linux/arch/arm/mach-omap1/board-ams-delta.c
Janusz Krzysztofik d65777d1a2 ASoC: ams_delta: use GPIO lookup table
Now as the Amstrad Delta board provides GPIO lookup tables, switch from
GPIO numbers to GPIO descriptors and use the table to locate required
GPIO pins.

The card uses two pins, one for jack and the other for voice modem
codec DAI control.

For jack pin, remove hardcoded GPIO number and use GPIO descriptor
based variant of jack GPIO initialization.

For modem_codec pin, declare static variable for storing its GPIO
descriptor, obtain it on card initialization and replace obsolete
ams_delta_latch2_write() with gpiod_set_value().  For that to work,
don't request the modem_codec pin from the board init code anymore.

If the modem_codec GPIO lookup fails, skip initialization of
functionality of the card which depends on its availability.

Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.

Created and tested against linux-4.17-rc3, on top of patch 1/6 "ARM:
OMAP1: ams-delta: add GPIO lookup tables"

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-05-23 11:47:32 -07:00

740 lines
18 KiB
C

/*
* linux/arch/arm/mach-omap1/board-ams-delta.c
*
* Modified from board-generic.c
*
* Board specific inits for the Amstrad E3 (codename Delta) videophone
*
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/serial_8250.h>
#include <linux/export.h>
#include <linux/omapfb.h>
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
#include <media/soc_camera.h>
#include <asm/serial.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/board-ams-delta.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/mux.h>
#include <mach/hardware.h>
#include <mach/ams-delta-fiq.h>
#include "camera.h"
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
static const unsigned int ams_delta_keymap[] = {
KEY(0, 0, KEY_F1), /* Advert */
KEY(0, 3, KEY_COFFEE), /* Games */
KEY(0, 2, KEY_QUESTION), /* Directory */
KEY(2, 3, KEY_CONNECT), /* Internet */
KEY(1, 2, KEY_SHOP), /* Services */
KEY(1, 1, KEY_PHONE), /* VoiceMail */
KEY(0, 1, KEY_DELETE), /* Delete */
KEY(2, 2, KEY_PLAY), /* Play */
KEY(1, 0, KEY_PAGEUP), /* Up */
KEY(1, 3, KEY_PAGEDOWN), /* Down */
KEY(2, 0, KEY_EMAIL), /* ReadEmail */
KEY(2, 1, KEY_STOP), /* Stop */
/* Numeric keypad portion */
KEY(0, 7, KEY_KP1),
KEY(0, 6, KEY_KP2),
KEY(0, 5, KEY_KP3),
KEY(1, 7, KEY_KP4),
KEY(1, 6, KEY_KP5),
KEY(1, 5, KEY_KP6),
KEY(2, 7, KEY_KP7),
KEY(2, 6, KEY_KP8),
KEY(2, 5, KEY_KP9),
KEY(3, 6, KEY_KP0),
KEY(3, 7, KEY_KPASTERISK),
KEY(3, 5, KEY_KPDOT), /* # key */
KEY(7, 2, KEY_NUMLOCK), /* Mute */
KEY(7, 1, KEY_KPMINUS), /* Recall */
KEY(6, 1, KEY_KPPLUS), /* Redial */
KEY(7, 6, KEY_KPSLASH), /* Handsfree */
KEY(6, 0, KEY_ENTER), /* Video */
KEY(7, 4, KEY_CAMERA), /* Photo */
KEY(0, 4, KEY_F2), /* Home */
KEY(1, 4, KEY_F3), /* Office */
KEY(2, 4, KEY_F4), /* Mobile */
KEY(7, 7, KEY_F5), /* SMS */
KEY(7, 5, KEY_F6), /* Email */
/* QWERTY portion of keypad */
KEY(3, 4, KEY_Q),
KEY(3, 3, KEY_W),
KEY(3, 2, KEY_E),
KEY(3, 1, KEY_R),
KEY(3, 0, KEY_T),
KEY(4, 7, KEY_Y),
KEY(4, 6, KEY_U),
KEY(4, 5, KEY_I),
KEY(4, 4, KEY_O),
KEY(4, 3, KEY_P),
KEY(4, 2, KEY_A),
KEY(4, 1, KEY_S),
KEY(4, 0, KEY_D),
KEY(5, 7, KEY_F),
KEY(5, 6, KEY_G),
KEY(5, 5, KEY_H),
KEY(5, 4, KEY_J),
KEY(5, 3, KEY_K),
KEY(5, 2, KEY_L),
KEY(5, 1, KEY_Z),
KEY(5, 0, KEY_X),
KEY(6, 7, KEY_C),
KEY(6, 6, KEY_V),
KEY(6, 5, KEY_B),
KEY(6, 4, KEY_N),
KEY(6, 3, KEY_M),
KEY(6, 2, KEY_SPACE),
KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
