mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
abe60a3a7a
Remove the usage of skeleton.dtsi in the remaining dts files. It was
deprecated since commit 9c0da3cc61 ("ARM: dts: explicitly mark
skeleton.dtsi as deprecated"). This will make adding a unit-address to
memory nodes easier.
The main tricky part to removing skeleton.dtsi is we could end up with
no /memory node at all when a bootloader depends on one being present. I
hacked up dtc to check for this condition.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
711 lines
19 KiB
Plaintext
711 lines
19 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2015 MediaTek Inc.
|
|
* Author: Erin.Lo <erin.lo@mediatek.com>
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/clock/mt2701-clk.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <dt-bindings/power/mt2701-power.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/memory/mt2701-larb-port.h>
|
|
#include <dt-bindings/reset/mt2701-resets.h>
|
|
#include "mt2701-pinfunc.h"
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
compatible = "mediatek,mt2701";
|
|
interrupt-parent = <&cirq>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
enable-method = "mediatek,mt81xx-tz-smp";
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x0>;
|
|
};
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x1>;
|
|
};
|
|
cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x2>;
|
|
};
|
|
cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x3>;
|
|
};
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
trustzone-bootinfo@80002000 {
|
|
compatible = "mediatek,trustzone-bootinfo";
|
|
reg = <0 0x80002000 0 0x1000>;
|
|
};
|
|
};
|
|
|
|
system_clk: dummy13m {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <13000000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
rtc_clk: dummy32k {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32000>;
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
clk26m: oscillator@0 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <26000000>;
|
|
clock-output-names = "clk26m";
|
|
};
|
|
|
|
rtc32k: oscillator@1 {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32000>;
|
|
clock-output-names = "rtc32k";
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu_thermal: cpu_thermal {
|
|
polling-delay-passive = <1000>; /* milliseconds */
|
|
polling-delay = <1000>; /* milliseconds */
|
|
|
|
thermal-sensors = <&thermal 0>;
|
|
sustainable-power = <1000>;
|
|
|
|
trips {
|
|
threshold: trip-point@0 {
|
|
temperature = <68000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
target: trip-point@1 {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
cpu_crit: cpu_crit@0 {
|
|
temperature = <115000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupt-parent = <&gic>;
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
topckgen: syscon@10000000 {
|
|
compatible = "mediatek,mt2701-topckgen", "syscon";
|
|
reg = <0 0x10000000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
infracfg: syscon@10001000 {
|
|
compatible = "mediatek,mt2701-infracfg", "syscon";
|
|
