mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
7912a6391f
It was a clam development cycle. There were an ALSA core extension for subformat PCM bits and a few ASoC core changes to support N:M mappings, while the most of remaining changes are driver-specific. Core: - API extensions for properly limiting PCM format bits via subformat - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2 ASoC: - Lots of SOF updates: fallback support to older IPC versions, notification on control changes with IPC4. Also supports for ACPI parse for the ES83xx driver that reduces quirks. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases) - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100 - Drop of Freescale MPC8610 code that is no longer supported HD-audio: - More CS35L41 codec extensions for Dell, HP and Lenovo models - TAS2781 codec extensions for Lenovo and co - New PCM subformat supports Others: - More enhancement for Scarlett2 USB mixer support - Various kselftest fixes -----BEGIN PGP SIGNATURE----- iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmWfzJgOHHRpd2FpQHN1 c2UuZGUACgkQLtJE4w1nLE/NHg//VT0JRZDKqAZMUIaFZswUIKgoUy9fY9WaePO+ db38uFzjuTC1ZN1PIDFnU0bQ2uL7IYF/xnceqitk+G76+Wt/pcDP/1hX+F9UhsVd wgRrihBeNRtSmPku8cwKu+duD/46439JyWo34PdHm8FxNoyilBx6fIApk6JqB57V HYU3ZFtQE84s8TmPHefasLeewY5thFtWYXLAaEZR5oohyXUTN0Np7h7vG8nchh1F zZOwoQ+nBo607PwUoXd0BFYkcuXwHlK4vLVmAM05KPaH1Q/kesEecYMhIVbnDHOj a4caMz+/tMbNbw3/GRsg8HgIeiyp1NoyC4LAqufa+Pj6BgPREVra5j8XoxAnCxXr 8X8EDtBds6frMzqtQyNvTkyRCf3Iki8fhz60Re5nEkoXLcv34E3kleQDLG/FnHqC qeH0J3FEed84Gf6KrnpjkPHLFRx5ZKyahOHZ7Xc76fUYMCwvczkc5CKeG2EoivE4 koEkhlQU1gnNyjNTTi4JchWis+EZG/oNA91eud1lMDm320lFJmxdZ5z31xZubVvs WTcMStgHCDPIKOeSBuwBCYFwugMtV/o/ejE567E4bxVC5ZA/zbxyvpxU9iDAjUNK T0JdPf/KKy1YJiNe9xuJn9/1ZpV6BXFCl7b7wILV+ZbGduOczoMCEH5T7dwAmZqq /lQtT/8= =yVxc -----END PGP SIGNATURE----- Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It was a calm development cycle. There were an ALSA core extension for subformat PCM bits and a few ASoC core changes to support N:M mappings, while the most of remaining changes are driver-specific. Core: - API extensions for properly limiting PCM format bits via subformat - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2 ASoC: - Lots of SOF updates: fallback support to older IPC versions, notification on control changes with IPC4. Also supports for ACPI parse for the ES83xx driver that reduces quirks. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases) - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100 - Drop of Freescale MPC8610 code that is no longer supported HD-audio: - More CS35L41 codec extensions for Dell, HP and Lenovo models - TAS2781 codec extensions for Lenovo and co - New PCM subformat supports Others: - More enhancement for Scarlett2 USB mixer support - Various kselftest fixes" * tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits) kselftest/alsa - conf: Stringify the printed errno in sysfs_get() kselftest/alsa - mixer-test: Fix the print format specifier warning kselftest/alsa - mixer-test: Fix the print format specifier warning kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg() ALSA: hda/tas2781: annotate calibration data endianness ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140 ALSA: ac97: fix build regression ALSA: hda: cs35l41: Support more HP models without _DSD ALSA: hda/tas2781: add fixup for Lenovo 14ARB7 ALSA: hda/tas2781: add TAS2563 support for 14ARB7 ALSA: hda/tas2781: add configurable global i2c address ALSA: hda/tas2781: add ptrs to calibration functions ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie ALSA: hda/tas2781: configure the amp after firmware load ALSA: mark all struct bus_type as const ASoC: pxa: sspa: Don't select SND_ARM ASoC: rt5663: cancel the work when system suspends ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4 ...
2350 lines
58 KiB
C
2350 lines
58 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* hdac_hdmi.c - ASoc HDA-HDMI codec driver for Intel platforms
|
|
*
|
|
* Copyright (C) 2014-2015 Intel Corp
|
|
* Author: Samreen Nilofer <samreen.nilofer@intel.com>
|
|
* Subhransu S. Prusty <subhransu.s.prusty@intel.com>
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
*
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/hdmi.h>
|
|
#include <drm/drm_edid.h>
|
|
#include <drm/drm_eld.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/jack.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/hdaudio_ext.h>
|
|
#include <sound/hda_i915.h>
|
|
#include <sound/pcm_drm_eld.h>
|
|
#include <sound/hda_chmap.h>
|
|
#include "../../hda/local.h"
|
|
#include "hdac_hdmi.h"
|
|
|
|
#define NAME_SIZE 32
|
|
|
|
#define AMP_OUT_MUTE 0xb080
|
|
#define AMP_OUT_UNMUTE 0xb000
|
|
#define PIN_OUT (AC_PINCTL_OUT_EN)
|
|
|
|
#define HDA_MAX_CONNECTIONS 32
|
|
|
|
#define HDA_MAX_CVTS 3
|
|
#define HDA_MAX_PORTS 3
|
|
|
|
#define ELD_MAX_SIZE 256
|
|
#define ELD_FIXED_BYTES 20
|
|
|
|
#define ELD_VER_CEA_861D 2
|
|
#define ELD_VER_PARTIAL 31
|
|
#define ELD_MAX_MNL 16
|
|
|
|
struct hdac_hdmi_cvt_params {
|
|
unsigned int channels_min;
|
|
unsigned int channels_max;
|
|
u32 rates;
|
|
u64 formats;
|
|
unsigned int maxbps;
|
|
};
|
|
|
|
struct hdac_hdmi_cvt {
|
|
struct list_head head;
|
|
hda_nid_t nid;
|
|
const char *name;
|
|
struct hdac_hdmi_cvt_params params;
|
|
};
|
|
|
|
/* Currently only spk_alloc, more to be added */
|
|
struct hdac_hdmi_parsed_eld {
|
|
u8 spk_alloc;
|
|
};
|
|
|
|
struct hdac_hdmi_eld {
|
|
bool monitor_present;
|
|
bool eld_valid;
|
|
int eld_size;
|
|
char eld_buffer[ELD_MAX_SIZE];
|
|
struct hdac_hdmi_parsed_eld info;
|
|
};
|
|
|
|
struct hdac_hdmi_pin {
|
|
struct list_head head;
|
|
hda_nid_t nid;
|
|
bool mst_capable;
|
|
struct hdac_hdmi_port *ports;
|
|
int num_ports;
|
|
struct hdac_device *hdev;
|
|
};
|
|
|
|
struct hdac_hdmi_port {
|
|
struct list_head head;
|
|
int id;
|
|
struct hdac_hdmi_pin *pin;
|
|
int num_mux_nids;
|
|
hda_nid_t mux_nids[HDA_MAX_CONNECTIONS];
|
|
struct hdac_hdmi_eld eld;
|
|
const char *jack_pin;
|
|
bool is_connect;
|
|
struct snd_soc_dapm_context *dapm;
|
|
const char *output_pin;
|
|
struct work_struct dapm_work;
|
|
};
|
|
|
|
struct hdac_hdmi_pcm {
|
|
struct list_head head;
|
|
int pcm_id;
|
|
struct list_head port_list;
|
|
struct hdac_hdmi_cvt *cvt;
|
|
struct snd_soc_jack *jack;
|
|
int stream_tag;
|
|
int channels;
|
|
int format;
|
|
bool chmap_set;
|
|
unsigned char chmap[8]; /* ALSA API channel-map */
|
|
struct mutex lock;
|
|
int jack_event;
|
|
struct snd_kcontrol *eld_ctl;
|
|
};
|
|
|
|
struct hdac_hdmi_dai_port_map {
|
|
int dai_id;
|
|
struct hdac_hdmi_port *port;
|
|
struct hdac_hdmi_cvt *cvt;
|
|
};
|
|
|
|
struct hdac_hdmi_drv_data {
|
|
unsigned int vendor_nid;
|
|
};
|
|
|
|
struct hdac_hdmi_priv {
|
|
struct hdac_device *hdev;
|
|
struct snd_soc_component *component;
|
|
struct snd_card *card;
|
|
struct hdac_hdmi_dai_port_map dai_map[HDA_MAX_CVTS];
|
|
struct list_head pin_list;
|
|
struct list_head cvt_list;
|
|
struct list_head pcm_list;
|
|
int num_pin;
|
|
int num_cvt;
|
|
int num_ports;
|
|
struct mutex pin_mutex;
|
|
struct hdac_chmap chmap;
|
|
struct hdac_hdmi_drv_data *drv_data;
|
|
struct snd_soc_dai_driver *dai_drv;
|
|
};
|
|
|
|
#define hdev_to_hdmi_priv(_hdev) dev_get_drvdata(&(_hdev)->dev)
|
|
|
|
static struct hdac_hdmi_pcm *
|
|
hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi,
|
|
struct hdac_hdmi_cvt *cvt)
|
|
{
|
|
struct hdac_hdmi_pcm *pcm;
|
|
|
|
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
|
|
if (pcm->cvt == cvt)
|
|
return pcm;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm,
|
|
struct hdac_hdmi_port *port, bool is_connect)
|
|
{
|
|
struct hdac_device *hdev = port->pin->hdev;
|
|
|
|
port->is_connect = is_connect;
|
|
if (is_connect) {
|
|
/*
|
|
* Report Jack connect event when a device is connected
|
|
* for the first time where same PCM is attached to multiple
|
|
* ports.
|
|
*/
|
|
if (pcm->jack_event == 0) {
|
|
dev_dbg(&hdev->dev,
|
|
"jack report for pcm=%d\n",
|
|
pcm->pcm_id);
|
|
snd_soc_jack_report(pcm->jack, SND_JACK_AVOUT,
|
|
SND_JACK_AVOUT);
|
|
}
|
|
pcm->jack_event++;
|
|
} else {
|
|
/*
|
|
* Report Jack disconnect event when a device is disconnected
|
|
* is the only last connected device when same PCM is attached
|
|
* to multiple ports.
|
|
*/
|
|
if (pcm->jack_event == 1)
|
|
snd_soc_jack_report(pcm->jack, 0, SND_JACK_AVOUT);
|
|
if (pcm->jack_event > 0)
|
|
pcm->jack_event--;
|
|
}
|
|
}
|
|
|
|
static void hdac_hdmi_port_dapm_update(struct hdac_hdmi_port *port)
|
|
{
|
|
if (port->is_connect)
|
|
snd_soc_dapm_enable_pin(port->dapm, port->jack_pin);
|
|
else
|
|
snd_soc_dapm_disable_pin(port->dapm, port->jack_pin);
|
|
snd_soc_dapm_sync(port->dapm);
|
|
}
|
|
|
|
static void hdac_hdmi_jack_dapm_work(struct work_struct *work)
|
|
{
|
|
struct hdac_hdmi_port *port;
|
|
|
|
port = container_of(work, struct hdac_hdmi_port, dapm_work);
|
|
hdac_hdmi_port_dapm_update(port);
|
|
}
|
|
|
|
static void hdac_hdmi_jack_report_sync(struct hdac_hdmi_pcm *pcm,
|
|
struct hdac_hdmi_port *port, bool is_connect)
|
|
{
|
|
hdac_hdmi_jack_report(pcm, port, is_connect);
|
|
hdac_hdmi_port_dapm_update(port);
|
|
}
|
|
|
|
/* MST supported verbs */
|
|
/*
|
|
* Get the no devices that can be connected to a port on the Pin widget.
