mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-23 19:14:30 +08:00
6771fb0b94
There are a couple of large cleanup sets in here alongside a number of new drivers. Note an immutable branch merged to add a stub for i2c_verify_client() as needed to avoid a build issue in the fxls8962af driver as a result of a workaround for a device errata that only applies when i2c interface is used. Counters ======== New device support * intel,quadrature encoder peripheral found on Elkhart Lake platforms. - New driver. IIO === New device support * amstaos,tsl2591 ambient light sensor. - New driver + bindings - Follow up fix to ensure some local variables are suitable for error handling. * fsl,fxls8962af + fsl,fxls8964af accelerometers - New driver + bindings - Includes an errata work around that cause a build bot failure fixed by adding a stub to i2c. * kionix,kxcjk-1013 - Add support for KX023-1025 device. Mostly a different register map that needed to be supported. * murata,sca3300 accelerometer - New driver + bindings * st,lsm9ds0 IMU - Rework of st,sensors driver to cleanly support this new glue driver that enables the two parts of the LSM9DS0. * ti,tsc2046 touchscreen controller ADC. - New driver. Intent here is to use this with existing IIO consumer drivers such as resistive-adc-touch. - Follow up fix to avoid an issue with unsigned subtraction in error check. * ti,tmp117 digital temperature sensor - New driver + bindings Features * adi,ad5755 - Add missing dt-binding doc * adi,ad7298 - Add ACPI ID used on Intel Galileo Gen 1 boards. - Add missing dt-binding doc * adi,ad7476 - Add missing dt-binding doc * adi,ad7746 - Add missing dt-binding doc for this driver that will hopefully move out of staging shortly. Update staging driver to use the binding instead of platform data. * adi,adis16201 + adis16209 - Add missing dt-binding doc * adi,adis16480 - Support burst mode for adis16495 and adis16497 parts. * bosch,bma220 - Add missing dt-binding doc * fsl,mma7455 - Add missing dt-binding doc * iio-rescale - Support handling of processed channels from provider. Some ADCs require (typically non linear) calibration functions to be applied, and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be used as providers to the iio-rescale driver which needs to handle them somewhat differently from IIO_CHAN_INFO_RAW * sensiron,sps30 - Support the serial interface. Note this required significant refactoring of existing driver. * st,st-sensors - Add mount matrix support for normal dt-binding whilst continuing to support the odd ACPI approach for accelerometers. * ti,dac082s085 + similar - Add missing dt-binding doc * trivial-devices - add entries for - memsic,mx4005, memsic,mx6255 and memsic,mxc6655 - sensortek,stk8312 and sensortek,stk8ba50 Cleanup / minor fixes * core - Use devm_add_action_or_reset() to replace boilerplate in several driver and core IIO devm_* functions. - Fix an error path issue introduced by above, that could return an error pointer rather than the expected null from dev_iio_device_alloc() - Move more IIO internals related fields from struct iio_dev to struct iio_dev_opaque. - Drop unused final update of in_loc in demux setup. * Docs - Move some docs from driver specific to core dos to avoid replication of names which the documentation builder does not allow. Note this means adding a few device specific notes to the general docs to cover the more unusual uses of the ABI. - ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we have the bufferX/* variant. Not we are not getting rid of these interfaces, just encouraging new code to use the new interface. * IIO wide: - Tidy up new cases of dev.parent etc being set in drivers as the core now does it. - Fix more cases of possible miss-aligned buffers when passed to iio_push_to_buffers_with_timestamp(). Note we only have one known instance of anyone seeing this bug actually happening, so this has been a low priority cleanup effort for several cycles. - sysfs_emit() used in more drivers. - Runtime pm tidy up and use of pm_runtime_resume_and_get() - Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires that the timestamp when inserted by naturally aligned + consumers can assume that all fields are naturally aligned. Part of a long running effort, with at least 2 more series to come tackling additional variants. - Stop specifying "mount-matrix" property name in every lookup of the mount matrix from firmware by hard coding it in the core. * adi,ad7476 - Handle the variety of different regulators used by the parts supported by this driver (came up in dt-binding review) * adi,ad7746 - Trivial drop of if (ret) return ret; return 0; pattern - Tidy up comments - Pull capdac setup out to own function. * adi,ad7766 - Trivial drop of if (ret) return ret; return 0; pattern * adi,adis - Avoid returning error codes in interrupt handlers. - Handle a failure in spi_write in the trigger handler. - Rework to add updating of device page after changing it. - Don't push data to IIO buffers when read failed. - Add configuration of burst max speed to core avoid handling this in each driver. - Use the adis_dev_lock() helper in adis16260 and adis16136 drivers. - Excessive includes cleanup via include-what-you-use static checker after zero day highlighted that these needed updating. * afe - Amend binding to add #io-channel-cells, thus allowing this IIO consumer to also be an IIO provider. * aosong,am2315 