reg = <0 0x10001000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
pericfg: syscon@10003000 {
|
|
compatible = "mediatek,mt2701-pericfg", "syscon";
|
|
reg = <0 0x10003000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
syscfg_pctl_a: syscfg@10005000 {
|
|
compatible = "mediatek,mt2701-pctl-a-syscfg", "syscon";
|
|
reg = <0 0x10005000 0 0x1000>;
|
|
};
|
|
|
|
scpsys: scpsys@10006000 {
|
|
compatible = "mediatek,mt2701-scpsys", "syscon";
|
|
#power-domain-cells = <1>;
|
|
reg = <0 0x10006000 0 0x1000>;
|
|
infracfg = <&infracfg>;
|
|
clocks = <&topckgen CLK_TOP_MM_SEL>,
|
|
<&topckgen CLK_TOP_MFG_SEL>,
|
|
<&topckgen CLK_TOP_ETHIF_SEL>;
|
|
clock-names = "mm", "mfg", "ethif";
|
|
};
|
|
|
|
watchdog: watchdog@10007000 {
|
|
compatible = "mediatek,mt2701-wdt",
|
|
"mediatek,mt6589-wdt";
|
|
reg = <0 0x10007000 0 0x100>;
|
|
};
|
|
|
|
timer: timer@10008000 {
|
|
compatible = "mediatek,mt2701-timer",
|
|
"mediatek,mt6577-timer";
|
|
reg = <0 0x10008000 0 0x80>;
|
|
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&system_clk>, <&rtc_clk>;
|
|
clock-names = "system-clk", "rtc-clk";
|
|
};
|
|
|
|
pio: pinctrl@1000b000 {
|
|
compatible = "mediatek,mt2701-pinctrl";
|
|
reg = <0 0x1000b000 0 0x1000>;
|
|
mediatek,pctl-regmap = <&syscfg_pctl_a>;
|
|
pins-are-numbered;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
smi_common: smi@1000c000 {
|
|
compatible = "mediatek,mt2701-smi-common";
|
|
reg = <0 0x1000c000 0 0x1000>;
|
|
clocks = <&infracfg CLK_INFRA_SMI>,
|
|
<&mmsys CLK_MM_SMI_COMMON>,
|
|
<&infracfg CLK_INFRA_SMI>;
|
|
clock-names = "apb", "smi", "async";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
|
|
};
|
|
|
|
sysirq: interrupt-controller@10200100 {
|
|
compatible = "mediatek,mt2701-sysirq",
|
|
"mediatek,mt6577-sysirq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
reg = <0 0x10200100 0 0x1c>;
|
|
};
|
|
|
|
cirq: interrupt-controller@10204000 {
|
|
compatible = "mediatek,mt2701-cirq",
|
|
"mediatek,mtk-cirq";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&sysirq>;
|
|
reg = <0 0x10204000 0 0x400>;
|
|
mediatek,ext-irq-range = <32 200>;
|
|
};
|
|
|
|
iommu: mmsys_iommu@10205000 {
|
|
compatible = "mediatek,mt2701-m4u";
|
|
reg = <0 0x10205000 0 0x1000>;
|
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&infracfg CLK_INFRA_M4U>;
|
|
clock-names = "bclk";
|
|
mediatek,larbs = <&larb0 &larb1 &larb2>;
|
|
#iommu-cells = <1>;
|
|
};
|
|
|
|
apmixedsys: syscon@10209000 {
|
|
compatible = "mediatek,mt2701-apmixedsys", "syscon";
|
|
reg = <0 0x10209000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
gic: interrupt-controller@10211000 {
|
|
compatible = "arm,cortex-a7-gic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
interrupt-parent = <&gic>;
|
|
reg = <0 0x10211000 0 0x1000>,
|
|
<0 0x10212000 0 0x2000>,
|
|
<0 0x10214000 0 0x2000>,
|
|
<0 0x10216000 0 0x2000>;
|
|
};
|
|
|
|
auxadc: adc@11001000 {
|
|
compatible = "mediatek,mt2701-auxadc";
|
|
reg = <0 0x11001000 0 0x1000>;
|
|
clocks = <&pericfg CLK_PERI_AUXADC>;
|
|
clock-names = "main";
|
|
#io-channel-cells = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@11002000 {
