linux/arch/x86/xen/setup.c
Roger Pau Monne af44a387e7 Revert "xen: fix p2m size in dom0 for disabled memory hotplug case"
This partially reverts commit 882213990d ("xen: fix p2m size in dom0
for disabled memory hotplug case")

There's no need to special case XEN_UNPOPULATED_ALLOC anymore in order
to correctly size the p2m. The generic memory hotplug option has
already been tied together with the Xen hotplug limit, so enabling
memory hotplug should already trigger a properly sized p2m on Xen PV.

Note that XEN_UNPOPULATED_ALLOC depends on ZONE_DEVICE which pulls in
MEMORY_HOTPLUG.

Leave the check added to __set_phys_to_machine and the adjusted
comment about EXTRA_MEM_RATIO.

Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210324122424.58685-3-roger.pau@citrix.com

[boris: fixed formatting issues]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-03-24 18:33:36 -05:00

991 lines
26 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Machine specific setup for xen
*
* Jeremy Fitzhardinge <jeremy@xensource.com>, XenSource Inc, 2007
*/
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/memblock.h>
#include <linux/cpuidle.h>
#include <linux/cpufreq.h>
#include <linux/memory_hotplug.h>
#include <asm/elf.h>
#include <asm/vdso.h>
#include <asm/e820/api.h>
#include <asm/setup.h>
#include <asm/acpi.h>
#include <asm/numa.h>
#include <asm/idtentry.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
#include <xen/xen.h>
#include <xen/page.h>
#include <xen/interface/callback.h>
#include <xen/interface/memory.h>
#include <xen/interface/physdev.h>
#include <xen/features.h>
#include <xen/hvc-console.h>
#include "xen-ops.h"
#include "mmu.h"
#define GB(x) ((uint64_t)(x) * 1024 * 1024 * 1024)
/* Amount of extra memory space we add to the e820 ranges */
struct xen_memory_region xen_extra_mem[XEN_EXTRA_MEM_MAX_REGIONS] __initdata;
/* Number of pages released from the initial allocation. */
unsigned long xen_released_pages;
/* E820 map used during setting up memory. */
static struct e820_table xen_e820_table __initdata;
/*
* Buffer used to remap identity mapped pages. We only need the virtual space.
* The physical page behind this address is remapped as needed to different
* buffer pages.
*/
#define REMAP_SIZE (P2M_PER_PAGE - 3)
static struct {
unsigned long next_area_mfn;
unsigned long target_pfn;
unsigned long size;
unsigned long mfns[REMAP_SIZE];
} xen_remap_buf __initdata __aligned(PAGE_SIZE);
static unsigned long xen_remap_mfn __initdata = INVALID_P2M_ENTRY;
/*
* The maximum amount of extra memory compared to the base size. The
* main scaling factor is the size of struct page. At extreme ratios
* of base:extra, all the base memory can be filled with page
* structures for the extra memory, leaving no space for anything
* else.
*
* 10x seems like a reasonable balance between scaling flexibility and
* leaving a practically usable system.
*/
#define EXTRA_MEM_RATIO (10)
static bool xen_512gb_limit __initdata = IS_ENABLED(CONFIG_XEN_512GB);
static void __init xen_parse_512gb(void)
{
bool val = false;
char *arg;
arg = strstr(xen_start_info->cmd_line, "xen_512gb_limit");
if (!arg)
return;
arg = strstr(xen_start_info->cmd_line, "xen_512gb_limit=");
if (!arg)
val = true;
else if (strtobool(arg + strlen("xen_512gb_limit="), &val))
return;
xen_512gb_limit = val;
}
static void __init xen_add_extra_mem(unsigned long start_pfn,
unsigned long n_pfns)
{
int i;
/*
* No need to check for zero size, should happen rarely and will only
* write a new entry regarded to be unused due to zero size.
