mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
ba2a2c378a
These drivers don't use the driver_data member of struct i2c_device_id, so don't explicitly initialize this member. This prepares putting driver_data in an anonymous union which requires either no initialization or named designators. But it's also a nice cleanup on its own. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20240502074722.1103986-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
225 lines
5.5 KiB
C
225 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for the 1250-EV1 audio I/O module
|
|
*
|
|
* Copyright 2011 Wolfson Microelectronics plc
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio/consumer.h>
|
|
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
|
|
struct wm1250_priv {
|
|
struct gpio_desc *clk_ena;
|
|
struct gpio_desc *clk_sel0;
|
|
struct gpio_desc *clk_sel1;
|
|
struct gpio_desc *osr;
|
|
struct gpio_desc *master;
|
|
};
|
|
|
|
static int wm1250_ev1_set_bias_level(struct snd_soc_component *component,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
struct wm1250_priv *wm1250 = dev_get_drvdata(component->dev);
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_PREPARE:
|
|
break;
|
|
|
|
case SND_SOC_BIAS_STANDBY:
|
|
gpiod_set_value_cansleep(wm1250->clk_ena, 1);
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
gpiod_set_value_cansleep(wm1250->clk_ena, 0);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = {
|
|
SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0),
|
|
|
|
SND_SOC_DAPM_INPUT("WM1250 Input"),
|
|
SND_SOC_DAPM_OUTPUT("WM1250 Output"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = {
|
|
{ "ADC", NULL, "WM1250 Input" },
|
|
{ "WM1250 Output", NULL, "DAC" },
|
|
};
|
|
|
|
static int wm1250_ev1_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct wm1250_priv *wm1250 = snd_soc_component_get_drvdata(dai->component);
|
|
|
|
switch (params_rate(params)) {
|
|
case 8000:
|
|
gpiod_set_value(wm1250->clk_sel0, 1);
|
|
gpiod_set_value(wm1250->clk_sel1, 1);
|
|
break;
|
|
case 16000:
|
|
gpiod_set_value(wm1250->clk_sel0, 0);
|
|
gpiod_set_value(wm1250->clk_sel1, 1);
|
|
break;
|
|
case 32000:
|
|
gpiod_set_value(wm1250->clk_sel0, 1);
|
|
gpiod_set_value(wm1250->clk_sel1, 0);
|
|
break;
|
|
case 64000:
|
|
gpiod_set_value(wm1250->clk_sel0, 0);
|
|
gpiod_set_value(wm1250->clk_sel1, 0);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops wm1250_ev1_ops = {
|
|
.hw_params = wm1250_ev1_hw_params,
|
|
};
|
|
|
|
#define WM1250_EV1_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\
|
|
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_64000)
|
|
|
|
static struct snd_soc_dai_driver wm1250_ev1_dai = {
|
|
.name = "wm1250-ev1",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM1250_EV1_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.capture = {
|
|
.stream_name = "Capture",
|
|
.channels_min = 1,
|
|
.channels_max = 2,
|
|
.rates = WM1250_EV1_RATES,
|
|
.formats = SNDRV_PCM_FMTBIT_S16_LE,
|
|
},
|
|
.ops = &wm1250_ev1_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver soc_component_dev_wm1250_ev1 = {
|
|
.dapm_widgets = wm1250_ev1_dapm_widgets,
|
|
.num_dapm_widgets = ARRAY_SIZE(wm1250_ev1_dapm_widgets),
|
|
.dapm_routes = wm1250_ev1_dapm_routes,
|
|
.num_dapm_routes = ARRAY_SIZE(wm1250_ev1_dapm_routes),
|
|
.set_bias_level = wm1250_ev1_set_bias_level,
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
};
|
|
|
|
static int wm1250_ev1_pdata(struct i2c_client *i2c)
|
|
{
|
|
struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev);
|
|
struct wm1250_priv *wm1250;
|
|
|
|
if (!pdata)
|
|
return 0;
|
|
|
|
wm1250 = devm_kzalloc(&i2c->dev, sizeof(*wm1250), GFP_KERNEL);
|
|
if (!wm1250)
|
|
return -ENOMEM;
|
|
|
|
wm1250->clk_ena = devm_gpiod_get(&i2c->dev, "clk-ena", GPIOD_OUT_LOW);
|
|
if (IS_ERR(wm1250->clk_ena))
|
|
return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_ena),
|
|
"failed to get clock enable GPIO\n");
|
|
|
|
wm1250->clk_sel0 = devm_gpiod_get(&i2c->dev, "clk-sel0", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(wm1250->clk_sel0))
|
|
return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_sel0),
|
|
"failed to get clock sel0 GPIO\n");
|
|
|
|
wm1250->clk_sel1 = devm_gpiod_get(&i2c->dev, "clk-sel1", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(wm1250->clk_sel1))
|
|
return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->clk_sel1),
|
|
"failed to get clock sel1 GPIO\n");
|
|
|
|
wm1250->osr = devm_gpiod_get(&i2c->dev, "osr", GPIOD_OUT_LOW);
|
|
if (IS_ERR(wm1250->osr))
|
|
return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->osr),
|
|
"failed to get OSR GPIO\n");
|
|
|
|
wm1250->master = devm_gpiod_get(&i2c->dev, "master", GPIOD_OUT_LOW);
|
|
if (IS_ERR(wm1250->master))
|
|
return dev_err_probe(&i2c->dev, PTR_ERR(wm1250->master),
|
|
"failed to get MASTER GPIO\n");
|
|
|
|
dev_set_drvdata(&i2c->dev, wm1250);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm1250_ev1_probe(struct i2c_client *i2c)
|
|
{
|
|
int id, board, rev, ret;
|
|
|
|
dev_set_drvdata(&i2c->dev, NULL);
|
|
|
|
board = i2c_smbus_read_byte_data(i2c, 0);
|
|
if (board < 0) {
|
|
dev_err(&i2c->dev, "Failed to read ID: %d\n", board);
|
|
return board;
|
|
}
|
|
|
|
id = (board & 0xfe) >> 2;
|
|
rev = board & 0x3;
|
|
|
|
if (id != 1) {
|
|
dev_err(&i2c->dev, "Unknown board ID %d\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(&i2c->dev, "revision %d\n", rev + 1);
|
|
|
|
ret = wm1250_ev1_pdata(i2c);
|
|
if (ret != 0)
|
|
return ret;
|
|
|
|
ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_wm1250_ev1,
|
|
&wm1250_ev1_dai, 1);
|
|
if (ret != 0) {
|
|
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm1250_ev1_i2c_id[] = {
|
|
{ "wm1250-ev1" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id);
|
|
|
|
static struct i2c_driver wm1250_ev1_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm1250-ev1",
|
|
},
|
|
.probe = wm1250_ev1_probe,
|
|
.id_table = wm1250_ev1_i2c_id,
|
|
};
|
|
|
|
module_i2c_driver(wm1250_ev1_i2c_driver);
|
|
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_DESCRIPTION("WM1250-EV1 audio I/O module driver");
|
|
MODULE_LICENSE("GPL");
|