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * bosch,bma180 - Adding missing bandwidth settings (500, 1000 Hz) * bosch,bme680 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * ep93xx_adc, - Drop a redundant error print. * maxim,max118 - Convert remainder of probe() to devm_ managed functions. - Avoid some repeated jumping back and forth between iio_dev and spi structures. * maxim,max11100 - Use get_unaligned_be16() instead of open coding. - Convert remainder of probe() to devm_ managed functions. * samsung,exynos_adc - Unused error value dropped. * sensiron,sgp30 - Drop use of %hx in favor of %x and letting the normal type conversion work. * sensortek,stk8312 - Add lowercase device id and note uppercase version deprecated. - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * sprx,sc72xx_adc - add MODULE_DEVICE_TABLE * st,lsm6dsx - Fix docs of valid ODRs * st,sensors - dt-binding rework. Two efforts on this crossed in a previous cycle so this update cherry picks the best of the two yaml conversions. - Don't copy the channel spec array as now ext_info is no longer modified. * st,stm32-adc - tidy up some docs that were marked as kernel-doc but aren't. * ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626 - Convert remainder of probe() functions to devm_ managed functions to simplify error handing and remove paths. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmC/mCoRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FoidAQ//SqpbBeEy8HATSHccooHwHI3eK+hnj0n9 9zr6/7o52EQ0lFN6V7OLp0XNL3DNIV8oYAyvzYZ4Qh2NXLYQHDnqiiUyLxCfctqu Ii+9NmVmuk/PlPRRubQRZE+Czdtwgsp7dRQOYJiuxUeKVD/EUVjl1FmpsiPtGeaa iU6JaYtdF3ie0b1zQCwQTYYsM8lZ2/ovKW8F29K5ALnrDd9h6Ad0p5QDvyDxyajp VyLRJa7nwAfK5rP6efuNsDfzbMycTPtHkcC+Pgec/2RrXL5mDz4EXHI1nOUZAGdb UaN/uDpytAxJZk6Fs2f+RdgevlQgpBxAXGDHE2YHkcZi7X0ppWOjeIZFSDbDiaHO XlSQgOelUqKtHhRZ3MYHxbSOgO3Vif6ecCDMNCN78E0YE3kQHHSwY0JMGgUeHIGG hQPKGaD1AKzh7AsbPbazYW6VX4dDDWcr8pQ8D9wWLUKikcZLKqRH5uAwvjZ+NjuC Bfnjx/QhmIhbs0gFaw4Q5mvYQ3Zmfh7nzcW98jwcbR6pOqKvIeqzw9OARRHaimrd /GRCiccxKtU8J7f5l+MSzYQt4hT0Ef1vuq9Ak5SDCr3Fwnix5ipFVLkipWvgJ7JD OqubcwwW5EfgZPY/X7nsK/U6v8SlqF4XrvCVky4MUt0x1YXxc/tjYak8oLEqpMVC gQP3KUZIYeA= =Zved -----END PGP SIGNATURE----- Merge tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 1st set of new IIO/counter device support, features and cleanup for 5.14 There are a couple of large cleanup sets in here alongside a number of new drivers. Note an immutable branch merged to add a stub for i2c_verify_client() as needed to avoid a build issue in the fxls8962af driver as a result of a workaround for a device errata that only applies when i2c interface is used. Counters ======== New device support * intel,quadrature encoder peripheral found on Elkhart Lake platforms. - New driver. IIO === New device support * amstaos,tsl2591 ambient light sensor. - New driver + bindings - Follow up fix to ensure some local variables are suitable for error handling. * fsl,fxls8962af + fsl,fxls8964af accelerometers - New driver + bindings - Includes an errata work around that cause a build bot failure fixed by adding a stub to i2c. * kionix,kxcjk-1013 - Add support for KX023-1025 device. Mostly a different register map that needed to be supported. * murata,sca3300 accelerometer - New driver + bindings * st,lsm9ds0 IMU - Rework of st,sensors driver to cleanly support this new glue driver that enables the two parts of the LSM9DS0. * ti,tsc2046 touchscreen controller ADC. - New driver. Intent here is to use this with existing IIO consumer drivers such as resistive-adc-touch. - Follow up fix to avoid an issue with unsigned subtraction in error check. * ti,tmp117 digital temperature sensor - New driver + bindings Features * adi,ad5755 - Add missing dt-binding doc * adi,ad7298 - Add ACPI ID used on Intel Galileo Gen 1 boards. - Add missing dt-binding doc * adi,ad7476 - Add missing dt-binding doc * adi,ad7746 - Add missing dt-binding doc for this driver that will hopefully move out of staging shortly. Update staging driver to use the binding instead of platform data. * adi,adis16201 + adis16209 - Add missing dt-binding doc * adi,adis16480 - Support burst mode for adis16495 and adis16497 parts. * bosch,bma220 - Add missing dt-binding doc * fsl,mma7455 - Add missing dt-binding doc * iio-rescale - Support handling of processed channels from provider. Some ADCs require (typically non linear) calibration functions to be applied, and so provide only IIO_CHAN_INFO_PROCESSED read back. They can be used as providers to the iio-rescale driver which needs to handle them somewhat differently from IIO_CHAN_INFO_RAW * sensiron,sps30 - Support the serial interface. Note this required significant refactoring of existing driver. * st,st-sensors - Add mount matrix support for normal dt-binding whilst continuing to support the odd ACPI approach for accelerometers. * ti,dac082s085 + similar - Add missing dt-binding doc * trivial-devices - add entries for - memsic,mx4005, memsic,mx6255 and memsic,mxc6655 - sensortek,stk8312 and sensortek,stk8ba50 Cleanup / minor fixes * core - Use devm_add_action_or_reset() to replace boilerplate in several driver and core IIO devm_* functions. - Fix an error path issue introduced by above, that could return an error pointer rather than the expected null from dev_iio_device_alloc() - Move more IIO internals related fields from struct iio_dev to struct iio_dev_opaque. - Drop unused final update of in_loc in demux setup. * Docs - Move some docs from driver specific to core dos to avoid replication of names which the documentation builder does not allow. Note this means adding a few device specific notes to the general docs to cover the more unusual uses of the ABI. - ABI: Move old buffer/* and scan_elements/* docs to obsolete as now we have the bufferX/* variant. Not we are not getting rid of these interfaces, just encouraging new code to use the new interface. * IIO wide: - Tidy up new cases of dev.parent etc being set in drivers as the core now does it. - Fix more cases of possible miss-aligned buffers when passed to iio_push_to_buffers_with_timestamp(). Note we only have one known instance of anyone seeing this bug actually happening, so this has been a low priority cleanup effort for several cycles. - sysfs_emit() used in more drivers. - Runtime pm tidy up and use of pm_runtime_resume_and_get() - Buffer alignment fixes as iio_push_to_buffers_with_timestamp requires that the timestamp when inserted by naturally aligned + consumers can assume that all fields are naturally aligned. Part of a long running effort, with at least 2 more series to come tackling additional variants. - Stop specifying "mount-matrix" property name in every lookup of the mount matrix from firmware by hard coding it in the core. * adi,ad7476 - Handle the variety of different regulators used by the parts supported by this driver (came up in dt-binding review) * adi,ad7746 - Trivial drop of if (ret) return ret; return 0; pattern - Tidy up comments - Pull capdac setup out to own function. * adi,ad7766 - Trivial drop of if (ret) return ret; return 0; pattern * adi,adis - Avoid returning error codes in interrupt handlers. - Handle a failure in spi_write in the trigger handler. - Rework to add updating of device page after changing it. - Don't push data to IIO buffers when read failed. - Add configuration of burst max speed to core avoid handling this in each driver. - Use the adis_dev_lock() helper in adis16260 and adis16136 drivers. - Excessive includes cleanup via include-what-you-use static checker after zero day highlighted that these needed updating. * afe - Amend binding to add #io-channel-cells, thus allowing this IIO consumer to also be an IIO provider. * aosong,am2315 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * bosch,bma180 - Adding missing bandwidth settings (500, 1000 Hz) * bosch,bme680 - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * ep93xx_adc, - Drop a redundant error print. * maxim,max118 - Convert remainder of probe() to devm_ managed functions. - Avoid some repeated jumping back and forth between iio_dev and spi structures. * maxim,max11100 - Use get_unaligned_be16() instead of open coding. - Convert remainder of probe() to devm_ managed functions. * samsung,exynos_adc - Unused error value dropped. * sensiron,sgp30 - Drop use of %hx in favor of %x and letting the normal type conversion work. * sensortek,stk8312 - Add lowercase device id and note uppercase version deprecated. - Drop ACPI id. Unlikely this one is in the wild and it isn't valid ACPI naming. * sprx,sc72xx_adc - add MODULE_DEVICE_TABLE * st,lsm6dsx - Fix docs of valid ODRs * st,sensors - dt-binding rework. Two efforts on this crossed in a previous cycle so this update cherry picks the best of the two yaml conversions. - Don't copy the channel spec array as now ext_info is no longer modified. * st,stm32-adc - tidy up some docs that were marked as kernel-doc but aren't. * ti,adc081c, ti,adc0832, ti,adc108s102 and ti,adc161s626 - Convert remainder of probe() functions to devm_ managed functions to simplify error handing and remove paths. * tag 'iio-for-5.14a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (171 commits) i2c: core: Add stub for i2c_verify_client() if !CONFIG_I2C iio: adis: Cleanout unused headers iio: accel: bma180: Add missing 500 Hz / 1000 Hz bandwidth counter: Add support for Intel Quadrature Encoder Peripheral staging: iio: cdc: ad7746: extract capac setup to own function staging: iio: cdc: ad7746: clean up probe return staging: iio: cdc: ad7746: remove ordinary comments iio: adc: ti-adc161s626: Use devm managed functions for all of probe. iio: adc: ti-adc108s102: Use devm managed functions for all of probe() iio: adc: ti-adc0832: Use devm managed functions for all of probe() iio: adc: ti-adc081c: Use devm managed functions for all of probe() iio: adc: max1118: Avoid jumping back and forth between spi and iio structures iio: adc: max1118: Use devm_ managed functions for all of probe iio: adc: max11100: Use devm_ functions for rest of probe() iio: adc: max11100: Use get_unaligned_be16() rather than opencoding. iio: chemical: sgp30: Drop use of %hx in format string. iio: gyro: st_gyro: Support mount matrix iio: magnetometer: st_magn: Support mount matrix iio: accel: st_sensors: Stop copying channels iio: accel: st_sensors: Support generic mounting matrix ...
1062 lines
26 KiB
C
1062 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Driver for NXP FXAS21002C Gyroscope - Core
|
|
*
|
|
* Copyright (C) 2019 Linaro Ltd.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/iio/events.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
#include "fxas21002c.h"
|
|
|
|
#define FXAS21002C_CHIP_ID_1 0xD6
|
|
#define FXAS21002C_CHIP_ID_2 0xD7
|
|
|
|
enum fxas21002c_mode_state {
|
|
FXAS21002C_MODE_STANDBY,
|
|
FXAS21002C_MODE_READY,
|
|
FXAS21002C_MODE_ACTIVE,
|
|
};
|
|
|
|
