mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-15 00:04:15 +08:00
f9a8ee8c8b
Since commit 5e5da1e9fb
("pwm: ab8500: Explicitly allocate pwm chip
base dynamically") all drivers use dynamic ID allocation explicitly. New
drivers are supposed to do the same, so remove support for driver
specified base IDs and drop all assignments in the low-level drivers.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
313 lines
7.3 KiB
C
313 lines
7.3 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* TI/National Semiconductor LP3943 PWM driver
|
|
*
|
|
* Copyright 2013 Texas Instruments
|
|
*
|
|
* Author: Milo Kim <milo.kim@ti.com>
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mfd/lp3943.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define LP3943_MAX_DUTY 255
|
|
#define LP3943_MIN_PERIOD 6250
|
|
#define LP3943_MAX_PERIOD 1600000
|
|
|
|
struct lp3943_pwm {
|
|
struct pwm_chip chip;
|
|
struct lp3943 *lp3943;
|
|
struct lp3943_platform_data *pdata;
|
|
};
|
|
|
|
static inline struct lp3943_pwm *to_lp3943_pwm(struct pwm_chip *_chip)
|
|
{
|
|
return container_of(_chip, struct lp3943_pwm, chip);
|
|
}
|
|
|
|
static struct lp3943_pwm_map *
|
|
lp3943_pwm_request_map(struct lp3943_pwm *lp3943_pwm, int hwpwm)
|
|
{
|
|
struct lp3943_platform_data *pdata = lp3943_pwm->pdata;
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
struct lp3943_pwm_map *pwm_map;
|
|
int i, offset;
|
|
|
|
pwm_map = kzalloc(sizeof(*pwm_map), GFP_KERNEL);
|
|
if (!pwm_map)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pwm_map->output = pdata->pwms[hwpwm]->output;
|
|
pwm_map->num_outputs = pdata->pwms[hwpwm]->num_outputs;
|
|
|
|
for (i = 0; i < pwm_map->num_outputs; i++) {
|
|
offset = pwm_map->output[i];
|
|
|
|
/* Return an error if the pin is already assigned */
|
|
if (test_and_set_bit(offset, &lp3943->pin_used)) {
|
|
kfree(pwm_map);
|
|
return ERR_PTR(-EBUSY);
|
|
}
|
|
}
|
|
|
|
return pwm_map;
|
|
}
|
|
|
|
static int lp3943_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map;
|
|
|
|
pwm_map = lp3943_pwm_request_map(lp3943_pwm, pwm->hwpwm);
|
|
if (IS_ERR(pwm_map))
|
|
return PTR_ERR(pwm_map);
|
|
|
|
return pwm_set_chip_data(pwm, pwm_map);
|
|
}
|
|
|
|
static void lp3943_pwm_free_map(struct lp3943_pwm *lp3943_pwm,
|
|
struct lp3943_pwm_map *pwm_map)
|
|
{
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
int i, offset;
|
|
|
|
for (i = 0; i < pwm_map->num_outputs; i++) {
|
|
offset = pwm_map->output[i];
|
|
clear_bit(offset, &lp3943->pin_used);
|
|
}
|
|
|
|
kfree(pwm_map);
|
|
}
|
|
|
|
static void lp3943_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
|
|
|
|
lp3943_pwm_free_map(lp3943_pwm, pwm_map);
|
|
}
|
|
|
|
static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
int duty_ns, int period_ns)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
u8 val, reg_duty, reg_prescale;
|
|
int err;
|
|
|
|
/*
|
|
* How to configure the LP3943 PWMs
|
|
*
|
|
* 1) Period = 6250 ~ 1600000
|
|
* 2) Prescale = period / 6250 -1
|
|
* 3) Duty = input duty
|
|
*
|
|
* Prescale and duty are register values
|
|
*/
|
|
|
|
if (pwm->hwpwm == 0) {
|
|
reg_prescale = LP3943_REG_PRESCALE0;
|
|
reg_duty = LP3943_REG_PWM0;
|
|
} else {
|
|
reg_prescale = LP3943_REG_PRESCALE1;
|
|
reg_duty = LP3943_REG_PWM1;
|
|
}
|
|
|
|
period_ns = clamp(period_ns, LP3943_MIN_PERIOD, LP3943_MAX_PERIOD);
|
|
val = (u8)(period_ns / LP3943_MIN_PERIOD - 1);
|
|
|
|
err = lp3943_write_byte(lp3943, reg_prescale, val);
|
|
if (err)
|
|
return err;
|
|
|
|
val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns);
|
|
|
|
return lp3943_write_byte(lp3943, reg_duty, val);
|
|
}
|
|
|
|
static int lp3943_pwm_set_mode(struct lp3943_pwm *lp3943_pwm,
|
|
struct lp3943_pwm_map *pwm_map,
|
|
u8 val)
|
|
{
|
|
struct lp3943 *lp3943 = lp3943_pwm->lp3943;
|
|
const struct lp3943_reg_cfg *mux = lp3943->mux_cfg;
|
|
int i, index, err;
|
|
|
|
for (i = 0; i < pwm_map->num_outputs; i++) {
|
|
index = pwm_map->output[i];
|
|
err = lp3943_update_bits(lp3943, mux[index].reg,
|
|
mux[index].mask,
|
|
val << mux[index].shift);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lp3943_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
|
|
u8 val;
|
|
|
|
if (pwm->hwpwm == 0)
|
|
val = LP3943_DIM_PWM0;
|
|
else
|
|
val = LP3943_DIM_PWM1;
|
|
|
|
/*
|
|
* Each PWM generator is set to control any of outputs of LP3943.
