 0;
}
/*
* If bio->bi_dev is a partition, remap the location
*/
static inline void blk_partition_remap(struct bio *bio)
{
struct block_device *bdev = bio->bi_bdev;
if (bio_sectors(bio) && bdev != bdev->bd_contains) {
struct hd_struct *p = bdev->bd_part;
bio->bi_sector += p->start_sect;
bio->bi_bdev = bdev->bd_contains;
trace_block_bio_remap(bdev_get_queue(bio->bi_bdev), bio,
bdev->bd_dev,
bio->bi_sector - p->start_sect);
}
}
static void handle_bad_sector(struct bio *bio)
{
char b[BDEVNAME_SIZE];
printk(KERN_INFO "attempt to access beyond end of device\n");
printk(KERN_INFO "%s: rw=%ld, want=%Lu, limit=%Lu\n",
bdevname(bio->bi_bdev, b),
bio->bi_rw,
(unsigned long long)bio->bi_sector + bio_sectors(bio),
(long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
set_bit(BIO_EOF, &bio->bi_flags);
}
#ifdef CONFIG_FAIL_MAKE_REQUEST
static DECLARE_FAULT_ATTR(fail_make_request);
static int __init setup_fail_make_request(char *str)
{
return setup_fault_attr(&fail_make_request, str);
}
__setup("fail_make_request=", setup_fail_make_request);
static bool should_fail_request(struct hd_struct *part, unsigned int bytes)
{
return part->make_it_fail && should_fail(&fail_make_request, bytes);
}
static int __init fail_make_request_debugfs(void)
{
struct dentry *dir = fault_create_debugfs_attr("fail_make_request",
NULL, &fail_make_request);
return IS_ERR(dir) ? PTR_ERR(dir) : 0;
}
late_initcall(fail_make_request_debugfs);
#else /* CONFIG_FAIL_MAKE_REQUEST */
static inline bool should_fail_request(struct hd_struct *part,
unsigned int bytes)
{
return false;
}
#endif /* CONFIG_FAIL_MAKE_REQUEST */
/*
* Check whether this bio extends beyond the end of the device.
*/
static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors)
{
sector_t maxsector;
if (!nr_sectors)
return 0;
/* Test device or partition size, when known. */
maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
if (maxsector) {
sector_t sector = bio->bi_sector;
if (maxsector < nr_sectors || maxsector - nr_sectors < sector) {
/*
* This may well happen - the kernel calls bread()
* without checking the size of the device, e.g., when
* mounting a device.
*/
handle_bad_sector(bio);
return 1;
}
}
return 0;
}
/**
* generic_make_request - hand a buffer to its device driver for I/O
* @bio: The bio describing the location in memory and on the device.
*
* generic_make_request() is used to make I/O requests of block
* devices. It is passed a &struct bio, which describes the I/O that needs
* to be done.
*
* generic_make_request() does not return any status. The
* success/failure status of the request, along with notification of
* completion, is delivered asynchronously through the bio->bi_end_io
* function described (one day) else where.
*
* The caller of generic_make_request must make sure that bi_io_vec
* are set to describe the memory buffer, and that bi_dev and bi_sector are
* set to describe the device address, and the
* bi_end_io and optionally bi_private are set to describe how
* completion notification should be signaled.
*
* generic_make_request and the drivers it calls may use bi_next if this
* bio happens to be merged with someone else, and may change bi_dev and
* bi_sector for remaps as it sees fit. So the values of these fields
* should NOT be depended on after the call to generic_make_request.
*/
static inline void __generic_make_request(struct bio *bio)
{
struct request_queue *q;
sector_t old_sector;
int ret, nr_sectors = bio_sectors(bio);
dev_t old_dev;
int err = -EIO;
might_sleep();
if (bio_check_eod(bio, nr_sectors))
goto end_io;
/*
* Resolve the mapping until finished. (drivers are
* still free to implement/resolve their own stacking
* by explicitly returning 0)
*
* NOTE: we don't repeat the blk_size check for each new device.
* Stacking drivers are expected to know what they are doing.
*/
old_sector = -1;
old_dev = 0;
do {
char b[BDEVNAME_SIZE];
struct hd_struct *part;
q = bdev_get_queue(bio->bi_bdev);
if (unlikely(!q)) {
printk(KERN_ERR
"generic_make_request: Trying to access "
"nonexistent block-device %s (%Lu)\n",
bdevname(bio->bi_bdev, b),
(long long) bio->bi_sector);
goto end_io;
}
if (unlikely(!(bio->bi_rw & REQ_DISCARD) &&
nr_sectors > queue_max_hw_sectors(q))) {
printk(KERN_ERR "bio too big device %s (%u > %u)\n",
bdevname(bio->bi_bdev, b),
bio_sectors(bio),
queue_max_hw_sectors(q));
goto end_io;
}
if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
goto end_io;
part = bio->bi_bdev->bd_part;
if (should_fail_request(part, bio->bi_size) ||
should_fail_request(&part_to_disk(part)->part0,
bio->bi_size))
goto end_io;
/*
* If this device has partitions, remap block n
* of partition p to block n+start(p) of the disk.