#define FXAS21002C_STANDBY_ACTIVE_TIME_MS 62
|
|
#define FXAS21002C_READY_ACTIVE_TIME_MS 7
|
|
|
|
#define FXAS21002C_ODR_LIST_MAX 10
|
|
|
|
#define FXAS21002C_SCALE_FRACTIONAL 32
|
|
#define FXAS21002C_RANGE_LIMIT_DOUBLE 2000
|
|
|
|
#define FXAS21002C_AXIS_TO_REG(axis) (FXAS21002C_REG_OUT_X_MSB + ((axis) * 2))
|
|
|
|
static const struct reg_field fxas21002c_reg_fields[] = {
|
|
[F_DR_STATUS] = REG_FIELD(FXAS21002C_REG_STATUS, 0, 7),
|
|
[F_OUT_X_MSB] = REG_FIELD(FXAS21002C_REG_OUT_X_MSB, 0, 7),
|
|
[F_OUT_X_LSB] = REG_FIELD(FXAS21002C_REG_OUT_X_LSB, 0, 7),
|
|
[F_OUT_Y_MSB] = REG_FIELD(FXAS21002C_REG_OUT_Y_MSB, 0, 7),
|
|
[F_OUT_Y_LSB] = REG_FIELD(FXAS21002C_REG_OUT_Y_LSB, 0, 7),
|
|
[F_OUT_Z_MSB] = REG_FIELD(FXAS21002C_REG_OUT_Z_MSB, 0, 7),
|
|
[F_OUT_Z_LSB] = REG_FIELD(FXAS21002C_REG_OUT_Z_LSB, 0, 7),
|
|
[F_ZYX_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 7, 7),
|
|
[F_Z_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 6, 6),
|
|
[F_Y_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 5, 5),
|
|
[F_X_OW] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 4, 4),
|
|
[F_ZYX_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 3, 3),
|
|
[F_Z_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 2, 2),
|
|
[F_Y_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 1, 1),
|
|
[F_X_DR] = REG_FIELD(FXAS21002C_REG_DR_STATUS, 0, 0),
|
|
[F_OVF] = REG_FIELD(FXAS21002C_REG_F_STATUS, 7, 7),
|
|
[F_WMKF] = REG_FIELD(FXAS21002C_REG_F_STATUS, 6, 6),
|
|
[F_CNT] = REG_FIELD(FXAS21002C_REG_F_STATUS, 0, 5),
|
|
[F_MODE] = REG_FIELD(FXAS21002C_REG_F_SETUP, 6, 7),
|
|
[F_WMRK] = REG_FIELD(FXAS21002C_REG_F_SETUP, 0, 5),
|
|
[F_EVENT] = REG_FIELD(FXAS21002C_REG_F_EVENT, 5, 5),
|
|
[FE_TIME] = REG_FIELD(FXAS21002C_REG_F_EVENT, 0, 4),
|
|
[F_BOOTEND] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 3, 3),
|
|
[F_SRC_FIFO] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 2, 2),
|
|
[F_SRC_RT] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 1, 1),
|
|
[F_SRC_DRDY] = REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 0, 0),
|
|
[F_WHO_AM_I] = REG_FIELD(FXAS21002C_REG_WHO_AM_I, 0, 7),
|
|
[F_BW] = REG_FIELD(FXAS21002C_REG_CTRL0, 6, 7),
|
|
[F_SPIW] = REG_FIELD(FXAS21002C_REG_CTRL0, 5, 5),
|
|
[F_SEL] = REG_FIELD(FXAS21002C_REG_CTRL0, 3, 4),
|
|
[F_HPF_EN] = REG_FIELD(FXAS21002C_REG_CTRL0, 2, 2),
|
|
[F_FS] = REG_FIELD(FXAS21002C_REG_CTRL0, 0, 1),
|
|
[F_ELE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 3, 3),
|
|
[F_ZTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 2, 2),
|
|
[F_YTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 1, 1),
|
|
[F_XTEFE] = REG_FIELD(FXAS21002C_REG_RT_CFG, 0, 0),
|
|
[F_EA] = REG_FIELD(FXAS21002C_REG_RT_SRC, 6, 6),
|
|
[F_ZRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 5, 5),
|
|
[F_ZRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 4, 4),
|
|
[F_YRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 3, 3),
|
|
[F_YRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 2, 2),
|
|
[F_XRT] = REG_FIELD(FXAS21002C_REG_RT_SRC, 1, 1),
|
|
[F_XRT_POL] = REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 0),
|
|
[F_DBCNTM] = REG_FIELD(FXAS21002C_REG_RT_THS, 7, 7),
|
|
[F_THS] = REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 6),
|
|
[F_RT_COUNT] = REG_FIELD(FXAS21002C_REG_RT_COUNT, 0, 7),
|
|
[F_TEMP] = REG_FIELD(FXAS21002C_REG_TEMP, 0, 7),
|
|
[F_RST] = REG_FIELD(FXAS21002C_REG_CTRL1, 6, 6),
|
|
[F_ST] = REG_FIELD(FXAS21002C_REG_CTRL1, 5, 5),
|
|
[F_DR] = REG_FIELD(FXAS21002C_REG_CTRL1, 2, 4),
|
|
[F_ACTIVE] = REG_FIELD(FXAS21002C_REG_CTRL1, 1, 1),
|
|
[F_READY] = REG_FIELD(FXAS21002C_REG_CTRL1, 0, 0),
|
|
[F_INT_CFG_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, 7, 7),
|
|
[F_INT_EN_FIFO] = REG_FIELD(FXAS21002C_REG_CTRL2, 6, 6),
|
|
[F_INT_CFG_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, 5, 5),
|
|
[F_INT_EN_RT] = REG_FIELD(FXAS21002C_REG_CTRL2, 4, 4),
|
|
[F_INT_CFG_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, 3, 3),
|
|
[F_INT_EN_DRDY] = REG_FIELD(FXAS21002C_REG_CTRL2, 2, 2),
|
|
[F_IPOL] = REG_FIELD(FXAS21002C_REG_CTRL2, 1, 1),
|
|
[F_PP_OD] = REG_FIELD(FXAS21002C_REG_CTRL2, 0, 0),
|
|
[F_WRAPTOONE] = REG_FIELD(FXAS21002C_REG_CTRL3, 3, 3),
|
|
[F_EXTCTRLEN] = REG_FIELD(FXAS21002C_REG_CTRL3, 2, 2),
|
|
[F_FS_DOUBLE] = REG_FIELD(FXAS21002C_REG_CTRL3, 0, 0),
|
|
};
|
|
|
|
static const int fxas21002c_odr_values[] = {
|
|
800, 400, 200, 100, 50, 25, 12, 12
|
|
};
|
|
|
|
/*
|
|
* These values are taken from the low-pass filter cutoff frequency calculated
|
|
* ODR * 0.lpf_values. So, for ODR = 800Hz with a lpf value = 0.32
|
|
* => LPF cutoff frequency = 800 * 0.32 = 256 Hz
|
|
*/
|
|
static const int fxas21002c_lpf_values[] = {
|
|
32, 16, 8
|
|
};
|
|
|
|
/*
|
|
* These values are taken from the high-pass filter cutoff frequency calculated
|
|
* ODR * 0.0hpf_values. So, for ODR = 800Hz with a hpf value = 0.018750
|
|
* => HPF cutoff frequency = 800 * 0.018750 = 15 Hz
|
|
*/
|
|
static const int fxas21002c_hpf_values[] = {
|
|
18750, 9625, 4875, 2475
|
|
};
|
|
|
|
static const int fxas21002c_range_values[] = {
|
|
4000, 2000, 1000, 500, 250
|
|
};
|
|
|
|
struct fxas21002c_data {
|
|
u8 chip_id;
|
|
enum fxas21002c_mode_state mode;
|
|
enum fxas21002c_mode_state prev_mode;
|
|
|
|
struct mutex lock; /* serialize data access */
|
|
struct regmap *regmap;
|
|
struct regmap_field *regmap_fields[F_MAX_FIELDS];
|
|
