mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-19 18:24:14 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
289 lines
8.8 KiB
C
289 lines
8.8 KiB
C
/*
|
|
* linux/drivers/video/virgefb.h -- CyberVision64 definitions for the
|
|
* text console driver.
|
|
*
|
|
* Copyright (c) 1998 Alan Bair
|
|
*
|
|
* This file is based on the initial port to Linux of grf_cvreg.h:
|
|
*
|
|
* Copyright (c) 1997 Antonio Santos
|
|
*
|
|
* The original work is from the NetBSD CyberVision 64 framebuffer driver
|
|
* and support files (grf_cv.c, grf_cvreg.h, ite_cv.c):
|
|
* Permission to use the source of this driver was obtained from the
|
|
* author Michael Teske by Alan Bair.
|
|
*
|
|
* Copyright (c) 1995 Michael Teske
|
|
*
|
|
* History:
|
|
*
|
|
*
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive
|
|
* for more details.
|
|
*/
|
|
|
|
/* Enhanced register mapping (MMIO mode) */
|
|
|
|
#define S3_CRTC_ADR 0x03d4
|
|
#define S3_CRTC_DATA 0x03d5
|
|
|
|
#define S3_REG_LOCK2 0x39
|
|
#define S3_HGC_MODE 0x45
|
|
|
|
#define S3_HWGC_ORGX_H 0x46
|
|
#define S3_HWGC_ORGX_L 0x47
|
|
#define S3_HWGC_ORGY_H 0x48
|
|
#define S3_HWGC_ORGY_L 0x49
|
|
#define S3_HWGC_DX 0x4e
|
|
#define S3_HWGC_DY 0x4f
|
|
|
|
#define S3_LAW_CTL 0x58
|
|
|
|
/**************************************************/
|
|
|
|
/*
|
|
* Defines for the used register addresses (mw)
|
|
*
|
|
* NOTE: There are some registers that have different addresses when
|
|
* in mono or color mode. We only support color mode, and thus
|
|
* some addresses won't work in mono-mode!
|
|
*
|
|
* General and VGA-registers taken from retina driver. Fixed a few
|
|
* bugs in it. (SR and GR read address is Port + 1, NOT Port)
|
|
*
|
|
*/
|
|
|
|
/* General Registers: */
|
|
#define GREG_MISC_OUTPUT_R 0x03CC
|
|
#define GREG_MISC_OUTPUT_W 0x03C2
|
|
#define GREG_FEATURE_CONTROL_R 0x03CA
|
|
#define GREG_FEATURE_CONTROL_W 0x03DA
|
|
#define GREG_INPUT_STATUS0_R 0x03C2
|
|
#define GREG_INPUT_STATUS1_R 0x03DA
|
|
|
|
/* Setup Registers: */
|
|
#define SREG_VIDEO_SUBS_ENABLE 0x03C3 /* virge */
|
|
|
|
/* Attribute Controller: */
|
|
#define ACT_ADDRESS 0x03C0
|
|
#define ACT_ADDRESS_R 0x03C1
|
|
#define ACT_ADDRESS_W 0x03C0
|
|
#define ACT_ADDRESS_RESET 0x03DA
|
|
#define ACT_ID_PALETTE0 0x00
|
|
#define ACT_ID_PALETTE1 0x01
|
|
#define ACT_ID_PALETTE2 0x02
|
|
#define ACT_ID_PALETTE3 0x03
|
|
#define ACT_ID_PALETTE4 0x04
|
|
#define ACT_ID_PALETTE5 0x05
|
|
#define ACT_ID_PALETTE6 0x06
|
|
#define ACT_ID_PALETTE7 0x07