*/
blk_partition_remap(bio);
if (bio_integrity_enabled(bio) && bio_integrity_prep(bio))
goto end_io;
if (old_sector != -1)
trace_block_bio_remap(q, bio, old_dev, old_sector);
old_sector = bio->bi_sector;
old_dev = bio->bi_bdev->bd_dev;
if (bio_check_eod(bio, nr_sectors))
goto end_io;
/*
* Filter flush bio's early so that make_request based
* drivers without flush support don't have to worry
* about them.
*/
if ((bio->bi_rw & (REQ_FLUSH | REQ_FUA)) && !q->flush_flags) {
bio->bi_rw &= ~(REQ_FLUSH | REQ_FUA);
if (!nr_sectors) {
err = 0;
goto end_io;
}
}
if ((bio->bi_rw & REQ_DISCARD) &&
(!blk_queue_discard(q) ||
((bio->bi_rw & REQ_SECURE) &&
!blk_queue_secdiscard(q)))) {
err = -EOPNOTSUPP;
goto end_io;
}
if (blk_throtl_bio(q, &bio))
goto end_io;
/*
* If bio = NULL, bio has been throttled and will be submitted
* later.
*/
if (!bio)
break;
trace_block_bio_queue(q, bio);
ret = q->make_request_fn(q, bio);
} while (ret);
return;
end_io:
bio_endio(bio, err);
}
/*
* We only want one ->make_request_fn to be active at a time,
* else stack usage with stacked devices could be a problem.
* So use current->bio_list to keep a list of requests
* submited by a make_request_fn function.
* current->bio_list is also used as a flag to say if
* generic_make_request is currently active in this task or not.
* If it is NULL, then no make_request is active. If it is non-NULL,
* then a make_request is active, and new requests should be added
* at the tail
*/
void generic_make_request(struct bio *bio)
{
struct bio_list bio_list_on_stack;
if (current->bio_list) {
/* make_request is active */
bio_list_add(current->bio_list, bio);
return;
}
/* following loop may be a bit non-obvious, and so deserves some
* explanation.
* Before entering the loop, bio->bi_next is NULL (as all callers
* ensure that) so we have a list with a single bio.
* We pretend that we have just taken it off a longer list, so
* we assign bio_list to a pointer to the bio_list_on_stack,
* thus initialising the bio_list of new bios to be
* added. __generic_make_request may indeed add some more bios
* through a recursive call to generic_make_request. If it
* did, we find a non-NULL value in bio_list and re-enter the loop
* from the top. In this case we really did just take the bio
* of the top of the list (no pretending) and so remove it from
* bio_list, and call into __generic_make_request again.
*
* The loop was structured like this to make only one call to
* __generic_make_request (which is important as it is large and
* inlined) and to keep the structure simple.
*/
BUG_ON(bio->bi_next);
bio_list_init(&bio_list_on_stack);
current->bio_list = &bio_list_on_stack;
do {
__generic_make_request(bio);
bio = bio_list_pop(current->bio_list);
} while (bio);
current->bio_list = NULL; /* deactivate */
}
EXPORT_SYMBOL(generic_make_request);
/**
* submit_bio - submit a bio to the block device layer for I/O
* @rw: whether to %READ or %WRITE, or maybe to %READA (read ahead)
* @bio: The &struct bio which describes the I/O
*
* submit_bio() is very similar in purpose to generic_make_request(), and
* uses that function to do most of the work. Both are fairly rough
* interfaces; @bio must be presetup and ready for I/O.
*
*/
void submit_bio(int rw, struct bio *bio)
{
int count = bio_sectors(bio);
bio->bi_rw |= rw;
/*
* If it's a regular read/write or a barrier with data attached,
* go through the normal accounting stuff before submission.
*/
if (bio_has_data(bio) && !(rw & REQ_DISCARD)) {
if (rw & WRITE) {
count_vm_events(PGPGOUT, count);
} else {
task_io_account_read(bio->bi_size);
count_vm_events(PGPGIN, count);
}
if (unlikely(block_dump)) {
char b[BDEVNAME_SIZE];
printk(KERN_DEBUG "%s(%d): %s block %Lu on %s (%u sectors)\n",
current->comm, task_pid_nr(current),
(rw & WRITE) ? "WRITE" : "READ",
(unsigned long long)bio->bi_sector,
bdevname(bio->bi_bdev, b),
count);
}
}
generic_make_request(bio);
}
EXPORT_SYMBOL(submit_bio);
/**
* blk_rq_check_limits - Helper function to check a request for the queue limit
* @q: the queue
* @rq: the request being checked
*
* Description:
* @rq may have been made based on weaker limitations of upper-level queues
* in request stacking drivers, and it may violate the limitation of @q.