*/
for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
/* Add new region. */
if (xen_extra_mem[i].n_pfns == 0) {
xen_extra_mem[i].start_pfn = start_pfn;
xen_extra_mem[i].n_pfns = n_pfns;
break;
}
/* Append to existing region. */
if (xen_extra_mem[i].start_pfn + xen_extra_mem[i].n_pfns ==
start_pfn) {
xen_extra_mem[i].n_pfns += n_pfns;
break;
}
}
if (i == XEN_EXTRA_MEM_MAX_REGIONS)
printk(KERN_WARNING "Warning: not enough extra memory regions\n");
memblock_reserve(PFN_PHYS(start_pfn), PFN_PHYS(n_pfns));
}
static void __init xen_del_extra_mem(unsigned long start_pfn,
unsigned long n_pfns)
{
int i;
unsigned long start_r, size_r;
for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
start_r = xen_extra_mem[i].start_pfn;
size_r = xen_extra_mem[i].n_pfns;
/* Start of region. */
if (start_r == start_pfn) {
BUG_ON(n_pfns > size_r);
xen_extra_mem[i].start_pfn += n_pfns;
xen_extra_mem[i].n_pfns -= n_pfns;
break;
}
/* End of region. */
if (start_r + size_r == start_pfn + n_pfns) {
BUG_ON(n_pfns > size_r);
xen_extra_mem[i].n_pfns -= n_pfns;
break;
}
/* Mid of region. */
if (start_pfn > start_r && start_pfn < start_r + size_r) {
BUG_ON(start_pfn + n_pfns > start_r + size_r);
xen_extra_mem[i].n_pfns = start_pfn - start_r;
/* Calling memblock_reserve() again is okay. */
xen_add_extra_mem(start_pfn + n_pfns, start_r + size_r -
(start_pfn + n_pfns));
break;
}
}
memblock_free(PFN_PHYS(start_pfn), PFN_PHYS(n_pfns));
}
/*
* Called during boot before the p2m list can take entries beyond the
* hypervisor supplied p2m list. Entries in extra mem are to be regarded as
* invalid.
*/
unsigned long __ref xen_chk_extra_mem(unsigned long pfn)
{
int i;
for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
if (pfn >= xen_extra_mem[i].start_pfn &&
pfn < xen_extra_mem[i].start_pfn + xen_extra_mem[i].n_pfns)
return INVALID_P2M_ENTRY;
}
return IDENTITY_FRAME(pfn);
}
/*
* Mark all pfns of extra mem as invalid in p2m list.
*/
void __init xen_inv_extra_mem(void)
{
unsigned long pfn, pfn_s, pfn_e;
int i;
for (i = 0; i < XEN_EXTRA_MEM_MAX_REGIONS; i++) {
if (!xen_extra_mem[i].n_pfns)
continue;
pfn_s = xen_extra_mem[i].start_pfn;
pfn_e = pfn_s + xen_extra_mem[i].n_pfns;
for (pfn = pfn_s; pfn < pfn_e; pfn++)
set_phys_to_machine(pfn, INVALID_P2M_ENTRY);
}
}
/*
* Finds the next RAM pfn available in the E820 map after min_pfn.
* This function updates min_pfn with the pfn found and returns
* the size of that range or zero if not found.
*/
static unsigned long __init xen_find_pfn_range(unsigned long *min_pfn)
{
const struct e820_entry *entry = xen_e820_table.entries;
unsigned int i;
unsigned long done = 0;
for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
unsigned long s_pfn;
unsigned long e_pfn;
if (entry->type != E820_TYPE_RAM)
continue;
e_pfn = PFN_DOWN(entry->addr + entry->size);
/* We only care about E820 after this */
if (e_pfn <= *min_pfn)
continue;
s_pfn = PFN_UP(entry->addr);
/* If min_pfn falls within the E820 entry, we want to start
* at the min_pfn PFN.
