linux/drivers/video/backlight/lm3630a_bl.c
Andreas Kemnade 0e0e78e32e backlight: lm3630a: Add an enable gpio for the HWEN pin
For now just enable it in the probe function to allow I2C
access. Disabling also means resetting the register values
to default and according to the datasheet does not give
power savings.

Tested on Kobo Clara HD.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Reviewed-by: Dan Murphy <dmurphy@ti.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-10-02 14:25:27 +01:00

635 lines
16 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Simple driver for Texas Instruments LM3630A Backlight driver chip
* Copyright (C) 2012 Texas Instruments
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/backlight.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/regmap.h>
#include <linux/gpio/consumer.h>
#include <linux/pwm.h>
#include <linux/platform_data/lm3630a_bl.h>
#define REG_CTRL 0x00
#define REG_BOOST 0x02
#define REG_CONFIG 0x01
#define REG_BRT_A 0x03
#define REG_BRT_B 0x04
#define REG_I_A 0x05
#define REG_I_B 0x06
#define REG_INT_STATUS 0x09
#define REG_INT_EN 0x0A
#define REG_FAULT 0x0B
#define REG_PWM_OUTLOW 0x12
#define REG_PWM_OUTHIGH 0x13
#define REG_FILTER_STRENGTH 0x50
#define REG_MAX 0x50
#define INT_DEBOUNCE_MSEC 10
#define LM3630A_BANK_0 0
#define LM3630A_BANK_1 1
#define LM3630A_NUM_SINKS 2
#define LM3630A_SINK_0 0
#define LM3630A_SINK_1 1
struct lm3630a_chip {
struct device *dev;
struct delayed_work work;
int irq;
struct workqueue_struct *irqthread;
struct lm3630a_platform_data *pdata;
struct backlight_device *bleda;
struct backlight_device *bledb;
struct gpio_desc *enable_gpio;
struct regmap *regmap;
struct pwm_device *pwmd;
};
/* i2c access */
static int lm3630a_read(struct lm3630a_chip *pchip, unsigned int reg)
{
int rval;
unsigned int reg_val;
rval = regmap_read(pchip->regmap, reg, &reg_val);
if (rval < 0)
return rval;
return reg_val & 0xFF;
}
static int lm3630a_write(struct lm3630a_chip *pchip,
unsigned int reg, unsigned int data)
{
return regmap_write(pchip->regmap, reg, data);
}
static int lm3630a_update(struct lm3630a_chip *pchip,
unsigned int reg, unsigned int mask,
unsigned int data)
{
return regmap_update_bits(pchip->regmap, reg, mask, data);
}
/* initialize chip */
static int lm3630a_chip_init(struct lm3630a_chip *pchip)
{
int rval;
struct lm3630a_platform_data *pdata = pchip->pdata;
usleep_range(1000, 2000);
/* set Filter Strength Register */
rval = lm3630a_write(pchip, REG_FILTER_STRENGTH, 0x03);
/* set Cofig. register */
rval |= lm3630a_update(pchip, REG_CONFIG, 0x07, pdata->pwm_ctrl);
/* set boost control */
rval |= lm3630a_write(pchip, REG_BOOST, 0x38);
/* set current A */
rval |= lm3630a_update(pchip, REG_I_A, 0x1F, 0x1F);
/* set current B */
rval |= lm3630a_write(pchip, REG_I_B, 0x1F);
/* set control */
rval |= lm3630a_update(pchip, REG_CTRL, 0x14, pdata->leda_ctrl);
rval |= lm3630a_update(pchip, REG_CTRL, 0x0B, pdata->ledb_ctrl);
usleep_range(1000, 2000);
/* set brightness A and B */
rval |= lm3630a_write(pchip, REG_BRT_A, pdata->leda_init_brt);
rval |= lm3630a_write(pchip, REG_BRT_B, pdata->ledb_init_brt);
