mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
2618500dd3
* Removes mediatek,physpeed property from dtsi that is useless in PHYLINK * Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit. * Set gmac1 to gmii mode that connect to a internal gphy Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
480 lines
13 KiB
Plaintext
480 lines
13 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2019 MediaTek Inc.
|
|
*
|
|
* Author: Ryder Lee <ryder.lee@mediatek.com>
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/mt7629-clk.h>
|
|
#include <dt-bindings/power/mt7622-power.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/reset/mt7629-resets.h>
|
|
|
|
/ {
|
|
compatible = "mediatek,mt7629";
|
|
interrupt-parent = <&sysirq>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "mediatek,mt6589-smp";
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x0>;
|
|
clock-frequency = <1250000000>;
|
|
cci-control-port = <&cci_control2>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x1>;
|
|
clock-frequency = <1250000000>;
|
|
cci-control-port = <&cci_control2>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a7-pmu";
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 9 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>;
|
|
};
|
|
|
|
clk20m: oscillator-0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <20000000>;
|
|
clock-output-names = "clk20m";
|
|
};
|
|
|
|
clk40m: oscillator-1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <40000000>;
|
|
clock-output-names = "clkxtal";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
clock-frequency = <20000000>;
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
infracfg: syscon@10000000 {
|
|
compatible = "mediatek,mt7629-infracfg", "syscon";
|
|
reg = <0x10000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pericfg: syscon@10002000 {
|
|
compatible = "mediatek,mt7629-pericfg", "syscon";
|
|
reg = <0x10002000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
scpsys: scpsys@10006000 {
|
|
compatible = "mediatek,mt7629-scpsys",
|
|
"mediatek,mt7622-scpsys";
|
|
#power-domain-cells = <1>;
|
|
reg = <0x10006000 0x1000>;
|
|
clocks = <&topckgen CLK_TOP_HIF_SEL>;
|
|
clock-names = "hif_sel";
|
|
assigned-clocks = <&topckgen CLK_TOP_HIF_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>;
|
|
infracfg = <&infracfg>;
|
|
};
|
|
|
|
timer: timer@10009000 {
|
|
compatible = "mediatek,mt7629-timer",
|
|
"mediatek,mt6765-timer";
|
|
reg = <0x10009000 0x60>;
|
|
interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clk20m>;
|
|
clock-names = "clk20m";
|
|
};
|
|
|
|
sysirq: interrupt-controller@10200a80 {
|
|
compatible = "mediatek,mt7629-sysirq",
|
|
"mediatek,mt6577-sysirq";
|
|
reg = <0x10200a80 0x20>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
apmixedsys: syscon@10209000 {
|
|
compatible = "mediatek,mt7629-apmixedsys", "syscon";
|
|
reg = <0x10209000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
rng: rng@1020f000 {
|
|
compatible = "mediatek,mt7629-rng",
|
|
"mediatek,mt7623-rng";
|
|
reg = <0x1020f000 0x100>;
|
|
clocks = <&infracfg CLK_INFRA_TRNG_PD>;
|
|
clock-names = "rng";
|
|
};
|
|
|
|
topckgen: syscon@10210000 {
|
|
compatible = "mediatek,mt7629-topckgen", "syscon";
|
|
reg = <0x10210000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
watchdog: watchdog@10212000 {
|
|
compatible = "mediatek,mt7629-wdt",
|
|
"mediatek,mt6589-wdt";
|
|
reg = <0x10212000 0x100>;
|
|
};
|
|
|
|
pio: pinctrl@10217000 {
|
|
compatible = "mediatek,mt7629-pinctrl";
|
|
reg = <0x10217000 0x8000>,
|
|
<0x10005000 0x1000>;
|
|
reg-names = "base", "eint";
|
|
gpio-controller;
|
|
gpio-ranges = <&pio 0 0 79>;
|
|
#gpio-cells = <2>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-parent = <&gic>;
|
|
};
|
|
|
|
gic: interrupt-controller@10300000 {
|
|
compatible = "arm,gic-400";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