|
|
#define ACT_ID_PALETTE8 0x08
|
|
#define ACT_ID_PALETTE9 0x09
|
|
#define ACT_ID_PALETTE10 0x0A
|
|
#define ACT_ID_PALETTE11 0x0B
|
|
#define ACT_ID_PALETTE12 0x0C
|
|
#define ACT_ID_PALETTE13 0x0D
|
|
#define ACT_ID_PALETTE14 0x0E
|
|
#define ACT_ID_PALETTE15 0x0F
|
|
#define ACT_ID_ATTR_MODE_CNTL 0x10
|
|
#define ACT_ID_OVERSCAN_COLOR 0x11
|
|
#define ACT_ID_COLOR_PLANE_ENA 0x12
|
|
#define ACT_ID_HOR_PEL_PANNING 0x13
|
|
#define ACT_ID_COLOR_SELECT 0x14 /* virge PX_PADD pixel padding register */
|
|
|
|
/* Graphics Controller: */
|
|
#define GCT_ADDRESS 0x03CE
|
|
#define GCT_ADDRESS_R 0x03CF
|
|
#define GCT_ADDRESS_W 0x03CF
|
|
#define GCT_ID_SET_RESET 0x00
|
|
#define GCT_ID_ENABLE_SET_RESET 0x01
|
|
#define GCT_ID_COLOR_COMPARE 0x02
|
|
#define GCT_ID_DATA_ROTATE 0x03
|
|
#define GCT_ID_READ_MAP_SELECT 0x04
|
|
#define GCT_ID_GRAPHICS_MODE 0x05
|
|
#define GCT_ID_MISC 0x06
|
|
#define GCT_ID_COLOR_XCARE 0x07
|
|
#define GCT_ID_BITMASK 0x08
|
|
|
|
/* Sequencer: */
|
|
#define SEQ_ADDRESS 0x03C4
|
|
#define SEQ_ADDRESS_R 0x03C5
|
|
#define SEQ_ADDRESS_W 0x03C5
|
|
#define SEQ_ID_RESET 0x00
|
|
#define SEQ_ID_CLOCKING_MODE 0x01
|
|
#define SEQ_ID_MAP_MASK 0x02
|
|
#define SEQ_ID_CHAR_MAP_SELECT 0x03
|
|
#define SEQ_ID_MEMORY_MODE 0x04
|
|
#define SEQ_ID_UNKNOWN1 0x05
|
|
#define SEQ_ID_UNKNOWN2 0x06
|
|
#define SEQ_ID_UNKNOWN3 0x07
|
|
/* S3 extensions */
|
|
#define SEQ_ID_UNLOCK_EXT 0x08
|
|
#define SEQ_ID_EXT_SEQ_REG9 0x09 /* b7 = 1 extended reg access by MMIO only */
|
|
#define SEQ_ID_BUS_REQ_CNTL 0x0A
|
|
#define SEQ_ID_EXT_MISC_SEQ 0x0B
|
|
#define SEQ_ID_UNKNOWN4 0x0C
|
|
#define SEQ_ID_EXT_SEQ 0x0D
|
|
#define SEQ_ID_UNKNOWN5 0x0E
|
|
#define SEQ_ID_UNKNOWN6 0x0F
|
|
#define SEQ_ID_MCLK_LO 0x10
|
|
#define SEQ_ID_MCLK_HI 0x11
|
|
#define SEQ_ID_DCLK_LO 0x12
|
|
#define SEQ_ID_DCLK_HI 0x13
|
|
#define SEQ_ID_CLKSYN_CNTL_1 0x14
|
|
#define SEQ_ID_CLKSYN_CNTL_2 0x15
|
|
#define SEQ_ID_CLKSYN_TEST_HI 0x16 /* reserved for S3 testing of the */
|
|
#define SEQ_ID_CLKSYN_TEST_LO 0x17 /* internal clock synthesizer */
|
|
#define SEQ_ID_RAMDAC_CNTL 0x18
|
|
#define SEQ_ID_MORE_MAGIC 0x1A
|
|
#define SEQ_ID_SIGNAL_SELECT 0x1C /* new for virge */
|
|
|
|
/* CRT Controller: */
|
|
#define CRT_ADDRESS 0x03D4
|
|
#define CRT_ADDRESS_R 0x03D5
|
|
#define CRT_ADDRESS_W 0x03D5
|
|
#define CRT_ID_HOR_TOTAL 0x00
|
|
#define CRT_ID_HOR_DISP_ENA_END 0x01
|
|
#define CRT_ID_START_HOR_BLANK 0x02
|
|
#define CRT_ID_END_HOR_BLANK 0x03
|
|
#define CRT_ID_START_HOR_RETR 0x04