|
|
* To enable/disable the PWM, these output pins should be configured.
|
|
*/
|
|
|
|
return lp3943_pwm_set_mode(lp3943_pwm, pwm_map, val);
|
|
}
|
|
|
|
static void lp3943_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = to_lp3943_pwm(chip);
|
|
struct lp3943_pwm_map *pwm_map = pwm_get_chip_data(pwm);
|
|
|
|
/*
|
|
* LP3943 outputs are open-drain, so the pin should be configured
|
|
* when the PWM is disabled.
|
|
*/
|
|
|
|
lp3943_pwm_set_mode(lp3943_pwm, pwm_map, LP3943_GPIO_OUT_HIGH);
|
|
}
|
|
|
|
static const struct pwm_ops lp3943_pwm_ops = {
|
|
.request = lp3943_pwm_request,
|
|
.free = lp3943_pwm_free,
|
|
.config = lp3943_pwm_config,
|
|
.enable = lp3943_pwm_enable,
|
|
.disable = lp3943_pwm_disable,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int lp3943_pwm_parse_dt(struct device *dev,
|
|
struct lp3943_pwm *lp3943_pwm)
|
|
{
|
|
static const char * const name[] = { "ti,pwm0", "ti,pwm1", };
|
|
struct device_node *node = dev->of_node;
|
|
struct lp3943_platform_data *pdata;
|
|
struct lp3943_pwm_map *pwm_map;
|
|
enum lp3943_pwm_output *output;
|
|
int i, err, proplen, count = 0;
|
|
u32 num_outputs;
|
|
|
|
if (!node)
|
|
return -EINVAL;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* Read the output map configuration from the device tree.
|
|
* Each of the two PWM generators can drive zero or more outputs.
|
|
*/
|
|
|
|
for (i = 0; i < LP3943_NUM_PWMS; i++) {
|
|
if (!of_get_property(node, name[i], &proplen))
|
|
continue;
|
|
|
|
num_outputs = proplen / sizeof(u32);
|
|
if (num_outputs == 0)
|
|
continue;
|
|
|
|
output = devm_kcalloc(dev, num_outputs, sizeof(*output),
|
|
GFP_KERNEL);
|
|
if (!output)
|
|
return -ENOMEM;
|
|
|
|
err = of_property_read_u32_array(node, name[i], output,
|
|
num_outputs);
|
|
if (err)
|
|
return err;
|
|
|
|
pwm_map = devm_kzalloc(dev, sizeof(*pwm_map), GFP_KERNEL);
|
|
if (!pwm_map)
|
|
return -ENOMEM;
|
|
|
|
pwm_map->output = output;
|
|
pwm_map->num_outputs = num_outputs;
|
|
pdata->pwms[i] = pwm_map;
|
|
|
|
count++;
|
|
}
|
|
|
|
if (count == 0)
|
|
return -ENODATA;
|
|
|
|
lp3943_pwm->pdata = pdata;
|
|
return 0;
|
|
}
|
|
|
|
static int lp3943_pwm_probe(struct platform_device *pdev)
|
|
{
|
|
struct lp3943 *lp3943 = dev_get_drvdata(pdev->dev.parent);
|
|
struct lp3943_pwm *lp3943_pwm;
|
|
int ret;
|
|
|
|
lp3943_pwm = devm_kzalloc(&pdev->dev, sizeof(*lp3943_pwm), GFP_KERNEL);
|
|
if (!lp3943_pwm)
|
|
return -ENOMEM;
|
|
|
|
lp3943_pwm->pdata = lp3943->pdata;
|
|
if (!lp3943_pwm->pdata) {
|
|
if (IS_ENABLED(CONFIG_OF))
|
|
ret = lp3943_pwm_parse_dt(&pdev->dev, lp3943_pwm);
|
|
else
|
|
ret = -ENODEV;
|
|
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
lp3943_pwm->lp3943 = lp3943;
|
|
lp3943_pwm->chip.dev = &pdev->dev;
|
|
lp3943_pwm->chip.ops = &lp3943_pwm_ops;
|
|
lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
|
|
|
|
platform_set_drvdata(pdev, lp3943_pwm);
|
|
|
|
return pwmchip_add(&lp3943_pwm->chip);
|
|
}
|
|
|
|
static int lp3943_pwm_remove(struct platform_device *pdev)
|
|
{
|
|
struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev);
|
|
|
|
return pwmchip_remove(&lp3943_pwm->chip);
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id lp3943_pwm_of_match[] = {
|
|
{ .compatible = "ti,lp3943-pwm", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match);
|
|
#endif
|
|
|
|
static struct platform_driver lp3943_pwm_driver = {
|
|
.probe = lp3943_pwm_probe,
|
|
.remove = lp3943_pwm_remove,
|
|
.driver = {
|
|
.name = "lp3943-pwm",
|
|
.of_match_table = of_match_ptr(lp3943_pwm_of_match),
|
|
},
|
|
};
|
|
module_platform_driver(lp3943_pwm_driver);
|
|
|
|
MODULE_DESCRIPTION("LP3943 PWM driver");
|
|
MODULE_ALIAS("platform:lp3943-pwm");
|
|
MODULE_AUTHOR("Milo Kim");
|
|
MODULE_LICENSE("GPL");
|