if (rval < 0)
dev_err(pchip->dev, "i2c failed to access register\n");
return rval;
}
/* interrupt handling */
static void lm3630a_delayed_func(struct work_struct *work)
{
int rval;
struct lm3630a_chip *pchip;
pchip = container_of(work, struct lm3630a_chip, work.work);
rval = lm3630a_read(pchip, REG_INT_STATUS);
if (rval < 0) {
dev_err(pchip->dev,
"i2c failed to access REG_INT_STATUS Register\n");
return;
}
dev_info(pchip->dev, "REG_INT_STATUS Register is 0x%x\n", rval);
}
static irqreturn_t lm3630a_isr_func(int irq, void *chip)
{
int rval;
struct lm3630a_chip *pchip = chip;
unsigned long delay = msecs_to_jiffies(INT_DEBOUNCE_MSEC);
queue_delayed_work(pchip->irqthread, &pchip->work, delay);
rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
if (rval < 0) {
dev_err(pchip->dev, "i2c failed to access register\n");
return IRQ_NONE;
}
return IRQ_HANDLED;
}
static int lm3630a_intr_config(struct lm3630a_chip *pchip)
{
int rval;
rval = lm3630a_write(pchip, REG_INT_EN, 0x87);
if (rval < 0)
return rval;
INIT_DELAYED_WORK(&pchip->work, lm3630a_delayed_func);
pchip->irqthread = create_singlethread_workqueue("lm3630a-irqthd");
if (!pchip->irqthread) {
dev_err(pchip->dev, "create irq thread fail\n");
return -ENOMEM;
}
if (request_threaded_irq
(pchip->irq, NULL, lm3630a_isr_func,
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "lm3630a_irq", pchip)) {
dev_err(pchip->dev, "request threaded irq fail\n");
destroy_workqueue(pchip->irqthread);
return -ENOMEM;
}
return rval;
}
static void lm3630a_pwm_ctrl(struct lm3630a_chip *pchip, int br, int br_max)
{
unsigned int period = pchip->pdata->pwm_period;
unsigned int duty = br * period / br_max;
pwm_config(pchip->pwmd, duty, period);
if (duty)
pwm_enable(pchip->pwmd);
else
pwm_disable(pchip->pwmd);
}
/* update and get brightness */
static int lm3630a_bank_a_update_status(struct backlight_device *bl)
{
int ret;
struct lm3630a_chip *pchip = bl_get_data(bl);
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
/* pwm control */
if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
lm3630a_pwm_ctrl(pchip, bl->props.brightness,
bl->props.max_brightness);
return bl->props.brightness;
}
/* disable sleep */
ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
if (ret < 0)
goto out_i2c_err;
usleep_range(1000, 2000);
/* minimum brightness is 0x04 */
ret = lm3630a_write(pchip, REG_BRT_A, bl->props.brightness);
if (bl->props.brightness < 0x4)
ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDA_ENABLE, 0);
else
ret |= lm3630a_update(pchip, REG_CTRL,
LM3630A_LEDA_ENABLE, LM3630A_LEDA_ENABLE);
if (ret < 0)
goto out_i2c_err;
return 0;
out_i2c_err:
dev_err(pchip->dev, "i2c failed to access\n");
return bl->props.brightness;
}
static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
{
int brightness, rval;
struct lm3630a_chip *pchip = bl_get_data(bl);
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
rval = lm3630a_read(pchip, REG_PWM_OUTHIGH);
if (rval < 0)
goto out_i2c_err;
brightness = (rval & 0x01) << 8;
rval = lm3630a_read(pchip, REG_PWM_OUTLOW);
if (rval < 0)
goto out_i2c_err;
brightness |= rval;