|
|
*/
|
|
static int hdac_hdmi_get_port_len(struct hdac_device *hdev, hda_nid_t nid)
|
|
{
|
|
unsigned int caps;
|
|
unsigned int type, param;
|
|
|
|
caps = get_wcaps(hdev, nid);
|
|
type = get_wcaps_type(caps);
|
|
|
|
if (!(caps & AC_WCAP_DIGITAL) || (type != AC_WID_PIN))
|
|
return 0;
|
|
|
|
param = snd_hdac_read_parm_uncached(hdev, nid, AC_PAR_DEVLIST_LEN);
|
|
if (param == -1)
|
|
return param;
|
|
|
|
return param & AC_DEV_LIST_LEN_MASK;
|
|
}
|
|
|
|
/*
|
|
* Get the port entry select on the pin. Return the port entry
|
|
* id selected on the pin. Return 0 means the first port entry
|
|
* is selected or MST is not supported.
|
|
*/
|
|
static int hdac_hdmi_port_select_get(struct hdac_device *hdev,
|
|
struct hdac_hdmi_port *port)
|
|
{
|
|
return snd_hdac_codec_read(hdev, port->pin->nid,
|
|
0, AC_VERB_GET_DEVICE_SEL, 0);
|
|
}
|
|
|
|
/*
|
|
* Sets the selected port entry for the configuring Pin widget verb.
|
|
* returns error if port set is not equal to port get otherwise success
|
|
*/
|
|
static int hdac_hdmi_port_select_set(struct hdac_device *hdev,
|
|
struct hdac_hdmi_port *port)
|
|
{
|
|
int num_ports;
|
|
|
|
if (!port->pin->mst_capable)
|
|
return 0;
|
|
|
|
/* AC_PAR_DEVLIST_LEN is 0 based. */
|
|
num_ports = hdac_hdmi_get_port_len(hdev, port->pin->nid);
|
|
if (num_ports < 0)
|
|
return -EIO;
|
|
/*
|
|
* Device List Length is a 0 based integer value indicating the
|
|
* number of sink device that a MST Pin Widget can support.
|
|
*/
|
|
if (num_ports + 1 < port->id)
|
|
return 0;
|
|
|
|
snd_hdac_codec_write(hdev, port->pin->nid, 0,
|
|
AC_VERB_SET_DEVICE_SEL, port->id);
|
|
|
|
if (port->id != hdac_hdmi_port_select_get(hdev, port))
|
|
return -EIO;
|
|
|
|
dev_dbg(&hdev->dev, "Selected the port=%d\n", port->id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct hdac_hdmi_pcm *get_hdmi_pcm_from_id(struct hdac_hdmi_priv *hdmi,
|
|
int pcm_idx)
|
|
{
|
|
struct hdac_hdmi_pcm *pcm;
|
|
|
|
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
|
|
if (pcm->pcm_id == pcm_idx)
|
|
return pcm;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static unsigned int sad_format(const u8 *sad)
|
|
{
|
|
return ((sad[0] >> 0x3) & 0x1f);
|
|
}
|
|
|
|
static unsigned int sad_sample_bits_lpcm(const u8 *sad)
|
|
{
|
|
return (sad[2] & 7);
|
|
}
|
|
|
|
static int hdac_hdmi_eld_limit_formats(struct snd_pcm_runtime *runtime,
|
|
void *eld)
|
|
{
|
|
u64 formats = SNDRV_PCM_FMTBIT_S16;
|
|
int i;
|
|
const u8 *sad, *eld_buf = eld;
|
|
|
|
sad = drm_eld_sad(eld_buf);
|
|
if (!sad)
|
|
goto format_constraint;
|
|
|
|
for (i = drm_eld_sad_count(eld_buf); i > 0; i--, sad += 3) {
|
|
if (sad_format(sad) == 1) { /* AUDIO_CODING_TYPE_LPCM */
|
|
|
|
/*
|
|
* the controller support 20 and 24 bits in 32 bit
|
|
* container so we set S32
|
|
*/
|
|
if (sad_sample_bits_lpcm(sad) & 0x6)
|
|
formats |= SNDRV_PCM_FMTBIT_S32;
|
|
}
|
|
}
|
|
|
|
format_constraint:
|
|
return snd_pcm_hw_constraint_mask64(runtime, SNDRV_PCM_HW_PARAM_FORMAT,
|
|
formats);
|
|
|
|
}
|
|
|
|
static void
|
|
hdac_hdmi_set_dip_index(struct hdac_device *hdev, hda_nid_t pin_nid,
|
|
int packet_index, int byte_index)
|
|
{
|
|
int val;
|
|
|
|
val = (packet_index << 5) | (byte_index & 0x1f);
|
|
snd_hdac_codec_write(hdev, pin_nid, 0, AC_VERB_SET_HDMI_DIP_INDEX, val);
|
|
}
|
|
|
|
struct dp_audio_infoframe {
|
|
u8 type; /* 0x84 */
|
|
u8 len; /* 0x1b */
|
|
u8 ver; /* 0x11 << 2 */
|
|
|
|
u8 CC02_CT47; /* match with HDMI infoframe from this on */
|
|
u8 SS01_SF24;
|
|
u8 CXT04;
|
|
u8 CA;
|
|
u8 LFEPBL01_LSV36_DM_INH7;
|
|
};
|
|
|
|
static int hdac_hdmi_setup_audio_infoframe(struct hdac_device *hdev,
|
|
struct hdac_hdmi_pcm *pcm, struct hdac_hdmi_port *port)
|
|
{
|
|
uint8_t buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AUDIO_INFOFRAME_SIZE];
|
|
struct hdmi_audio_infoframe frame;
|
|
struct hdac_hdmi_pin *pin = port->pin;
|
|
struct dp_audio_infoframe dp_ai;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_cvt *cvt = pcm->cvt;
|
|
u8 *dip;
|
|
int ret;
|
|
int i;
|
|
const u8 *eld_buf;
|
|
u8 conn_type;
|
|
int channels, ca;
|
|
|
|
ca = snd_hdac_channel_allocation(hdev, port->eld.info.spk_alloc,
|
|
pcm->channels, pcm->chmap_set, true, pcm->chmap);
|
|
|
|
channels = snd_hdac_get_active_channels(ca);
|
|
hdmi->chmap.ops.set_channel_count(hdev, cvt->nid, channels);
|
|
|
|
snd_hdac_setup_channel_mapping(&hdmi->chmap, pin->nid, false, ca,
|
|
pcm->channels, pcm->chmap, pcm->chmap_set);
|
|
|
|
eld_buf = port->eld.eld_buffer;
|
|
conn_type = drm_eld_get_conn_type(eld_buf);
|
|
|
|
switch (conn_type) {
|
|
case DRM_ELD_CONN_TYPE_HDMI:
|
|
hdmi_audio_infoframe_init(&frame);
|
|
|
|
frame.channels = channels;
|
|
frame.channel_allocation = ca;
|
|
|
|
ret = hdmi_audio_infoframe_pack(&frame, buffer, sizeof(buffer));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
break;
|
|
|
|
case DRM_ELD_CONN_TYPE_DP:
|
|
memset(&dp_ai, 0, sizeof(dp_ai));
|
|
dp_ai.type = 0x84;
|
|
dp_ai.len = 0x1b;
|
|
dp_ai.ver = 0x11 << 2;
|
|
dp_ai.CC02_CT47 = channels - 1;
|
|
dp_ai.CA = ca;
|
|
|
|
dip = (u8 *)&dp_ai;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&hdev->dev, "Invalid connection type: %d\n", conn_type);
|
|
return -EIO;
|
|
}
|
|
|
|
/* stop infoframe transmission */
|
|
hdac_hdmi_set_dip_index(hdev, pin->nid, 0x0, 0x0);
|
|
snd_hdac_codec_write(hdev, pin->nid, 0,
|
|
AC_VERB_SET_HDMI_DIP_XMIT, AC_DIPXMIT_DISABLE);
|
|
|
|
|
|
/* Fill infoframe. Index auto-incremented */
|
|
hdac_hdmi_set_dip_index(hdev, pin->nid, 0x0, 0x0);
|
|
if (conn_type == DRM_ELD_CONN_TYPE_HDMI) {
|
|
for (i = 0; i < sizeof(buffer); i++)
|
|
snd_hdac_codec_write(hdev, pin->nid, 0,
|
|
AC_VERB_SET_HDMI_DIP_DATA, buffer[i]);
|
|
} else {
|
|
for (i = 0; i < sizeof(dp_ai); i++)
|
|
snd_hdac_codec_write(hdev, pin->nid, 0,
|
|
AC_VERB_SET_HDMI_DIP_DATA, dip[i]);
|
|
}
|
|
|
|
/* Start infoframe */
|
|
hdac_hdmi_set_dip_index(hdev, pin->nid, 0x0, 0x0);
|
|
snd_hdac_codec_write(hdev, pin->nid, 0,
|
|
AC_VERB_SET_HDMI_DIP_XMIT, AC_DIPXMIT_BEST);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_set_stream(struct snd_soc_dai *dai,
|
|
void *stream, int direction)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_dai_get_drvdata(dai);
|
|
struct hdac_device *hdev = hdmi->hdev;
|
|
struct hdac_hdmi_dai_port_map *dai_map;
|
|
struct hdac_hdmi_pcm *pcm;
|
|
struct hdac_stream *hstream;
|
|
|
|
if (!stream)
|
|
return -EINVAL;
|
|
|
|
hstream = (struct hdac_stream *)stream;
|
|
|
|
dev_dbg(&hdev->dev, "%s: strm_tag: %d\n", __func__, hstream->stream_tag);
|
|
|
|
dai_map = &hdmi->dai_map[dai->id];
|
|
|
|
pcm = hdac_hdmi_get_pcm_from_cvt(hdmi, dai_map->cvt);
|
|
|
|
if (pcm)
|
|
pcm->stream_tag = (hstream->stream_tag << 4);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_set_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *hparams, struct snd_soc_dai *dai)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_dai_get_drvdata(dai);
|
|
struct hdac_hdmi_dai_port_map *dai_map;
|
|
struct hdac_hdmi_pcm *pcm;
|
|
unsigned int bits;
|
|
int format;
|
|
|
|
dai_map = &hdmi->dai_map[dai->id];
|
|
|
|
bits = snd_hdac_stream_format_bits(params_format(hparams), SNDRV_PCM_SUBFORMAT_STD,
|
|
dai->driver->playback.sig_bits);
|
|
format = snd_hdac_stream_format(params_channels(hparams), bits, params_rate(hparams));
|
|
|
|
pcm = hdac_hdmi_get_pcm_from_cvt(hdmi, dai_map->cvt);
|
|
if (!pcm)
|
|
return -EIO;
|
|
|
|
pcm->format = format;
|
|
pcm->channels = params_channels(hparams);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_query_port_connlist(struct hdac_device *hdev,
|
|
struct hdac_hdmi_pin *pin,
|
|
struct hdac_hdmi_port *port)
|
|
{
|
|
if (!(get_wcaps(hdev, pin->nid) & AC_WCAP_CONN_LIST)) {
|
|
dev_warn(&hdev->dev,
|
|
"HDMI: pin %d wcaps %#x does not support connection list\n",
|
|
pin->nid, get_wcaps(hdev, pin->nid));
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (hdac_hdmi_port_select_set(hdev, port) < 0)
|
|
return -EIO;
|
|
|
|
port->num_mux_nids = snd_hdac_get_connections(hdev, pin->nid,
|
|
port->mux_nids, HDA_MAX_CONNECTIONS);
|
|
if (port->num_mux_nids == 0)
|
|
dev_warn(&hdev->dev,
|
|
"No connections found for pin:port %d:%d\n",
|
|
pin->nid, port->id);
|
|
|
|
dev_dbg(&hdev->dev, "num_mux_nids %d for pin:port %d:%d\n",
|
|
port->num_mux_nids, pin->nid, port->id);
|
|
|
|
return port->num_mux_nids;
|
|
}
|
|
|
|
/*
|
|
* Query pcm list and return port to which stream is routed.
