Tony Lindgren 96554d7077 omap: Use a memory address for storing the debug port info instead of UART1 scratchpad ... This removes the dependency to the UART1 being available for storing the debug configuration in uncompress.h. This will simplify the DEBUG_LL UART configuration for boards that may not have UART1, or have an external UART as it requires only one mapping for DEBUG_LL. The patch has a few limitations. Basically now we're assuming that the kernel uncompress code won't overlap with OMAP_UART_INFO. We also assume the printascii is called at least once before paging_init in order for addruart to have a chance to read the UART setup from OMAP_UART_INFO. As suggested by Cyril Chemparathy <cyril@ti.com>, Vikram Pandita <vikram.pandita@ti.com> and Kevin Hilman <khilman@deeprootsystems.com>. Based on an earlier patch posted for Davinci by Cyril Chemparathy <cyril@ti.com>. Signed-off-by: Tony Lindgren <tony@atomide.com>		2010-05-03 17:53:08 -07:00
..
include/mach	omap: Use a memory address for storing the debug port info instead of UART1 scratchpad	2010-05-03 17:53:08 -07:00
board-ams-delta.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-fsample.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-generic.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-h2-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h2.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-h2.h	ARM: OMAP: No need to include board-h2.h from hardware.h	2009-03-23 18:07:33 -07:00
board-h3-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h3.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-h3.h	ARM: OMAP: No need to include board-h3.h from hardware.h	2009-03-23 18:07:33 -07:00
board-htcherald.c	omap1: Add omap7xx USB support	2009-12-11 16:16:34 -08:00
board-innovator.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-nokia770.c	OMAP: OMAPFB: split omapfb.h	2009-12-09 12:04:06 +02:00
board-osk.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-palmte.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-palmtt.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-palmz71.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-perseus2.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-sx1-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-sx1.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
board-voiceblue.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
clock_data.c	OMAP4: clock: Add dummy clock nodes for interface clocks	2010-02-24 17:45:17 -07:00
clock.c	OMAP4: clock: Add dummy clock nodes for interface clocks	2010-02-24 17:45:17 -07:00
clock.h	OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c	2009-12-11 17:00:40 -07:00
devices.c	omap1: mailbox: kill compile warning	2010-02-15 10:03:33 -08:00
flash.c	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
fpga.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
i2c.c	omap: i2c: Fix muxing for command line enabled bus	2010-02-25 14:45:08 -08:00
id.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
io.c	OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c	2009-12-11 17:00:40 -07:00
irq.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
Kconfig	omap1: Add board support and LCD for HTC Herald	2009-11-22 10:24:33 -08:00
lcd_dma.c	omap1: LCD_DMA: Use some define rather than a hexadecimal	2009-12-11 16:16:36 -08:00
leds-h2p2-debug.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
leds-innovator.c	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
leds-osk.c	ARM: OMAP: switch to standard gpio get/set calls	2008-12-10 17:35:25 -08:00
leds.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
leds.h	[PATCH] ARM: 2799/1: OMAP update 4/11: Move OMAP1 LED code into mach-omap1 directory	2005-07-10 19:58:10 +01:00
mailbox.c	omap1: mailbox: kill compile warning	2010-02-15 10:03:33 -08:00
Makefile	omap: convert boards to use physmap-flash	2010-02-15 10:03:32 -08:00
Makefile.boot	[PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 and omap2	2005-07-10 19:58:08 +01:00
mcbsp.c	include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h	2010-03-30 22:02:32 +09:00
mux.c	omap1: Add 7xx clocks and pin muxes for SPI	2010-01-08 10:29:05 -08:00
opp_data.c	OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c	2009-12-11 17:00:40 -07:00
opp.h	OMAP1 clock: convert mach-omap1/clock.h to mach-omap1/clock_data.c	2009-12-11 17:00:40 -07:00
pm.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
pm.h	OMAP850: PM: Add an ARCH_OMAP850 check	2009-10-07 23:14:08 +01:00
serial.c	omap: Clean the serial port defines	2010-02-15 08:48:53 -08:00
sleep.S	OMAP7XX: Rename all the rest of the omap730 references in omap1 core	2009-10-07 23:14:06 +01:00
sram.S	OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead	2009-08-28 10:50:33 -07:00
time.c	OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead	2009-08-28 10:50:33 -07:00
timer32k.c	arm: omap1: remove dead code from timer32k.c	2010-04-22 17:32:36 -07:00