korg/linux
0
0
Fork 0
mirror of https://mirrors.bfsu.edu.cn/git/linux.git synced 2024-11-13 23:34:05 +08:00
Code Issues Packages Projects Releases Wiki Activity
9aaeded72f
linux/drivers/video/neofb.c
Christian Trefzer 4efefd1d8e [PATCH] neofb: fix unblank logic interfering with lid toggled backlight 
This is a fix for the most annoying problem that remained with neofb:

After "setterm -powersave powerdown" the console blanker will disable the
backlight after the given timeout expires.  If this happens after the lid
has been shut, we read "LCD off" from the register and store that in the
driver.  Once the lid is opened, the backlight turns on, but any key press
that would awaken the blanked console will switch the backlight off again.

The workaround so far was to use the "display config toggle" Fn key combo -
once if no external display is attached, otherwise as often as required to
restore the desired display setup.

The following patch fixes the issue at least for the LCD-only case, with no
external monitor attached.  Other display setup permutations are pending
further testing, but so far I can guarantee at least no negative change in
behaviour, if any at all.

Signed-off-by: Christian Trefzer <ctrefzer@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26 09:58:31 -07:00

2342 lines
58 KiB
C
Raw Blame History

/*
* linux/drivers/video/neofb.c -- NeoMagic Framebuffer Driver
*
* Copyright (c) 2001-2002 Denis Oliver Kropp <dok@directfb.org>
*
*
* Card specific code is based on XFree86's neomagic driver.
* Framebuffer framework code is based on code of cyber2000fb.
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file COPYING in the main directory of this
* archive for more details.
*
*
* 0.4.1
* - Cosmetic changes (dok)
*
* 0.4
* - Toshiba Libretto support, allow modes larger than LCD size if
* LCD is disabled, keep BIOS settings if internal/external display
* haven't been enabled explicitly
* (Thomas J. Moore <dark@mama.indstate.edu>)
*
* 0.3.3
* - Porting over to new fbdev api. (jsimmons)
*
* 0.3.2
* - got rid of all floating point (dok)
*
* 0.3.1
* - added module license (dok)
*
* 0.3
* - hardware accelerated clear and move for 2200 and above (dok)
* - maximum allowed dotclock is handled now (dok)
*
* 0.2.1
* - correct panning after X usage (dok)
* - added module and kernel parameters (dok)
* - no stretching if external display is enabled (dok)
*
* 0.2
* - initial version (dok)
*
*
* TODO
* - ioctl for internal/external switching
* - blanking
* - 32bit depth support, maybe impossible
* - disable pan-on-sync, need specs
*
* BUGS
* - white margin on bootup like with tdfxfb (colormap problem?)
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/pci.h>
#include <linux/init.h>
#ifdef CONFIG_TOSHIBA
#include <linux/toshiba.h>
extern int tosh_smm(SMMRegisters *regs);
#endif
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
#include <video/vga.h>
#include <video/neomagic.h>
#define NEOFB_VERSION "0.4.2"
/* --------------------------------------------------------------------- */
static int internal;
static int external;
static int libretto;
static int nostretch;
static int nopciburst;
static char *mode_option __devinitdata = NULL;
#ifdef MODULE
MODULE_AUTHOR("(c) 2001-2002 Denis Oliver Kropp <dok@convergence.de>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("FBDev driver for NeoMagic PCI Chips");
module_param(internal, bool, 0);
MODULE_PARM_DESC(internal, "Enable output on internal LCD Display.");
module_param(external, bool, 0);
MODULE_PARM_DESC(external, "Enable output on external CRT.");
module_param(libretto, bool, 0);
MODULE_PARM_DESC(libretto, "Force Libretto 100/110 800x480 LCD.");
module_param(nostretch, bool, 0);
MODULE_PARM_DESC(nostretch,
"Disable stretching of modes smaller than LCD.");
module_param(nopciburst, bool, 0);
MODULE_PARM_DESC(nopciburst, "Disable PCI burst mode.");
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Preferred video mode ('640x480-8@60', etc)");
#endif
/* --------------------------------------------------------------------- */
static biosMode bios8[] = {
{320, 240, 0x40},
{300, 400, 0x42},
{640, 400, 0x20},
{640, 480, 0x21},
{800, 600, 0x23},
{1024, 768, 0x25},
};
static biosMode bios16[] = {
{320, 200, 0x2e},
{320, 240, 0x41},
{300, 400, 0x43},
{640, 480, 0x31},
{800, 600, 0x34},
{1024, 768, 0x37},
};
static biosMode bios24[] = {
{640, 480, 0x32},
{800, 600, 0x35},
{1024, 768, 0x38}
};
#ifdef NO_32BIT_SUPPORT_YET
/* FIXME: guessed values, wrong */
static biosMode bios32[] = {
{640, 480, 0x33},
{800, 600, 0x36},
{1024, 768, 0x39}
};
#endif
static inline void write_le32(int regindex, u32 val, const struct neofb_par *par)
{
writel(val, par->neo2200 + par->cursorOff + regindex);
}
static int neoFindMode(int xres, int yres, int depth)
{
int xres_s;
int i, size;
biosMode *mode;
switch (depth) {
case 8:
size = ARRAY_SIZE(bios8);
mode = bios8;
break;
case 16:
size = ARRAY_SIZE(bios16);
mode = bios16;
break;
case 24:
size = ARRAY_SIZE(bios24);
mode = bios24;
break;
#ifdef NO_32BIT_SUPPORT_YET
case 32:
size = ARRAY_SIZE(bios32);
mode = bios32;
break;
#endif
default:
return 0;
}
for (i = 0; i < size; i++) {
if (xres <= mode[i].x_res) {
xres_s = mode[i].x_res;
for (; i < size; i++) {
if (mode[i].x_res != xres_s)
return mode[i - 1].mode;
if (yres <= mode[i].y_res)
return mode[i].mode;
}
}
}
return mode[size - 1].mode;
}
/*
* neoCalcVCLK --
*
* Determine the closest clock frequency to the one requested.
*/
#define REF_FREQ 0xe517 /* 14.31818 in 20.12 fixed point */
#define MAX_N 127
#define MAX_D 31
#define MAX_F 1
static void neoCalcVCLK(const struct fb_info *info,
struct neofb_par *par, long freq)
{
int n, d, f;
int n_best = 0, d_best = 0, f_best = 0;
long f_best_diff = (0x7ffff << 12); /* 20.12 */
long f_target = (freq << 12) / 1000; /* 20.12 */
for (f = 0; f <= MAX_F; f++)
for (n = 0; n <= MAX_N; n++)
for (d = 0; d <= MAX_D; d++) {
long f_out; /* 20.12 */
long f_diff; /* 20.12 */
f_out =
((((n + 1) << 12) / ((d +
1) *
(1 << f))) >> 12)
* REF_FREQ;
f_diff = abs(f_out - f_target);
if (f_diff < f_best_diff) {
f_best_diff = f_diff;
n_best = n;
d_best = d;
f_best = f;
}
}
if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) {
/* NOT_DONE: We are trying the full range of the 2200 clock.
We should be able to try n up to 2047 */
par->VCLK3NumeratorLow = n_best;
par->VCLK3NumeratorHigh = (f_best << 7);
} else
par->VCLK3NumeratorLow = n_best | (f_best << 7);
par->VCLK3Denominator = d_best;
#ifdef NEOFB_DEBUG
printk("neoVCLK: f:%d NumLow=%d NumHi=%d Den=%d Df=%d\n",
f_target >> 12,
par->VCLK3NumeratorLow,
par->VCLK3NumeratorHigh,
par->VCLK3Denominator, f_best_diff >> 12);
#endif
}
/*
* vgaHWInit --
* Handle the initialization, etc. of a screen.
* Return FALSE on failure.