|
|
#define CRT_ID_END_HOR_RETR 0x05
|
|
#define CRT_ID_VER_TOTAL 0x06
|
|
#define CRT_ID_OVERFLOW 0x07
|
|
#define CRT_ID_PRESET_ROW_SCAN 0x08
|
|
#define CRT_ID_MAX_SCAN_LINE 0x09
|
|
#define CRT_ID_CURSOR_START 0x0A
|
|
#define CRT_ID_CURSOR_END 0x0B
|
|
#define CRT_ID_START_ADDR_HIGH 0x0C
|
|
#define CRT_ID_START_ADDR_LOW 0x0D
|
|
#define CRT_ID_CURSOR_LOC_HIGH 0x0E
|
|
#define CRT_ID_CURSOR_LOC_LOW 0x0F
|
|
#define CRT_ID_START_VER_RETR 0x10
|
|
#define CRT_ID_END_VER_RETR 0x11
|
|
#define CRT_ID_VER_DISP_ENA_END 0x12
|
|
#define CRT_ID_SCREEN_OFFSET 0x13
|
|
#define CRT_ID_UNDERLINE_LOC 0x14
|
|
#define CRT_ID_START_VER_BLANK 0x15
|
|
#define CRT_ID_END_VER_BLANK 0x16
|
|
#define CRT_ID_MODE_CONTROL 0x17
|
|
#define CRT_ID_LINE_COMPARE 0x18
|
|
#define CRT_ID_GD_LATCH_RBACK 0x22
|
|
#define CRT_ID_ACT_TOGGLE_RBACK 0x24
|
|
#define CRT_ID_ACT_INDEX_RBACK 0x26
|
|
/* S3 extensions: S3 VGA Registers */
|
|
#define CRT_ID_DEVICE_HIGH 0x2D
|
|
#define CRT_ID_DEVICE_LOW 0x2E
|
|
#define CRT_ID_REVISION 0x2F
|
|
#define CRT_ID_CHIP_ID_REV 0x30
|
|
#define CRT_ID_MEMORY_CONF 0x31
|
|
#define CRT_ID_BACKWAD_COMP_1 0x32
|
|
#define CRT_ID_BACKWAD_COMP_2 0x33
|
|
#define CRT_ID_BACKWAD_COMP_3 0x34
|
|
#define CRT_ID_REGISTER_LOCK 0x35
|
|
#define CRT_ID_CONFIG_1 0x36
|
|
#define CRT_ID_CONFIG_2 0x37
|
|
#define CRT_ID_REGISTER_LOCK_1 0x38
|
|
#define CRT_ID_REGISTER_LOCK_2 0x39
|
|
#define CRT_ID_MISC_1 0x3A
|
|
#define CRT_ID_DISPLAY_FIFO 0x3B
|
|
#define CRT_ID_LACE_RETR_START 0x3C
|
|
/* S3 extensions: System Control Registers */
|
|
#define CRT_ID_SYSTEM_CONFIG 0x40
|
|
#define CRT_ID_BIOS_FLAG 0x41
|
|
#define CRT_ID_LACE_CONTROL 0x42
|
|
#define CRT_ID_EXT_MODE 0x43
|
|
#define CRT_ID_HWGC_MODE 0x45 /* HWGC = Hardware Graphics Cursor */
|
|
#define CRT_ID_HWGC_ORIGIN_X_HI 0x46
|
|
#define CRT_ID_HWGC_ORIGIN_X_LO 0x47
|
|
#define CRT_ID_HWGC_ORIGIN_Y_HI 0x48
|
|
#define CRT_ID_HWGC_ORIGIN_Y_LO 0x49
|
|
#define CRT_ID_HWGC_FG_STACK 0x4A
|
|
#define CRT_ID_HWGC_BG_STACK 0x4B
|
|
#define CRT_ID_HWGC_START_AD_HI 0x4C
|
|
#define CRT_ID_HWGC_START_AD_LO 0x4D
|
|
#define CRT_ID_HWGC_DSTART_X 0x4E
|
|
#define CRT_ID_HWGC_DSTART_Y 0x4F
|
|
/* S3 extensions: System Extension Registers */
|
|
#define CRT_ID_EXT_SYS_CNTL_1 0x50 /* NOT a virge register */
|
|
#define CRT_ID_EXT_SYS_CNTL_2 0x51
|
|
#define CRT_ID_EXT_BIOS_FLAG_1 0x52
|
|
#define CRT_ID_EXT_MEM_CNTL_1 0x53
|
|
#define CRT_ID_EXT_MEM_CNTL_2 0x54
|
|
#define CRT_ID_EXT_DAC_CNTL 0x55
|
|
#define CRT_ID_EX_SYNC_1 0x56