*/
if (s_pfn <= *min_pfn) {
done = e_pfn - *min_pfn;
} else {
done = e_pfn - s_pfn;
*min_pfn = s_pfn;
}
break;
}
return done;
}
static int __init xen_free_mfn(unsigned long mfn)
{
struct xen_memory_reservation reservation = {
.address_bits = 0,
.extent_order = 0,
.domid = DOMID_SELF
};
set_xen_guest_handle(reservation.extent_start, &mfn);
reservation.nr_extents = 1;
return HYPERVISOR_memory_op(XENMEM_decrease_reservation, &reservation);
}
/*
* This releases a chunk of memory and then does the identity map. It's used
* as a fallback if the remapping fails.
*/
static void __init xen_set_identity_and_release_chunk(unsigned long start_pfn,
unsigned long end_pfn, unsigned long nr_pages)
{
unsigned long pfn, end;
int ret;
WARN_ON(start_pfn > end_pfn);
/* Release pages first. */
end = min(end_pfn, nr_pages);
for (pfn = start_pfn; pfn < end; pfn++) {
unsigned long mfn = pfn_to_mfn(pfn);
/* Make sure pfn exists to start with */
if (mfn == INVALID_P2M_ENTRY || mfn_to_pfn(mfn) != pfn)
continue;
ret = xen_free_mfn(mfn);
WARN(ret != 1, "Failed to release pfn %lx err=%d\n", pfn, ret);
if (ret == 1) {
xen_released_pages++;
if (!__set_phys_to_machine(pfn, INVALID_P2M_ENTRY))
break;
} else
break;
}
set_phys_range_identity(start_pfn, end_pfn);
}
/*
* Helper function to update the p2m and m2p tables and kernel mapping.
*/
static void __init xen_update_mem_tables(unsigned long pfn, unsigned long mfn)
{
struct mmu_update update = {
.ptr = ((uint64_t)mfn << PAGE_SHIFT) | MMU_MACHPHYS_UPDATE,
.val = pfn
};
/* Update p2m */
if (!set_phys_to_machine(pfn, mfn)) {
WARN(1, "Failed to set p2m mapping for pfn=%ld mfn=%ld\n",
pfn, mfn);
BUG();
}
/* Update m2p */
if (HYPERVISOR_mmu_update(&update, 1, NULL, DOMID_SELF) < 0) {
WARN(1, "Failed to set m2p mapping for mfn=%ld pfn=%ld\n",
mfn, pfn);
BUG();
}
/* Update kernel mapping, but not for highmem. */
if (pfn >= PFN_UP(__pa(high_memory - 1)))
return;
if (HYPERVISOR_update_va_mapping((unsigned long)__va(pfn << PAGE_SHIFT),
mfn_pte(mfn, PAGE_KERNEL), 0)) {
WARN(1, "Failed to update kernel mapping for mfn=%ld pfn=%ld\n",
mfn, pfn);
BUG();
}
}
/*
* This function updates the p2m and m2p tables with an identity map from
* start_pfn to start_pfn+size and prepares remapping the underlying RAM of the
* original allocation at remap_pfn. The information needed for remapping is
* saved in the memory itself to avoid the need for allocating buffers. The
* complete remap information is contained in a list of MFNs each containing
* up to REMAP_SIZE MFNs and the start target PFN for doing the remap.
* This enables us to preserve the original mfn sequence while doing the
* remapping at a time when the memory management is capable of allocating
* virtual and physical memory in arbitrary amounts, see 'xen_remap_memory' and
* its callers.