|
|
*
|
|
* Also query connection list of the pin, to validate the cvt to port map.
|
|
*
|
|
* Same stream rendering to multiple ports simultaneously can be done
|
|
* possibly, but not supported for now in driver. So return the first port
|
|
* connected.
|
|
*/
|
|
static struct hdac_hdmi_port *hdac_hdmi_get_port_from_cvt(
|
|
struct hdac_device *hdev,
|
|
struct hdac_hdmi_priv *hdmi,
|
|
struct hdac_hdmi_cvt *cvt)
|
|
{
|
|
struct hdac_hdmi_pcm *pcm;
|
|
struct hdac_hdmi_port *port;
|
|
int ret, i;
|
|
|
|
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
|
|
if (pcm->cvt == cvt) {
|
|
if (list_empty(&pcm->port_list))
|
|
continue;
|
|
|
|
list_for_each_entry(port, &pcm->port_list, head) {
|
|
mutex_lock(&pcm->lock);
|
|
ret = hdac_hdmi_query_port_connlist(hdev,
|
|
port->pin, port);
|
|
mutex_unlock(&pcm->lock);
|
|
if (ret < 0)
|
|
continue;
|
|
|
|
for (i = 0; i < port->num_mux_nids; i++) {
|
|
if (port->mux_nids[i] == cvt->nid &&
|
|
port->eld.monitor_present &&
|
|
port->eld.eld_valid)
|
|
return port;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Go through all converters and ensure connection is set to
|
|
* the correct pin as set via kcontrols.
|
|
*/
|
|
static void hdac_hdmi_verify_connect_sel_all_pins(struct hdac_device *hdev)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_port *port;
|
|
struct hdac_hdmi_cvt *cvt;
|
|
int cvt_idx = 0;
|
|
|
|
list_for_each_entry(cvt, &hdmi->cvt_list, head) {
|
|
port = hdac_hdmi_get_port_from_cvt(hdev, hdmi, cvt);
|
|
if (port && port->pin) {
|
|
snd_hdac_codec_write(hdev, port->pin->nid, 0,
|
|
AC_VERB_SET_CONNECT_SEL, cvt_idx);
|
|
dev_dbg(&hdev->dev, "%s: %s set connect %d -> %d\n",
|
|
__func__, cvt->name, port->pin->nid, cvt_idx);
|
|
}
|
|
++cvt_idx;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This tries to get a valid pin and set the HW constraints based on the
|
|
* ELD. Even if a valid pin is not found return success so that device open
|
|
* doesn't fail.
|
|
*/
|
|
static int hdac_hdmi_pcm_open(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_dai_get_drvdata(dai);
|
|
struct hdac_device *hdev = hdmi->hdev;
|
|
struct hdac_hdmi_dai_port_map *dai_map;
|
|
struct hdac_hdmi_cvt *cvt;
|
|
struct hdac_hdmi_port *port;
|
|
int ret;
|
|
|
|
dai_map = &hdmi->dai_map[dai->id];
|
|
|
|
cvt = dai_map->cvt;
|
|
port = hdac_hdmi_get_port_from_cvt(hdev, hdmi, cvt);
|
|
|
|
/*
|
|
* To make PA and other userland happy.
|
|
* userland scans devices so returning error does not help.
|
|
*/
|
|
if (!port)
|
|
return 0;
|
|
if ((!port->eld.monitor_present) ||
|
|
(!port->eld.eld_valid)) {
|
|
|
|
dev_warn(&hdev->dev,
|
|
"Failed: present?:%d ELD valid?:%d pin:port: %d:%d\n",
|
|
port->eld.monitor_present, port->eld.eld_valid,
|
|
port->pin->nid, port->id);
|
|
|
|
return 0;
|
|
}
|
|
|
|
dai_map->port = port;
|
|
|
|
ret = hdac_hdmi_eld_limit_formats(substream->runtime,
|
|
port->eld.eld_buffer);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return snd_pcm_hw_constraint_eld(substream->runtime,
|
|
port->eld.eld_buffer);
|
|
}
|
|
|
|
static void hdac_hdmi_pcm_close(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_dai_get_drvdata(dai);
|
|
struct hdac_hdmi_dai_port_map *dai_map;
|
|
struct hdac_hdmi_pcm *pcm;
|
|
|
|
dai_map = &hdmi->dai_map[dai->id];
|
|
|
|
pcm = hdac_hdmi_get_pcm_from_cvt(hdmi, dai_map->cvt);
|
|
|
|
if (pcm) {
|
|
mutex_lock(&pcm->lock);
|
|
pcm->chmap_set = false;
|
|
memset(pcm->chmap, 0, sizeof(pcm->chmap));
|
|
pcm->channels = 0;
|
|
mutex_unlock(&pcm->lock);
|
|
}
|
|
|
|
if (dai_map->port)
|
|
dai_map->port = NULL;
|
|
}
|
|
|
|
static int
|
|
hdac_hdmi_query_cvt_params(struct hdac_device *hdev, struct hdac_hdmi_cvt *cvt)
|
|
{
|
|
unsigned int chans;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
int err;
|
|
|
|
chans = get_wcaps(hdev, cvt->nid);
|
|
chans = get_wcaps_channels(chans);
|
|
|
|
cvt->params.channels_min = 2;
|
|
|
|
cvt->params.channels_max = chans;
|
|
if (chans > hdmi->chmap.channels_max)
|
|
hdmi->chmap.channels_max = chans;
|
|
|
|
err = snd_hdac_query_supported_pcm(hdev, cvt->nid,
|
|
&cvt->params.rates,
|
|
&cvt->params.formats,
|
|
NULL,
|
|
&cvt->params.maxbps);
|
|
if (err < 0)
|
|
dev_err(&hdev->dev,
|
|
"Failed to query pcm params for nid %d: %d\n",
|
|
cvt->nid, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int hdac_hdmi_fill_widget_info(struct device *dev,
|
|
struct snd_soc_dapm_widget *w, enum snd_soc_dapm_type id,
|
|
void *priv, const char *wname, const char *stream,
|
|
struct snd_kcontrol_new *wc, int numkc,
|
|
int (*event)(struct snd_soc_dapm_widget *,
|
|
struct snd_kcontrol *, int), unsigned short event_flags)
|
|
{
|
|
w->id = id;
|
|
w->name = devm_kstrdup(dev, wname, GFP_KERNEL);
|
|
if (!w->name)
|
|
return -ENOMEM;
|
|
|
|
w->sname = stream;
|
|
w->reg = SND_SOC_NOPM;
|
|
w->shift = 0;
|
|
w->kcontrol_news = wc;
|
|
w->num_kcontrols = numkc;
|
|
w->priv = priv;
|
|
w->event = event;
|
|
w->event_flags = event_flags;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hdac_hdmi_fill_route(struct snd_soc_dapm_route *route,
|
|
const char *sink, const char *control, const char *src,
|
|
int (*handler)(struct snd_soc_dapm_widget *src,
|
|
struct snd_soc_dapm_widget *sink))
|
|
{
|
|
route->sink = sink;
|
|
route->source = src;
|
|
route->control = control;
|
|
route->connected = handler;
|
|
}
|
|
|
|
static struct hdac_hdmi_pcm *hdac_hdmi_get_pcm(struct hdac_device *hdev,
|
|
struct hdac_hdmi_port *port)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm;
|
|
struct hdac_hdmi_port *p;
|
|
|
|
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
|
|
if (list_empty(&pcm->port_list))
|
|
continue;
|
|
|
|
list_for_each_entry(p, &pcm->port_list, head) {
|
|
if (p->id == port->id && port->pin == p->pin)
|
|
return pcm;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void hdac_hdmi_set_power_state(struct hdac_device *hdev,
|
|
hda_nid_t nid, unsigned int pwr_state)
|
|
{
|
|
int count;
|
|
unsigned int state;
|
|
|
|
if (get_wcaps(hdev, nid) & AC_WCAP_POWER) {
|
|
if (!snd_hdac_check_power_state(hdev, nid, pwr_state)) {
|
|
for (count = 0; count < 10; count++) {
|
|
snd_hdac_codec_read(hdev, nid, 0,
|
|
AC_VERB_SET_POWER_STATE,
|
|
pwr_state);
|
|
state = snd_hdac_sync_power_state(hdev,
|
|
nid, pwr_state);
|
|
if (!(state & AC_PWRST_ERROR))
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void hdac_hdmi_set_amp(struct hdac_device *hdev,
|
|
hda_nid_t nid, int val)
|
|
{
|
|
if (get_wcaps(hdev, nid) & AC_WCAP_OUT_AMP)
|
|
snd_hdac_codec_write(hdev, nid, 0,
|
|
AC_VERB_SET_AMP_GAIN_MUTE, val);
|
|
}
|
|
|
|
|
|
static int hdac_hdmi_pin_output_widget_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kc, int event)
|
|
{
|
|
struct hdac_hdmi_port *port = w->priv;
|
|
struct hdac_device *hdev = dev_to_hdac_dev(w->dapm->dev);
|
|
struct hdac_hdmi_pcm *pcm;
|
|
|
|
dev_dbg(&hdev->dev, "%s: widget: %s event: %x\n",
|
|
__func__, w->name, event);
|
|
|
|
pcm = hdac_hdmi_get_pcm(hdev, port);
|
|
if (!pcm)
|
|
return -EIO;
|
|
|
|
/* set the device if pin is mst_capable */
|
|
if (hdac_hdmi_port_select_set(hdev, port) < 0)
|
|
return -EIO;
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
hdac_hdmi_set_power_state(hdev, port->pin->nid, AC_PWRST_D0);
|
|
|
|
/* Enable out path for this pin widget */
|
|
snd_hdac_codec_write(hdev, port->pin->nid, 0,
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
|
|
|
|
hdac_hdmi_set_amp(hdev, port->pin->nid, AMP_OUT_UNMUTE);
|
|
|
|
return hdac_hdmi_setup_audio_infoframe(hdev, pcm, port);
|
|
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
hdac_hdmi_set_amp(hdev, port->pin->nid, AMP_OUT_MUTE);
|
|
|
|
/* Disable out path for this pin widget */
|
|
snd_hdac_codec_write(hdev, port->pin->nid, 0,
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, 0);
|
|
|
|
hdac_hdmi_set_power_state(hdev, port->pin->nid, AC_PWRST_D3);
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_cvt_output_widget_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kc, int event)
|
|
{
|
|
struct hdac_hdmi_cvt *cvt = w->priv;
|
|
struct hdac_device *hdev = dev_to_hdac_dev(w->dapm->dev);
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm;
|
|
|
|
dev_dbg(&hdev->dev, "%s: widget: %s event: %x\n",
|
|
__func__, w->name, event);
|
|
|
|
pcm = hdac_hdmi_get_pcm_from_cvt(hdmi, cvt);
|
|
if (!pcm)
|
|
return -EIO;
|
|
|
|
switch (event) {
|
|
case SND_SOC_DAPM_PRE_PMU:
|
|
hdac_hdmi_set_power_state(hdev, cvt->nid, AC_PWRST_D0);
|
|
|
|
/* Enable transmission */
|
|
snd_hdac_codec_write(hdev, cvt->nid, 0,
|
|
AC_VERB_SET_DIGI_CONVERT_1, 1);
|
|
|
|
/* Category Code (CC) to zero */
|
|
snd_hdac_codec_write(hdev, cvt->nid, 0,
|
|
AC_VERB_SET_DIGI_CONVERT_2, 0);
|
|
|
|
snd_hdac_codec_write(hdev, cvt->nid, 0,
|
|
AC_VERB_SET_CHANNEL_STREAMID, pcm->stream_tag);
|
|
snd_hdac_codec_write(hdev, cvt->nid, 0,
|
|
AC_VERB_SET_STREAM_FORMAT, pcm->format);
|
|
|
|
/*
|
|
* The connection indices are shared by all converters and
|
|
* may interfere with each other. Ensure correct
|
|
* routing for all converters at stream start.