goto out;
}
/* disable sleep */
rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
if (rval < 0)
goto out_i2c_err;
usleep_range(1000, 2000);
rval = lm3630a_read(pchip, REG_BRT_A);
if (rval < 0)
goto out_i2c_err;
brightness = rval;
out:
bl->props.brightness = brightness;
return bl->props.brightness;
out_i2c_err:
dev_err(pchip->dev, "i2c failed to access register\n");
return 0;
}
static const struct backlight_ops lm3630a_bank_a_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = lm3630a_bank_a_update_status,
.get_brightness = lm3630a_bank_a_get_brightness,
};
/* update and get brightness */
static int lm3630a_bank_b_update_status(struct backlight_device *bl)
{
int ret;
struct lm3630a_chip *pchip = bl_get_data(bl);
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
/* pwm control */
if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
lm3630a_pwm_ctrl(pchip, bl->props.brightness,
bl->props.max_brightness);
return bl->props.brightness;
}
/* disable sleep */
ret = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
if (ret < 0)
goto out_i2c_err;
usleep_range(1000, 2000);
/* minimum brightness is 0x04 */
ret = lm3630a_write(pchip, REG_BRT_B, bl->props.brightness);
if (bl->props.brightness < 0x4)
ret |= lm3630a_update(pchip, REG_CTRL, LM3630A_LEDB_ENABLE, 0);
else
ret |= lm3630a_update(pchip, REG_CTRL,
LM3630A_LEDB_ENABLE, LM3630A_LEDB_ENABLE);
if (ret < 0)
goto out_i2c_err;
return 0;
out_i2c_err:
dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
return bl->props.brightness;
}
static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
{
int brightness, rval;
struct lm3630a_chip *pchip = bl_get_data(bl);
enum lm3630a_pwm_ctrl pwm_ctrl = pchip->pdata->pwm_ctrl;
if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
rval = lm3630a_read(pchip, REG_PWM_OUTHIGH);
if (rval < 0)
goto out_i2c_err;
brightness = (rval & 0x01) << 8;
rval = lm3630a_read(pchip, REG_PWM_OUTLOW);
if (rval < 0)
goto out_i2c_err;
brightness |= rval;
goto out;
}
/* disable sleep */
rval = lm3630a_update(pchip, REG_CTRL, 0x80, 0x00);
if (rval < 0)
goto out_i2c_err;
usleep_range(1000, 2000);
rval = lm3630a_read(pchip, REG_BRT_B);
if (rval < 0)
goto out_i2c_err;
brightness = rval;
out:
bl->props.brightness = brightness;
return bl->props.brightness;
out_i2c_err:
dev_err(pchip->dev, "i2c failed to access register\n");
return 0;
}
static const struct backlight_ops lm3630a_bank_b_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = lm3630a_bank_b_update_status,
.get_brightness = lm3630a_bank_b_get_brightness,
};
static int lm3630a_backlight_register(struct lm3630a_chip *pchip)
{
struct lm3630a_platform_data *pdata = pchip->pdata;
struct backlight_properties props;
const char *label;
props.type = BACKLIGHT_RAW;
if (pdata->leda_ctrl != LM3630A_LEDA_DISABLE) {
props.brightness = pdata->leda_init_brt;
props.max_brightness = pdata->leda_max_brt;
label = pdata->leda_label ? pdata->leda_label : "lm3630a_leda";
pchip->bleda =
devm_backlight_device_register(pchip->dev, label,
pchip->dev, pchip,
&lm3630a_bank_a_ops, &props);
if (IS_ERR(pchip->bleda))
return PTR_ERR(pchip->bleda);
}
