mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
0f3a10687b
This change disables the DMA support (RX/TX) on the NXP's fsl_lpuart driver - the PIO mode is used instead. This change is necessary for better robustness of BK4's device use cases with many potentially interrupted short serial transfers. Without it the driver hangs when some distortion happens on UART lines. Signed-off-by: Lukasz Majewski <lukma@denx.de> Suggested-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
538 lines
11 KiB
Plaintext
538 lines
11 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2018
|
|
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "vf610.dtsi"
|
|
|
|
/ {
|
|
model = "Liebherr BK4 controller";
|
|
compatible = "lwn,bk4", "fsl,vf610";
|
|
|
|
chosen {
|
|
stdout-path = &uart1;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x8000000>;
|
|
};
|
|
|
|
audio_ext: oscillator-audio {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24576000>;
|
|
};
|
|
|
|
enet_ext: oscillator-ethernet {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
|
|
|
/* LED D5 */
|
|
led0: heartbeat {
|
|
label = "heartbeat";
|
|
gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
linux,default-trigger = "heartbeat";
|
|
};
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3P3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_vcc_3v3_mcu: regulator-vcc3v3mcu {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc_3v3_mcu";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
spi-gpio {
|
|
compatible = "spi-gpio";
|
|
pinctrl-0 = <&pinctrl_gpio_spi>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
/* PTD12 ->RPIO[91] */
|
|
sck-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
|
|
/* PTD10 ->RPIO[89] */
|
|
miso-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
|
|
num-chipselects = <0>;
|
|
|
|
gpio@0 {
|
|
compatible = "pisosr-gpio";
|
|
reg = <0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
/* PTB18 -> RGPIO[40] */
|
|
load-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
|
|
spi-max-frequency = <100000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&adc0 {
|
|
vref-supply = <®_vcc_3v3_mcu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&adc1 {
|
|
vref-supply = <®_vcc_3v3_mcu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&can0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&can1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can1>;
|
|
status = "okay";
|
|
};
|
|
|
|
&clks {
|
|
clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
|
|
clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
|
|
};
|
|
|
|
&dspi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dspi0>;
|
|
bus-num = <0>;
|
|
status = "okay";
|
|
|
|
spidev0@0 {
|
|
compatible = "lwn,bk4";
|
|
spi-max-frequency = <30000000>;
|
|
reg = <0>;
|
|
fsl,spi-cs-sck-delay = <200>;
|
|
fsl,spi-sck-cs-delay = <400>;
|
|
};
|
|
};
|
|
|
|
&dspi3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_dspi3>;
|
|
bus-num = <3>;
|
|
status = "okay";
|
|
spi-slave;
|
|
#address-cells = <0>;
|
|
|
|
slave {
|
|
compatible = "lwn,bk4";
|
|
spi-max-frequency = <30000000>;
|
|
};
|
|
};
|
|
|
|
&edma0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&edma1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&esdhc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_esdhc1>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
&fec0 {
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy0>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec0>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy0: ethernet-phy@1 {
|
|
reg = <1>;
|
|
clocks = <&clks VF610_CLK_ENET_50M>;
|
|
clock-names = "rmii-ref";
|
|
};
|
|
};
|
|
};
|
|
|
|
&fec1 {
|
|
phy-mode = "rmii";
|
|
phy-handle = <ðphy1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_fec1>;
|
|
status = "okay";
|
|
|
|
mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ethphy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
clocks = <&clks VF610_CLK_ENET_50M>;
|
|
clock-names = "rmii-ref";