|
|
*/
|
|
hdac_hdmi_verify_connect_sel_all_pins(hdev);
|
|
|
|
break;
|
|
|
|
case SND_SOC_DAPM_POST_PMD:
|
|
snd_hdac_codec_write(hdev, cvt->nid, 0,
|
|
AC_VERB_SET_CHANNEL_STREAMID, 0);
|
|
snd_hdac_codec_write(hdev, cvt->nid, 0,
|
|
AC_VERB_SET_STREAM_FORMAT, 0);
|
|
|
|
hdac_hdmi_set_power_state(hdev, cvt->nid, AC_PWRST_D3);
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_pin_mux_widget_event(struct snd_soc_dapm_widget *w,
|
|
struct snd_kcontrol *kc, int event)
|
|
{
|
|
struct hdac_hdmi_port *port = w->priv;
|
|
struct hdac_device *hdev = dev_to_hdac_dev(w->dapm->dev);
|
|
int mux_idx;
|
|
|
|
dev_dbg(&hdev->dev, "%s: widget: %s event: %x\n",
|
|
__func__, w->name, event);
|
|
|
|
if (!kc)
|
|
kc = w->kcontrols[0];
|
|
|
|
mux_idx = dapm_kcontrol_get_value(kc);
|
|
|
|
/* set the device if pin is mst_capable */
|
|
if (hdac_hdmi_port_select_set(hdev, port) < 0)
|
|
return -EIO;
|
|
|
|
if (mux_idx > 0) {
|
|
snd_hdac_codec_write(hdev, port->pin->nid, 0,
|
|
AC_VERB_SET_CONNECT_SEL, (mux_idx - 1));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Based on user selection, map the PINs with the PCMs.
|
|
*/
|
|
static int hdac_hdmi_set_pin_port_mux(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
int ret;
|
|
struct hdac_hdmi_port *p, *p_next;
|
|
struct soc_enum *e = (struct soc_enum *)kcontrol->private_value;
|
|
struct snd_soc_dapm_widget *w = snd_soc_dapm_kcontrol_widget(kcontrol);
|
|
struct snd_soc_dapm_context *dapm = w->dapm;
|
|
struct hdac_hdmi_port *port = w->priv;
|
|
struct hdac_device *hdev = dev_to_hdac_dev(dapm->dev);
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm;
|
|
const char *cvt_name = e->texts[ucontrol->value.enumerated.item[0]];
|
|
|
|
ret = snd_soc_dapm_put_enum_double(kcontrol, ucontrol);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (port == NULL)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&hdmi->pin_mutex);
|
|
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
|
|
if (list_empty(&pcm->port_list))
|
|
continue;
|
|
|
|
list_for_each_entry_safe(p, p_next, &pcm->port_list, head) {
|
|
if (p == port && p->id == port->id &&
|
|
p->pin == port->pin) {
|
|
hdac_hdmi_jack_report_sync(pcm, port, false);
|
|
list_del(&p->head);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Jack status is not reported during device probe as the
|
|
* PCMs are not registered by then. So report it here.
|
|
*/
|
|
list_for_each_entry(pcm, &hdmi->pcm_list, head) {
|
|
if (!strcmp(cvt_name, pcm->cvt->name)) {
|
|
list_add_tail(&port->head, &pcm->port_list);
|
|
if (port->eld.monitor_present && port->eld.eld_valid) {
|
|
hdac_hdmi_jack_report_sync(pcm, port, true);
|
|
mutex_unlock(&hdmi->pin_mutex);
|
|
return ret;
|
|
}
|
|
}
|
|
}
|
|
mutex_unlock(&hdmi->pin_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Ideally the Mux inputs should be based on the num_muxs enumerated, but
|
|
* the display driver seem to be programming the connection list for the pin
|
|
* widget runtime.
|
|
*
|
|
* So programming all the possible inputs for the mux, the user has to take
|
|
* care of selecting the right one and leaving all other inputs selected to
|
|
* "NONE"
|
|
*/
|
|
static int hdac_hdmi_create_pin_port_muxs(struct hdac_device *hdev,
|
|
struct hdac_hdmi_port *port,
|
|
struct snd_soc_dapm_widget *widget,
|
|
const char *widget_name)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pin *pin = port->pin;
|
|
struct snd_kcontrol_new *kc;
|
|
struct hdac_hdmi_cvt *cvt;
|
|
struct soc_enum *se;
|
|
char kc_name[NAME_SIZE];
|
|
char mux_items[NAME_SIZE];
|
|
/* To hold inputs to the Pin mux */
|
|
char *items[HDA_MAX_CONNECTIONS];
|
|
int i = 0;
|
|
int num_items = hdmi->num_cvt + 1;
|
|
|
|
kc = devm_kzalloc(&hdev->dev, sizeof(*kc), GFP_KERNEL);
|
|
if (!kc)
|
|
return -ENOMEM;
|
|
|
|
se = devm_kzalloc(&hdev->dev, sizeof(*se), GFP_KERNEL);
|
|
if (!se)
|
|
return -ENOMEM;
|
|
|
|
snprintf(kc_name, NAME_SIZE, "Pin %d port %d Input",
|
|
pin->nid, port->id);
|
|
kc->name = devm_kstrdup(&hdev->dev, kc_name, GFP_KERNEL);
|
|
if (!kc->name)
|
|
return -ENOMEM;
|
|
|
|
kc->private_value = (long)se;
|
|
kc->iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
kc->access = 0;
|
|
kc->info = snd_soc_info_enum_double;
|
|
kc->put = hdac_hdmi_set_pin_port_mux;
|
|
kc->get = snd_soc_dapm_get_enum_double;
|
|
|
|
se->reg = SND_SOC_NOPM;
|
|
|
|
/* enum texts: ["NONE", "cvt #", "cvt #", ...] */
|
|
se->items = num_items;
|
|
se->mask = roundup_pow_of_two(se->items) - 1;
|
|
|
|
sprintf(mux_items, "NONE");
|
|
items[i] = devm_kstrdup(&hdev->dev, mux_items, GFP_KERNEL);
|
|
if (!items[i])
|
|
return -ENOMEM;
|
|
|
|
list_for_each_entry(cvt, &hdmi->cvt_list, head) {
|
|
i++;
|
|
sprintf(mux_items, "cvt %d", cvt->nid);
|
|
items[i] = devm_kstrdup(&hdev->dev, mux_items, GFP_KERNEL);
|
|
if (!items[i])
|
|
return -ENOMEM;
|
|
}
|
|
|
|
se->texts = devm_kmemdup(&hdev->dev, items,
|
|
(num_items * sizeof(char *)), GFP_KERNEL);
|
|
if (!se->texts)
|
|
return -ENOMEM;
|
|
|
|
return hdac_hdmi_fill_widget_info(&hdev->dev, widget,
|
|
snd_soc_dapm_mux, port, widget_name, NULL, kc, 1,
|
|
hdac_hdmi_pin_mux_widget_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_REG);
|
|
}
|
|
|
|
/* Add cvt <- input <- mux route map */
|
|
static void hdac_hdmi_add_pinmux_cvt_route(struct hdac_device *hdev,
|
|
struct snd_soc_dapm_widget *widgets,
|
|
struct snd_soc_dapm_route *route, int rindex)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
const struct snd_kcontrol_new *kc;
|
|
struct soc_enum *se;
|
|
int mux_index = hdmi->num_cvt + hdmi->num_ports;
|
|
int i, j;
|
|
|
|
for (i = 0; i < hdmi->num_ports; i++) {
|
|
kc = widgets[mux_index].kcontrol_news;
|
|
se = (struct soc_enum *)kc->private_value;
|
|
for (j = 0; j < hdmi->num_cvt; j++) {
|
|
hdac_hdmi_fill_route(&route[rindex],
|
|
widgets[mux_index].name,
|
|
se->texts[j + 1],
|
|
widgets[j].name, NULL);
|
|
|
|
rindex++;
|
|
}
|
|
|
|
mux_index++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Widgets are added in the below sequence
|
|
* Converter widgets for num converters enumerated
|
|
* Pin-port widgets for num ports for Pins enumerated
|
|
* Pin-port mux widgets to represent connenction list of pin widget
|
|
*
|
|
* For each port, one Mux and One output widget is added
|
|
* Total widgets elements = num_cvt + (num_ports * 2);
|
|
*
|
|
* Routes are added as below:
|
|
* pin-port mux -> pin (based on num_ports)
|
|
* cvt -> "Input sel control" -> pin-port_mux
|
|
*
|
|
* Total route elements:
|
|
* num_ports + (pin_muxes * num_cvt)
|
|
*/
|
|
static int create_fill_widget_route_map(struct snd_soc_dapm_context *dapm)
|
|
{
|
|
struct snd_soc_dapm_widget *widgets;
|
|
struct snd_soc_dapm_route *route;
|
|
struct hdac_device *hdev = dev_to_hdac_dev(dapm->dev);
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct snd_soc_dai_driver *dai_drv = hdmi->dai_drv;
|
|
char widget_name[NAME_SIZE];
|
|
struct hdac_hdmi_cvt *cvt;
