mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-28 06:34:12 +08:00
50535df3ee
The symbol <debug_locks> conflicts with the rather global one in include/linux/locks.h. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
338 lines
9.9 KiB
C
338 lines
9.9 KiB
C
#ifndef _AHA152X_H
|
|
#define _AHA152X_H
|
|
|
|
/*
|
|
* $Id: aha152x.h,v 2.7 2004/01/24 11:39:03 fischer Exp $
|
|
*/
|
|
|
|
/* number of queueable commands
|
|
(unless we support more than 1 cmd_per_lun this should do) */
|
|
#define AHA152X_MAXQUEUE 7
|
|
|
|
#define AHA152X_REVID "Adaptec 152x SCSI driver; $Revision: 2.7 $"
|
|
|
|
/* port addresses */
|
|
#define SCSISEQ (HOSTIOPORT0+0x00) /* SCSI sequence control */
|
|
#define SXFRCTL0 (HOSTIOPORT0+0x01) /* SCSI transfer control 0 */
|
|
#define SXFRCTL1 (HOSTIOPORT0+0x02) /* SCSI transfer control 1 */
|
|
#define SCSISIG (HOSTIOPORT0+0x03) /* SCSI signal in/out */
|
|
#define SCSIRATE (HOSTIOPORT0+0x04) /* SCSI rate control */
|
|
#define SELID (HOSTIOPORT0+0x05) /* selection/reselection ID */
|
|
#define SCSIID SELID /* SCSI ID */
|
|
#define SCSIDAT (HOSTIOPORT0+0x06) /* SCSI latched data */
|
|
#define SCSIBUS (HOSTIOPORT0+0x07) /* SCSI data bus */
|
|
#define STCNT0 (HOSTIOPORT0+0x08) /* SCSI transfer count 0 */
|
|
#define STCNT1 (HOSTIOPORT0+0x09) /* SCSI transfer count 1 */
|
|
#define STCNT2 (HOSTIOPORT0+0x0a) /* SCSI transfer count 2 */
|
|
#define SSTAT0 (HOSTIOPORT0+0x0b) /* SCSI interrupt status 0 */
|
|
#define SSTAT1 (HOSTIOPORT0+0x0c) /* SCSI interrupt status 1 */
|
|
#define SSTAT2 (HOSTIOPORT0+0x0d) /* SCSI interrupt status 2 */
|
|
#define SCSITEST (HOSTIOPORT0+0x0e) /* SCSI test control */
|
|
#define SSTAT3 SCSITEST /* SCSI interrupt status 3 */
|
|
#define SSTAT4 (HOSTIOPORT0+0x0f) /* SCSI status 4 */
|
|
#define SIMODE0 (HOSTIOPORT1+0x10) /* SCSI interrupt mode 0 */
|
|
#define SIMODE1 (HOSTIOPORT1+0x11) /* SCSI interrupt mode 1 */
|
|
#define DMACNTRL0 (HOSTIOPORT1+0x12) /* DMA control 0 */
|
|
#define DMACNTRL1 (HOSTIOPORT1+0x13) /* DMA control 1 */
|
|
#define DMASTAT (HOSTIOPORT1+0x14) /* DMA status */
|
|
#define FIFOSTAT (HOSTIOPORT1+0x15) /* FIFO status */
|
|
#define DATAPORT (HOSTIOPORT1+0x16) /* DATA port */
|
|
#define BRSTCNTRL (HOSTIOPORT1+0x18) /* burst control */
|
|
#define PORTA (HOSTIOPORT1+0x1a) /* PORT A */
|
|
#define PORTB (HOSTIOPORT1+0x1b) /* PORT B */
|
|
#define REV (HOSTIOPORT1+0x1c) /* revision */
|
|
#define STACK (HOSTIOPORT1+0x1d) /* stack */
|
|
#define TEST (HOSTIOPORT1+0x1e) /* test register */
|