|
|
compatible = "mediatek,mt2701-uart",
|
|
"mediatek,mt6577-uart";
|
|
reg = <0 0x11002000 0 0x400>;
|
|
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@11003000 {
|
|
compatible = "mediatek,mt2701-uart",
|
|
"mediatek,mt6577-uart";
|
|
reg = <0 0x11003000 0 0x400>;
|
|
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@11004000 {
|
|
compatible = "mediatek,mt2701-uart",
|
|
"mediatek,mt6577-uart";
|
|
reg = <0 0x11004000 0 0x400>;
|
|
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@11005000 {
|
|
compatible = "mediatek,mt2701-uart",
|
|
"mediatek,mt6577-uart";
|
|
reg = <0 0x11005000 0 0x400>;
|
|
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
|
|
clock-names = "baud", "bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c0: i2c@11007000 {
|
|
compatible = "mediatek,mt2701-i2c",
|
|
"mediatek,mt6577-i2c";
|
|
reg = <0 0x11007000 0 0x70>,
|
|
<0 0x11000200 0 0x80>;
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
|
|
clock-div = <16>;
|
|
clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
|
|
clock-names = "main", "dma";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@11008000 {
|
|
compatible = "mediatek,mt2701-i2c",
|
|
"mediatek,mt6577-i2c";
|
|
reg = <0 0x11008000 0 0x70>,
|
|
<0 0x11000280 0 0x80>;
|
|
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>;
|
|
clock-div = <16>;
|
|
clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
|
|
clock-names = "main", "dma";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@11009000 {
|
|
compatible = "mediatek,mt2701-i2c",
|
|
"mediatek,mt6577-i2c";
|
|
reg = <0 0x11009000 0 0x70>,
|
|
<0 0x11000300 0 0x80>;
|
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>;
|
|
clock-div = <16>;
|
|
clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
|
|
clock-names = "main", "dma";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@1100a000 {
|
|
compatible = "mediatek,mt2701-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0 0x1100a000 0 0x100>;
|
|
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
|
|
<&topckgen CLK_TOP_SPI0_SEL>,
|
|
<&pericfg CLK_PERI_SPI0>;
|
|
clock-names = "parent-clk", "sel-clk", "spi-clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
thermal: thermal@1100b000 {
|
|
#thermal-sensor-cells = <0>;
|
|
compatible = "mediatek,mt2701-thermal";
|
|
reg = <0 0x1100b000 0 0x1000>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
|
|
clock-names = "therm", "auxadc";
|
|
resets = <&pericfg MT2701_PERI_THERM_SW_RST>;
|
|
reset-names = "therm";
|
|
mediatek,auxadc = <&auxadc>;
|
|
mediatek,apmixedsys = <&apmixedsys>;
|
|
};
|
|
|
|
nandc: nfi@1100d000 {
|
|
compatible = "mediatek,mt2701-nfc";
|
|
reg = <0 0x1100d000 0 0x1000>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_NFI>,
|
|
<&pericfg CLK_PERI_NFI_PAD>;
|
|
clock-names = "nfi_clk", "pad_clk";
|
|
status = "disabled";
|
|
ecc-engine = <&bch>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
bch: ecc@1100e000 {
|
|
compatible = "mediatek,mt2701-ecc";
|
|
reg = <0 0x1100e000 0 0x1000>;
|