|
|
struct hdac_hdmi_pin *pin;
|
|
int ret, i = 0, num_routes = 0, j;
|
|
|
|
if (list_empty(&hdmi->cvt_list) || list_empty(&hdmi->pin_list))
|
|
return -EINVAL;
|
|
|
|
widgets = devm_kzalloc(dapm->dev, (sizeof(*widgets) *
|
|
((2 * hdmi->num_ports) + hdmi->num_cvt)),
|
|
GFP_KERNEL);
|
|
|
|
if (!widgets)
|
|
return -ENOMEM;
|
|
|
|
/* DAPM widgets to represent each converter widget */
|
|
list_for_each_entry(cvt, &hdmi->cvt_list, head) {
|
|
sprintf(widget_name, "Converter %d", cvt->nid);
|
|
ret = hdac_hdmi_fill_widget_info(dapm->dev, &widgets[i],
|
|
snd_soc_dapm_aif_in, cvt,
|
|
widget_name, dai_drv[i].playback.stream_name, NULL, 0,
|
|
hdac_hdmi_cvt_output_widget_event,
|
|
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD);
|
|
if (ret < 0)
|
|
return ret;
|
|
i++;
|
|
}
|
|
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
for (j = 0; j < pin->num_ports; j++) {
|
|
sprintf(widget_name, "hif%d-%d Output",
|
|
pin->nid, pin->ports[j].id);
|
|
ret = hdac_hdmi_fill_widget_info(dapm->dev, &widgets[i],
|
|
snd_soc_dapm_output, &pin->ports[j],
|
|
widget_name, NULL, NULL, 0,
|
|
hdac_hdmi_pin_output_widget_event,
|
|
SND_SOC_DAPM_PRE_PMU |
|
|
SND_SOC_DAPM_POST_PMD);
|
|
if (ret < 0)
|
|
return ret;
|
|
pin->ports[j].output_pin = widgets[i].name;
|
|
i++;
|
|
}
|
|
}
|
|
|
|
/* DAPM widgets to represent the connection list to pin widget */
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
for (j = 0; j < pin->num_ports; j++) {
|
|
sprintf(widget_name, "Pin%d-Port%d Mux",
|
|
pin->nid, pin->ports[j].id);
|
|
ret = hdac_hdmi_create_pin_port_muxs(hdev,
|
|
&pin->ports[j], &widgets[i],
|
|
widget_name);
|
|
if (ret < 0)
|
|
return ret;
|
|
i++;
|
|
|
|
/* For cvt to pin_mux mapping */
|
|
num_routes += hdmi->num_cvt;
|
|
|
|
/* For pin_mux to pin mapping */
|
|
num_routes++;
|
|
}
|
|
}
|
|
|
|
route = devm_kzalloc(dapm->dev, (sizeof(*route) * num_routes),
|
|
GFP_KERNEL);
|
|
if (!route)
|
|
return -ENOMEM;
|
|
|
|
i = 0;
|
|
/* Add pin <- NULL <- mux route map */
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
for (j = 0; j < pin->num_ports; j++) {
|
|
int sink_index = i + hdmi->num_cvt;
|
|
int src_index = sink_index + pin->num_ports *
|
|
hdmi->num_pin;
|
|
|
|
hdac_hdmi_fill_route(&route[i],
|
|
widgets[sink_index].name, NULL,
|
|
widgets[src_index].name, NULL);
|
|
i++;
|
|
}
|
|
}
|
|
|
|
hdac_hdmi_add_pinmux_cvt_route(hdev, widgets, route, i);
|
|
|
|
snd_soc_dapm_new_controls(dapm, widgets,
|
|
((2 * hdmi->num_ports) + hdmi->num_cvt));
|
|
|
|
snd_soc_dapm_add_routes(dapm, route, num_routes);
|
|
snd_soc_dapm_new_widgets(dapm->card);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int hdac_hdmi_init_dai_map(struct hdac_device *hdev)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_dai_port_map *dai_map;
|
|
struct hdac_hdmi_cvt *cvt;
|
|
int dai_id = 0;
|
|
|
|
if (list_empty(&hdmi->cvt_list))
|
|
return -EINVAL;
|
|
|
|
list_for_each_entry(cvt, &hdmi->cvt_list, head) {
|
|
dai_map = &hdmi->dai_map[dai_id];
|
|
dai_map->dai_id = dai_id;
|
|
dai_map->cvt = cvt;
|
|
|
|
dai_id++;
|
|
|
|
if (dai_id == HDA_MAX_CVTS) {
|
|
dev_warn(&hdev->dev,
|
|
"Max dais supported: %d\n", dai_id);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_add_cvt(struct hdac_device *hdev, hda_nid_t nid)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_cvt *cvt;
|
|
char name[NAME_SIZE];
|
|
|
|
cvt = devm_kzalloc(&hdev->dev, sizeof(*cvt), GFP_KERNEL);
|
|
if (!cvt)
|
|
return -ENOMEM;
|
|
|
|
cvt->nid = nid;
|
|
sprintf(name, "cvt %d", cvt->nid);
|
|
cvt->name = devm_kstrdup(&hdev->dev, name, GFP_KERNEL);
|
|
if (!cvt->name)
|
|
return -ENOMEM;
|
|
|
|
list_add_tail(&cvt->head, &hdmi->cvt_list);
|
|
hdmi->num_cvt++;
|
|
|
|
return hdac_hdmi_query_cvt_params(hdev, cvt);
|
|
}
|
|
|
|
static int hdac_hdmi_parse_eld(struct hdac_device *hdev,
|
|
struct hdac_hdmi_port *port)
|
|
{
|
|
unsigned int ver, mnl;
|
|
|
|
ver = (port->eld.eld_buffer[DRM_ELD_VER] & DRM_ELD_VER_MASK)
|
|
>> DRM_ELD_VER_SHIFT;
|
|
|
|
if (ver != ELD_VER_CEA_861D && ver != ELD_VER_PARTIAL) {
|
|
dev_err(&hdev->dev, "HDMI: Unknown ELD version %d\n", ver);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mnl = (port->eld.eld_buffer[DRM_ELD_CEA_EDID_VER_MNL] &
|
|
DRM_ELD_MNL_MASK) >> DRM_ELD_MNL_SHIFT;
|
|
|
|
if (mnl > ELD_MAX_MNL) {
|
|
dev_err(&hdev->dev, "HDMI: MNL Invalid %d\n", mnl);
|
|
return -EINVAL;
|
|
}
|
|
|
|
port->eld.info.spk_alloc = port->eld.eld_buffer[DRM_ELD_SPEAKER];
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hdac_hdmi_present_sense(struct hdac_hdmi_pin *pin,
|
|
struct hdac_hdmi_port *port)
|
|
{
|
|
struct hdac_device *hdev = pin->hdev;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm;
|
|
int size = 0;
|
|
int port_id = -1;
|
|
bool eld_valid, eld_changed;
|
|
|
|
if (!hdmi)
|
|
return;
|
|
|
|
/*
|
|
* In case of non MST pin, get_eld info API expectes port
|
|
* to be -1.
|
|
*/
|
|
mutex_lock(&hdmi->pin_mutex);
|
|
port->eld.monitor_present = false;
|
|
|
|
if (pin->mst_capable)
|
|
port_id = port->id;
|
|
|
|
size = snd_hdac_acomp_get_eld(hdev, pin->nid, port_id,
|
|
&port->eld.monitor_present,
|
|
port->eld.eld_buffer,
|
|
ELD_MAX_SIZE);
|
|
|
|
if (size > 0) {
|
|
size = min(size, ELD_MAX_SIZE);
|
|
if (hdac_hdmi_parse_eld(hdev, port) < 0)
|
|
size = -EINVAL;
|
|
}
|
|
|
|
eld_valid = port->eld.eld_valid;
|
|
|
|
if (size > 0) {
|
|
port->eld.eld_valid = true;
|
|
port->eld.eld_size = size;
|
|
} else {
|
|
port->eld.eld_valid = false;
|
|
port->eld.eld_size = 0;
|
|
}
|
|
|
|
eld_changed = (eld_valid != port->eld.eld_valid);
|
|
|
|
pcm = hdac_hdmi_get_pcm(hdev, port);
|
|
|
|
if (!port->eld.monitor_present || !port->eld.eld_valid) {
|
|
|
|
dev_err(&hdev->dev, "%s: disconnect for pin:port %d:%d\n",
|
|
__func__, pin->nid, port->id);
|
|
|
|
/*
|
|
* PCMs are not registered during device probe, so don't
|
|
* report jack here. It will be done in usermode mux
|
|
* control select.
|
|
*/
|
|
if (pcm) {
|
|
hdac_hdmi_jack_report(pcm, port, false);
|
|
schedule_work(&port->dapm_work);
|
|
}
|
|
|
|
mutex_unlock(&hdmi->pin_mutex);
|
|
return;
|
|
}
|
|
|
|
if (port->eld.monitor_present && port->eld.eld_valid) {
|
|
if (pcm) {
|
|
hdac_hdmi_jack_report(pcm, port, true);
|
|
schedule_work(&port->dapm_work);
|
|
}
|
|
|
|
print_hex_dump_debug("ELD: ", DUMP_PREFIX_OFFSET, 16, 1,
|
|
port->eld.eld_buffer, port->eld.eld_size, false);
|
|
|
|
}
|
|
mutex_unlock(&hdmi->pin_mutex);
|
|
|
|
if (eld_changed && pcm)
|
|
snd_ctl_notify(hdmi->card,
|
|
SNDRV_CTL_EVENT_MASK_VALUE |
|
|
SNDRV_CTL_EVENT_MASK_INFO,
|
|
&pcm->eld_ctl->id);
|
|
}
|
|
|
|
static int hdac_hdmi_add_ports(struct hdac_device *hdev,
|
|
struct hdac_hdmi_pin *pin)
|
|
{
|
|
struct hdac_hdmi_port *ports;
|
|
int max_ports = HDA_MAX_PORTS;
|
|
int i;
|
|
|
|
/*
|
|
* FIXME: max_port may vary for each platform, so pass this as
|
|
* as driver data or query from i915 interface when this API is
|
|
* implemented.
