Magnus Damm 9f26e659d8 sh: kfr2r09 board support - LCDC panel ... This patch adds support for the WQVGA LCD display used by the KFR2R09 board. The LCD module is a TX07D34VM0AAA made by Hitachi, and this module is made up by a R61517 chip together with a 240x400 pixel display. The screen is attached to the SuperH Mobile LCDC using a 18-bit SYS bus. The register settings used by the SYS panel setup code are based on an out-of-tree driver which apart from duplicating all LCDC driver code and writing to non-existing hardware registers also never was posted for upstream merge. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>		2009-08-07 03:55:29 +09:00
..
mach-cayman	sh: Move out cayman-specific panic handler code to its own file.	2009-05-08 17:41:59 +09:00
mach-dreamcast	sh: add init member to pci_channel data	2009-04-16 16:00:12 +09:00
mach-edosk7705	sh: mach-edosk7705: Fix up edosk7705 so it all builds again.	2008-12-22 18:44:45 +09:00
mach-highlander	usb: m66592-udc platform data on_chip support	2009-07-23 13:04:15 +09:00
mach-hp6xx	sh: fix the HD64461 level-triggered interrupts handling	2009-03-20 18:57:48 +09:00
mach-kfr2r09	sh: kfr2r09 board support - LCDC panel	2009-08-07 03:55:29 +09:00
mach-landisk	sh: More header path fixups for mach dir refactoring.	2008-07-29 22:10:01 +09:00
mach-lboxre2	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-microdev	sh: mach-microdev: Split out the fdc37c93xapm initialization code.	2008-12-22 18:44:45 +09:00
mach-migor	SH: convert migor to soc-camera as platform-device	2009-06-17 16:22:48 +09:00
mach-r2d	sh: mach-r2d: add physmap-flash support for R2D+ boards.	2009-04-27 17:54:41 +09:00
mach-rsk	sh: smsc911x support for the rsk7203 board	2009-06-16 05:57:07 +09:00
mach-sdk7780	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-se	sh: ms7724se: add 1280x720 lcdc output support	2009-08-04 14:41:22 +09:00
mach-sh03	sh: mach-sh03: Give the sh03 rtc its own spinlock.	2009-05-08 16:57:35 +09:00
mach-sh7763rdp	sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp	2009-03-17 15:20:59 +09:00
mach-snapgear	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-systemh	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-titan	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-x3proto	usb: m66592-udc platform data on_chip support	2009-07-23 13:04:15 +09:00
board-ap325rxa.c	SH: convert ap325rxa to soc-camera as platform-device	2009-06-17 16:22:41 +09:00
board-edosk7760.c	sh: edosk7760: Correct size of bootloader flash partition.	2008-09-21 10:32:29 +09:00
board-espt.c	sh: espt-giga board support	2009-03-17 15:18:52 +09:00
board-magicpanelr2.c	sh: convert magicpanelr2 platform to use smsc911x.	2009-01-21 17:42:25 +09:00
board-polaris.c	sh: add support for SMSC Polaris platform	2009-03-21 01:26:33 +09:00
board-sh7785lcr.c	sh: sh7785lcr: add platform data for r8a66597-hcd	2009-06-17 16:19:00 +09:00
board-shmin.c	sh: board-shmin: Convert shmin to use __set_io_port_base().	2008-12-22 18:44:45 +09:00
board-urquell.c	sh: urquell: Add system FPGA mode pin support.	2009-06-15 19:02:37 +09:00
Kconfig	sh: kfr2r09 board support - SCIF console	2009-07-23 13:15:18 +09:00
Makefile	sh: add support for SMSC Polaris platform	2009-03-21 01:26:33 +09:00