struct iio_trigger *dready_trig;
|
|
s64 timestamp;
|
|
int irq;
|
|
|
|
struct regulator *vdd;
|
|
struct regulator *vddio;
|
|
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
s16 buffer[8] ____cacheline_aligned;
|
|
};
|
|
|
|
enum fxas21002c_channel_index {
|
|
CHANNEL_SCAN_INDEX_X,
|
|
CHANNEL_SCAN_INDEX_Y,
|
|
CHANNEL_SCAN_INDEX_Z,
|
|
CHANNEL_SCAN_MAX,
|
|
};
|
|
|
|
static int fxas21002c_odr_hz_from_value(struct fxas21002c_data *data, u8 value)
|
|
{
|
|
int odr_value_max = ARRAY_SIZE(fxas21002c_odr_values) - 1;
|
|
|
|
value = min_t(u8, value, odr_value_max);
|
|
|
|
return fxas21002c_odr_values[value];
|
|
}
|
|
|
|
static int fxas21002c_odr_value_from_hz(struct fxas21002c_data *data,
|
|
unsigned int hz)
|
|
{
|
|
int odr_table_size = ARRAY_SIZE(fxas21002c_odr_values);
|
|
int i;
|
|
|
|
for (i = 0; i < odr_table_size; i++)
|
|
if (fxas21002c_odr_values[i] == hz)
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int fxas21002c_lpf_bw_from_value(struct fxas21002c_data *data, u8 value)
|
|
{
|
|
int lpf_value_max = ARRAY_SIZE(fxas21002c_lpf_values) - 1;
|
|
|
|
value = min_t(u8, value, lpf_value_max);
|
|
|
|
return fxas21002c_lpf_values[value];
|
|
}
|
|
|
|
static int fxas21002c_lpf_value_from_bw(struct fxas21002c_data *data,
|
|
unsigned int hz)
|
|
{
|
|
int lpf_table_size = ARRAY_SIZE(fxas21002c_lpf_values);
|
|
int i;
|
|
|
|
for (i = 0; i < lpf_table_size; i++)
|
|
if (fxas21002c_lpf_values[i] == hz)
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int fxas21002c_hpf_sel_from_value(struct fxas21002c_data *data, u8 value)
|
|
{
|
|
int hpf_value_max = ARRAY_SIZE(fxas21002c_hpf_values) - 1;
|
|
|
|
value = min_t(u8, value, hpf_value_max);
|
|
|
|
return fxas21002c_hpf_values[value];
|
|
}
|
|
|
|
static int fxas21002c_hpf_value_from_sel(struct fxas21002c_data *data,
|
|
unsigned int hz)
|
|
{
|
|
int hpf_table_size = ARRAY_SIZE(fxas21002c_hpf_values);
|
|
int i;
|
|
|
|
for (i = 0; i < hpf_table_size; i++)
|
|
if (fxas21002c_hpf_values[i] == hz)
|
|
return i;
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int fxas21002c_range_fs_from_value(struct fxas21002c_data *data,
|
|
u8 value)
|
|
{
|
|
int range_value_max = ARRAY_SIZE(fxas21002c_range_values) - 1;
|
|
unsigned int fs_double;
|
|
int ret;
|
|
|
|
/* We need to check if FS_DOUBLE is enabled to offset the value */
|
|
ret = regmap_field_read(data->regmap_fields[F_FS_DOUBLE], &fs_double);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!fs_double)
|
|
value += 1;
|
|
|
|
value = min_t(u8, value, range_value_max);
|
|
|
|
return fxas21002c_range_values[value];
|
|
}
|
|
|
|
static int fxas21002c_range_value_from_fs(struct fxas21002c_data *data,
|
|
unsigned int range)
|
|
{
|
|
int range_table_size = ARRAY_SIZE(fxas21002c_range_values);
|
|
bool found = false;
|
|
int fs_double = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
for (i = 0; i < range_table_size; i++)
|
|
if (fxas21002c_range_values[i] == range) {
|
|
found = true;
|
|
break;
|
|
}
|
|
|
|
if (!found)
|
|
return -EINVAL;
|
|
|
|
if (range > FXAS21002C_RANGE_LIMIT_DOUBLE)
|
|
fs_double = 1;
|
|
|
|
ret = regmap_field_write(data->regmap_fields[F_FS_DOUBLE], fs_double);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return i;
|
|
}
|
|
|
|
static int fxas21002c_mode_get(struct fxas21002c_data *data)
|
|
{
|
|
unsigned int active;
|
|
unsigned int ready;
|
|
int ret;
|
|
|
|
ret = regmap_field_read(data->regmap_fields[F_ACTIVE], &active);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (active)
|
|
return FXAS21002C_MODE_ACTIVE;
|
|
|
|
ret = regmap_field_read(data->regmap_fields[F_READY], &ready);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (ready)
|
|
return FXAS21002C_MODE_READY;
|
|
|
|
return FXAS21002C_MODE_STANDBY;
|
|
}
|
|
|
|
static int fxas21002c_mode_set(struct fxas21002c_data *data,
|
|
enum fxas21002c_mode_state mode)
|
|
{
|
|
int ret;
|
|
|
|
if (mode == data->mode)
|
|
return 0;
|
|
|
|
if (mode == FXAS21002C_MODE_READY)
|
|
ret = regmap_field_write(data->regmap_fields[F_READY], 1);
|
|
else
|
|
ret = regmap_field_write(data->regmap_fields[F_READY], 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (mode == FXAS21002C_MODE_ACTIVE)
|
|
ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 1);
|
|
else
|
|
ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 0);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* if going to active wait the setup times */
|
|
if (mode == FXAS21002C_MODE_ACTIVE &&
|
|
data->mode == FXAS21002C_MODE_STANDBY)
|
|
msleep_interruptible(FXAS21002C_STANDBY_ACTIVE_TIME_MS);
|
|
|
|
if (data->mode == FXAS21002C_MODE_READY)
|
|
msleep_interruptible(FXAS21002C_READY_ACTIVE_TIME_MS);
|
|
|
|
data->prev_mode = data->mode;
|
|
data->mode = mode;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_write(struct fxas21002c_data *data,
|
|
enum fxas21002c_fields field, int bits)
|
|
{
|
|
int actual_mode;
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
actual_mode = fxas21002c_mode_get(data);
|
|
if (actual_mode < 0) {
|
|
ret = actual_mode;
|
|
goto out_unlock;
|
|
}
|
|
|
|
ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
|
|
ret = regmap_field_write(data->regmap_fields[field], bits);
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
|
|
ret = fxas21002c_mode_set(data, data->prev_mode);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_pm_get(struct fxas21002c_data *data)
|
|
{
|
|
return pm_runtime_resume_and_get(regmap_get_device(data->regmap));
