mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 16:24:13 +08:00
8d7868c41d
- Add new IOCTLs to the int340x thermal driver to allow user space to
retrieve the Passive v2 thermal table (Srinivas Pandruvada).
- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
Dybcio).
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki).
- Add DT bindings for QCom ipq9574 (Praveenkumar I).
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren).
- Allow selecting the bang-bang governor as default (Thierry Reding).
- Refactor and prepare the code to set the scene for RCar Gen4 (Wolfram
Sang).
- Clean up and fix the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold).
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo).
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET).
- Prevent setting up undocumented registers, enable the only described
sensors and add the version 2.1 on the Qoriq sensor (Peng Fan).
- Add DT bindings and support for the Armada AP807 (Alex Leibovich).
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano).
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König).
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li).
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai).
- Use the dev_err_probe() function in the QCom tsens alarm driver (Luca
Weiss).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmSZxuYSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxVicP/0Gl7fQc2l2/AEwe+FuwZz8xERhbLc4s
kSXVIJ1B6GScefUmLBqDZoWokVqP4gXgjTnYdqZNJmnCo+hP9i6VzVjVXSI2eNe7
426cJd7la2K0zWcjsw/apdGa81Btnf0IjIMjeWiZOPVkRE6UmnHBwG52C5Hd+1pa
EJaRcxv37MvrRKgzwUV+4WSBd5p1v3UrElzs10DXt+mVfRjsV7Y3bxnfW0+kh1sK
3J/AzPXx1v6e6mnKQQQAso0r1g22n/lfh9C7VQT01fXt704PLx1jNr4vtlGhCJkQ
sRlodAx+6uSX2GyeVs9hKOPZees3lY9VcZOI3c4g0Sy2ad4Hl7QDRbMmMUiiEVNZ
fmiIs26RbfeRvl2lNDEYxLxsBaMva4rerVuOlRjkKeXDboa/TyZ2/MwvaE/uaxT7
yWBoqoY67aPfyS8YgSu/DqRK60J+6PShaYeOJ4deYA6skctCe1v7nRJu07n62RBd
JuPUUifiBb6jpxDPCRBHLxwUIMK9gzJIRM74ieZs/XSG56v4dJR2e8GmHZLoiLPV
cc/uyHopQc75z7fYNDHdu7EHzUUGsjI6A9cNoCcdG86+b/pUEXTBLxpEuOv3bXfm
DtpoS2O0PEJtblTmS4HFJJuJ3I1qUzJZgo/KmwmFEcXOfo2KEqVzcleSr1t+zAbR
rCTcgVTaYpt4
=dtvf
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These extend the int340x thermal driver, add thermal DT bindings for
some Qcom platforms, add DT bindings and support for Armada AP807 and
MSM8909, allow selecting the bang-bang thermal governor as the default
one, address issues in several thermal drivers for ARM platforms and
clean up code.
Specifics:
- Add new IOCTLs to the int340x thermal driver to allow user space to
retrieve the Passive v2 thermal table (Srinivas Pandruvada)
- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms
(Konrad Dybcio)
- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
- Add DT bindings for QCom ipq9574 (Praveenkumar I)
- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
- Allow selecting the bang-bang governor as default (Thierry Reding)
- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)
- Clean up and fix the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)
- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)
- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)
- Prevent setting up undocumented registers, enable the only
described sensors and add the version 2.1 on the Qoriq sensor (Peng
Fan)
- Add DT bindings and support for the Armada AP807 (Alex Leibovich)
- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)
- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)
- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)
- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)"
* tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
thermal/drivers/qcom/temp-alarm: Use dev_err_probe
thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
thermal/drivers/qcom: Remove redundant msg at probe time
thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
thermal/drivers/stm32: Convert to platform remove callback returning void
net/mlx5: Update the driver with the recent thermal changes
thermal/drivers/armada: Add support for AP807 thermal data
dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
thermal/drivers/qoriq: Support version 2.1
thermal/drivers/qoriq: Only enable supported sensors
thermal/drivers/qoriq: No need to program site adjustment register
thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
...
|
||
|---|---|---|
| .. | ||
| broadcom | ||
| intel | ||
| mediatek | ||
| qcom | ||
| samsung | ||
| st | ||
| tegra | ||
| ti-soc-thermal | ||
| amlogic_thermal.c | ||
| armada_thermal.c | ||
| cpufreq_cooling.c | ||
| cpuidle_cooling.c | ||
| da9062-thermal.c | ||
| db8500_thermal.c | ||
| devfreq_cooling.c | ||
| dove_thermal.c | ||
| gov_bang_bang.c | ||
| gov_fair_share.c | ||
| gov_power_allocator.c | ||
| gov_step_wise.c | ||
| gov_user_space.c | ||
| hisi_thermal.c | ||
| imx8mm_thermal.c | ||
| imx_sc_thermal.c | ||
| imx_thermal.c | ||
| k3_bandgap.c | ||
| k3_j72xx_bandgap.c | ||
| Kconfig | ||
| khadas_mcu_fan.c | ||
| kirkwood_thermal.c | ||
| Makefile | ||
| max77620_thermal.c | ||
| qoriq_thermal.c | ||
| rcar_gen3_thermal.c | ||
| rcar_thermal.c | ||
| rockchip_thermal.c | ||
| rzg2l_thermal.c | ||
| spear_thermal.c | ||
| sprd_thermal.c | ||
| sun8i_thermal.c | ||
| thermal_acpi.c | ||
| thermal_core.c | ||
| thermal_core.h | ||
| thermal_helpers.c | ||
| thermal_hwmon.c | ||
| thermal_hwmon.h | ||
| thermal_mmio.c | ||
| thermal_netlink.c | ||
| thermal_netlink.h | ||
| thermal_of.c | ||
| thermal_sysfs.c | ||
| thermal_trace_ipa.h | ||
| thermal_trace.h | ||
| thermal_trip.c | ||
| thermal-generic-adc.c | ||
| uniphier_thermal.c | ||