|
|
#define CRT_ID_EX_SYNC_2 0x57
|
|
#define CRT_ID_LAW_CNTL 0x58 /* LAW = Linear Address Window */
|
|
#define CRT_ID_LAW_POS_HI 0x59
|
|
#define CRT_ID_LAW_POS_LO 0x5A
|
|
#define CRT_ID_GOUT_PORT 0x5C
|
|
#define CRT_ID_EXT_HOR_OVF 0x5D
|
|
#define CRT_ID_EXT_VER_OVF 0x5E
|
|
#define CRT_ID_EXT_MEM_CNTL_3 0x60 /* NOT a virge register */
|
|
#define CRT_ID_EXT_MEM_CNTL_4 0x61
|
|
#define CRT_ID_EX_SYNC_3 0x63 /* NOT a virge register */
|
|
#define CRT_ID_EXT_MISC_CNTL 0x65
|
|
#define CRT_ID_EXT_MISC_CNTL_1 0x66
|
|
#define CRT_ID_EXT_MISC_CNTL_2 0x67
|
|
#define CRT_ID_CONFIG_3 0x68
|
|
#define CRT_ID_EXT_SYS_CNTL_3 0x69
|
|
#define CRT_ID_EXT_SYS_CNTL_4 0x6A
|
|
#define CRT_ID_EXT_BIOS_FLAG_3 0x6B
|
|
#define CRT_ID_EXT_BIOS_FLAG_4 0x6C
|
|
/* S3 virge extensions: more System Extension Registers */
|
|
#define CRT_ID_EXT_BIOS_FLAG_5 0x6D
|
|
#define CRT_ID_EXT_DAC_TEST 0x6E
|
|
#define CRT_ID_CONFIG_4 0x6F
|
|
|
|
/* Video DAC */
|
|
#define VDAC_ADDRESS 0x03c8
|
|
#define VDAC_ADDRESS_W 0x03c8
|
|
#define VDAC_ADDRESS_R 0x03c7
|
|
#define VDAC_STATE 0x03c7
|
|
#define VDAC_DATA 0x03c9
|
|
#define VDAC_MASK 0x03c6
|
|
|
|
/* Miscellaneous Registers */
|
|
#define MR_SUBSYSTEM_STATUS_R 0x8504 /* new for virge */
|
|
#define MR_SUBSYSTEM_CNTL_W 0x8504 /* new for virge */
|
|
#define MR_ADVANCED_FUNCTION_CONTROL 0x850C /* new for virge */
|
|
|
|
/* Blitter */
|
|
#define BLT_COMMAND_SET 0xA500
|
|
#define BLT_SIZE_X_Y 0xA504
|
|
#define BLT_SRC_X_Y 0xA508
|
|
#define BLT_DEST_X_Y 0xA50C
|
|
|
|
#define BLT_SRC_BASE 0xa4d4
|
|
#define BLT_DEST_BASE 0xa4d8
|
|
#define BLT_CLIP_LEFT_RIGHT 0xa4dc
|
|
#define BLT_CLIP_TOP_BOTTOM 0xa4e0
|
|
#define BLT_SRC_DEST_STRIDE 0xa4e4
|
|
#define BLT_MONO_PATTERN_0 0xa4e8
|
|
#define BLT_MONO_PATTERN_1 0xa4ec
|
|
#define BLT_PATTERN_COLOR 0xa4f4
|
|
|
|
#define L2D_COMMAND_SET 0xA900
|
|
#define L2D_CLIP_LEFT_RIGHT 0xA8DC
|
|
#define L2D_CLIP_TOP_BOTTOM 0xA8E0
|
|
|
|
#define P2D_COMMAND_SET 0xAD00
|
|
#define P2D_CLIP_LEFT_RIGHT 0xACDC
|
|
#define P2D_CLIP_TOP_BOTTOM 0xACE0
|
|
|
|
#define CMD_NOP (0xf << 27) /* %1111 << 27, was 0x07 */
|
|
#define S3V_BITBLT (0x0 << 27)
|
|
#define S3V_RECTFILL (0x2 << 27)
|
|
#define S3V_AUTOEXE 0x01
|
|
#define S3V_HWCLIP 0x02
|
|
#define S3V_DRAW 0x20
|
|
#define S3V_DST_8BPP 0x00
|
|
#define S3V_DST_16BPP 0x04
|
|
#define S3V_DST_24BPP 0x08
|
|
#define S3V_MONO_PAT 0x100
|
|
|
|
#define S3V_BLT_COPY (0xcc<<17)
|
|
#define S3V_BLT_CLEAR (0x00<<17)
|
|
#define S3V_BLT_SET (0xff<<17)
|