};
#define LATCH1_PHYS 0x01000000
#define LATCH1_VIRT 0xEA000000
#define MODEM_PHYS 0x04000000
#define MODEM_VIRT 0xEB000000
#define LATCH2_PHYS 0x08000000
#define LATCH2_VIRT 0xEC000000
static struct map_desc ams_delta_io_desc[] __initdata = {
/* AMS_DELTA_LATCH1 */
{
.virtual = LATCH1_VIRT,
.pfn = __phys_to_pfn(LATCH1_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_LATCH2 */
{
.virtual = LATCH2_VIRT,
.pfn = __phys_to_pfn(LATCH2_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
},
/* AMS_DELTA_MODEM */
{
.virtual = MODEM_VIRT,
.pfn = __phys_to_pfn(MODEM_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
}
};
static const struct omap_lcd_config ams_delta_lcd_config __initconst = {
.ctrl_name = "internal",
};
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
.pins[0] = 2,
};
#define LATCH1_GPIO_BASE 232
#define LATCH1_NGPIO 8
static struct resource latch1_resources[] = {
[0] = {
.name = "dat",
.start = LATCH1_PHYS,
.end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
.flags = IORESOURCE_MEM,
},
};
static struct bgpio_pdata latch1_pdata = {
.base = LATCH1_GPIO_BASE,
.ngpio = LATCH1_NGPIO,
};
static struct platform_device latch1_gpio_device = {
.name = "basic-mmio-gpio",
.id = 0,
.resource = latch1_resources,
.num_resources = ARRAY_SIZE(latch1_resources),
.dev = {
.platform_data = &latch1_pdata,
},
};
static struct resource latch2_resources[] = {
[0] = {
.name = "dat",
.start = LATCH2_PHYS,
.end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
.flags = IORESOURCE_MEM,
},
};
#define LATCH2_LABEL "latch2"
static struct bgpio_pdata latch2_pdata = {
.label = LATCH2_LABEL,
.base = AMS_DELTA_LATCH2_GPIO_BASE,
.ngpio = AMS_DELTA_LATCH2_NGPIO,
};
static struct platform_device latch2_gpio_device = {
.name = "basic-mmio-gpio",
.id = 1,
.resource = latch2_resources,
.num_resources = ARRAY_SIZE(latch2_resources),
.dev = {
.platform_data = &latch2_pdata,
},
};
#define LATCH2_PIN_LCD_VBLEN 0
#define LATCH2_PIN_LCD_NDISP 1
#define LATCH2_PIN_NAND_NCE 2
#define LATCH2_PIN_NAND_NRE 3
#define LATCH2_PIN_NAND_NWP 4
#define LATCH2_PIN_NAND_NWE 5
#define LATCH2_PIN_NAND_ALE 6
#define LATCH2_PIN_NAND_CLE 7
#define LATCH2_PIN_KEYBRD_PWR 8
#define LATCH2_PIN_KEYBRD_DATAOUT 9
#define LATCH2_PIN_SCARD_RSTIN 10
#define LATCH2_PIN_SCARD_CMDVCC 11
#define LATCH2_PIN_MODEM_NRESET 12
#define LATCH2_PIN_MODEM_CODEC 13
#define LATCH2_PIN_HOOKFLASH1 14
#define LATCH2_PIN_HOOKFLASH2 15
static const struct gpio latch_gpios[] __initconst = {
{
.gpio = LATCH1_GPIO_BASE + 6,
.flags = GPIOF_OUT_INIT_LOW,
.label = "dockit1",
},
{
.gpio = LATCH1_GPIO_BASE + 7,
.flags = GPIOF_OUT_INIT_LOW,
.label = "dockit2",
},
{
.gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
.flags = GPIOF_OUT_INIT_LOW,
.label = "scard_rstin",
},
{
.gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
.flags = GPIOF_OUT_INIT_LOW,
.label = "scard_cmdvcc",
},
{
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
.flags = GPIOF_OUT_INIT_LOW,
.label = "hookflash1",
},
{
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
.flags = GPIOF_OUT_INIT_LOW,
.label = "hookflash2",
},
};
static struct regulator_consumer_supply modem_nreset_consumers[] = {
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
REGULATOR_SUPPLY("POR", "cx20442-codec"),
};
static struct regulator_init_data modem_nreset_data = {
.constraints = {
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers),
.consumer_supplies = modem_nreset_consumers,
};