*/
static int vgaHWInit(const struct fb_var_screeninfo *var,
const struct fb_info *info,
struct neofb_par *par, struct xtimings *timings)
{
par->MiscOutReg = 0x23;
if (!(timings->sync & FB_SYNC_HOR_HIGH_ACT))
par->MiscOutReg |= 0x40;
if (!(timings->sync & FB_SYNC_VERT_HIGH_ACT))
par->MiscOutReg |= 0x80;
/*
* Time Sequencer
*/
par->Sequencer[0] = 0x00;
par->Sequencer[1] = 0x01;
par->Sequencer[2] = 0x0F;
par->Sequencer[3] = 0x00; /* Font select */
par->Sequencer[4] = 0x0E; /* Misc */
/*
* CRTC Controller
*/
par->CRTC[0] = (timings->HTotal >> 3) - 5;
par->CRTC[1] = (timings->HDisplay >> 3) - 1;
par->CRTC[2] = (timings->HDisplay >> 3) - 1;
par->CRTC[3] = (((timings->HTotal >> 3) - 1) & 0x1F) | 0x80;
par->CRTC[4] = (timings->HSyncStart >> 3);
par->CRTC[5] = ((((timings->HTotal >> 3) - 1) & 0x20) << 2)
| (((timings->HSyncEnd >> 3)) & 0x1F);
par->CRTC[6] = (timings->VTotal - 2) & 0xFF;
par->CRTC[7] = (((timings->VTotal - 2) & 0x100) >> 8)
| (((timings->VDisplay - 1) & 0x100) >> 7)
| ((timings->VSyncStart & 0x100) >> 6)
| (((timings->VDisplay - 1) & 0x100) >> 5)
| 0x10 | (((timings->VTotal - 2) & 0x200) >> 4)
| (((timings->VDisplay - 1) & 0x200) >> 3)
| ((timings->VSyncStart & 0x200) >> 2);
par->CRTC[8] = 0x00;
par->CRTC[9] = (((timings->VDisplay - 1) & 0x200) >> 4) | 0x40;
if (timings->dblscan)
par->CRTC[9] |= 0x80;
par->CRTC[10] = 0x00;
par->CRTC[11] = 0x00;
par->CRTC[12] = 0x00;
par->CRTC[13] = 0x00;
par->CRTC[14] = 0x00;
par->CRTC[15] = 0x00;
par->CRTC[16] = timings->VSyncStart & 0xFF;
par->CRTC[17] = (timings->VSyncEnd & 0x0F) | 0x20;
par->CRTC[18] = (timings->VDisplay - 1) & 0xFF;
par->CRTC[19] = var->xres_virtual >> 4;
par->CRTC[20] = 0x00;
par->CRTC[21] = (timings->VDisplay - 1) & 0xFF;
par->CRTC[22] = (timings->VTotal - 1) & 0xFF;
par->CRTC[23] = 0xC3;
par->CRTC[24] = 0xFF;
/*
* are these unnecessary?
* vgaHWHBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN | KGA_ENABLE_ON_ZERO);
* vgaHWVBlankKGA(mode, regp, 0, KGA_FIX_OVERSCAN | KGA_ENABLE_ON_ZERO);
*/
/*
* Graphics Display Controller
*/
par->Graphics[0] = 0x00;
par->Graphics[1] = 0x00;
par->Graphics[2] = 0x00;
par->Graphics[3] = 0x00;
par->Graphics[4] = 0x00;
par->Graphics[5] = 0x40;
par->Graphics[6] = 0x05; /* only map 64k VGA memory !!!! */
par->Graphics[7] = 0x0F;
par->Graphics[8] = 0xFF;
par->Attribute[0] = 0x00; /* standard colormap translation */
par->Attribute[1] = 0x01;
par->Attribute[2] = 0x02;
par->Attribute[3] = 0x03;
par->Attribute[4] = 0x04;
par->Attribute[5] = 0x05;
par->Attribute[6] = 0x06;
par->Attribute[7] = 0x07;
par->Attribute[8] = 0x08;
par->Attribute[9] = 0x09;
par->Attribute[10] = 0x0A;
par->Attribute[11] = 0x0B;
par->Attribute[12] = 0x0C;
par->Attribute[13] = 0x0D;
par->Attribute[14] = 0x0E;
par->Attribute[15] = 0x0F;
par->Attribute[16] = 0x41;
par->Attribute[17] = 0xFF;
par->Attribute[18] = 0x0F;
par->Attribute[19] = 0x00;
par->Attribute[20] = 0x00;
return 0;
}
static void vgaHWLock(struct vgastate *state)
{
/* Protect CRTC[0-7] */
vga_wcrt(state->vgabase, 0x11, vga_rcrt(state->vgabase, 0x11) | 0x80);
}
static void vgaHWUnlock(void)
{
/* Unprotect CRTC[0-7] */
vga_wcrt(NULL, 0x11, vga_rcrt(NULL, 0x11) & ~0x80);
}
static void neoLock(struct vgastate *state)
{
vga_wgfx(state->vgabase, 0x09, 0x00);
vgaHWLock(state);
}
static void neoUnlock(void)
{
vgaHWUnlock();
vga_wgfx(NULL, 0x09, 0x26);
}
/*
* VGA Palette management
*/
static int paletteEnabled = 0;
static inline void VGAenablePalette(void)
{
vga_r(NULL, VGA_IS1_RC);
vga_w(NULL, VGA_ATT_W, 0x00);
paletteEnabled = 1;
}
static inline void VGAdisablePalette(void)
{
vga_r(NULL, VGA_IS1_RC);
vga_w(NULL, VGA_ATT_W, 0x20);
paletteEnabled = 0;
}
static inline void VGAwATTR(u8 index, u8 value)
{
if (paletteEnabled)
index &= ~0x20;
else
index |= 0x20;
vga_r(NULL, VGA_IS1_RC);
vga_wattr(NULL, index, value);
}
static void vgaHWProtect(int on)
{
unsigned char tmp;
if (on) {
/*
* Turn off screen and disable sequencer.
*/
tmp = vga_rseq(NULL, 0x01);
vga_wseq(NULL, 0x00, 0x01); /* Synchronous Reset */
vga_wseq(NULL, 0x01, tmp | 0x20); /* disable the display */
VGAenablePalette();
} else {
/*
* Reenable sequencer, then turn on screen.
*/
tmp = vga_rseq(NULL, 0x01);
vga_wseq(NULL, 0x01, tmp & ~0x20); /* reenable display */
vga_wseq(NULL, 0x00, 0x03); /* clear synchronousreset */
VGAdisablePalette();
}
}
static void vgaHWRestore(const struct fb_info *info,
const struct neofb_par *par)
{
int i;
vga_w(NULL, VGA_MIS_W, par->MiscOutReg);
for (i = 1; i < 5; i++)
vga_wseq(NULL, i, par->Sequencer[i]);
/* Ensure CRTC registers 0-7 are unlocked by clearing bit 7 or CRTC[17] */
vga_wcrt(NULL, 17, par->CRTC[17] & ~0x80);
for (i = 0; i < 25; i++)
vga_wcrt(NULL, i, par->CRTC[i]);
for (i = 0; i < 9; i++)
vga_wgfx(NULL, i, par->Graphics[i]);
VGAenablePalette();
for (i = 0; i < 21; i++)
VGAwATTR(i, par->Attribute[i]);
VGAdisablePalette();
}
/* -------------------- Hardware specific routines ------------------------- */
/*
* Hardware Acceleration for Neo2200+
*/
static inline int neo2200_sync(struct fb_info *info)
{
struct neofb_par *par = info->par;
while (readl(&par->neo2200->bltStat) & 1);
return 0;
}
static inline void neo2200_wait_fifo(struct fb_info *info,
int requested_fifo_space)
{
// ndev->neo.waitfifo_calls++;
// ndev->neo.waitfifo_sum += requested_fifo_space;
/* FIXME: does not work
if (neo_fifo_space < requested_fifo_space)
{
neo_fifo_waitcycles++;
while (1)
{
neo_fifo_space = (neo2200->bltStat >> 8);
if (neo_fifo_space >= requested_fifo_space)
break;
}
}
else
{
neo_fifo_cache_hits++;
}
neo_fifo_space -= requested_fifo_space;
*/
neo2200_sync(info);
}
static inline void neo2200_accel_init(struct fb_info *info,
struct fb_var_screeninfo *var)
{
struct neofb_par *par = info->par;
Neo2200 __iomem *neo2200 = par->neo2200;
u32 bltMod, pitch;
neo2200_sync(info);
switch (var->bits_per_pixel) {
case 8:
bltMod = NEO_MODE1_DEPTH8;
pitch = var->xres_virtual;
break;
case 15:
case 16:
bltMod = NEO_MODE1_DEPTH16;
pitch = var->xres_virtual * 2;
break;
case 24:
bltMod = NEO_MODE1_DEPTH24;
pitch = var->xres_virtual * 3;
break;
default:
printk(KERN_ERR
"neofb: neo2200_accel_init: unexpected bits per pixel!\n");
return;
}
writel(bltMod << 16, &neo2200->bltStat);
writel((pitch << 16) | pitch, &neo2200->pitch);
}
/* --------------------------------------------------------------------- */
static int
neofb_open(struct fb_info *info, int user)
{
struct neofb_par *par = info->par;
int cnt = atomic_read(&par->ref_count);
if (!cnt) {
memset(&par->state, 0, sizeof(struct vgastate));
par->state.flags = VGA_SAVE_MODE | VGA_SAVE_FONTS;
save_vga(&par->state);
}
atomic_inc(&par->ref_count);
return 0;
}
static int
neofb_release(struct fb_info *info, int user)
{
struct neofb_par *par = info->par;
int cnt = atomic_read(&par->ref_count);
if (!cnt)
return -EINVAL;
if (cnt == 1) {
restore_vga(&par->state);
}
atomic_dec(&par->ref_count);
return 0;
}
static int
neofb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
struct neofb_par *par = info->par;
unsigned int pixclock = var->pixclock;
struct xtimings timings;
int memlen, vramlen;
int mode_ok = 0;
DBG("neofb_check_var");
if (!pixclock)
pixclock = 10000; /* 10ns = 100MHz */
timings.pixclock = 1000000000 / pixclock;