|
|
}
|
|
|
|
static int fxas21002c_pm_put(struct fxas21002c_data *data)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
|
|
pm_runtime_mark_last_busy(dev);
|
|
|
|
return pm_runtime_put_autosuspend(dev);
|
|
}
|
|
|
|
static int fxas21002c_temp_get(struct fxas21002c_data *data, int *val)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
unsigned int temp;
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = fxas21002c_pm_get(data);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
ret = regmap_field_read(data->regmap_fields[F_TEMP], &temp);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to read temp: %d\n", ret);
|
|
fxas21002c_pm_put(data);
|
|
goto data_unlock;
|
|
}
|
|
|
|
*val = sign_extend32(temp, 7);
|
|
|
|
ret = fxas21002c_pm_put(data);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
ret = IIO_VAL_INT;
|
|
|
|
data_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_axis_get(struct fxas21002c_data *data,
|
|
int index, int *val)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
__be16 axis_be;
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = fxas21002c_pm_get(data);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
ret = regmap_bulk_read(data->regmap, FXAS21002C_AXIS_TO_REG(index),
|
|
&axis_be, sizeof(axis_be));
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to read axis: %d: %d\n", index, ret);
|
|
fxas21002c_pm_put(data);
|
|
goto data_unlock;
|
|
}
|
|
|
|
*val = sign_extend32(be16_to_cpu(axis_be), 15);
|
|
|
|
ret = fxas21002c_pm_put(data);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
ret = IIO_VAL_INT;
|
|
|
|
data_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_odr_get(struct fxas21002c_data *data, int *odr)
|
|
{
|
|
unsigned int odr_bits;
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_field_read(data->regmap_fields[F_DR], &odr_bits);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
*odr = fxas21002c_odr_hz_from_value(data, odr_bits);
|
|
|
|
ret = IIO_VAL_INT;
|
|
|
|
data_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_odr_set(struct fxas21002c_data *data, int odr)
|
|
{
|
|
int odr_bits;
|
|
|
|
odr_bits = fxas21002c_odr_value_from_hz(data, odr);
|
|
if (odr_bits < 0)
|
|
return odr_bits;
|
|
|
|
return fxas21002c_write(data, F_DR, odr_bits);
|
|
}
|
|
|
|
static int fxas21002c_lpf_get(struct fxas21002c_data *data, int *val2)
|
|
{
|
|
unsigned int bw_bits;
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_field_read(data->regmap_fields[F_BW], &bw_bits);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
*val2 = fxas21002c_lpf_bw_from_value(data, bw_bits) * 10000;
|
|
|
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
data_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_lpf_set(struct fxas21002c_data *data, int bw)
|
|
{
|
|
int bw_bits;
|
|
int odr;
|
|
int ret;
|
|
|
|
bw_bits = fxas21002c_lpf_value_from_bw(data, bw);
|
|
if (bw_bits < 0)
|
|
return bw_bits;
|
|
|
|
/*
|
|
* From table 33 of the device spec, for ODR = 25Hz and 12.5 value 0.08
|
|
* is not allowed and for ODR = 12.5 value 0.16 is also not allowed
|
|
*/
|
|
ret = fxas21002c_odr_get(data, &odr);
|
|
if (ret < 0)
|
|
return -EINVAL;
|
|
|
|
if ((odr == 25 && bw_bits > 0x01) || (odr == 12 && bw_bits > 0))
|
|
return -EINVAL;
|
|
|
|
return fxas21002c_write(data, F_BW, bw_bits);
|
|
}
|
|
|
|
static int fxas21002c_hpf_get(struct fxas21002c_data *data, int *val2)
|
|
{
|
|
unsigned int sel_bits;
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_field_read(data->regmap_fields[F_SEL], &sel_bits);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
*val2 = fxas21002c_hpf_sel_from_value(data, sel_bits);
|
|
|
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
data_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_hpf_set(struct fxas21002c_data *data, int sel)
|
|
{
|
|
int sel_bits;
|
|
|
|
sel_bits = fxas21002c_hpf_value_from_sel(data, sel);
|
|
if (sel_bits < 0)
|
|
return sel_bits;
|
|
|
|
return fxas21002c_write(data, F_SEL, sel_bits);
|
|
}
|
|
|
|
static int fxas21002c_scale_get(struct fxas21002c_data *data, int *val)
|
|
{
|
|
int fs_bits;
|
|
int scale;
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_field_read(data->regmap_fields[F_FS], &fs_bits);
|
|
if (ret < 0)
|
|
goto data_unlock;
|
|
|
|
scale = fxas21002c_range_fs_from_value(data, fs_bits);
|
|
if (scale < 0) {
|
|
ret = scale;
|
|
goto data_unlock;
|
|
}
|
|
|
|
*val = scale;
|
|
|
|
data_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_scale_set(struct fxas21002c_data *data, int range)
|
|
{
|
|
int fs_bits;
|
|
|
|
fs_bits = fxas21002c_range_value_from_fs(data, range);
|
|
if (fs_bits < 0)
|
|
return fs_bits;
|
|
|
|
return fxas21002c_write(data, F_FS, fs_bits);
|
|
}
|
|
|
|
static int fxas21002c_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val,
|
|
int *val2, long mask)
|
|
{
|
|
struct fxas21002c_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
switch (chan->type) {
|
|
case IIO_TEMP:
|
|
return fxas21002c_temp_get(data, val);
|
|
case IIO_ANGL_VEL:
|
|
return fxas21002c_axis_get(data, chan->scan_index, val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_ANGL_VEL:
|
|
*val2 = FXAS21002C_SCALE_FRACTIONAL;
|
|
ret = fxas21002c_scale_get(data, val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return IIO_VAL_FRACTIONAL;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
*val = 0;
|
|
return fxas21002c_lpf_get(data, val2);
|
