linux/Documentation/arm/keystone/Overview.txt
Murali Karicheri 17e846aa39 ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs
Currently kernel crash randomly when K2L EVM is booted without
clk_ignore_unused in the bootargs. This workaround is not needed
on other K2 devices such as K2HK and K2E and with this fix, we can
remove the workaround altogether. netcp driver on K2L uses linked
ram on OSR (On chip Static RAM) and requires the clock to this peripheral
enabled for proper functioning. This is the reason for the kernel crash.
So add the clock node to fix this issue.

While at it, remove the workaround documentation as well.

With the fix applied, clk_summary dump shows the clock to OSR enabled.

cat /sys/kernel/debug/clk/clk_summary
 ------cut--------------
   tcp3d-1                   0            0   399360000          0 0
   tcp3d-0                   0            0   399360000          0 0
   osr                       1            1   399360000          0 0
   fftc-0                    0            0   399360000          0 0
 -----cut----------------
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <ssantosh@kernel.org>
2015-11-23 10:36:27 -08:00

56 lines
1.7 KiB
Plaintext

TI Keystone Linux Overview
--------------------------
Introduction
------------
Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors
and c66x DSP cores. This document describes essential information required
for users to run Linux on Keystone based EVMs from Texas Instruments.
Following SoCs & EVMs are currently supported:-
------------ K2HK SoC and EVM --------------------------------------------------
a.k.a Keystone 2 Hawking/Kepler SoC
TCI6636K2H & TCI6636K2K: See documentation at
http://www.ti.com/product/tci6638k2k
http://www.ti.com/product/tci6638k2h
EVM:
http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
------------ K2E SoC and EVM ---------------------------------------------------
a.k.a Keystone 2 Edison SoC
K2E - 66AK2E05: See documentation at
http://www.ti.com/product/66AK2E05/technicaldocuments
EVM:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
------------ K2L SoC and EVM ---------------------------------------------------
a.k.a Keystone 2 Lamarr SoC
K2L - TCI6630K2L: See documentation at
http://www.ti.com/product/TCI6630K2L/technicaldocuments
EVM:
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
Configuration
-------------
All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same
image is used to boot on individual EVMs. The platform configuration is
specified through DTS. Following are the DTS used:-
K2HK EVM : k2hk-evm.dts
K2E EVM : k2e-evm.dts
K2L EVM : k2l-evm.dts
The device tree documentation for the keystone machines are located at
Documentation/devicetree/bindings/arm/keystone/keystone.txt
Document Author
---------------
Murali Karicheri <m-karicheri2@ti.com>
Copyright 2015 Texas Instruments