Romain Degez b32bfc06ae ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode) ... Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by registering the board in the ahci_pci_tbl[]. Note: this HBA also provide a hardware RAID mode when activated in BIOS but specific drivers from the manufacturer are required in this case. Signed-off-by: Romain Degez <romain.degez@gmail.com> Tested-by: Romain Degez <romain.degez@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org		2014-07-18 18:00:50 -04:00
..
acard-ahci.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
ahci_da850.c	libahci_platform: add host_flags parameter in ahci_platform_init_host()	2014-05-14 13:07:10 -04:00
ahci_imx.c	ata: ahci_imx: warn when disabling ahci link	2014-06-24 17:58:14 -04:00
ahci_mvebu.c	libahci_platform: add host_flags parameter in ahci_platform_init_host()	2014-05-14 13:07:10 -04:00
ahci_platform.c	ahci: disable ncq feature for hisilicon sata	2014-06-24 16:54:23 -04:00
ahci_st.c	libahci_platform: add host_flags parameter in ahci_platform_init_host()	2014-05-14 13:07:10 -04:00
ahci_sunxi.c	libahci_platform: add host_flags parameter in ahci_platform_init_host()	2014-05-14 13:07:10 -04:00
ahci_xgene.c	ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.	2014-07-08 11:46:05 -04:00
ahci.c	ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode)	2014-07-18 18:00:50 -04:00
ahci.h	libahci: export ahci_qc_issue() and ahci_start_fix_rx()	2014-07-08 11:46:05 -04:00
ata_generic.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
ata_piix.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
Kconfig	Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2014-06-09 14:58:36 -07:00
libahci_platform.c	libahci_platform: Fail when PHY required but PHY support disabled	2014-06-17 12:10:59 -04:00
libahci.c	libahci: export ahci_qc_issue() and ahci_start_fix_rx()	2014-07-08 11:46:05 -04:00
libata-acpi.c	ACPI and power management updates for 3.15-rc1	2014-04-01 12:48:54 -07:00
libata-core.c	libata: support the ata host which implements a queue depth less than 32	2014-07-14 12:38:20 -04:00
libata-eh.c	libata: EH should handle AMNF error condition as a media error	2014-07-15 11:13:57 -04:00
libata-pmp.c	ata: enable quirk from jmicron JMB350 for JMB394	2014-01-31 07:05:44 -05:00
libata-scsi.c	ata: SATL compliance for Inquiry Product Revision	2014-05-02 10:57:47 -04:00
libata-sff.c	libata-sff: remove dead code	2014-05-04 15:01:42 -04:00
libata-transport.c	libata: Fix display of sata speed	2013-10-27 07:43:25 -04:00
libata-transport.h	[libata] Add ATA transport class	2010-10-21 20:21:03 -04:00
libata-zpodd.c	libata: zpodd: eliminate odd_can_poweroff	2014-03-14 11:23:47 -04:00
libata.h	ATA / ACPI: remove power dependent device handling	2013-10-17 15:38:53 +02:00
Makefile	ata: ahci_mvebu: new driver for Marvell Armada 380 AHCI interfaces	2014-05-04 15:28:59 -04:00
pata_acpi.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ali.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_amd.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_arasan_cf.c	pata_arasan_cf: fix ata_host_activate() failure handling	2014-04-14 13:50:03 -04:00
pata_artop.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_at32.c	ata: use dev_get_platdata()	2013-07-30 08:59:24 -04:00
pata_at91.c	pata_at91: fix ata_host_activate() failure handling	2014-04-02 13:17:31 -04:00
pata_atiixp.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_atp867x.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_bf54x.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cmd64x.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cmd640.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cs5520.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cs5530.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cs5535.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cs5536.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_cypress.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_efar.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ep93xx.c	drivers/ata/pata_ep93xx.c: use signed int type for result of platform_get_irq()	2014-07-17 08:36:13 -04:00
pata_hpt3x2n.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
pata_hpt3x3.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_hpt37x.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
pata_hpt366.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_icside.c	Drivers: ata: remove __dev* attributes.	2013-01-03 15:57:03 -08:00
pata_imx.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_isapnp.c	pata_isapnp: Don't use invalid I/O ports	2013-10-07 15:17:32 -04:00
pata_it821x.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_it8213.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c	DMA-API: others: use dma_set_coherent_mask()	2013-10-31 14:49:07 +00:00
pata_jmicron.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_legacy.c	pata_legacy: Remove dead code	2014-03-11 08:30:53 -04:00
pata_macio.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_marvell.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_mpc52xx.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_mpiix.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_netcell.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ninja32.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ns87410.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_ns87415.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_octeon_cf.c	pata_octeon_cf: use devm_kzalloc() to allocate cf_port	2014-04-14 13:33:28 -04:00
pata_of_platform.c	Drivers: ata: remove __dev* attributes.	2013-01-03 15:57:03 -08:00
pata_oldpiix.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_opti.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_optidma.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_palmld.c	Drivers: ata: remove __dev* attributes.	2013-01-03 15:57:03 -08:00
pata_pcmcia.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_pdc2027x.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_piccolo.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_platform.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
pata_pxa.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
pata_radisys.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_rb532_cf.c	Drivers: ata: remove __dev* attributes.	2013-01-03 15:57:03 -08:00
pata_rdc.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_rz1000.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_samsung_cf.c	Merge branch 'for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata	2014-06-09 14:58:36 -07:00
pata_sc1200.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_scc.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_sch.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_serverworks.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_sil680.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_sis.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_sl82c105.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_triflex.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pata_via.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
pdc_adma.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c	ata: remove superfluous casts	2014-03-26 12:36:53 -04:00
sata_fsl.c	sata_fsl: remove check for CONFIG_MPC8315_DS	2014-05-21 15:36:22 -04:00
sata_highbank.c	ata: sata_highbank: remove superfluous cast	2014-03-26 11:42:01 -04:00
sata_inic162x.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_mv.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_nv.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_promise.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
sata_promise.h	libata annotations and fixes	2008-01-23 05:24:15 -05:00
sata_qstor.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
sata_rcar.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_sil24.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_sil.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_sis.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_svw.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
sata_sx4.c	ata: remove superfluous casts	2014-03-26 12:36:53 -04:00
sata_uli.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
sata_via.c	ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers	2014-05-09 22:37:49 -04:00
sata_vsc.c	ata: delete non-required instances of include <linux/init.h>	2014-02-13 16:40:56 -05:00
sis.h	libata: PATA-mode fixes for sis_sata	2007-07-02 10:17:42 -04:00