static struct fixed_voltage_config modem_nreset_config = {
.supply_name = "modem_nreset",
.microvolts = 3300000,
.gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
.startup_delay = 25000,
.enable_high = 1,
.enabled_at_boot = 1,
.init_data = &modem_nreset_data,
};
static struct platform_device modem_nreset_device = {
.name = "reg-fixed-voltage",
.id = -1,
.dev = {
.platform_data = &modem_nreset_config,
},
};
struct modem_private_data {
struct regulator *regulator;
};
static struct modem_private_data modem_priv;
void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
{
int bit = 0;
u16 bitpos = 1 << bit;
for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
if (!(mask & bitpos))
continue;
else
gpio_set_value(base + bit, (value & bitpos) != 0);
}
}
EXPORT_SYMBOL(ams_delta_latch_write);
static struct resource ams_delta_nand_resources[] = {
[0] = {
.start = OMAP1_MPUIO_BASE,
.end = OMAP1_MPUIO_BASE +
OMAP_MPUIO_IO_CNTL + sizeof(u32) - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device ams_delta_nand_device = {
.name = "ams-delta-nand",
.id = -1,
.num_resources = ARRAY_SIZE(ams_delta_nand_resources),
.resource = ams_delta_nand_resources,
};
#define OMAP_GPIO_LABEL "gpio-0-15"
static struct gpiod_lookup_table ams_delta_nand_gpio_table = {
.table = {
GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_NAND_RB, "rdy",
0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NCE, "nce", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NRE, "nre", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWP, "nwp", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_NWE, "nwe", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_ALE, "ale", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_NAND_CLE, "cle", 0),
{ },
},
};
static struct resource ams_delta_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static const struct matrix_keymap_data ams_delta_keymap_data = {
.keymap = ams_delta_keymap,
.keymap_size = ARRAY_SIZE(ams_delta_keymap),
};
static struct omap_kp_platform_data ams_delta_kp_data = {
.rows = 8,
.cols = 8,
.keymap_data = &ams_delta_keymap_data,
.delay = 9,
};
static struct platform_device ams_delta_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &ams_delta_kp_data,
},
.num_resources = ARRAY_SIZE(ams_delta_kp_resources),
.resource = ams_delta_kp_resources,
};
static struct platform_device ams_delta_lcd_device = {
.name = "lcd_ams_delta",
.id = -1,
};
static struct gpiod_lookup_table ams_delta_lcd_gpio_table = {
.table = {
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_VBLEN, "vblen", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_LCD_NDISP, "ndisp", 0),
{ },
},
};
static const struct gpio_led gpio_leds[] __initconst = {
{
.name = "camera",
.gpio = LATCH1_GPIO_BASE + 0,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
#ifdef CONFIG_LEDS_TRIGGERS
.default_trigger = "ams_delta_camera",
#endif
},
{
.name = "advert",
.gpio = LATCH1_GPIO_BASE + 1,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "email",
.gpio = LATCH1_GPIO_BASE + 2,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "handsfree",
.gpio = LATCH1_GPIO_BASE + 3,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "voicemail",
.gpio = LATCH1_GPIO_BASE + 4,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
{
.name = "voice",
.gpio = LATCH1_GPIO_BASE + 5,
.default_state = LEDS_GPIO_DEFSTATE_OFF,
},
};
static const struct gpio_led_platform_data leds_pdata __initconst = {
.leds = gpio_leds,
.num_leds = ARRAY_SIZE(gpio_leds),
