mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-24 03:24:55 +08:00
89214f009c
The BCM2835 contains a custom interrupt controller, which supports 72 interrupt sources using a 2-level register scheme. The interrupt controller, or the HW block containing it, is referred to occasionally as "armctrl" in the SoC documentation, hence the symbol naming in the code. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split as of 2012/09/08, and modified as follows: * s/bcm2708/bcm2835/. * Modified device tree vendor prefix. * Moved implementation to drivers/irchip/. * Added devicetree documentation, and hence removed list of IRQs from bcm2835.dtsi. * Changed shift in MAKE_HWIRQ() and HWIRQ_BANK() from 8 to 5 to reduce the size of the hwirq space, and pass the total size of the hwirq space to irq_domain_add_linear(), rather than just the number of valid hwirqs; the two are different due to the hwirq space being sparse. * Added the interrupt controller DT node to the top-level of the DT, rather than nesting it inside a /axi node. Hence, changed the reg value since /axi had a ranges property. This seems simpler to me, but I'm not sure if everyone will like this change or not. * Don't set struct irq_domain_ops.map = irq_domain_simple_map, hence removing the need to patch include/linux/irqdomain.h or kernel/irq/irqdomain.c. * Simplified armctrl_of_init() using of_iomap(). * Removed unused IS_VALID_BANK()/IS_VALID_IRQ() macros. * Renamed armctrl_handle_irq() to prevent possible symbol clashes. * Made armctrl_of_init() static. * Removed comment "Each bank is registered as a separate interrupt controller" since this is no longer true. * Removed FSF address from license header. * Added my name to copyright header. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
224 lines
6.6 KiB
C
224 lines
6.6 KiB
C
/*
|
|
* Copyright 2010 Broadcom
|
|
* Copyright 2012 Simon Arlott, Chris Boot, Stephen Warren
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Quirk 1: Shortcut interrupts don't set the bank 1/2 register pending bits
|
|
*
|
|
* If an interrupt fires on bank 1 that isn't in the shortcuts list, bit 8
|
|
* on bank 0 is set to signify that an interrupt in bank 1 has fired, and
|
|
* to look in the bank 1 status register for more information.
|
|
*
|
|
* If an interrupt fires on bank 1 that _is_ in the shortcuts list, its
|
|
* shortcut bit in bank 0 is set as well as its interrupt bit in the bank 1
|
|
* status register, but bank 0 bit 8 is _not_ set.
|
|
*
|
|
* Quirk 2: You can't mask the register 1/2 pending interrupts
|
|
*
|
|
* In a proper cascaded interrupt controller, the interrupt lines with
|
|
* cascaded interrupt controllers on them are just normal interrupt lines.
|
|
* You can mask the interrupts and get on with things. With this controller
|
|
* you can't do that.
|
|
*
|
|
* Quirk 3: The shortcut interrupts can't be (un)masked in bank 0
|
|
*
|
|
* Those interrupts that have shortcuts can only be masked/unmasked in
|
|
* their respective banks' enable/disable registers. Doing so in the bank 0
|
|
* enable/disable registers has no effect.
|
|
*
|
|
* The FIQ control register:
|
|
* Bits 0-6: IRQ (index in order of interrupts from banks 1, 2, then 0)
|
|
* Bit 7: Enable FIQ generation
|
|
* Bits 8+: Unused
|
|
*
|
|
* An interrupt must be disabled before configuring it for FIQ generation
|
|
* otherwise both handlers will fire at the same time!
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/irqchip/bcm2835.h>
|
|
|
|
#include <asm/exception.h>
|
|
|
|
/* Put the bank and irq (32 bits) into the hwirq */
|
|
#define MAKE_HWIRQ(b, n) ((b << 5) | (n))
|
|
#define HWIRQ_BANK(i) (i >> 5)
|
|
#define HWIRQ_BIT(i) BIT(i & 0x1f)
|
|
|
|
#define NR_IRQS_BANK0 8
|
|
#define BANK0_HWIRQ_MASK 0xff
|
|
/* Shortcuts can't be disabled so any unknown new ones need to be masked */
|
|
#define SHORTCUT1_MASK 0x00007c00
|
|
#define SHORTCUT2_MASK 0x001f8000
|
|
#define SHORTCUT_SHIFT 10
|
|
#define BANK1_HWIRQ BIT(8)
|
|
#define BANK2_HWIRQ BIT(9)
|
|
#define BANK0_VALID_MASK (BANK0_HWIRQ_MASK | BANK1_HWIRQ | BANK2_HWIRQ \
|
|
| SHORTCUT1_MASK | SHORTCUT2_MASK)
|
|
|
|
#define REG_FIQ_CONTROL 0x0c
|
|
|
|
#define NR_BANKS 3
|
|
#define IRQS_PER_BANK 32
|
|
|
|
static int reg_pending[] __initconst = { 0x00, 0x04, 0x08 };
|