*/
static void __init xen_do_set_identity_and_remap_chunk(
unsigned long start_pfn, unsigned long size, unsigned long remap_pfn)
{
unsigned long buf = (unsigned long)&xen_remap_buf;
unsigned long mfn_save, mfn;
unsigned long ident_pfn_iter, remap_pfn_iter;
unsigned long ident_end_pfn = start_pfn + size;
unsigned long left = size;
unsigned int i, chunk;
WARN_ON(size == 0);
mfn_save = virt_to_mfn(buf);
for (ident_pfn_iter = start_pfn, remap_pfn_iter = remap_pfn;
ident_pfn_iter < ident_end_pfn;
ident_pfn_iter += REMAP_SIZE, remap_pfn_iter += REMAP_SIZE) {
chunk = (left < REMAP_SIZE) ? left : REMAP_SIZE;
/* Map first pfn to xen_remap_buf */
mfn = pfn_to_mfn(ident_pfn_iter);
set_pte_mfn(buf, mfn, PAGE_KERNEL);
/* Save mapping information in page */
xen_remap_buf.next_area_mfn = xen_remap_mfn;
xen_remap_buf.target_pfn = remap_pfn_iter;
xen_remap_buf.size = chunk;
for (i = 0; i < chunk; i++)
xen_remap_buf.mfns[i] = pfn_to_mfn(ident_pfn_iter + i);
/* Put remap buf into list. */
xen_remap_mfn = mfn;
/* Set identity map */
set_phys_range_identity(ident_pfn_iter, ident_pfn_iter + chunk);
left -= chunk;
}
/* Restore old xen_remap_buf mapping */
set_pte_mfn(buf, mfn_save, PAGE_KERNEL);
}
/*
* This function takes a contiguous pfn range that needs to be identity mapped
* and:
*
* 1) Finds a new range of pfns to use to remap based on E820 and remap_pfn.
* 2) Calls the do_ function to actually do the mapping/remapping work.
*
* The goal is to not allocate additional memory but to remap the existing
* pages. In the case of an error the underlying memory is simply released back
* to Xen and not remapped.
*/
static unsigned long __init xen_set_identity_and_remap_chunk(
unsigned long start_pfn, unsigned long end_pfn, unsigned long nr_pages,
unsigned long remap_pfn)
{
unsigned long pfn;
unsigned long i = 0;
unsigned long n = end_pfn - start_pfn;
if (remap_pfn == 0)
remap_pfn = nr_pages;
while (i < n) {
unsigned long cur_pfn = start_pfn + i;
unsigned long left = n - i;
unsigned long size = left;
unsigned long remap_range_size;
/* Do not remap pages beyond the current allocation */
if (cur_pfn >= nr_pages) {
/* Identity map remaining pages */
set_phys_range_identity(cur_pfn, cur_pfn + size);
break;
}
if (cur_pfn + size > nr_pages)
size = nr_pages - cur_pfn;
remap_range_size = xen_find_pfn_range(&remap_pfn);
if (!remap_range_size) {
pr_warn("Unable to find available pfn range, not remapping identity pages\n");
xen_set_identity_and_release_chunk(cur_pfn,
cur_pfn + left, nr_pages);
break;
}
/* Adjust size to fit in current e820 RAM region */
if (size > remap_range_size)
size = remap_range_size;
xen_do_set_identity_and_remap_chunk(cur_pfn, size, remap_pfn);
/* Update variables to reflect new mappings. */
i += size;
remap_pfn += size;
}
/*
* If the PFNs are currently mapped, the VA mapping also needs
* to be updated to be 1:1.
*/
for (pfn = start_pfn; pfn <= max_pfn_mapped && pfn < end_pfn; pfn++)
(void)HYPERVISOR_update_va_mapping(
(unsigned long)__va(pfn << PAGE_SHIFT),
mfn_pte(pfn, PAGE_KERNEL_IO), 0);
return remap_pfn;
}
static unsigned long __init xen_count_remap_pages(
unsigned long start_pfn, unsigned long end_pfn, unsigned long nr_pages,
unsigned long remap_pages)
{
if (start_pfn >= nr_pages)
return remap_pages;
return remap_pages + min(end_pfn, nr_pages) - start_pfn;
}
static unsigned long __init xen_foreach_remap_area(unsigned long nr_pages,
unsigned long (*func)(unsigned long start_pfn, unsigned long end_pfn,
unsigned long nr_pages, unsigned long last_val))
{
phys_addr_t start = 0;
unsigned long ret_val = 0;
const struct e820_entry *entry = xen_e820_table.entries;
int i;
/*
* Combine non-RAM regions and gaps until a RAM region (or the
* end of the map) is reached, then call the provided function
* to perform its duty on the non-RAM region.
*
* The combined non-RAM regions are rounded to a whole number
* of pages so any partial pages are accessible via the 1:1
* mapping. This is needed for some BIOSes that put (for
* example) the DMI tables in a reserved region that begins on
* a non-page boundary.