if (timings.pixclock < 1)
timings.pixclock = 1;
if (timings.pixclock > par->maxClock)
return -EINVAL;
timings.dblscan = var->vmode & FB_VMODE_DOUBLE;
timings.interlaced = var->vmode & FB_VMODE_INTERLACED;
timings.HDisplay = var->xres;
timings.HSyncStart = timings.HDisplay + var->right_margin;
timings.HSyncEnd = timings.HSyncStart + var->hsync_len;
timings.HTotal = timings.HSyncEnd + var->left_margin;
timings.VDisplay = var->yres;
timings.VSyncStart = timings.VDisplay + var->lower_margin;
timings.VSyncEnd = timings.VSyncStart + var->vsync_len;
timings.VTotal = timings.VSyncEnd + var->upper_margin;
timings.sync = var->sync;
/* Is the mode larger than the LCD panel? */
if (par->internal_display &&
((var->xres > par->NeoPanelWidth) ||
(var->yres > par->NeoPanelHeight))) {
printk(KERN_INFO
"Mode (%dx%d) larger than the LCD panel (%dx%d)\n",
var->xres, var->yres, par->NeoPanelWidth,
par->NeoPanelHeight);
return -EINVAL;
}
/* Is the mode one of the acceptable sizes? */
if (!par->internal_display)
mode_ok = 1;
else {
switch (var->xres) {
case 1280:
if (var->yres == 1024)
mode_ok = 1;
break;
case 1024:
if (var->yres == 768)
mode_ok = 1;
break;
case 800:
if (var->yres == (par->libretto ? 480 : 600))
mode_ok = 1;
break;
case 640:
if (var->yres == 480)
mode_ok = 1;
break;
}
}
if (!mode_ok) {
printk(KERN_INFO
"Mode (%dx%d) won't display properly on LCD\n",
var->xres, var->yres);
return -EINVAL;
}
var->red.msb_right = 0;
var->green.msb_right = 0;
var->blue.msb_right = 0;
switch (var->bits_per_pixel) {
case 8: /* PSEUDOCOLOUR, 256 */
var->transp.offset = 0;
var->transp.length = 0;
var->red.offset = 0;
var->red.length = 8;
var->green.offset = 0;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
break;
case 16: /* DIRECTCOLOUR, 64k */
var->transp.offset = 0;
var->transp.length = 0;
var->red.offset = 11;
var->red.length = 5;
var->green.offset = 5;
var->green.length = 6;
var->blue.offset = 0;
var->blue.length = 5;
break;
case 24: /* TRUECOLOUR, 16m */
var->transp.offset = 0;
var->transp.length = 0;
var->red.offset = 16;
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
break;
#ifdef NO_32BIT_SUPPORT_YET
case 32: /* TRUECOLOUR, 16m */
var->transp.offset = 24;
var->transp.length = 8;
var->red.offset = 16;
var->red.length = 8;
var->green.offset = 8;
var->green.length = 8;
var->blue.offset = 0;
var->blue.length = 8;
break;
#endif
default:
printk(KERN_WARNING "neofb: no support for %dbpp\n",
var->bits_per_pixel);
return -EINVAL;
}
vramlen = info->fix.smem_len;
if (vramlen > 4 * 1024 * 1024)
vramlen = 4 * 1024 * 1024;
if (var->yres_virtual < var->yres)
var->yres_virtual = var->yres;
if (var->xres_virtual < var->xres)
var->xres_virtual = var->xres;
memlen = var->xres_virtual * var->bits_per_pixel * var->yres_virtual >> 3;
if (memlen > vramlen) {
var->yres_virtual = vramlen * 8 / (var->xres_virtual *
var->bits_per_pixel);
memlen = var->xres_virtual * var->bits_per_pixel *
var->yres_virtual / 8;
}
/* we must round yres/xres down, we already rounded y/xres_virtual up
if it was possible. We should return -EINVAL, but I disagree */
if (var->yres_virtual < var->yres)
var->yres = var->yres_virtual;
if (var->xres_virtual < var->xres)
var->xres = var->xres_virtual;
if (var->xoffset + var->xres > var->xres_virtual)
var->xoffset = var->xres_virtual - var->xres;
if (var->yoffset + var->yres > var->yres_virtual)
var->yoffset = var->yres_virtual - var->yres;
var->nonstd = 0;
var->height = -1;
var->width = -1;
if (var->bits_per_pixel >= 24 || !par->neo2200)
var->accel_flags &= ~FB_ACCELF_TEXT;
return 0;
}
static int neofb_set_par(struct fb_info *info)
{
struct neofb_par *par = info->par;
struct xtimings timings;
unsigned char temp;
int i, clock_hi = 0;
int lcd_stretch;
int hoffset, voffset;
DBG("neofb_set_par");
neoUnlock();
vgaHWProtect(1); /* Blank the screen */
timings.dblscan = info->var.vmode & FB_VMODE_DOUBLE;
timings.interlaced = info->var.vmode & FB_VMODE_INTERLACED;
timings.HDisplay = info->var.xres;
timings.HSyncStart = timings.HDisplay + info->var.right_margin;
timings.HSyncEnd = timings.HSyncStart + info->var.hsync_len;
timings.HTotal = timings.HSyncEnd + info->var.left_margin;
timings.VDisplay = info->var.yres;
timings.VSyncStart = timings.VDisplay + info->var.lower_margin;
timings.VSyncEnd = timings.VSyncStart + info->var.vsync_len;
timings.VTotal = timings.VSyncEnd + info->var.upper_margin;
timings.sync = info->var.sync;
timings.pixclock = PICOS2KHZ(info->var.pixclock);
if (timings.pixclock < 1)
timings.pixclock = 1;
/*
* This will allocate the datastructure and initialize all of the
* generic VGA registers.
*/
if (vgaHWInit(&info->var, info, par, &timings))
return -EINVAL;
/*
* The default value assigned by vgaHW.c is 0x41, but this does
* not work for NeoMagic.
*/
par->Attribute[16] = 0x01;
switch (info->var.bits_per_pixel) {
case 8:
par->CRTC[0x13] = info->var.xres_virtual >> 3;
par->ExtCRTOffset = info->var.xres_virtual >> 11;
par->ExtColorModeSelect = 0x11;
break;
case 16:
par->CRTC[0x13] = info->var.xres_virtual >> 2;
par->ExtCRTOffset = info->var.xres_virtual >> 10;
par->ExtColorModeSelect = 0x13;
break;
case 24:
par->CRTC[0x13] = (info->var.xres_virtual * 3) >> 3;
par->ExtCRTOffset = (info->var.xres_virtual * 3) >> 11;
par->ExtColorModeSelect = 0x14;
break;
#ifdef NO_32BIT_SUPPORT_YET
case 32: /* FIXME: guessed values */
par->CRTC[0x13] = info->var.xres_virtual >> 1;
par->ExtCRTOffset = info->var.xres_virtual >> 9;
par->ExtColorModeSelect = 0x15;
break;
#endif
default:
break;
}
par->ExtCRTDispAddr = 0x10;
/* Vertical Extension */
par->VerticalExt = (((timings.VTotal - 2) & 0x400) >> 10)
| (((timings.VDisplay - 1) & 0x400) >> 9)
| (((timings.VSyncStart) & 0x400) >> 8)
| (((timings.VSyncStart) & 0x400) >> 7);
/* Fast write bursts on unless disabled. */
if (par->pci_burst)
par->SysIfaceCntl1 = 0x30;
else
par->SysIfaceCntl1 = 0x00;
par->SysIfaceCntl2 = 0xc0; /* VESA Bios sets this to 0x80! */
/* Initialize: by default, we want display config register to be read */
par->PanelDispCntlRegRead = 1;
/* Enable any user specified display devices. */
par->PanelDispCntlReg1 = 0x00;
if (par->internal_display)
par->PanelDispCntlReg1 |= 0x02;
if (par->external_display)
par->PanelDispCntlReg1 |= 0x01;
/* If the user did not specify any display devices, then... */
if (par->PanelDispCntlReg1 == 0x00) {
/* Default to internal (i.e., LCD) only. */
par->PanelDispCntlReg1 = vga_rgfx(NULL, 0x20) & 0x03;
}
/* If we are using a fixed mode, then tell the chip we are. */
switch (info->var.xres) {
case 1280:
par->PanelDispCntlReg1 |= 0x60;
break;
case 1024:
par->PanelDispCntlReg1 |= 0x40;
break;
case 800:
par->PanelDispCntlReg1 |= 0x20;
break;
case 640:
default:
break;
}
/* Setup shadow register locking. */
switch (par->PanelDispCntlReg1 & 0x03) {
case 0x01: /* External CRT only mode: */
par->GeneralLockReg = 0x00;
/* We need to program the VCLK for external display only mode. */
par->ProgramVCLK = 1;
break;
case 0x02: /* Internal LCD only mode: */
case 0x03: /* Simultaneous internal/external (LCD/CRT) mode: */
par->GeneralLockReg = 0x01;
/* Don't program the VCLK when using the LCD. */
par->ProgramVCLK = 0;
break;
}
/*
* If the screen is to be stretched, turn on stretching for the
* various modes.