* Since the block layer and the underlying device driver trust @rq
* after it is inserted to @q, it should be checked against @q before
* the insertion using this generic function.
*
* This function should also be useful for request stacking drivers
* in some cases below, so export this function.
* Request stacking drivers like request-based dm may change the queue
* limits while requests are in the queue (e.g. dm's table swapping).
* Such request stacking drivers should check those requests agaist
* the new queue limits again when they dispatch those requests,
* although such checkings are also done against the old queue limits
* when submitting requests.
*/
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
if (rq->cmd_flags & REQ_DISCARD)
return 0;
if (blk_rq_sectors(rq) > queue_max_sectors(q) ||
blk_rq_bytes(rq) > queue_max_hw_sectors(q) << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
return -EIO;
}
/*
* queue's settings related to segment counting like q->bounce_pfn
* may differ from that of other stacking queues.
* Recalculate it to check the request correctly on this queue's
* limitation.
*/
blk_recalc_rq_segments(rq);
if (rq->nr_phys_segments > queue_max_segments(q)) {
printk(KERN_ERR "%s: over max segments limit.\n", __func__);
return -EIO;
}
return 0;
}
EXPORT_SYMBOL_GPL(blk_rq_check_limits);
/**
* blk_insert_cloned_request - Helper for stacking drivers to submit a request
* @q: the queue to submit the request
* @rq: the request being queued
*/
int blk_insert_cloned_request(struct request_queue *q, struct request *rq)
{
unsigned long flags;
int where = ELEVATOR_INSERT_BACK;
if (blk_rq_check_limits(q, rq))
return -EIO;
if (rq->rq_disk &&
should_fail_request(&rq->rq_disk->part0, blk_rq_bytes(rq)))
return -EIO;
spin_lock_irqsave(q->queue_lock, flags);
/*
* Submitting request must be dequeued before calling this function
* because it will be linked to another request_queue
*/
BUG_ON(blk_queued_rq(rq));
if (rq->cmd_flags & (REQ_FLUSH|REQ_FUA))
where = ELEVATOR_INSERT_FLUSH;
add_acct_request(q, rq, where);
spin_unlock_irqrestore(q->queue_lock, flags);
return 0;
}
EXPORT_SYMBOL_GPL(blk_insert_cloned_request);
/**
* blk_rq_err_bytes - determine number of bytes till the next failure boundary
* @rq: request to examine
*
* Description:
* A request could be merge of IOs which require different failure
* handling. This function determines the number of bytes which
* can be failed from the beginning of the request without
* crossing into area which need to be retried further.
*
* Return:
* The number of bytes to fail.
*
* Context:
* queue_lock must be held.
*/
unsigned int blk_rq_err_bytes(const struct request *rq)
{
unsigned int ff = rq->cmd_flags & REQ_FAILFAST_MASK;
unsigned int bytes = 0;
struct bio *bio;
if (!(rq->cmd_flags & REQ_MIXED_MERGE))
return blk_rq_bytes(rq);
/*
* Currently the only 'mixing' which can happen is between
* different fastfail types. We can safely fail portions
* which have all the failfast bits that the first one has -
* the ones which are at least as eager to fail as the first
* one.
*/
for (bio = rq->bio; bio; bio = bio->bi_next) {
if ((bio->bi_rw & ff) != ff)
break;
bytes += bio->bi_size;
}
/* this could lead to infinite loop */
BUG_ON(blk_rq_bytes(rq) && !bytes);
return bytes;
}
EXPORT_SYMBOL_GPL(blk_rq_err_bytes);
static void blk_account_io_completion(struct request *req, unsigned int bytes)
{
if (blk_do_io_stat(req)) {
const int rw = rq_data_dir(req);
struct hd_struct *part;
int cpu;
cpu = part_stat_lock();
part = req->part;
part_stat_add(cpu, part, sectors[rw], bytes >> 9);
part_stat_unlock();
}
}
static void blk_account_io_done(struct request *req)
{
/*
* Account IO completion. flush_rq isn't accounted as a
* normal IO on queueing nor completion. Accounting the
* containing request is enough.
*/
if (blk_do_io_stat(req) && !(req->cmd_flags & REQ_FLUSH_SEQ)) {
unsigned long duration = jiffies - req->start_time;
const int rw = rq_data_dir(req);
struct hd_struct *part;
int cpu;
cpu = part_stat_lock();
part = req->part;
part_stat_inc(cpu, part, ios[rw]);
part_stat_add(cpu, part, ticks[rw], duration);
part_round_stats(cpu, part);
part_dec_in_flight(part, rw);
hd_struct_put(part);
part_stat_unlock();
}
}
/**
* blk_peek_request - peek at the top of a request queue
* @q: request queue to peek at
*
* Description:
* Return the request at the top of @q. The returned request
* should be started using blk_start_request() before LLD starts
* processing it.
*
* Return:
* Pointer to the request at the top of @q if available. Null
* otherwise.
*
* Context:
* queue_lock must be held.