*/
for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
phys_addr_t end = entry->addr + entry->size;
if (entry->type == E820_TYPE_RAM || i == xen_e820_table.nr_entries - 1) {
unsigned long start_pfn = PFN_DOWN(start);
unsigned long end_pfn = PFN_UP(end);
if (entry->type == E820_TYPE_RAM)
end_pfn = PFN_UP(entry->addr);
if (start_pfn < end_pfn)
ret_val = func(start_pfn, end_pfn, nr_pages,
ret_val);
start = end;
}
}
return ret_val;
}
/*
* Remap the memory prepared in xen_do_set_identity_and_remap_chunk().
* The remap information (which mfn remap to which pfn) is contained in the
* to be remapped memory itself in a linked list anchored at xen_remap_mfn.
* This scheme allows to remap the different chunks in arbitrary order while
* the resulting mapping will be independent from the order.
*/
void __init xen_remap_memory(void)
{
unsigned long buf = (unsigned long)&xen_remap_buf;
unsigned long mfn_save, pfn;
unsigned long remapped = 0;
unsigned int i;
unsigned long pfn_s = ~0UL;
unsigned long len = 0;
mfn_save = virt_to_mfn(buf);
while (xen_remap_mfn != INVALID_P2M_ENTRY) {
/* Map the remap information */
set_pte_mfn(buf, xen_remap_mfn, PAGE_KERNEL);
BUG_ON(xen_remap_mfn != xen_remap_buf.mfns[0]);
pfn = xen_remap_buf.target_pfn;
for (i = 0; i < xen_remap_buf.size; i++) {
xen_update_mem_tables(pfn, xen_remap_buf.mfns[i]);
remapped++;
pfn++;
}
if (pfn_s == ~0UL || pfn == pfn_s) {
pfn_s = xen_remap_buf.target_pfn;
len += xen_remap_buf.size;
} else if (pfn_s + len == xen_remap_buf.target_pfn) {
len += xen_remap_buf.size;
} else {
xen_del_extra_mem(pfn_s, len);
pfn_s = xen_remap_buf.target_pfn;
len = xen_remap_buf.size;
}
xen_remap_mfn = xen_remap_buf.next_area_mfn;
}
if (pfn_s != ~0UL && len)
xen_del_extra_mem(pfn_s, len);
set_pte_mfn(buf, mfn_save, PAGE_KERNEL);
pr_info("Remapped %ld page(s)\n", remapped);
}
static unsigned long __init xen_get_pages_limit(void)
{
unsigned long limit;
limit = MAXMEM / PAGE_SIZE;
if (!xen_initial_domain() && xen_512gb_limit)
limit = GB(512) / PAGE_SIZE;
return limit;
}
static unsigned long __init xen_get_max_pages(void)
{
unsigned long max_pages, limit;
domid_t domid = DOMID_SELF;
long ret;
limit = xen_get_pages_limit();
max_pages = limit;
/*
* For the initial domain we use the maximum reservation as
* the maximum page.
*
* For guest domains the current maximum reservation reflects
* the current maximum rather than the static maximum. In this
* case the e820 map provided to us will cover the static
* maximum region.
*/
if (xen_initial_domain()) {
ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
if (ret > 0)
max_pages = ret;
}
return min(max_pages, limit);
}
static void __init xen_align_and_add_e820_region(phys_addr_t start,
phys_addr_t size, int type)
{
phys_addr_t end = start + size;
/* Align RAM regions to page boundaries. */
if (type == E820_TYPE_RAM) {
start = PAGE_ALIGN(start);
end &= ~((phys_addr_t)PAGE_SIZE - 1);
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Don't allow adding memory not in E820 map while booting the
* system. Once the balloon driver is up it will remove that
* restriction again.