|
static int reg_enable[] __initconst = { 0x18, 0x10, 0x14 };
|
|
static int reg_disable[] __initconst = { 0x24, 0x1c, 0x20 };
|
|
static int bank_irqs[] __initconst = { 8, 32, 32 };
|
|
|
|
static const int shortcuts[] = {
|
|
7, 9, 10, 18, 19, /* Bank 1 */
|
|
21, 22, 23, 24, 25, 30 /* Bank 2 */
|
|
};
|
|
|
|
struct armctrl_ic {
|
|
void __iomem *base;
|
|
void __iomem *pending[NR_BANKS];
|
|
void __iomem *enable[NR_BANKS];
|
|
void __iomem *disable[NR_BANKS];
|
|
struct irq_domain *domain;
|
|
};
|
|
|
|
static struct armctrl_ic intc __read_mostly;
|
|
|
|
static void armctrl_mask_irq(struct irq_data *d)
|
|
{
|
|
writel_relaxed(HWIRQ_BIT(d->hwirq), intc.disable[HWIRQ_BANK(d->hwirq)]);
|
|
}
|
|
|
|
static void armctrl_unmask_irq(struct irq_data *d)
|
|
{
|
|
writel_relaxed(HWIRQ_BIT(d->hwirq), intc.enable[HWIRQ_BANK(d->hwirq)]);
|
|
}
|
|
|
|
static struct irq_chip armctrl_chip = {
|
|
.name = "ARMCTRL-level",
|
|
.irq_mask = armctrl_mask_irq,
|
|
.irq_unmask = armctrl_unmask_irq
|
|
};
|
|
|
|
static int armctrl_xlate(struct irq_domain *d, struct device_node *ctrlr,
|
|
const u32 *intspec, unsigned int intsize,
|
|
unsigned long *out_hwirq, unsigned int *out_type)
|
|
{
|
|
if (WARN_ON(intsize != 2))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(intspec[0] >= NR_BANKS))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(intspec[1] >= IRQS_PER_BANK))
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(intspec[0] == 0 && intspec[1] >= NR_IRQS_BANK0))
|
|
return -EINVAL;
|
|
|
|
*out_hwirq = MAKE_HWIRQ(intspec[0], intspec[1]);
|
|
*out_type = IRQ_TYPE_NONE;
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_domain_ops armctrl_ops = {
|
|
.xlate = armctrl_xlate
|
|
};
|
|
|
|
static int __init armctrl_of_init(struct device_node *node,
|
|
struct device_node *parent)
|
|
{
|
|
void __iomem *base;
|
|
int irq, b, i;
|
|
|
|
base = of_iomap(node, 0);
|
|
if (!base)
|
|
panic("%s: unable to map IC registers\n",
|
|
node->full_name);
|
|
|
|
intc.domain = irq_domain_add_linear(node, MAKE_HWIRQ(NR_BANKS, 0),
|
|
&armctrl_ops, NULL);
|
|
if (!intc.domain)
|
|
panic("%s: unable to create IRQ domain\n", node->full_name);
|
|
|
|
for (b = 0; b < NR_BANKS; b++) {
|
|
intc.pending[b] = base + reg_pending[b];
|
|
intc.enable[b] = base + reg_enable[b];
|
|
intc.disable[b] = base + reg_disable[b];
|
|
|
|
for (i = 0; i < bank_irqs[b]; i++) {
|
|
irq = irq_create_mapping(intc.domain, MAKE_HWIRQ(b, i));
|
|
BUG_ON(irq <= 0);
|
|
irq_set_chip_and_handler(irq, &armctrl_chip,
|
|
handle_level_irq);
|
|
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id irq_of_match[] __initconst = {
|
|
{ .compatible = "brcm,bcm2835-armctrl-ic", .data = armctrl_of_init }
|
|
};
|
|
|
|
void __init bcm2835_init_irq(void)
|
|
{
|
|
of_irq_init(irq_of_match);
|
|
}
|
|
|
|
/*
|
|
* Handle each interrupt across the entire interrupt controller. This reads the
|
|
* status register before handling each interrupt, which is necessary given that
|
|
* handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
|
|
*/
|
|
|
|
static void armctrl_handle_bank(int bank, struct pt_regs *regs)
|
|
{
|
|
u32 stat, irq;
|
|
|
|
while ((stat = readl_relaxed(intc.pending[bank]))) {
|
|
irq = MAKE_HWIRQ(bank, ffs(stat) - 1);
|
|
handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
|
|
}
|
|
}
|
|
|
|
static void armctrl_handle_shortcut(int bank, struct pt_regs *regs,
|
|
u32 stat)
|
|
{
|
|
u32 irq = MAKE_HWIRQ(bank, shortcuts[ffs(stat >> SHORTCUT_SHIFT) - 1]);
|
|
handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
|
|
}
|
|
|
|
asmlinkage void __exception_irq_entry bcm2835_handle_irq(
|
|
struct pt_regs *regs)
|
|
{
|
|
u32 stat, irq;
|
|
|
|
while ((stat = readl_relaxed(intc.pending[0]) & BANK0_VALID_MASK)) {
|
|
if (stat & BANK0_HWIRQ_MASK) {
|
|
irq = MAKE_HWIRQ(0, ffs(stat & BANK0_HWIRQ_MASK) - 1);
|
|
handle_IRQ(irq_linear_revmap(intc.domain, irq), regs);
|
|
} else if (stat & SHORTCUT1_MASK) {
|
|
armctrl_handle_shortcut(1, regs, stat & SHORTCUT1_MASK);
|
|
} else if (stat & SHORTCUT2_MASK) {
|
|
armctrl_handle_shortcut(2, regs, stat & SHORTCUT2_MASK);
|
|
} else if (stat & BANK1_HWIRQ) {
|
|
armctrl_handle_bank(1, regs);
|
|
} else if (stat & BANK2_HWIRQ) {
|
|
armctrl_handle_bank(2, regs);
|
|
} else {
|
|
BUG();
|
|
}
|
|
}
|
|
}
|