mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-16 08:44:21 +08:00
12afc0cf81
The default is enabled, and there should be no need to reconfigure the status for SoC internal devices in the board specific files. Only the USB PHY used needs to be configured in the board specific files. Cc: Bin Liu <b-liu@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
197 lines
5.3 KiB
Plaintext
197 lines
5.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2015 Phytec Messtechnik GmbH
|
|
* Author: Teresa Remmet <t.remmet@phytec.de>
|
|
*/
|
|
|
|
/ {
|
|
model = "Phytec AM335x phyBOARD-WEGA";
|
|
compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
|
|
|
|
sound: sound_iface {
|
|
compatible = "ti,da830-evm-audio";
|
|
};
|
|
|
|
vcc3v3: fixedregulator1 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
/* Audio */
|
|
&am33xx_pinmux {
|
|
mcasp0_pins: pinmux_mcasp0 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
tlv320aic3007: tlv320aic3007@18 {
|
|
compatible = "ti,tlv320aic3007";
|
|
reg = <0x18>;
|
|
AVDD-supply = <&vcc3v3>;
|
|
IOVDD-supply = <&vcc3v3>;
|
|
DRVDD-supply = <&vcc3v3>;
|
|
DVDD-supply = <&vdig1_reg>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&mcasp0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mcasp0_pins>;
|
|
op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
|
|
tdm-slots = <2>;
|
|
serial-dir = <
|
|
2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
|
|
>;
|
|
tx-num-evt = <16>;
|
|
rt-num-evt = <16>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sound {
|
|
ti,model = "AM335x-Wega";
|
|
ti,audio-codec = <&tlv320aic3007>;
|
|
ti,mcasp-controller = <&mcasp0>;
|
|
ti,audio-routing =
|
|
"Line Out", "LLOUT",
|
|
"Line Out", "RLOUT",
|
|
"LINE1L", "Line In",
|
|
"LINE1R", "Line In";
|
|
clocks = <&mcasp0_fck>;
|
|
clock-names = "mclk";
|
|
status = "okay";
|
|
};
|
|
|
|
/* CAN Busses */
|
|
&am33xx_pinmux {
|
|
dcan1_pins: pinmux_dcan1 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
|
|
AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&dcan1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&dcan1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Ethernet */
|
|
&am33xx_pinmux {
|
|
ethernet1_pins: pinmux_ethernet1 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1) /* gpmc_a0.mii2_txen */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a1.mii2_rxdv */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1) /* gpmc_a2.mii2_txd3 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1) /* gpmc_a3.mii2_txd2 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1) /* gpmc_a4.mii2_txd1 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1) /* gpmc_a5.mii2_txd0 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a6.mii2_txclk */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a7.mii2_rxclk */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a8.mii2_rxd3 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a9.mii2_rxd2 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a10.mii2_rxd1 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_a11.mii2_rxd0 */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_wpn.mii2_rxerr */
|
|
AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1) /* gpmc_ben1.mii2_col */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy-handle = <&phy1>;
|
|
phy-mode = "mii";
|
|
dual_emac_res_vlan = <2>;
|
|
};
|
|
|
|
&davinci_mdio {
|
|
phy1: ethernet-phy@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
&mac {
|
|
slaves = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <ðernet0_pins ðernet1_pins>;
|
|
dual_emac = <1>;
|
|
};
|
|
|
|
/* MMC */
|
|
&am33xx_pinmux {
|
|
mmc1_pins: pinmux_mmc1 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7) /* spi0_cs1.mmc0_sdcd */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&mmc1 {
|
|
vmmc-supply = <&vcc3v3>;
|
|
bus-width = <4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
|
status = "okay";
|
|
};
|
|
|
|
/* Power */
|
|
&vdig1_reg {
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
/* UARTs */
|
|
&am33xx_pinmux {
|
|
uart0_pins: pinmux_uart0 {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
|
>;
|
|
};
|
|
|
|
uart1_pins: pinmux_uart1_pins {
|
|
pinctrl-single,pins = <
|
|
AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
|
|
AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
|
|
>;
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
};
|