|
|
*/
|
|
|
|
ports = devm_kcalloc(&hdev->dev, max_ports, sizeof(*ports), GFP_KERNEL);
|
|
if (!ports)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < max_ports; i++) {
|
|
ports[i].id = i;
|
|
ports[i].pin = pin;
|
|
INIT_WORK(&ports[i].dapm_work, hdac_hdmi_jack_dapm_work);
|
|
}
|
|
pin->ports = ports;
|
|
pin->num_ports = max_ports;
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_add_pin(struct hdac_device *hdev, hda_nid_t nid)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pin *pin;
|
|
int ret;
|
|
|
|
pin = devm_kzalloc(&hdev->dev, sizeof(*pin), GFP_KERNEL);
|
|
if (!pin)
|
|
return -ENOMEM;
|
|
|
|
pin->nid = nid;
|
|
pin->mst_capable = false;
|
|
pin->hdev = hdev;
|
|
ret = hdac_hdmi_add_ports(hdev, pin);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
list_add_tail(&pin->head, &hdmi->pin_list);
|
|
hdmi->num_pin++;
|
|
hdmi->num_ports += pin->num_ports;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define INTEL_VENDOR_NID 0x08
|
|
#define INTEL_GLK_VENDOR_NID 0x0b
|
|
#define INTEL_GET_VENDOR_VERB 0xf81
|
|
#define INTEL_SET_VENDOR_VERB 0x781
|
|
#define INTEL_EN_DP12 0x02 /* enable DP 1.2 features */
|
|
#define INTEL_EN_ALL_PIN_CVTS 0x01 /* enable 2nd & 3rd pins and convertors */
|
|
|
|
static void hdac_hdmi_skl_enable_all_pins(struct hdac_device *hdev)
|
|
{
|
|
unsigned int vendor_param;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
unsigned int vendor_nid = hdmi->drv_data->vendor_nid;
|
|
|
|
vendor_param = snd_hdac_codec_read(hdev, vendor_nid, 0,
|
|
INTEL_GET_VENDOR_VERB, 0);
|
|
if (vendor_param == -1 || vendor_param & INTEL_EN_ALL_PIN_CVTS)
|
|
return;
|
|
|
|
vendor_param |= INTEL_EN_ALL_PIN_CVTS;
|
|
vendor_param = snd_hdac_codec_read(hdev, vendor_nid, 0,
|
|
INTEL_SET_VENDOR_VERB, vendor_param);
|
|
if (vendor_param == -1)
|
|
return;
|
|
}
|
|
|
|
static void hdac_hdmi_skl_enable_dp12(struct hdac_device *hdev)
|
|
{
|
|
unsigned int vendor_param;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
unsigned int vendor_nid = hdmi->drv_data->vendor_nid;
|
|
|
|
vendor_param = snd_hdac_codec_read(hdev, vendor_nid, 0,
|
|
INTEL_GET_VENDOR_VERB, 0);
|
|
if (vendor_param == -1 || vendor_param & INTEL_EN_DP12)
|
|
return;
|
|
|
|
/* enable DP1.2 mode */
|
|
vendor_param |= INTEL_EN_DP12;
|
|
vendor_param = snd_hdac_codec_read(hdev, vendor_nid, 0,
|
|
INTEL_SET_VENDOR_VERB, vendor_param);
|
|
if (vendor_param == -1)
|
|
return;
|
|
|
|
}
|
|
|
|
static int hdac_hdmi_eld_ctl_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
|
|
struct hdac_hdmi_pcm *pcm;
|
|
struct hdac_hdmi_port *port;
|
|
struct hdac_hdmi_eld *eld;
|
|
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
|
|
uinfo->count = 0;
|
|
|
|
pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
|
|
if (!pcm) {
|
|
dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
|
|
kcontrol->id.device);
|
|
return 0;
|
|
}
|
|
|
|
if (list_empty(&pcm->port_list)) {
|
|
dev_dbg(component->dev, "%s: empty port list, device %d\n",
|
|
__func__, kcontrol->id.device);
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&hdmi->pin_mutex);
|
|
|
|
list_for_each_entry(port, &pcm->port_list, head) {
|
|
eld = &port->eld;
|
|
|
|
if (eld->eld_valid) {
|
|
uinfo->count = eld->eld_size;
|
|
break;
|
|
}
|
|
}
|
|
|
|
mutex_unlock(&hdmi->pin_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_eld_ctl_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
|
|
struct hdac_hdmi_pcm *pcm;
|
|
struct hdac_hdmi_port *port;
|
|
struct hdac_hdmi_eld *eld;
|
|
|
|
memset(ucontrol->value.bytes.data, 0, sizeof(ucontrol->value.bytes.data));
|
|
|
|
pcm = get_hdmi_pcm_from_id(hdmi, kcontrol->id.device);
|
|
if (!pcm) {
|
|
dev_dbg(component->dev, "%s: no pcm, device %d\n", __func__,
|
|
kcontrol->id.device);
|
|
return 0;
|
|
}
|
|
|
|
if (list_empty(&pcm->port_list)) {
|
|
dev_dbg(component->dev, "%s: empty port list, device %d\n",
|
|
__func__, kcontrol->id.device);
|
|
return 0;
|
|
}
|
|
|
|
mutex_lock(&hdmi->pin_mutex);
|
|
|
|
list_for_each_entry(port, &pcm->port_list, head) {
|
|
eld = &port->eld;
|
|
|
|
if (!eld->eld_valid)
|
|
continue;
|
|
|
|
if (eld->eld_size > ARRAY_SIZE(ucontrol->value.bytes.data) ||
|
|
eld->eld_size > ELD_MAX_SIZE) {
|
|
mutex_unlock(&hdmi->pin_mutex);
|
|
|
|
dev_err(component->dev, "%s: buffer too small, device %d eld_size %d\n",
|
|
__func__, kcontrol->id.device, eld->eld_size);
|
|
snd_BUG();
|
|
return -EINVAL;
|
|
}
|
|
|
|
memcpy(ucontrol->value.bytes.data, eld->eld_buffer,
|
|
eld->eld_size);
|
|
break;
|
|
}
|
|
|
|
mutex_unlock(&hdmi->pin_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_create_eld_ctl(struct snd_soc_component *component, struct hdac_hdmi_pcm *pcm)
|
|
{
|
|
struct snd_kcontrol *kctl;
|
|
struct snd_kcontrol_new hdmi_eld_ctl = {
|
|
.access = SNDRV_CTL_ELEM_ACCESS_READ |
|
|
SNDRV_CTL_ELEM_ACCESS_VOLATILE,
|
|
.iface = SNDRV_CTL_ELEM_IFACE_PCM,
|
|
.name = "ELD",
|
|
.info = hdac_hdmi_eld_ctl_info,
|
|
.get = hdac_hdmi_eld_ctl_get,
|
|
.device = pcm->pcm_id,
|
|
};
|
|
|
|
/* add ELD ctl with the device number corresponding to the PCM stream */
|
|
kctl = snd_ctl_new1(&hdmi_eld_ctl, component);
|
|
if (!kctl)
|
|
return -ENOMEM;
|
|
|
|
pcm->eld_ctl = kctl;
|
|
|
|
return snd_ctl_add(component->card->snd_card, kctl);
|
|
}
|
|
|
|
static const struct snd_soc_dai_ops hdmi_dai_ops = {
|
|
.startup = hdac_hdmi_pcm_open,
|
|
.shutdown = hdac_hdmi_pcm_close,
|
|
.hw_params = hdac_hdmi_set_hw_params,
|
|
.set_stream = hdac_hdmi_set_stream,
|
|
};
|
|
|
|
/*
|
|
* Each converter can support a stream independently. So a dai is created
|
|
* based on the number of converter queried.
|
|
*/
|
|
static int hdac_hdmi_create_dais(struct hdac_device *hdev,
|
|
struct snd_soc_dai_driver **dais,
|
|
struct hdac_hdmi_priv *hdmi, int num_dais)
|
|
{
|
|
struct snd_soc_dai_driver *hdmi_dais;
|
|
struct hdac_hdmi_cvt *cvt;
|
|
char name[NAME_SIZE], dai_name[NAME_SIZE];
|
|
int i = 0;
|
|
u32 rates, bps;
|
|
unsigned int rate_max = 384000, rate_min = 8000;
|
|
u64 formats;
|
|
int ret;
|
|
|
|
hdmi_dais = devm_kzalloc(&hdev->dev,
|
|
(sizeof(*hdmi_dais) * num_dais),
|
|
GFP_KERNEL);
|
|
if (!hdmi_dais)
|
|
return -ENOMEM;
|
|
|
|
list_for_each_entry(cvt, &hdmi->cvt_list, head) {
|
|
ret = snd_hdac_query_supported_pcm(hdev, cvt->nid,
|
|
&rates, &formats, NULL, &bps);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Filter out 44.1, 88.2 and 176.4Khz */
|
|
rates &= ~(SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_88200 |
|
|
SNDRV_PCM_RATE_176400);
|
|
if (!rates)
|
|
return -EINVAL;
|
|
|
|
sprintf(dai_name, "intel-hdmi-hifi%d", i+1);
|
|
hdmi_dais[i].name = devm_kstrdup(&hdev->dev,
|
|
dai_name, GFP_KERNEL);
|
|
|
|
if (!hdmi_dais[i].name)
|
|
return -ENOMEM;
|
|
|
|
snprintf(name, sizeof(name), "hifi%d", i+1);
|
|
hdmi_dais[i].playback.stream_name =
|
|
devm_kstrdup(&hdev->dev, name, GFP_KERNEL);
|
|
if (!hdmi_dais[i].playback.stream_name)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Set caps based on capability queried from the converter.
|
|
* It will be constrained runtime based on ELD queried.
|
|
*/
|
|
hdmi_dais[i].playback.formats = formats;
|
|
hdmi_dais[i].playback.rates = rates;
|
|
hdmi_dais[i].playback.rate_max = rate_max;
|
|
hdmi_dais[i].playback.rate_min = rate_min;
|
|
hdmi_dais[i].playback.channels_min = 2;
|
|
hdmi_dais[i].playback.channels_max = 2;
|
|
hdmi_dais[i].playback.sig_bits = bps;
|
|
hdmi_dais[i].ops = &hdmi_dai_ops;
|
|
i++;
|
|
}
|
|
|
|
*dais = hdmi_dais;
|
|
hdmi->dai_drv = hdmi_dais;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Parse all nodes and store the cvt/pin nids in array
|
|
* Add one time initialization for pin and cvt widgets
|
|
*/
|
|
static int hdac_hdmi_parse_and_map_nid(struct hdac_device *hdev,
|
|
struct snd_soc_dai_driver **dais, int *num_dais)
|
|
{
|
|
hda_nid_t nid;
|
|
int i, num_nodes;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
int ret;
|
|
|
|
hdac_hdmi_skl_enable_all_pins(hdev);
|
|
hdac_hdmi_skl_enable_dp12(hdev);
|
|
|
|
num_nodes = snd_hdac_get_sub_nodes(hdev, hdev->afg, &nid);
|
|
if (!nid || num_nodes <= 0) {
|
|
dev_warn(&hdev->dev, "HDMI: failed to get afg sub nodes\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < num_nodes; i++, nid++) {
|
|
unsigned int caps;
|
|
unsigned int type;
|
|
|
|
caps = get_wcaps(hdev, nid);
|
|
type = get_wcaps_type(caps);
|
|
|
|
if (!(caps & AC_WCAP_DIGITAL))
|
|
continue;
|
|
|
|
switch (type) {
|
|
|
|
case AC_WID_AUD_OUT:
|
|
ret = hdac_hdmi_add_cvt(hdev, nid);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
|
|
case AC_WID_PIN:
|
|
ret = hdac_hdmi_add_pin(hdev, nid);
|
|
if (ret < 0)
|
|
return ret;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!hdmi->num_pin || !hdmi->num_cvt) {
|
|
ret = -EIO;
|
|
dev_err(&hdev->dev, "Bad pin/cvt setup in %s\n", __func__);
|
|
return ret;
|
|
}
|
|
|
|
ret = hdac_hdmi_create_dais(hdev, dais, hdmi, hdmi->num_cvt);
|
|
if (ret) {
|
|
dev_err(&hdev->dev, "Failed to create dais with err: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
*num_dais = hdmi->num_cvt;
|
|
ret = hdac_hdmi_init_dai_map(hdev);
|
|
if (ret < 0)
|
|
dev_err(&hdev->dev, "Failed to init DAI map with err: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
static int hdac_hdmi_pin2port(void *aptr, int pin)
|
|
{
|
|
return pin - 4; /* map NID 0x05 -> port #1 */
|
|
}
|
|
|
|
static void hdac_hdmi_eld_notify_cb(void *aptr, int port, int pipe)
|
|
{
|
|
struct hdac_device *hdev = aptr;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pin *pin;
|
|
struct hdac_hdmi_port *hport = NULL;
|
|
struct snd_soc_component *component = hdmi->component;
|
|
int i;
|
|
|
|
/* Don't know how this mapping is derived */
|
|
hda_nid_t pin_nid = port + 0x04;
|
|
|
|
dev_dbg(&hdev->dev, "%s: for pin:%d port=%d\n", __func__,
|
|
pin_nid, pipe);
|
|
|
|
/*
|
|
* skip notification during system suspend (but not in runtime PM);
|
|
* the state will be updated at resume. Also since the ELD and
|
|
* connection states are updated in anyway at the end of the resume,
|
|
* we can skip it when received during PM process.