*
* OPTION_LCD_STRETCH means stretching should be turned off!
*/
par->PanelDispCntlReg2 = 0x00;
par->PanelDispCntlReg3 = 0x00;
if (par->lcd_stretch && (par->PanelDispCntlReg1 == 0x02) && /* LCD only */
(info->var.xres != par->NeoPanelWidth)) {
switch (info->var.xres) {
case 320: /* Needs testing. KEM -- 24 May 98 */
case 400: /* Needs testing. KEM -- 24 May 98 */
case 640:
case 800:
case 1024:
lcd_stretch = 1;
par->PanelDispCntlReg2 |= 0xC6;
break;
default:
lcd_stretch = 0;
/* No stretching in these modes. */
}
} else
lcd_stretch = 0;
/*
* If the screen is to be centerd, turn on the centering for the
* various modes.
*/
par->PanelVertCenterReg1 = 0x00;
par->PanelVertCenterReg2 = 0x00;
par->PanelVertCenterReg3 = 0x00;
par->PanelVertCenterReg4 = 0x00;
par->PanelVertCenterReg5 = 0x00;
par->PanelHorizCenterReg1 = 0x00;
par->PanelHorizCenterReg2 = 0x00;
par->PanelHorizCenterReg3 = 0x00;
par->PanelHorizCenterReg4 = 0x00;
par->PanelHorizCenterReg5 = 0x00;
if (par->PanelDispCntlReg1 & 0x02) {
if (info->var.xres == par->NeoPanelWidth) {
/*
* No centering required when the requested display width
* equals the panel width.
*/
} else {
par->PanelDispCntlReg2 |= 0x01;
par->PanelDispCntlReg3 |= 0x10;
/* Calculate the horizontal and vertical offsets. */
if (!lcd_stretch) {
hoffset =
((par->NeoPanelWidth -
info->var.xres) >> 4) - 1;
voffset =
((par->NeoPanelHeight -
info->var.yres) >> 1) - 2;
} else {
/* Stretched modes cannot be centered. */
hoffset = 0;
voffset = 0;
}
switch (info->var.xres) {
case 320: /* Needs testing. KEM -- 24 May 98 */
par->PanelHorizCenterReg3 = hoffset;
par->PanelVertCenterReg2 = voffset;
break;
case 400: /* Needs testing. KEM -- 24 May 98 */
par->PanelHorizCenterReg4 = hoffset;
par->PanelVertCenterReg1 = voffset;
break;
case 640:
par->PanelHorizCenterReg1 = hoffset;
par->PanelVertCenterReg3 = voffset;
break;
case 800:
par->PanelHorizCenterReg2 = hoffset;
par->PanelVertCenterReg4 = voffset;
break;
case 1024:
par->PanelHorizCenterReg5 = hoffset;
par->PanelVertCenterReg5 = voffset;
break;
case 1280:
default:
/* No centering in these modes. */
break;
}
}
}
par->biosMode =
neoFindMode(info->var.xres, info->var.yres,
info->var.bits_per_pixel);
/*
* Calculate the VCLK that most closely matches the requested dot
* clock.
*/
neoCalcVCLK(info, par, timings.pixclock);
/* Since we program the clocks ourselves, always use VCLK3. */
par->MiscOutReg |= 0x0C;
/* alread unlocked above */
/* BOGUS vga_wgfx(NULL, 0x09, 0x26); */
/* don't know what this is, but it's 0 from bootup anyway */
vga_wgfx(NULL, 0x15, 0x00);
/* was set to 0x01 by my bios in text and vesa modes */
vga_wgfx(NULL, 0x0A, par->GeneralLockReg);
/*
* The color mode needs to be set before calling vgaHWRestore
* to ensure the DAC is initialized properly.
*
* NOTE: Make sure we don't change bits make sure we don't change
* any reserved bits.
*/
temp = vga_rgfx(NULL, 0x90);
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2070:
temp &= 0xF0; /* Save bits 7:4 */
temp |= (par->ExtColorModeSelect & ~0xF0);
break;
case FB_ACCEL_NEOMAGIC_NM2090:
case FB_ACCEL_NEOMAGIC_NM2093:
case FB_ACCEL_NEOMAGIC_NM2097:
case FB_ACCEL_NEOMAGIC_NM2160:
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
temp &= 0x70; /* Save bits 6:4 */
temp |= (par->ExtColorModeSelect & ~0x70);
break;
}
vga_wgfx(NULL, 0x90, temp);
/*
* In some rare cases a lockup might occur if we don't delay
* here. (Reported by Miles Lane)
*/
//mdelay(200);
/*
* Disable horizontal and vertical graphics and text expansions so
* that vgaHWRestore works properly.
*/
temp = vga_rgfx(NULL, 0x25);
temp &= 0x39;
vga_wgfx(NULL, 0x25, temp);
/*
* Sleep for 200ms to make sure that the two operations above have
* had time to take effect.
*/
mdelay(200);
/*
* This function handles restoring the generic VGA registers. */
vgaHWRestore(info, par);
/* linear colormap for non palettized modes */
switch (info->var.bits_per_pixel) {
case 8:
/* PseudoColor, 256 */
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
break;
case 16:
/* TrueColor, 64k */
info->fix.visual = FB_VISUAL_TRUECOLOR;
for (i = 0; i < 64; i++) {
outb(i, 0x3c8);
outb(i << 1, 0x3c9);
outb(i, 0x3c9);
outb(i << 1, 0x3c9);
}
break;
case 24:
#ifdef NO_32BIT_SUPPORT_YET
case 32:
#endif
/* TrueColor, 16m */
info->fix.visual = FB_VISUAL_TRUECOLOR;
for (i = 0; i < 256; i++) {
outb(i, 0x3c8);
outb(i, 0x3c9);
outb(i, 0x3c9);
outb(i, 0x3c9);
}
break;
}
vga_wgfx(NULL, 0x0E, par->ExtCRTDispAddr);
vga_wgfx(NULL, 0x0F, par->ExtCRTOffset);
temp = vga_rgfx(NULL, 0x10);
temp &= 0x0F; /* Save bits 3:0 */
temp |= (par->SysIfaceCntl1 & ~0x0F); /* VESA Bios sets bit 1! */
vga_wgfx(NULL, 0x10, temp);
vga_wgfx(NULL, 0x11, par->SysIfaceCntl2);
vga_wgfx(NULL, 0x15, 0 /*par->SingleAddrPage */ );
vga_wgfx(NULL, 0x16, 0 /*par->DualAddrPage */ );
temp = vga_rgfx(NULL, 0x20);
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2070:
temp &= 0xFC; /* Save bits 7:2 */
temp |= (par->PanelDispCntlReg1 & ~0xFC);
break;
case FB_ACCEL_NEOMAGIC_NM2090:
case FB_ACCEL_NEOMAGIC_NM2093:
case FB_ACCEL_NEOMAGIC_NM2097:
case FB_ACCEL_NEOMAGIC_NM2160:
temp &= 0xDC; /* Save bits 7:6,4:2 */
temp |= (par->PanelDispCntlReg1 & ~0xDC);
break;
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
temp &= 0x98; /* Save bits 7,4:3 */
temp |= (par->PanelDispCntlReg1 & ~0x98);
break;
}
vga_wgfx(NULL, 0x20, temp);
temp = vga_rgfx(NULL, 0x25);
temp &= 0x38; /* Save bits 5:3 */
temp |= (par->PanelDispCntlReg2 & ~0x38);
vga_wgfx(NULL, 0x25, temp);
if (info->fix.accel != FB_ACCEL_NEOMAGIC_NM2070) {
temp = vga_rgfx(NULL, 0x30);
temp &= 0xEF; /* Save bits 7:5 and bits 3:0 */
temp |= (par->PanelDispCntlReg3 & ~0xEF);
vga_wgfx(NULL, 0x30, temp);
}
vga_wgfx(NULL, 0x28, par->PanelVertCenterReg1);
vga_wgfx(NULL, 0x29, par->PanelVertCenterReg2);
vga_wgfx(NULL, 0x2a, par->PanelVertCenterReg3);
if (info->fix.accel != FB_ACCEL_NEOMAGIC_NM2070) {
vga_wgfx(NULL, 0x32, par->PanelVertCenterReg4);
vga_wgfx(NULL, 0x33, par->PanelHorizCenterReg1);
vga_wgfx(NULL, 0x34, par->PanelHorizCenterReg2);
vga_wgfx(NULL, 0x35, par->PanelHorizCenterReg3);
}
if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2160)
vga_wgfx(NULL, 0x36, par->PanelHorizCenterReg4);
if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) {