|
|
|
#define IO_RANGE 0x20
|
|
|
|
/* used in aha152x_porttest */
|
|
#define O_PORTA 0x1a /* PORT A */
|
|
#define O_PORTB 0x1b /* PORT B */
|
|
#define O_DMACNTRL1 0x13 /* DMA control 1 */
|
|
#define O_STACK 0x1d /* stack */
|
|
|
|
/* used in tc1550_porttest */
|
|
#define O_TC_PORTA 0x0a /* PORT A */
|
|
#define O_TC_PORTB 0x0b /* PORT B */
|
|
#define O_TC_DMACNTRL1 0x03 /* DMA control 1 */
|
|
#define O_TC_STACK 0x0d /* stack */
|
|
|
|
/* bits and bitmasks to ports */
|
|
|
|
/* SCSI sequence control */
|
|
#define TEMODEO 0x80
|
|
#define ENSELO 0x40
|
|
#define ENSELI 0x20
|
|
#define ENRESELI 0x10
|
|
#define ENAUTOATNO 0x08
|
|
#define ENAUTOATNI 0x04
|
|
#define ENAUTOATNP 0x02
|
|
#define SCSIRSTO 0x01
|
|
|
|
/* SCSI transfer control 0 */
|
|
#define SCSIEN 0x80
|
|
#define DMAEN 0x40
|
|
#define CH1 0x20
|
|
#define CLRSTCNT 0x10
|
|
#define SPIOEN 0x08
|
|
#define CLRCH1 0x02
|
|
|
|
/* SCSI transfer control 1 */
|
|
#define BITBUCKET 0x80
|
|
#define SWRAPEN 0x40
|
|
#define ENSPCHK 0x20
|
|
#define STIMESEL 0x18 /* mask */
|
|
#define STIMESEL_ 3
|
|
#define ENSTIMER 0x04
|
|
#define BYTEALIGN 0x02
|
|
|
|
/* SCSI signal IN */
|
|
#define SIG_CDI 0x80
|
|
#define SIG_IOI 0x40
|
|
#define SIG_MSGI 0x20
|
|
#define SIG_ATNI 0x10
|
|
#define SIG_SELI 0x08
|
|
#define SIG_BSYI 0x04
|
|
#define SIG_REQI 0x02
|
|
#define SIG_ACKI 0x01
|
|
|
|
/* SCSI Phases */
|
|
#define P_MASK (SIG_MSGI|SIG_CDI|SIG_IOI)
|
|
#define P_DATAO (0)
|
|
#define P_DATAI (SIG_IOI)
|
|
#define P_CMD (SIG_CDI)
|
|
#define P_STATUS (SIG_CDI|SIG_IOI)
|
|
#define P_MSGO (SIG_MSGI|SIG_CDI)
|
|
#define P_MSGI (SIG_MSGI|SIG_CDI|SIG_IOI)
|
|
|
|
/* SCSI signal OUT */
|
|
#define SIG_CDO 0x80
|
|
#define SIG_IOO 0x40
|
|
#define SIG_MSGO 0x20
|
|
#define SIG_ATNO 0x10
|
|
#define SIG_SELO 0x08
|
|
#define SIG_BSYO 0x04
|
|
#define SIG_REQO 0x02
|
|
#define SIG_ACKO 0x01
|
|
|
|
/* SCSI rate control */
|
|
#define SXFR 0x70 /* mask */
|
|
#define SXFR_ 4
|
|
#define SOFS 0x0f /* mask */
|
|
|
|
/* SCSI ID */
|
|
#define OID 0x70
|
|
#define OID_ 4
|
|
#define TID 0x07
|
|
|
|
/* SCSI transfer count */
|
|
#define GETSTCNT() ( (GETPORT(STCNT2)<<16) \
|
|
+ (GETPORT(STCNT1)<< 8) \
|
|
+ GETPORT(STCNT0) )
|
|
|
|
#define SETSTCNT(X) { SETPORT(STCNT2, ((X) & 0xFF0000) >> 16); \
|
|
SETPORT(STCNT1, ((X) & 0x00FF00) >> 8); \
|
|
SETPORT(STCNT0, ((X) & 0x0000FF) ); }
|
|
|
|
/* SCSI interrupt status */
|
|
#define TARGET 0x80
|
|
#define SELDO 0x40
|
|
#define SELDI 0x20
|
|
#define SELINGO 0x10
|
|
#define SWRAP 0x08
|
|
#define SDONE 0x04
|
|
#define SPIORDY 0x02
|
|
#define DMADONE 0x01
|
|
|
|
#define SETSDONE 0x80
|
|
#define CLRSELDO 0x40
|
|
#define CLRSELDI 0x20
|
|
#define CLRSELINGO 0x10
|
|
#define CLRSWRAP 0x08
|
|
#define CLRSDONE 0x04
|
|
#define CLRSPIORDY 0x02
|
|
#define CLRDMADONE 0x01
|
|
|
|
/* SCSI status 1 */
|
|
#define SELTO 0x80
|
|
#define ATNTARG 0x40
|
|
#define SCSIRSTI 0x20
|
|
#define PHASEMIS 0x10
|
|
#define BUSFREE 0x08
|
|
#define SCSIPERR 0x04
|
|
#define PHASECHG 0x02
|
|
#define REQINIT 0x01
|
|
|
|
#define CLRSELTIMO 0x80
|
|
#define CLRATNO 0x40
|
|
#define CLRSCSIRSTI 0x20
|
|
#define CLRBUSFREE 0x08
|
|
#define CLRSCSIPERR 0x04
|
|
#define CLRPHASECHG 0x02
|
|
#define CLRREQINIT 0x01
|
|
|
|
/* SCSI status 2 */
|
|
#define SOFFSET 0x20
|
|
#define SEMPTY 0x10
|
|
#define SFULL 0x08
|
|
#define SFCNT 0x07 /* mask */
|
|
|
|
/* SCSI status 3 */
|
|
#define SCSICNT 0xf0 /* mask */
|
|
#define SCSICNT_ 4
|
|
#define OFFCNT 0x0f /* mask */
|
|
|
|
/* SCSI TEST control */
|
|
#define SCTESTU 0x08
|
|
#define SCTESTD 0x04
|
|
#define STCTEST 0x01
|
|
|
|
/* SCSI status 4 */
|
|
#define SYNCERR 0x04
|
|
#define FWERR 0x02
|
|
#define FRERR 0x01
|
|
|
|
#define CLRSYNCERR 0x04
|
|
#define CLRFWERR 0x02
|
|
#define CLRFRERR 0x01
|
|
|
|
/* SCSI interrupt mode 0 */
|
|
#define ENSELDO 0x40
|
|
#define ENSELDI 0x20
|
|
#define ENSELINGO 0x10
|
|
#define ENSWRAP 0x08
|
|
#define ENSDONE 0x04
|
|
#define ENSPIORDY 0x02
|
|
#define ENDMADONE 0x01
|
|
|
|
/* SCSI interrupt mode 1 */
|
|
#define ENSELTIMO 0x80
|
|
#define ENATNTARG 0x40
|
|
#define ENSCSIRST 0x20
|
|
#define ENPHASEMIS 0x10
|
|
#define ENBUSFREE 0x08
|
|
#define ENSCSIPERR 0x04
|
|
#define ENPHASECHG 0x02
|
|
#define ENREQINIT 0x01
|
|
|
|
/* DMA control 0 */
|
|
#define ENDMA 0x80
|
|
#define _8BIT 0x40
|
|
#define DMA 0x20
|
|
#define WRITE_READ 0x08
|
|
#define INTEN 0x04
|
|
#define RSTFIFO 0x02
|
|
#define SWINT 0x01
|
|
|
|
/* DMA control 1 */
|
|
#define PWRDWN 0x80
|
|
#define STK 0x07 /* mask */
|
|
|
|
/* DMA status */
|
|
#define ATDONE 0x80
|
|
#define WORDRDY 0x40
|
|
#define INTSTAT 0x20
|
|
#define DFIFOFULL 0x10
|
|
#define DFIFOEMP 0x08
|
|
|
|
/* BURST control */
|
|
#define BON 0xf0
|
|
#define BOFF 0x0f
|
|
|
|
/* TEST REGISTER */
|
|
#define BOFFTMR 0x40
|
|
#define BONTMR 0x20
|
|
#define STCNTH 0x10
|
|
#define STCNTM 0x08
|
|
#define STCNTL 0x04
|
|
#define SCSIBLK 0x02
|
|
#define DMABLK 0x01
|
|
|
|
/* On the AHA-152x board PORTA and PORTB contain
|
|
some information about the board's configuration. */
|
|
typedef union {
|
|
struct {
|
|
unsigned reserved:2; /* reserved */
|
|
unsigned tardisc:1; /* Target disconnect: 0=disabled, 1=enabled */
|
|
unsigned syncneg:1; /* Initial sync neg: 0=disabled, 1=enabled */
|
|
unsigned msgclasses:2; /* Message classes
|
|
0=#4
|
|
1=#0, #1, #2, #3, #4
|
|
2=#0, #3, #4
|
|
3=#0, #4
|
|
*/
|
|
unsigned boot:1; /* boot: 0=disabled, 1=enabled */
|
|
unsigned dma:1; /* Transfer mode: 0=PIO; 1=DMA */
|
|
unsigned id:3; /* SCSI-id */
|
|
unsigned irq:2; /* IRQ-Channel: 0,3=12, 1=10, 2=11 */
|
|
unsigned dmachan:2; /* DMA-Channel: 0=0, 1=5, 2=6, 3=7 */
|
|
unsigned parity:1; /* SCSI-parity: 1=enabled 0=disabled */
|
|
} fields;
|
|
unsigned short port;
|
|
} aha152x_config ;
|
|
|
|
#define cf_parity fields.parity
|
|
#define cf_dmachan fields.dmachan
|
|
#define cf_irq fields.irq
|
|
#define cf_id fields.id
|
|
#define cf_dma fields.dma
|
|
#define cf_boot fields.boot
|
|
#define cf_msgclasses fields.msgclasses
|
|
#define cf_syncneg fields.syncneg
|
|
#define cf_tardisc fields.tardisc
|
|
#define cf_port port
|
|
|
|
/* Some macros to manipulate ports and their bits */
|
|
|
|
#define SETPORT(PORT, VAL) outb( (VAL), (PORT) )
|
|
#define GETPORT(PORT) inb( PORT )
|
|
#define SETBITS(PORT, BITS) outb( (inb(PORT) | (BITS)), (PORT) )
|
|
#define CLRBITS(PORT, BITS) outb( (inb(PORT) & ~(BITS)), (PORT) )
|
|
#define TESTHI(PORT, BITS) ((inb(PORT) & (BITS)) == (BITS))
|
|
#define TESTLO(PORT, BITS) ((inb(PORT) & (BITS)) == 0)
|
|
|
|
#define SETRATE(RATE) SETPORT(SCSIRATE,(RATE) & 0x7f)
|
|
|
|
#if defined(AHA152X_DEBUG)
|
|
enum {
|
|
debug_procinfo = 0x0001,
|
|
debug_queue = 0x0002,
|
|
debug_locking = 0x0004,
|
|
debug_intr = 0x0008,
|
|
debug_selection = 0x0010,
|
|
debug_msgo = 0x0020,
|
|
debug_msgi = 0x0040,
|
|
debug_status = 0x0080,
|
|
debug_cmd = 0x0100,
|
|
debug_datai = 0x0200,
|
|
debug_datao = 0x0400,
|
|
debug_eh = 0x0800,
|
|
debug_done = 0x1000,
|
|
debug_phases = 0x2000,
|
|
};
|
|
#endif
|
|
|
|
/* for the pcmcia stub */
|
|
struct aha152x_setup {
|
|
int io_port;
|
|
int irq;
|
|
int scsiid;
|
|
int reconnect;
|
|
int parity;
|
|
int synchronous;
|
|
int delay;
|
|
int ext_trans;
|
|
int tc1550;
|
|
#if defined(AHA152X_DEBUG)
|
|
int debug;
|
|
#endif
|
|
char *conf;
|
|
};
|
|
|
|
struct Scsi_Host *aha152x_probe_one(struct aha152x_setup *);
|
|
void aha152x_release(struct Scsi_Host *);
|
|
int aha152x_host_reset_host(struct Scsi_Host *);
|
|
|
|
#endif /* _AHA152X_H */
|