linux/drivers/pinctrl/qcom/pinctrl-lpass-lpi.c
Krzysztof Kozlowski 6ea5c72b04 pinctrl: qcom: lpass-lpi: allow slew rate bit in main pin config register
Existing Qualcomm SoCs have the LPASS pin controller slew rate control
in separate register, however this will change with upcoming Qualcomm
SoCs.  The slew rate will be part of the main register for pin
configuration, thus second device IO address space is not needed.

Prepare for supporting new SoCs by adding flag customizing the driver
behavior for slew rate.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231013145935.220945-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2023-11-14 08:44:40 +01:00

534 lines
13 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016-2019, The Linux Foundation. All rights reserved.
* Copyright (c) 2020 Linaro Ltd.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/gpio/driver.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/seq_file.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinmux.h>
#include "../pinctrl-utils.h"
#include "pinctrl-lpass-lpi.h"
#define MAX_NR_GPIO 23
#define GPIO_FUNC 0
#define MAX_LPI_NUM_CLKS 2
struct lpi_pinctrl {
struct device *dev;
struct pinctrl_dev *ctrl;
struct gpio_chip chip;
struct pinctrl_desc desc;
char __iomem *tlmm_base;
char __iomem *slew_base;
struct clk_bulk_data clks[MAX_LPI_NUM_CLKS];
/* Protects from concurrent register updates */
struct mutex lock;
DECLARE_BITMAP(ever_gpio, MAX_NR_GPIO);
const struct lpi_pinctrl_variant_data *data;
};
static int lpi_gpio_read(struct lpi_pinctrl *state, unsigned int pin,
unsigned int addr)
{
return ioread32(state->tlmm_base + LPI_TLMM_REG_OFFSET * pin + addr);
}
static int lpi_gpio_write(struct lpi_pinctrl *state, unsigned int pin,
unsigned int addr, unsigned int val)
{
iowrite32(val, state->tlmm_base + LPI_TLMM_REG_OFFSET * pin + addr);
return 0;
}
static const struct pinctrl_ops lpi_gpio_pinctrl_ops = {
.get_groups_count = pinctrl_generic_get_group_count,
.get_group_name = pinctrl_generic_get_group_name,
.get_group_pins = pinctrl_generic_get_group_pins,
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
.dt_free_map = pinctrl_utils_free_map,
};
static int lpi_gpio_get_functions_count(struct pinctrl_dev *pctldev)
{
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->data->nfunctions;
}
static const char *lpi_gpio_get_function_name(struct pinctrl_dev *pctldev,
unsigned int function)
{
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
return pctrl->data->functions[function].name;
}
static int lpi_gpio_get_function_groups(struct pinctrl_dev *pctldev,
unsigned int function,
const char *const **groups,
unsigned *const num_qgroups)
{
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
*groups = pctrl->data->functions[function].groups;
*num_qgroups = pctrl->data->functions[function].ngroups;
return 0;
}
static int lpi_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
unsigned int group)
{
struct lpi_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
const struct lpi_pingroup *g = &pctrl->data->groups[group];
u32 val;
int i, pin = g->pin;
for (i = 0; i < g->nfuncs; i++) {
if (g->funcs[i] == function)
break;
}
if (WARN_ON(i == g->nfuncs))
return -EINVAL;
mutex_lock(&pctrl->lock);
val = lpi_gpio_read(pctrl, pin, LPI_GPIO_CFG_REG);
/*
* If this is the first time muxing to GPIO and the direction is
* output, make sure that we're not going to be glitching the pin
* by reading the current state of the pin and setting it as the
* output.