|
|
*/
|
|
if (snd_power_get_state(component->card->snd_card) !=
|
|
SNDRV_CTL_POWER_D0)
|
|
return;
|
|
|
|
if (atomic_read(&hdev->in_pm))
|
|
return;
|
|
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
if (pin->nid != pin_nid)
|
|
continue;
|
|
|
|
/* In case of non MST pin, pipe is -1 */
|
|
if (pipe == -1) {
|
|
pin->mst_capable = false;
|
|
/* if not MST, default is port[0] */
|
|
hport = &pin->ports[0];
|
|
} else {
|
|
for (i = 0; i < pin->num_ports; i++) {
|
|
pin->mst_capable = true;
|
|
if (pin->ports[i].id == pipe) {
|
|
hport = &pin->ports[i];
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (hport)
|
|
hdac_hdmi_present_sense(pin, hport);
|
|
}
|
|
|
|
}
|
|
|
|
static struct drm_audio_component_audio_ops aops = {
|
|
.pin2port = hdac_hdmi_pin2port,
|
|
.pin_eld_notify = hdac_hdmi_eld_notify_cb,
|
|
};
|
|
|
|
static struct snd_pcm *hdac_hdmi_get_pcm_from_id(struct snd_soc_card *card,
|
|
int device)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd;
|
|
|
|
for_each_card_rtds(card, rtd) {
|
|
if (rtd->pcm && (rtd->pcm->device == device))
|
|
return rtd->pcm;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* create jack pin kcontrols */
|
|
static int create_fill_jack_kcontrols(struct snd_soc_card *card,
|
|
struct hdac_device *hdev)
|
|
{
|
|
struct hdac_hdmi_pin *pin;
|
|
struct snd_kcontrol_new *kc;
|
|
char *name;
|
|
int i = 0, j;
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct snd_soc_component *component = hdmi->component;
|
|
|
|
kc = devm_kcalloc(component->dev, hdmi->num_ports,
|
|
sizeof(*kc), GFP_KERNEL);
|
|
|
|
if (!kc)
|
|
return -ENOMEM;
|
|
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
for (j = 0; j < pin->num_ports; j++) {
|
|
name = devm_kasprintf(component->dev, GFP_KERNEL,
|
|
"hif%d-%d Jack",
|
|
pin->nid, pin->ports[j].id);
|
|
if (!name)
|
|
return -ENOMEM;
|
|
|
|
kc[i].name = devm_kasprintf(component->dev, GFP_KERNEL,
|
|
"%s Switch", name);
|
|
if (!kc[i].name)
|
|
return -ENOMEM;
|
|
|
|
kc[i].private_value = (unsigned long)name;
|
|
kc[i].iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
kc[i].access = 0;
|
|
kc[i].info = snd_soc_dapm_info_pin_switch;
|
|
kc[i].put = snd_soc_dapm_put_pin_switch;
|
|
kc[i].get = snd_soc_dapm_get_pin_switch;
|
|
i++;
|
|
}
|
|
}
|
|
|
|
return snd_soc_add_card_controls(card, kc, i);
|
|
}
|
|
|
|
int hdac_hdmi_jack_port_init(struct snd_soc_component *component,
|
|
struct snd_soc_dapm_context *dapm)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
|
|
struct hdac_device *hdev = hdmi->hdev;
|
|
struct hdac_hdmi_pin *pin;
|
|
struct snd_soc_dapm_widget *widgets;
|
|
struct snd_soc_dapm_route *route;
|
|
char w_name[NAME_SIZE];
|
|
int i = 0, j, ret;
|
|
|
|
widgets = devm_kcalloc(dapm->dev, hdmi->num_ports,
|
|
sizeof(*widgets), GFP_KERNEL);
|
|
|
|
if (!widgets)
|
|
return -ENOMEM;
|
|
|
|
route = devm_kcalloc(dapm->dev, hdmi->num_ports,
|
|
sizeof(*route), GFP_KERNEL);
|
|
if (!route)
|
|
return -ENOMEM;
|
|
|
|
/* create Jack DAPM widget */
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
for (j = 0; j < pin->num_ports; j++) {
|
|
snprintf(w_name, sizeof(w_name), "hif%d-%d Jack",
|
|
pin->nid, pin->ports[j].id);
|
|
|
|
ret = hdac_hdmi_fill_widget_info(dapm->dev, &widgets[i],
|
|
snd_soc_dapm_spk, NULL,
|
|
w_name, NULL, NULL, 0, NULL, 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
pin->ports[j].jack_pin = widgets[i].name;
|
|
pin->ports[j].dapm = dapm;
|
|
|
|
/* add to route from Jack widget to output */
|
|
hdac_hdmi_fill_route(&route[i], pin->ports[j].jack_pin,
|
|
NULL, pin->ports[j].output_pin, NULL);
|
|
|
|
i++;
|
|
}
|
|
}
|
|
|
|
/* Add Route from Jack widget to the output widget */
|
|
ret = snd_soc_dapm_new_controls(dapm, widgets, hdmi->num_ports);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_soc_dapm_add_routes(dapm, route, hdmi->num_ports);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = snd_soc_dapm_new_widgets(dapm->card);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Add Jack Pin switch Kcontrol */
|
|
ret = create_fill_jack_kcontrols(dapm->card, hdev);
|
|
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* default set the Jack Pin switch to OFF */
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
for (j = 0; j < pin->num_ports; j++)
|
|
snd_soc_dapm_disable_pin(pin->ports[j].dapm,
|
|
pin->ports[j].jack_pin);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(hdac_hdmi_jack_port_init);
|
|
|
|
int hdac_hdmi_jack_init(struct snd_soc_dai *dai, int device,
|
|
struct snd_soc_jack *jack)
|
|
{
|
|
struct snd_soc_component *component = dai->component;
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
|
|
struct hdac_device *hdev = hdmi->hdev;
|
|
struct hdac_hdmi_pcm *pcm;
|
|
struct snd_pcm *snd_pcm;
|
|
int err;
|
|
|
|
/*
|
|
* this is a new PCM device, create new pcm and
|
|
* add to the pcm list
|
|
*/
|
|
pcm = devm_kzalloc(&hdev->dev, sizeof(*pcm), GFP_KERNEL);
|
|
if (!pcm)
|
|
return -ENOMEM;
|
|
pcm->pcm_id = device;
|
|
pcm->cvt = hdmi->dai_map[dai->id].cvt;
|
|
pcm->jack_event = 0;
|
|
pcm->jack = jack;
|
|
mutex_init(&pcm->lock);
|
|
INIT_LIST_HEAD(&pcm->port_list);
|
|
snd_pcm = hdac_hdmi_get_pcm_from_id(dai->component->card, device);
|
|
if (snd_pcm) {
|
|
err = snd_hdac_add_chmap_ctls(snd_pcm, device, &hdmi->chmap);
|
|
if (err < 0) {
|
|
dev_err(&hdev->dev,
|
|
"chmap control add failed with err: %d for pcm: %d\n",
|
|
err, device);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/* add control for ELD Bytes */
|
|
err = hdac_hdmi_create_eld_ctl(component, pcm);
|
|
if (err < 0) {
|
|
dev_err(&hdev->dev,
|
|
"eld control add failed with err: %d for pcm: %d\n",
|
|
err, device);
|
|
return err;
|
|
}
|
|
|
|
list_add_tail(&pcm->head, &hdmi->pcm_list);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(hdac_hdmi_jack_init);
|
|
|
|
static void hdac_hdmi_present_sense_all_pins(struct hdac_device *hdev,
|
|
struct hdac_hdmi_priv *hdmi, bool detect_pin_caps)
|
|
{
|
|
int i;
|
|
struct hdac_hdmi_pin *pin;
|
|
|
|
list_for_each_entry(pin, &hdmi->pin_list, head) {
|
|
if (detect_pin_caps) {
|
|
|
|
if (hdac_hdmi_get_port_len(hdev, pin->nid) == 0)
|
|
pin->mst_capable = false;
|
|
else
|
|
pin->mst_capable = true;
|
|
}
|
|
|
|
for (i = 0; i < pin->num_ports; i++) {
|
|
if (!pin->mst_capable && i > 0)
|
|
continue;
|
|
|
|
hdac_hdmi_present_sense(pin, &pin->ports[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int hdmi_codec_probe(struct snd_soc_component *component)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
|
|
struct hdac_device *hdev = hdmi->hdev;
|
|
struct snd_soc_dapm_context *dapm =
|
|
snd_soc_component_get_dapm(component);
|
|
struct hdac_ext_link *hlink;
|
|
int ret;
|
|
|
|
hdmi->component = component;
|
|
|
|
/*
|
|
* hold the ref while we probe, also no need to drop the ref on
|
|
* exit, we call pm_runtime_suspend() so that will do for us
|
|
*/
|
|
hlink = snd_hdac_ext_bus_get_hlink_by_name(hdev->bus, dev_name(&hdev->dev));
|
|
if (!hlink) {
|
|
dev_err(&hdev->dev, "hdac link not found\n");
|
|
return -EIO;
|
|
}
|
|
|
|
snd_hdac_ext_bus_link_get(hdev->bus, hlink);
|
|
|
|
ret = create_fill_widget_route_map(dapm);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
aops.audio_ptr = hdev;
|
|
ret = snd_hdac_acomp_register_notifier(hdev->bus, &aops);
|
|
if (ret < 0) {
|
|
dev_err(&hdev->dev, "notifier register failed: err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
hdac_hdmi_present_sense_all_pins(hdev, hdmi, true);
|
|
/* Imp: Store the card pointer in hda_codec */
|
|
hdmi->card = dapm->card->snd_card;
|
|
|
|
/*
|
|
* Setup a device_link between card device and HDMI codec device.
|
|
* The card device is the consumer and the HDMI codec device is
|
|
* the supplier. With this setting, we can make sure that the audio
|
|
* domain in display power will be always turned on before operating
|
|
* on the HDMI audio codec registers.
|
|
* Let's use the flag DL_FLAG_AUTOREMOVE_CONSUMER. This can make
|
|
* sure the device link is freed when the machine driver is removed.
|
|
*/
|
|
device_link_add(component->card->dev, &hdev->dev, DL_FLAG_RPM_ACTIVE |
|
|
DL_FLAG_AUTOREMOVE_CONSUMER);
|
|
/*
|
|
* hdac_device core already sets the state to active and calls
|
|
* get_noresume. So enable runtime and set the device to suspend.
|
|
*/
|
|
pm_runtime_enable(&hdev->dev);
|
|
pm_runtime_put(&hdev->dev);
|
|
pm_runtime_suspend(&hdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hdmi_codec_remove(struct snd_soc_component *component)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = snd_soc_component_get_drvdata(component);
|
|
struct hdac_device *hdev = hdmi->hdev;
|
|
int ret;
|
|
|
|
ret = snd_hdac_acomp_register_notifier(hdev->bus, NULL);
|
|
if (ret < 0)
|
|
dev_err(&hdev->dev, "notifier unregister failed: err: %d\n",
|
|
ret);
|
|
|
|
pm_runtime_disable(&hdev->dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int hdmi_codec_resume(struct device *dev)
|
|
{
|
|
struct hdac_device *hdev = dev_to_hdac_dev(dev);
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
int ret;
|
|
|
|
ret = pm_runtime_force_resume(dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
/*
|
|
* As the ELD notify callback request is not entertained while the
|
|
* device is in suspend state. Need to manually check detection of
|
|
* all pins here. pin capablity change is not support, so use the
|
|
* already set pin caps.
|
|
*
|
|
* NOTE: this is safe to call even if the codec doesn't actually resume.
|
|
* The pin check involves only with DRM audio component hooks, so it
|
|
* works even if the HD-audio side is still dreaming peacefully.