reg = <0x10310000 0x1000>,
|
|
<0x10320000 0x1000>,
|
|
<0x10340000 0x2000>,
|
|
<0x10360000 0x2000>;
|
|
};
|
|
|
|
cci: cci@10390000 {
|
|
compatible = "arm,cci-400";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10390000 0x1000>;
|
|
ranges = <0 0x10390000 0x10000>;
|
|
|
|
cci_control0: slave-if@1000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace-lite";
|
|
reg = <0x1000 0x1000>;
|
|
};
|
|
|
|
cci_control1: slave-if@4000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x4000 0x1000>;
|
|
};
|
|
|
|
cci_control2: slave-if@5000 {
|
|
compatible = "arm,cci-400-ctrl-if";
|
|
interface-type = "ace";
|
|
reg = <0x5000 0x1000>;
|
|
};
|
|
|
|
pmu@9000 {
|
|
compatible = "arm,cci-400-pmu,r1";
|
|
reg = <0x9000 0x5000>;
|
|
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
uart0: serial@11002000 {
|
|
compatible = "mediatek,mt7629-uart",
|
|
"mediatek,mt6577-uart";
|
|
reg = <0x11002000 0x400>;
|
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_UART_SEL>,
|
|
<&pericfg CLK_PERI_UART0_PD>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@11003000 {
|
|
compatible = "mediatek,mt7629-uart",
|
|
"mediatek,mt6577-uart";
|
|
reg = <0x11003000 0x400>;
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_UART_SEL>,
|
|
<&pericfg CLK_PERI_UART1_PD>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@11004000 {
|
|
compatible = "mediatek,mt7629-uart",
|
|
"mediatek,mt6577-uart";
|
|
reg = <0x11004000 0x400>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_UART_SEL>,
|
|
<&pericfg CLK_PERI_UART2_PD>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c: i2c@11007000 {
|
|
compatible = "mediatek,mt7629-i2c",
|
|
"mediatek,mt2712-i2c";
|
|
reg = <0x11007000 0x90>,
|
|
<0x11000100 0x80>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
|
|
clock-div = <4>;
|
|
clocks = <&pericfg CLK_PERI_I2C0_PD>,
|
|
<&pericfg CLK_PERI_AP_DMA_PD>;
|
|
clock-names = "main", "dma";
|
|
assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi: spi@1100a000 {
|
|
compatible = "mediatek,mt7629-spi",
|
|
"mediatek,mt7622-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x1100a000 0x100>;
|
|
interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
|
|
<&topckgen CLK_TOP_SPI0_SEL>,
|
|
<&pericfg CLK_PERI_SPI0_PD>;
|
|
clock-names = "parent-clk", "sel-clk", "spi-clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
qspi: spi@11014000 {
|
|
compatible = "mediatek,mt7629-nor",
|
|
"mediatek,mt8173-nor";
|
|
reg = <0x11014000 0xe0>;
|
|
clocks = <&pericfg CLK_PERI_FLASH_PD>,
|
|
<&topckgen CLK_TOP_FLASH_SEL>;
|
|
clock-names = "spi", "sf";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssusbsys: syscon@1a000000 {
|
|
compatible = "mediatek,mt7629-ssusbsys", "syscon";
|
|
reg = <0x1a000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
ssusb: usb@1a0c0000 {
|
|
compatible = "mediatek,mt7629-xhci",
|
|
"mediatek,mtk-xhci";
|
|
reg = <0x1a0c0000 0x01000>,
|
|
<0x1a0c3e00 0x0100>;
|
|
reg-names = "mac", "ippc";
|
|
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&ssusbsys CLK_SSUSB_SYS_EN>,
|
|
<&ssusbsys CLK_SSUSB_REF_EN>,
|
|
<&ssusbsys CLK_SSUSB_MCU_EN>,
|
|
<&ssusbsys CLK_SSUSB_DMA_EN>;
|
|
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck";
|
|
assigned-clocks = <&topckgen CLK_TOP_AXI_SEL>,
|
|
<&topckgen CLK_TOP_SATA_SEL>,
|
|
<&topckgen CLK_TOP_HIF_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_SYSPLL1_D2>,
|
|
<&topckgen CLK_TOP_UNIVPLL2_D4>,
|
|
<&topckgen CLK_TOP_UNIVPLL1_D2>;
|
|
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF1>;
|
|
phys = <&u2port0 PHY_TYPE_USB2>,
|
|
<&u3port0 PHY_TYPE_USB3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
u3phy0: usb-phy@1a0c4000 {
|
|
compatible = "mediatek,generic-tphy-v2";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x1a0c4000 0xe00>;
|
|
status = "disabled";
|
|
|
|
u2port0: usb-phy@0 {
|
|
reg = <0 0x700>;
|
|