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&pericfg CLK_PERI_NFI_ECC>;
|
|
clock-names = "nfiecc_clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
nor_flash: spi@11014000 {
|
|
compatible = "mediatek,mt2701-nor",
|
|
"mediatek,mt8173-nor";
|
|
reg = <0 0x11014000 0 0xe0>;
|
|
clocks = <&pericfg CLK_PERI_FLASH>,
|
|
<&topckgen CLK_TOP_FLASH_SEL>;
|
|
clock-names = "spi", "sf";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@11016000 {
|
|
compatible = "mediatek,mt2701-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0 0x11016000 0 0x100>;
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
|
|
<&topckgen CLK_TOP_SPI1_SEL>,
|
|
<&pericfg CLK_PERI_SPI1>;
|
|
clock-names = "parent-clk", "sel-clk", "spi-clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi2: spi@11017000 {
|
|
compatible = "mediatek,mt2701-spi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0 0x11017000 0 0x1000>;
|
|
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_SYSPLL3_D2>,
|
|
<&topckgen CLK_TOP_SPI2_SEL>,
|
|
<&pericfg CLK_PERI_SPI2>;
|
|
clock-names = "parent-clk", "sel-clk", "spi-clk";
|
|
status = "disabled";
|
|
};
|
|
|
|
audsys: clock-controller@11220000 {
|
|
compatible = "mediatek,mt2701-audsys", "syscon";
|
|
reg = <0 0x11220000 0 0x2000>;
|
|
#clock-cells = <1>;
|
|
|
|
afe: audio-controller {
|
|
compatible = "mediatek,mt2701-audio";
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 132 IRQ_TYPE_LEVEL_LOW>;
|
|
interrupt-names = "afe", "asys";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
|
|
|
|
clocks = <&infracfg CLK_INFRA_AUDIO>,
|
|
<&topckgen CLK_TOP_AUD_MUX1_SEL>,
|
|
<&topckgen CLK_TOP_AUD_MUX2_SEL>,
|
|
<&topckgen CLK_TOP_AUD_48K_TIMING>,
|
|
<&topckgen CLK_TOP_AUD_44K_TIMING>,
|
|
<&topckgen CLK_TOP_AUD_K1_SRC_SEL>,
|
|
<&topckgen CLK_TOP_AUD_K2_SRC_SEL>,
|
|
<&topckgen CLK_TOP_AUD_K3_SRC_SEL>,
|
|
<&topckgen CLK_TOP_AUD_K4_SRC_SEL>,
|
|
<&topckgen CLK_TOP_AUD_K1_SRC_DIV>,
|
|
<&topckgen CLK_TOP_AUD_K2_SRC_DIV>,
|
|
<&topckgen CLK_TOP_AUD_K3_SRC_DIV>,
|
|
<&topckgen CLK_TOP_AUD_K4_SRC_DIV>,
|
|
<&topckgen CLK_TOP_AUD_I2S1_MCLK>,
|
|
<&topckgen CLK_TOP_AUD_I2S2_MCLK>,
|
|
<&topckgen CLK_TOP_AUD_I2S3_MCLK>,
|
|
<&topckgen CLK_TOP_AUD_I2S4_MCLK>,
|
|
<&audsys CLK_AUD_I2SO1>,
|
|
<&audsys CLK_AUD_I2SO2>,
|
|
<&audsys CLK_AUD_I2SO3>,
|
|
<&audsys CLK_AUD_I2SO4>,
|
|
<&audsys CLK_AUD_I2SIN1>,
|
|
<&audsys CLK_AUD_I2SIN2>,
|
|
<&audsys CLK_AUD_I2SIN3>,
|
|
<&audsys CLK_AUD_I2SIN4>,
|
|
<&audsys CLK_AUD_ASRCO1>,
|
|
<&audsys CLK_AUD_ASRCO2>,
|
|
<&audsys CLK_AUD_ASRCO3>,
|
|
<&audsys CLK_AUD_ASRCO4>,
|
|
<&audsys CLK_AUD_AFE>,
|
|
<&audsys CLK_AUD_AFE_CONN>,
|
|
<&audsys CLK_AUD_A1SYS>,
|
|
<&audsys CLK_AUD_A2SYS>,
|
|
<&audsys CLK_AUD_AFE_MRGIF>;
|
|
|
|
clock-names = "infra_sys_audio_clk",
|
|
"top_audio_mux1_sel",
|
|
"top_audio_mux2_sel",
|
|
"top_audio_a1sys_hp",
|
|
"top_audio_a2sys_hp",
|
|
"i2s0_src_sel",
|
|
"i2s1_src_sel",
|
|
"i2s2_src_sel",
|
|
"i2s3_src_sel",
|
|
"i2s0_src_div",
|
|
"i2s1_src_div",
|
|
"i2s2_src_div",
|
|
"i2s3_src_div",
|
|
"i2s0_mclk_en",
|
|
"i2s1_mclk_en",
|
|
"i2s2_mclk_en",
|
|
"i2s3_mclk_en",
|
|