*/
if (i == GPIO_FUNC && (val & LPI_GPIO_OE_MASK) &&
!test_and_set_bit(group, pctrl->ever_gpio)) {
u32 io_val = lpi_gpio_read(pctrl, group, LPI_GPIO_VALUE_REG);
if (io_val & LPI_GPIO_VALUE_IN_MASK) {
if (!(io_val & LPI_GPIO_VALUE_OUT_MASK))
lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG,
io_val | LPI_GPIO_VALUE_OUT_MASK);
} else {
if (io_val & LPI_GPIO_VALUE_OUT_MASK)
lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG,
io_val & ~LPI_GPIO_VALUE_OUT_MASK);
}
}
u32p_replace_bits(&val, i, LPI_GPIO_FUNCTION_MASK);
lpi_gpio_write(pctrl, pin, LPI_GPIO_CFG_REG, val);
mutex_unlock(&pctrl->lock);
return 0;
}
static const struct pinmux_ops lpi_gpio_pinmux_ops = {
.get_functions_count = lpi_gpio_get_functions_count,
.get_function_name = lpi_gpio_get_function_name,
.get_function_groups = lpi_gpio_get_function_groups,
.set_mux = lpi_gpio_set_mux,
};
static int lpi_config_get(struct pinctrl_dev *pctldev,
unsigned int pin, unsigned long *config)
{
unsigned int param = pinconf_to_config_param(*config);
struct lpi_pinctrl *state = dev_get_drvdata(pctldev->dev);
unsigned int arg = 0;
int is_out;
int pull;
u32 ctl_reg;
ctl_reg = lpi_gpio_read(state, pin, LPI_GPIO_CFG_REG);
is_out = ctl_reg & LPI_GPIO_OE_MASK;
pull = FIELD_GET(LPI_GPIO_PULL_MASK, ctl_reg);
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
if (pull == LPI_GPIO_BIAS_DISABLE)
arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
if (pull == LPI_GPIO_PULL_DOWN)
arg = 1;
break;
case PIN_CONFIG_BIAS_BUS_HOLD:
if (pull == LPI_GPIO_KEEPER)
arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_UP:
if (pull == LPI_GPIO_PULL_UP)
arg = 1;
break;
case PIN_CONFIG_INPUT_ENABLE:
case PIN_CONFIG_OUTPUT:
if (is_out)
arg = 1;
break;
default:
return -EINVAL;
}
*config = pinconf_to_config_packed(param, arg);
return 0;
}
static int lpi_config_set_slew_rate(struct lpi_pinctrl *pctrl,
const struct lpi_pingroup *g,
unsigned int group, unsigned int slew)
{
unsigned long sval;
void __iomem *reg;
int slew_offset;
if (slew > LPI_SLEW_RATE_MAX) {
dev_err(pctrl->dev, "invalid slew rate %u for pin: %d\n",
slew, group);
return -EINVAL;
}
slew_offset = g->slew_offset;
if (slew_offset == LPI_NO_SLEW)
return 0;
if (pctrl->data->flags & LPI_FLAG_SLEW_RATE_SAME_REG)
reg = pctrl->tlmm_base + LPI_TLMM_REG_OFFSET * group + LPI_GPIO_CFG_REG;
else
reg = pctrl->slew_base + LPI_SLEW_RATE_CTL_REG;
mutex_lock(&pctrl->lock);
sval = ioread32(reg);
sval &= ~(LPI_SLEW_RATE_MASK << slew_offset);
sval |= slew << slew_offset;
iowrite32(sval, reg);
mutex_unlock(&pctrl->lock);
return 0;
}
static int lpi_config_set(struct pinctrl_dev *pctldev, unsigned int group,
unsigned long *configs, unsigned int nconfs)
{
struct lpi_pinctrl *pctrl = dev_get_drvdata(pctldev->dev);
unsigned int param, arg, pullup = LPI_GPIO_BIAS_DISABLE, strength = 2;
bool value, output_enabled = false;
const struct lpi_pingroup *g;
int i, ret;
u32 val;
g = &pctrl->data->groups[group];
for (i = 0; i < nconfs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
pullup = LPI_GPIO_BIAS_DISABLE;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
pullup = LPI_GPIO_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_BUS_HOLD:
pullup = LPI_GPIO_KEEPER;
break;
case PIN_CONFIG_BIAS_PULL_UP:
pullup = LPI_GPIO_PULL_UP;
break;
case PIN_CONFIG_INPUT_ENABLE:
output_enabled = false;
break;
case PIN_CONFIG_OUTPUT:
output_enabled = true;
value = arg;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
strength = arg;
break;
case PIN_CONFIG_SLEW_RATE:
ret = lpi_config_set_slew_rate(pctrl, g, group, arg);
if (ret)
return ret;
break;
default:
return -EINVAL;
}
}
/*
* As per Hardware Programming Guide, when configuring pin as output,
* set the pin value before setting output-enable (OE).