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c2 {
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
status = "okay";
|
|
|
|
at24c256: eeprom@50 {
|
|
compatible = "atmel,24c256";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
m41t62: rtc@68 {
|
|
compatible = "st,m41t62";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&nfc {
|
|
assigned-clocks = <&clks VF610_CLK_NFC>;
|
|
assigned-clock-rates = <33000000>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nfc>;
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
compatible = "fsl,vf610-nfc-nandcs";
|
|
reg = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
nand-bus-width = <16>;
|
|
nand-ecc-mode = "hw";
|
|
nand-ecc-strength = <24>;
|
|
nand-ecc-step-size = <2048>;
|
|
nand-on-flash-bbt;
|
|
};
|
|
};
|
|
|
|
&qspi0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_qspi0>;
|
|
status = "okay";
|
|
|
|
n25q128a13_4: flash@0 {
|
|
compatible = "n25q128a13", "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
spi-max-frequency = <66000000>;
|
|
spi-rx-bus-width = <4>;
|
|
reg = <0>;
|
|
};
|
|
|
|
n25q128a13_2: flash@2 {
|
|
compatible = "n25q128a13", "jedec,spi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
spi-max-frequency = <66000000>;
|
|
spi-rx-bus-width = <2>;
|
|
reg = <2>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdev0 {
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh1 {
|
|
disable-over-current;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbmisc0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbmisc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&iomuxc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
pinctrl_hog: hoggrp {
|
|
fsl,pins = <
|
|
/* One_Wire_PSU_EN */
|
|
VF610_PAD_PTC29__GPIO_102 0x1183
|
|
/* SPI ENABLE */
|
|
VF610_PAD_PTB26__GPIO_96 0x1183
|
|
/* EB control */
|
|
VF610_PAD_PTE14__GPIO_119 0x1183
|
|
VF610_PAD_PTE4__GPIO_109 0x1181
|
|
/* Feedback_Lines */
|
|
VF610_PAD_PTC31__GPIO_104 0x1181
|
|
VF610_PAD_PTA7__GPIO_134 0x1181
|
|
VF610_PAD_PTD9__GPIO_88 0x1181
|
|
VF610_PAD_PTE1__GPIO_106 0x1183
|
|
VF610_PAD_PTB2__GPIO_24 0x1181
|
|
VF610_PAD_PTB3__GPIO_25 0x1181
|
|
VF610_PAD_PTB1__GPIO_23 0x1181
|
|
/* SDHC Enable */
|
|
VF610_PAD_PTE19__GPIO_124 0x1183
|
|
/* SDHC Overcurrent */
|
|
VF610_PAD_PTB23__GPIO_93 0x1181
|
|
/* GPI */
|
|
VF610_PAD_PTE2__GPIO_107 0x1181
|
|
VF610_PAD_PTE3__GPIO_108 0x1181
|
|
VF610_PAD_PTE5__GPIO_110 0x1181
|
|
VF610_PAD_PTE6__GPIO_111 0x1181
|
|
/* GPO */
|
|
VF610_PAD_PTE0__GPIO_105 0x1183
|
|
VF610_PAD_PTE7__GPIO_112 0x1183
|
|
/* RS485 Control */
|
|
VF610_PAD_PTB8__GPIO_30 0x1183
|
|
VF610_PAD_PTB9__GPIO_31 0x1183
|
|
VF610_PAD_PTE8__GPIO_113 0x1183
|
|
/* MPBUS MPB_EN */
|
|
VF610_PAD_PTE28__GPIO_133 0x1183
|
|
/* MISC */
|
|
VF610_PAD_PTE10__GPIO_115 0x1183
|
|
VF610_PAD_PTE11__GPIO_116 0x1183
|
|
VF610_PAD_PTE17__GPIO_122 0x1183
|
|
VF610_PAD_PTC30__GPIO_103 0x1183
|
|
VF610_PAD_PTB0__GPIO_22 0x1181
|
|
/* RESETINFO */
|
|
VF610_PAD_PTE26__GPIO_131 0x1183
|
|
VF610_PAD_PTD6__GPIO_85 0x1181
|
|
VF610_PAD_PTE27__GPIO_132 0x1181
|
|
VF610_PAD_PTE13__GPIO_118 0x1181
|
|
VF610_PAD_PTE21__GPIO_126 0x1181
|
|
VF610_PAD_PTE22__GPIO_127 0x1181
|
|
/* EE_5V_EN */
|
|
VF610_PAD_PTE18__GPIO_123 0x1183
|
|
/* EE_5V_OC_N */
|
|
VF610_PAD_PTE25__GPIO_130 0x1181
|
|
>;
|
|
};
|
|
|
|
pinctrl_can0: can0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB14__CAN0_RX 0x1181
|
|
VF610_PAD_PTB15__CAN0_TX 0x1182
|
|
>;
|
|
};
|
|
|
|
pinctrl_can1: can1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB16__CAN1_RX 0x1181
|
|
VF610_PAD_PTB17__CAN1_TX 0x1182
|
|
>;
|
|
};
|
|
|
|
pinctrl_dspi0: dspi0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB18__DSPI0_CS1 0x1182
|
|
VF610_PAD_PTB19__DSPI0_CS0 0x1182
|
|
VF610_PAD_PTB20__DSPI0_SIN 0x1181
|
|
VF610_PAD_PTB21__DSPI0_SOUT 0x1182
|
|
VF610_PAD_PTB22__DSPI0_SCK 0x1182
|
|
>;
|
|
};
|
|
|
|
pinctrl_dspi3: dspi3grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD10__DSPI3_CS0 0x1181
|
|
VF610_PAD_PTD11__DSPI3_SIN 0x1181