"i2so0_hop_ck",
|
|
"i2so1_hop_ck",
|
|
"i2so2_hop_ck",
|
|
"i2so3_hop_ck",
|
|
"i2si0_hop_ck",
|
|
"i2si1_hop_ck",
|
|
"i2si2_hop_ck",
|
|
"i2si3_hop_ck",
|
|
"asrc0_out_ck",
|
|
"asrc1_out_ck",
|
|
"asrc2_out_ck",
|
|
"asrc3_out_ck",
|
|
"audio_afe_pd",
|
|
"audio_afe_conn_pd",
|
|
"audio_a1sys_pd",
|
|
"audio_a2sys_pd",
|
|
"audio_mrgif_pd";
|
|
|
|
assigned-clocks = <&topckgen CLK_TOP_AUD_MUX1_SEL>,
|
|
<&topckgen CLK_TOP_AUD_MUX2_SEL>,
|
|
<&topckgen CLK_TOP_AUD_MUX1_DIV>,
|
|
<&topckgen CLK_TOP_AUD_MUX2_DIV>;
|
|
assigned-clock-parents = <&topckgen CLK_TOP_AUD1PLL_98M>,
|
|
<&topckgen CLK_TOP_AUD2PLL_90M>;
|
|
assigned-clock-rates = <0>, <0>, <49152000>, <45158400>;
|
|
};
|
|
};
|
|
|
|
mmsys: syscon@14000000 {
|
|
compatible = "mediatek,mt2701-mmsys", "syscon";
|
|
reg = <0 0x14000000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
bls: pwm@1400a000 {
|
|
compatible = "mediatek,mt2701-disp-pwm";
|
|
reg = <0 0x1400a000 0 0x1000>;
|
|
#pwm-cells = <2>;
|
|
clocks = <&mmsys CLK_MM_MDP_BLS_26M>, <&mmsys CLK_MM_DISP_BLS>;
|
|
clock-names = "main", "mm";
|
|
status = "disabled";
|
|
};
|
|
|
|
larb0: larb@14010000 {
|
|
compatible = "mediatek,mt2701-smi-larb";
|
|
reg = <0 0x14010000 0 0x1000>;
|
|
mediatek,smi = <&smi_common>;
|
|
mediatek,larb-id = <0>;
|
|
clocks = <&mmsys CLK_MM_SMI_LARB0>,
|
|
<&mmsys CLK_MM_SMI_LARB0>;
|
|
clock-names = "apb", "smi";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_DISP>;
|
|
};
|
|
|
|
imgsys: syscon@15000000 {
|
|
compatible = "mediatek,mt2701-imgsys", "syscon";
|
|
reg = <0 0x15000000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
larb2: larb@15001000 {
|
|
compatible = "mediatek,mt2701-smi-larb";
|
|
reg = <0 0x15001000 0 0x1000>;
|
|
mediatek,smi = <&smi_common>;
|
|
mediatek,larb-id = <2>;
|
|
clocks = <&imgsys CLK_IMG_SMI_COMM>,
|
|
<&imgsys CLK_IMG_SMI_COMM>;
|
|
clock-names = "apb", "smi";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
|
|
};
|
|
|
|
jpegdec: jpegdec@15004000 {
|
|
compatible = "mediatek,mt2701-jpgdec";
|
|
reg = <0 0x15004000 0 0x1000>;
|
|
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&imgsys CLK_IMG_JPGDEC_SMI>,
|
|
<&imgsys CLK_IMG_JPGDEC>;
|
|
clock-names = "jpgdec-smi",
|
|
"jpgdec";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
|
|
mediatek,larb = <&larb2>;
|
|
iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
|
|
<&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
|
|
};
|
|
|
|
vdecsys: syscon@16000000 {
|
|
compatible = "mediatek,mt2701-vdecsys", "syscon";
|
|
reg = <0 0x16000000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
larb1: larb@16010000 {
|
|
compatible = "mediatek,mt2701-smi-larb";
|
|
reg = <0 0x16010000 0 0x1000>;
|
|
mediatek,smi = <&smi_common>;
|
|
mediatek,larb-id = <1>;
|
|
clocks = <&vdecsys CLK_VDEC_CKGEN>,
|
|
<&vdecsys CLK_VDEC_LARB>;
|
|
clock-names = "apb", "smi";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_VDEC>;
|
|
};
|
|
|
|
hifsys: syscon@1a000000 {
|
|
compatible = "mediatek,mt2701-hifsys", "syscon";
|
|
reg = <0 0x1a000000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