*/
if (output_enabled) {
val = u32_encode_bits(value ? 1 : 0, LPI_GPIO_VALUE_OUT_MASK);
lpi_gpio_write(pctrl, group, LPI_GPIO_VALUE_REG, val);
}
mutex_lock(&pctrl->lock);
val = lpi_gpio_read(pctrl, group, LPI_GPIO_CFG_REG);
u32p_replace_bits(&val, pullup, LPI_GPIO_PULL_MASK);
u32p_replace_bits(&val, LPI_GPIO_DS_TO_VAL(strength),
LPI_GPIO_OUT_STRENGTH_MASK);
u32p_replace_bits(&val, output_enabled, LPI_GPIO_OE_MASK);
lpi_gpio_write(pctrl, group, LPI_GPIO_CFG_REG, val);
mutex_unlock(&pctrl->lock);
return 0;
}
static const struct pinconf_ops lpi_gpio_pinconf_ops = {
.is_generic = true,
.pin_config_group_get = lpi_config_get,
.pin_config_group_set = lpi_config_set,
};
static int lpi_gpio_direction_input(struct gpio_chip *chip, unsigned int pin)
{
struct lpi_pinctrl *state = gpiochip_get_data(chip);
unsigned long config;
config = pinconf_to_config_packed(PIN_CONFIG_INPUT_ENABLE, 1);
return lpi_config_set(state->ctrl, pin, &config, 1);
}
static int lpi_gpio_direction_output(struct gpio_chip *chip,
unsigned int pin, int val)
{
struct lpi_pinctrl *state = gpiochip_get_data(chip);
unsigned long config;
config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, val);
return lpi_config_set(state->ctrl, pin, &config, 1);
}
static int lpi_gpio_get(struct gpio_chip *chip, unsigned int pin)
{
struct lpi_pinctrl *state = gpiochip_get_data(chip);
return lpi_gpio_read(state, pin, LPI_GPIO_VALUE_REG) &
LPI_GPIO_VALUE_IN_MASK;
}
static void lpi_gpio_set(struct gpio_chip *chip, unsigned int pin, int value)
{
struct lpi_pinctrl *state = gpiochip_get_data(chip);
unsigned long config;
config = pinconf_to_config_packed(PIN_CONFIG_OUTPUT, value);
lpi_config_set(state->ctrl, pin, &config, 1);
}
#ifdef CONFIG_DEBUG_FS
#include <linux/seq_file.h>
static unsigned int lpi_regval_to_drive(u32 val)
{
return (val + 1) * 2;
}
static void lpi_gpio_dbg_show_one(struct seq_file *s,
struct pinctrl_dev *pctldev,
struct gpio_chip *chip,
unsigned int offset,
unsigned int gpio)
{
struct lpi_pinctrl *state = gpiochip_get_data(chip);
struct pinctrl_pin_desc pindesc;
unsigned int func;
int is_out;
int drive;
int pull;
u32 ctl_reg;
static const char * const pulls[] = {
"no pull",
"pull down",
"keeper",
"pull up"
};
pctldev = pctldev ? : state->ctrl;
pindesc = pctldev->desc->pins[offset];
ctl_reg = lpi_gpio_read(state, offset, LPI_GPIO_CFG_REG);
is_out = ctl_reg & LPI_GPIO_OE_MASK;
func = FIELD_GET(LPI_GPIO_FUNCTION_MASK, ctl_reg);
drive = FIELD_GET(LPI_GPIO_OUT_STRENGTH_MASK, ctl_reg);
pull = FIELD_GET(LPI_GPIO_PULL_MASK, ctl_reg);
seq_printf(s, " %-8s: %-3s %d", pindesc.name, is_out ? "out" : "in", func);
seq_printf(s, " %dmA", lpi_regval_to_drive(drive));
seq_printf(s, " %s", pulls[pull]);
}
static void lpi_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
{
unsigned int gpio = chip->base;
unsigned int i;
for (i = 0; i < chip->ngpio; i++, gpio++) {
lpi_gpio_dbg_show_one(s, NULL, chip, i, gpio);
seq_puts(s, "\n");
}
}
#else
#define lpi_gpio_dbg_show NULL
#endif
static const struct gpio_chip lpi_gpio_template = {
.direction_input = lpi_gpio_direction_input,
.direction_output = lpi_gpio_direction_output,