*/
struct request *blk_peek_request(struct request_queue *q)
{
struct request *rq;
int ret;
while ((rq = __elv_next_request(q)) != NULL) {
if (!(rq->cmd_flags & REQ_STARTED)) {
/*
* This is the first time the device driver
* sees this request (possibly after
* requeueing). Notify IO scheduler.
*/
if (rq->cmd_flags & REQ_SORTED)
elv_activate_rq(q, rq);
/*
* just mark as started even if we don't start
* it, a request that has been delayed should
* not be passed by new incoming requests
*/
rq->cmd_flags |= REQ_STARTED;
trace_block_rq_issue(q, rq);
}
if (!q->boundary_rq || q->boundary_rq == rq) {
q->end_sector = rq_end_sector(rq);
q->boundary_rq = NULL;
}
if (rq->cmd_flags & REQ_DONTPREP)
break;
if (q->dma_drain_size && blk_rq_bytes(rq)) {
/*
* make sure space for the drain appears we
* know we can do this because max_hw_segments
* has been adjusted to be one fewer than the
* device can handle
*/
rq->nr_phys_segments++;
}
if (!q->prep_rq_fn)
break;
ret = q->prep_rq_fn(q, rq);
if (ret == BLKPREP_OK) {
break;
} else if (ret == BLKPREP_DEFER) {
/*
* the request may have been (partially) prepped.
* we need to keep this request in the front to
* avoid resource deadlock. REQ_STARTED will
* prevent other fs requests from passing this one.
*/
if (q->dma_drain_size && blk_rq_bytes(rq) &&
!(rq->cmd_flags & REQ_DONTPREP)) {
/*
* remove the space for the drain we added
* so that we don't add it again
*/
--rq->nr_phys_segments;
}
rq = NULL;
break;
} else if (ret == BLKPREP_KILL) {
rq->cmd_flags |= REQ_QUIET;
/*
* Mark this request as started so we don't trigger
* any debug logic in the end I/O path.
*/
blk_start_request(rq);
__blk_end_request_all(rq, -EIO);
} else {
printk(KERN_ERR "%s: bad return=%d\n", __func__, ret);
break;
}
}
return rq;
}
EXPORT_SYMBOL(blk_peek_request);
void blk_dequeue_request(struct request *rq)
{
struct request_queue *q = rq->q;
BUG_ON(list_empty(&rq->queuelist));
BUG_ON(ELV_ON_HASH(rq));
list_del_init(&rq->queuelist);
/*
* the time frame between a request being removed from the lists
* and to it is freed is accounted as io that is in progress at
* the driver side.
*/
if (blk_account_rq(rq)) {
q->in_flight[rq_is_sync(rq)]++;
set_io_start_time_ns(rq);
}
}
/**
* blk_start_request - start request processing on the driver
* @req: request to dequeue
*
* Description:
* Dequeue @req and start timeout timer on it. This hands off the
* request to the driver.
*
* Block internal functions which don't want to start timer should
* call blk_dequeue_request().
*
* Context:
* queue_lock must be held.
*/
void blk_start_request(struct request *req)
{
blk_dequeue_request(req);
/*
* We are now handing the request to the hardware, initialize
* resid_len to full count and add the timeout handler.
*/
req->resid_len = blk_rq_bytes(req);
if (unlikely(blk_bidi_rq(req)))
req->next_rq->resid_len = blk_rq_bytes(req->next_rq);
blk_add_timer(req);
}
EXPORT_SYMBOL(blk_start_request);
/**
* blk_fetch_request - fetch a request from a request queue
* @q: request queue to fetch a request from
*
* Description:
* Return the request at the top of @q. The request is started on
* return and LLD can start processing it immediately.
*
* Return:
* Pointer to the request at the top of @q if available. Null
* otherwise.
*
* Context:
* queue_lock must be held.
*/
struct request *blk_fetch_request(struct request_queue *q)
{
struct request *rq;
rq = blk_peek_request(q);
if (rq)
blk_start_request(rq);
return rq;
}
EXPORT_SYMBOL(blk_fetch_request);
/**
* blk_update_request - Special helper function for request stacking drivers
* @req: the request being processed
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete @req
*
* Description:
* Ends I/O on a number of bytes attached to @req, but doesn't complete
* the request structure even if @req doesn't have leftover.
* If @req has leftover, sets it up for the next range of segments.
*
* This special helper function is only for request stacking drivers
* (e.g. request-based dm) so that they can handle partial completion.
* Actual device drivers should use blk_end_request instead.
*
* Passing the result of blk_rq_bytes() as @nr_bytes guarantees
* %false return from this function.
*
* Return:
* %false - this request doesn't have any more data
* %true - this request has more data
**/
bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
{
int total_bytes, bio_nbytes, next_idx = 0;
struct bio *bio;
if (!req->bio)
return false;
trace_block_rq_complete(req->q, req);
/*
* For fs requests, rq is just carrier of independent bio's
* and each partial completion should be handled separately.