if ((pdata->ledb_ctrl != LM3630A_LEDB_DISABLE) &&
(pdata->ledb_ctrl != LM3630A_LEDB_ON_A)) {
props.brightness = pdata->ledb_init_brt;
props.max_brightness = pdata->ledb_max_brt;
label = pdata->ledb_label ? pdata->ledb_label : "lm3630a_ledb";
pchip->bledb =
devm_backlight_device_register(pchip->dev, label,
pchip->dev, pchip,
&lm3630a_bank_b_ops, &props);
if (IS_ERR(pchip->bledb))
return PTR_ERR(pchip->bledb);
}
return 0;
}
static const struct regmap_config lm3630a_regmap = {
.reg_bits = 8,
.val_bits = 8,
.max_register = REG_MAX,
};
static int lm3630a_parse_led_sources(struct fwnode_handle *node,
int default_led_sources)
{
u32 sources[LM3630A_NUM_SINKS];
int ret, num_sources, i;
num_sources = fwnode_property_count_u32(node, "led-sources");
if (num_sources < 0)
return default_led_sources;
else if (num_sources > ARRAY_SIZE(sources))
return -EINVAL;
ret = fwnode_property_read_u32_array(node, "led-sources", sources,
num_sources);
if (ret)
return ret;
for (i = 0; i < num_sources; i++) {
if (sources[i] < LM3630A_SINK_0 || sources[i] > LM3630A_SINK_1)
return -EINVAL;
ret |= BIT(sources[i]);
}
return ret;
}
static int lm3630a_parse_bank(struct lm3630a_platform_data *pdata,
struct fwnode_handle *node, int *seen_led_sources)
{
int led_sources, ret;
const char *label;
u32 bank, val;
bool linear;
ret = fwnode_property_read_u32(node, "reg", &bank);
if (ret)
return ret;
if (bank < LM3630A_BANK_0 || bank > LM3630A_BANK_1)
return -EINVAL;
led_sources = lm3630a_parse_led_sources(node, BIT(bank));
if (led_sources < 0)
return led_sources;
if (*seen_led_sources & led_sources)
return -EINVAL;
*seen_led_sources |= led_sources;
linear = fwnode_property_read_bool(node,
"ti,linear-mapping-mode");
if (bank) {
if (led_sources & BIT(LM3630A_SINK_0) ||
!(led_sources & BIT(LM3630A_SINK_1)))
return -EINVAL;
pdata->ledb_ctrl = linear ?
LM3630A_LEDB_ENABLE_LINEAR :
LM3630A_LEDB_ENABLE;
} else {
if (!(led_sources & BIT(LM3630A_SINK_0)))
return -EINVAL;
pdata->leda_ctrl = linear ?
LM3630A_LEDA_ENABLE_LINEAR :
LM3630A_LEDA_ENABLE;
if (led_sources & BIT(LM3630A_SINK_1))
pdata->ledb_ctrl = LM3630A_LEDB_ON_A;
}
ret = fwnode_property_read_string(node, "label", &label);
if (!ret) {
if (bank)
pdata->ledb_label = label;
else
pdata->leda_label = label;
}
ret = fwnode_property_read_u32(node, "default-brightness",
&val);
if (!ret) {
if (bank)
pdata->ledb_init_brt = val;
else
pdata->leda_init_brt = val;
}
ret = fwnode_property_read_u32(node, "max-brightness", &val);
if (!ret) {
if (bank)
pdata->ledb_max_brt = val;
else
pdata->leda_max_brt = val;
}
return 0;
}
static int lm3630a_parse_node(struct lm3630a_chip *pchip,
struct lm3630a_platform_data *pdata)
{
int ret = -ENODEV, seen_led_sources = 0;
struct fwnode_handle *node;
device_for_each_child_node(pchip->dev, node) {
ret = lm3630a_parse_bank(pdata, node, &seen_led_sources);
if (ret)
return ret;
}
return ret;
}
static int lm3630a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct lm3630a_platform_data *pdata = dev_get_platdata(&client->dev);
struct lm3630a_chip *pchip;
int rval;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(&client->dev, "fail : i2c functionality check\n");