|
|
*/
|
|
hdac_hdmi_present_sense_all_pins(hdev, hdmi, false);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define hdmi_codec_resume NULL
|
|
#endif
|
|
|
|
static const struct snd_soc_component_driver hdmi_hda_codec = {
|
|
.probe = hdmi_codec_probe,
|
|
.remove = hdmi_codec_remove,
|
|
.use_pmdown_time = 1,
|
|
.endianness = 1,
|
|
};
|
|
|
|
static void hdac_hdmi_get_chmap(struct hdac_device *hdev, int pcm_idx,
|
|
unsigned char *chmap)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
|
|
|
|
memcpy(chmap, pcm->chmap, ARRAY_SIZE(pcm->chmap));
|
|
}
|
|
|
|
static void hdac_hdmi_set_chmap(struct hdac_device *hdev, int pcm_idx,
|
|
unsigned char *chmap, int prepared)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
|
|
struct hdac_hdmi_port *port;
|
|
|
|
if (!pcm)
|
|
return;
|
|
|
|
if (list_empty(&pcm->port_list))
|
|
return;
|
|
|
|
mutex_lock(&pcm->lock);
|
|
pcm->chmap_set = true;
|
|
memcpy(pcm->chmap, chmap, ARRAY_SIZE(pcm->chmap));
|
|
list_for_each_entry(port, &pcm->port_list, head)
|
|
if (prepared)
|
|
hdac_hdmi_setup_audio_infoframe(hdev, pcm, port);
|
|
mutex_unlock(&pcm->lock);
|
|
}
|
|
|
|
static bool is_hdac_hdmi_pcm_attached(struct hdac_device *hdev, int pcm_idx)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
|
|
|
|
if (!pcm)
|
|
return false;
|
|
|
|
if (list_empty(&pcm->port_list))
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
static int hdac_hdmi_get_spk_alloc(struct hdac_device *hdev, int pcm_idx)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pcm *pcm = get_hdmi_pcm_from_id(hdmi, pcm_idx);
|
|
struct hdac_hdmi_port *port;
|
|
|
|
if (!pcm)
|
|
return 0;
|
|
|
|
if (list_empty(&pcm->port_list))
|
|
return 0;
|
|
|
|
port = list_first_entry(&pcm->port_list, struct hdac_hdmi_port, head);
|
|
|
|
if (!port || !port->eld.eld_valid)
|
|
return 0;
|
|
|
|
return port->eld.info.spk_alloc;
|
|
}
|
|
|
|
static struct hdac_hdmi_drv_data intel_glk_drv_data = {
|
|
.vendor_nid = INTEL_GLK_VENDOR_NID,
|
|
};
|
|
|
|
static struct hdac_hdmi_drv_data intel_drv_data = {
|
|
.vendor_nid = INTEL_VENDOR_NID,
|
|
};
|
|
|
|
static int hdac_hdmi_dev_probe(struct hdac_device *hdev)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi_priv;
|
|
struct snd_soc_dai_driver *hdmi_dais = NULL;
|
|
struct hdac_ext_link *hlink;
|
|
int num_dais = 0;
|
|
int ret;
|
|
struct hdac_driver *hdrv = drv_to_hdac_driver(hdev->dev.driver);
|
|
const struct hda_device_id *hdac_id = hdac_get_device_id(hdev, hdrv);
|
|
|
|
/* hold the ref while we probe */
|
|
hlink = snd_hdac_ext_bus_get_hlink_by_name(hdev->bus, dev_name(&hdev->dev));
|
|
if (!hlink) {
|
|
dev_err(&hdev->dev, "hdac link not found\n");
|
|
return -EIO;
|
|
}
|
|
|
|
snd_hdac_ext_bus_link_get(hdev->bus, hlink);
|
|
|
|
hdmi_priv = devm_kzalloc(&hdev->dev, sizeof(*hdmi_priv), GFP_KERNEL);
|
|
if (hdmi_priv == NULL)
|
|
return -ENOMEM;
|
|
|
|
snd_hdac_register_chmap_ops(hdev, &hdmi_priv->chmap);
|
|
hdmi_priv->chmap.ops.get_chmap = hdac_hdmi_get_chmap;
|
|
hdmi_priv->chmap.ops.set_chmap = hdac_hdmi_set_chmap;
|
|
hdmi_priv->chmap.ops.is_pcm_attached = is_hdac_hdmi_pcm_attached;
|
|
hdmi_priv->chmap.ops.get_spk_alloc = hdac_hdmi_get_spk_alloc;
|
|
hdmi_priv->hdev = hdev;
|
|
|
|
if (!hdac_id)
|
|
return -ENODEV;
|
|
|
|
if (hdac_id->driver_data)
|
|
hdmi_priv->drv_data =
|
|
(struct hdac_hdmi_drv_data *)hdac_id->driver_data;
|
|
else
|
|
hdmi_priv->drv_data = &intel_drv_data;
|
|
|
|
dev_set_drvdata(&hdev->dev, hdmi_priv);
|
|
|
|
INIT_LIST_HEAD(&hdmi_priv->pin_list);
|
|
INIT_LIST_HEAD(&hdmi_priv->cvt_list);
|
|
INIT_LIST_HEAD(&hdmi_priv->pcm_list);
|
|
mutex_init(&hdmi_priv->pin_mutex);
|
|
|
|
/*
|
|
* Turned off in the runtime_suspend during the first explicit
|
|
* pm_runtime_suspend call.
|
|
*/
|
|
snd_hdac_display_power(hdev->bus, hdev->addr, true);
|
|
|
|
ret = hdac_hdmi_parse_and_map_nid(hdev, &hdmi_dais, &num_dais);
|
|
if (ret < 0) {
|
|
dev_err(&hdev->dev,
|
|
"Failed in parse and map nid with err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
snd_hdac_refresh_widgets(hdev);
|
|
|
|
/* ASoC specific initialization */
|
|
ret = devm_snd_soc_register_component(&hdev->dev, &hdmi_hda_codec,
|
|
hdmi_dais, num_dais);
|
|
|
|
snd_hdac_ext_bus_link_put(hdev->bus, hlink);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void clear_dapm_works(struct hdac_device *hdev)
|
|
{
|
|
struct hdac_hdmi_priv *hdmi = hdev_to_hdmi_priv(hdev);
|
|
struct hdac_hdmi_pin *pin;
|
|
int i;
|
|
|
|
list_for_each_entry(pin, &hdmi->pin_list, head)
|
|
for (i = 0; i < pin->num_ports; i++)
|
|
cancel_work_sync(&pin->ports[i].dapm_work);
|
|
}
|
|
|
|
static int hdac_hdmi_dev_remove(struct hdac_device *hdev)
|
|
{
|
|
clear_dapm_works(hdev);
|
|
snd_hdac_display_power(hdev->bus, hdev->addr, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int hdac_hdmi_runtime_suspend(struct device *dev)
|
|
{
|
|
struct hdac_device *hdev = dev_to_hdac_dev(dev);
|
|
struct hdac_bus *bus = hdev->bus;
|
|
struct hdac_ext_link *hlink;
|
|
|
|
dev_dbg(dev, "Enter: %s\n", __func__);
|
|
|
|
/* controller may not have been initialized for the first time */
|
|
if (!bus)
|
|
return 0;
|
|
|
|
/*
|
|
* Power down afg.
|
|
* codec_read is preferred over codec_write to set the power state.
|
|
* This way verb is send to set the power state and response
|
|
* is received. So setting power state is ensured without using loop
|
|
* to read the state.
|
|
*/
|
|
snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE,
|
|
AC_PWRST_D3);
|
|
|
|
hlink = snd_hdac_ext_bus_get_hlink_by_name(bus, dev_name(dev));
|
|
if (!hlink) {
|
|
dev_err(dev, "hdac link not found\n");
|
|
return -EIO;
|
|
}
|
|
|
|
snd_hdac_codec_link_down(hdev);
|
|
snd_hdac_ext_bus_link_put(bus, hlink);
|
|
|
|
snd_hdac_display_power(bus, hdev->addr, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hdac_hdmi_runtime_resume(struct device *dev)
|
|
{
|
|
struct hdac_device *hdev = dev_to_hdac_dev(dev);
|
|
struct hdac_bus *bus = hdev->bus;
|
|
struct hdac_ext_link *hlink;
|
|
|
|
dev_dbg(dev, "Enter: %s\n", __func__);
|
|
|
|
/* controller may not have been initialized for the first time */
|
|
if (!bus)
|
|
return 0;
|
|
|
|
hlink = snd_hdac_ext_bus_get_hlink_by_name(bus, dev_name(dev));
|
|
if (!hlink) {
|
|
dev_err(dev, "hdac link not found\n");
|
|
return -EIO;
|
|
}
|
|
|
|
snd_hdac_ext_bus_link_get(bus, hlink);
|
|
snd_hdac_codec_link_up(hdev);
|
|
|
|
snd_hdac_display_power(bus, hdev->addr, true);
|
|
|
|
hdac_hdmi_skl_enable_all_pins(hdev);
|
|
hdac_hdmi_skl_enable_dp12(hdev);
|
|
|
|
/* Power up afg */
|
|
snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE,
|
|
AC_PWRST_D0);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define hdac_hdmi_runtime_suspend NULL
|
|
#define hdac_hdmi_runtime_resume NULL
|
|
#endif
|
|
|
|
static const struct dev_pm_ops hdac_hdmi_pm = {
|
|
SET_RUNTIME_PM_OPS(hdac_hdmi_runtime_suspend, hdac_hdmi_runtime_resume, NULL)
|
|
SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, hdmi_codec_resume)
|
|
};
|
|
|
|
static const struct hda_device_id hdmi_list[] = {
|
|
HDA_CODEC_EXT_ENTRY(0x80862809, 0x100000, "Skylake HDMI", 0),
|
|
HDA_CODEC_EXT_ENTRY(0x8086280a, 0x100000, "Broxton HDMI", 0),
|
|
HDA_CODEC_EXT_ENTRY(0x8086280b, 0x100000, "Kabylake HDMI", 0),
|
|
HDA_CODEC_EXT_ENTRY(0x8086280c, 0x100000, "Cannonlake HDMI",
|
|
&intel_glk_drv_data),
|
|
HDA_CODEC_EXT_ENTRY(0x8086280d, 0x100000, "Geminilake HDMI",
|
|
&intel_glk_drv_data),
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(hdaudio, hdmi_list);
|
|
|
|
static struct hdac_driver hdmi_driver = {
|
|
.driver = {
|
|
.name = "HDMI HDA Codec",
|
|
.pm = &hdac_hdmi_pm,
|
|
},
|
|
.id_table = hdmi_list,
|
|
.probe = hdac_hdmi_dev_probe,
|
|
.remove = hdac_hdmi_dev_remove,
|
|
};
|
|
|
|
static int __init hdmi_init(void)
|
|
{
|
|
return snd_hda_ext_driver_register(&hdmi_driver);
|
|
}
|
|
|
|
static void __exit hdmi_exit(void)
|
|
{
|
|
snd_hda_ext_driver_unregister(&hdmi_driver);
|
|
}
|
|
|
|
module_init(hdmi_init);
|
|
module_exit(hdmi_exit);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("HDMI HD codec");
|
|
MODULE_AUTHOR("Samreen Nilofer<samreen.nilofer@intel.com>");
|
|
MODULE_AUTHOR("Subhransu S. Prusty<subhransu.s.prusty@intel.com>");
|