clocks = <&ssusbsys CLK_SSUSB_U2_PHY_EN>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
u3port0: usb-phy@700 {
|
|
reg = <0x700 0x700>;
|
|
clocks = <&clk20m>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pciesys: syscon@1a100800 {
|
|
compatible = "mediatek,mt7629-pciesys", "syscon";
|
|
reg = <0x1a100800 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pcie: pcie@1a140000 {
|
|
compatible = "mediatek,mt7629-pcie";
|
|
device_type = "pci";
|
|
reg = <0x1a140000 0x1000>,
|
|
<0x1a145000 0x1000>;
|
|
reg-names = "subsys","port1";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
|
|
<&pciesys CLK_PCIE_P0_AHB_EN>,
|
|
<&pciesys CLK_PCIE_P1_AUX_EN>,
|
|
<&pciesys CLK_PCIE_P1_AXI_EN>,
|
|
<&pciesys CLK_PCIE_P1_OBFF_EN>,
|
|
<&pciesys CLK_PCIE_P1_PIPE_EN>;
|
|
clock-names = "sys_ck1", "ahb_ck1",
|
|
"aux_ck1", "axi_ck1",
|
|
"obff_ck1", "pipe_ck1";
|
|
assigned-clocks = <&topckgen CLK_TOP_SATA_SEL>,
|
|
<&topckgen CLK_TOP_AXI_SEL>,
|
|
<&topckgen CLK_TOP_HIF_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL2_D4>,
|
|
<&topckgen CLK_TOP_SYSPLL1_D2>,
|
|
<&topckgen CLK_TOP_UNIVPLL1_D2>;
|
|
phys = <&pcieport1 PHY_TYPE_PCIE>;
|
|
phy-names = "pcie-phy1";
|
|
power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
|
|
bus-range = <0x00 0xff>;
|
|
ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
|
|
|
|
pcie1: pcie@1,0 {
|
|
device_type = "pci";
|
|
reg = <0x0800 0 0 0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges;
|
|
num-lanes = <1>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0 0 0 1 &pcie_intc1 0>,
|
|
<0 0 0 2 &pcie_intc1 1>,
|
|
<0 0 0 3 &pcie_intc1 2>,
|
|
<0 0 0 4 &pcie_intc1 3>;
|
|
|
|
pcie_intc1: interrupt-controller {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
pciephy1: pcie-phy@1a14a000 {
|
|
compatible = "mediatek,generic-tphy-v2";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x1a14a000 0x1000>;
|
|
status = "disabled";
|
|
|
|
pcieport1: port1phy@0 {
|
|
reg = <0 0x1000>;
|
|
clocks = <&clk20m>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
ethsys: syscon@1b000000 {
|
|
compatible = "mediatek,mt7629-ethsys", "syscon";
|
|
reg = <0x1b000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
eth: ethernet@1b100000 {
|
|
compatible = "mediatek,mt7629-eth","syscon";
|
|
reg = <0x1b100000 0x20000>;
|
|
interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_ETH_SEL>,
|
|
<&topckgen CLK_TOP_F10M_REF_SEL>,
|
|
<ðsys CLK_ETH_ESW_EN>,
|
|
<ðsys CLK_ETH_GP0_EN>,
|
|
<ðsys CLK_ETH_GP1_EN>,
|
|
<ðsys CLK_ETH_GP2_EN>,
|
|
<ðsys CLK_ETH_FE_EN>,
|
|
<&sgmiisys0 CLK_SGMII_TX_EN>,
|
|
<&sgmiisys0 CLK_SGMII_RX_EN>,
|
|
<&sgmiisys0 CLK_SGMII_CDR_REF>,
|
|
<&sgmiisys0 CLK_SGMII_CDR_FB>,
|
|
<&sgmiisys1 CLK_SGMII_TX_EN>,
|
|
<&sgmiisys1 CLK_SGMII_RX_EN>,
|
|
<&sgmiisys1 CLK_SGMII_CDR_REF>,
|
|
<&sgmiisys1 CLK_SGMII_CDR_FB>,
|
|
<&apmixedsys CLK_APMIXED_SGMIPLL>,
|
|
<&apmixedsys CLK_APMIXED_ETH2PLL>;
|
|
clock-names = "ethif", "sgmiitop", "esw", "gp0", "gp1",
|
|
"gp2", "fe", "sgmii_tx250m", "sgmii_rx250m",
|
|
"sgmii_cdr_ref", "sgmii_cdr_fb",
|
|
"sgmii2_tx250m", "sgmii2_rx250m",
|
|
"sgmii2_cdr_ref", "sgmii2_cdr_fb",
|
|
"sgmii_ck", "eth2pll";
|
|
assigned-clocks = <&topckgen CLK_TOP_ETH_SEL>,
|
|
<&topckgen CLK_TOP_F10M_REF_SEL>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_UNIVPLL1_D2>,
|
|
<&topckgen CLK_TOP_SGMIIPLL_D2>;
|
|
power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>;
|
|
mediatek,ethsys = <ðsys>;
|
|
mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>;
|
|
mediatek,infracfg = <&infracfg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sgmiisys0: syscon@1b128000 {
|
|
compatible = "mediatek,mt7629-sgmiisys", "syscon";
|
|
reg = <0x1b128000 0x3000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
sgmiisys1: syscon@1b130000 {
|
|
compatible = "mediatek,mt7629-sgmiisys", "syscon";
|
|
reg = <0x1b130000 0x3000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
};
|