return -EOPNOTSUPP;
}
pchip = devm_kzalloc(&client->dev, sizeof(struct lm3630a_chip),
GFP_KERNEL);
if (!pchip)
return -ENOMEM;
pchip->dev = &client->dev;
pchip->regmap = devm_regmap_init_i2c(client, &lm3630a_regmap);
if (IS_ERR(pchip->regmap)) {
rval = PTR_ERR(pchip->regmap);
dev_err(&client->dev, "fail : allocate reg. map: %d\n", rval);
return rval;
}
i2c_set_clientdata(client, pchip);
if (pdata == NULL) {
pdata = devm_kzalloc(pchip->dev,
sizeof(struct lm3630a_platform_data),
GFP_KERNEL);
if (pdata == NULL)
return -ENOMEM;
/* default values */
pdata->leda_max_brt = LM3630A_MAX_BRIGHTNESS;
pdata->ledb_max_brt = LM3630A_MAX_BRIGHTNESS;
pdata->leda_init_brt = LM3630A_MAX_BRIGHTNESS;
pdata->ledb_init_brt = LM3630A_MAX_BRIGHTNESS;
rval = lm3630a_parse_node(pchip, pdata);
if (rval) {
dev_err(&client->dev, "fail : parse node\n");
return rval;
}
}
pchip->pdata = pdata;
pchip->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable",
GPIOD_OUT_HIGH);
if (IS_ERR(pchip->enable_gpio)) {
rval = PTR_ERR(pchip->enable_gpio);
return rval;
}
/* chip initialize */
rval = lm3630a_chip_init(pchip);
if (rval < 0) {
dev_err(&client->dev, "fail : init chip\n");
return rval;
}
/* backlight register */
rval = lm3630a_backlight_register(pchip);
if (rval < 0) {
dev_err(&client->dev, "fail : backlight register.\n");
return rval;
}
/* pwm */
if (pdata->pwm_ctrl != LM3630A_PWM_DISABLE) {
pchip->pwmd = devm_pwm_get(pchip->dev, "lm3630a-pwm");
if (IS_ERR(pchip->pwmd)) {
dev_err(&client->dev, "fail : get pwm device\n");
return PTR_ERR(pchip->pwmd);
}
/*
* FIXME: pwm_apply_args() should be removed when switching to
* the atomic PWM API.
*/
pwm_apply_args(pchip->pwmd);
}
/* interrupt enable : irq 0 is not allowed */
pchip->irq = client->irq;
if (pchip->irq) {
rval = lm3630a_intr_config(pchip);
if (rval < 0)
return rval;
}
dev_info(&client->dev, "LM3630A backlight register OK.\n");
return 0;
}
static int lm3630a_remove(struct i2c_client *client)
{
int rval;
struct lm3630a_chip *pchip = i2c_get_clientdata(client);
rval = lm3630a_write(pchip, REG_BRT_A, 0);
if (rval < 0)
dev_err(pchip->dev, "i2c failed to access register\n");
rval = lm3630a_write(pchip, REG_BRT_B, 0);
if (rval < 0)
dev_err(pchip->dev, "i2c failed to access register\n");
if (pchip->irq) {
free_irq(pchip->irq, pchip);
flush_workqueue(pchip->irqthread);
destroy_workqueue(pchip->irqthread);
}
return 0;
}
static const struct i2c_device_id lm3630a_id[] = {
{LM3630A_NAME, 0},
{}
};
MODULE_DEVICE_TABLE(i2c, lm3630a_id);
static const struct of_device_id lm3630a_match_table[] = {
{ .compatible = "ti,lm3630a", },
{ },
};
MODULE_DEVICE_TABLE(of, lm3630a_match_table);
static struct i2c_driver lm3630a_i2c_driver = {
.driver = {
.name = LM3630A_NAME,
.of_match_table = lm3630a_match_table,
},
.probe = lm3630a_probe,
.remove = lm3630a_remove,
.id_table = lm3630a_id,
};
module_i2c_driver(lm3630a_i2c_driver);
MODULE_DESCRIPTION("Texas Instruments Backlight driver for LM3630A");
MODULE_AUTHOR("Daniel Jeong <gshark.jeong@gmail.com>");
MODULE_AUTHOR("LDD MLP <ldd-mlp@list.ti.com>");
MODULE_LICENSE("GPL v2");