* Reset per-request error on each partial completion.
*
* TODO: tj: This is too subtle. It would be better to let
* low level drivers do what they see fit.
*/
if (req->cmd_type == REQ_TYPE_FS)
req->errors = 0;
if (error && req->cmd_type == REQ_TYPE_FS &&
!(req->cmd_flags & REQ_QUIET)) {
char *error_type;
switch (error) {
case -ENOLINK:
error_type = "recoverable transport";
break;
case -EREMOTEIO:
error_type = "critical target";
break;
case -EBADE:
error_type = "critical nexus";
break;
case -EIO:
default:
error_type = "I/O";
break;
}
printk(KERN_ERR "end_request: %s error, dev %s, sector %llu\n",
error_type, req->rq_disk ? req->rq_disk->disk_name : "?",
(unsigned long long)blk_rq_pos(req));
}
blk_account_io_completion(req, nr_bytes);
total_bytes = bio_nbytes = 0;
while ((bio = req->bio) != NULL) {
int nbytes;
if (nr_bytes >= bio->bi_size) {
req->bio = bio->bi_next;
nbytes = bio->bi_size;
req_bio_endio(req, bio, nbytes, error);
next_idx = 0;
bio_nbytes = 0;
} else {
int idx = bio->bi_idx + next_idx;
if (unlikely(idx >= bio->bi_vcnt)) {
blk_dump_rq_flags(req, "__end_that");
printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
__func__, idx, bio->bi_vcnt);
break;
}
nbytes = bio_iovec_idx(bio, idx)->bv_len;
BIO_BUG_ON(nbytes > bio->bi_size);
/*
* not a complete bvec done
*/
if (unlikely(nbytes > nr_bytes)) {
bio_nbytes += nr_bytes;
total_bytes += nr_bytes;
break;
}
/*
* advance to the next vector
*/
next_idx++;
bio_nbytes += nbytes;
}
total_bytes += nbytes;
nr_bytes -= nbytes;
bio = req->bio;
if (bio) {
/*
* end more in this run, or just return 'not-done'
*/
if (unlikely(nr_bytes <= 0))
break;
}
}
/*
* completely done
*/
if (!req->bio) {
/*
* Reset counters so that the request stacking driver
* can find how many bytes remain in the request
* later.
*/
req->__data_len = 0;
return false;
}
/*
* if the request wasn't completed, update state
*/
if (bio_nbytes) {
req_bio_endio(req, bio, bio_nbytes, error);
bio->bi_idx += next_idx;
bio_iovec(bio)->bv_offset += nr_bytes;
bio_iovec(bio)->bv_len -= nr_bytes;
}
req->__data_len -= total_bytes;
req->buffer = bio_data(req->bio);
/* update sector only for requests with clear definition of sector */
if (req->cmd_type == REQ_TYPE_FS || (req->cmd_flags & REQ_DISCARD))
req->__sector += total_bytes >> 9;
/* mixed attributes always follow the first bio */
if (req->cmd_flags & REQ_MIXED_MERGE) {
req->cmd_flags &= ~REQ_FAILFAST_MASK;
req->cmd_flags |= req->bio->bi_rw & REQ_FAILFAST_MASK;
}
/*
* If total number of sectors is less than the first segment
* size, something has gone terribly wrong.
*/
if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
blk_dump_rq_flags(req, "request botched");
req->__data_len = blk_rq_cur_bytes(req);
}
/* recalculate the number of segments */
blk_recalc_rq_segments(req);
return true;
}
EXPORT_SYMBOL_GPL(blk_update_request);
static bool blk_update_bidi_request(struct request *rq, int error,
unsigned int nr_bytes,
unsigned int bidi_bytes)
{
if (blk_update_request(rq, error, nr_bytes))
return true;
/* Bidi request must be completed as a whole */
if (unlikely(blk_bidi_rq(rq)) &&
blk_update_request(rq->next_rq, error, bidi_bytes))
return true;
if (blk_queue_add_random(rq->q))
add_disk_randomness(rq->rq_disk);
return false;
}
/**
* blk_unprep_request - unprepare a request
* @req: the request
*
* This function makes a request ready for complete resubmission (or
* completion). It happens only after all error handling is complete,
* so represents the appropriate moment to deallocate any resources
* that were allocated to the request in the prep_rq_fn. The queue
* lock is held when calling this.
*/
void blk_unprep_request(struct request *req)
{
struct request_queue *q = req->q;
req->cmd_flags &= ~REQ_DONTPREP;
if (q->unprep_rq_fn)
q->unprep_rq_fn(q, req);
}
EXPORT_SYMBOL_GPL(blk_unprep_request);
/*
* queue lock must be held
*/
static void blk_finish_request(struct request *req, int error)
{
if (blk_rq_tagged(req))
blk_queue_end_tag(req->q, req);
BUG_ON(blk_queued_rq(req));
if (unlikely(laptop_mode) && req->cmd_type == REQ_TYPE_FS)
laptop_io_completion(&req->q->backing_dev_info);
blk_delete_timer(req);
if (req->cmd_flags & REQ_DONTPREP)
blk_unprep_request(req);
blk_account_io_done(req);
if (req->end_io)
req->end_io(req, error);
else {
if (blk_bidi_rq(req))
__blk_put_request(req->next_rq->q, req->next_rq);
__blk_put_request(req->q, req);
}
}
/**
* blk_end_bidi_request - Complete a bidi request
* @rq: the request to complete
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete @rq
* @bidi_bytes: number of bytes to complete @rq->next_rq
*
* Description:
* Ends I/O on a number of bytes attached to @rq and @rq->next_rq.
* Drivers that supports bidi can safely call this member for any
* type of request, bidi or uni. In the later case @bidi_bytes is
* just ignored.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
static bool blk_end_bidi_request(struct request *rq, int error,
unsigned int nr_bytes, unsigned int bidi_bytes)
{
struct request_queue *q = rq->q;
unsigned long flags;
if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
return true;
spin_lock_irqsave(q->queue_lock, flags);
blk_finish_request(rq, error);
spin_unlock_irqrestore(q->queue_lock, flags);
return false;
}
/**
* __blk_end_bidi_request - Complete a bidi request with queue lock held
* @rq: the request to complete
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete @rq
* @bidi_bytes: number of bytes to complete @rq->next_rq
*
* Description:
* Identical to blk_end_bidi_request() except that queue lock is
* assumed to be locked on entry and remains so on return.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
bool __blk_end_bidi_request(struct request *rq, int error,
unsigned int nr_bytes, unsigned int bidi_bytes)
{
if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
return true;
blk_finish_request(rq, error);
return false;
}
/**
* blk_end_request - Helper function for drivers to complete the request.
* @rq: the request being processed
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete
*
* Description:
* Ends I/O on a number of bytes attached to @rq.
* If @rq has leftover, sets it up for the next range of segments.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
{
return blk_end_bidi_request(rq, error, nr_bytes, 0);
}
EXPORT_SYMBOL(blk_end_request);
/**
* blk_end_request_all - Helper function for drives to finish the request.
* @rq: the request to finish
* @error: %0 for success, < %0 for error
*
* Description:
* Completely finish @rq.
*/
void blk_end_request_all(struct request *rq, int error)
{
bool pending;
unsigned int bidi_bytes = 0;
if (unlikely(blk_bidi_rq(rq)))
bidi_bytes = blk_rq_bytes(rq->next_rq);
pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
EXPORT_SYMBOL(blk_end_request_all);
/**
* blk_end_request_cur - Helper function to finish the current request chunk.
* @rq: the request to finish the current chunk for
* @error: %0 for success, < %0 for error
*
* Description:
* Complete the current consecutively mapped chunk from @rq.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool blk_end_request_cur(struct request *rq, int error)
{
return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
EXPORT_SYMBOL(blk_end_request_cur);
/**
* blk_end_request_err - Finish a request till the next failure boundary.
* @rq: the request to finish till the next failure boundary for
* @error: must be negative errno
*
* Description:
* Complete @rq till the next failure boundary.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool blk_end_request_err(struct request *rq, int error)
{
WARN_ON(error >= 0);
return blk_end_request(rq, error, blk_rq_err_bytes(rq));
}
EXPORT_SYMBOL_GPL(blk_end_request_err);
/**
* __blk_end_request - Helper function for drivers to complete the request.
* @rq: the request being processed
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete
*
* Description:
* Must be called with queue lock held unlike blk_end_request().
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
{
return __blk_end_bidi_request(rq, error, nr_bytes, 0);
}
EXPORT_SYMBOL(__blk_end_request);
/**
* __blk_end_request_all - Helper function for drives to finish the request.
* @rq: the request to finish
* @error: %0 for success, < %0 for error
*
* Description:
* Completely finish @rq. Must be called with queue lock held.
*/
void __blk_end_request_all(struct request *rq, int error)
{
bool pending;
unsigned int bidi_bytes = 0;
if (unlikely(blk_bidi_rq(rq)))
bidi_bytes = blk_rq_bytes(rq->next_rq);
pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
EXPORT_SYMBOL(__blk_end_request_all);
/**
* __blk_end_request_cur - Helper function to finish the current request chunk.
* @rq: the request to finish the current chunk for
* @error: %0 for success, < %0 for error
*
* Description:
* Complete the current consecutively mapped chunk from @rq. Must
* be called with queue lock held.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool __blk_end_request_cur(struct request *rq, int error)
{
return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
EXPORT_SYMBOL(__blk_end_request_cur);
/**
* __blk_end_request_err - Finish a request till the next failure boundary.