usb0: usb@1a1c0000 {
|
|
compatible = "mediatek,mt8173-xhci";
|
|
reg = <0 0x1a1c0000 0 0x1000>,
|
|
<0 0x1a1c4700 0 0x0100>;
|
|
reg-names = "mac", "ippc";
|
|
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&hifsys CLK_HIFSYS_USB0PHY>,
|
|
<&topckgen CLK_TOP_ETHIF_SEL>;
|
|
clock-names = "sys_ck", "ref_ck";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
|
|
phys = <&u2port0 PHY_TYPE_USB2>, <&u3port0 PHY_TYPE_USB3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
u3phy0: usb-phy@1a1c4000 {
|
|
compatible = "mediatek,mt2701-u3phy";
|
|
reg = <0 0x1a1c4000 0 0x0700>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
u2port0: usb-phy@1a1c4800 {
|
|
reg = <0 0x1a1c4800 0 0x0100>;
|
|
clocks = <&topckgen CLK_TOP_USB_PHY48M>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
u3port0: usb-phy@1a1c4900 {
|
|
reg = <0 0x1a1c4900 0 0x0700>;
|
|
clocks = <&clk26m>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
usb1: usb@1a240000 {
|
|
compatible = "mediatek,mt8173-xhci";
|
|
reg = <0 0x1a240000 0 0x1000>,
|
|
<0 0x1a244700 0 0x0100>;
|
|
reg-names = "mac", "ippc";
|
|
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&hifsys CLK_HIFSYS_USB1PHY>,
|
|
<&topckgen CLK_TOP_ETHIF_SEL>;
|
|
clock-names = "sys_ck", "ref_ck";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_HIF>;
|
|
phys = <&u2port1 PHY_TYPE_USB2>, <&u3port1 PHY_TYPE_USB3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
u3phy1: usb-phy@1a244000 {
|
|
compatible = "mediatek,mt2701-u3phy";
|
|
reg = <0 0x1a244000 0 0x0700>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
status = "disabled";
|
|
|
|
u2port1: usb-phy@1a244800 {
|
|
reg = <0 0x1a244800 0 0x0100>;
|
|
clocks = <&topckgen CLK_TOP_USB_PHY48M>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
|
|
u3port1: usb-phy@1a244900 {
|
|
reg = <0 0x1a244900 0 0x0700>;
|
|
clocks = <&clk26m>;
|
|
clock-names = "ref";
|
|
#phy-cells = <1>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
ethsys: syscon@1b000000 {
|
|
compatible = "mediatek,mt2701-ethsys", "syscon";
|
|
reg = <0 0x1b000000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
eth: ethernet@1b100000 {
|
|
compatible = "mediatek,mt2701-eth", "syscon";
|
|
reg = <0 0x1b100000 0 0x20000>;
|
|
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 199 IRQ_TYPE_LEVEL_LOW>,
|
|
<GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
|
|
clocks = <&topckgen CLK_TOP_ETHIF_SEL>,
|
|
<ðsys CLK_ETHSYS_ESW>,
|
|
<ðsys CLK_ETHSYS_GP1>,
|
|
<ðsys CLK_ETHSYS_GP2>,
|
|
<&apmixedsys CLK_APMIXED_TRGPLL>;
|
|
clock-names = "ethif", "esw", "gp1", "gp2", "trgpll";
|
|
resets = <ðsys MT2701_ETHSYS_FE_RST>,
|
|
<ðsys MT2701_ETHSYS_GMAC_RST>,
|
|
<ðsys MT2701_ETHSYS_PPE_RST>;
|
|
reset-names = "fe", "gmac", "ppe";
|
|
power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
|
|
mediatek,ethsys = <ðsys>;
|
|
mediatek,pctl = <&syscfg_pctl_a>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
bdpsys: syscon@1c000000 {
|
|
compatible = "mediatek,mt2701-bdpsys", "syscon";
|
|
reg = <0 0x1c000000 0 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|