korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2025-01-04 21:04:46 +08:00
Code Issues Packages Projects Releases Wiki Activity
9cb6abcb26
linux/arch/powerpc/platforms/85xx/mpc85xx_mds.c
Timur Tabi 9cb6abcb26 powerpc/8xxx: remove 85xx/86xx restrictions from fsl_guts.h 
Remove the check for CONFIG_PPC_85xx and CONFIG_PPC_86xx from fsl_guts.h.
The check was originally intended to allow the same header file to
be used on 85xx and 86xx systems, even though the Global Utilities
register could be different.  It turns out that they're not actually
different, and so the check is not necessary.  In addition, neither
macro is defined for 64-bit e5500 kernels, so that causes a build
break.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-03-29 08:14:07 -05:00

505 lines
11 KiB
C
Raw Blame History

/*
* Copyright (C) 2006-2010, 2012 Freescale Semicondutor, Inc.
* All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
*
* Based on 83xx/mpc8360e_pb.c by:
* Li Yang <LeoLi@freescale.com>
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC85xx MDS board specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/phy.h>
#include <linux/memblock.h>
#include <asm/system.h>
#include <linux/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include <asm/fsl_guts.h>
#include "smp.h"
#include "mpc85xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#define MV88E1111_SCR 0x10
#define MV88E1111_SCR_125CLK 0x0010
static int mpc8568_fixup_125_clock(struct phy_device *phydev)
{
int scr;
int err;
/* Workaround for the 125 CLK Toggle */
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return scr;
err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
if (err)
return err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err)
return err;
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return scr;
err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
return err;
}
static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
{
int temp;
int err;
/* Errata */
err = phy_write(phydev,29, 0x0006);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = (temp & (~0x8000)) | 0x4000;
err = phy_write(phydev,30, temp);
if (err)
return err;
err = phy_write(phydev,29, 0x000a);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp &= ~0x0020;
err = phy_write(phydev,30,temp);
if (err)
return err;
/* Disable automatic MDI/MDIX selection */
temp = phy_read(phydev, 16);
if (temp < 0)
return temp;
temp &= ~0x0060;
err = phy_write(phydev,16,temp);
return err;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
#ifdef CONFIG_QUICC_ENGINE
static void __init mpc85xx_mds_reset_ucc_phys(void)
{
struct device_node *np;
static u8 __iomem *bcsr_regs;
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (!np)
return;
bcsr_regs = of_iomap(np, 0);
of_node_put(np);
if (!bcsr_regs)
return;
if (machine_is(mpc8568_mds)) {
#define BCSR_UCC1_GETH_EN (0x1 << 7)
#define BCSR_UCC2_GETH_EN (0x1 << 7)
#define BCSR_UCC1_MODE_MSK (0x3 << 4)
#define BCSR_UCC2_MODE_MSK (0x3 << 0)
/* Turn off UCC1 & UCC2 */
clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
/* Mode is RGMII, all bits clear */
clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
BCSR_UCC2_MODE_MSK);
/* Turn UCC1 & UCC2 on */
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
} else if (machine_is(mpc8569_mds)) {
#define BCSR7_UCC12_GETHnRST (0x1 << 2)
#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
#define BCSR_UCC_RGMII (0x1 << 6)
#define BCSR_UCC_RTBI (0x1 << 5)
/*
* U-Boot mangles interrupt polarity for Marvell PHYs,
* so reset built-in and UEM Marvell PHYs, this puts
* the PHYs into their normal state.
*/
clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
for (np = NULL; (np = of_find_compatible_node(np,
"network",
"ucc_geth")) != NULL;) {
const unsigned int *prop;
int ucc_num;
prop = of_get_property(np, "cell-index", NULL);
if (prop == NULL)
continue;
ucc_num = *prop - 1;
prop = of_get_property(np, "phy-connection-type", NULL);
if (prop == NULL)
continue;
if (strcmp("rtbi", (const char *)prop) == 0)
clrsetbits_8(&bcsr_regs[7 + ucc_num],
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
}
} else if (machine_is(p1021_mds)) {
#define BCSR11_ENET_MICRST (0x1 << 5)
/* Reset Micrel PHY */
clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
}
iounmap(bcsr_regs);
}
static void __init mpc85xx_mds_qe_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
if (!np)
return;
}
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
qe_reset();
of_node_put(np);
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
}
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
struct ccsr_guts __iomem *guts;
np = of_find_node_by_name(NULL, "global-utilities");
if (np) {
guts = of_iomap(np, 0);
if (!guts)
pr_err("mpc85xx-rdb: could not map global utilities register\n");
else{
/* P1021 has pins muxed for QE and other functions. To
* enable QE UEC mode, we need to set bit QE0 for UCC1
* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
* and QE12 for QE MII management signals in PMUXCR
* register.
*/
setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
MPC85xx_PMUXCR_QE(3) |
MPC85xx_PMUXCR_QE(9) |
MPC85xx_PMUXCR_QE(12));
iounmap(guts);
}
of_node_put(np);
}
}
}
static void __init mpc85xx_mds_qeic_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
else
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
}
#else
static void __init mpc85xx_mds_qe_init(void) { }
static void __init mpc85xx_mds_qeic_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */
static void __init mpc85xx_mds_setup_arch(void)
{
#ifdef CONFIG_PCI
struct pci_controller *hose;
struct device_node *np;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
}
#endif
mpc85xx_smp_init();
mpc85xx_mds_qe_init();
#ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
static int __init board_fixups(void)
{
char phy_id[20];
char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
struct device_node *mdio;
struct resource res;
int i;
for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
of_address_to_resource(mdio, 0, &res);
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
(unsigned long long)res.start, 1);
phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
/* Register a workaround for errata */
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
(unsigned long long)res.start, 7);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
of_node_put(mdio);
}
return 0;
}
machine_arch_initcall(mpc8568_mds, board_fixups);
machine_arch_initcall(mpc8569_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
{ .compatible = "fsl,mpc8548-guts", },
{ .compatible = "gpio-leds", },
{},
};
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8568_mds))
simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
mpc85xx_common_publish_devices();
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
return 0;
}
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
static void __init mpc85xx_mds_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
mpc85xx_mds_qeic_init();
}
static int __init mpc85xx_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC85xxMDS");
}
define_machine(mpc8568_mds) {
.name = "MPC8568 MDS",
.probe = mpc85xx_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
static int __init mpc8569_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
}
define_machine(mpc8569_mds) {
.name = "MPC8569 MDS",
.probe = mpc8569_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
static int __init p1021_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
}
define_machine(p1021_mds) {
.name = "P1021 MDS",
.probe = p1021_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
Reference in New Issue View Git Blame Copy Permalink