* @rq: the request to finish till the next failure boundary for
* @error: must be negative errno
*
* Description:
* Complete @rq till the next failure boundary. Must be called
* with queue lock held.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool __blk_end_request_err(struct request *rq, int error)
{
WARN_ON(error >= 0);
return __blk_end_request(rq, error, blk_rq_err_bytes(rq));
}
EXPORT_SYMBOL_GPL(__blk_end_request_err);
void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
struct bio *bio)
{
/* Bit 0 (R/W) is identical in rq->cmd_flags and bio->bi_rw */
rq->cmd_flags |= bio->bi_rw & REQ_WRITE;
if (bio_has_data(bio)) {
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->buffer = bio_data(bio);
}
rq->__data_len = bio->bi_size;
rq->bio = rq->biotail = bio;
if (bio->bi_bdev)
rq->rq_disk = bio->bi_bdev->bd_disk;
}
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
/**
* rq_flush_dcache_pages - Helper function to flush all pages in a request
* @rq: the request to be flushed
*
* Description:
* Flush all pages in @rq.
*/
void rq_flush_dcache_pages(struct request *rq)
{
struct req_iterator iter;
struct bio_vec *bvec;
rq_for_each_segment(bvec, rq, iter)
flush_dcache_page(bvec->bv_page);
}
EXPORT_SYMBOL_GPL(rq_flush_dcache_pages);
#endif
/**
* blk_lld_busy - Check if underlying low-level drivers of a device are busy
* @q : the queue of the device being checked
*
* Description:
* Check if underlying low-level drivers of a device are busy.
* If the drivers want to export their busy state, they must set own
* exporting function using blk_queue_lld_busy() first.
*
* Basically, this function is used only by request stacking drivers
* to stop dispatching requests to underlying devices when underlying
* devices are busy. This behavior helps more I/O merging on the queue
* of the request stacking driver and prevents I/O throughput regression
* on burst I/O load.
*
* Return:
* 0 - Not busy (The request stacking driver should dispatch request)
* 1 - Busy (The request stacking driver should stop dispatching request)
*/
int blk_lld_busy(struct request_queue *q)
{
if (q->lld_busy_fn)
return q->lld_busy_fn(q);
return 0;
}
EXPORT_SYMBOL_GPL(blk_lld_busy);
/**
* blk_rq_unprep_clone - Helper function to free all bios in a cloned request
* @rq: the clone request to be cleaned up
*
* Description:
* Free all bios in @rq for a cloned request.
*/
void blk_rq_unprep_clone(struct request *rq)
{
struct bio *bio;
while ((bio = rq->bio) != NULL) {
rq->bio = bio->bi_next;
bio_put(bio);
}
}
EXPORT_SYMBOL_GPL(blk_rq_unprep_clone);
/*
* Copy attributes of the original request to the clone request.
* The actual data parts (e.g. ->cmd, ->buffer, ->sense) are not copied.
*/
static void __blk_rq_prep_clone(struct request *dst, struct request *src)
{
dst->cpu = src->cpu;
dst->cmd_flags = (src->cmd_flags & REQ_CLONE_MASK) | REQ_NOMERGE;
dst->cmd_type = src->cmd_type;
dst->__sector = blk_rq_pos(src);
dst->__data_len = blk_rq_bytes(src);
dst->nr_phys_segments = src->nr_phys_segments;
dst->ioprio = src->ioprio;
dst->extra_len = src->extra_len;
}
/**
* blk_rq_prep_clone - Helper function to setup clone request
* @rq: the request to be setup
* @rq_src: original request to be cloned
* @bs: bio_set that bios for clone are allocated from
* @gfp_mask: memory allocation mask for bio
* @bio_ctr: setup function to be called for each clone bio.
* Returns %0 for success, non %0 for failure.
* @data: private data to be passed to @bio_ctr
*
* Description:
* Clones bios in @rq_src to @rq, and copies attributes of @rq_src to @rq.
* The actual data parts of @rq_src (e.g. ->cmd, ->buffer, ->sense)
* are not copied, and copying such parts is the caller's responsibility.
* Also, pages which the original bios are pointing to are not copied
* and the cloned bios just point same pages.
* So cloned bios must be completed before original bios, which means
* the caller must complete @rq before @rq_src.