*/
max_mem_size = end;
#endif
}
e820__range_add(start, end - start, type);
}
static void __init xen_ignore_unusable(void)
{
struct e820_entry *entry = xen_e820_table.entries;
unsigned int i;
for (i = 0; i < xen_e820_table.nr_entries; i++, entry++) {
if (entry->type == E820_TYPE_UNUSABLE)
entry->type = E820_TYPE_RAM;
}
}
bool __init xen_is_e820_reserved(phys_addr_t start, phys_addr_t size)
{
struct e820_entry *entry;
unsigned mapcnt;
phys_addr_t end;
if (!size)
return false;
end = start + size;
entry = xen_e820_table.entries;
for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++) {
if (entry->type == E820_TYPE_RAM && entry->addr <= start &&
(entry->addr + entry->size) >= end)
return false;
entry++;
}
return true;
}
/*
* Find a free area in physical memory not yet reserved and compliant with
* E820 map.
* Used to relocate pre-allocated areas like initrd or p2m list which are in
* conflict with the to be used E820 map.
* In case no area is found, return 0. Otherwise return the physical address
* of the area which is already reserved for convenience.
*/
phys_addr_t __init xen_find_free_area(phys_addr_t size)
{
unsigned mapcnt;
phys_addr_t addr, start;
struct e820_entry *entry = xen_e820_table.entries;
for (mapcnt = 0; mapcnt < xen_e820_table.nr_entries; mapcnt++, entry++) {
if (entry->type != E820_TYPE_RAM || entry->size < size)
continue;
start = entry->addr;
for (addr = start; addr < start + size; addr += PAGE_SIZE) {
if (!memblock_is_reserved(addr))
continue;
start = addr + PAGE_SIZE;
if (start + size > entry->addr + entry->size)
break;
}
if (addr >= start + size) {
memblock_reserve(start, size);
return start;
}
}
return 0;
}
/*
* Like memcpy, but with physical addresses for dest and src.
*/
static void __init xen_phys_memcpy(phys_addr_t dest, phys_addr_t src,
phys_addr_t n)
{
phys_addr_t dest_off, src_off, dest_len, src_len, len;
void *from, *to;
while (n) {
dest_off = dest & ~PAGE_MASK;
src_off = src & ~PAGE_MASK;
dest_len = n;
if (dest_len > (NR_FIX_BTMAPS << PAGE_SHIFT) - dest_off)
dest_len = (NR_FIX_BTMAPS << PAGE_SHIFT) - dest_off;
src_len = n;
if (src_len > (NR_FIX_BTMAPS << PAGE_SHIFT) - src_off)
src_len = (NR_FIX_BTMAPS << PAGE_SHIFT) - src_off;
len = min(dest_len, src_len);
to = early_memremap(dest - dest_off, dest_len + dest_off);
from = early_memremap(src - src_off, src_len + src_off);
memcpy(to, from, len);
early_memunmap(to, dest_len + dest_off);
early_memunmap(from, src_len + src_off);
n -= len;
dest += len;
src += len;
}
}
/*
* Reserve Xen mfn_list.
*/
static void __init xen_reserve_xen_mfnlist(void)
{
phys_addr_t start, size;
if (xen_start_info->mfn_list >= __START_KERNEL_map) {
start = __pa(xen_start_info->mfn_list);
size = PFN_ALIGN(xen_start_info->nr_pages *
sizeof(unsigned long));
} else {
start = PFN_PHYS(xen_start_info->first_p2m_pfn);
size = PFN_PHYS(xen_start_info->nr_p2m_frames);
}
memblock_reserve(start, size);
if (!xen_is_e820_reserved(start, size))
return;
xen_relocate_p2m();
memblock_free(start, size);
}
/**
* machine_specific_memory_setup - Hook for machine specific memory setup.