vga_wgfx(NULL, 0x36, par->PanelHorizCenterReg4);
vga_wgfx(NULL, 0x37, par->PanelVertCenterReg5);
vga_wgfx(NULL, 0x38, par->PanelHorizCenterReg5);
clock_hi = 1;
}
/* Program VCLK3 if needed. */
if (par->ProgramVCLK && ((vga_rgfx(NULL, 0x9B) != par->VCLK3NumeratorLow)
|| (vga_rgfx(NULL, 0x9F) != par->VCLK3Denominator)
|| (clock_hi && ((vga_rgfx(NULL, 0x8F) & ~0x0f)
!= (par->VCLK3NumeratorHigh &
~0x0F))))) {
vga_wgfx(NULL, 0x9B, par->VCLK3NumeratorLow);
if (clock_hi) {
temp = vga_rgfx(NULL, 0x8F);
temp &= 0x0F; /* Save bits 3:0 */
temp |= (par->VCLK3NumeratorHigh & ~0x0F);
vga_wgfx(NULL, 0x8F, temp);
}
vga_wgfx(NULL, 0x9F, par->VCLK3Denominator);
}
if (par->biosMode)
vga_wcrt(NULL, 0x23, par->biosMode);
vga_wgfx(NULL, 0x93, 0xc0); /* Gives 5x faster framebuffer writes !!! */
/* Program vertical extension register */
if (info->fix.accel == FB_ACCEL_NEOMAGIC_NM2200 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2230 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2360 ||
info->fix.accel == FB_ACCEL_NEOMAGIC_NM2380) {
vga_wcrt(NULL, 0x70, par->VerticalExt);
}
vgaHWProtect(0); /* Turn on screen */
/* Calling this also locks offset registers required in update_start */
neoLock(&par->state);
info->fix.line_length =
info->var.xres_virtual * (info->var.bits_per_pixel >> 3);
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
neo2200_accel_init(info, &info->var);
break;
default:
break;
}
return 0;
}
static void neofb_update_start(struct fb_info *info,
struct fb_var_screeninfo *var)
{
struct neofb_par *par = info->par;
struct vgastate *state = &par->state;
int oldExtCRTDispAddr;
int Base;
DBG("neofb_update_start");
Base = (var->yoffset * var->xres_virtual + var->xoffset) >> 2;
Base *= (var->bits_per_pixel + 7) / 8;
neoUnlock();
/*
* These are the generic starting address registers.
*/
vga_wcrt(state->vgabase, 0x0C, (Base & 0x00FF00) >> 8);
vga_wcrt(state->vgabase, 0x0D, (Base & 0x00FF));
/*
* Make sure we don't clobber some other bits that might already
* have been set. NOTE: NM2200 has a writable bit 3, but it shouldn't
* be needed.
*/
oldExtCRTDispAddr = vga_rgfx(NULL, 0x0E);
vga_wgfx(state->vgabase, 0x0E, (((Base >> 16) & 0x0f) | (oldExtCRTDispAddr & 0xf0)));
neoLock(state);
}
/*
* Pan or Wrap the Display
*/
static int neofb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
u_int y_bottom;
y_bottom = var->yoffset;
if (!(var->vmode & FB_VMODE_YWRAP))
y_bottom += var->yres;
if (var->xoffset > (var->xres_virtual - var->xres))
return -EINVAL;
if (y_bottom > info->var.yres_virtual)
return -EINVAL;
neofb_update_start(info, var);
info->var.xoffset = var->xoffset;
info->var.yoffset = var->yoffset;
if (var->vmode & FB_VMODE_YWRAP)
info->var.vmode |= FB_VMODE_YWRAP;
else
info->var.vmode &= ~FB_VMODE_YWRAP;
return 0;
}
static int neofb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
u_int transp, struct fb_info *fb)
{
if (regno >= fb->cmap.len || regno > 255)
return -EINVAL;
switch (fb->var.bits_per_pixel) {
case 8:
outb(regno, 0x3c8);
outb(red >> 10, 0x3c9);
outb(green >> 10, 0x3c9);
outb(blue >> 10, 0x3c9);
break;
case 16:
((u32 *) fb->pseudo_palette)[regno] =
((red & 0xf800)) | ((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11);
break;
case 24:
((u32 *) fb->pseudo_palette)[regno] =
((red & 0xff00) << 8) | ((green & 0xff00)) |
((blue & 0xff00) >> 8);
break;
#ifdef NO_32BIT_SUPPORT_YET
case 32:
((u32 *) fb->pseudo_palette)[regno] =
((transp & 0xff00) << 16) | ((red & 0xff00) << 8) |
((green & 0xff00)) | ((blue & 0xff00) >> 8);
break;
#endif
default:
return 1;
}
return 0;
}
/*
* (Un)Blank the display.
*/
static int neofb_blank(int blank_mode, struct fb_info *info)
{
/*
* Blank the screen if blank_mode != 0, else unblank.
* Return 0 if blanking succeeded, != 0 if un-/blanking failed due to
* e.g. a video mode which doesn't support it. Implements VESA suspend
* and powerdown modes for monitors, and backlight control on LCDs.
* blank_mode == 0: unblanked (backlight on)
* blank_mode == 1: blank (backlight on)
* blank_mode == 2: suspend vsync (backlight off)
* blank_mode == 3: suspend hsync (backlight off)
* blank_mode == 4: powerdown (backlight off)
*
* wms...Enable VESA DPMS compatible powerdown mode
* run "setterm -powersave powerdown" to take advantage
*/
struct neofb_par *par = info->par;
int seqflags, lcdflags, dpmsflags, reg, tmpdisp;
/*
* Read back the register bits related to display configuration. They might
* have been changed underneath the driver via Fn key stroke.
*/
neoUnlock();
tmpdisp = vga_rgfx(NULL, 0x20) & 0x03;
neoLock(&par->state);
/* In case we blank the screen, we want to store the possibly new
* configuration in the driver. During un-blank, we re-apply this setting,
* since the LCD bit will be cleared in order to switch off the backlight.
*/
if (par->PanelDispCntlRegRead) {
par->PanelDispCntlReg1 = tmpdisp;
}
par->PanelDispCntlRegRead = !blank_mode;
switch (blank_mode) {
case FB_BLANK_POWERDOWN: /* powerdown - both sync lines down */
seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
lcdflags = 0; /* LCD off */
dpmsflags = NEO_GR01_SUPPRESS_HSYNC |
NEO_GR01_SUPPRESS_VSYNC;
#ifdef CONFIG_TOSHIBA
/* Do we still need this ? */
/* attempt to turn off backlight on toshiba; also turns off external */
{
SMMRegisters regs;
regs.eax = 0xff00; /* HCI_SET */
regs.ebx = 0x0002; /* HCI_BACKLIGHT */
regs.ecx = 0x0000; /* HCI_DISABLE */
tosh_smm(&regs);
}
#endif
break;
case FB_BLANK_HSYNC_SUSPEND: /* hsync off */
seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
lcdflags = 0; /* LCD off */
dpmsflags = NEO_GR01_SUPPRESS_HSYNC;
break;
case FB_BLANK_VSYNC_SUSPEND: /* vsync off */
seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
lcdflags = 0; /* LCD off */
dpmsflags = NEO_GR01_SUPPRESS_VSYNC;
break;
case FB_BLANK_NORMAL: /* just blank screen (backlight stays on) */
seqflags = VGA_SR01_SCREEN_OFF; /* Disable sequencer */
/*
* During a blank operation with the LID shut, we might store "LCD off"
* by mistake. Due to timing issues, the BIOS may switch the lights
* back on, and we turn it back off once we "unblank".
*
* So here is an attempt to implement ">=" - if we are in the process
* of unblanking, and the LCD bit is unset in the driver but set in the
* register, we must keep it.