|
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
|
|
*val = 0;
|
|
return fxas21002c_hpf_get(data, val2);
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val2 = 0;
|
|
return fxas21002c_odr_get(data, val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int fxas21002c_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val,
|
|
int val2, long mask)
|
|
{
|
|
struct fxas21002c_data *data = iio_priv(indio_dev);
|
|
int range;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
if (val2)
|
|
return -EINVAL;
|
|
|
|
return fxas21002c_odr_set(data, val);
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
if (val)
|
|
return -EINVAL;
|
|
|
|
val2 = val2 / 10000;
|
|
return fxas21002c_lpf_set(data, val2);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_ANGL_VEL:
|
|
range = (((val * 1000 + val2 / 1000) *
|
|
FXAS21002C_SCALE_FRACTIONAL) / 1000);
|
|
return fxas21002c_scale_set(data, range);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
|
|
return fxas21002c_hpf_set(data, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("12.5 25 50 100 200 400 800");
|
|
|
|
static IIO_CONST_ATTR(in_anglvel_filter_low_pass_3db_frequency_available,
|
|
"0.32 0.16 0.08");
|
|
|
|
static IIO_CONST_ATTR(in_anglvel_filter_high_pass_3db_frequency_available,
|
|
"0.018750 0.009625 0.004875 0.002475");
|
|
|
|
static IIO_CONST_ATTR(in_anglvel_scale_available,
|
|
"125.0 62.5 31.25 15.625 7.8125");
|
|
|
|
static struct attribute *fxas21002c_attributes[] = {
|
|
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
|
|
&iio_const_attr_in_anglvel_filter_low_pass_3db_frequency_available.dev_attr.attr,
|
|
&iio_const_attr_in_anglvel_filter_high_pass_3db_frequency_available.dev_attr.attr,
|
|
&iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group fxas21002c_attrs_group = {
|
|
.attrs = fxas21002c_attributes,
|
|
};
|
|
|
|
#define FXAS21002C_CHANNEL(_axis) { \
|
|
.type = IIO_ANGL_VEL, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##_axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
|
|
BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.scan_index = CHANNEL_SCAN_INDEX_##_axis, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec fxas21002c_channels[] = {
|
|
{
|
|
.type = IIO_TEMP,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.scan_index = -1,
|
|
},
|
|
FXAS21002C_CHANNEL(X),
|
|
FXAS21002C_CHANNEL(Y),
|
|
FXAS21002C_CHANNEL(Z),
|
|
};
|
|
|
|
static const struct iio_info fxas21002c_info = {
|
|
.attrs = &fxas21002c_attrs_group,
|
|
.read_raw = &fxas21002c_read_raw,
|
|
.write_raw = &fxas21002c_write_raw,
|
|
};
|
|
|
|
static irqreturn_t fxas21002c_trigger_handler(int irq, void *p)
|
|
{
|
|
struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
struct fxas21002c_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
mutex_lock(&data->lock);
|
|
ret = regmap_bulk_read(data->regmap, FXAS21002C_REG_OUT_X_MSB,
|
|
data->buffer, CHANNEL_SCAN_MAX * sizeof(s16));
|
|
if (ret < 0)
|
|
goto out_unlock;
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
|
|
data->timestamp);
|
|
|
|
out_unlock:
|
|
mutex_unlock(&data->lock);
|
|
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int fxas21002c_chip_init(struct fxas21002c_data *data)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
unsigned int chip_id;
|
|
int ret;
|
|
|
|
ret = regmap_field_read(data->regmap_fields[F_WHO_AM_I], &chip_id);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (chip_id != FXAS21002C_CHIP_ID_1 &&
|
|
chip_id != FXAS21002C_CHIP_ID_2) {
|
|
dev_err(dev, "chip id 0x%02x is not supported\n", chip_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
data->chip_id = chip_id;
|
|
|
|
ret = fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Set ODR to 200HZ as default */
|
|
ret = fxas21002c_odr_set(data, 200);
|
|
if (ret < 0)
|
|
dev_err(dev, "failed to set ODR: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int fxas21002c_data_rdy_trigger_set_state(struct iio_trigger *trig,
|
|
bool state)
|
|
{
|
|
struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
|
|
struct fxas21002c_data *data = iio_priv(indio_dev);
|
|
|
|
return regmap_field_write(data->regmap_fields[F_INT_EN_DRDY], state);
|
|
}
|
|
|
|
static const struct iio_trigger_ops fxas21002c_trigger_ops = {
|
|
.set_trigger_state = &fxas21002c_data_rdy_trigger_set_state,
|
|
};
|
|
|
|
static irqreturn_t fxas21002c_data_rdy_handler(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct fxas21002c_data *data = iio_priv(indio_dev);
|
|
|
|
data->timestamp = iio_get_time_ns(indio_dev);
|
|
|
|
return IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
static irqreturn_t fxas21002c_data_rdy_thread(int irq, void *private)
|
|
{
|
|
struct iio_dev *indio_dev = private;
|
|
struct fxas21002c_data *data = iio_priv(indio_dev);
|
|
unsigned int data_ready;
|
|
int ret;
|
|
|
|
ret = regmap_field_read(data->regmap_fields[F_SRC_DRDY], &data_ready);
|
|
if (ret < 0)
|
|
return IRQ_NONE;
|
|
|
|
if (!data_ready)
|
|
return IRQ_NONE;
|
|
|
|
iio_trigger_poll_chained(data->dready_trig);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int fxas21002c_trigger_probe(struct fxas21002c_data *data)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct device_node *np = indio_dev->dev.of_node;
|
|
unsigned long irq_trig;
|
|
bool irq_open_drain;
|
|
int irq1;
|
|
int ret;
|
|
|
|
if (!data->irq)
|
|
return 0;
|
|
|
|
irq1 = of_irq_get_byname(np, "INT1");
|
|
|
|
if (irq1 == data->irq) {