};
static struct i2c_board_info ams_delta_camera_board_info[] = {
{
I2C_BOARD_INFO("ov6650", 0x60),
},
};
#ifdef CONFIG_LEDS_TRIGGERS
DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
static int ams_delta_camera_power(struct device *dev, int power)
{
/*
* turn on camera LED
*/
if (power)
led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
else
led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
return 0;
}
#else
#define ams_delta_camera_power NULL
#endif
static struct soc_camera_link ams_delta_iclink = {
.bus_id = 0, /* OMAP1 SoC camera bus */
.i2c_adapter_id = 1,
.board_info = &ams_delta_camera_board_info[0],
.module_name = "ov6650",
.power = ams_delta_camera_power,
};
static struct platform_device ams_delta_camera_device = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &ams_delta_iclink,
},
};
static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
.camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */
.lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */
};
static struct platform_device ams_delta_audio_device = {
.name = "ams-delta-audio",
.id = -1,
};
static struct gpiod_lookup_table ams_delta_audio_gpio_table = {
.table = {
GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_HOOK_SWITCH,
"hook_switch", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_MODEM_CODEC,
"modem_codec", 0),
{ },
},
};
static struct platform_device cx20442_codec_device = {
.name = "cx20442-codec",
.id = -1,
};
static struct gpiod_lookup_table ams_delta_serio_gpio_table = {
.table = {
GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_DATA,
"data", 0),
GPIO_LOOKUP(OMAP_GPIO_LABEL, AMS_DELTA_GPIO_PIN_KEYBRD_CLK,
"clock", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_PWR,
"power", 0),
GPIO_LOOKUP(LATCH2_LABEL, LATCH2_PIN_KEYBRD_DATAOUT,
"dataout", 0),
{ },
},
};
static struct platform_device *ams_delta_devices[] __initdata = {
&latch1_gpio_device,
&latch2_gpio_device,
&ams_delta_kp_device,
&ams_delta_camera_device,
&ams_delta_audio_device,
};
static struct platform_device *late_devices[] __initdata = {
&ams_delta_nand_device,
&ams_delta_lcd_device,
&cx20442_codec_device,
};
static struct gpiod_lookup_table *ams_delta_gpio_tables[] __initdata = {
&ams_delta_audio_gpio_table,
&ams_delta_serio_gpio_table,
};
static struct gpiod_lookup_table *late_gpio_tables[] __initdata = {
&ams_delta_lcd_gpio_table,
&ams_delta_nand_gpio_table,
};
static void __init ams_delta_init(void)
{
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
/* parallel camera interface */
omap_cfg_reg(H19_1610_CAM_EXCLK);
omap_cfg_reg(J15_1610_CAM_LCLK);
omap_cfg_reg(L18_1610_CAM_VS);
omap_cfg_reg(L15_1610_CAM_HS);
omap_cfg_reg(L19_1610_CAM_D0);
omap_cfg_reg(K14_1610_CAM_D1);
omap_cfg_reg(K15_1610_CAM_D2);
omap_cfg_reg(K19_1610_CAM_D3);
omap_cfg_reg(K18_1610_CAM_D4);
omap_cfg_reg(J14_1610_CAM_D5);
omap_cfg_reg(J19_1610_CAM_D6);
omap_cfg_reg(J18_1610_CAM_D7);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap1_usb_init(&ams_delta_usb_config);
omap1_set_camera_info(&ams_delta_camera_platform_data);
#ifdef CONFIG_LEDS_TRIGGERS
led_trigger_register_simple("ams_delta_camera",
&ams_delta_camera_led_trigger);
#endif
gpio_led_register_device(-1, &leds_pdata);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
/*
* As soon as devices have been registered, assign their dev_names
* to respective GPIO lookup tables before they are added.
*/
ams_delta_audio_gpio_table.dev_id =
dev_name(&ams_delta_audio_device.dev);
/*