*/
int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
struct bio_set *bs, gfp_t gfp_mask,
int (*bio_ctr)(struct bio *, struct bio *, void *),
void *data)
{
struct bio *bio, *bio_src;
if (!bs)
bs = fs_bio_set;
blk_rq_init(NULL, rq);
__rq_for_each_bio(bio_src, rq_src) {
bio = bio_alloc_bioset(gfp_mask, bio_src->bi_max_vecs, bs);
if (!bio)
goto free_and_out;
__bio_clone(bio, bio_src);
if (bio_integrity(bio_src) &&
bio_integrity_clone(bio, bio_src, gfp_mask, bs))
goto free_and_out;
if (bio_ctr && bio_ctr(bio, bio_src, data))
goto free_and_out;
if (rq->bio) {
rq->biotail->bi_next = bio;
rq->biotail = bio;
} else
rq->bio = rq->biotail = bio;
}
__blk_rq_prep_clone(rq, rq_src);
return 0;
free_and_out:
if (bio)
bio_free(bio, bs);
blk_rq_unprep_clone(rq);
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(blk_rq_prep_clone);
int kblockd_schedule_work(struct request_queue *q, struct work_struct *work)
{
return queue_work(kblockd_workqueue, work);
}
EXPORT_SYMBOL(kblockd_schedule_work);
int kblockd_schedule_delayed_work(struct request_queue *q,
struct delayed_work *dwork, unsigned long delay)
{
return queue_delayed_work(kblockd_workqueue, dwork, delay);
}
EXPORT_SYMBOL(kblockd_schedule_delayed_work);
#define PLUG_MAGIC 0x91827364
void blk_start_plug(struct blk_plug *plug)
{
struct task_struct *tsk = current;
plug->magic = PLUG_MAGIC;
INIT_LIST_HEAD(&plug->list);
INIT_LIST_HEAD(&plug->cb_list);
plug->should_sort = 0;
/*
* If this is a nested plug, don't actually assign it. It will be
* flushed on its own.
*/
if (!tsk->plug) {
/*
* Store ordering should not be needed here, since a potential
* preempt will imply a full memory barrier
*/
tsk->plug = plug;
}
}
EXPORT_SYMBOL(blk_start_plug);
static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b)
{
struct request *rqa = container_of(a, struct request, queuelist);
struct request *rqb = container_of(b, struct request, queuelist);
return !(rqa->q <= rqb->q);
}
/*
* If 'from_schedule' is true, then postpone the dispatch of requests
* until a safe kblockd context. We due this to avoid accidental big
* additional stack usage in driver dispatch, in places where the originally
* plugger did not intend it.
*/
static void queue_unplugged(struct request_queue *q, unsigned int depth,
bool from_schedule)
__releases(q->queue_lock)
{
trace_block_unplug(q, depth, !from_schedule);
/*
* If we are punting this to kblockd, then we can safely drop
* the queue_lock before waking kblockd (which needs to take
* this lock).
*/
if (from_schedule) {
spin_unlock(q->queue_lock);
blk_run_queue_async(q);
} else {
__blk_run_queue(q);
spin_unlock(q->queue_lock);
}
}
static void flush_plug_callbacks(struct blk_plug *plug)
{
LIST_HEAD(callbacks);
if (list_empty(&plug->cb_list))
return;
list_splice_init(&plug->cb_list, &callbacks);
while (!list_empty(&callbacks)) {
struct blk_plug_cb *cb = list_first_entry(&callbacks,
struct blk_plug_cb,
list);
list_del(&cb->list);
cb->callback(cb);
}
}
void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule)
{
struct request_queue *q;
unsigned long flags;
struct request *rq;
LIST_HEAD(list);
unsigned int depth;
BUG_ON(plug->magic != PLUG_MAGIC);
flush_plug_callbacks(plug);
if (list_empty(&plug->list))
return;
list_splice_init(&plug->list, &list);
if (plug->should_sort) {
list_sort(NULL, &list, plug_rq_cmp);
plug->should_sort = 0;
}
q = NULL;
depth = 0;
/*
* Save and disable interrupts here, to avoid doing it for every
* queue lock we have to take.
*/
local_irq_save(flags);
while (!list_empty(&list)) {
rq = list_entry_rq(list.next);
list_del_init(&rq->queuelist);
BUG_ON(!rq->q);
if (rq->q != q) {
/*
* This drops the queue lock
*/
if (q)
queue_unplugged(q, depth, from_schedule);
q = rq->q;
depth = 0;
spin_lock(q->queue_lock);
}
/*
* rq is already accounted, so use raw insert
*/
if (rq->cmd_flags & (REQ_FLUSH | REQ_FUA))
__elv_add_request(q, rq, ELEVATOR_INSERT_FLUSH);
else
__elv_add_request(q, rq, ELEVATOR_INSERT_SORT_MERGE);
depth++;
}
/*
* This drops the queue lock
*/
if (q)
queue_unplugged(q, depth, from_schedule);
local_irq_restore(flags);
}
void blk_finish_plug(struct blk_plug *plug)
{
blk_flush_plug_list(plug, false);
if (plug == current->plug)
current->plug = NULL;
}
EXPORT_SYMBOL(blk_finish_plug);
int __init blk_dev_init(void)
{
BUILD_BUG_ON(__REQ_NR_BITS > 8 *
sizeof(((struct request *)0)->cmd_flags));
/* used for unplugging and affects IO latency/throughput - HIGHPRI */
kblockd_workqueue = alloc_workqueue("kblockd",
WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
if (!kblockd_workqueue)
panic("Failed to create kblockd\n");
request_cachep = kmem_cache_create("blkdev_requests",
sizeof(struct request), 0, SLAB_PANIC, NULL);
blk_requestq_cachep = kmem_cache_create("blkdev_queue",
sizeof(struct request_queue), 0, SLAB_PANIC, NULL);
return 0;
}