**/
char * __init xen_memory_setup(void)
{
unsigned long max_pfn, pfn_s, n_pfns;
phys_addr_t mem_end, addr, size, chunk_size;
u32 type;
int rc;
struct xen_memory_map memmap;
unsigned long max_pages;
unsigned long extra_pages = 0;
int i;
int op;
xen_parse_512gb();
max_pfn = xen_get_pages_limit();
max_pfn = min(max_pfn, xen_start_info->nr_pages);
mem_end = PFN_PHYS(max_pfn);
memmap.nr_entries = ARRAY_SIZE(xen_e820_table.entries);
set_xen_guest_handle(memmap.buffer, xen_e820_table.entries);
#if defined(CONFIG_MEMORY_HOTPLUG) && defined(CONFIG_XEN_BALLOON)
xen_saved_max_mem_size = max_mem_size;
#endif
op = xen_initial_domain() ?
XENMEM_machine_memory_map :
XENMEM_memory_map;
rc = HYPERVISOR_memory_op(op, &memmap);
if (rc == -ENOSYS) {
BUG_ON(xen_initial_domain());
memmap.nr_entries = 1;
xen_e820_table.entries[0].addr = 0ULL;
xen_e820_table.entries[0].size = mem_end;
/* 8MB slack (to balance backend allocations). */
xen_e820_table.entries[0].size += 8ULL << 20;
xen_e820_table.entries[0].type = E820_TYPE_RAM;
rc = 0;
}
BUG_ON(rc);
BUG_ON(memmap.nr_entries == 0);
xen_e820_table.nr_entries = memmap.nr_entries;
/*
* Xen won't allow a 1:1 mapping to be created to UNUSABLE
* regions, so if we're using the machine memory map leave the
* region as RAM as it is in the pseudo-physical map.
*
* UNUSABLE regions in domUs are not handled and will need
* a patch in the future.
*/
if (xen_initial_domain())
xen_ignore_unusable();
/* Make sure the Xen-supplied memory map is well-ordered. */
e820__update_table(&xen_e820_table);
max_pages = xen_get_max_pages();
/* How many extra pages do we need due to remapping? */
max_pages += xen_foreach_remap_area(max_pfn, xen_count_remap_pages);
if (max_pages > max_pfn)
extra_pages += max_pages - max_pfn;
/*
* Clamp the amount of extra memory to a EXTRA_MEM_RATIO
* factor the base size.
*
* Make sure we have no memory above max_pages, as this area
* isn't handled by the p2m management.
*/
extra_pages = min3(EXTRA_MEM_RATIO * min(max_pfn, PFN_DOWN(MAXMEM)),
extra_pages, max_pages - max_pfn);
i = 0;
addr = xen_e820_table.entries[0].addr;
size = xen_e820_table.entries[0].size;
while (i < xen_e820_table.nr_entries) {
bool discard = false;
chunk_size = size;
type = xen_e820_table.entries[i].type;
if (type == E820_TYPE_RAM) {
if (addr < mem_end) {
chunk_size = min(size, mem_end - addr);
} else if (extra_pages) {
chunk_size = min(size, PFN_PHYS(extra_pages));
pfn_s = PFN_UP(addr);
n_pfns = PFN_DOWN(addr + chunk_size) - pfn_s;
extra_pages -= n_pfns;
xen_add_extra_mem(pfn_s, n_pfns);
xen_max_p2m_pfn = pfn_s + n_pfns;
} else
discard = true;
}
if (!discard)
xen_align_and_add_e820_region(addr, chunk_size, type);
addr += chunk_size;
size -= chunk_size;
if (size == 0) {
i++;
if (i < xen_e820_table.nr_entries) {
addr = xen_e820_table.entries[i].addr;
size = xen_e820_table.entries[i].size;
}
}
}
/*
* Set the rest as identity mapped, in case PCI BARs are
* located here.
*/
set_phys_range_identity(addr / PAGE_SIZE, ~0ul);
/*
* In domU, the ISA region is normal, usable memory, but we
* reserve ISA memory anyway because too many things poke
* about in there.
*/
e820__range_add(ISA_START_ADDRESS, ISA_END_ADDRESS - ISA_START_ADDRESS, E820_TYPE_RESERVED);
e820__update_table(e820_table);
/*
* Check whether the kernel itself conflicts with the target E820 map.
* Failing now is better than running into weird problems later due
* to relocating (and even reusing) pages with kernel text or data.
