korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-16 08:44:21 +08:00
Code Issues Packages Projects Releases Wiki Activity
9c280f9087
linux/arch/arm/boot/dts/rk3188-radxarock.dts
Heiko Stuebner 07f08d9cee ARM: dts: rockchip: bulk convert gpios to their constant counterparts 
Rockchip SoCs use 2 different numbering schemes. Where the gpio-
controllers just count 0-31 for their 32 gpios, the underlying
iomux controller splits these into 4 separate entities A-D.

Device-schematics always use these iomux-values to identify pins,
so to make mapping schematics to devicetree easier Andy Yan introduced
named constants for the pins but so far we only used them on new
additions.

Using a sed-script created by Emil Renner Berthing bulk-convert
the remaining raw gpio numbers into their descriptive counterparts
and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings:

/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]*  *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]*  *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]*  *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]*  *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]*  *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]*  *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]*  *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]*  *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]*  *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]*  *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]*  *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]*  *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]*  *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]*  *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]*  *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]*  *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]*  *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]*  *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]*  *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]*  *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]*  *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]*  *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]*  *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]*  *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]*  *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]*  *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]*  *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]*  *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]*  *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]*  *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]*  *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]*  *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)RK_FUNC_\([1-9]\) /<\1\2 /g

Suggested-by: Emil Renner Berthing <esmil@mailme.dk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11 14:38:26 +02:00

383 lines
7.0 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2013 Heiko Stuebner <heiko@sntech.de>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3188.dtsi"
/ {
model = "Radxa Rock";
compatible = "radxa,rock", "rockchip,rk3188";
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x80000000>;
};
gpio-keys {
compatible = "gpio-keys";
autorepeat;
power {
gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "GPIO Key Power";
linux,input-type = <1>;
wakeup-source;
debounce-interval = <100>;
};
};
gpio-leds {
compatible = "gpio-leds";
green {
label = "rock:green:user1";
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
default-state = "off";
};
blue {
label = "rock:blue:user2";
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sleep {
label = "rock:red:power";
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "SPDIF";
simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */
cpu { sound-dai = <&spdif>; };
codec { sound-dai = <&spdif_out>; };
};
};
spdif_out: spdif-out {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
};
ir_recv: gpio-ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_recv_pin>;
};
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio2 RK_PD7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_vbus_drv>;
regulator-name = "otg-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vcc_sd0: sdmmc-regulator {
compatible = "regulator-fixed";
regulator-name = "sdmmc-supply";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_vbus_drv>;
regulator-name = "host-pwr";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vsys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
};
&emac {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
phy = <&phy0>;
phy-supply = <&vcc_rmii>;
phy0: ethernet-phy@0 {
reg = <0>;
interrupt-parent = <&gpio3>;
interrupts = <RK_PD2 IRQ_TYPE_LEVEL_LOW>;
};
};
&cpu0 {
cpu-supply = <&vdd_arm>;
};
&cpu1 {
cpu-supply = <&vdd_arm>;
};
&cpu2 {
cpu-supply = <&vdd_arm>;
};
&cpu3 {
cpu-supply = <&vdd_arm>;
};
&gpu {
status = "okay";
};
&i2c1 {
status = "okay";
clock-frequency = <400000>;
rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB5 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&rtc_int>;
#clock-cells = <0>;
clock-output-names = "xin32k";
};
act8846: act8846@5a {
compatible = "active-semi,act8846";
reg = <0x5a>;
status = "okay";
system-power-controller;
pinctrl-names = "default";
pinctrl-0 = <&act8846_dvs0_ctl>;
vp1-supply = <&vsys>;
vp2-supply = <&vsys>;
vp3-supply = <&vsys>;
vp4-supply = <&vsys>;
inl1-supply = <&vcc_io>;
inl2-supply = <&vsys>;
inl3-supply = <&vsys>;
regulators {
vcc_ddr: REG1 {
regulator-name = "VCC_DDR";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vdd_log: REG2 {
regulator-name = "VDD_LOG";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vdd_arm: REG3 {
regulator-name = "VDD_ARM";
regulator-min-microvolt = <875000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
vcc_io: REG4 {
regulator-name = "VCC_IO";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_10: REG5 {
regulator-name = "VDD_10";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
vdd_hdmi: REG6 {
regulator-name = "VDD_HDMI";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vcc18: REG7 {
regulator-name = "VCC_18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcca_33: REG8 {
regulator-name = "VCCA_33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vcc_rmii: REG9 {
regulator-name = "VCC_RMII";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vccio_wl: REG10 {
regulator-name = "VCCIO_WL";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vcc_18: REG11 {
regulator-name = "VCC18_IO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcc28: REG12 {
regulator-name = "VCC_28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
};
};
};
&mmc0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd0>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
disable-wp;
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&pinctrl {
pcfg_output_low: pcfg-output-low {
output-low;
};
act8846 {
act8846_dvs0_ctl: act8846-dvs0-ctl {
rockchip,pins = <3 RK_PD3 RK_FUNC_GPIO &pcfg_output_low>;
};
};
hym8563 {
rtc_int: rtc-int {
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
lan8720a {
phy_int: phy-int {
rockchip,pins = <3 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir-receiver {
ir_recv_pin: ir-recv-pin {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sd0 {
sdmmc_pwr: sdmmc-pwr {
rockchip,pins = <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
};
otg_vbus_drv: otg-vbus-drv {
rockchip,pins = <2 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&spdif {
status = "okay";
};
&uart0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_host {
status = "okay";
};
&usb_otg {
status = "okay";
};
&wdt {
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink