linux/drivers/gpio/pch_gpio.c
Axel Lin 19234cdda5 gpio: add MODULE_DEVICE_TABLE
The device table is required to load modules based on modaliases.

After adding MODULE_DEVICE_TABLE, below entries will be added to
modules.pcimap:

  pch_gpio             0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
  ml_ioh_gpio          0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-13 15:35:59 -07:00

314 lines
7.2 KiB
C

/*
* Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/gpio.h>
#define PCH_GPIO_ALL_PINS 0xfff /* Mask for GPIO pins 0 to 11 */
#define GPIO_NUM_PINS 12 /* Specifies number of GPIO PINS GPIO0-GPIO11 */
struct pch_regs {
u32 ien;
u32 istatus;
u32 idisp;
u32 iclr;
u32 imask;
u32 imaskclr;
u32 po;
u32 pi;
u32 pm;
u32 im0;
u32 im1;
u32 reserved[4];
u32 reset;
};
/**
* struct pch_gpio_reg_data - The register store data.
* @po_reg: To store contents of PO register.
* @pm_reg: To store contents of PM register.
*/
struct pch_gpio_reg_data {
u32 po_reg;
u32 pm_reg;
};
/**
* struct pch_gpio - GPIO private data structure.
* @base: PCI base address of Memory mapped I/O register.
* @reg: Memory mapped PCH GPIO register list.
* @dev: Pointer to device structure.
* @gpio: Data for GPIO infrastructure.
* @pch_gpio_reg: Memory mapped Register data is saved here
* when suspend.
*/
struct pch_gpio {
void __iomem *base;
struct pch_regs __iomem *reg;
struct device *dev;
struct gpio_chip gpio;
struct pch_gpio_reg_data pch_gpio_reg;
struct mutex lock;
};
static void pch_gpio_set(struct gpio_chip *gpio, unsigned nr, int val)
{
u32 reg_val;
struct pch_gpio *chip = container_of(gpio, struct pch_gpio, gpio);
mutex_lock(&chip->lock);
reg_val = ioread32(&chip->reg->po);
if (val)
reg_val |= (1 << nr);
else
reg_val &= ~(1 << nr);
iowrite32(reg_val, &chip->reg->po);
mutex_unlock(&chip->lock);
}
static int pch_gpio_get(struct gpio_chip *gpio, unsigned nr)
{
struct pch_gpio *chip = container_of(gpio, struct pch_gpio, gpio);
return ioread32(&chip->reg->pi) & (1 << nr);
}
static int pch_gpio_direction_output(struct gpio_chip *gpio, unsigned nr,
int val)
{
struct pch_gpio *chip = container_of(gpio, struct pch_gpio, gpio);
u32 pm;
u32 reg_val;
mutex_lock(&chip->lock);
pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS;
pm |= (1 << nr);
iowrite32(pm, &chip->reg->pm);
reg_val = ioread32(&chip->reg->po);
if (val)
reg_val |= (1 << nr);
else
reg_val &= ~(1 << nr);
mutex_unlock(&chip->lock);
return 0;
}
static int pch_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
{
struct pch_gpio *chip = container_of(gpio, struct pch_gpio, gpio);
u32 pm;
mutex_lock(&chip->lock);
pm = ioread32(&chip->reg->pm) & PCH_GPIO_ALL_PINS; /*bits 0-11*/
pm &= ~(1 << nr);
iowrite32(pm, &chip->reg->pm);
mutex_unlock(&chip->lock);
return 0;
}
/*
* Save register configuration and disable interrupts.
*/
static void pch_gpio_save_reg_conf(struct pch_gpio *chip)
{
chip->pch_gpio_reg.po_reg = ioread32(&chip->reg->po);
chip->pch_gpio_reg.pm_reg = ioread32(&chip->reg->pm);
}
/*
* This function restores the register configuration of the GPIO device.
*/
static void pch_gpio_restore_reg_conf(struct pch_gpio *chip)
{
/* to store contents of PO register */
iowrite32(chip->pch_gpio_reg.po_reg, &chip->reg->po);
/* to store contents of PM register */
iowrite32(chip->pch_gpio_reg.pm_reg, &chip->reg->pm);
}
static void pch_gpio_setup(struct pch_gpio *chip)
{
struct gpio_chip *gpio = &chip->gpio;
gpio->label = dev_name(chip->dev);
gpio->owner = THIS_MODULE;
gpio->direction_input = pch_gpio_direction_input;
gpio->get = pch_gpio_get;
gpio->direction_output = pch_gpio_direction_output;
gpio->set = pch_gpio_set;
gpio->dbg_show = NULL;
gpio->base = -1;
gpio->ngpio = GPIO_NUM_PINS;
gpio->can_sleep = 0;
}
static int __devinit pch_gpio_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
s32 ret;
struct pch_gpio *chip;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
chip->dev = &pdev->dev;
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "%s : pci_enable_device FAILED", __func__);
goto err_pci_enable;
}
ret = pci_request_regions(pdev, KBUILD_MODNAME);
if (ret) {
dev_err(&pdev->dev, "pci_request_regions FAILED-%d", ret);
goto err_request_regions;
}
chip->base = pci_iomap(pdev, 1, 0);
if (chip->base == 0) {
dev_err(&pdev->dev, "%s : pci_iomap FAILED", __func__);
ret = -ENOMEM;
goto err_iomap;
}
chip->reg = chip->base;
pci_set_drvdata(pdev, chip);
mutex_init(&chip->lock);
pch_gpio_setup(chip);
ret = gpiochip_add(&chip->gpio);
if (ret) {
dev_err(&pdev->dev, "PCH gpio: Failed to register GPIO\n");
goto err_gpiochip_add;
}
return 0;
err_gpiochip_add:
pci_iounmap(pdev, chip->base);
err_iomap:
pci_release_regions(pdev);
err_request_regions:
pci_disable_device(pdev);
err_pci_enable:
kfree(chip);
dev_err(&pdev->dev, "%s Failed returns %d\n", __func__, ret);
return ret;
}
static void __devexit pch_gpio_remove(struct pci_dev *pdev)
{
int err;
struct pch_gpio *chip = pci_get_drvdata(pdev);
err = gpiochip_remove(&chip->gpio);
if (err)
dev_err(&pdev->dev, "Failed gpiochip_remove\n");
pci_iounmap(pdev, chip->base);
pci_release_regions(pdev);
pci_disable_device(pdev);
kfree(chip);
}
#ifdef CONFIG_PM
static int pch_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
{
s32 ret;
struct pch_gpio *chip = pci_get_drvdata(pdev);
pch_gpio_save_reg_conf(chip);
pch_gpio_restore_reg_conf(chip);
ret = pci_save_state(pdev);
if (ret) {
dev_err(&pdev->dev, "pci_save_state Failed-%d\n", ret);
return ret;
}
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D0);
ret = pci_enable_wake(pdev, PCI_D0, 1);
if (ret)
dev_err(&pdev->dev, "pci_enable_wake Failed -%d\n", ret);
return 0;
}
static int pch_gpio_resume(struct pci_dev *pdev)
{
s32 ret;
struct pch_gpio *chip = pci_get_drvdata(pdev);
ret = pci_enable_wake(pdev, PCI_D0, 0);
pci_set_power_state(pdev, PCI_D0);
ret = pci_enable_device(pdev);
if (ret) {
dev_err(&pdev->dev, "pci_enable_device Failed-%d ", ret);
return ret;
}
pci_restore_state(pdev);
iowrite32(0x01, &chip->reg->reset);
iowrite32(0x00, &chip->reg->reset);
pch_gpio_restore_reg_conf(chip);
return 0;
}
#else
#define pch_gpio_suspend NULL
#define pch_gpio_resume NULL
#endif
static DEFINE_PCI_DEVICE_TABLE(pch_gpio_pcidev_id) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x8803) },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, pch_gpio_pcidev_id);
static struct pci_driver pch_gpio_driver = {
.name = "pch_gpio",
.id_table = pch_gpio_pcidev_id,
.probe = pch_gpio_probe,
.remove = __devexit_p(pch_gpio_remove),
.suspend = pch_gpio_suspend,
.resume = pch_gpio_resume
};
static int __init pch_gpio_pci_init(void)
{
return pci_register_driver(&pch_gpio_driver);
}
module_init(pch_gpio_pci_init);
static void __exit pch_gpio_pci_exit(void)
{
pci_unregister_driver(&pch_gpio_driver);
}
module_exit(pch_gpio_pci_exit);
MODULE_DESCRIPTION("PCH GPIO PCI Driver");
MODULE_LICENSE("GPL");