*/
if (xen_is_e820_reserved(__pa_symbol(_text),
__pa_symbol(__bss_stop) - __pa_symbol(_text))) {
xen_raw_console_write("Xen hypervisor allocated kernel memory conflicts with E820 map\n");
BUG();
}
/*
* Check for a conflict of the hypervisor supplied page tables with
* the target E820 map.
*/
xen_pt_check_e820();
xen_reserve_xen_mfnlist();
/* Check for a conflict of the initrd with the target E820 map. */
if (xen_is_e820_reserved(boot_params.hdr.ramdisk_image,
boot_params.hdr.ramdisk_size)) {
phys_addr_t new_area, start, size;
new_area = xen_find_free_area(boot_params.hdr.ramdisk_size);
if (!new_area) {
xen_raw_console_write("Can't find new memory area for initrd needed due to E820 map conflict\n");
BUG();
}
start = boot_params.hdr.ramdisk_image;
size = boot_params.hdr.ramdisk_size;
xen_phys_memcpy(new_area, start, size);
pr_info("initrd moved from [mem %#010llx-%#010llx] to [mem %#010llx-%#010llx]\n",
start, start + size, new_area, new_area + size);
memblock_free(start, size);
boot_params.hdr.ramdisk_image = new_area;
boot_params.ext_ramdisk_image = new_area >> 32;
}
/*
* Set identity map on non-RAM pages and prepare remapping the
* underlying RAM.
*/
xen_foreach_remap_area(max_pfn, xen_set_identity_and_remap_chunk);
pr_info("Released %ld page(s)\n", xen_released_pages);
return "Xen";
}
static int register_callback(unsigned type, const void *func)
{
struct callback_register callback = {
.type = type,
.address = XEN_CALLBACK(__KERNEL_CS, func),
.flags = CALLBACKF_mask_events,
};
return HYPERVISOR_callback_op(CALLBACKOP_register, &callback);
}
void xen_enable_sysenter(void)
{
int ret;
unsigned sysenter_feature;
sysenter_feature = X86_FEATURE_SYSENTER32;
if (!boot_cpu_has(sysenter_feature))
return;
ret = register_callback(CALLBACKTYPE_sysenter, xen_sysenter_target);
if(ret != 0)
setup_clear_cpu_cap(sysenter_feature);
}
void xen_enable_syscall(void)
{
int ret;
ret = register_callback(CALLBACKTYPE_syscall, xen_syscall_target);
if (ret != 0) {
printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
/* Pretty fatal; 64-bit userspace has no other
mechanism for syscalls. */
}
if (boot_cpu_has(X86_FEATURE_SYSCALL32)) {
ret = register_callback(CALLBACKTYPE_syscall32,
xen_syscall32_target);
if (ret != 0)
setup_clear_cpu_cap(X86_FEATURE_SYSCALL32);
}
}
static void __init xen_pvmmu_arch_setup(void)
{
HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_4gb_segments);
HYPERVISOR_vm_assist(VMASST_CMD_enable, VMASST_TYPE_writable_pagetables);
HYPERVISOR_vm_assist(VMASST_CMD_enable,
VMASST_TYPE_pae_extended_cr3);
if (register_callback(CALLBACKTYPE_event,
xen_asm_exc_xen_hypervisor_callback) ||
register_callback(CALLBACKTYPE_failsafe, xen_failsafe_callback))
BUG();
xen_enable_sysenter();
xen_enable_syscall();
}
/* This function is not called for HVM domains */
void __init xen_arch_setup(void)
{
xen_panic_handler_init();
xen_pvmmu_arch_setup();
#ifdef CONFIG_ACPI
if (!(xen_start_info->flags & SIF_INITDOMAIN)) {
printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
disable_acpi();
}
#endif
memcpy(boot_command_line, xen_start_info->cmd_line,
MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
/* Set up idle, making sure it calls safe_halt() pvop */
disable_cpuidle();
disable_cpufreq();
WARN_ON(xen_set_default_idle());
#ifdef CONFIG_NUMA
numa_off = 1;
#endif
}