.get = lpi_gpio_get,
.set = lpi_gpio_set,
.request = gpiochip_generic_request,
.free = gpiochip_generic_free,
.dbg_show = lpi_gpio_dbg_show,
};
static int lpi_build_pin_desc_groups(struct lpi_pinctrl *pctrl)
{
int i, ret;
for (i = 0; i < pctrl->data->npins; i++) {
const struct pinctrl_pin_desc *pin_info = pctrl->desc.pins + i;
ret = pinctrl_generic_add_group(pctrl->ctrl, pin_info->name,
(int *)&pin_info->number, 1, NULL);
if (ret < 0)
goto err_pinctrl;
}
return 0;
err_pinctrl:
for (; i > 0; i--)
pinctrl_generic_remove_group(pctrl->ctrl, i - 1);
return ret;
}
int lpi_pinctrl_probe(struct platform_device *pdev)
{
const struct lpi_pinctrl_variant_data *data;
struct device *dev = &pdev->dev;
struct lpi_pinctrl *pctrl;
int ret;
pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
if (!pctrl)
return -ENOMEM;
platform_set_drvdata(pdev, pctrl);
data = of_device_get_match_data(dev);
if (!data)
return -EINVAL;
if (WARN_ON(data->npins > MAX_NR_GPIO))
return -EINVAL;
pctrl->data = data;
pctrl->dev = &pdev->dev;
pctrl->clks[0].id = "core";
pctrl->clks[1].id = "audio";
pctrl->tlmm_base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(pctrl->tlmm_base))
return dev_err_probe(dev, PTR_ERR(pctrl->tlmm_base),
"TLMM resource not provided\n");
if (!(data->flags & LPI_FLAG_SLEW_RATE_SAME_REG)) {
pctrl->slew_base = devm_platform_ioremap_resource(pdev, 1);
if (IS_ERR(pctrl->slew_base))
return dev_err_probe(dev, PTR_ERR(pctrl->slew_base),
"Slew resource not provided\n");
}
ret = devm_clk_bulk_get_optional(dev, MAX_LPI_NUM_CLKS, pctrl->clks);
if (ret)
return ret;
ret = clk_bulk_prepare_enable(MAX_LPI_NUM_CLKS, pctrl->clks);
if (ret)
return dev_err_probe(dev, ret, "Can't enable clocks\n");
pctrl->desc.pctlops = &lpi_gpio_pinctrl_ops;
pctrl->desc.pmxops = &lpi_gpio_pinmux_ops;
pctrl->desc.confops = &lpi_gpio_pinconf_ops;
pctrl->desc.owner = THIS_MODULE;
pctrl->desc.name = dev_name(dev);
pctrl->desc.pins = data->pins;
pctrl->desc.npins = data->npins;
pctrl->chip = lpi_gpio_template;
pctrl->chip.parent = dev;
pctrl->chip.base = -1;
pctrl->chip.ngpio = data->npins;
pctrl->chip.label = dev_name(dev);
pctrl->chip.can_sleep = false;
mutex_init(&pctrl->lock);
pctrl->ctrl = devm_pinctrl_register(dev, &pctrl->desc, pctrl);
if (IS_ERR(pctrl->ctrl)) {
ret = PTR_ERR(pctrl->ctrl);
dev_err(dev, "failed to add pin controller\n");
goto err_pinctrl;
}
ret = lpi_build_pin_desc_groups(pctrl);
if (ret)
goto err_pinctrl;
ret = devm_gpiochip_add_data(dev, &pctrl->chip, pctrl);
if (ret) {
dev_err(pctrl->dev, "can't add gpio chip\n");
goto err_pinctrl;
}
return 0;
err_pinctrl:
mutex_destroy(&pctrl->lock);
clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
return ret;
}
EXPORT_SYMBOL_GPL(lpi_pinctrl_probe);
void lpi_pinctrl_remove(struct platform_device *pdev)
{
struct lpi_pinctrl *pctrl = platform_get_drvdata(pdev);
int i;
mutex_destroy(&pctrl->lock);
clk_bulk_disable_unprepare(MAX_LPI_NUM_CLKS, pctrl->clks);
for (i = 0; i < pctrl->data->npins; i++)
pinctrl_generic_remove_group(pctrl->ctrl, i);
}
EXPORT_SYMBOL_GPL(lpi_pinctrl_remove);
MODULE_DESCRIPTION("QTI LPI GPIO pin control driver");
MODULE_LICENSE("GPL");