*/
lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */
dpmsflags = 0x00; /* no hsync/vsync suppression */
break;
case FB_BLANK_UNBLANK: /* unblank */
seqflags = 0; /* Enable sequencer */
lcdflags = ((par->PanelDispCntlReg1 | tmpdisp) & 0x02); /* LCD normal */
dpmsflags = 0x00; /* no hsync/vsync suppression */
#ifdef CONFIG_TOSHIBA
/* Do we still need this ? */
/* attempt to re-enable backlight/external on toshiba */
{
SMMRegisters regs;
regs.eax = 0xff00; /* HCI_SET */
regs.ebx = 0x0002; /* HCI_BACKLIGHT */
regs.ecx = 0x0001; /* HCI_ENABLE */
tosh_smm(&regs);
}
#endif
break;
default: /* Anything else we don't understand; return 1 to tell
* fb_blank we didn't aactually do anything */
return 1;
}
neoUnlock();
reg = (vga_rseq(NULL, 0x01) & ~0x20) | seqflags;
vga_wseq(NULL, 0x01, reg);
reg = (vga_rgfx(NULL, 0x20) & ~0x02) | lcdflags;
vga_wgfx(NULL, 0x20, reg);
reg = (vga_rgfx(NULL, 0x01) & ~0xF0) | 0x80 | dpmsflags;
vga_wgfx(NULL, 0x01, reg);
neoLock(&par->state);
return 0;
}
static void
neo2200_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct neofb_par *par = info->par;
u_long dst, rop;
dst = rect->dx + rect->dy * info->var.xres_virtual;
rop = rect->rop ? 0x060000 : 0x0c0000;
neo2200_wait_fifo(info, 4);
/* set blt control */
writel(NEO_BC3_FIFO_EN |
NEO_BC0_SRC_IS_FG | NEO_BC3_SKIP_MAPPING |
// NEO_BC3_DST_XY_ADDR |
// NEO_BC3_SRC_XY_ADDR |
rop, &par->neo2200->bltCntl);
switch (info->var.bits_per_pixel) {
case 8:
writel(rect->color, &par->neo2200->fgColor);
break;
case 16:
case 24:
writel(((u32 *) (info->pseudo_palette))[rect->color],
&par->neo2200->fgColor);
break;
}
writel(dst * ((info->var.bits_per_pixel + 7) >> 3),
&par->neo2200->dstStart);
writel((rect->height << 16) | (rect->width & 0xffff),
&par->neo2200->xyExt);
}
static void
neo2200_copyarea(struct fb_info *info, const struct fb_copyarea *area)
{
u32 sx = area->sx, sy = area->sy, dx = area->dx, dy = area->dy;
struct neofb_par *par = info->par;
u_long src, dst, bltCntl;
bltCntl = NEO_BC3_FIFO_EN | NEO_BC3_SKIP_MAPPING | 0x0C0000;
if ((dy > sy) || ((dy == sy) && (dx > sx))) {
/* Start with the lower right corner */
sy += (area->height - 1);
dy += (area->height - 1);
sx += (area->width - 1);
dx += (area->width - 1);
bltCntl |= NEO_BC0_X_DEC | NEO_BC0_DST_Y_DEC | NEO_BC0_SRC_Y_DEC;
}
src = sx * (info->var.bits_per_pixel >> 3) + sy*info->fix.line_length;
dst = dx * (info->var.bits_per_pixel >> 3) + dy*info->fix.line_length;
neo2200_wait_fifo(info, 4);
/* set blt control */
writel(bltCntl, &par->neo2200->bltCntl);
writel(src, &par->neo2200->srcStart);
writel(dst, &par->neo2200->dstStart);
writel((area->height << 16) | (area->width & 0xffff),
&par->neo2200->xyExt);
}
static void
neo2200_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct neofb_par *par = info->par;
int s_pitch = (image->width * image->depth + 7) >> 3;
int scan_align = info->pixmap.scan_align - 1;
int buf_align = info->pixmap.buf_align - 1;
int bltCntl_flags, d_pitch, data_len;
// The data is padded for the hardware
d_pitch = (s_pitch + scan_align) & ~scan_align;
data_len = ((d_pitch * image->height) + buf_align) & ~buf_align;
neo2200_sync(info);
if (image->depth == 1) {
if (info->var.bits_per_pixel == 24 && image->width < 16) {
/* FIXME. There is a bug with accelerated color-expanded
* transfers in 24 bit mode if the image being transferred
* is less than 16 bits wide. This is due to insufficient
* padding when writing the image. We need to adjust
* struct fb_pixmap. Not yet done. */
return cfb_imageblit(info, image);
}
bltCntl_flags = NEO_BC0_SRC_MONO;
} else if (image->depth == info->var.bits_per_pixel) {
bltCntl_flags = 0;
} else {
/* We don't currently support hardware acceleration if image
* depth is different from display */
return cfb_imageblit(info, image);
}
switch (info->var.bits_per_pixel) {
case 8:
writel(image->fg_color, &par->neo2200->fgColor);
writel(image->bg_color, &par->neo2200->bgColor);
break;
case 16:
case 24:
writel(((u32 *) (info->pseudo_palette))[image->fg_color],
&par->neo2200->fgColor);
writel(((u32 *) (info->pseudo_palette))[image->bg_color],
&par->neo2200->bgColor);
break;
}
writel(NEO_BC0_SYS_TO_VID |
NEO_BC3_SKIP_MAPPING | bltCntl_flags |
// NEO_BC3_DST_XY_ADDR |
0x0c0000, &par->neo2200->bltCntl);
writel(0, &par->neo2200->srcStart);
// par->neo2200->dstStart = (image->dy << 16) | (image->dx & 0xffff);
writel(((image->dx & 0xffff) * (info->var.bits_per_pixel >> 3) +
image->dy * info->fix.line_length), &par->neo2200->dstStart);
writel((image->height << 16) | (image->width & 0xffff),
&par->neo2200->xyExt);
memcpy_toio(par->mmio_vbase + 0x100000, image->data, data_len);
}
static void
neofb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
neo2200_fillrect(info, rect);
break;
default:
cfb_fillrect(info, rect);
break;
}
}
static void
neofb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
{
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
neo2200_copyarea(info, area);
break;
default:
cfb_copyarea(info, area);
break;
}
}
static void
neofb_imageblit(struct fb_info *info, const struct fb_image *image)
{
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
neo2200_imageblit(info, image);
break;
default:
cfb_imageblit(info, image);
break;
}
}
static int
neofb_sync(struct fb_info *info)
{
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
neo2200_sync(info);
break;
default:
break;
}
return 0;
}
/*
static void
neofb_draw_cursor(struct fb_info *info, u8 *dst, u8 *src, unsigned int width)
{
//memset_io(info->sprite.addr, 0xff, 1);
}
static int
neofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
struct neofb_par *par = (struct neofb_par *) info->par;
* Disable cursor *
write_le32(NEOREG_CURSCNTL, ~NEO_CURS_ENABLE, par);
if (cursor->set & FB_CUR_SETPOS) {
u32 x = cursor->image.dx;
u32 y = cursor->image.dy;
info->cursor.image.dx = x;
info->cursor.image.dy = y;
write_le32(NEOREG_CURSX, x, par);
write_le32(NEOREG_CURSY, y, par);
}
if (cursor->set & FB_CUR_SETSIZE) {
info->cursor.image.height = cursor->image.height;
info->cursor.image.width = cursor->image.width;
}
if (cursor->set & FB_CUR_SETHOT)
info->cursor.hot = cursor->hot;
if (cursor->set & FB_CUR_SETCMAP) {
if (cursor->image.depth == 1) {
u32 fg = cursor->image.fg_color;
u32 bg = cursor->image.bg_color;
info->cursor.image.fg_color = fg;
info->cursor.image.bg_color = bg;
fg = ((fg & 0xff0000) >> 16) | ((fg & 0xff) << 16) | (fg & 0xff00);
bg = ((bg & 0xff0000) >> 16) | ((bg & 0xff) << 16) | (bg & 0xff00);
write_le32(NEOREG_CURSFGCOLOR, fg, par);
write_le32(NEOREG_CURSBGCOLOR, bg, par);
}
}
if (cursor->set & FB_CUR_SETSHAPE)
fb_load_cursor_image(info);
if (info->cursor.enable)
write_le32(NEOREG_CURSCNTL, NEO_CURS_ENABLE, par);
return 0;
}
*/
static struct fb_ops neofb_ops = {
.owner = THIS_MODULE,
.fb_open = neofb_open,
.fb_release = neofb_release,
.fb_check_var = neofb_check_var,
.fb_set_par = neofb_set_par,
.fb_setcolreg = neofb_setcolreg,
.fb_pan_display = neofb_pan_display,
.fb_blank = neofb_blank,
.fb_sync = neofb_sync,
.fb_fillrect = neofb_fillrect,
.fb_copyarea = neofb_copyarea,
.fb_imageblit = neofb_imageblit,
};
/* --------------------------------------------------------------------- */
static struct fb_videomode __devinitdata mode800x480 = {
.xres = 800,