|
|
dev_info(dev, "using interrupt line INT1\n");
|
|
ret = regmap_field_write(data->regmap_fields[F_INT_CFG_DRDY],
|
|
1);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
dev_info(dev, "using interrupt line INT2\n");
|
|
|
|
irq_open_drain = of_property_read_bool(np, "drive-open-drain");
|
|
|
|
data->dready_trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
|
|
indio_dev->name,
|
|
iio_device_id(indio_dev));
|
|
if (!data->dready_trig)
|
|
return -ENOMEM;
|
|
|
|
irq_trig = irqd_get_trigger_type(irq_get_irq_data(data->irq));
|
|
|
|
if (irq_trig == IRQF_TRIGGER_RISING) {
|
|
ret = regmap_field_write(data->regmap_fields[F_IPOL], 1);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (irq_open_drain)
|
|
irq_trig |= IRQF_SHARED;
|
|
|
|
ret = devm_request_threaded_irq(dev, data->irq,
|
|
fxas21002c_data_rdy_handler,
|
|
fxas21002c_data_rdy_thread,
|
|
irq_trig, "fxas21002c_data_ready",
|
|
indio_dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
data->dready_trig->ops = &fxas21002c_trigger_ops;
|
|
iio_trigger_set_drvdata(data->dready_trig, indio_dev);
|
|
|
|
return devm_iio_trigger_register(dev, data->dready_trig);
|
|
}
|
|
|
|
static int fxas21002c_power_enable(struct fxas21002c_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_enable(data->vdd);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = regulator_enable(data->vddio);
|
|
if (ret < 0) {
|
|
regulator_disable(data->vdd);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fxas21002c_power_disable(struct fxas21002c_data *data)
|
|
{
|
|
regulator_disable(data->vdd);
|
|
regulator_disable(data->vddio);
|
|
}
|
|
|
|
static void fxas21002c_power_disable_action(void *_data)
|
|
{
|
|
struct fxas21002c_data *data = _data;
|
|
|
|
fxas21002c_power_disable(data);
|
|
}
|
|
|
|
static int fxas21002c_regulators_get(struct fxas21002c_data *data)
|
|
{
|
|
struct device *dev = regmap_get_device(data->regmap);
|
|
|
|
data->vdd = devm_regulator_get(dev->parent, "vdd");
|
|
if (IS_ERR(data->vdd))
|
|
return PTR_ERR(data->vdd);
|
|
|
|
data->vddio = devm_regulator_get(dev->parent, "vddio");
|
|
|
|
return PTR_ERR_OR_ZERO(data->vddio);
|
|
}
|
|
|
|
int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq,
|
|
const char *name)
|
|
{
|
|
struct fxas21002c_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct regmap_field *f;
|
|
int i;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
dev_set_drvdata(dev, indio_dev);
|
|
data->irq = irq;
|
|
data->regmap = regmap;
|
|
|
|
for (i = 0; i < F_MAX_FIELDS; i++) {
|
|
f = devm_regmap_field_alloc(dev, data->regmap,
|
|
fxas21002c_reg_fields[i]);
|
|
if (IS_ERR(f))
|
|
return PTR_ERR(f);
|
|
|
|
data->regmap_fields[i] = f;
|
|
}
|
|
|
|
mutex_init(&data->lock);
|
|
|
|
ret = fxas21002c_regulators_get(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = fxas21002c_power_enable(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_add_action_or_reset(dev, fxas21002c_power_disable_action,
|
|
data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = fxas21002c_chip_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
indio_dev->channels = fxas21002c_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(fxas21002c_channels);
|
|
indio_dev->name = name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->info = &fxas21002c_info;
|
|
|
|
ret = fxas21002c_trigger_probe(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
|
|
fxas21002c_trigger_handler, NULL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = pm_runtime_set_active(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_set_autosuspend_delay(dev, 2000);
|
|
pm_runtime_use_autosuspend(dev);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret < 0)
|
|
goto pm_disable;
|
|
|
|
return 0;
|
|
|
|
pm_disable:
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_suspended(dev);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(fxas21002c_core_probe);
|
|
|
|
void fxas21002c_core_remove(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_suspended(dev);
|
|
}
|
|
EXPORT_SYMBOL_GPL(fxas21002c_core_remove);
|
|
|
|
static int __maybe_unused fxas21002c_suspend(struct device *dev)
|
|
{
|
|
struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
|
|
|
|
fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY);
|
|
fxas21002c_power_disable(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused fxas21002c_resume(struct device *dev)
|
|
{
|
|
struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
|
|
int ret;
|
|
|
|
ret = fxas21002c_power_enable(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return fxas21002c_mode_set(data, data->prev_mode);
|
|
}
|
|
|
|
static int __maybe_unused fxas21002c_runtime_suspend(struct device *dev)
|
|
{
|
|
struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
|
|
|
|
return fxas21002c_mode_set(data, FXAS21002C_MODE_READY);
|
|
}
|
|
|
|
static int __maybe_unused fxas21002c_runtime_resume(struct device *dev)
|
|
{
|
|
struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
|
|
|
|
return fxas21002c_mode_set(data, FXAS21002C_MODE_ACTIVE);
|
|
}
|
|
|
|
const struct dev_pm_ops fxas21002c_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(fxas21002c_suspend, fxas21002c_resume)
|
|
SET_RUNTIME_PM_OPS(fxas21002c_runtime_suspend,
|
|
fxas21002c_runtime_resume, NULL)
|
|
};
|
|
EXPORT_SYMBOL_GPL(fxas21002c_pm_ops);
|
|
|
|
MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("FXAS21002C Gyro driver");
|