mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2025-01-22 05:44:31 +08:00
9a11b493ed
If we make all FEC (ethernet) addressing consistent across all ColdFire family members then we will be able to remove the duplicated plaform data and use a single setup for all. So modify the ColdFire 5272 FEC addressing so that: . FECs are numbered from 0 up . base addresses are absolute (not relative to MBAR peripheral register) . use a common name for IRQs used Signed-off-by: Greg Ungerer <gerg@uclinux.org>
148 lines
3.7 KiB
C
148 lines
3.7 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* linux/arch/m68knommu/platform/5272/config.c
|
|
*
|
|
* Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/phy_fixed.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
/*
|
|
* Some platforms need software versions of the GPIO data registers.
|
|
*/
|
|
unsigned short ppdata;
|
|
unsigned char ledbank = 0xff;
|
|
|
|
/***************************************************************************/
|
|
|
|
static struct resource m5272_fec_resources[] = {
|
|
{
|
|
.start = MCFFEC_BASE0,
|
|
.end = MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECRX0,
|
|
.end = MCF_IRQ_FECRX0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECTX0,
|
|
.end = MCF_IRQ_FECTX0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
{
|
|
.start = MCF_IRQ_FECENTC0,
|
|
.end = MCF_IRQ_FECENTC0,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct platform_device m5272_fec = {
|
|
.name = "fec",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(m5272_fec_resources),
|
|
.resource = m5272_fec_resources,
|
|
};
|
|
|
|
static struct platform_device *m5272_devices[] __initdata = {
|
|
&m5272_fec,
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m5272_uarts_init(void)
|
|
{
|
|
u32 v;
|
|
|
|
/* Enable the output lines for the serial ports */
|
|
v = readl(MCF_MBAR + MCFSIM_PBCNT);
|
|
v = (v & ~0x000000ff) | 0x00000055;
|
|
writel(v, MCF_MBAR + MCFSIM_PBCNT);
|
|
|
|
v = readl(MCF_MBAR + MCFSIM_PDCNT);
|
|
v = (v & ~0x000003fc) | 0x000002a8;
|
|
writel(v, MCF_MBAR + MCFSIM_PDCNT);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void m5272_cpu_reset(void)
|
|
{
|
|
local_irq_disable();
|
|
/* Set watchdog to reset, and enabled */
|
|
__raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
|
|
__raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
|
|
__raw_writew(0, MCF_MBAR + MCFSIM_WCR);
|
|
for (;;)
|
|
/* wait for watchdog to timeout */;
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
#if defined (CONFIG_MOD5272)
|
|
volatile unsigned char *pivrp;
|
|
|
|
/* Set base of device vectors to be 64 */
|
|
pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
|
|
*pivrp = 0x40;
|
|
#endif
|
|
|
|
#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
|
|
/* Copy command line from FLASH to local buffer... */
|
|
memcpy(commandp, (char *) 0xf0004000, size);
|
|
commandp[size-1] = 0;
|
|
#elif defined(CONFIG_CANCam)
|
|
/* Copy command line from FLASH to local buffer... */
|
|
memcpy(commandp, (char *) 0xf0010000, size);
|
|
commandp[size-1] = 0;
|
|
#endif
|
|
|
|
mach_reset = m5272_cpu_reset;
|
|
mach_sched_init = hw_timer_init;
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
/*
|
|
* Some 5272 based boards have the FEC ethernet diectly connected to
|
|
* an ethernet switch. In this case we need to use the fixed phy type,
|
|
* and we need to declare it early in boot.
|
|
*/
|
|
static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
|
|
.link = 1,
|
|
.speed = 100,
|
|
.duplex = 0,
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static int __init init_BSP(void)
|
|
{
|
|
m5272_uarts_init();
|
|
fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
|
|
platform_add_devices(m5272_devices, ARRAY_SIZE(m5272_devices));
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(init_BSP);
|
|
|
|
/***************************************************************************/
|