* No device name is assigned to GPIO lookup table for serio device
* as long as serio driver is not converted to platform device driver.
*/
gpiod_add_lookup_tables(ams_delta_gpio_tables,
ARRAY_SIZE(ams_delta_gpio_tables));
ams_delta_init_fiq();
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
omapfb_set_lcd_config(&ams_delta_lcd_config);
}
static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
{
struct modem_private_data *priv = port->private_data;
int ret;
if (IS_ERR(priv->regulator))
return;
if (state == old)
return;
if (state == 0)
ret = regulator_enable(priv->regulator);
else if (old == 0)
ret = regulator_disable(priv->regulator);
else
ret = 0;
if (ret)
dev_warn(port->dev,
"ams_delta modem_pm: failed to %sable regulator: %d\n",
state ? "dis" : "en", ret);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
.membase = IOMEM(MODEM_VIRT),
.mapbase = MODEM_PHYS,
.irq = -EINVAL, /* changed later */
.flags = UPF_BOOT_AUTOCONF,
.irqflags = IRQF_TRIGGER_RISING,
.iotype = UPIO_MEM,
.regshift = 1,
.uartclk = BASE_BAUD * 16,
.pm = modem_pm,
.private_data = &modem_priv,
},
{ },
};
static struct platform_device ams_delta_modem_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev = {
.platform_data = ams_delta_modem_ports,
},
};
static int __init late_init(void)
{
int err;
if (!machine_is_ams_delta())
return -ENODEV;
err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
if (err) {
pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
return err;
}
platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
/*
* As soon as devices have been registered, assign their dev_names
* to respective GPIO lookup tables before they are added.
*/
ams_delta_lcd_gpio_table.dev_id = dev_name(&ams_delta_lcd_device.dev);
ams_delta_nand_gpio_table.dev_id = dev_name(&ams_delta_nand_device.dev);
gpiod_add_lookup_tables(late_gpio_tables, ARRAY_SIZE(late_gpio_tables));
err = platform_device_register(&modem_nreset_device);
if (err) {
pr_err("Couldn't register the modem regulator device\n");
return err;
}
omap_cfg_reg(M14_1510_GPIO2);
ams_delta_modem_ports[0].irq =
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
if (err) {
pr_err("Couldn't request gpio pin for modem\n");
return err;
}
gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
/* Initialize the modem_nreset regulator consumer before use */
modem_priv.regulator = ERR_PTR(-ENODEV);
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
AMS_DELTA_LATCH2_MODEM_CODEC);
err = platform_device_register(&ams_delta_modem_device);
if (err)
goto gpio_free;
/*
* Once the modem device is registered, the modem_nreset
* regulator can be requested on behalf of that device.
*/
modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
"RESET#");
if (IS_ERR(modem_priv.regulator)) {
err = PTR_ERR(modem_priv.regulator);
goto unregister;
}
return 0;
unregister:
platform_device_unregister(&ams_delta_modem_device);
gpio_free:
gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
return err;
}
static void __init ams_delta_init_late(void)
{
omap1_init_late();
late_init();
}
static void __init ams_delta_map_io(void)
{
omap15xx_map_io();
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
}
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
.atag_offset = 0x100,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.init_irq = omap1_init_irq,
.handle_irq = omap1_handle_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
.init_time = omap1_timer_init,
.restart = omap1_restart,
MACHINE_END