|
|
VF610_PAD_PTD12__DSPI3_SOUT 0x1182
|
|
VF610_PAD_PTD13__DSPI3_SCK 0x1181
|
|
>;
|
|
};
|
|
|
|
pinctrl_esdhc1: esdhc1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
|
|
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
|
|
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
|
|
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
|
|
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
|
|
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
|
|
VF610_PAD_PTB28__GPIO_98 0x219d
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec0: fec0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA6__RMII_CLKIN 0x30dd
|
|
VF610_PAD_PTC0__ENET_RMII0_MDC 0x30de
|
|
VF610_PAD_PTC1__ENET_RMII0_MDIO 0x30df
|
|
VF610_PAD_PTC2__ENET_RMII0_CRS 0x30dd
|
|
VF610_PAD_PTC3__ENET_RMII0_RXD1 0x30dd
|
|
VF610_PAD_PTC4__ENET_RMII0_RXD0 0x30dd
|
|
VF610_PAD_PTC5__ENET_RMII0_RXER 0x30dd
|
|
VF610_PAD_PTC6__ENET_RMII0_TXD1 0x30de
|
|
VF610_PAD_PTC7__ENET_RMII0_TXD0 0x30de
|
|
VF610_PAD_PTC8__ENET_RMII0_TXEN 0x30de
|
|
>;
|
|
};
|
|
|
|
pinctrl_fec1: fec1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30de
|
|
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30df
|
|
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30dd
|
|
VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30dd
|
|
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30dd
|
|
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30dd
|
|
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30de
|
|
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30de
|
|
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30de
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
|
fsl,pins = <
|
|
/* Heart bit LED */
|
|
VF610_PAD_PTE12__GPIO_117 0x1183
|
|
/* LEDS */
|
|
VF610_PAD_PTE15__GPIO_120 0x1183
|
|
VF610_PAD_PTA12__GPIO_5 0x1183
|
|
VF610_PAD_PTA16__GPIO_6 0x1183
|
|
VF610_PAD_PTE9__GPIO_114 0x1183
|
|
VF610_PAD_PTE20__GPIO_125 0x1183
|
|
VF610_PAD_PTE23__GPIO_128 0x1183
|
|
VF610_PAD_PTE16__GPIO_121 0x1183
|
|
>;
|
|
};
|
|
|
|
pinctrl_gpio_spi: pinctrl-gpio-spi {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB18__GPIO_40 0x1183
|
|
VF610_PAD_PTD10__GPIO_89 0x1183
|
|
VF610_PAD_PTD12__GPIO_91 0x1183
|
|
>;
|
|
};
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA22__I2C2_SCL 0x34df
|
|
VF610_PAD_PTA23__I2C2_SDA 0x34df
|
|
>;
|
|
};
|
|
|
|
pinctrl_nfc: nfcgrp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD23__NF_IO7 0x28df
|
|
VF610_PAD_PTD22__NF_IO6 0x28df
|
|
VF610_PAD_PTD21__NF_IO5 0x28df
|
|
VF610_PAD_PTD20__NF_IO4 0x28df
|
|
VF610_PAD_PTD19__NF_IO3 0x28df
|
|
VF610_PAD_PTD18__NF_IO2 0x28df
|
|
VF610_PAD_PTD17__NF_IO1 0x28df
|
|
VF610_PAD_PTD16__NF_IO0 0x28df
|
|
VF610_PAD_PTB24__NF_WE_B 0x28c2
|
|
VF610_PAD_PTB25__NF_CE0_B 0x28c2
|
|
VF610_PAD_PTB27__NF_RE_B 0x28c2
|
|
VF610_PAD_PTC26__NF_RB_B 0x283d
|
|
VF610_PAD_PTC27__NF_ALE 0x28c2
|
|
VF610_PAD_PTC28__NF_CLE 0x28c2
|
|
>;
|
|
};
|
|
|
|
pinctrl_qspi0: qspi0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTD0__QSPI0_A_QSCK 0x397f
|
|
VF610_PAD_PTD1__QSPI0_A_CS0 0x397f
|
|
VF610_PAD_PTD2__QSPI0_A_DATA3 0x397f
|
|
VF610_PAD_PTD3__QSPI0_A_DATA2 0x397f
|
|
VF610_PAD_PTD4__QSPI0_A_DATA1 0x397f
|
|
VF610_PAD_PTD5__QSPI0_A_DATA0 0x397f
|
|
VF610_PAD_PTD7__QSPI0_B_QSCK 0x397f
|
|
VF610_PAD_PTD8__QSPI0_B_CS0 0x397f
|
|
VF610_PAD_PTD11__QSPI0_B_DATA1 0x397f
|
|
VF610_PAD_PTD12__QSPI0_B_DATA0 0x397f
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart0: uart0grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB10__UART0_TX 0x21a2
|
|
VF610_PAD_PTB11__UART0_RX 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart1: uart1grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB4__UART1_TX 0x21a2
|
|
VF610_PAD_PTB5__UART1_RX 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTB6__UART2_TX 0x21a2
|
|
VF610_PAD_PTB7__UART2_RX 0x21a1
|
|
>;
|
|
};
|
|
|
|
pinctrl_uart3: uart3grp {
|
|
fsl,pins = <
|
|
VF610_PAD_PTA20__UART3_TX 0x21a2
|
|
VF610_PAD_PTA21__UART3_RX 0x21a1
|
|
>;
|
|
};
|
|
};
|