.yres = 480,
.pixclock = 25000,
.left_margin = 88,
.right_margin = 40,
.upper_margin = 23,
.lower_margin = 1,
.hsync_len = 128,
.vsync_len = 4,
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
.vmode = FB_VMODE_NONINTERLACED
};
static int __devinit neo_map_mmio(struct fb_info *info,
struct pci_dev *dev)
{
struct neofb_par *par = info->par;
DBG("neo_map_mmio");
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2070:
info->fix.mmio_start = pci_resource_start(dev, 0)+
0x100000;
break;
case FB_ACCEL_NEOMAGIC_NM2090:
case FB_ACCEL_NEOMAGIC_NM2093:
info->fix.mmio_start = pci_resource_start(dev, 0)+
0x200000;
break;
case FB_ACCEL_NEOMAGIC_NM2160:
case FB_ACCEL_NEOMAGIC_NM2097:
case FB_ACCEL_NEOMAGIC_NM2200:
case FB_ACCEL_NEOMAGIC_NM2230:
case FB_ACCEL_NEOMAGIC_NM2360:
case FB_ACCEL_NEOMAGIC_NM2380:
info->fix.mmio_start = pci_resource_start(dev, 1);
break;
default:
info->fix.mmio_start = pci_resource_start(dev, 0);
}
info->fix.mmio_len = MMIO_SIZE;
if (!request_mem_region
(info->fix.mmio_start, MMIO_SIZE, "memory mapped I/O")) {
printk("neofb: memory mapped IO in use\n");
return -EBUSY;
}
par->mmio_vbase = ioremap(info->fix.mmio_start, MMIO_SIZE);
if (!par->mmio_vbase) {
printk("neofb: unable to map memory mapped IO\n");
release_mem_region(info->fix.mmio_start,
info->fix.mmio_len);
return -ENOMEM;
} else
printk(KERN_INFO "neofb: mapped io at %p\n",
par->mmio_vbase);
return 0;
}
static void neo_unmap_mmio(struct fb_info *info)
{
struct neofb_par *par = info->par;
DBG("neo_unmap_mmio");
iounmap(par->mmio_vbase);
par->mmio_vbase = NULL;
release_mem_region(info->fix.mmio_start,
info->fix.mmio_len);
}
static int __devinit neo_map_video(struct fb_info *info,
struct pci_dev *dev, int video_len)
{
//unsigned long addr;
DBG("neo_map_video");
info->fix.smem_start = pci_resource_start(dev, 0);
info->fix.smem_len = video_len;
if (!request_mem_region(info->fix.smem_start, info->fix.smem_len,
"frame buffer")) {
printk("neofb: frame buffer in use\n");
return -EBUSY;
}
info->screen_base =
ioremap(info->fix.smem_start, info->fix.smem_len);
if (!info->screen_base) {
printk("neofb: unable to map screen memory\n");
release_mem_region(info->fix.smem_start,
info->fix.smem_len);
return -ENOMEM;
} else
printk(KERN_INFO "neofb: mapped framebuffer at %p\n",
info->screen_base);
#ifdef CONFIG_MTRR
((struct neofb_par *)(info->par))->mtrr =
mtrr_add(info->fix.smem_start, pci_resource_len(dev, 0),
MTRR_TYPE_WRCOMB, 1);
#endif
/* Clear framebuffer, it's all white in memory after boot */
memset_io(info->screen_base, 0, info->fix.smem_len);
/* Allocate Cursor drawing pad.
info->fix.smem_len -= PAGE_SIZE;
addr = info->fix.smem_start + info->fix.smem_len;
write_le32(NEOREG_CURSMEMPOS, ((0x000f & (addr >> 10)) << 8) |
((0x0ff0 & (addr >> 10)) >> 4), par);
addr = (unsigned long) info->screen_base + info->fix.smem_len;
info->sprite.addr = (u8 *) addr; */
return 0;
}
static void neo_unmap_video(struct fb_info *info)
{
DBG("neo_unmap_video");
#ifdef CONFIG_MTRR
{
struct neofb_par *par = info->par;
mtrr_del(par->mtrr, info->fix.smem_start,
info->fix.smem_len);
}
#endif
iounmap(info->screen_base);
info->screen_base = NULL;
release_mem_region(info->fix.smem_start,
info->fix.smem_len);
}
static int __devinit neo_scan_monitor(struct fb_info *info)
{
struct neofb_par *par = info->par;
unsigned char type, display;
int w;
// Eventually we will have i2c support.
info->monspecs.modedb = kmalloc(sizeof(struct fb_videomode), GFP_KERNEL);
if (!info->monspecs.modedb)
return -ENOMEM;
info->monspecs.modedb_len = 1;
/* Determine the panel type */
vga_wgfx(NULL, 0x09, 0x26);
type = vga_rgfx(NULL, 0x21);
display = vga_rgfx(NULL, 0x20);
if (!par->internal_display && !par->external_display) {
par->internal_display = display & 2 || !(display & 3) ? 1 : 0;
par->external_display = display & 1;
printk (KERN_INFO "Autodetected %s display\n",
par->internal_display && par->external_display ? "simultaneous" :
par->internal_display ? "internal" : "external");
}
/* Determine panel width -- used in NeoValidMode. */
w = vga_rgfx(NULL, 0x20);
vga_wgfx(NULL, 0x09, 0x00);
switch ((w & 0x18) >> 3) {
case 0x00:
// 640x480@60
par->NeoPanelWidth = 640;
par->NeoPanelHeight = 480;
memcpy(info->monspecs.modedb, &vesa_modes[3], sizeof(struct fb_videomode));
break;
case 0x01:
par->NeoPanelWidth = 800;
if (par->libretto) {
par->NeoPanelHeight = 480;
memcpy(info->monspecs.modedb, &mode800x480, sizeof(struct fb_videomode));
} else {
// 800x600@60
par->NeoPanelHeight = 600;
memcpy(info->monspecs.modedb, &vesa_modes[8], sizeof(struct fb_videomode));
}
break;
case 0x02:
// 1024x768@60
par->NeoPanelWidth = 1024;
par->NeoPanelHeight = 768;
memcpy(info->monspecs.modedb, &vesa_modes[13], sizeof(struct fb_videomode));
break;
case 0x03:
/* 1280x1024@60 panel support needs to be added */
#ifdef NOT_DONE
par->NeoPanelWidth = 1280;
par->NeoPanelHeight = 1024;
memcpy(info->monspecs.modedb, &vesa_modes[20], sizeof(struct fb_videomode));
break;
#else
printk(KERN_ERR
"neofb: Only 640x480, 800x600/480 and 1024x768 panels are currently supported\n");
return -1;
#endif
default:
// 640x480@60
par->NeoPanelWidth = 640;
par->NeoPanelHeight = 480;
memcpy(info->monspecs.modedb, &vesa_modes[3], sizeof(struct fb_videomode));
break;
}
printk(KERN_INFO "Panel is a %dx%d %s %s display\n",
par->NeoPanelWidth,
par->NeoPanelHeight,
(type & 0x02) ? "color" : "monochrome",
(type & 0x10) ? "TFT" : "dual scan");
return 0;
}
static int __devinit neo_init_hw(struct fb_info *info)
{
struct neofb_par *par = info->par;
int videoRam = 896;
int maxClock = 65000;
int CursorMem = 1024;
int CursorOff = 0x100;
int linearSize = 1024;
int maxWidth = 1024;
int maxHeight = 1024;
DBG("neo_init_hw");
neoUnlock();
#if 0
printk(KERN_DEBUG "--- Neo extended register dump ---\n");
for (int w = 0; w < 0x85; w++)
printk(KERN_DEBUG "CR %p: %p\n", (void *) w,
(void *) vga_rcrt(NULL, w);
for (int w = 0; w < 0xC7; w++)
printk(KERN_DEBUG "GR %p: %p\n", (void *) w,
(void *) vga_rgfx(NULL, w));
#endif
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2070:
videoRam = 896;
maxClock = 65000;
CursorMem = 2048;
CursorOff = 0x100;
linearSize = 1024;
maxWidth = 1024;
maxHeight = 1024;
break;
case FB_ACCEL_NEOMAGIC_NM2090:
case FB_ACCEL_NEOMAGIC_NM2093:
videoRam = 1152;
maxClock = 80000;
CursorMem = 2048;
CursorOff = 0x100;
linearSize = 2048;
maxWidth = 1024;
maxHeight = 1024;
break;
case FB_ACCEL_NEOMAGIC_NM2097:
videoRam = 1152;
maxClock = 80000;
CursorMem = 1024;
CursorOff = 0x100;
linearSize = 2048;
maxWidth = 1024;
maxHeight = 1024;
break;
case FB_ACCEL_NEOMAGIC_NM2160:
videoRam = 2048;
maxClock = 90000;
CursorMem = 1024;
CursorOff = 0x100;
linearSize = 2048;
maxWidth = 1024;
maxHeight = 1024;
break;
case FB_ACCEL_NEOMAGIC_NM2200:
videoRam = 2560;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 4096;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
break;
case FB_ACCEL_NEOMAGIC_NM2230:
videoRam = 3008;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 4096;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
break;
case FB_ACCEL_NEOMAGIC_NM2360:
videoRam = 4096;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 4096;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
break;
case FB_ACCEL_NEOMAGIC_NM2380:
videoRam = 6144;
maxClock = 110000;
CursorMem = 1024;
CursorOff = 0x1000;
linearSize = 8192;
maxWidth = 1280;
maxHeight = 1024; /* ???? */
par->neo2200 = (Neo2200 __iomem *) par->mmio_vbase;
break;
}
/*
info->sprite.size = CursorMem;
info->sprite.scan_align = 1;
info->sprite.buf_align = 1;
info->sprite.flags = FB_PIXMAP_IO;
info->sprite.outbuf = neofb_draw_cursor;
*/
par->maxClock = maxClock;
par->cursorOff = CursorOff;
return ((videoRam * 1024));
}
static struct fb_info *__devinit neo_alloc_fb_info(struct pci_dev *dev, const struct
pci_device_id *id)
{
struct fb_info *info;
struct neofb_par *par;
info = framebuffer_alloc(sizeof(struct neofb_par), &dev->dev);
if (!info)
return NULL;
par = info->par;
info->fix.accel = id->driver_data;
par->pci_burst = !nopciburst;
par->lcd_stretch = !nostretch;
par->libretto = libretto;
par->internal_display = internal;
par->external_display = external;
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
switch (info->fix.accel) {
case FB_ACCEL_NEOMAGIC_NM2070:
sprintf(info->fix.id, "MagicGraph 128");
break;
case FB_ACCEL_NEOMAGIC_NM2090:
sprintf(info->fix.id, "MagicGraph 128V");
break;
case FB_ACCEL_NEOMAGIC_NM2093:
sprintf(info->fix.id, "MagicGraph 128ZV");
break;
case FB_ACCEL_NEOMAGIC_NM2097:
sprintf(info->fix.id, "MagicGraph 128ZV+");
break;
case FB_ACCEL_NEOMAGIC_NM2160:
sprintf(info->fix.id, "MagicGraph 128XD");
break;
case FB_ACCEL_NEOMAGIC_NM2200:
sprintf(info->fix.id, "MagicGraph 256AV");
info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
break;
case FB_ACCEL_NEOMAGIC_NM2230:
sprintf(info->fix.id, "MagicGraph 256AV+");
info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
break;
case FB_ACCEL_NEOMAGIC_NM2360:
sprintf(info->fix.id, "MagicGraph 256ZX");
info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
break;
case FB_ACCEL_NEOMAGIC_NM2380:
sprintf(info->fix.id, "MagicGraph 256XL+");
info->flags |= FBINFO_HWACCEL_IMAGEBLIT |
FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT;
break;
}
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.type_aux = 0;
info->fix.xpanstep = 0;
info->fix.ypanstep = 4;
info->fix.ywrapstep = 0;
info->fix.accel = id->driver_data;
info->fbops = &neofb_ops;
info->pseudo_palette = par->palette;
return info;
}
static void neo_free_fb_info(struct fb_info *info)
{
if (info) {
/*
* Free the colourmap
*/
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
}
}
/* --------------------------------------------------------------------- */
static int __devinit neofb_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
struct fb_info *info;
u_int h_sync, v_sync;
int video_len, err;
DBG("neofb_probe");
err = pci_enable_device(dev);
if (err)
return err;
err = -ENOMEM;
info = neo_alloc_fb_info(dev, id);
if (!info)
return err;
err = neo_map_mmio(info, dev);
if (err)
goto err_map_mmio;
err = neo_scan_monitor(info);
if (err)
goto err_scan_monitor;
video_len = neo_init_hw(info);
if (video_len < 0) {
err = video_len;
goto err_init_hw;
}
err = neo_map_video(info, dev, video_len);
if (err)
goto err_init_hw;
if (!fb_find_mode(&info->var, info, mode_option, NULL, 0,
info->monspecs.modedb, 16)) {
printk(KERN_ERR "neofb: Unable to find usable video mode.\n");
goto err_map_video;
}
/*
* Calculate the hsync and vsync frequencies. Note that
* we split the 1e12 constant up so that we can preserve
* the precision and fit the results into 32-bit registers.
* (1953125000 * 512 = 1e12)
*/
h_sync = 1953125000 / info->var.pixclock;
h_sync =
h_sync * 512 / (info->var.xres + info->var.left_margin +
info->var.right_margin + info->var.hsync_len);
v_sync =
h_sync / (info->var.yres + info->var.upper_margin +
info->var.lower_margin + info->var.vsync_len);
printk(KERN_INFO "neofb v" NEOFB_VERSION
": %dkB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
info->fix.smem_len >> 10, info->var.xres,
info->var.yres, h_sync / 1000, h_sync % 1000, v_sync);
if (fb_alloc_cmap(&info->cmap, 256, 0) < 0)
goto err_map_video;
err = register_framebuffer(info);
if (err < 0)
goto err_reg_fb;
printk(KERN_INFO "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
/*
* Our driver data
*/
pci_set_drvdata(dev, info);
return 0;
err_reg_fb:
fb_dealloc_cmap(&info->cmap);
err_map_video:
neo_unmap_video(info);
err_init_hw:
fb_destroy_modedb(info->monspecs.modedb);
err_scan_monitor:
neo_unmap_mmio(info);
err_map_mmio:
neo_free_fb_info(info);
return err;
}
static void __devexit neofb_remove(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
DBG("neofb_remove");
if (info) {
/*
* If unregister_framebuffer fails, then
* we will be leaving hooks that could cause
* oopsen laying around.
*/
if (unregister_framebuffer(info))
printk(KERN_WARNING
"neofb: danger danger! Oopsen imminent!\n");
neo_unmap_video(info);
fb_destroy_modedb(info->monspecs.modedb);
neo_unmap_mmio(info);
neo_free_fb_info(info);
/*
* Ensure that the driver data is no longer
* valid.
*/
pci_set_drvdata(dev, NULL);
}
}
static struct pci_device_id neofb_devices[] = {
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2070,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2070},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2090,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2090},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2093,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2093},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2097,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2097},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2160,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2160},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2200},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2230,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2230},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2360,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2360},
{PCI_VENDOR_ID_NEOMAGIC, PCI_CHIP_NM2380,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, FB_ACCEL_NEOMAGIC_NM2380},
{0, 0, 0, 0, 0, 0, 0}
};
MODULE_DEVICE_TABLE(pci, neofb_devices);
static struct pci_driver neofb_driver = {
.name = "neofb",
.id_table = neofb_devices,
.probe = neofb_probe,
.remove = __devexit_p(neofb_remove)
};
/* ************************* init in-kernel code ************************** */
#ifndef MODULE
static int __init neofb_setup(char *options)
{
char *this_opt;
DBG("neofb_setup");
if (!options || !*options)
return 0;
while ((this_opt = strsep(&options, ",")) != NULL) {
if (!*this_opt)
continue;
if (!strncmp(this_opt, "internal", 8))
internal = 1;
else if (!strncmp(this_opt, "external", 8))
external = 1;
else if (!strncmp(this_opt, "nostretch", 9))
nostretch = 1;
else if (!strncmp(this_opt, "nopciburst", 10))
nopciburst = 1;
else if (!strncmp(this_opt, "libretto", 8))
libretto = 1;
else
mode_option = this_opt;
}
return 0;
}
#endif /* MODULE */
static int __init neofb_init(void)
{
#ifndef MODULE
char *option = NULL;
if (fb_get_options("neofb", &option))
return -ENODEV;
neofb_setup(option);
#endif
return pci_register_driver(&neofb_driver);
}
module_init(neofb_init);
#ifdef MODULE
static void __exit neofb_exit(void)
{
pci_unregister_driver(&neofb_driver);
}
module_exit(neofb_exit);
#endif /* MODULE */
Reference in New Issue View Git Blame Copy Permalink